Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Robert Moore | 773 | 62.19% | 16 | 45.71% |
Lin Ming | 194 | 15.61% | 1 | 2.86% |
Len Brown | 86 | 6.92% | 2 | 5.71% |
Linus Torvalds | 59 | 4.75% | 3 | 8.57% |
Andy Grover | 48 | 3.86% | 3 | 8.57% |
Mika Westerberg | 44 | 3.54% | 5 | 14.29% |
Linus Torvalds (pre-git) | 33 | 2.65% | 1 | 2.86% |
Erik Schmauss | 4 | 0.32% | 2 | 5.71% |
Patrick Mochel | 1 | 0.08% | 1 | 2.86% |
Joe Perches | 1 | 0.08% | 1 | 2.86% |
Total | 1243 | 35 |
// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 /******************************************************************************* * * Module Name: utresrc - Resource management utilities * ******************************************************************************/ #include <acpi/acpi.h> #include "accommon.h" #include "acresrc.h" #define _COMPONENT ACPI_UTILITIES ACPI_MODULE_NAME("utresrc") /* * Base sizes of the raw AML resource descriptors, indexed by resource type. * Zero indicates a reserved (and therefore invalid) resource type. */ const u8 acpi_gbl_resource_aml_sizes[] = { /* Small descriptors */ 0, 0, 0, 0, ACPI_AML_SIZE_SMALL(struct aml_resource_irq), ACPI_AML_SIZE_SMALL(struct aml_resource_dma), ACPI_AML_SIZE_SMALL(struct aml_resource_start_dependent), ACPI_AML_SIZE_SMALL(struct aml_resource_end_dependent), ACPI_AML_SIZE_SMALL(struct aml_resource_io), ACPI_AML_SIZE_SMALL(struct aml_resource_fixed_io), ACPI_AML_SIZE_SMALL(struct aml_resource_fixed_dma), 0, 0, 0, ACPI_AML_SIZE_SMALL(struct aml_resource_vendor_small), ACPI_AML_SIZE_SMALL(struct aml_resource_end_tag), /* Large descriptors */ 0, ACPI_AML_SIZE_LARGE(struct aml_resource_memory24), ACPI_AML_SIZE_LARGE(struct aml_resource_generic_register), 0, ACPI_AML_SIZE_LARGE(struct aml_resource_vendor_large), ACPI_AML_SIZE_LARGE(struct aml_resource_memory32), ACPI_AML_SIZE_LARGE(struct aml_resource_fixed_memory32), ACPI_AML_SIZE_LARGE(struct aml_resource_address32), ACPI_AML_SIZE_LARGE(struct aml_resource_address16), ACPI_AML_SIZE_LARGE(struct aml_resource_extended_irq), ACPI_AML_SIZE_LARGE(struct aml_resource_address64), ACPI_AML_SIZE_LARGE(struct aml_resource_extended_address64), ACPI_AML_SIZE_LARGE(struct aml_resource_gpio), ACPI_AML_SIZE_LARGE(struct aml_resource_pin_function), ACPI_AML_SIZE_LARGE(struct aml_resource_common_serialbus), ACPI_AML_SIZE_LARGE(struct aml_resource_pin_config), ACPI_AML_SIZE_LARGE(struct aml_resource_pin_group), ACPI_AML_SIZE_LARGE(struct aml_resource_pin_group_function), ACPI_AML_SIZE_LARGE(struct aml_resource_pin_group_config), }; const u8 acpi_gbl_resource_aml_serial_bus_sizes[] = { 0, ACPI_AML_SIZE_LARGE(struct aml_resource_i2c_serialbus), ACPI_AML_SIZE_LARGE(struct aml_resource_spi_serialbus), ACPI_AML_SIZE_LARGE(struct aml_resource_uart_serialbus), ACPI_AML_SIZE_LARGE(struct aml_resource_csi2_serialbus), }; /* * Resource types, used to validate the resource length field. * The length of fixed-length types must match exactly, variable * lengths must meet the minimum required length, etc. * Zero indicates a reserved (and therefore invalid) resource type. */ static const u8 acpi_gbl_resource_types[] = { /* Small descriptors */ 0, 0, 0, 0, ACPI_SMALL_VARIABLE_LENGTH, /* 04 IRQ */ ACPI_FIXED_LENGTH, /* 05 DMA */ ACPI_SMALL_VARIABLE_LENGTH, /* 06 start_dependent_functions */ ACPI_FIXED_LENGTH, /* 07 end_dependent_functions */ ACPI_FIXED_LENGTH, /* 08 IO */ ACPI_FIXED_LENGTH, /* 09 fixed_IO */ ACPI_FIXED_LENGTH, /* 0A fixed_DMA */ 0, 0, 0, ACPI_VARIABLE_LENGTH, /* 0E vendor_short */ ACPI_FIXED_LENGTH, /* 0F end_tag */ /* Large descriptors */ 0, ACPI_FIXED_LENGTH, /* 01 Memory24 */ ACPI_FIXED_LENGTH, /* 02 generic_register */ 0, ACPI_VARIABLE_LENGTH, /* 04 vendor_long */ ACPI_FIXED_LENGTH, /* 05 Memory32 */ ACPI_FIXED_LENGTH, /* 06 memory32_fixed */ ACPI_VARIABLE_LENGTH, /* 07 Dword* address */ ACPI_VARIABLE_LENGTH, /* 08 Word* address */ ACPI_VARIABLE_LENGTH, /* 09 extended_IRQ */ ACPI_VARIABLE_LENGTH, /* 