| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Nestor Lopez Casado | 3455 | 40.56% | 4 | 4.17% |
| Hans de Goede | 3129 | 36.73% | 25 | 26.04% |
| Benjamin Tissoires | 1352 | 15.87% | 22 | 22.92% |
| Henrik Rydberg | 116 | 1.36% | 1 | 1.04% |
| Filipe Laíns | 93 | 1.09% | 8 | 8.33% |
| Peter Wu | 66 | 0.77% | 1 | 1.04% |
| Marc Dionne | 63 | 0.74% | 1 | 1.04% |
| Linus Torvalds (pre-git) | 57 | 0.67% | 6 | 6.25% |
| Jiri Slaby | 53 | 0.62% | 3 | 3.12% |
| Linus Torvalds | 38 | 0.45% | 1 | 1.04% |
| Jiri Kosina | 36 | 0.42% | 6 | 6.25% |
| Oliver Neukum | 13 | 0.15% | 2 | 2.08% |
| Anssi Hannula | 12 | 0.14% | 1 | 1.04% |
| Andrew de los Reyes | 6 | 0.07% | 1 | 1.04% |
| Kees Cook | 4 | 0.05% | 1 | 1.04% |
| Olivier Gay | 4 | 0.05% | 1 | 1.04% |
| Jonathan Nieder | 4 | 0.05% | 1 | 1.04% |
| Lucas Zampieri | 3 | 0.04% | 1 | 1.04% |
| Mazin Rezk | 3 | 0.04% | 1 | 1.04% |
| Colin Ian King | 2 | 0.02% | 2 | 2.08% |
| Gustavo A. R. Silva | 2 | 0.02% | 1 | 1.04% |
| Alan Cox | 2 | 0.02% | 1 | 1.04% |
| Vojtech Pavlik | 1 | 0.01% | 1 | 1.04% |
| Thomas Gleixner | 1 | 0.01% | 1 | 1.04% |
| Chris Packham | 1 | 0.01% | 1 | 1.04% |
| Greg Kroah-Hartman | 1 | 0.01% | 1 | 1.04% |
| Yue haibing | 1 | 0.01% | 1 | 1.04% |
| Total | 8518 | 96 |
// SPDX-License-Identifier: GPL-2.0-only /* * HID driver for Logitech receivers * * Copyright (c) 2011 Logitech */ #include <linux/device.h> #include <linux/hid.h> #include <linux/module.h> #include <linux/kfifo.h> #include <linux/delay.h> #include <linux/usb.h> /* For to_usb_interface for kvm extra intf check */ #include <asm/unaligned.h> #include "hid-ids.h" #define DJ_MAX_PAIRED_DEVICES 7 #define DJ_MAX_NUMBER_NOTIFS 8 #define DJ_RECEIVER_INDEX 0 #define DJ_DEVICE_INDEX_MIN 1 #define DJ_DEVICE_INDEX_MAX 7 #define DJREPORT_SHORT_LENGTH 15 #define DJREPORT_LONG_LENGTH 32 #define REPORT_ID_DJ_SHORT 0x20 #define REPORT_ID_DJ_LONG 0x21 #define REPORT_ID_HIDPP_SHORT 0x10 #define REPORT_ID_HIDPP_LONG 0x11 #define REPORT_ID_HIDPP_VERY_LONG 0x12 #define HIDPP_REPORT_SHORT_LENGTH 7 #define HIDPP_REPORT_LONG_LENGTH 20 #define HIDPP_RECEIVER_INDEX 0xff #define REPORT_TYPE_RFREPORT_FIRST 0x01 #define REPORT_TYPE_RFREPORT_LAST 0x1F /* Command Switch to DJ mode */ #define REPORT_TYPE_CMD_SWITCH 0x80 #define CMD_SWITCH_PARAM_DEVBITFIELD 0x00 #define CMD_SWITCH_PARAM_TIMEOUT_SECONDS 0x01 #define TIMEOUT_NO_KEEPALIVE 0x00 /* Command to Get the list of Paired devices */ #define REPORT_TYPE_CMD_GET_PAIRED_DEVICES 0x81 /* Device Paired Notification */ #define REPORT_TYPE_NOTIF_DEVICE_PAIRED 0x41 #define SPFUNCTION_MORE_NOTIF_EXPECTED 0x01 #define SPFUNCTION_DEVICE_LIST_EMPTY 0x02 #define DEVICE_PAIRED_PARAM_SPFUNCTION 0x00 #define DEVICE_PAIRED_PARAM_EQUAD_ID_LSB 0x01 #define DEVICE_PAIRED_PARAM_EQUAD_ID_MSB 0x02 #define DEVICE_PAIRED_RF_REPORT_TYPE 0x03 /* Device Un-Paired Notification */ #define REPORT_TYPE_NOTIF_DEVICE_UNPAIRED 0x40 /* Connection Status Notification */ #define REPORT_TYPE_NOTIF_CONNECTION_STATUS 0x42 #define CONNECTION_STATUS_PARAM_STATUS 0x00 #define STATUS_LINKLOSS 0x01 /* Error Notification */ #define REPORT_TYPE_NOTIF_ERROR 0x7F #define NOTIF_ERROR_PARAM_ETYPE 0x00 #define ETYPE_KEEPALIVE_TIMEOUT 0x01 /* supported DJ HID && RF report types */ #define REPORT_TYPE_KEYBOARD 0x01 #define REPORT_TYPE_MOUSE 0x02 #define REPORT_TYPE_CONSUMER_CONTROL 0x03 #define REPORT_TYPE_SYSTEM_CONTROL 0x04 #define REPORT_TYPE_MEDIA_CENTER 0x08 #define REPORT_TYPE_LEDS 0x0E /* RF Report types bitfield */ #define STD_KEYBOARD BIT(1) #define STD_MOUSE BIT(2) #define MULTIMEDIA BIT(3) #define POWER_KEYS BIT(4) #define KBD_MOUSE BIT(5) #define MEDIA_CENTER BIT(8) #define KBD_LEDS BIT(14) /* Fake (bitnr > NUMBER_OF_HID_REPORTS) bit to track HID++ capability */ #define HIDPP BIT_ULL(63) /* HID++ Device Connected Notification */ #define REPORT_TYPE_NOTIF_DEVICE_CONNECTED 0x41 #define HIDPP_PARAM_PROTO_TYPE 0x00 #define HIDPP_PARAM_DEVICE_INFO 0x01 #define HIDPP_PARAM_EQUAD_LSB 0x02 #define HIDPP_PARAM_EQUAD_MSB 0x03 #define HIDPP_PARAM_27MHZ_DEVID 0x03 #define HIDPP_DEVICE_TYPE_MASK GENMASK(3, 0) #define HIDPP_LINK_STATUS_MASK BIT(6) #define HIDPP_MANUFACTURER_MASK BIT(7) #define HIDPP_27MHZ_SECURE_MASK BIT(7) #define HIDPP_DEVICE_TYPE_KEYBOARD 1 #define HIDPP_DEVICE_TYPE_MOUSE 2 #define HIDPP_SET_REGISTER 0x80 #define HIDPP_GET_LONG_REGISTER 0x83 #define HIDPP_REG_CONNECTION_STATE 0x02 #define HIDPP_REG_PAIRING_INFORMATION 0xB5 #define HIDPP_PAIRING_INFORMATION 0x20 #define HIDPP_FAKE_DEVICE_ARRIVAL 0x02 enum recvr_type { recvr_type_dj, recvr_type_hidpp, recvr_type_gaming_hidpp, recvr_type_mouse_only, recvr_type_27mhz, recvr_type_bluetooth, recvr_type_dinovo, }; struct dj_report { u8 report_id; u8 device_index; u8 report_type; u8 report_params[DJREPORT_SHORT_LENGTH - 3]; }; struct hidpp_event { u8 report_id; u8 device_index; u8 sub_id; u8 params[HIDPP_REPORT_LONG_LENGTH - 3U]; } __packed; struct dj_receiver_dev { struct hid_device *mouse; struct hid_device *keyboard; struct hid_device *hidpp; struct dj_device *paired_dj_devices[DJ_MAX_PAIRED_DEVICES + DJ_DEVICE_INDEX_MIN]; struct list_head list; struct kref kref; struct work_struct work; struct kfifo notif_fifo; unsigned long last_query; /* in jiffies */ bool ready; enum recvr_type type; unsigned int unnumbered_application; spinlock_t lock; }; struct dj_device { struct hid_device *hdev; struct dj_receiver_dev *dj_receiver_dev; u64 reports_supported; u8 device_index; }; #define WORKITEM_TYPE_EMPTY 0 #define WORKITEM_TYPE_PAIRED 1 #define WORKITEM_TYPE_UNPAIRED 2 #define WORKITEM_TYPE_UNKNOWN 255 struct dj_workitem { u8 type; /* WORKITEM_TYPE_* */ u8 device_index; u8 device_type; u8 quad_id_msb; u8 quad_id_lsb; u64 reports_supported; }; /* Keyboard descriptor (1) */ static const char kbd_descriptor[] = { 0x05, 0x01, /* USAGE_PAGE (generic Desktop) */ 0x09, 0x06, /* USAGE (Keyboard) */ 0xA1, 0x01, /* COLLECTION (Application) */ 0x85, 0x01, /* REPORT_ID (1) */ 0x95, 0x08, /* REPORT_COUNT (8) */ 0x75, 0x01, /* REPORT_SIZE (1) */ 0x15, 0x00, /* LOGICAL_MINIMUM (0) */ 0x25, 0x01, /* LOGICAL_MAXIMUM (1) */ 0x05, 0x07, /* USAGE_PAGE (Keyboard) */ 0x19, 0xE0, /* USAGE_MINIMUM (Left Control) */ 0x29, 0xE7, /* USAGE_MAXIMUM (Right GUI) */ 0x81, 0x02, /* INPUT (Data,Var,Abs) */ 0x95, 0x06, /* REPORT_COUNT (6) */ 0x75, 0x08, /* REPORT_SIZE (8) */ 0x15, 0x00, /* LOGICAL_MINIMUM (0) */ 0x26, 0xFF, 0x00, /* LOGICAL_MAXIMUM (255) */ 0x05, 0x07, /* USAGE_PAGE (Keyboard) */ 0x19, 0x00, /* USAGE_MINIMUM (no event) */ 0x2A, 0xFF, 0x00, /* USAGE_MAXIMUM (reserved) */ 0x81, 0x00, /* INPUT (Data,Ary,Abs) */ 0x85, 0x0e, /* REPORT_ID (14) */ 0x05, 0x08, /* USAGE PAGE (LED page) */ 0x95, 0x05, /* REPORT COUNT (5) */ 0x75, 0x01, /* REPORT SIZE (1) */ 0x15, 0x00, /* LOGICAL_MINIMUM (0) */ 0x25, 0x01, /* LOGICAL_MAXIMUM (1) */ 0x19, 0x01, /* USAGE MINIMUM (1) */ 0x29, 0x05, /* USAGE MAXIMUM (5) */ 0x91, 0x02, /* OUTPUT (Data, Variable, Absolute) */ 0x95, 0x01, /* REPORT COUNT (1) */ 0x75, 0x03, /* REPORT SIZE (3) */ 0x91, 0x01, /* OUTPUT (Constant) */ 0xC0 }; /* Mouse descriptor (2) */ static const char mse_descriptor[] = { 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */ 0x09, 0x02, /* USAGE (Mouse) */ 0xA1, 0x01, /* COLLECTION (Application) */ 0x85, 0x02, /* REPORT_ID = 2 */ 0x09, 0x01, /* USAGE (pointer) */ 0xA1, 0x00, /* COLLECTION (physical) */ 0x05, 0x09, /* USAGE_PAGE (buttons) */ 0x19, 0x01, /* USAGE_MIN (1) */ 0x29, 0x10, /* USAGE_MAX (16) */ 0x15, 0x00, /* LOGICAL_MIN (0) */ 0x25, 0x01, /* LOGICAL_MAX (1) */ 0x95, 0x10, /* REPORT_COUNT (16) */ 0x75, 0x01, /* REPORT_SIZE (1) */ 0x81, 0x02, /* INPUT (data var abs) */ 0x05, 0x01, /* USAGE_PAGE (generic desktop) */ 0x16, 0x01, 0xF8, /* LOGICAL_MIN (-2047) */ 0x26, 0xFF, 0x07, /* LOGICAL_MAX (2047) */ 0x75, 0x0C, /* REPORT_SIZE (12) */ 0x95, 0x02, /* REPORT_COUNT (2) */ 0x09, 0x30, /* USAGE (X) */ 0x09, 0x31, /* USAGE (Y) */ 0x81, 0x06, /* INPUT */ 0x15, 0x81, /* LOGICAL_MIN (-127) */ 0x25, 0x7F, /* LOGICAL_MAX (127) */ 0x75, 0x08, /* REPORT_SIZE (8) */ 0x95, 0x01, /* REPORT_COUNT (1) */ 0x09, 0x38, /* USAGE (wheel) */ 0x81, 0x06, /* INPUT */ 0x05, 0x0C, /* USAGE_PAGE(consumer) */ 0x0A, 0x38, 0x02, /* USAGE(AC Pan) */ 0x95, 0x01, /* REPORT_COUNT (1) */ 0x81, 0x06, /* INPUT */ 0xC0, /* END_COLLECTION */ 0xC0, /* END_COLLECTION */ }; /* Mouse descriptor (2) for 27 MHz receiver, only 8 buttons */ static const char mse_27mhz_descriptor[] = { 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */ 0x09, 0x02, /* USAGE (Mouse) */ 0xA1, 0x01, /* COLLECTION (Application) */ 0x85, 0x02, /* REPORT_ID = 2 */ 0x09, 0x01, /* USAGE (pointer) */ 0xA1, 0x00, /* COLLECTION (physical) */ 0x05, 0x09, /* USAGE_PAGE (buttons) */ 0x19, 0x01, /* USAGE_MIN (1) */ 0x29, 0x08, /* USAGE_MAX (8) */ 0x15, 0x00, /* LOGICAL_MIN (0) */ 0x25, 0x01, /* LOGICAL_MAX (1) */ 0x95, 0x08, /* REPORT_COUNT (8) */ 0x75, 0x01, /* REPORT_SIZE (1) */ 0x81, 0x02, /* INPUT (data var abs) */ 0x05, 0x01, /* USAGE_PAGE (generic desktop) */ 0x16, 0x01, 0xF8, /* LOGICAL_MIN (-2047) */ 0x26, 0xFF, 0x07, /* LOGICAL_MAX (2047) */ 0x75, 0x0C, /* REPORT_SIZE (12) */ 0x95, 0x02, /* REPORT_COUNT (2) */ 0x09, 0x30, /* USAGE (X) */ 0x09, 0x31, /* USAGE (Y) */ 0x81, 0x06, /* INPUT */ 0x15, 0x81, /* LOGICAL_MIN (-127) */ 0x25, 0x7F, /* LOGICAL_MAX (127) */ 0x75, 0x08, /* REPORT_SIZE (8) */ 0x95, 0x01, /* REPORT_COUNT (1) */ 0x09, 0x38, /* USAGE (wheel) */ 0x81, 0x06, /* INPUT */ 0x05, 0x0C, /* USAGE_PAGE(consumer) */ 0x0A, 0x38, 0x02, /* USAGE(AC Pan) */ 0x95, 0x01, /* REPORT_COUNT (1) */ 0x81, 0x06, /* INPUT */ 0xC0, /* END_COLLECTION */ 0xC0, /* END_COLLECTION */ }; /* Mouse descriptor (2) for Bluetooth receiver, low-res hwheel, 12 buttons */ static const char mse_bluetooth_descriptor[] = { 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */ 0x09, 0x02, /* USAGE (Mouse) */ 0xA1, 0x01, /* COLLECTION (Application) */ 0x85, 0x02, /* REPORT_ID = 2 */ 0x09, 0x01, /* USAGE (pointer) */ 0xA1, 0x00, /* COLLECTION (physical) */ 0x05, 0x09, /* USAGE_PAGE (buttons) */ 0x19, 0x01, /* USAGE_MIN (1) */ 0x29, 0x08, /* USAGE_MAX (8) */ 0x15, 0x00, /* LOGICAL_MIN (0) */ 0x25, 0x01, /* LOGICAL_MAX (1) */ 0x95, 0x08, /* REPORT_COUNT (8) */ 0x75, 0x01, /* REPORT_SIZE (1) */ 0x81, 0x02, /* INPUT (data var abs) */ 0x05, 0x01, /* USAGE_PAGE (generic desktop) */ 0x16, 0x01, 0xF8, /* LOGICAL_MIN (-2047) */ 0x26, 0xFF, 0x07, /* LOGICAL_MAX (2047) */ 0x75, 0x0C, /* REPORT_SIZE (12) */ 0x95, 0x02, /* REPORT_COUNT (2) */ 0x09, 0x30, /* USAGE (X) */ 0x09, 0x31, /* USAGE (Y) */ 0x81, 0x06, /* INPUT */ 0x15, 0x81, /* LOGICAL_MIN (-127) */ 0x25, 0x7F, /* LOGICAL_MAX (127) */ 0x75, 0x08, /* REPORT_SIZE (8) */ 0x95, 0x01, /* REPORT_COUNT (1) */ 0x09, 0x38, /* USAGE (wheel) */ 0x81, 0x06, /* INPUT */ 0x05, 0x0C, /* USAGE_PAGE(consumer) */ 0x0A, 0x38, 0x02, /* USAGE(AC Pan) */ 0x15, 0xF9, /* LOGICAL_MIN (-7) */ 0x25, 0x07, /* LOGICAL_MAX (7) */ 0x75, 0x04, /* REPORT_SIZE (4) */ 0x95, 0x01, /* REPORT_COUNT (1) */ 0x81, 0x06, /* INPUT */ 0x05, 0x09, /* USAGE_PAGE (buttons) */ 0x19, 0x09, /* USAGE_MIN (9) */ 0x29, 0x0C, /* USAGE_MAX (12) */ 0x15, 0x00, /* LOGICAL_MIN (0) */ 0x25, 0x01, /* LOGICAL_MAX (1) */ 0x75, 0x01, /* REPORT_SIZE (1) */ 0x95, 0x04, /* REPORT_COUNT (4) */ 0x81, 0x02, /* INPUT (Data,Var,Abs) */ 0xC0, /* END_COLLECTION */ 0xC0, /* END_COLLECTION */ }; /* Mouse descriptor (5) for Bluetooth receiver, normal-res hwheel, 8 buttons */ static const char mse5_bluetooth_descriptor[] = { 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */ 0x09, 0x02, /* Usage (Mouse) */ 0xa1, 0x01, /* Collection (Application) */ 0x85, 0x05, /* Report ID (5) */ 0x09, 0x01, /* Usage (Pointer) */ 0xa1, 0x00, /* Collection (Physical) */ 0x05, 0x09, /* Usage Page (Button) */ 0x19, 0x01, /* Usage Minimum (1) */ 0x29, 0x08, /* Usage Maximum (8) */ 0x15, 0x00, /* Logical Minimum (0) */ 0x25, 0x01, /* Logical Maximum (1) */ 0x95, 0x08, /* Report Count (8) */ 0x75, 0x01, /* Report Size (1) */ 0x81, 0x02, /* Input (Data,Var,Abs) */ 0x05, 0x01, /* Usage Page (Generic Desktop) */ 0x16, 0x01, 0xf8, /* Logical Minimum (-2047) */ 0x26, 0xff, 0x07, /* Logical Maximum (2047) */ 0x75, 0x0c, /* Report Size (12) */ 0x95, 0x02, /* Report Count (2) */ 0x09, 0x30, /* Usage (X) */ 0x09, 0x31, /* Usage (Y) */ 0x81, 0x06, /* Input (Data,Var,Rel) */ 0x15, 0x81, /* Logical Minimum (-127) */ 0x25, 0x7f, /* Logical Maximum (127) */ 0x75, 0x08, /* Report Size (8) */ 0x95, 0x01, /* Report Count (1) */ 0x09, 0x38, /* Usage (Wheel) */ 0x81, 0x06, /* Input (Data,Var,Rel) */ 0x05, 0x0c, /* Usage Page (Consumer Devices) */ 0x0a, 0x38, 0x02, /* Usage (AC Pan) */ 0x15, 0x81, /* Logical Minimum (-127) */ 0x25, 0x7f, /* Logical Maximum (127) */ 0x75, 0x08, /* Report Size (8) */ 0x95, 0x01, /* Report Count (1) */ 0x81, 0x06, /* Input (Data,Var,Rel) */ 0xc0, /* End Collection */ 0xc0, /* End Collection */ }; /* Gaming Mouse descriptor (2) */ static const char mse_high_res_descriptor[] = { 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */ 0x09, 0x02, /* USAGE (Mouse) */ 0xA1, 0x01, /* COLLECTION (Application) */ 0x85, 0x02, /* REPORT_ID = 2 */ 0x09, 0x01, /* USAGE (pointer) */ 0xA1, 0x00, /* COLLECTION (physical) */ 0x05, 0x09, /* USAGE_PAGE (buttons) */ 0x19, 0x01, /* USAGE_MIN (1) */ 0x29, 0x10, /* USAGE_MAX (16) */ 0x15, 0x00, /* LOGICAL_MIN (0) */ 0x25, 0x01, /* LOGICAL_MAX (1) */ 0x95, 0x10, /* REPORT_COUNT (16) */ 0x75, 0x01, /* REPORT_SIZE (1) */ 0x81, 0x02, /* INPUT (data var abs) */ 0x05, 0x01, /* USAGE_PAGE (generic desktop) */ 0x16, 0x01, 0x80, /* LOGICAL_MIN (-32767) */ 0x26, 0xFF, 0x7F, /* LOGICAL_MAX (32767) */ 0x75, 0x10, /* REPORT_SIZE (16) */ 0x95, 0x02, /* REPORT_COUNT (2) */ 0x09, 0x30, /* USAGE (X) */ 0x09, 0x31, /* USAGE (Y) */ 0x81, 0x06, /* INPUT */ 0x15, 0x81, /* LOGICAL_MIN (-127) */ 0x25, 0x7F, /* LOGICAL_MAX (127) */ 0x75, 0x08, /* REPORT_SIZE (8) */ 0x95, 0x01, /* REPORT_COUNT (1) */ 0x09, 0x38, /* USAGE (wheel) */ 0x81, 0x06, /* INPUT */ 0x05, 0x0C, /* USAGE_PAGE(consumer) */ 0x0A, 0x38, 0x02, /* USAGE(AC Pan) */ 0x95, 0x01, /* REPORT_COUNT (1) */ 0x81, 0x06, /* INPUT */ 0xC0, /* END_COLLECTION */ 0xC0, /* END_COLLECTION */ }; /* Consumer Control descriptor (3) */ static const char consumer_descriptor[] = { 0x05, 0x0C, /* USAGE_PAGE (Consumer Devices) */ 0x09, 0x01, /* USAGE (Consumer Control) */ 0xA1, 0x01, /* COLLECTION (Application) */ 0x85, 0x03, /* REPORT_ID = 3 */ 0x75, 0x10, /* REPORT_SIZE (16) */ 0x95, 0x02, /* REPORT_COUNT (2) */ 0x15, 0x01, /* LOGICAL_MIN (1) */ 0x26, 0xFF, 0x02, /* LOGICAL_MAX (767) */ 0x19, 0x01, /* USAGE_MIN (1) */ 0x2A, 0xFF, 0x02, /* USAGE_MAX (767) */ 0x81, 0x00, /* INPUT (Data Ary Abs) */ 0xC0, /* END_COLLECTION */ }; /* */ /* System control descriptor (4) */ static const char syscontrol_descriptor[] = { 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */ 0x09, 0x80, /* USAGE (System Control) */ 0xA1, 0x01, /* COLLECTION (Application) */ 0x85, 0x04, /* REPORT_ID = 4 */ 0x75, 0x02, /* REPORT_SIZE (2) */ 0x95, 0x01, /* REPORT_COUNT (1) */ 0x15, 0x01, /* LOGICAL_MIN (1) */ 0x25, 0x03, /* LOGICAL_MAX (3) */ 0x09, 0x82, /* USAGE (System Sleep) */ 0x09, 0x81, /* USAGE (System Power Down) */ 0x09, 0x83, /* USAGE (System Wake Up) */ 0x81, 0x60, /* INPUT (Data Ary Abs NPrf Null) */ 0x75, 0x06, /* REPORT_SIZE (6) */ 0x81, 0x03, /* INPUT (Cnst Var Abs) */ 0xC0, /* END_COLLECTION */ }; /* Media descriptor (8) */ static const char media_descriptor[] = { 0x06, 0xbc, 0xff, /* Usage