Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Heiko Stübner | 2593 | 99.12% | 1 | 16.67% |
Sam Ravnborg | 16 | 0.61% | 1 | 16.67% |
Ville Syrjälä | 5 | 0.19% | 2 | 33.33% |
Nicolas Boichat | 1 | 0.04% | 1 | 16.67% |
Uwe Kleine-König | 1 | 0.04% | 1 | 16.67% |
Total | 2616 | 6 |
// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (c) 2019 Theobroma Systems Design und Consulting GmbH * * base on panel-kingdisplay-kd097d04.c * Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd */ #include <linux/backlight.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> #include <linux/module.h> #include <linux/of.h> #include <linux/regulator/consumer.h> #include <video/mipi_display.h> #include <drm/drm_crtc.h> #include <drm/drm_device.h> #include <drm/drm_mipi_dsi.h> #include <drm/drm_modes.h> #include <drm/drm_panel.h> struct ltk500hd1829 { struct device *dev; struct drm_panel panel; struct gpio_desc *reset_gpio; struct regulator *vcc; struct regulator *iovcc; bool prepared; }; struct ltk500hd1829_cmd { char cmd; char data; }; /* * There is no description in the Reference Manual about these commands. * We received them from the vendor, so just use them as is. */ static const struct ltk500hd1829_cmd init_code[] = { { 0xE0, 0x00 }, { 0xE1, 0x93 }, { 0xE2, 0x65 }, { 0xE3, 0xF8 }, { 0x80, 0x03 }, { 0xE0, 0x04 }, { 0x2D, 0x03 }, { 0xE0, 0x01 }, { 0x00, 0x00 }, { 0x01, 0xB6 }, { 0x03, 0x00 }, { 0x04, 0xC5 }, { 0x17, 0x00 }, { 0x18, 0xBF }, { 0x19, 0x01 }, { 0x1A, 0x00 }, { 0x1B, 0xBF }, { 0x1C, 0x01 }, { 0x1F, 0x7C }, { 0x20, 0x26 }, { 0x21, 0x26 }, { 0x22, 0x4E }, { 0x37, 0x09 }, { 0x38, 0x04 }, { 0x39, 0x08 }, { 0x3A, 0x1F }, { 0x3B, 0x1F }, { 0x3C, 0x78 }, { 0x3D, 0xFF }, { 0x3E, 0xFF }, { 0x3F, 0x00 }, { 0x40, 0x04 }, { 0x41, 0xA0 }, { 0x43, 0x0F }, { 0x44, 0x0A }, { 0x45, 0x24 }, { 0x55, 0x01 }, { 0x56, 0x01 }, { 0x57, 0xA5 }, { 0x58, 0x0A }, { 0x59, 0x4A }, { 0x5A, 0x38 }, { 0x5B, 0x10 }, { 0x5C, 0x19 }, { 0x5D, 0x7C }, { 0x5E, 0x64 }, { 0x5F, 0x54 }, { 0x60, 0x48 }, { 0x61, 0x44 }, { 0x62, 0x35 }, { 0x63, 0x3A }, { 0x64, 0x24 }, { 0x65, 0x3B }, { 0x66, 0x39 }, { 0x67, 0x37 }, { 0x68, 0x56 }, { 0x69, 0x41 }, { 0x6A, 0x47 }, { 0x6B, 0x2F }, { 0x6C, 0x23 }, { 0x6D, 0x13 }, { 0x6E, 0x02 }, { 0x6F, 0x08 }, { 0x70, 0x7C }, { 0x71, 0x64 }, { 0x72, 0x54 }, { 0x73, 0x48 }, { 0x74, 0x44 }, { 0x75, 0x35 }, { 0x76, 0x3A }, { 0x77, 0x22 }, { 0x78, 0x3B }, { 0x79, 0x39 }, { 0x7A, 0x38 }, { 0x7B, 0x52 }, { 0x7C, 0x41 }, { 0x7D, 0x47 }, { 0x7E, 0x2F }, { 0x7F, 0x23 }, { 0x80, 0x13 }, { 0x81, 0x02 }, { 0x82, 0x08 }, { 0xE0, 0x02 }, { 0x00, 0x57 }, { 0x01, 0x77 }, { 0x02, 0x44 }, { 0x03, 0x46 }, { 0x04, 0x48 }, { 0x05, 0x4A }, { 0x06, 0x4C }, { 0x07, 0x4E }, { 0x08, 0x50 }, { 0x09, 0x55 }, { 0x0A, 0x52 }, { 0x0B, 0x55 }, { 0x0C, 0x55 }, { 0x0D, 0x55 }, { 0x0E, 0x55 }, { 0x0F, 0x55 }, { 0x10, 0x55 }, { 0x11, 0x55 }, { 0x12, 0x55 }, { 0x13, 0x40 }, { 0x14, 0x55 }, { 0x15, 0x55 }, { 0x16, 0x57 }, { 0x17, 0x77 }, { 0x18, 0x45 }, { 0x19, 0x47 }, { 0x1A, 0x49 }, { 0x1B, 0x4B }, { 0x1C, 0x4D }, { 0x1D, 0x4F }, { 0x1E, 0x51 }, { 0x1F, 0x55 }, { 0x20, 0x53 }, { 0x21, 0x55 }, { 0x22, 0x55 }, { 0x23, 0x55 }, { 0x24, 0x55 }, { 0x25, 0x55 }, { 0x26, 0x55 }, { 0x27, 0x55 }, { 0x28, 0x55 }, { 0x29, 0x41 }, { 0x2A, 0x55 }, { 0x2B, 0x55 }, { 0x2C, 0x57 }, { 0x2D, 0x77 }, { 0x2E, 0x4F }, { 0x2F, 0x4D }, { 0x30, 0x4B }, { 0x31, 0x49 }, { 0x32, 0x47 }, { 0x33, 0x45 }, { 0x34, 0x41 }, { 0x35, 0x55 }, { 0x36, 0x53 }, { 0x37, 0x55 }, { 0x38, 0x55 }, { 0x39, 0x55 }, { 0x3A, 0x55 }, { 0x3B, 0x55 }, { 0x3C, 0x55 }, { 0x3D, 0x55 }, { 0x3E, 0x55 }, { 0x3F, 0x51 }, { 0x40, 0x55 }, { 0x41, 0x55 }, { 0x42, 0x57 }, { 0x43, 0x77 }, { 0x44, 0x4E }, { 0x45, 0x4C }, { 0x46, 0x4A }, { 0x47, 0x48 }, { 0x48, 0x46 }, { 0x49, 0x44 }, { 0x4A, 0x40 }, { 0x4B, 0x55 }, { 0x4C, 0x52 }, { 0x4D, 0x55 }, { 0x4E, 0x55 }, { 0x4F, 0x55 }, { 0x50, 0x55 }, { 0x51, 0x55 }, { 0x52, 0x55 }, { 0x53, 0x55 }, { 0x54, 0x55 }, { 0x55, 0x50 }, { 0x56, 0x55 }, { 0x57, 0x55 }, { 0x58, 0x40 }, { 0x59, 0x00 }, { 0x5A, 0x00 }, { 0x5B, 0x10 }, { 0x5C, 0x09 }, { 0x5D, 0x30 }, { 0x5E, 0x01 }, { 0x5F, 0x02 }, { 0x60, 0x30 }, { 0x61, 0x03 }, { 0x62, 0x04 }, { 0x63, 0x06 }, { 0x64, 0x6A }, { 0x65, 0x75 }, { 0x66, 0x0F }, { 0x67, 0xB3 }, { 0x68, 0x0B }, { 0x69, 0x06 }, { 0x6A, 0x6A }, { 0x6B, 0x10 }, { 0x6C, 0x00 }, { 0x6D, 0x04 }, { 0x6E, 0x04 }, { 0x6F, 0x88 }, { 0x70, 0x00 }, { 0x71, 0x00 }, { 0x72, 0x06 }, { 0x73, 0x7B }, { 0x74, 0x00 }, { 0x75, 0xBC }, { 0x76, 0x00 }, { 0x77, 0x05 }, { 0x78, 0x2E }, { 0x79, 0x00 }, { 0x7A, 0x00 }, { 0x7B, 0x00 }, { 0x7C, 0x00 }, { 0x7D, 0x03 }, { 0x7E, 0x7B }, { 0xE0, 0x04 }, { 0x09, 0x10 }, { 0x2B, 0x2B }, { 0x2E, 0x44 }, { 0xE0, 0x00 }, { 0xE6, 0x02 }, { 0xE7, 0x02 }, { 0x35, 0x00 }, }; static inline struct ltk500hd1829 *panel_to_ltk500hd1829(struct drm_panel *panel) { return container_of(panel, struct ltk500hd1829, panel); } static int ltk500hd1829_unprepare(struct drm_panel *panel) { struct ltk500hd1829 *ctx = panel_to_ltk500hd1829(panel); struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); int ret; if (!ctx->prepared) return 0; ret = mipi_dsi_dcs_set_display_off(dsi); if (ret < 0) dev_err(panel->dev, "failed to set display off: %d\n", ret); ret = mipi_dsi_dcs_enter_sleep_mode(dsi); if (ret < 0) { dev_err(panel->dev, "failed to enter sleep mode: %d\n", ret); } /* 120ms to enter sleep mode */ msleep(120); regulator_disable(ctx->iovcc); regulator_disable(ctx->vcc); ctx->prepared = false; return 0; } static int ltk500hd1829_prepare(struct drm_panel *panel) { struct ltk500hd1829 *ctx = panel_to_ltk500hd1829(panel); struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); unsigned int i; int ret; if (ctx->prepared) return 0; ret = regulator_enable(ctx->vcc); if (ret < 0) { dev_err(ctx->dev, "Failed to enable vci supply: %d\n", ret); return ret; } ret = regulator_enable(ctx->iovcc); if (ret < 0) { dev_err(ctx->dev, "Failed to enable iovcc supply: %d\n", ret); goto disable_vcc; } gpiod_set_value_cansleep(ctx->reset_gpio, 1); /* tRW: 10us */ usleep_range(10, 20); gpiod_set_value_cansleep(ctx->reset_gpio, 0); /* tRT: >= 5ms */ usleep_range(5000, 6000); for (i = 0; i < ARRAY_SIZE(init_code); i++) { ret = mipi_dsi_generic_write(dsi, &init_code[i], sizeof(struct ltk500hd1829_cmd)); if (ret < 0) { dev_err(panel->dev, "failed to write init cmds: %d\n", ret); goto disable_iovcc; } } ret = mipi_dsi_dcs_exit_sleep_mode(dsi); if (ret < 0) { dev_err(panel->dev, "failed to exit sleep mode: %d\n", ret); goto disable_iovcc; } /* 120ms to exit sleep mode */ msleep(120); ret = mipi_dsi_dcs_set_display_on(dsi); if (ret < 0) { dev_err(panel->dev, "failed to set display on: %d\n", ret); goto disable_iovcc; } ctx->prepared = true; return 0; disable_iovcc: regulator_disable(ctx->iovcc); disable_vcc: regulator_disable(ctx->vcc); return ret; } static const struct drm_display_mode default_mode = { .hdisplay = 720, .hsync_start = 720 + 50, .hsync_end = 720 + 50 + 50, .htotal = 720 + 50 + 50 + 50, .vdisplay = 1280, .vsync_start = 1280 + 30, .vsync_end = 1280 + 30 + 4, .vtotal = 1280 + 30 + 4 + 12, .clock = 69217, .width_mm = 62, .height_mm = 110, }; static int ltk500hd1829_get_modes(struct drm_panel *panel, struct drm_connector *connector) { struct ltk500hd1829 *ctx = panel_to_ltk500hd1829(panel); struct drm_display_mode *mode; mode = drm_mode_duplicate(connector->dev, &default_mode); if (!mode) { dev_err(ctx->dev, "failed to add mode %ux%u@%u\n", default_mode.hdisplay, default_mode.vdisplay, drm_mode_vrefresh(&default_mode)); return -ENOMEM; } drm_mode_set_name(mode); mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; connector->display_info.width_mm = mode->width_mm; connector->display_info.height_mm = mode->height_mm; drm_mode_probed_add(connector, mode); return 1; } static const struct drm_panel_funcs