Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Benjamin Tissoires | 1841 | 54.13% | 7 | 12.07% |
Andrew Duggan | 1244 | 36.58% | 17 | 29.31% |
Jiri Slaby | 151 | 4.44% | 4 | 6.90% |
Tobias Auerochs | 57 | 1.68% | 1 | 1.72% |
Linus Torvalds (pre-git) | 24 | 0.71% | 8 | 13.79% |
Jiri Kosina | 22 | 0.65% | 6 | 10.34% |
Dmitry Torokhov | 18 | 0.53% | 2 | 3.45% |
Stephen Chandler Paul | 14 | 0.41% | 1 | 1.72% |
Jiangshan Yi | 11 | 0.32% | 1 | 1.72% |
Joe Perches | 4 | 0.12% | 1 | 1.72% |
Dan Carpenter | 3 | 0.09% | 1 | 1.72% |
Linus Torvalds | 2 | 0.06% | 2 | 3.45% |
Thomas Gleixner | 2 | 0.06% | 1 | 1.72% |
David Herrmann | 2 | 0.06% | 1 | 1.72% |
Aaron Ma | 2 | 0.06% | 1 | 1.72% |
Kay Sievers | 1 | 0.03% | 1 | 1.72% |
Vincent Huang | 1 | 0.03% | 1 | 1.72% |
Vojtech Pavlik | 1 | 0.03% | 1 | 1.72% |
Stéphane Voltz | 1 | 0.03% | 1 | 1.72% |
Total | 3401 | 58 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (c) 2013 Andrew Duggan <aduggan@synaptics.com> * Copyright (c) 2013 Synaptics Incorporated * Copyright (c) 2014 Benjamin Tissoires <benjamin.tissoires@gmail.com> * Copyright (c) 2014 Red Hat, Inc */ #include <linux/kernel.h> #include <linux/hid.h> #include <linux/input.h> #include <linux/input/mt.h> #include <linux/irq.h> #include <linux/irqdomain.h> #include <linux/module.h> #include <linux/pm.h> #include <linux/slab.h> #include <linux/wait.h> #include <linux/sched.h> #include <linux/rmi.h> #include "hid-ids.h" #define RMI_MOUSE_REPORT_ID 0x01 /* Mouse emulation Report */ #define RMI_WRITE_REPORT_ID 0x09 /* Output Report */ #define RMI_READ_ADDR_REPORT_ID 0x0a /* Output Report */ #define RMI_READ_DATA_REPORT_ID 0x0b /* Input Report */ #define RMI_ATTN_REPORT_ID 0x0c /* Input Report */ #define RMI_SET_RMI_MODE_REPORT_ID 0x0f /* Feature Report */ /* flags */ #define RMI_READ_REQUEST_PENDING 0 #define RMI_READ_DATA_PENDING 1 #define RMI_STARTED 2 /* device flags */ #define RMI_DEVICE BIT(0) #define RMI_DEVICE_HAS_PHYS_BUTTONS BIT(1) #define RMI_DEVICE_OUTPUT_SET_REPORT BIT(2) /* * retrieve the ctrl registers * the ctrl register has a size of 20 but a fw bug split it into 16 + 4, * and there is no way to know if the first 20 bytes are here or not. * We use only the first 12 bytes, so get only them. */ #define RMI_F11_CTRL_REG_COUNT 12 enum rmi_mode_type { RMI_MODE_OFF = 0, RMI_MODE_ATTN_REPORTS = 1, RMI_MODE_NO_PACKED_ATTN_REPORTS = 2, }; /** * struct rmi_data - stores information for hid communication * * @page_mutex: Locks current page to avoid changing pages in unexpected ways. * @page: Keeps track of the current virtual page * @xport: transport device to be registered with the RMI4 core. * * @wait: Used for waiting for read data * * @writeReport: output buffer when writing RMI registers * @readReport: input buffer when reading RMI registers * * @input_report_size: size of an input report (advertised by HID) * @output_report_size: size of an output report (advertised by HID) * * @flags: flags for the current device (started, reading, etc...) * * @reset_work: worker which will be called in case of a mouse report * @hdev: pointer to the struct hid_device * * @device_flags: flags which describe the device * * @domain: the IRQ domain allocated for this RMI4 device * @rmi_irq: the irq that will be used to generate events to rmi-core */ struct rmi_data { struct mutex page_mutex; int page; struct rmi_transport_dev xport; wait_queue_head_t wait; u8 *writeReport; u8 *readReport; u32 input_report_size; u32 output_report_size; unsigned long flags; struct work_struct reset_work; struct hid_device *hdev; unsigned long device_flags; struct irq_domain *domain; int rmi_irq; }; #define RMI_PAGE(addr) (((addr) >> 8) & 0xff) static int rmi_write_report(struct hid_device *hdev, u8 *report, int len); /** * rmi_set_page - Set RMI page * @hdev: The pointer to the hid_device struct * @page: