| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Linus Torvalds | 396 | 49.62% | 1 | 12.50% |
| Kevin Curtis | 390 | 48.87% | 1 | 12.50% |
| Linus Torvalds (pre-git) | 7 | 0.88% | 2 | 25.00% |
| Thomas Gleixner | 2 | 0.25% | 1 | 12.50% |
| Xiang wangx | 1 | 0.13% | 1 | 12.50% |
| Krzysztof Hałasa | 1 | 0.13% | 1 | 12.50% |
| Gustavo A. R. Silva | 1 | 0.13% | 1 | 12.50% |
| Total | 798 | 8 |
/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * FarSync X21 driver for Linux * * Actually sync driver for X.21, V.35 and V.24 on FarSync T-series cards * * Copyright (C) 2001 FarSite Communications Ltd. * www.farsite.co.uk * * Author: R.J.Dunlop <bob.dunlop@farsite.co.uk> * * For the most part this file only contains structures and information * that is visible to applications outside the driver. Shared memory * layout etc is internal to the driver and described within farsync.c. * Overlap exists in that the values used for some fields within the * ioctl interface extend into the cards firmware interface so values in * this file may not be changed arbitrarily. */ /* What's in a name * * The project name for this driver is Oscar. The driver is intended to be * used with the FarSite T-Series cards (T2P & T4P) running in the high * speed frame shifter mode. This is sometimes referred to as X.21 mode * which is a complete misnomer as the card continues to support V.24 and * V.35 as well as X.21. * * A short common prefix is useful for routines within the driver to avoid * conflict with other similar drivers and I chosen to use "fst_" for this * purpose (FarSite T-series). * * Finally the device driver needs a short network interface name. Since * "hdlc" is already in use I've chosen the even less informative "sync" * for the present. */ #define FST_NAME "fst" /* In debug/info etc */ #define FST_NDEV_NAME "sync" /* For net interface */ #define FST_DEV_NAME "farsync" /* For misc interfaces */ /* User version number * * This version number is incremented with each official release of the * package and is a simplified number for normal user reference. * Individual files are tracked by the version control system and may * have individual versions (or IDs) that move much faster than * the release version as individual updates are tracked. */ #define FST_USER_VERSION "1.04" /* Ioctl call command values */ #define FSTWRITE (SIOCDEVPRIVATE+10) #define FSTCPURESET (SIOCDEVPRIVATE+11) #define FSTCPURELEASE (SIOCDEVPRIVATE+12) #define FSTGETCONF (SIOCDEVPRIVATE+13) #define FSTSETCONF (SIOCDEVPRIVATE+14) /* FSTWRITE * * Used to write a block of data (firmware etc) before the card is running */ struct fstioc_write { unsigned int size; unsigned int offset; unsigned char data[]; }; /* FSTCPURESET and FSTCPURELEASE * * These take no additional data. * FSTCPURESET forces the cards CPU into a reset state and holds it there. * FSTCPURELEASE releases the CPU from this reset state allowing it to run, * the reset vector should be setup before this ioctl is run. */ /* FSTGETCONF and FSTSETCONF * * Get and set a card/ports configuration. * In order to allow selective setting of items and for the kernel to * indicate a partial status response the first field "valid" is a bitmask * indicating which other fields in the structure are valid. * Many of the field names in this structure match those used in the * firmware shared memory configuration interface and come originally from * the NT header file Smc.h * * When used with FSTGETCONF this structure should be zeroed before use. * This is to allow for possible future expansion when some of the fields * might be used to indicate a different (expanded) structure. */ struct fstioc_info { unsigned int valid; /* Bits of structure that are valid */ unsigned int nports; /* Number of serial ports */ unsigned int type; /* Type index of card */ unsigned int