Page 0xffbc */ 0x09, 0x88, /* Usage 0x0088 */ 0xa1, 0x01, /* BeginCollection */ 0x85, 0x08, /* Report ID 8 */ 0x19, 0x01, /* Usage Min 0x0001 */ 0x29, 0xff, /* Usage Max 0x00ff */ 0x15, 0x01, /* Logical Min 1 */ 0x26, 0xff, 0x00, /* Logical Max 255 */ 0x75, 0x08, /* Report Size 8 */ 0x95, 0x01, /* Report Count 1 */ 0x81, 0x00, /* Input */ 0xc0, /* EndCollection */ }; /* */ /* HIDPP descriptor */ static const char hidpp_descriptor[] = { 0x06, 0x00, 0xff, /* Usage Page (Vendor Defined Page 1) */ 0x09, 0x01, /* Usage (Vendor Usage 1) */ 0xa1, 0x01, /* Collection (Application) */ 0x85, 0x10, /* Report ID (16) */ 0x75, 0x08, /* Report Size (8) */ 0x95, 0x06, /* Report Count (6) */ 0x15, 0x00, /* Logical Minimum (0) */ 0x26, 0xff, 0x00, /* Logical Maximum (255) */ 0x09, 0x01, /* Usage (Vendor Usage 1) */ 0x81, 0x00, /* Input (Data,Arr,Abs) */ 0x09, 0x01, /* Usage (Vendor Usage 1) */ 0x91, 0x00, /* Output (Data,Arr,Abs) */ 0xc0, /* End Collection */ 0x06, 0x00, 0xff, /* Usage Page (Vendor Defined Page 1) */ 0x09, 0x02, /* Usage (Vendor Usage 2) */ 0xa1, 0x01, /* Collection (Application) */ 0x85, 0x11, /* Report ID (17) */ 0x75, 0x08, /* Report Size (8) */ 0x95, 0x13, /* Report Count (19) */ 0x15, 0x00, /* Logical Minimum (0) */ 0x26, 0xff, 0x00, /* Logical Maximum (255) */ 0x09, 0x02, /* Usage (Vendor Usage 2) */ 0x81, 0x00, /* Input (Data,Arr,Abs) */ 0x09, 0x02, /* Usage (Vendor Usage 2) */ 0x91, 0x00, /* Output (Data,Arr,Abs) */ 0xc0, /* End Collection */ 0x06, 0x00, 0xff, /* Usage Page (Vendor Defined Page 1) */ 0x09, 0x04, /* Usage (Vendor Usage 0x04) */ 0xa1, 0x01, /* Collection (Application) */ 0x85, 0x20, /* Report ID (32) */ 0x75, 0x08, /* Report Size (8) */ 0x95, 0x0e, /* Report Count (14) */ 0x15, 0x00, /* Logical Minimum (0) */ 0x26, 0xff, 0x00, /* Logical Maximum (255) */ 0x09, 0x41, /* Usage (Vendor Usage 0x41) */ 0x81, 0x00, /* Input (Data,Arr,Abs) */ 0x09, 0x41, /* Usage (Vendor Usage 0x41) */ 0x91, 0x00, /* Output (Data,Arr,Abs) */ 0x85, 0x21, /* Report ID (33) */ 0x95, 0x1f, /* Report Count (31) */ 0x15, 0x00, /* Logical Minimum (0) */ 0x26, 0xff, 0x00, /* Logical Maximum (255) */ 0x09, 0x42, /* Usage (Vendor Usage 0x42) */ 0x81, 0x00, /* Input (Data,Arr,Abs) */ 0x09, 0x42, /* Usage (Vendor Usage 0x42) */ 0x91, 0x00, /* Output (Data,Arr,Abs) */ 0xc0, /* End Collection */ }; /* Maximum size of all defined hid reports in bytes (including report id) */ #define MAX_REPORT_SIZE 8 /* Make sure all descriptors are present here */ #define MAX_RDESC_SIZE \ (sizeof(kbd_descriptor) + \ sizeof(mse_bluetooth_descriptor) + \ sizeof(mse5_bluetooth_descriptor) + \ sizeof(consumer_descriptor) + \ sizeof(syscontrol_descriptor) + \ sizeof(media_descriptor) + \ sizeof(hidpp_descriptor)) /* Number of possible hid report types that can be created by this driver. * * Right now, RF report types have the same report types (or report id's) * than the hid report created from those RF reports. In the future * this doesnt have to be true. * * For instance, RF report type 0x01 which has a size of 8 bytes, corresponds * to hid report id 0x01, this is standard keyboard. Same thing applies to mice * reports and consumer control, etc. If a new RF report is created, it doesn't * has to have the same report id as its corresponding hid report, so an * translation may have to take place for future report types. */ #define NUMBER_OF_HID_REPORTS 32 static const u8 hid_reportid_size_map[NUMBER_OF_HID_REPORTS] = { [1] = 8, /* Standard keyboard */ [2] = 8, /* Standard mouse */ [3] = 5, /* Consumer control */ [4] = 2, /* System control */ [8] = 2, /* Media Center */ }; #define LOGITECH_DJ_INTERFACE_NUMBER 0x02 static struct hid_ll_driver logi_dj_ll_driver; static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev); static void delayedwork_callback(struct work_struct *work); static LIST_HEAD(dj_hdev_list); static DEFINE_MUTEX(dj_hdev_list_lock); static bool recvr_type_is_bluetooth(enum recvr_type type) { return type == recvr_type_bluetooth || type == recvr_type_dinovo; } /* * dj/HID++ receivers are really a single logical entity, but for BIOS/Windows * compatibility they have multiple USB interfaces. On HID++ receivers we need * to listen for input reports on both interfaces. The functions below are used * to create a single struct dj_receiver_dev for all interfaces belonging to * a single USB-device / receiver. */ static struct dj_receiver_dev *dj_find_receiver_dev(struct hid_device *hdev, enum recvr_type type) { struct dj_receiver_dev *djrcv_dev; char sep; /* * The bluetooth receiver contains a built-in hub and has separate * USB-devices for the keyboard and mouse interfaces. */ sep = recvr_type_is_bluetooth(type) ? '.' : '/'; /* Try to find an already-probed interface from the same device */ list_for_each_entry(djrcv_dev, &dj_hdev_list, list) { if (djrcv_dev->mouse && hid_compare_device_paths(hdev, djrcv_dev->mouse, sep)) { kref_get(&djrcv_dev->kref); return djrcv_dev; } if (djrcv_dev->keyboard && hid_compare_device_paths(hdev, djrcv_dev->keyboard, sep)) { kref_get(&djrcv_dev->kref); return djrcv_dev; } if (djrcv_dev->hidpp && hid_compare_device_paths(hdev, djrcv_dev->hidpp, sep)) { kref_get(&djrcv_dev->kref); return djrcv_dev; } } return NULL; } static void dj_release_receiver_dev(struct kref *kref) { struct dj_receiver_dev *djrcv_dev = container_of(kref, struct dj_receiver_dev, kref); list_del(&djrcv_dev->list); kfifo_free(&djrcv_dev->notif_fifo); kfree(djrcv_dev); } static void dj_put_receiver_dev(struct hid_device *hdev) { struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev); mutex_lock(&dj_hdev_list_lock); if (djrcv_dev->mouse == hdev) djrcv_dev->mouse = NULL; if (djrcv_dev->keyboard == hdev) djrcv_dev->keyboard = NULL; if (djrcv_dev->hidpp == hdev) djrcv_dev->hidpp = NULL; kref_put(&djrcv_dev->kref, dj_release_receiver_dev); mutex_unlock(&dj_hdev_list_lock); } static struct dj_receiver_dev *dj_get_receiver_dev(struct hid_device *hdev, enum recvr_type type, unsigned int application, bool is_hidpp) { struct dj_receiver_dev *djrcv_dev; mutex_lock(&dj_hdev_list_lock); djrcv_dev = dj_find_receiver_dev(hdev, type); if (!djrcv_dev) { djrcv_dev = kzalloc(sizeof(*djrcv_dev), GFP_KERNEL); if (!djrcv_dev) goto out; INIT_WORK(&djrcv_dev->work, delayedwork_callback); spin_lock_init(&djrcv_dev->lock); if (kfifo_alloc(&djrcv_dev->notif_fifo, DJ_MAX_NUMBER_NOTIFS * sizeof(struct dj_workitem), GFP_KERNEL)) { kfree(djrcv_dev); djrcv_dev = NULL; goto out; } kref_init(&djrcv_dev->kref); list_add_tail(&djrcv_dev->list, &dj_hdev_list); djrcv_dev->last_query = jiffies; djrcv_dev->type = type; } if (application == HID_GD_KEYBOARD) djrcv_dev->keyboard = hdev; if (application == HID_GD_MOUSE) djrcv_dev->mouse = hdev; if (is_hidpp) djrcv_dev->hidpp = hdev; hid_set_drvdata(hdev, djrcv_dev); out: mutex_unlock(&dj_hdev_list_lock); return djrcv_dev; } static void logi_dj_recv_destroy_djhid_device(struct dj_receiver_dev *djrcv_dev, struct dj_workitem *workitem) { /* Called in delayed work context */ struct dj_device *dj_dev; unsigned long flags; spin_lock_irqsave(&djrcv_dev->lock, flags); dj_dev = djrcv_dev->paired_dj_devices[workitem->device_index]; djrcv_dev->paired_dj_devices[workitem->device_index] = NULL; spin_unlock_irqrestore(&djrcv_dev->lock, flags); if (dj_dev != NULL) { hid_destroy_device(dj_dev->hdev); kfree(dj_dev); } else { hid_err(djrcv_dev->hidpp, "%s: can't destroy a NULL device\n", __func__); } } static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev, struct dj_workitem *workitem) { /* Called in delayed work context */ struct hid_device *djrcv_hdev = djrcv_dev->hidpp; struct hid_device *dj_hiddev; struct dj_device *dj_dev; u8 device_index = workitem->device_index; unsigned