The new page address. * * RMI devices have 16-bit addressing, but some of the physical * implementations (like SMBus) only have 8-bit addressing. So RMI implements * a page address at 0xff of every page so we can reliable page addresses * every 256 registers. * * The page_mutex lock must be held when this function is entered. * * Returns zero on success, non-zero on failure. */ static int rmi_set_page(struct hid_device *hdev, u8 page) { struct rmi_data *data = hid_get_drvdata(hdev); int retval; data->writeReport[0] = RMI_WRITE_REPORT_ID; data->writeReport[1] = 1; data->writeReport[2] = 0xFF; data->writeReport[4] = page; retval = rmi_write_report(hdev, data->writeReport, data->output_report_size); if (retval != data->output_report_size) { dev_err(&hdev->dev, "%s: set page failed: %d.", __func__, retval); return retval; } data->page = page; return 0; } static int rmi_set_mode(struct hid_device *hdev, u8 mode) { int ret; const u8 txbuf[2] = {RMI_SET_RMI_MODE_REPORT_ID, mode}; u8 *buf; buf = kmemdup(txbuf, sizeof(txbuf), GFP_KERNEL); if (!buf) return -ENOMEM; ret = hid_hw_raw_request(hdev, RMI_SET_RMI_MODE_REPORT_ID, buf, sizeof(txbuf), HID_FEATURE_REPORT, HID_REQ_SET_REPORT); kfree(buf); if (ret < 0) { dev_err(&hdev->dev, "unable to set rmi mode to %d (%d)\n", mode, ret); return ret; } return 0; } static int rmi_write_report(struct hid_device *hdev, u8 *report, int len) { struct rmi_data *data = hid_get_drvdata(hdev); int ret; if (data->device_flags & RMI_DEVICE_OUTPUT_SET_REPORT) { /* * Talk to device by using SET_REPORT requests instead. */ ret = hid_hw_raw_request(hdev, report[0], report, len, HID_OUTPUT_REPORT, HID_REQ_SET_REPORT); } else { ret = hid_hw_output_report(hdev, (void *)report, len); } if (ret < 0) { dev_err(&hdev->dev, "failed to write hid report (%d)\n", ret); return ret; } return ret; } static int rmi_hid_read_block(struct rmi_transport_dev *xport, u16 addr, void *buf, size_t len) { struct rmi_data *data = container_of(xport, struct rmi_data, xport); struct hid_device *hdev = data->hdev; int ret; int bytes_read; int bytes_needed; int retries; int read_input_count; mutex_lock(&data->page_mutex); if (RMI_PAGE(addr) != data->page) { ret = rmi_set_page(hdev, RMI_PAGE(addr)); if (ret < 0) goto exit; } for (retries = 5; retries > 0; retries--) { data->writeReport[0] = RMI_READ_ADDR_REPORT_ID; data->writeReport[1] = 0; /* old 1 byte read count */ data->writeReport[2] = addr & 0xFF; data->writeReport[3] = (addr >> 8) & 0xFF; data->writeReport[4] = len & 0xFF; data->writeReport[5] = (len >> 8) & 0xFF; set_bit(RMI_READ_REQUEST_PENDING, &data->flags); ret = rmi_write_report(hdev, data->writeReport, data->output_report_size); if (ret != data->output_report_size) { dev_err(&hdev->dev, "failed to write request output report (%d)\n", ret); goto exit; } bytes_read = 0; bytes_needed = len; while (bytes_read < len) { if (!wait_event_timeout(data->wait, test_bit(RMI_READ_DATA_PENDING, &data->flags), msecs_to_jiffies(1000))) { hid_warn(hdev, "%s: timeout elapsed\n", __func__); ret = -EAGAIN; break; } read_input_count = data->readReport[1]; memcpy(buf + bytes_read, &data->readReport[2], min(read_input_count, bytes_needed)); bytes_read += read_input_count; bytes_needed -= read_input_count; clear_bit(RMI_READ_DATA_PENDING, &data->flags); } if (ret >= 0) { ret = 0; break; } } exit: clear_bit(RMI_READ_REQUEST_PENDING, &data->flags); mutex_unlock(&data->page_mutex); return ret; } static int rmi_hid_write_block(struct rmi_transport_dev *xport, u16 addr, const void *buf, size_t len) { struct rmi_data *data = container_of(xport, struct rmi_data, xport); struct hid_device *hdev = data->hdev; int ret; mutex_lock(&data->page_mutex); if (RMI_PAGE(addr) != data->page) { ret = rmi_set_page(hdev, RMI_PAGE(addr)); if (ret < 0) goto exit; } data->writeReport[0] = RMI_WRITE_REPORT_ID; data->writeReport[1] = len; data->writeReport[2] = addr & 0xFF; data->writeReport[3] = (addr >> 8) & 0xFF; memcpy(&data->writeReport[4], buf, len); ret = rmi_write_report(hdev, data->writeReport, data->output_report_size); if (ret < 0) { dev_err(&hdev->dev, "failed to write request output report (%d)\n", ret); goto exit; } ret = 0; exit: mutex_unlock(&data->page_mutex); return ret; } static int rmi_reset_attn_mode(struct hid_device *hdev) { struct rmi_data *data = hid_get_drvdata(hdev); struct rmi_device *rmi_dev = data->xport.rmi_dev; int ret; ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS); if (ret) return ret; if (test_bit(RMI_STARTED, &data->flags)) ret = rmi_dev->driver->reset_handler(rmi_dev); return ret; } static void rmi_reset_work(struct work_struct *work) { struct rmi_data *hdata = container_of(work, struct rmi_data, reset_work); /* switch the device to RMI if we receive a generic mouse report */ rmi_reset_attn_mode(hdata->hdev); } static int rmi_input_event(struct hid_device *hdev, u8 *data, int size) { struct rmi_data *hdata = hid_get_drvdata(hdev); struct rmi_device *rmi_dev = hdata->xport.rmi_dev; unsigned long flags; if (!(test_bit(RMI_STARTED, &hdata->flags))) return 0; pm_wakeup_event(hdev->dev.parent, 0); local_irq_save(flags); rmi_set_attn_data(rmi_dev, data[1], &data[2], size - 2); generic_handle_irq(hdata->rmi_irq); local_irq_restore(flags); return 1; } static int rmi_read_data_event(struct hid_device *hdev, u8 *data, int size) { struct rmi_data *hdata = hid_get_drvdata(hdev); if (!test_bit(RMI_READ_REQUEST_PENDING, &hdata->flags)) { hid_dbg(hdev, "no read request pending\n"); return 0; } memcpy(hdata->readReport, data, min((u32)size, hdata->input_report_size)); set_bit(RMI_READ_DATA_PENDING, &hdata->flags); wake_up(&hdata->wait); return 1; } static int rmi_check_sanity(struct hid_device *hdev, u8 *data, int size) { int valid_size = size; /* * On the Dell XPS 13 9333, the bus sometimes get confused and fills * the report with a sentinel value "ff". Synaptics told us that such * behavior does not comes from the touchpad itself, so we filter out * such reports here. */ while ((data[valid_size - 1] == 0xff) && valid_size > 0) valid_size--; return valid_size; } static int rmi_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size) { struct rmi_data *hdata = hid_get_drvdata(hdev); if (!(hdata->device_flags & RMI_DEVICE)) return 0; size = rmi_check_sanity(hdev, data, size); if (size < 2) return 0; switch (data[0]) { case RMI_READ_DATA_REPORT_ID: return rmi_read_data_event(hdev, data, size); case RMI_ATTN_REPORT_ID: return rmi_input_event(hdev, data, size); default: return 1; } return 0; } static int rmi_event(struct hid_device *hdev, struct hid_field *field, struct hid_usage *usage, __s32 value) { struct rmi_data *data = hid_get_drvdata(hdev); if ((data->device_flags & RMI_DEVICE) && (field->application == HID_GD_POINTER || field->application == HID_GD_MOUSE)) { if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) { if ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON) return 0; if ((usage->hid == HID_GD_X || usage->hid == HID_GD_Y) && !value) return 1; } schedule_work(&data->reset_work); return 1; } return 0; } static void rmi_report(struct hid_device *hid, struct hid_report *report) { struct hid_field *field = report->field[0]; if (!(hid->claimed & HID_CLAIMED_INPUT)) return; switch (report->id) { case RMI_READ_DATA_REPORT_ID: case RMI_ATTN_REPORT_ID: return; } if (field && field->hidinput && field->hidinput->input) input_sync(field->hidinput->input); } #ifdef CONFIG_PM static int rmi_suspend(struct hid_device *hdev, pm_message_t message) { struct rmi_data *data = hid_get_drvdata(hdev); struct rmi_device *rmi_dev = data->xport.rmi_dev; int ret; if (!