0A Qword* address */ ACPI_FIXED_LENGTH, /* 0B Extended* address */ ACPI_VARIABLE_LENGTH, /* 0C Gpio* */ ACPI_VARIABLE_LENGTH, /* 0D pin_function */ ACPI_VARIABLE_LENGTH, /* 0E *serial_bus */ ACPI_VARIABLE_LENGTH, /* 0F pin_config */ ACPI_VARIABLE_LENGTH, /* 10 pin_group */ ACPI_VARIABLE_LENGTH, /* 11 pin_group_function */ ACPI_VARIABLE_LENGTH, /* 12 pin_group_config */ }; /******************************************************************************* * * FUNCTION: acpi_ut_walk_aml_resources * * PARAMETERS: walk_state - Current walk info * PARAMETERS: aml - Pointer to the raw AML resource template * aml_length - Length of the entire template * user_function - Called once for each descriptor found. If * NULL, a pointer to the end_tag is returned * context - Passed to user_function * * RETURN: Status * * DESCRIPTION: Walk a raw AML resource list(buffer). User function called * once for each resource found. * ******************************************************************************/ acpi_status acpi_ut_walk_aml_resources(struct acpi_walk_state *walk_state, u8 *aml, acpi_size aml_length, acpi_walk_aml_callback user_function, void **context) { acpi_status status; u8 *end_aml; u8 resource_index; u32 length; u32 offset = 0; u8 end_tag[2] = { 0x79, 0x00 }; ACPI_FUNCTION_TRACE(ut_walk_aml_resources); /* The absolute minimum resource template is one end_tag descriptor */ if (aml_length < sizeof(struct aml_resource_end_tag)) { return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); } /* Point to the end of the resource template buffer */ end_aml = aml + aml_length; /* Walk the byte list, abort on any invalid descriptor type or length */ while (aml < end_aml) { /* Validate the Resource Type and Resource Length */ status = acpi_ut_validate_resource(walk_state, aml, &resource_index); if (ACPI_FAILURE(status)) { /* * Exit on failure. Cannot continue because the descriptor * length may be bogus also. */ return_ACPI_STATUS(status); } /* Get the length of this descriptor */ length = acpi_ut_get_descriptor_length(aml); /* Invoke the user function */ if (user_function) { status = user_function(aml, length, offset, resource_index, context); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } } /* An end_tag descriptor terminates this resource template */ if (acpi_ut_get_resource_type(aml) == ACPI_RESOURCE_NAME_END_TAG) { /* * There must be at least one more byte in the buffer for * the 2nd byte of the end_tag */ if ((aml + 1) >= end_aml) { return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); } /* * Don't attempt to perform any validation on the 2nd byte. * Although all known ASL compilers insert a zero for the 2nd * byte, it can also be a checksum (as per the ACPI spec), * and this is occasionally seen in the field. July 2017. */ /* Return the pointer to the end_tag if requested */ if (!user_function) { *context = aml; } /* Normal exit */ return_ACPI_STATUS(AE_OK); } aml += length; offset += length; } /* Did not find an end_tag descriptor */ if (user_function) { /* Insert an end_tag anyway. acpi_rs_get_list_length always leaves room */ (void)acpi_ut_validate_resource(walk_state, end_tag, &resource_index); status = user_function(end_tag, 2, offset, resource_index, context); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } } return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); } /******************************************************************************* * * FUNCTION: acpi_ut_validate_resource * * PARAMETERS: walk_state - Current walk info * aml - Pointer to the raw AML resource descriptor * return_index - Where the resource index is returned. NULL * if the index is not required. * * RETURN: Status, and optionally the Index into the global resource tables * * DESCRIPTION: Validate an AML resource descriptor by checking the Resource * Type and Resource Length. Returns an index into the global * resource information/dispatch tables for later