long flags; /* Device index goes from 1 to 6, we need 3 bytes to store the * semicolon, the index, and a null terminator */ unsigned char tmpstr[3]; /* We are the only one ever adding a device, no need to lock */ if (djrcv_dev->paired_dj_devices[device_index]) { /* The device is already known. No need to reallocate it. */ dbg_hid("%s: device is already known\n", __func__); return; } dj_hiddev = hid_allocate_device(); if (IS_ERR(dj_hiddev)) { hid_err(djrcv_hdev, "%s: hid_allocate_dev failed\n", __func__); return; } dj_hiddev->ll_driver = &logi_dj_ll_driver; dj_hiddev->dev.parent = &djrcv_hdev->dev; dj_hiddev->bus = BUS_USB; dj_hiddev->vendor = djrcv_hdev->vendor; dj_hiddev->product = (workitem->quad_id_msb << 8) | workitem->quad_id_lsb; if (workitem->device_type) { const char *type_str = "Device"; switch (workitem->device_type) { case 0x01: type_str = "Keyboard"; break; case 0x02: type_str = "Mouse"; break; case 0x03: type_str = "Numpad"; break; case 0x04: type_str = "Presenter"; break; case 0x07: type_str = "Remote Control"; break; case 0x08: type_str = "Trackball"; break; case 0x09: type_str = "Touchpad"; break; } snprintf(dj_hiddev->name, sizeof(dj_hiddev->name), "Logitech Wireless %s PID:%04x", type_str, dj_hiddev->product); } else { snprintf(dj_hiddev->name, sizeof(dj_hiddev->name), "Logitech Wireless Device PID:%04x", dj_hiddev->product); } if (djrcv_dev->type == recvr_type_27mhz) dj_hiddev->group = HID_GROUP_LOGITECH_27MHZ_DEVICE; else dj_hiddev->group = HID_GROUP_LOGITECH_DJ_DEVICE; memcpy(dj_hiddev->phys, djrcv_hdev->phys, sizeof(djrcv_hdev->phys)); snprintf(tmpstr, sizeof(tmpstr), ":%d", device_index); strlcat(dj_hiddev->phys, tmpstr, sizeof(dj_hiddev->phys)); dj_dev = kzalloc(sizeof(struct dj_device), GFP_KERNEL); if (!dj_dev) { hid_err(djrcv_hdev, "%s: failed allocating dj_dev\n", __func__); goto dj_device_allocate_fail; } dj_dev->reports_supported = workitem->reports_supported; dj_dev->hdev = dj_hiddev; dj_dev->dj_receiver_dev = djrcv_dev; dj_dev->device_index = device_index; dj_hiddev->driver_data = dj_dev; spin_lock_irqsave(&djrcv_dev->lock, flags); djrcv_dev->paired_dj_devices[device_index] = dj_dev; spin_unlock_irqrestore(&djrcv_dev->lock, flags); if (hid_add_device(dj_hiddev)) { hid_err(djrcv_hdev, "%s: failed adding dj_device\n", __func__); goto hid_add_device_fail; } return; hid_add_device_fail: spin_lock_irqsave(&djrcv_dev->lock, flags); djrcv_dev->paired_dj_devices[device_index] = NULL; spin_unlock_irqrestore(&djrcv_dev->lock, flags); kfree(dj_dev); dj_device_allocate_fail: hid_destroy_device(dj_hiddev); } static void delayedwork_callback(struct work_struct *work) { struct dj_receiver_dev *djrcv_dev = container_of(work, struct dj_receiver_dev, work); struct dj_workitem workitem; unsigned long flags; int count; int retval; dbg_hid("%s\n", __func__); spin_lock_irqsave(&djrcv_dev->lock, flags); /* * Since we attach to multiple interfaces, we may get scheduled before * we are bound to the HID++ interface, catch this. */ if (!djrcv_dev->ready) { pr_warn("%s: delayedwork queued before hidpp interface was enumerated\n", __func__); spin_unlock_irqrestore(&djrcv_dev->lock, flags); return; } count = kfifo_out(&djrcv_dev->notif_fifo, &workitem, sizeof(workitem)); if (count != sizeof(workitem)) { spin_unlock_irqrestore(&djrcv_dev->lock, flags); return; } if (!kfifo_is_empty(&djrcv_dev->notif_fifo)) schedule_work(&djrcv_dev->work); spin_unlock_irqrestore(&djrcv_dev->lock, flags); switch (workitem.type) { case WORKITEM_TYPE_PAIRED: logi_dj_recv_add_djhid_device(djrcv_dev, &workitem); break; case WORKITEM_TYPE_UNPAIRED: logi_dj_recv_destroy_djhid_device(djrcv_dev, &workitem); break; case WORKITEM_TYPE_UNKNOWN: retval = logi_dj_recv_query_paired_devices(djrcv_dev); if (retval) { hid_err(djrcv_dev->hidpp, "%s: logi_dj_recv_query_paired_devices error: %d\n", __func__, retval); } break; case WORKITEM_TYPE_EMPTY: dbg_hid("%s: device list is empty\n", __func__); break; } } /* * Sometimes we receive reports for which we do not have a paired dj_device * associated with the device_index or report-type to forward the report to. * This means that the original "device paired" notification corresponding * to the dj_device never arrived to this driver. Possible reasons for this are: * 1) hid-core discards all packets coming from a device during probe(). * 2) if the receiver is plugged into a KVM switch then the pairing reports * are only forwarded to it if the focus is on this PC. * This function deals with this by re-asking the receiver for the list of * connected devices in the delayed work callback. * This function MUST be called with djrcv->lock held. */ static void logi_dj_recv_queue_unknown_work(struct dj_receiver_dev *djrcv_dev) { struct dj_workitem workitem = { .type = WORKITEM_TYPE_UNKNOWN }; /* Rate limit queries done because of unhandled reports to 2/sec */ if (time_before(jiffies, djrcv_dev->last_query + HZ / 2)) return; kfifo_in(&djrcv_dev->notif_fifo, &workitem, sizeof(workitem)); schedule_work(&djrcv_dev->work); } static void logi_dj_recv_queue_notification(struct dj_receiver_dev *djrcv_dev, struct dj_report *dj_report) { /* We are called from atomic context (tasklet && djrcv->lock held) */ struct dj_workitem workitem = { .device_index = dj_report->device_index, }; switch (dj_report->report_type) { case REPORT_TYPE_NOTIF_DEVICE_PAIRED: workitem.type = WORKITEM_TYPE_PAIRED; if (dj_report->report_params[DEVICE_PAIRED_PARAM_SPFUNCTION] & SPFUNCTION_DEVICE_LIST_EMPTY) { workitem.type = WORKITEM_TYPE_EMPTY; break; } fallthrough; case REPORT_TYPE_NOTIF_DEVICE_UNPAIRED: workitem.quad_id_msb = dj_report->report_params[DEVICE_PAIRED_PARAM_EQUAD_ID_MSB]; workitem.quad_id_lsb = dj_report->report_params[DEVICE_PAIRED_PARAM_EQUAD_ID_LSB]; workitem.reports_supported = get_unaligned_le32( dj_report->report_params + DEVICE_PAIRED_RF_REPORT_TYPE); workitem.reports_supported |= HIDPP; if (dj_report->report_type == REPORT_TYPE_NOTIF_DEVICE_UNPAIRED) workitem.type = WORKITEM_TYPE_UNPAIRED; break; default: logi_dj_recv_queue_unknown_work(djrcv_dev); return; } kfifo_in(&djrcv_dev->notif_fifo, &workitem, sizeof(workitem)); schedule_work(&djrcv_dev->work); } /* * Some quad/bluetooth keyboards have a builtin touchpad in this case we see * only 1 paired device with a device_type of REPORT_TYPE_KEYBOARD. For the * touchpad to work we must also forward mouse input reports to the dj_hiddev * created for the keyboard (instead of forwarding them to a second paired * device with a device_type of REPORT_TYPE_MOUSE as we normally would). * * On Dinovo receivers the keyboard's touchpad and an optional paired actual * mouse send separate input reports, INPUT(2) aka STD_MOUSE for the mouse * and INPUT(5) aka KBD_MOUSE for the keyboard's touchpad. * * On MX5x00 receivers (which can also be paired with a Dinovo keyboard) * INPUT(2) is used for both an optional paired actual mouse and for the * keyboard's touchpad. */ static const u16 kbd_builtin_touchpad_ids[] = { 0xb309, /* Dinovo Edge */ 0xb30c, /* Dinovo Mini */ }; static void logi_hidpp_dev_conn_notif_equad(struct hid_device *hdev, struct hidpp_event *hidpp_report, struct dj_workitem *workitem) { struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev); int i, id; workitem->type = WORKITEM_TYPE_PAIRED; workitem->device_type = hidpp_report->params[HIDPP_PARAM_DEVICE_INFO] & HIDPP_DEVICE_TYPE_MASK; workitem->quad_id_msb = hidpp_report->params[HIDPP_PARAM_EQUAD_MSB]; workitem->quad_id_lsb = hidpp_report->params[HIDPP_PARAM_EQUAD_LSB]; switch (workitem->device_type) { case REPORT_TYPE_KEYBOARD: workitem->reports_supported |= STD_KEYBOARD | MULTIMEDIA | POWER_KEYS | MEDIA_CENTER | HIDPP; id = (workitem->quad_id_msb << 8) | workitem->quad_id_lsb; for (i = 0; i < ARRAY_SIZE(kbd_builtin_touchpad_ids); i++) { if (id == kbd_builtin_touchpad_ids[i]) { if (djrcv_dev->type == recvr_type_dinovo) workitem->reports_supported |= KBD_MOUSE; else workitem->reports_supported |= STD_MOUSE; break; } } break; case REPORT_TYPE_MOUSE: workitem->reports_supported |= STD_MOUSE | HIDPP; if (djrcv_dev->type == recvr_type_mouse_only) workitem->reports_supported |= MULTIMEDIA; break; } } static void logi_hidpp_dev_conn_notif_27mhz(struct hid_device *hdev, struct hidpp_event *hidpp_report, struct dj_workitem *workitem) { workitem->type = WORKITEM_TYPE_PAIRED; workitem->quad_id_lsb = hidpp_report->params[HIDPP_PARAM_27MHZ_DEVID]; switch (hidpp_report->device_index) { case 1: /* Index 1 is always a mouse */ case 2: /* Index 2 is always a mouse */ workitem->device_type = HIDPP_DEVICE_TYPE_MOUSE; workitem->reports_supported |= STD_MOUSE | HIDPP; break; case 3: /* Index 3 is always the keyboard */ if (hidpp_report->params[HIDPP_PARAM_DEVICE_INFO] & HIDPP_27MHZ_SECURE_MASK) { hid_info(hdev, "Keyboard connection is encrypted\n"); } else { hid_warn(hdev, "Keyboard events are send over the air in plain-text / unencrypted\n"); hid_warn(hdev, "See: https://gitlab.freedesktop.org/jwrdegoede/logitech-27mhz-keyboard-encryption-setup/\n"); } fallthrough; case 4: /* Index 4 is used for an optional separate numpad */ workitem->device_type = HIDPP_DEVICE_TYPE_KEYBOARD; workitem->reports_supported |= STD_KEYBOARD | MULTIMEDIA | POWER_KEYS | HIDPP; break; default: hid_warn(hdev, "%s: unexpected device-index %d", __func__, hidpp_report->device_index); } } static void logi_hidpp_recv_queue_notif(struct hid_device *hdev, struct hidpp_event *hidpp_report) { /* We are called from atomic context (tasklet && djrcv->lock held) */ struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev); const char *device_type = "UNKNOWN"; struct dj_workitem workitem = { .type = WORKITEM_TYPE_EMPTY, .device_index = hidpp_report->device_index, }; switch (hidpp_report->params[HIDPP_PARAM_PROTO_TYPE]) { case 0x01: device_type = "Bluetooth"; /* Bluetooth connect packet contents is the same as (e)QUAD */ logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem); if (!(hidpp_report->params[HIDPP_PARAM_DEVICE_INFO] & HIDPP_MANUFACTURER_MASK)) { hid_info(hdev, "Non Logitech device connected on slot %d\n", hidpp_report->device_index); workitem.reports_supported &= ~HIDPP; } break; case 0x02: device_type = "27 Mhz"; logi_hidpp_dev_conn_notif_27mhz(hdev, hidpp_report, &workitem); break; case 0x03: device_type = "QUAD or eQUAD"; logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem); break; case 0x04: device_type = "eQUAD step 4 DJ"; logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem); break; case 0x05: device_type = "DFU Lite"; break; case 0x06: device_type = "eQUAD step 4 Lite"; logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem); break; case 0x07: device_type = "eQUAD step 4 Gaming"; logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem); workitem.reports_supported |= STD_KEYBOARD; break; case 0x08: device_type = "eQUAD step 4 for gamepads"; break; case 0x0a: device_type = "eQUAD nano Lite"; logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem); break; case 0x0c: device_type = "eQUAD Lightspeed 1"; logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem); workitem.reports_supported |= STD_KEYBOARD; break; case 0x0d: device_type = "eQUAD Lightspeed 1.1"; logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem); workitem.reports_supported |= STD_KEYBOARD; break; case 0x0f: case 0x11: device_type = "eQUAD Lightspeed 1.2"; logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem); workitem.reports_supported |= STD_KEYBOARD; break; } /* custom receiver device (eg. powerplay) */ if (hidpp_report->device_index == 7) { workitem.reports_supported |= HIDPP; } if (workitem.type == WORKITEM_TYPE_EMPTY) { hid_warn(hdev, "unusable device of type %s (0x%02x) connected on slot %d", device_type, hidpp_report->params[HIDPP_PARAM_PROTO_TYPE], hidpp_report->device_index); return; } hid_info(hdev, "device of type %s (0x%02x) connected on slot %d", device_type, hidpp_report->params[HIDPP_PARAM_PROTO_TYPE], hidpp_report->device_index); kfifo_in(&djrcv_dev->notif_fifo, &workitem, sizeof(workitem)); schedule_work(&djrcv_dev->work); } static void logi_dj_recv_forward_null_report(struct dj_receiver_dev *djrcv_dev, struct dj_report *dj_report) { /* We are called from atomic context (tasklet && djrcv->lock held) */ unsigned int i; u8 reportbuffer[MAX_REPORT_SIZE]; struct dj_device *djdev; djdev = djrcv_dev->paired_dj_devices[dj_report->device_index]; memset(reportbuffer, 0, sizeof(reportbuffer)); for (i = 0; i < NUMBER_OF_HID_REPORTS; i++) { if (djdev->reports_supported & (1 << i)) { reportbuffer[0] = i; if (hid_input_report(djdev->hdev, HID_INPUT_REPORT, reportbuffer, hid_reportid_size_map[i], 1)) { dbg_hid("hid_input_report error sending null " "report\n"); } } } } static void logi_dj_recv_forward_dj(struct dj_receiver_dev *djrcv_dev, struct dj_report *dj_report) { /* We are called from atomic context (tasklet && djrcv->lock held) */ struct dj_device *dj_device; dj_device = djrcv_dev->paired_dj_devices[dj_report->device_index]; if ((dj_report->report_type > ARRAY_SIZE(hid_reportid_size_map) - 1) || (hid_reportid_size_map[dj_report->report_type] == 0)) { dbg_hid("invalid report type:%x\n", dj_report->report_type); return; } if (hid_input_report(dj_device->hdev, HID_INPUT_REPORT, &dj_report->report_type, hid_reportid_size_map[dj_report->report_type], 1)) { dbg_hid("hid_input_report error\n"); } } static void logi_dj_recv_forward_report(struct dj_device *dj_dev, u8 *data, int size) { /* We are called from atomic context (tasklet && djrcv->lock held) */ if (hid_input_report(dj_dev->hdev, HID_INPUT_REPORT, data, size, 1)) dbg_hid("hid_input_report error\n"); } static void logi_dj_recv_forward_input_report(struct hid_device *hdev, u8 *data, int size) { struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev); struct dj_device *dj_dev; unsigned long flags; u8 report = data[0]; int i; if (report > REPORT_TYPE_RFREPORT_LAST) { hid_err(hdev, "Unexpected input report number %d\n", report); return; } spin_lock_irqsave(&djrcv_dev->lock, flags); for (i = 0; i < (DJ_MAX_PAIRED_DEVICES + DJ_DEVICE_INDEX_MIN); i++) { dj_dev = djrcv_dev->paired_dj_devices[i]; if (dj_dev && (dj_dev->reports_supported & BIT(report))) { logi_dj_recv_forward_report(dj_dev, data, size); spin_unlock_irqrestore(&djrcv_dev->lock, flags); return; } } logi_dj_recv_queue_unknown_work(djrcv_dev); spin_unlock_irqrestore(&djrcv_dev->lock, flags); dbg_hid("No dj-devs handling input report number %d\n", report); } static int logi_dj_recv_send_report(struct dj_receiver_dev *djrcv_dev, struct dj_report *dj_report) { struct hid_device *hdev = djrcv_dev->hidpp; struct hid_report *report; struct hid_report_enum *output_report_enum; u8 *data = (u8 *)(&dj_report->device_index); unsigned int i; output_report_enum = &hdev->report_enum[HID_OUTPUT_REPORT]; report = output_report_enum->report_id_hash[REPORT_ID_DJ_SHORT]; if (!report) { hid_err(hdev, "%s: unable to find dj report\n", __func__); return -ENODEV; } for (i = 0; i < DJREPORT_SHORT_LENGTH - 1; i++) report->field[0]->value[i] = data[i]; hid_hw_request(hdev, report, HID_REQ_SET_REPORT); return 0; } static int logi_dj_recv_query_hidpp_devices(struct dj_receiver_dev *djrcv_dev) { static const u8 template[] = { REPORT_ID_HIDPP_SHORT, HIDPP_RECEIVER_INDEX, HIDPP_SET_REGISTER, HIDPP_REG_CONNECTION_STATE, HIDPP_FAKE_DEVICE_ARRIVAL, 0x00, 0x00 }; u8 *hidpp_report; int retval; hidpp_report = kmemdup(template, sizeof(template), GFP_KERNEL); if (!hidpp_report) return -ENOMEM; retval = hid_hw_raw_request(djrcv_dev->hidpp, REPORT_ID_HIDPP_SHORT, hidpp_report, sizeof(template), HID_OUTPUT_REPORT, HID_REQ_SET_REPORT); kfree(hidpp_report); return (retval < 0) ? retval : 0; } static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) { struct dj_report *dj_report; int retval; djrcv_dev->last_query = jiffies; if (djrcv_dev->type != recvr_type_dj) return logi_dj_recv_query_hidpp_devices(djrcv_dev); dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL); if (!dj_report) return -ENOMEM; dj_report->report_id = REPORT_ID_DJ_SHORT; dj_report->device_index = HIDPP_RECEIVER_INDEX; dj_report->report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES; retval = logi_dj_recv_send_report(djrcv_dev, dj_report); kfree(dj_report); return retval; } static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev, unsigned timeout) { struct hid_device *hdev = djrcv_dev->hidpp; struct dj_report *dj_report; u8 *buf; int retval = 0; dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL); if (!dj_report) return -ENOMEM; if (djrcv_dev->type == recvr_type_dj) { dj_report->report_id = REPORT_ID_DJ_SHORT; dj_report->device_index = HIDPP_RECEIVER_INDEX; dj_report->report_type = REPORT_TYPE_CMD_SWITCH; dj_report->report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F; dj_report->report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout; retval = logi_dj_recv_send_report(djrcv_dev, dj_report); /* * Ugly sleep to work around a USB 3.0 bug when the receiver is * still processing the "switch-to-dj" command while we send an * other command. * 50 msec should gives enough time to the receiver to be ready. */ msleep(50); } /* * Magical bits to set up hidpp notifications when the dj devices * are connected/disconnected. * * We can reuse dj_report because HIDPP_REPORT_SHORT_LENGTH is smaller * than DJREPORT_SHORT_LENGTH. */ buf = (u8 *)dj_report; memset(buf, 0, HIDPP_REPORT_SHORT_LENGTH); buf[0] = REPORT_ID_HIDPP_SHORT; buf[1] = HIDPP_RECEIVER_INDEX; buf[2] = 0x80; buf[3] = 0x00; buf[4] = 0x00; buf[5] = 0x09; buf[6] = 0x00; hid_hw_raw_request(hdev, REPORT_ID_HIDPP_SHORT, buf, HIDPP_REPORT_SHORT_LENGTH, HID_OUTPUT_REPORT, HID_REQ_SET_REPORT); kfree(dj_report); return retval; } static int logi_dj_ll_open(struct hid_device *hid) { dbg_hid("%s: %s\n", __func__, hid->phys); return 0; } static void logi_dj_ll_close(struct hid_device *hid) { dbg_hid("%s: %s\n", __func__, hid->phys); } /* * Register 0xB5 is "pairing information". It is solely intended for the * receiver, so do not overwrite the device index. */ static u8 unifying_pairing_query[] = { REPORT_ID_HIDPP_SHORT, HIDPP_RECEIVER_INDEX, HIDPP_GET_LONG_REGISTER, HIDPP_REG_PAIRING_INFORMATION }; static u8 unifying_pairing_answer[] = { REPORT_ID_HIDPP_LONG, HIDPP_RECEIVER_INDEX, HIDPP_GET_LONG_REGISTER, HIDPP_REG_PAIRING_INFORMATION }; static int logi_dj_ll_raw_request(struct hid_device *hid, unsigned char reportnum, __u8 *buf, size_t count, unsigned char report_type, int reqtype) { struct dj_device *djdev = hid->driver_data; struct dj_receiver_dev *djrcv_dev = djdev->dj_receiver_dev; u8 *out_buf; int ret; if ((buf[0] == REPORT_ID_HIDPP_SHORT) || (buf[0] == REPORT_ID_HIDPP_LONG) || (buf[0] == REPORT_ID_HIDPP_VERY_LONG)) { if (count < 2) return -EINVAL; /* special case where we should not overwrite * the device_index */ if (count == 7 && !memcmp(buf, unifying_pairing_query, sizeof(unifying_pairing_query))) buf[4] = (buf[4] & 0xf0) | (djdev->device_index - 1); else buf[1] = djdev->device_index; return hid_hw_raw_request(djrcv_dev->hidpp, reportnum, buf, count, report_type, reqtype); } if (buf[0] != REPORT_TYPE_LEDS) return -EINVAL; if (djrcv_dev->type != recvr_type_dj && count >= 2) { if (!djrcv_dev->keyboard) { hid_warn(hid, "Received REPORT_TYPE_LEDS request before the keyboard interface was enumerated\n"); return 0; } /* usbhid overrides the report ID and ignores the first byte */ return hid_hw_raw_request(djrcv_dev->keyboard, 0, buf, count, report_type, reqtype); } out_buf = kzalloc(DJREPORT_SHORT_LENGTH, GFP_ATOMIC); if (!out_buf) return -ENOMEM; if (count > DJREPORT_SHORT_LENGTH - 2) count = DJREPORT_SHORT_LENGTH - 2; out_buf[0] = REPORT_ID_DJ_SHORT; out_buf[1] = djdev->device_index; memcpy(out_buf + 2, buf, count); ret = hid_hw_raw_request(djrcv_dev->hidpp, out_buf[0], out_buf, DJREPORT_SHORT_LENGTH, report_type, reqtype); kfree(out_buf); return ret; } static void rdcat(char *rdesc, unsigned int *rsize, const char *data, unsigned int size) { memcpy(rdesc + *rsize, data, size); *rsize += size; } static int logi_dj_ll_parse(struct hid_device *hid) { struct dj_device *djdev = hid->driver_data; unsigned int rsize = 0; char *rdesc; int retval; dbg_hid("%s\n", __func__); djdev->hdev->version = 0x0111; djdev->hdev->country = 0x00; rdesc = kmalloc(MAX_RDESC_SIZE, GFP_KERNEL); if (!rdesc) return -ENOMEM; if (djdev->reports_supported & STD_KEYBOARD) { dbg_hid("%s: sending a kbd descriptor, reports_supported: %llx\n", __func__, djdev->reports_supported); rdcat(rdesc, &rsize, kbd_descriptor, sizeof(kbd_descriptor)); } if (djdev->reports_supported & STD_MOUSE) { dbg_hid("%s: sending a mouse descriptor, reports_supported: %llx\n", __func__, djdev->reports_supported); if (djdev->dj_receiver_dev->type == recvr_type_gaming_hidpp || djdev->dj_receiver_dev->type == recvr_type_mouse_only) rdcat(rdesc, &rsize, mse_high_res_descriptor, sizeof(mse_high_res_descriptor)); else if (djdev->dj_receiver_dev->type == recvr_type_27mhz) rdcat(rdesc, &rsize, mse_27mhz_descriptor, sizeof(mse_27mhz_descriptor)); else if (recvr_type_is_bluetooth(djdev->dj_receiver_dev->type)) rdcat(rdesc, &rsize, mse_bluetooth_descriptor, sizeof(mse_bluetooth_descriptor)); else rdcat(rdesc, &rsize, mse_descriptor, sizeof(mse_descriptor)); } if (djdev->reports_supported & KBD_MOUSE) { dbg_hid("%s: sending a kbd-mouse descriptor, reports_supported: %llx\n", __func__, djdev->reports_supported); rdcat(rdesc, &rsize, mse5_bluetooth_descriptor, sizeof(mse5_bluetooth_descriptor)); } if (djdev->reports_supported & MULTIMEDIA) { dbg_hid("%s: sending a multimedia report descriptor: %llx\n", __func__, djdev->reports_supported); rdcat(rdesc, &rsize, consumer_descriptor, sizeof(consumer_descriptor)); } if (djdev->reports_supported & POWER_KEYS) { dbg_hid("%s: sending a power keys report descriptor: %llx\n", __func__, djdev->reports_supported); rdcat(rdesc, &rsize, syscontrol_descriptor, sizeof(syscontrol_descriptor)); } if (djdev->reports_supported & MEDIA_CENTER) { dbg_hid("%s: sending a media center report descriptor: %llx\n", __func__, djdev->reports_supported); rdcat(rdesc, &rsize, media_descriptor, sizeof(media_descriptor)); } if (djdev->reports_supported & KBD_LEDS) { dbg_hid("%s: need to send kbd leds report descriptor: %llx\n", __func__, djdev->reports_supported); } if (djdev->reports_supported & HIDPP) { dbg_hid("%s: sending a HID++ descriptor, reports_supported: %llx\n", __func__, djdev->reports_supported); rdcat(rdesc, &rsize, hidpp_descriptor, sizeof(hidpp_descriptor)); } retval = hid_parse_report(hid, rdesc, rsize); kfree(rdesc); return retval; } static int logi_dj_ll_start(struct hid_device *hid) { dbg_hid("%s\n", __func__); return 0; } static void logi_dj_ll_stop(struct hid_device *hid) { dbg_hid("%s\n", __func__); } static bool logi_dj_ll_may_wakeup(struct hid_device *hid) { struct dj_device *djdev = hid->driver_data; struct dj_receiver_dev *djrcv_dev = djdev->dj_receiver_dev; return hid_hw_may_wakeup(djrcv_dev->hidpp); } static struct hid_ll_driver logi_dj_ll_driver = { .parse = logi_dj_ll_parse, .start = logi_dj_ll_start, .stop = logi_dj_ll_stop, .open = logi_dj_ll_open, .close = logi_dj_ll_close, .raw_request = logi_dj_ll_raw_request, .may_wakeup = logi_dj_ll_may_wakeup, }; static int logi_dj_dj_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size) { struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev); struct dj_report *dj_report = (struct dj_report *) data; unsigned long flags; /* * Here we receive all data coming from iface 2, there are 3 cases: * * 1) Data is intended for this driver i. e. data contains arrival, * departure, etc notifications, in which case we queue them for delayed * processing by the work queue. We return 1 to hid-core as no further * processing is required from it. * * 2) Data informs a connection change, if the change means rf link * loss, then we must send a null report to the upper layer to discard * potentially pressed keys that may be repeated forever by the input * layer. Return 1 to hid-core as no further processing is required. * * 3) Data is an actual input event from a paired DJ device in which * case we forward it to the correct hid device (via hid_input_report() * ) and return 1 so hid-core does not anything else with it. */ if ((dj_report->device_index < DJ_DEVICE_INDEX_MIN) || (dj_report->device_index > DJ_DEVICE_INDEX_MAX)) { /* * Device index is wrong, bail out. * This driver can ignore safely the receiver notifications, * so ignore those reports too. */ if (dj_report->device_index != DJ_RECEIVER_INDEX) hid_err(hdev, "%s: invalid device index:%d\n", __func__, dj_report->device_index); return false; } spin_lock_irqsave(&djrcv_dev->lock, flags); if (!djrcv_dev->paired_dj_devices[dj_report->device_index]) { /* received an event for an unknown device, bail out */ logi_dj_recv_queue_notification(djrcv_dev, dj_report); goto out; } switch (dj_report->report_type) { case REPORT_TYPE_NOTIF_DEVICE_PAIRED: /* pairing notifications are handled above the switch */ break; case REPORT_TYPE_NOTIF_DEVICE_UNPAIRED: logi_dj_recv_queue_notification(djrcv_dev, dj_report); break; case REPORT_TYPE_NOTIF_CONNECTION_STATUS: if (dj_report->report_params[CONNECTION_STATUS_PARAM_STATUS] == STATUS_LINKLOSS) { logi_dj_recv_forward_null_report(djrcv_dev, dj_report); } break; default: logi_dj_recv_forward_dj(djrcv_dev, dj_report); } out: spin_unlock_irqrestore(&djrcv_dev->lock, flags); return true; } static int logi_dj_hidpp_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size) { struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev); struct hidpp_event *hidpp_report = (struct hidpp_event *) data; struct dj_device *dj_dev; unsigned long flags; u8 device_index = hidpp_report->device_index; if (device_index == HIDPP_RECEIVER_INDEX) { /* special case were the device wants to know its unifying * name */ if (size == HIDPP_REPORT_LONG_LENGTH && !memcmp(data, unifying_pairing_answer, sizeof(unifying_pairing_answer))) device_index = (data[4] & 0x0F) + 1; else return false; } /* * Data is from the HID++ collection, in this case, we forward the * data to the corresponding child dj device and return 0 to hid-core * so he data also goes to the hidraw device of the receiver. This * allows a user space application to implement the full HID++ routing * via the receiver. */ if ((device_index < DJ_DEVICE_INDEX_MIN) || (device_index > DJ_DEVICE_INDEX_MAX)) { /* * Device index is wrong, bail out. * This driver can ignore safely the receiver notifications, * so ignore those reports too. */ hid_err(hdev, "%s: invalid device index:%d\n", __func__, hidpp_report->device_index); return false; } spin_lock_irqsave(&djrcv_dev->lock, flags); dj_dev = djrcv_dev->paired_dj_devices[device_index]; /* * With 27 MHz receivers, we do not get an explicit unpair event, * remove the old device if the user has paired a *different* device. */ if (djrcv_dev->type == recvr_type_27mhz && dj_dev && hidpp_report->sub_id == REPORT_TYPE_NOTIF_DEVICE_CONNECTED && hidpp_report->params[HIDPP_PARAM_PROTO_TYPE] == 0x02 && hidpp_report->params[HIDPP_PARAM_27MHZ_DEVID] != dj_dev->hdev->product) { struct dj_workitem workitem = { .device_index = hidpp_report->device_index, .type = WORKITEM_TYPE_UNPAIRED, }; kfifo_in(&djrcv_dev->notif_fifo, &workitem, sizeof(workitem)); /* logi_hidpp_recv_queue_notif will queue the work */ dj_dev = NULL; } if (dj_dev) { logi_dj_recv_forward_report(dj_dev, data, size); } else { if (hidpp_report->sub_id == REPORT_TYPE_NOTIF_DEVICE_CONNECTED) logi_hidpp_recv_queue_notif(hdev, hidpp_report); else logi_dj_recv_queue_unknown_work(djrcv_dev); } spin_unlock_irqrestore(&djrcv_dev->lock, flags); return false; } static int logi_dj_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size) { struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev); dbg_hid("%s, size:%d\n", __func__, size); if (!djrcv_dev) return 0; if (!hdev->report_enum[HID_INPUT_REPORT].numbered) { if (djrcv_dev->unnumbered_application == HID_GD_KEYBOARD) { /* * For the keyboard, we can reuse the same report by * using the second byte which is constant in the USB * HID report descriptor. */ data[1] = data[0]; data[0] = REPORT_TYPE_KEYBOARD; logi_dj_recv_forward_input_report(hdev, data, size); /* restore previous state */ data[0] = data[1]; data[1] = 0; } /* * Mouse-only receivers send unnumbered mouse data. The 27 MHz * receiver uses 6 byte packets, the nano receiver 8 bytes. */ if (djrcv_dev->unnumbered_application == HID_GD_MOUSE && size <= 8) { u8 mouse_report[9]; /* Prepend report id */ mouse_report[0] = REPORT_TYPE_MOUSE; memcpy(mouse_report + 1, data, size); logi_dj_recv_forward_input_report(hdev, mouse_report, size + 1); } return false; } switch (data[0]) { case REPORT_ID_DJ_SHORT: if (size != DJREPORT_SHORT_LENGTH) { hid_err(hdev, "Short DJ report bad size (%d)", size); return false; } return logi_dj_dj_event(hdev, report, data, size); case REPORT_ID_DJ_LONG: if (size != DJREPORT_LONG_LENGTH) { hid_err(hdev, "Long DJ report bad size (%d)", size); return false; } return logi_dj_dj_event(hdev, report, data, size); case REPORT_ID_HIDPP_SHORT: if (size != HIDPP_REPORT_SHORT_LENGTH) { hid_err(hdev, "Short HID++ report bad size (%d)", size); return false; } return logi_dj_hidpp_event(hdev, report, data, size); case REPORT_ID_HIDPP_LONG: if (size != HIDPP_REPORT_LONG_LENGTH) { hid_err(hdev, "Long HID++ report bad size (%d)", size); return false; } return logi_dj_hidpp_event(hdev, report, data, size); } logi_dj_recv_forward_input_report(hdev, data, size); return false; } static int logi_dj_probe(struct hid_device *hdev, const struct hid_device_id *id) { struct hid_report_enum *rep_enum; struct hid_report *rep; struct dj_receiver_dev *djrcv_dev; struct usb_interface *intf; unsigned int no_dj_interfaces = 0; bool has_hidpp = false; unsigned long flags; int retval; /* * Call to usbhid to fetch the HID descriptors of the current * interface subsequently call to the hid/hid-core to parse the * fetched descriptors. */ retval = hid_parse(hdev); if (retval) { hid_err(hdev, "%s: parse failed\n", __func__); return retval; } /* * Some KVMs add an extra interface for e.g. mouse emulation. If we * treat these as logitech-dj interfaces then this causes input events * reported through this extra interface to not be reported correctly. * To avoid this, we treat these as generic-hid devices. */ switch (id->driver_data) { case recvr_type_dj: no_dj_interfaces = 3; break; case recvr_type_hidpp: no_dj_interfaces = 2; break; case recvr_type_gaming_hidpp: no_dj_interfaces = 3; break; case recvr_type_mouse_only: no_dj_interfaces = 2; break; case recvr_type_27mhz: no_dj_interfaces = 2; break; case recvr_type_bluetooth: no_dj_interfaces = 2; break; case recvr_type_dinovo: no_dj_interfaces = 2; break; } if (hid_is_usb(hdev)) { intf = to_usb_interface(hdev->dev.parent); if (intf && intf->altsetting->desc.bInterfaceNumber >= no_dj_interfaces) { hdev->quirks |= HID_QUIRK_INPUT_PER_APP; return hid_hw_start(hdev, HID_CONNECT_DEFAULT); } } rep_enum = &hdev->report_enum[HID_INPUT_REPORT]; /* no input reports, bail out */ if (list_empty(&rep_enum->report_list)) return -ENODEV; /* * Check for the HID++ application. * Note: we should theoretically check for HID++ and DJ * collections, but this will do. */ list_for_each_entry(rep, &rep_enum->report_list, list) { if (rep->application == 0xff000001) has_hidpp = true; } /* * Ignore interfaces without DJ/HID++ collection, they will not carry * any data, dont create any hid_device for them. */ if (!has_hidpp && id->driver_data == recvr_type_dj) return -ENODEV; /* get the current application attached to the node */ rep = list_first_entry(&rep_enum->report_list, struct hid_report, list); djrcv_dev = dj_get_receiver_dev(hdev, id->driver_data, rep->application, has_hidpp); if (!djrcv_dev) { hid_err(hdev, "%s: dj_get_receiver_dev failed\n", __func__); return -ENOMEM; } if (!rep_enum->numbered) djrcv_dev->unnumbered_application = rep->application; /* Starts the usb device and connects to upper interfaces hiddev and * hidraw */ retval = hid_hw_start(hdev, HID_CONNECT_HIDRAW|HID_CONNECT_HIDDEV); if (retval) { hid_err(hdev, "%s: hid_hw_start returned error\n", __func__); goto hid_hw_start_fail; } if (has_hidpp) { retval = logi_dj_recv_switch_to_dj_mode(djrcv_dev, 0); if (retval < 0) { hid_err(hdev, "%s: logi_dj_recv_switch_to_dj_mode returned error:%d\n", __func__, retval); goto switch_to_dj_mode_fail; } } /* This is enabling the polling urb on the IN endpoint */ retval = hid_hw_open(hdev); if (retval < 0) { hid_err(hdev, "%s: hid_hw_open returned error:%d\n", __func__, retval); goto llopen_failed; } /* Allow incoming packets to arrive: */ hid_device_io_start(hdev); if (has_hidpp) { spin_lock_irqsave(&djrcv_dev->lock, flags); djrcv_dev->ready = true; spin_unlock_irqrestore(&djrcv_dev->lock, flags); retval = logi_dj_recv_query_paired_devices(djrcv_dev); if (retval < 0) { hid_err(hdev, "%s: logi_dj_recv_query_paired_devices error:%d\n", __func__, retval); /* * This can happen with a KVM, let the probe succeed, * logi_dj_recv_queue_unknown_work will retry later. */ } } return 0; llopen_failed: switch_to_dj_mode_fail: hid_hw_stop(hdev); hid_hw_start_fail: dj_put_receiver_dev(hdev); return retval; } #ifdef CONFIG_PM static int logi_dj_reset_resume(struct hid_device *hdev) { int retval; struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev); if (!djrcv_dev || djrcv_dev->hidpp != hdev) return 0; retval = logi_dj_recv_switch_to_dj_mode(djrcv_dev, 0); if (retval < 0) { hid_err(hdev, "%s: logi_dj_recv_switch_to_dj_mode returned error:%d\n", __func__, retval); } return 0; } #endif static void logi_dj_remove(struct hid_device *hdev) { struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev); struct dj_device *dj_dev; unsigned long flags; int i; dbg_hid("%s\n", __func__); if (!djrcv_dev) return hid_hw_stop(hdev); /* * This ensures that if the work gets requeued from another * interface of the same receiver it will be a no-op. */ spin_lock_irqsave(&djrcv_dev->lock, flags); djrcv_dev->ready = false; spin_unlock_irqrestore(&djrcv_dev->lock, flags); cancel_work_sync(&djrcv_dev->work); hid_hw_close(hdev); hid_hw_stop(hdev); /* * For proper operation we need access to all interfaces, so we destroy * the paired devices when we're unbound from any interface. * * Note we may still be bound to other interfaces, sharing the same * djrcv_dev, so we need locking here. */ for (i = 0; i < (DJ_MAX_PAIRED_DEVICES + DJ_DEVICE_INDEX_MIN); i++) { spin_lock_irqsave(&djrcv_dev->lock, flags); dj_dev = djrcv_dev->paired_dj_devices[i]; djrcv_dev->paired_dj_devices[i] = NULL; spin_unlock_irqrestore(&djrcv_dev->lock, flags); if (dj_dev != NULL) { hid_destroy_device(dj_dev->hdev); kfree(dj_dev); } } dj_put_receiver_dev(hdev); } static const struct hid_device_id logi_dj_receivers[] = { { /* Logitech unifying receiver (0xc52b) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER), .driver_data = recvr_type_dj}, { /* Logitech unifying receiver (0xc532) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2), .driver_data = recvr_type_dj}, { /* Logitech Nano mouse only receiver (0xc52f) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_NANO_RECEIVER), .driver_data = recvr_type_mouse_only}, { /* Logitech Nano (non DJ) receiver (0xc534) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_2), .driver_data = recvr_type_hidpp}, { /* Logitech G700(s) receiver (0xc531) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G700_RECEIVER), .driver_data = recvr_type_gaming_hidpp}, { /* Logitech G602 receiver (0xc537) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xc537), .driver_data = recvr_type_gaming_hidpp}, { /* Logitech lightspeed receiver (0xc539) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1), .driver_data = recvr_type_gaming_hidpp}, { /* Logitech powerplay receiver (0xc53a) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_POWERPLAY), .driver_data = recvr_type_gaming_hidpp}, { /* Logitech lightspeed receiver (0xc53f) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1), .driver_data = recvr_type_gaming_hidpp}, { /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER), .driver_data = recvr_type_27mhz}, { /* Logitech 27 MHz HID++ 1.0 receiver (0xc517) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2), .driver_data = recvr_type_27mhz}, { /* Logitech 27 MHz HID++ 1.0 mouse-only receiver (0xc51b) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_27MHZ_MOUSE_RECEIVER), .driver_data = recvr_type_27mhz}, { /* Logitech MX5000 HID++ / bluetooth receiver keyboard intf. (0xc70e) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX5000_RECEIVER_KBD_DEV), .driver_data = recvr_type_bluetooth}, { /* Logitech MX5000 HID++ / bluetooth receiver mouse intf. (0xc70a) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX5000_RECEIVER_MOUSE_DEV), .driver_data = recvr_type_bluetooth}, { /* Logitech MX5500 HID++ / bluetooth receiver keyboard intf. (0xc71b) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX5500_RECEIVER_KBD_DEV), .driver_data = recvr_type_bluetooth}, { /* Logitech MX5500 HID++ / bluetooth receiver mouse intf. (0xc71c) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX5500_RECEIVER_MOUSE_DEV), .driver_data = recvr_type_bluetooth}, { /* Logitech Dinovo Edge HID++ / bluetooth receiver keyboard intf. (0xc713) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_EDGE_RECEIVER_KBD_DEV), .driver_data = recvr_type_dinovo}, { /* Logitech Dinovo Edge HID++ / bluetooth receiver mouse intf. (0xc714) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_EDGE_RECEIVER_MOUSE_DEV), .driver_data = recvr_type_dinovo}, { /* Logitech DiNovo Mini HID++ / bluetooth receiver mouse intf. (0xc71e) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_MINI_RECEIVER_KBD_DEV), .driver_data = recvr_type_dinovo}, { /* Logitech DiNovo Mini HID++ / bluetooth receiver keyboard intf. (0xc71f) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_MINI_RECEIVER_MOUSE_DEV), .driver_data = recvr_type_dinovo}, {} }; MODULE_DEVICE_TABLE(hid, logi_dj_receivers); static struct hid_driver logi_djreceiver_driver = { .name = "logitech-djreceiver", .id_table = logi_dj_receivers, .probe = logi_dj_probe, .remove = logi_dj_remove, .raw_event = logi_dj_raw_event, #ifdef CONFIG_PM .reset_resume = logi_dj_reset_resume, #endif }; module_hid_driver(logi_djreceiver_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Logitech"); MODULE_AUTHOR("Nestor Lopez Casado"); MODULE_AUTHOR("nlopezcasad@logitech.com");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1