(data->device_flags & RMI_DEVICE)) return 0; ret = rmi_driver_suspend(rmi_dev, false); if (ret) { hid_warn(hdev, "Failed to suspend device: %d\n", ret); return ret; } return 0; } static int rmi_post_resume(struct hid_device *hdev) { struct rmi_data *data = hid_get_drvdata(hdev); struct rmi_device *rmi_dev = data->xport.rmi_dev; int ret; if (!(data->device_flags & RMI_DEVICE)) return 0; /* Make sure the HID device is ready to receive events */ ret = hid_hw_open(hdev); if (ret) return ret; ret = rmi_reset_attn_mode(hdev); if (ret) goto out; ret = rmi_driver_resume(rmi_dev, false); if (ret) { hid_warn(hdev, "Failed to resume device: %d\n", ret); goto out; } out: hid_hw_close(hdev); return ret; } #endif /* CONFIG_PM */ static int rmi_hid_reset(struct rmi_transport_dev *xport, u16 reset_addr) { struct rmi_data *data = container_of(xport, struct rmi_data, xport); struct hid_device *hdev = data->hdev; return rmi_reset_attn_mode(hdev); } static int rmi_input_configured(struct hid_device *hdev, struct hid_input *hi) { struct rmi_data *data = hid_get_drvdata(hdev); struct input_dev *input = hi->input; int ret = 0; if (!(data->device_flags & RMI_DEVICE)) return 0; data->xport.input = input; hid_dbg(hdev, "Opening low level driver\n"); ret = hid_hw_open(hdev); if (ret) return ret; /* Allow incoming hid reports */ hid_device_io_start(hdev); ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS); if (ret < 0) { dev_err(&hdev->dev, "failed to set rmi mode\n"); goto exit; } ret = rmi_set_page(hdev, 0); if (ret < 0) { dev_err(&hdev->dev, "failed to set page select to 0.\n"); goto exit; } ret = rmi_register_transport_device(&data->xport); if (ret < 0) { dev_err(&hdev->dev, "failed to register transport driver\n"); goto exit; } set_bit(RMI_STARTED, &data->flags); exit: hid_device_io_stop(hdev); hid_hw_close(hdev); return ret; } static int rmi_input_mapping(struct hid_device *hdev, struct hid_input *hi, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max) { struct rmi_data *data = hid_get_drvdata(hdev); /* * we want to make HID ignore the advertised HID collection * for RMI deivces */ if (data->device_flags & RMI_DEVICE) { if ((data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) && ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON)) return 0; return -1; } return 0; } static int rmi_check_valid_report_id(struct hid_device *hdev, unsigned type, unsigned id, struct hid_report **report) { int i; *report = hdev->report_enum[type].report_id_hash[id]; if (*report) { for (i = 0; i < (*report)->maxfield; i++) { unsigned app = (*report)->field[i]->application; if ((app & HID_USAGE_PAGE) >= HID_UP_MSVENDOR) return 1; } } return 0; } static struct rmi_device_platform_data rmi_hid_pdata = { .sensor_pdata = { .sensor_type = rmi_sensor_touchpad, .axis_align.flip_y = true, .dribble = RMI_REG_STATE_ON, .palm_detect = RMI_REG_STATE_OFF, }, }; static const struct rmi_transport_ops hid_rmi_ops = { .write_block = rmi_hid_write_block, .read_block = rmi_hid_read_block, .reset = rmi_hid_reset, }; static void rmi_irq_teardown(void *data) { struct rmi_data *hdata = data; struct irq_domain *domain = hdata->domain; if (!domain) return; irq_dispose_mapping(irq_find_mapping(domain, 0)); irq_domain_remove(domain); hdata->domain = NULL; hdata->rmi_irq = 0; } static int rmi_irq_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw_irq_num) { irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_simple_irq); return 0; } static const struct irq_domain_ops rmi_irq_ops = { .map = rmi_irq_map, }; static int rmi_setup_irq_domain(struct hid_device *hdev) { struct rmi_data *hdata = hid_get_drvdata(hdev); int ret; hdata->domain = irq_domain_create_linear(hdev->dev.fwnode, 1, &rmi_irq_ops, hdata); if (!hdata->domain) return -ENOMEM; ret = devm_add_action_or_reset(&hdev->dev, &rmi_irq_teardown, hdata); if (ret) return ret; hdata->rmi_irq = irq_create_mapping(hdata->domain, 0); if (hdata->rmi_irq <= 