Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Alexandre Belloni | 740 | 47.25% | 1 | 6.25% |
Michael Walle | 382 | 24.39% | 5 | 31.25% |
Colin Foster | 381 | 24.33% | 4 | 25.00% |
Antoine Tenart | 41 | 2.62% | 3 | 18.75% |
Horatiu Vultur | 11 | 0.70% | 1 | 6.25% |
Calvin Johnson | 8 | 0.51% | 1 | 6.25% |
Yang Yingliang | 3 | 0.19% | 1 | 6.25% |
Total | 1566 | 16 |
// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Driver for the MDIO interface of Microsemi network switches. * * Author: Alexandre Belloni <alexandre.belloni@bootlin.com> * Copyright (c) 2017 Microsemi Corporation */ #include <linux/bitops.h> #include <linux/clk.h> #include <linux/io.h> #include <linux/iopoll.h> #include <linux/kernel.h> #include <linux/mdio/mdio-mscc-miim.h> #include <linux/mfd/ocelot.h> #include <linux/module.h> #include <linux/of_mdio.h> #include <linux/phy.h> #include <linux/platform_device.h> #include <linux/property.h> #include <linux/regmap.h> #define MSCC_MIIM_REG_STATUS 0x0 #define MSCC_MIIM_STATUS_STAT_PENDING BIT(2) #define MSCC_MIIM_STATUS_STAT_BUSY BIT(3) #define MSCC_MIIM_REG_CMD 0x8 #define MSCC_MIIM_CMD_OPR_WRITE BIT(1) #define MSCC_MIIM_CMD_OPR_READ BIT(2) #define MSCC_MIIM_CMD_WRDATA_SHIFT 4 #define MSCC_MIIM_CMD_REGAD_SHIFT 20 #define MSCC_MIIM_CMD_PHYAD_SHIFT 25 #define MSCC_MIIM_CMD_VLD BIT(31) #define MSCC_MIIM_REG_DATA 0xC #define MSCC_MIIM_DATA_ERROR (BIT(16) | BIT(17)) #define MSCC_MIIM_REG_CFG 0x10 #define MSCC_MIIM_CFG_PRESCALE_MASK GENMASK(7, 0) #define MSCC_PHY_REG_PHY_CFG 0x0 #define PHY_CFG_PHY_ENA (BIT(0) | BIT(1) | BIT(2) | BIT(3)) #define PHY_CFG_PHY_COMMON_RESET BIT(4) #define PHY_CFG_PHY_RESET (BIT(5) | BIT(6) | BIT(7) | BIT(8)) #define MSCC_PHY_REG_PHY_STATUS 0x4 #define LAN966X_CUPHY_COMMON_CFG 0x0 #define CUPHY_COMMON_CFG_RESET_N BIT(0) struct mscc_miim_info { unsigned int phy_reset_offset; unsigned int phy_reset_bits; }; struct mscc_miim_dev { struct regmap *regs; int mii_status_offset; struct regmap *phy_regs; const struct mscc_miim_info *info; struct clk *clk; u32 bus_freq; }; /* When high resolution timers aren't built-in: we can't use usleep_range() as * we would sleep way too long. Use udelay() instead. */ #define mscc_readx_poll_timeout(op, addr, val, cond, delay_us, timeout_us)\ ({ \ if (!IS_ENABLED(CONFIG_HIGH_RES_TIMERS)) \ readx_poll_timeout_atomic(op, addr, val, cond, delay_us, \ timeout_us); \ readx_poll_timeout(op, addr, val, cond, delay_us, timeout_us); \ }) static int mscc_miim_status(struct mii_bus *bus) { struct mscc_miim_dev *miim = bus->priv; int val, ret; ret = regmap_read(miim->regs, MSCC_MIIM_REG_STATUS + miim->mii_status_offset, &val); if (ret < 0) { WARN_ONCE(1, "mscc miim status read error %d\n", ret); return ret; } return val; } static int mscc_miim_wait_ready(struct mii_bus *bus) { u32 val; return mscc_readx_poll_timeout(mscc_miim_status, bus, val, !(val & MSCC_MIIM_STATUS_STAT_BUSY), 50, 10000); } static int mscc_miim_wait_pending(struct mii_bus *bus) { u32 val; return mscc_readx_poll_timeout(mscc_miim_status, bus, val, !