state; /* State of card */ unsigned int index; /* Index of port ioctl was issued on */ unsigned int smcFirmwareVersion; unsigned long kernelVersion; /* What Kernel version we are working with */ unsigned short lineInterface; /* Physical interface type */ unsigned char proto; /* Line protocol */ unsigned char internalClock; /* 1 => internal clock, 0 => external */ unsigned int lineSpeed; /* Speed in bps */ unsigned int v24IpSts; /* V.24 control input status */ unsigned int v24OpSts; /* V.24 control output status */ unsigned short clockStatus; /* lsb: 0=> present, 1=> absent */ unsigned short cableStatus; /* lsb: 0=> present, 1=> absent */ unsigned short cardMode; /* lsb: LED id mode */ unsigned short debug; /* Debug flags */ unsigned char transparentMode; /* Not used always 0 */ unsigned char invertClock; /* Invert clock feature for syncing */ unsigned char startingSlot; /* Time slot to use for start of tx */ unsigned char clockSource; /* External or internal */ unsigned char framing; /* E1, T1 or J1 */ unsigned char structure; /* unframed, double, crc4, f4, f12, */ /* f24 f72 */ unsigned char interface; /* rj48c or bnc */ unsigned char coding; /* hdb3 b8zs */ unsigned char lineBuildOut; /* 0, -7.5, -15, -22 */ unsigned char equalizer; /* short or lon haul settings */ unsigned char loopMode; /* various loopbacks */ unsigned char range; /* cable lengths */ unsigned char txBufferMode; /* tx elastic buffer depth */ unsigned char rxBufferMode; /* rx elastic buffer depth */ unsigned char losThreshold; /* Attenuation on LOS signal */ unsigned char idleCode; /* Value to send as idle timeslot */ unsigned int receiveBufferDelay; /* delay thro rx buffer timeslots */ unsigned int framingErrorCount; /* framing errors */ unsigned int codeViolationCount; /* code violations */ unsigned int crcErrorCount; /* CRC errors */ int lineAttenuation; /* in dB*/ unsigned short lossOfSignal; unsigned short receiveRemoteAlarm; unsigned short alarmIndicationSignal; }; /* "valid" bitmask */ #define FSTVAL_NONE 0x00000000 /* Nothing valid (firmware not running). * Slight misnomer. In fact nports, * type, state and index will be set * based on hardware detected. */ #define FSTVAL_OMODEM 0x0000001F /* First 5 bits correspond to the * output status bits defined for * v24OpSts */ #define FSTVAL_SPEED 0x00000020 /* internalClock, lineSpeed, clockStatus */ #define FSTVAL_CABLE 0x00000040 /* lineInterface, cableStatus */ #define FSTVAL_IMODEM 0x00000080 /* v24IpSts */ #define FSTVAL_CARD 0x00000100 /* nports, type, state, index, * smcFirmwareVersion */ #define FSTVAL_PROTO 0x00000200 /* proto */ #define FSTVAL_MODE 0x00000400 /* cardMode */ #define FSTVAL_PHASE 0x00000800 /* Clock phase */ #define FSTVAL_TE1 0x00001000 /* T1E1 Configuration */ #define FSTVAL_DEBUG 0x80000000 /* debug */ #define FSTVAL_ALL 0x00001FFF /* Note: does not include DEBUG flag */ /* "type" */ #define FST_TYPE_NONE 0 /* Probably should never happen */ #define FST_TYPE_T2P 1 /* T2P X21 2 port card */ #define FST_TYPE_T4P 2 /* T4P X21 4 port card */ #define FST_TYPE_T1U 3 /* T1U X21 1 port card */ #define FST_TYPE_T2U 4 /* T2U X21 2 port card */ #define FST_TYPE_T4U 5 /* T4U X21 4 port card */ #define FST_TYPE_TE1 6 /* T1E1 X21 1 port card */ /* "family" */ #define FST_FAMILY_TXP 0 /* T2P or T4P */ #define FST_FAMILY_TXU 1 /* T1U or T2U or T4U */ /* "state" */ #define FST_UNINIT 0 /* Raw uninitialised state following * system startup */ #define FST_RESET 1 /* Processor held in reset state */ #define FST_DOWNLOAD 2 /* Card being downloaded */ #define FST_STARTING 3 /* Released following download */ #define FST_RUNNING 4 /* Processor running */ #define FST_BADVERSION 5 /* Bad shared memory version detected */ #define FST_HALTED 6 /* Processor flagged a halt */ #define FST_IFAILED 7 /* Firmware issued initialisation failed * interrupt */ /* "lineInterface" */ #define V24 1 #define X21 2 #define V35 3 #define X21D 4 #define T1 5 #define E1 6 #define J1 7 /* "proto" */ #define FST_RAW 4 /* Two way raw packets */ #define FST_GEN_HDLC 5 /* Using "Generic HDLC" module */ /* "internalClock" */ #define INTCLK 1 #define EXTCLK 0 /* "v24IpSts" bitmask */ #define IPSTS_CTS 0x00000001 /* Clear To Send (Indicate for X.21) */ #define IPSTS_INDICATE IPSTS_CTS #define IPSTS_DSR 0x00000002 /* Data Set Ready (T2P Port A) */ #define IPSTS_DCD 0x00000004 /* Data Carrier Detect */ #define IPSTS_RI 0x00000008 /* Ring Indicator (T2P Port A) */ #define IPSTS_TMI 0x00000010 /* Test Mode Indicator (Not Supported)*/ /* "v24OpSts" bitmask */ #define OPSTS_RTS 0x00000001 /* Request To Send (Control for X.21) */ #define OPSTS_CONTROL OPSTS_RTS #define OPSTS_DTR 0x00000002 /* Data Terminal Ready */ #define OPSTS_DSRS 0x00000004 /* Data Signalling Rate Select (Not * Supported) */ #define OPSTS_SS 0x00000008 /* Select Standby (Not Supported) */ #define OPSTS_LL 0x00000010 /* Maintenance Test (Not Supported) */ /* "cardMode" bitmask */ #define CARD_MODE_IDENTIFY 0x0001 /* * Constants for T1/E1 configuration */ /* * Clock source */ #define CLOCKING_SLAVE 0 #define CLOCKING_MASTER 1 /* * Framing */ #define FRAMING_E1 0 #define FRAMING_J1 1 #define FRAMING_T1 2 /* * Structure */ #define STRUCTURE_UNFRAMED 0 #define STRUCTURE_E1_DOUBLE 1 #define STRUCTURE_E1_CRC4 2 #define STRUCTURE_E1_CRC4M 3 #define STRUCTURE_T1_4 4 #define STRUCTURE_T1_12 5 #define STRUCTURE_T1_24 6 #define STRUCTURE_T1_72 7 /* * Interface */ #define INTERFACE_RJ48C 0 #define INTERFACE_BNC 1 /* * Coding */ #define CODING_HDB3 0 #define CODING_NRZ 1 #define CODING_CMI 2 #define CODING_CMI_HDB3 3 #define CODING_CMI_B8ZS 4 #define CODING_AMI 5 #define CODING_AMI_ZCS 6 #define CODING_B8ZS 7 /* * Line Build Out */ #define LBO_0dB 0 #define LBO_7dB5 1 #define LBO_15dB 2 #define LBO_22dB5 3 /* * Range for long haul t1 > 655ft */ #define RANGE_0_133_FT 0 #define RANGE_0_40_M RANGE_0_133_FT #define RANGE_133_266_FT 1 #define RANGE_40_81_M RANGE_133_266_FT #define RANGE_266_399_FT 2 #define RANGE_81_122_M RANGE_266_399_FT #define RANGE_399_533_FT 3 #define RANGE_122_162_M RANGE_399_533_FT #define RANGE_533_655_FT 4 #define RANGE_162_200_M RANGE_533_655_FT /* * Receive Equaliser */ #define EQUALIZER_SHORT 0 #define EQUALIZER_LONG 1 /* * Loop modes */ #define LOOP_NONE 0 #define LOOP_LOCAL 1 #define LOOP_PAYLOAD_EXC_TS0 2 #define LOOP_PAYLOAD_INC_TS0 3 #define LOOP_REMOTE 4 /* * Buffer modes */ #define BUFFER_2_FRAME 0 #define BUFFER_1_FRAME 1 #define BUFFER_96_BIT 2 #define BUFFER_NONE 3 /* Debug support * * These should only be enabled for development kernels, production code * should define FST_DEBUG=0 in order to exclude the code. * Setting FST_DEBUG=1 will include all the debug code but in a disabled * state, use the FSTSETCONF ioctl to enable specific debug actions, or * FST_DEBUG can be set to prime the debug selection. */ #define FST_DEBUG 0x0000 #if FST_DEBUG extern int fst_debug_mask; /* Bit mask of actions to debug, bits * listed below. Note: Bit 0 is used * to trigger the inclusion of this * code, without enabling any actions. */ #define DBG_INIT 0x0002 /* Card detection and initialisation */ #define DBG_OPEN 0x0004 /* Open and close sequences */ #define DBG_PCI 0x0008 /* PCI config operations */ #define DBG_IOCTL 0x0010 /* Ioctls and other config */ #define DBG_INTR 0x0020 /* Interrupt routines (be careful) */ #define DBG_TX 0x0040 /* Packet transmission */ #define DBG_RX 0x0080 /* Packet reception */ #define DBG_CMD 0x0100 /* Port command issuing */ #define DBG_ASS 0xFFFF /* Assert like statements. Code that * should never be reached, if you see * one of these then I've been an ass */ #endif /* FST_DEBUG */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1