Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Denis Ciocca | 1765 | 59.31% | 13 | 25.49% |
Linus Walleij | 572 | 19.22% | 8 | 15.69% |
Andy Shevchenko | 234 | 7.86% | 3 | 5.88% |
Giuseppe Barba | 212 | 7.12% | 3 | 5.88% |
Lorenzo Bianconi | 74 | 2.49% | 7 | 13.73% |
Jonathan Cameron | 41 | 1.38% | 3 | 5.88% |
Martin Kelly | 24 | 0.81% | 3 | 5.88% |
Alexandru Ardelean | 20 | 0.67% | 3 | 5.88% |
Robert Jones | 9 | 0.30% | 1 | 1.96% |
Gaëtan André | 7 | 0.24% | 1 | 1.96% |
LI Qingwu | 6 | 0.20% | 1 | 1.96% |
Miquel Raynal | 5 | 0.17% | 2 | 3.92% |
Lee Jones | 3 | 0.10% | 1 | 1.96% |
Grégor Boirie | 2 | 0.07% | 1 | 1.96% |
Thomas Gleixner | 2 | 0.07% | 1 | 1.96% |
Total | 2976 | 51 |
// SPDX-License-Identifier: GPL-2.0-only /* * STMicroelectronics magnetometers driver * * Copyright 2012-2013 STMicroelectronics Inc. * * Denis Ciocca <denis.ciocca@st.com> */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/mutex.h> #include <linux/sysfs.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> #include <linux/iio/trigger.h> #include <linux/iio/common/st_sensors.h> #include "st_magn.h" #define ST_MAGN_NUMBER_DATA_CHANNELS 3 /* DEFAULT VALUE FOR SENSORS */ #define ST_MAGN_DEFAULT_OUT_X_H_ADDR 0x03 #define ST_MAGN_DEFAULT_OUT_Y_H_ADDR 0x07 #define ST_MAGN_DEFAULT_OUT_Z_H_ADDR 0x05 /* FULLSCALE */ #define ST_MAGN_FS_AVL_1300MG 1300 #define ST_MAGN_FS_AVL_1900MG 1900 #define ST_MAGN_FS_AVL_2000MG 2000 #define ST_MAGN_FS_AVL_2500MG 2500 #define ST_MAGN_FS_AVL_4000MG 4000 #define ST_MAGN_FS_AVL_4700MG 4700 #define ST_MAGN_FS_AVL_5600MG 5600 #define ST_MAGN_FS_AVL_8000MG 8000 #define ST_MAGN_FS_AVL_8100MG 8100 #define ST_MAGN_FS_AVL_12000MG 12000 #define ST_MAGN_FS_AVL_15000MG 15000 #define ST_MAGN_FS_AVL_16000MG 16000 /* Special L addresses for Sensor 2 */ #define ST_MAGN_2_OUT_X_L_ADDR 0x28 #define ST_MAGN_2_OUT_Y_L_ADDR 0x2a #define ST_MAGN_2_OUT_Z_L_ADDR 0x2c /* Special L addresses for sensor 3 */ #define ST_MAGN_3_OUT_X_L_ADDR 0x68 #define ST_MAGN_3_OUT_Y_L_ADDR 0x6a #define ST_MAGN_3_OUT_Z_L_ADDR 0x6c /* Special L addresses for sensor 4 */ #define ST_MAGN_4_OUT_X_L_ADDR 0x08 #define ST_MAGN_4_OUT_Y_L_ADDR 0x0a #define ST_MAGN_4_OUT_Z_L_ADDR 0x0c static const struct iio_mount_matrix * st_magn_get_mount_matrix(const struct iio_dev *indio_dev, const struct iio_chan_spec *chan) { struct st_sensor_data *mdata = iio_priv(indio_dev); return &mdata->mount_matrix; } static const struct iio_chan_spec_ext_info st_magn_mount_matrix_ext_info[] = { IIO_MOUNT_MATRIX(IIO_SHARED_BY_ALL, st_magn_get_mount_matrix), { } }; static const struct iio_chan_spec st_magn_16bit_channels[] = { ST_SENSORS_LSM_CHANNELS_EXT(IIO_MAGN, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_BE, 16, 16, ST_MAGN_DEFAULT_OUT_X_H_ADDR, st_magn_mount_matrix_ext_info), ST_SENSORS_LSM_CHANNELS_EXT(IIO_MAGN, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_BE, 