ltk500hd1829_funcs = { .unprepare = ltk500hd1829_unprepare, .prepare = ltk500hd1829_prepare, .get_modes = ltk500hd1829_get_modes, }; static int ltk500hd1829_probe(struct mipi_dsi_device *dsi) { struct ltk500hd1829 *ctx; struct device *dev = &dsi->dev; int ret; ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(ctx->reset_gpio)) { dev_err(dev, "cannot get reset gpio\n"); return PTR_ERR(ctx->reset_gpio); } ctx->vcc = devm_regulator_get(dev, "vcc"); if (IS_ERR(ctx->vcc)) { ret = PTR_ERR(ctx->vcc); if (ret != -EPROBE_DEFER) dev_err(dev, "Failed to request vcc regulator: %d\n", ret); return ret; } ctx->iovcc = devm_regulator_get(dev, "iovcc"); if (IS_ERR(ctx->iovcc)) { ret = PTR_ERR(ctx->iovcc); if (ret != -EPROBE_DEFER) dev_err(dev, "Failed to request iovcc regulator: %d\n", ret); return ret; } mipi_dsi_set_drvdata(dsi, ctx); ctx->dev = dev; dsi->lanes = 4; dsi->format = MIPI_DSI_FMT_RGB888; dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET; drm_panel_init(&ctx->panel, &dsi->dev, <k500hd1829_funcs, DRM_MODE_CONNECTOR_DSI); ret = drm_panel_of_backlight(&ctx->panel); if (ret) return ret; drm_panel_add(&ctx->panel); ret = mipi_dsi_attach(dsi); if (ret < 0) { dev_err(dev, "mipi_dsi_attach failed: %d\n", ret); drm_panel_remove(&ctx->panel); return ret; } return 0; } static void ltk500hd1829_shutdown(struct mipi_dsi_device *dsi) { struct ltk500hd1829 *ctx = mipi_dsi_get_drvdata(dsi); int ret; ret = drm_panel_unprepare(&ctx->panel); if (ret < 0) dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret); ret = drm_panel_disable(&ctx->panel); if (ret < 0) dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret); } static void ltk500hd1829_remove(struct mipi_dsi_device *dsi) { struct ltk500hd1829 *ctx = mipi_dsi_get_drvdata(dsi); int ret; ltk500hd1829_shutdown(dsi); ret = mipi_dsi_detach(dsi); if (ret < 0) dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret); drm_panel_remove(&ctx->panel); } static const struct of_device_id ltk500hd1829_of_match[] = { { .compatible = "leadtek,ltk500hd1829", }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, ltk500hd1829_of_match); static struct mipi_dsi_driver ltk500hd1829_driver = { .driver = { .name = "panel-leadtek-ltk500hd1829", .of_match_table = ltk500hd1829_of_match, }, .probe = ltk500hd1829_probe, .remove = ltk500hd1829_remove, .shutdown = ltk500hd1829_shutdown, }; module_mipi_dsi_driver(ltk500hd1829_driver); MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@theobroma-systems.com>"); MODULE_DESCRIPTION("Leadtek LTK500HD1829 panel driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1