Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Michael Srba | 1376 | 99.93% | 1 | 50.00% |
Uwe Kleine-König | 1 | 0.07% | 1 | 50.00% |
Total | 1377 | 2 |
// SPDX-License-Identifier: GPL-2.0-only // Copyright (C) 2019, Michael Srba #include <linux/delay.h> #include <linux/gpio/consumer.h> #include <linux/module.h> #include <linux/of.h> #include <linux/regulator/consumer.h> #include <video/mipi_display.h> #include <drm/drm_mipi_dsi.h> #include <drm/drm_modes.h> #include <drm/drm_panel.h> struct s6e88a0_ams452ef01 { struct drm_panel panel; struct mipi_dsi_device *dsi; struct regulator_bulk_data supplies[2]; struct gpio_desc *reset_gpio; bool prepared; }; static inline struct s6e88a0_ams452ef01 *to_s6e88a0_ams452ef01(struct drm_panel *panel) { return container_of(panel, struct s6e88a0_ams452ef01, panel); } #define dsi_dcs_write_seq(dsi, seq...) do { \ static const u8 d[] = { seq }; \ int ret; \ ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \ if (ret < 0) \ return ret; \ } while (0) static void s6e88a0_ams452ef01_reset(struct s6e88a0_ams452ef01 *ctx) { gpiod_set_value_cansleep(ctx->reset_gpio, 1); usleep_range(5000, 6000); gpiod_set_value_cansleep(ctx->reset_gpio, 0); usleep_range(1000, 2000); gpiod_set_value_cansleep(ctx->reset_gpio, 1); usleep_range(10000, 11000); } static int s6e88a0_ams452ef01_on(struct s6e88a0_ams452ef01 *ctx) { struct mipi_dsi_device *dsi = ctx->dsi; struct device *dev = &dsi->dev; int ret; dsi->mode_flags |= MIPI_DSI_MODE_LPM; dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a); // enable LEVEL2 commands dsi_dcs_write_seq(dsi, 0xcc, 0x4c); // set Pixel Clock Divider polarity ret = mipi_dsi_dcs_exit_sleep_mode(dsi); if (ret < 0) { dev_err(dev, "Failed to exit sleep mode: %d\n", ret); return ret; } msleep(120); // set default brightness/gama dsi_dcs_write_seq(dsi, 0xca, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, // V255 RR,GG,BB 0x80, 0x80, 0x80, // V203 R,G,B 0x80, 0x80, 0x80, // V151 R,G,B 0x80, 0x80, 0x80, // V87 R,G,B 0x80, 0x80, 0x80, // V51 R,G,B 0x80, 0x80, 0x80, // V35 R,G,B 0x80, 0x80, 0x80, // V23 R,G,B 0x80, 0x80, 0x80, // V11 R,G,B 0x6b, 0x68, 0x71, // V3 R,G,B 0x00, 0x00, 0x00); // V1 R,G,B // set default Amoled Off Ratio dsi_dcs_write_seq(dsi, 0xb2, 0x40, 0x0a, 0x17, 0x00, 0x0a); dsi_dcs_write_seq(dsi, 0xb6, 0x2c, 0x0b); // set default elvss voltage dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00); dsi_dcs_write_seq(dsi, 0xf7, 0x03); // gamma/aor update dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5); // disable LEVEL2 commands ret = mipi_dsi_dcs_set_display_on(dsi); if (ret < 0) { dev_err(dev, "Failed to set display on: %d\n", ret); return ret; } return 0; } static int s6e88a0_ams452ef01_off(struct s6e88a0_ams452ef01 *ctx) { struct mipi_dsi_device *dsi = ctx->dsi; struct device *dev = &dsi->dev; int ret; dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; ret = mipi_dsi_dcs_set_display_off(dsi); if (ret < 0) { dev_err(dev, "Failed to set display off: %d\n", ret); return ret; } msleep(35); ret = mipi_dsi_dcs_enter_sleep_mode(dsi); if (ret < 0) { dev_err(dev, "Failed to enter sleep mode: %d\n", ret); return ret; } msleep(120); return 0; } static int s6e88a0_ams452ef01_prepare(struct drm_panel *panel) { struct s6e88a0_ams452ef01 *ctx = to_s6e88a0_ams452ef01(panel); struct device *dev = &ctx->dsi->dev; int ret; if (ctx->prepared) return 0; ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); if (ret < 0) { dev_err(dev, "Failed to enable regulators: %d\n", ret); return ret; } s6e88a0_ams452ef01_reset(ctx); ret = s6e88a0_ams452ef01_on(ctx); if (ret < 0) { dev_err(dev, "Failed to initialize