use. * ******************************************************************************/ acpi_status acpi_ut_validate_resource(struct acpi_walk_state *walk_state, void *aml, u8 *return_index) { union aml_resource *aml_resource; u8 resource_type; u8 resource_index; acpi_rs_length resource_length; acpi_rs_length minimum_resource_length; ACPI_FUNCTION_ENTRY(); /* * 1) Validate the resource_type field (Byte 0) */ resource_type = ACPI_GET8(aml); /* * Byte 0 contains the descriptor name (Resource Type) * Examine the large/small bit in the resource header */ if (resource_type & ACPI_RESOURCE_NAME_LARGE) { /* Verify the large resource type (name) against the max */ if (resource_type > ACPI_RESOURCE_NAME_LARGE_MAX) { goto invalid_resource; } /* * Large Resource Type -- bits 6:0 contain the name * Translate range 0x80-0x8B to index range 0x10-0x1B */ resource_index = (u8) (resource_type - 0x70); } else { /* * Small Resource Type -- bits 6:3 contain the name * Shift range to index range 0x00-0x0F */ resource_index = (u8) ((resource_type & ACPI_RESOURCE_NAME_SMALL_MASK) >> 3); } /* * Check validity of the resource type, via acpi_gbl_resource_types. * Zero indicates an invalid resource. */ if (!acpi_gbl_resource_types[resource_index]) { goto invalid_resource; } /* * Validate the resource_length field. This ensures that the length * is at least reasonable, and guarantees that it is non-zero. */ resource_length = acpi_ut_get_resource_length(aml); minimum_resource_length = acpi_gbl_resource_aml_sizes[resource_index]; /* Validate based upon the type of resource - fixed length or variable */ switch (acpi_gbl_resource_types[resource_index]) { case ACPI_FIXED_LENGTH: /* Fixed length resource, length must match exactly */ if (resource_length != minimum_resource_length) { goto bad_resource_length; } break; case ACPI_VARIABLE_LENGTH: /* Variable length resource, length must be at least the minimum */ if (resource_length < minimum_resource_length) { goto bad_resource_length; } break; case ACPI_SMALL_VARIABLE_LENGTH: /* Small variable length resource, length can be (Min) or (Min-1) */ if ((resource_length > minimum_resource_length) || (resource_length < (minimum_resource_length - 1))) { goto bad_resource_length; } break; default: /* Shouldn't happen (because of validation earlier), but be sure */ goto invalid_resource; } aml_resource = ACPI_CAST_PTR(union aml_resource, aml); if (resource_type == ACPI_RESOURCE_NAME_SERIAL_BUS) { /* Validate the bus_type field */ if ((aml_resource->common_serial_bus.type == 0) || (aml_resource->common_serial_bus.type > AML_RESOURCE_MAX_SERIALBUSTYPE)) { if (walk_state) { ACPI_ERROR((AE_INFO, "Invalid/unsupported SerialBus resource descriptor: BusType 0x%2.2X", aml_resource->common_serial_bus. type)); } return (AE_AML_INVALID_RESOURCE_TYPE); } } /* Optionally return the resource table index */ if (return_index) { *return_index = resource_index; } return (AE_OK); invalid_resource: if (walk_state) { ACPI_ERROR((AE_INFO, "Invalid/unsupported resource descriptor: Type 0x%2.2X", resource_type)); } return (AE_AML_INVALID_RESOURCE_TYPE); bad_resource_length: if (walk_state) { ACPI_ERROR((AE_INFO, "Invalid resource descriptor length: Type " "0x%2.2X, Length 0x%4.4X, MinLength 0x%4.4X", resource_type, resource_length, minimum_resource_length)); } return (AE_AML_BAD_RESOURCE_LENGTH); } /******************************************************************************* * * FUNCTION: acpi_ut_get_resource_type * * PARAMETERS: aml - Pointer to the raw AML resource descriptor * * RETURN: The Resource Type with no extraneous bits (except the * Large/Small descriptor bit -- this is left alone) * * DESCRIPTION: Extract the Resource Type/Name from the first byte of * a resource descriptor. * ******************************************************************************/ u8 acpi_ut_get_resource_type(void *aml) { ACPI_FUNCTION_ENTRY(); /* * Byte 0 contains the descriptor name (Resource Type) * Examine the large/small bit