Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Tomislav Denis | 1484 | 99.13% | 1 | 25.00% |
Uwe Kleine-König | 9 | 0.60% | 1 | 25.00% |
Andy Shevchenko | 3 | 0.20% | 1 | 25.00% |
Alexander A. Klimov | 1 | 0.07% | 1 | 25.00% |
Total | 1497 | 4 |
// SPDX-License-Identifier: GPL-2.0 /* * All Sensors DLH series low voltage digital pressure sensors * * Copyright (c) 2019 AVL DiTEST GmbH * Tomislav Denis <tomislav.denis@avl.com> * * Datasheet: https://www.allsensors.com/cad/DS-0355_Rev_B.PDF */ #include <linux/module.h> #include <linux/delay.h> #include <linux/i2c.h> #include <linux/iio/iio.h> #include <linux/iio/buffer.h> #include <linux/iio/trigger_consumer.h> #include <linux/iio/triggered_buffer.h> #include <asm/unaligned.h> /* Commands */ #define DLH_START_SINGLE 0xAA /* Status bits */ #define DLH_STATUS_OK 0x40 /* DLH data format */ #define DLH_NUM_READ_BYTES 7 #define DLH_NUM_DATA_BYTES 3 #define DLH_NUM_PR_BITS 24 #define DLH_NUM_TEMP_BITS 24 /* DLH timings */ #define DLH_SINGLE_DUT_MS 5 enum dhl_ids { dlhl60d, dlhl60g, }; struct dlh_info { u8 osdig; /* digital offset factor */ unsigned int fss; /* full scale span (inch H2O) */ }; struct dlh_state { struct i2c_client *client; struct dlh_info info; bool use_interrupt; struct completion completion; u8 rx_buf[DLH_NUM_READ_BYTES]; }; static struct dlh_info dlh_info_tbl[] = { [dlhl60d] = { .osdig = 2, .fss = 120, }, [dlhl60g] = { .osdig = 10, .fss = 60, }, }; static int dlh_cmd_start_single(struct dlh_state *st) { int ret; ret = i2c_smbus_write_byte(st->client, DLH_START_SINGLE); if (ret) dev_err(&st->client->dev, "%s: I2C write byte failed\n", __func__); return ret; } static int dlh_cmd_read_data(struct dlh_state *st) { int ret; ret = i2c_master_recv(st->client, st->rx_buf, DLH_NUM_READ_BYTES); if (ret < 0) { dev_err(&st->client->dev, "%s: I2C read block failed\n", __func__); return ret; } if (st->rx_buf[0] != DLH_STATUS_OK) { dev_err(&st->client->dev, "%s: invalid status 0x%02x\n", __func__, st->rx_buf[0]); return -EBUSY; } return 0; } static int dlh_start_capture_and_read(struct dlh_state *st) { int ret; if (st->use_interrupt) reinit_completion(&st->completion); ret = dlh_cmd_start_single(st); if (ret) return ret; if (st->use_interrupt) { ret = wait_for_completion_timeout(&st->completion, msecs_to_jiffies(DLH_SINGLE_DUT_MS)); if (!ret) { dev_err(&st->client->dev, "%s: conversion timed out\n", __func__); return -ETIMEDOUT; } } else { mdelay(DLH_SINGLE_DUT_MS); } return dlh_cmd_read_data(st); } static int dlh_read_direct(struct dlh_state *st, unsigned int *pressure, unsigned int *temperature) { int ret; ret = dlh_start_capture_and_read(st); if (ret) return ret; *pressure = get_unaligned_be24(&st->rx_buf[1]); *temperature = get_unaligned_be24(&st->rx_buf[4]); return 0; } static int dlh_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *channel, int *value, int *value2, long mask) { struct dlh_state *st = iio_priv(indio_dev); unsigned int pressure, temperature; int ret; s64 tmp; s32 rem; switch (mask) { case IIO_CHAN_INFO_RAW: ret = iio_device_claim_direct_mode(indio_dev); if (ret) return ret; ret = dlh_read_direct(st, &pressure, &temperature); iio_device_release_direct_mode(indio_dev); if (ret) return ret; switch (channel->type) { case IIO_PRESSURE: *value = pressure; return IIO_VAL_INT; case IIO_TEMP: *value = temperature; return IIO_VAL_INT; default: return -EINVAL; } case IIO_CHAN_INFO_SCALE: switch (channel->type) { case IIO_PRESSURE: tmp = div_s64(125LL * st->info.fss * 24909 * 100, 1 << DLH_NUM_PR_BITS); tmp = div_s64_rem(tmp, 1000000000LL, &rem); *value = tmp; *value2 = rem; return IIO_VAL_INT_PLUS_NANO; case IIO_TEMP: *value = 125 * 1000; *value2 = DLH_NUM_TEMP_BITS; return IIO_VAL_FRACTIONAL_LOG2; default: return -EINVAL; } case IIO_CHAN_INFO_OFFSET: switch (channel->type) { case IIO_PRESSURE: *value = -125 * st->info.fss * 24909; *value2 = 100 * st->info.osdig * 100000; return IIO_VAL_FRACTIONAL; case IIO_TEMP: *value = -40 * 1000; return IIO_VAL_INT; default: return -EINVAL; } } return -EINVAL; } static const struct iio_info dlh_info = { .read_raw = dlh_read_raw, }; static const struct iio_chan_spec dlh_channels[] = { { .type = IIO_PRESSURE, .indexed = 1, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET), .scan_index = 0, .scan_type = { .sign = 'u', .realbits = DLH_NUM_PR_BITS, .storagebits = 32, .shift = 8, .endianness = IIO_BE, }, }, { .type = IIO_TEMP, .indexed = 1, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET), .scan_index = 1, .scan_type = { .sign = 'u', .realbits = DLH_NUM_TEMP_BITS, .storagebits = 32, .shift = 8, .endianness = IIO_BE, }, } }; static irqreturn_t dlh_trigger_handler(int irq, void *private) { struct iio_poll_func *pf = private; struct iio_dev *indio_dev = pf->indio_dev; struct dlh_state *st = iio_priv(indio_dev); int ret; unsigned int chn, i = 0; __be32 tmp_buf[2]; ret = dlh_start_capture_and_read(st); if (ret) goto out; for_each_set_bit(chn, indio_dev->active_scan_mask, indio_dev->masklength) { memcpy(tmp_buf + i, &st->rx_buf[1] + chn * DLH_NUM_DATA_BYTES, DLH_NUM_DATA_BYTES); i++; } iio_push_to_buffers(indio_dev, tmp_buf); out: iio_trigger_notify_done(indio_dev->trig); return IRQ_HANDLED; } static irqreturn_t dlh_interrupt(int irq, void *private) { struct iio_dev *indio_dev = private; struct dlh_state *st = iio_priv(indio_dev); complete(&st->completion); return IRQ_HANDLED; }; static int dlh_probe(struct i2c_client *client) { const struct i2c_device_id *id = i2c_client_get_device_id(client); struct dlh_state *st; struct iio_dev *indio_dev; int ret; if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE)) { dev_err(&client->dev, "adapter doesn't support required i2c functionality\n"); return -EOPNOTSUPP; } indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st)); if (!indio_dev) { dev_err(&client->dev, "failed to allocate iio device\n"); return -ENOMEM; } i2c_set_clientdata(client, indio_dev); st = iio_priv(indio_dev); st->info = dlh_info_tbl[id->driver_data]; st->client = client; st->use_interrupt = false; indio_dev->name = id->name; indio_dev->info = &dlh_info; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = dlh_channels; indio_dev->num_channels = ARRAY_SIZE(dlh_channels); if (client->irq > 0) { ret = devm_request_threaded_irq(&client->dev, client->irq, dlh_interrupt, NULL, IRQF_TRIGGER_RISING | IRQF_ONESHOT, id->name, indio_dev); if (ret) { dev_err(&client->dev, "failed to allocate threaded irq"); return ret; } st->use_interrupt = true; init_completion(&st->completion); } ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev, NULL, &dlh_trigger_handler, NULL); if (ret) { dev_err(&client->dev, "failed to setup iio buffer\n"); return ret; } ret = devm_iio_device_register(&client->dev, indio_dev); if (ret) dev_err(&client->dev, "failed to register iio device\n"); return ret; } static const struct of_device_id dlh_of_match[] = { { .compatible = "asc,dlhl60d" }, { .compatible = "asc,dlhl60g" }, {} }; MODULE_DEVICE_TABLE(of, dlh_of_match); static const struct i2c_device_id dlh_id[] = { { "dlhl60d", dlhl60d }, { "dlhl60g", dlhl60g }, {} }; MODULE_DEVICE_TABLE(i2c, dlh_id); static struct i2c_driver dlh_driver = { .driver = { .name = "dlhl60d", .of_match_table = dlh_of_match, }, .probe_new = dlh_probe, .id_table = dlh_id, }; module_i2c_driver(dlh_driver); MODULE_AUTHOR("Tomislav Denis <tomislav.denis@avl.com>"); MODULE_DESCRIPTION("Driver for All Sensors DLH series pressure sensors"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1