panel: %d\n", ret); gpiod_set_value_cansleep(ctx->reset_gpio, 0); regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); return ret; } ctx->prepared = true; return 0; } static int s6e88a0_ams452ef01_unprepare(struct drm_panel *panel) { struct s6e88a0_ams452ef01 *ctx = to_s6e88a0_ams452ef01(panel); struct device *dev = &ctx->dsi->dev; int ret; if (!ctx->prepared) return 0; ret = s6e88a0_ams452ef01_off(ctx); if (ret < 0) dev_err(dev, "Failed to un-initialize panel: %d\n", ret); gpiod_set_value_cansleep(ctx->reset_gpio, 0); regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); ctx->prepared = false; return 0; } static const struct drm_display_mode s6e88a0_ams452ef01_mode = { .clock = (540 + 88 + 4 + 20) * (960 + 14 + 2 + 8) * 60 / 1000, .hdisplay = 540, .hsync_start = 540 + 88, .hsync_end = 540 + 88 + 4, .htotal = 540 + 88 + 4 + 20, .vdisplay = 960, .vsync_start = 960 + 14, .vsync_end = 960 + 14 + 2, .vtotal = 960 + 14 + 2 + 8, .width_mm = 56, .height_mm = 100, }; static int s6e88a0_ams452ef01_get_modes(struct drm_panel *panel, struct drm_connector *connector) { struct drm_display_mode *mode; mode = drm_mode_duplicate(connector->dev, &s6e88a0_ams452ef01_mode); if (!mode) return -ENOMEM; drm_mode_set_name(mode); mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; connector->display_info.width_mm = mode->width_mm; connector->display_info.height_mm = mode->height_mm; drm_mode_probed_add(connector, mode); return 1; } static const struct drm_panel_funcs s6e88a0_ams452ef01_panel_funcs = { .unprepare = s6e88a0_ams452ef01_unprepare, .prepare = s6e88a0_ams452ef01_prepare, .get_modes = s6e88a0_ams452ef01_get_modes, }; static int s6e88a0_ams452ef01_probe(struct mipi_dsi_device *dsi) { struct device *dev = &dsi->dev; struct s6e88a0_ams452ef01 *ctx; int ret; ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; ctx->supplies[0].supply = "vdd3"; ctx->supplies[1].supply = "vci"; ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), ctx->supplies); if (ret < 0) { dev_err(dev, "Failed to get regulators: %d\n", ret); return ret; } ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(ctx->reset_gpio)) { ret = PTR_ERR(ctx->reset_gpio); dev_err(dev, "Failed to get reset-gpios: %d\n", ret); return ret; } ctx->dsi = dsi; mipi_dsi_set_drvdata(dsi, ctx); dsi->lanes = 2; dsi->format = MIPI_DSI_FMT_RGB888; dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST; drm_panel_init(&ctx->panel, dev, &s6e88a0_ams452ef01_panel_funcs, DRM_MODE_CONNECTOR_DSI); drm_panel_add(&ctx->panel); ret = mipi_dsi_attach(dsi); if (ret < 0) { dev_err(dev, "Failed to attach to DSI host: %d\n", ret); drm_panel_remove(&ctx->panel); return ret; } return 0; } static void s6e88a0_ams452ef01_remove(struct mipi_dsi_device *dsi) { struct s6e88a0_ams452ef01 *ctx = mipi_dsi_get_drvdata(dsi); int ret; ret = mipi_dsi_detach(dsi); if (ret < 0) dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret); drm_panel_remove(&ctx->panel); } static const struct of_device_id s6e88a0_ams452ef01_of_match[] = { { .compatible = "samsung,s6e88a0-ams452ef01" }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, s6e88a0_ams452ef01_of_match); static struct mipi_dsi_driver s6e88a0_ams452ef01_driver = { .probe = s6e88a0_ams452ef01_probe, .remove = s6e88a0_ams452ef01_remove, .driver = { .name = "panel-s6e88a0-ams452ef01", .of_match_table = s6e88a0_ams452ef01_of_match, }, }; module_mipi_dsi_driver(s6e88a0_ams452ef01_driver); MODULE_AUTHOR("Michael Srba <Michael.Srba@seznam.cz>"); MODULE_DESCRIPTION("MIPI-DSI based Panel Driver for AMS452EF01 AMOLED LCD with a S6E88A0 controller"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1