16, 16, ST_MAGN_DEFAULT_OUT_Y_H_ADDR, st_magn_mount_matrix_ext_info), ST_SENSORS_LSM_CHANNELS_EXT(IIO_MAGN, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_BE, 16, 16, ST_MAGN_DEFAULT_OUT_Z_H_ADDR, st_magn_mount_matrix_ext_info), IIO_CHAN_SOFT_TIMESTAMP(3) }; static const struct iio_chan_spec st_magn_2_16bit_channels[] = { ST_SENSORS_LSM_CHANNELS_EXT(IIO_MAGN, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16, ST_MAGN_2_OUT_X_L_ADDR, st_magn_mount_matrix_ext_info), ST_SENSORS_LSM_CHANNELS_EXT(IIO_MAGN, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16, ST_MAGN_2_OUT_Y_L_ADDR, st_magn_mount_matrix_ext_info), ST_SENSORS_LSM_CHANNELS_EXT(IIO_MAGN, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16, ST_MAGN_2_OUT_Z_L_ADDR, st_magn_mount_matrix_ext_info), IIO_CHAN_SOFT_TIMESTAMP(3) }; static const struct iio_chan_spec st_magn_3_16bit_channels[] = { ST_SENSORS_LSM_CHANNELS_EXT(IIO_MAGN, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16, ST_MAGN_3_OUT_X_L_ADDR, st_magn_mount_matrix_ext_info), ST_SENSORS_LSM_CHANNELS_EXT(IIO_MAGN, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16, ST_MAGN_3_OUT_Y_L_ADDR, st_magn_mount_matrix_ext_info), ST_SENSORS_LSM_CHANNELS_EXT(IIO_MAGN, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16, ST_MAGN_3_OUT_Z_L_ADDR, st_magn_mount_matrix_ext_info), IIO_CHAN_SOFT_TIMESTAMP(3) }; static const struct iio_chan_spec st_magn_4_16bit_channels[] = { ST_SENSORS_LSM_CHANNELS(IIO_MAGN, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16, ST_MAGN_4_OUT_X_L_ADDR), ST_SENSORS_LSM_CHANNELS(IIO_MAGN, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16, ST_MAGN_4_OUT_Y_L_ADDR), ST_SENSORS_LSM_CHANNELS(IIO_MAGN, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16, ST_MAGN_4_OUT_Z_L_ADDR), IIO_CHAN_SOFT_TIMESTAMP(3) }; static const struct st_sensor_settings st_magn_sensors_settings[] = { { .wai = 0, /* This sensor has no valid WhoAmI report 0 */ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, .sensors_supported = { [0] = LSM303DLH_MAGN_DEV_NAME, }, .ch = (struct iio_chan_spec *)st_magn_16bit_channels, .odr = { .addr = 0x00, .mask = 0x1c, .odr_avl = { { .hz = 1, .value = 0x00 }, { .hz = 2, .value = 0x01 }, { .hz = 3, .value = 0x02 }, { .hz = 8, .value = 0x03 }, { .hz = 15, .value = 0x04 }, { .hz = 30, .value = 0x05 }, { .hz = 75, .value = 0x06 }, /* 220 Hz, 0x07 reportedly exist */ }, }, .pw = { .addr = 0x02, .mask = 0x03, .value_on = 0x00, .value_off = 0x03, }, .fs = { .addr = 0x01, .mask = 0xe0, .fs_avl = { [0] = { .num = ST_MAGN_FS_AVL_1300MG, .value = 0x01, .gain = 1100, .gain2 = 980, }, [1] = { .num = ST_MAGN_FS_AVL_1900MG, .value = 0x02, .gain = 855, .gain2 = 760, }, [2] = { .num = ST_MAGN_FS_AVL_2500MG, .value = 0x03, .gain = 670, .gain2 = 600, }, [3] = { .num = ST_MAGN_FS_AVL_4000MG, .value = 0x04, .gain = 450, .gain2 = 400, }, [4] = { .num = ST_MAGN_FS_AVL_4700MG, .value = 0x05, .gain = 400, .gain2 = 355, }, [5] = { .num = ST_MAGN_FS_AVL_5600MG, .value = 0x06, .gain = 330, .gain2 = 295, }, [6] = { .num = ST_MAGN_FS_AVL_8100MG, .value = 0x07, .gain = 230, .gain2 = 205, }, }, }, .multi_read_bit = false, .bootime = 2, }, { .wai = 0x3c, .