(val & MSCC_MIIM_STATUS_STAT_PENDING), 50, 10000); } static int mscc_miim_read(struct mii_bus *bus, int mii_id, int regnum) { struct mscc_miim_dev *miim = bus->priv; u32 val; int ret; if (regnum & MII_ADDR_C45) return -EOPNOTSUPP; ret = mscc_miim_wait_pending(bus); if (ret) goto out; ret = regmap_write(miim->regs, MSCC_MIIM_REG_CMD + miim->mii_status_offset, MSCC_MIIM_CMD_VLD | (mii_id << MSCC_MIIM_CMD_PHYAD_SHIFT) | (regnum << MSCC_MIIM_CMD_REGAD_SHIFT) | MSCC_MIIM_CMD_OPR_READ); if (ret < 0) { WARN_ONCE(1, "mscc miim write cmd reg error %d\n", ret); goto out; } ret = mscc_miim_wait_ready(bus); if (ret) goto out; ret = regmap_read(miim->regs, MSCC_MIIM_REG_DATA + miim->mii_status_offset, &val); if (ret < 0) { WARN_ONCE(1, "mscc miim read data reg error %d\n", ret); goto out; } if (val & MSCC_MIIM_DATA_ERROR) { ret = -EIO; goto out; } ret = val & 0xFFFF; out: return ret; } static int mscc_miim_write(struct mii_bus *bus, int mii_id, int regnum, u16 value) { struct mscc_miim_dev *miim = bus->priv; int ret; if (regnum & MII_ADDR_C45) return -EOPNOTSUPP; ret = mscc_miim_wait_pending(bus); if (ret < 0) goto out; ret = regmap_write(miim->regs, MSCC_MIIM_REG_CMD + miim->mii_status_offset, MSCC_MIIM_CMD_VLD | (mii_id << MSCC_MIIM_CMD_PHYAD_SHIFT) | (regnum << MSCC_MIIM_CMD_REGAD_SHIFT) | (value << MSCC_MIIM_CMD_WRDATA_SHIFT) | MSCC_MIIM_CMD_OPR_WRITE); if (ret < 0) WARN_ONCE(1, "mscc miim write error %d\n", ret); out: return ret; } static int mscc_miim_reset(struct mii_bus *bus) { struct mscc_miim_dev *miim = bus->priv; unsigned int offset, bits; int ret; if (!miim->phy_regs) return 0; offset = miim->info->phy_reset_offset; bits = miim->info->phy_reset_bits; ret = regmap_update_bits(miim->phy_regs, offset, bits, 0); if (ret < 0) { WARN_ONCE(1, "mscc reset set error %d\n", ret); return ret; } ret = regmap_update_bits(miim->phy_regs, offset, bits, bits); if (ret < 0) { WARN_ONCE(1, "mscc reset clear error %d\n", ret); return ret; } mdelay(500); return 0; } static const struct regmap_config mscc_miim_regmap_config = { .reg_bits = 32, .val_bits = 32, .reg_stride = 4, }; static const struct regmap_config mscc_miim_phy_regmap_config = { .reg_bits = 32, .val_bits = 32, .reg_stride = 4, .name = "phy", }; int mscc_miim_setup(struct device *dev, struct mii_bus **pbus, const char *name, struct regmap *mii_regmap, int status_offset) { struct mscc_miim_dev *miim; struct mii_bus *bus; bus = devm_mdiobus_alloc_size(dev, sizeof(*miim)); if (!bus) return -ENOMEM; bus->name = name; bus->read = mscc_miim_read; bus->write = mscc_miim_write; bus->reset = mscc_miim_reset; snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(dev)); bus->parent = dev; miim = bus->priv; *pbus = bus; miim->regs = mii_regmap; miim->mii_status_offset = status_offset; *pbus = bus; return 0; } EXPORT_SYMBOL(mscc_miim_setup); static int mscc_miim_clk_set(struct mii_bus *bus) { struct mscc_miim_dev *miim = bus->priv; unsigned long rate; u32 div; /* Keep the current settings */ if (!miim->bus_freq) return 0; rate = clk_get_rate(miim->clk); div = DIV_ROUND_UP(rate, 2 * miim->bus_freq) - 1; if (div == 0 || div & ~MSCC_MIIM_CFG_PRESCALE_MASK) { dev_err(&bus->dev, "Incorrect MDIO clock frequency\n"); return -EINVAL; } return regmap_update_bits(miim->regs, MSCC_MIIM_REG_CFG, MSCC_MIIM_CFG_PRESCALE_MASK, div); } static int mscc_miim_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct regmap *mii_regmap, *phy_regmap; struct device *dev = &pdev->dev; struct mscc_miim_dev *miim; struct mii_bus *bus; int ret; mii_regmap = ocelot_regmap_from_resource(pdev, 0, &mscc_miim_regmap_config); if (IS_ERR(mii_regmap)) return dev_err_probe(dev, PTR_ERR(mii_regmap), "Unable to create MIIM regmap\n"); /* This resource is optional */ phy_regmap = ocelot_regmap_from_resource_optional(pdev, 1, &mscc_miim_phy_regmap_config); if (IS_ERR(phy_regmap)) return dev_err_probe(dev, PTR_ERR(phy_regmap), "Unable to create phy register regmap\n"); ret = mscc_miim_setup(dev, &bus, "mscc_miim", mii_regmap, 0); if (ret < 0) { dev_err(dev, "Unable to setup the MDIO bus\n"); return ret; } miim = bus->priv; miim->phy_regs = phy_regmap; miim->info = device_get_match_data(dev); if (!miim->info) return -EINVAL; miim->clk = devm_clk_get_optional(dev, NULL); if (IS_ERR(miim->clk)) return PTR_ERR(miim->clk); of_property_read_u32(np, "clock-frequency", &miim->bus_freq); if (miim->bus_freq && !miim->clk) { dev_err(dev, "cannot use clock-frequency without a clock\n"); return -EINVAL; } ret = clk_prepare_enable(miim->clk); if (ret) return ret; ret = mscc_miim_clk_set(bus); if (ret) goto out_disable_clk; ret = of_mdiobus_register(bus, np); if (ret < 0) { dev_err(dev, "Cannot register MDIO bus (%d)\n", ret); goto out_disable_clk; } platform_set_drvdata(pdev, bus); return 0; out_disable_clk: clk_disable_unprepare(miim->clk); return ret; } static int mscc_miim_remove(struct platform_device *pdev) { struct mii_bus *bus = platform_get_drvdata(pdev); struct mscc_miim_dev *miim = bus->priv; clk_disable_unprepare(miim->clk); mdiobus_unregister(bus); return 0; } static const struct mscc_miim_info mscc_ocelot_miim_info = { .phy_reset_offset = MSCC_PHY_REG_PHY_CFG, .phy_reset_bits = PHY_CFG_PHY_ENA | PHY_CFG_PHY_COMMON_RESET | PHY_CFG_PHY_RESET, }; static const struct mscc_miim_info microchip_lan966x_miim_info = { .phy_reset_offset = LAN966X_CUPHY_COMMON_CFG, .phy_reset_bits = CUPHY_COMMON_CFG_RESET_N, }; static const struct of_device_id mscc_miim_match[] = { { .compatible = "mscc,ocelot-miim", .data = &mscc_ocelot_miim_info }, { .compatible = "microchip,lan966x-miim", .data = µchip_lan966x_miim_info }, { } }; MODULE_DEVICE_TABLE(of, mscc_miim_match); static struct platform_driver mscc_miim_driver = { .probe = mscc_miim_probe, .remove = mscc_miim_remove, .driver = { .name = "mscc-miim", .of_match_table = mscc_miim_match, }, }; module_platform_driver(mscc_miim_driver); MODULE_DESCRIPTION("Microsemi MIIM driver"); MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@bootlin.com>"); MODULE_LICENSE("Dual MIT/GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1