0) { hid_err(hdev, "Can't allocate an IRQ\n"); return hdata->rmi_irq < 0 ? hdata->rmi_irq : -ENXIO; } return 0; } static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id) { struct rmi_data *data = NULL; int ret; size_t alloc_size; struct hid_report *input_report; struct hid_report *output_report; struct hid_report *feature_report; data = devm_kzalloc(&hdev->dev, sizeof(struct rmi_data), GFP_KERNEL); if (!data) return -ENOMEM; INIT_WORK(&data->reset_work, rmi_reset_work); data->hdev = hdev; hid_set_drvdata(hdev, data); hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS; hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC; ret = hid_parse(hdev); if (ret) { hid_err(hdev, "parse failed\n"); return ret; } if (id->driver_data) data->device_flags = id->driver_data; /* * Check for the RMI specific report ids. If they are misisng * simply return and let the events be processed by hid-input */ if (!rmi_check_valid_report_id(hdev, HID_FEATURE_REPORT, RMI_SET_RMI_MODE_REPORT_ID, &feature_report)) { hid_dbg(hdev, "device does not have set mode feature report\n"); goto start; } if (!rmi_check_valid_report_id(hdev, HID_INPUT_REPORT, RMI_ATTN_REPORT_ID, &input_report)) { hid_dbg(hdev, "device does not have attention input report\n"); goto start; } data->input_report_size = hid_report_len(input_report); if (!rmi_check_valid_report_id(hdev, HID_OUTPUT_REPORT, RMI_WRITE_REPORT_ID, &output_report)) { hid_dbg(hdev, "device does not have rmi write output report\n"); goto start; } data->output_report_size = hid_report_len(output_report); data->device_flags |= RMI_DEVICE; alloc_size = data->output_report_size + data->input_report_size; data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL); if (!data->writeReport) { hid_err(hdev, "failed to allocate buffer for HID reports\n"); return -ENOMEM; } data->readReport = data->writeReport + data->output_report_size; init_waitqueue_head(&data->wait); mutex_init(&data->page_mutex); ret = rmi_setup_irq_domain(hdev); if (ret) { hid_err(hdev, "failed to allocate IRQ domain\n"); return ret; } if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) rmi_hid_pdata.gpio_data.disable = true; data->xport.dev = hdev->dev.parent; data->xport.pdata = rmi_hid_pdata; data->xport.pdata.irq = data->rmi_irq; data->xport.proto_name = "hid"; data->xport.ops = &hid_rmi_ops; start: ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); if (ret) { hid_err(hdev, "hw start failed\n"); return ret; } return 0; } static void rmi_remove(struct hid_device *hdev) { struct rmi_data *hdata = hid_get_drvdata(hdev); if ((hdata->device_flags & RMI_DEVICE) && test_bit(RMI_STARTED, &hdata->flags)) { clear_bit(RMI_STARTED, &hdata->flags); cancel_work_sync(&hdata->reset_work); rmi_unregister_transport_device(&hdata->xport); } hid_hw_stop(hdev); } static const struct hid_device_id rmi_id[] = { { HID_USB_DEVICE(USB_VENDOR_ID_RAZER, USB_DEVICE_ID_RAZER_BLADE_14), .driver_data = RMI_DEVICE_HAS_PHYS_BUTTONS }, { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_X1_COVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_REZEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5), .driver_data = RMI_DEVICE_OUTPUT_SET_REPORT }, { HID_DEVICE(HID_BUS_ANY, HID_GROUP_RMI, HID_ANY_ID, HID_ANY_ID) }, { } }; MODULE_DEVICE_TABLE(hid, rmi_id); static struct hid_driver rmi_driver = { .name = "hid-rmi", .id_table = rmi_id, .probe = rmi_probe, .remove = rmi_remove, .event = rmi_event, .raw_event = rmi_raw_event, .report = rmi_report, .input_mapping = rmi_input_mapping, .input_configured = rmi_input_configured, #ifdef CONFIG_PM .suspend = rmi_suspend, .resume = rmi_post_resume, .reset_resume = rmi_post_resume, #endif }; module_hid_driver(rmi_driver); MODULE_AUTHOR("Andrew Duggan <aduggan@synaptics.com>"); MODULE_DESCRIPTION("RMI HID driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1