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, .sensors_supported = { [0] = LSM303DLHC_MAGN_DEV_NAME, [1] = LSM303DLM_MAGN_DEV_NAME, }, .ch = (struct iio_chan_spec *)st_magn_16bit_channels, .odr = { .addr = 0x00, .mask = 0x1c, .odr_avl = { { .hz = 1, .value = 0x00 }, { .hz = 2, .value = 0x01 }, { .hz = 3, .value = 0x02 }, { .hz = 8, .value = 0x03 }, { .hz = 15, .value = 0x04 }, { .hz = 30, .value = 0x05 }, { .hz = 75, .value = 0x06 }, { .hz = 220, .value = 0x07 }, }, }, .pw = { .addr = 0x02, .mask = 0x03, .value_on = 0x00, .value_off = 0x03, }, .fs = { .addr = 0x01, .mask = 0xe0, .fs_avl = { [0] = { .num = ST_MAGN_FS_AVL_1300MG, .value = 0x01, .gain = 909, .gain2 = 1020, }, [1] = { .num = ST_MAGN_FS_AVL_1900MG, .value = 0x02, .gain = 1169, .gain2 = 1315, }, [2] = { .num = ST_MAGN_FS_AVL_2500MG, .value = 0x03, .gain = 1492, .gain2 = 1666, }, [3] = { .num = ST_MAGN_FS_AVL_4000MG, .value = 0x04, .gain = 2222, .gain2 = 2500, }, [4] = { .num = ST_MAGN_FS_AVL_4700MG, .value = 0x05, .gain = 2500, .gain2 = 2816, }, [5] = { .num = ST_MAGN_FS_AVL_5600MG, .value = 0x06, .gain = 3030, .gain2 = 3389, }, [6] = { .num = ST_MAGN_FS_AVL_8100MG, .value = 0x07, .gain = 4347, .gain2 = 4878, }, }, }, .multi_read_bit = false, .bootime = 2, }, { .wai = 0x3d, .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, .sensors_supported = { [0] = LIS3MDL_MAGN_DEV_NAME, [1] = LSM9DS1_MAGN_DEV_NAME, }, .ch = (struct iio_chan_spec *)st_magn_2_16bit_channels, .odr = { .addr = 0x20, .mask = 0x1c, .odr_avl = { { .hz = 1, .value = 0x00 }, { .hz = 2, .value = 0x01 }, { .hz = 3, .value = 0x02 }, { .hz = 5, .value = 0x03 }, { .hz = 10, .value = 0x04 }, { .hz = 20, .value = 0x05 }, { .hz = 40, .value = 0x06 }, { .hz = 80, .value = 0x07 }, }, }, .pw = { .addr = 0x22, .mask = 0x03, .value_on = 0x00, .value_off = 0x03, }, .fs = { .addr = 0x21, .mask = 0x60, .fs_avl = { [0] = { .num = ST_MAGN_FS_AVL_4000MG, .value = 0x00, .gain = 146, }, [1] = { .num = ST_MAGN_FS_AVL_8000MG, .value = 0x01, .gain = 292, }, [2] = { .num = ST_MAGN_FS_AVL_12000MG, .value = 0x02, .gain = 438, }, [3] = { .num = ST_MAGN_FS_AVL_16000MG, .value = 0x03, .gain = 584, }, }, }, .bdu = { .addr = 0x24, .mask = 0x40, }, .drdy_irq = { /* drdy line is routed drdy pin */ .stat_drdy = { .addr = ST_SENSORS_DEFAULT_STAT_ADDR, .mask = 0x07, }, }, .sim = { .addr = 0x22, .value = BIT(2), }, .multi_read_bit = true, .bootime = 2, }, { .wai = 0x40, .wai_addr = 0x4f, .sensors_supported = { [0] = LSM303AGR_MAGN_DEV_NAME, [1] = LIS2MDL_MAGN_DEV_NAME, [2] = IIS2MDC_MAGN_DEV_NAME, }, .ch = (struct iio_chan_spec *)st_magn_3_16bit_channels, .odr = { .addr = 0x60, .mask = 0x0c, .odr_avl = { { .hz = 10, .value = 0x00 }, { .hz = 20, .value = 0x01 }, { .hz = 50, .value = 0x02 }, { .hz = 100, .value = 0x03 }, }, }, .pw = { .addr = 0x60, .mask = 0x03, .value_on = 0x00, .value_off = 0x03, }, .fs = { .fs_avl = { [0] = { .num = ST_MAGN_FS_AVL_15000MG, .gain = 1500, }, }, }, .bdu = { .addr = 0x62, .mask = 0x10, }, .drdy_irq = { .int1 = { .addr = 0x62, .mask = 0x01, }, .stat_drdy = { .addr = 0x67, .mask = 0x07, }, }, .multi_read_bit = false, .bootime = 2, }, { .wai = 0x49, .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, .sensors_supported = { [0] = LSM9DS0_IMU_DEV_NAME, }, .ch = (struct iio_chan_spec *)st_magn_4_16bit_channels, .odr = { .addr = 0x24, .mask = GENMASK(4, 2), .odr_avl = { { 3, 0x00, }, { 6, 0x01, }, { 12, 0x02, }, { 25, 0x03, }, { 50, 0x04, }, { 100, 0x05, }, }, }, .pw = { .addr = 0x26, .mask = GENMASK(1, 0), .value_on = 0x00, .value_off = 0x03, }, .fs = { .addr = 0x25, .mask = GENMASK(6, 5), .fs_avl = { [0] = { .num = ST_MAGN_FS_AVL_2000MG, .value = 0x00, .gain = 73, }, [1] = { .num = ST_MAGN_FS_AVL_4000MG, .value = 0x01, .gain = 146, }, [2] = { .num = ST_MAGN_FS_AVL_8000MG, .value = 0x02, .gain = 292, }, [3] = { .num = ST_MAGN_FS_AVL_12000MG, .value = 0x03, .gain = 438, }, }, }, .bdu = { .addr = 0x20, .mask = BIT(3), }, .drdy_irq = { .int1 = { .addr = 0x22, .mask = BIT(1), }, .int2 = { .addr = 0x23, .mask = BIT(2), }, .stat_drdy = { .addr = 0x07, .mask = GENMASK(2, 0), }, }, .sim = { .addr = 0x21, .value = BIT(0), }, .multi_read_bit = true, .bootime = 2, }, }; /* Default magn DRDY is available on INT2 pin */ static const struct st_sensors_platform_data default_magn_pdata = { .drdy_int_pin = 2, }; static int st_magn_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *ch, int *val, int *val2, long mask) { int err; struct st_sensor_data *mdata = iio_priv(indio_dev); switch (mask) { case IIO_CHAN_INFO_RAW: err = st_sensors_read_info_raw(indio_dev, ch, val); if (err < 0) goto read_error; return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: *val = 0; if ((ch->scan_index == ST_SENSORS_SCAN_Z) && (mdata->current_fullscale->gain2 != 0)) *val2 = mdata->current_fullscale->gain2; else *val2 = mdata->current_fullscale->gain; return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_SAMP_FREQ: *val = mdata->odr; return IIO_VAL_INT; default: return -EINVAL; } read_error: return err; } static int st_magn_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int val, int val2, long mask) { switch (mask) { case IIO_CHAN_INFO_SCALE: return st_sensors_set_fullscale_by_gain(indio_dev, val2); case IIO_CHAN_INFO_SAMP_FREQ: if (val2) return -EINVAL; return