Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Marcello Sylvester Bauer | 621 | 100.00% | 2 | 100.00% |
Total | 621 | 2 |
// SPDX-License-Identifier: GPL-2.0+ /* * Hardware monitoring driver for Vicor PLI1209BC Digital Supervisor * * Copyright (c) 2022 9elements GmbH */ #include <linux/i2c.h> #include <linux/module.h> #include <linux/pmbus.h> #include <linux/regulator/driver.h> #include "pmbus.h" /* * The capability command is only supported at page 0. Probing the device while * the page register is set to 1 will falsely enable PEC support. Disable * capability probing accordingly, since the PLI1209BC does not have any * additional capabilities. */ static struct pmbus_platform_data pli1209bc_plat_data = { .flags = PMBUS_NO_CAPABILITY, }; static int pli1209bc_read_word_data(struct i2c_client *client, int page, int phase, int reg) { int data; switch (reg) { /* PMBUS_READ_POUT uses a direct format with R=0 */ case PMBUS_READ_POUT: data = pmbus_read_word_data(client, page, phase, reg); if (data < 0) return data; data = sign_extend32(data, 15) * 10; return clamp_val(data, -32768, 32767) & 0xffff; /* * PMBUS_READ_VOUT and PMBUS_READ_TEMPERATURE_1 return invalid data * when the BCM is turned off. Since it is not possible to return * ENODATA error, return zero instead. */ case PMBUS_READ_VOUT: case PMBUS_READ_TEMPERATURE_1: data = pmbus_read_word_data(client, page, phase, PMBUS_STATUS_WORD); if (data < 0) return data; if (data & PB_STATUS_POWER_GOOD_N) return 0; return pmbus_read_word_data(client, page, phase, reg); default: return -ENODATA; } } #if IS_ENABLED(CONFIG_SENSORS_PLI1209BC_REGULATOR) static const struct regulator_desc pli1209bc_reg_desc = { .name = "vout2", .id = 1, .of_match = of_match_ptr("vout2"), .regulators_node = of_match_ptr("regulators"), .ops = &pmbus_regulator_ops, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, }; #endif static struct pmbus_driver_info pli1209bc_info = { .pages = 2, .format[PSC_VOLTAGE_IN] = direct, .format[PSC_VOLTAGE_OUT] = direct, .format[PSC_CURRENT_IN] = direct, .format[PSC_CURRENT_OUT] = direct, .format[PSC_POWER] = direct, .format[PSC_TEMPERATURE] = direct, .m[PSC_VOLTAGE_IN] = 1, .b[PSC_VOLTAGE_IN] = 0, .R[PSC_VOLTAGE_IN] = 1, .m[PSC_VOLTAGE_OUT] = 1, .b[PSC_VOLTAGE_OUT] = 0, .R[PSC_VOLTAGE_OUT] = 1, .m[PSC_CURRENT_IN] = 1, .b[PSC_CURRENT_IN] = 0, .R[PSC_CURRENT_IN] = 3, .m[PSC_CURRENT_OUT] = 1, .b[PSC_CURRENT_OUT] = 0, .R[PSC_CURRENT_OUT] = 2, .m[PSC_POWER] = 1, .b[PSC_POWER] = 0, .R[PSC_POWER] = 1, .m[PSC_TEMPERATURE] = 1, .b[PSC_TEMPERATURE] = 0, .R[PSC_TEMPERATURE] = 0, /* * Page 0 sums up all attributes except voltage readings. * The pli1209 digital supervisor only contains a single BCM, making * page 0 redundant. */ .func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT, .read_word_data = pli1209bc_read_word_data, #if IS_ENABLED(CONFIG_SENSORS_PLI1209BC_REGULATOR) .num_regulators = 1, .reg_desc = &pli1209bc_reg_desc, #endif }; static int pli1209bc_probe(struct i2c_client *client) { client->dev.platform_data = &pli1209bc_plat_data; return pmbus_do_probe(client, &pli1209bc_info); } static const struct i2c_device_id pli1209bc_id[] = { {"pli1209bc", 0}, {} }; MODULE_DEVICE_TABLE(i2c, pli1209bc_id); #ifdef CONFIG_OF static const struct of_device_id pli1209bc_of_match[] = { { .compatible = "vicor,pli1209bc" }, { }, }; MODULE_DEVICE_TABLE(of, pli1209bc_of_match); #endif static struct i2c_driver pli1209bc_driver = { .driver = { .name = "pli1209bc", .of_match_table = of_match_ptr(pli1209bc_of_match), }, .probe_new = pli1209bc_probe, .id_table = pli1209bc_id, }; module_i2c_driver(pli1209bc_driver); MODULE_AUTHOR("Marcello Sylvester Bauer <sylv@sylv.io>"); MODULE_DESCRIPTION("PMBus driver for Vicor PLI1209BC"); MODULE_LICENSE("GPL"); MODULE_IMPORT_NS(PMBUS);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1