in the resource header */ if (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_LARGE) { /* Large Resource Type -- bits 6:0 contain the name */ return (ACPI_GET8(aml)); } else { /* Small Resource Type -- bits 6:3 contain the name */ return ((u8) (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_SMALL_MASK)); } } /******************************************************************************* * * FUNCTION: acpi_ut_get_resource_length * * PARAMETERS: aml - Pointer to the raw AML resource descriptor * * RETURN: Byte Length * * DESCRIPTION: Get the "Resource Length" of a raw AML descriptor. By * definition, this does not include the size of the descriptor * header or the length field itself. * ******************************************************************************/ u16 acpi_ut_get_resource_length(void *aml) { acpi_rs_length resource_length; ACPI_FUNCTION_ENTRY(); /* * Byte 0 contains the descriptor name (Resource Type) * Examine the large/small bit in the resource header */ if (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_LARGE) { /* Large Resource type -- bytes 1-2 contain the 16-bit length */ ACPI_MOVE_16_TO_16(&resource_length, ACPI_ADD_PTR(u8, aml, 1)); } else { /* Small Resource type -- bits 2:0 of byte 0 contain the length */ resource_length = (u16) (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_SMALL_LENGTH_MASK); } return (resource_length); } /******************************************************************************* * * FUNCTION: acpi_ut_get_resource_header_length * * PARAMETERS: aml - Pointer to the raw AML resource descriptor * * RETURN: Length of the AML header (depends on large/small descriptor) * * DESCRIPTION: Get the length of the header for this resource. * ******************************************************************************/ u8 acpi_ut_get_resource_header_length(void *aml) { ACPI_FUNCTION_ENTRY(); /* Examine the large/small bit in the resource header */ if (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_LARGE) { return (sizeof(struct aml_resource_large_header)); } else { return (sizeof(struct aml_resource_small_header)); } } /******************************************************************************* * * FUNCTION: acpi_ut_get_descriptor_length * * PARAMETERS: aml - Pointer to the raw AML resource descriptor * * RETURN: Byte length * * DESCRIPTION: Get the total byte length of a raw AML descriptor, including the * length of the descriptor header and the length field itself. * Used to walk descriptor lists. * ******************************************************************************/ u32 acpi_ut_get_descriptor_length(void *aml) { ACPI_FUNCTION_ENTRY(); /* * Get the Resource Length (does not include header length) and add * the header length (depends on if this is a small or large resource) */ return (acpi_ut_get_resource_length(aml) + acpi_ut_get_resource_header_length(aml)); } /******************************************************************************* * * FUNCTION: acpi_ut_get_resource_end_tag * * PARAMETERS: obj_desc - The resource template buffer object * end_tag - Where the pointer to the end_tag is returned * * RETURN: Status, pointer to the end tag * * DESCRIPTION: Find the end_tag resource descriptor in an AML resource template * Note: allows a buffer length of zero. * ******************************************************************************/ acpi_status acpi_ut_get_resource_end_tag(union acpi_operand_object *obj_desc, u8 **end_tag) { acpi_status status; ACPI_FUNCTION_TRACE(ut_get_resource_end_tag); /* Allow a buffer length of zero */ if (!obj_desc->buffer.length) { *end_tag = obj_desc->buffer.pointer; return_ACPI_STATUS(AE_OK); } /* Validate the template and get a pointer to the end_tag */ status = acpi_ut_walk_aml_resources(NULL, obj_desc->buffer.pointer, obj_desc->buffer.length, NULL, (void **)end_tag); return_ACPI_STATUS(status); }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1