st_sensors_set_odr(indio_dev, val); default: return -EINVAL; } } static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL(); static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_magn_scale_available); static struct attribute *st_magn_attributes[] = { &iio_dev_attr_sampling_frequency_available.dev_attr.attr, &iio_dev_attr_in_magn_scale_available.dev_attr.attr, NULL, }; static const struct attribute_group st_magn_attribute_group = { .attrs = st_magn_attributes, }; static const struct iio_info magn_info = { .attrs = &st_magn_attribute_group, .read_raw = &st_magn_read_raw, .write_raw = &st_magn_write_raw, .debugfs_reg_access = &st_sensors_debugfs_reg_access, }; #ifdef CONFIG_IIO_TRIGGER static const struct iio_trigger_ops st_magn_trigger_ops = { .set_trigger_state = ST_MAGN_TRIGGER_SET_STATE, .validate_device = st_sensors_validate_device, }; #define ST_MAGN_TRIGGER_OPS (&st_magn_trigger_ops) #else #define ST_MAGN_TRIGGER_OPS NULL #endif /* * st_magn_get_settings() - get sensor settings from device name * @name: device name buffer reference. * * Return: valid reference on success, NULL otherwise. */ const struct st_sensor_settings *st_magn_get_settings(const char *name) { int index = st_sensors_get_settings_index(name, st_magn_sensors_settings, ARRAY_SIZE(st_magn_sensors_settings)); if (index < 0) return NULL; return &st_magn_sensors_settings[index]; } EXPORT_SYMBOL_NS(st_magn_get_settings, IIO_ST_SENSORS); int st_magn_common_probe(struct iio_dev *indio_dev) { struct st_sensor_data *mdata = iio_priv(indio_dev); struct device *parent = indio_dev->dev.parent; struct st_sensors_platform_data *pdata = dev_get_platdata(parent); int err; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &magn_info; err = st_sensors_verify_id(indio_dev); if (err < 0) return err; mdata->num_data_channels = ST_MAGN_NUMBER_DATA_CHANNELS; indio_dev->channels = mdata->sensor_settings->ch; indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS; err = iio_read_mount_matrix(parent, &mdata->mount_matrix); if (err) return err; mdata->current_fullscale = &mdata->sensor_settings->fs.fs_avl[0]; mdata->odr = mdata->sensor_settings->odr.odr_avl[0].hz; if (!pdata) pdata = (struct st_sensors_platform_data *)&default_magn_pdata; err = st_sensors_init_sensor(indio_dev, pdata); if (err < 0) return err; err = st_magn_allocate_ring(indio_dev); if (err < 0) return err; if (mdata->irq > 0) { err = st_sensors_allocate_trigger(indio_dev, ST_MAGN_TRIGGER_OPS); if (err < 0) return err; } return devm_iio_device_register(parent, indio_dev); } EXPORT_SYMBOL_NS(st_magn_common_probe, IIO_ST_SENSORS); MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); MODULE_DESCRIPTION("STMicroelectronics magnetometers driver"); MODULE_LICENSE("GPL v2"); MODULE_IMPORT_NS(IIO_ST_SENSORS);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1