Contributors: 11
Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
Oleksij Rempel |
374 |
60.91% |
4 |
14.81% |
Sujith Manoharan |
106 |
17.26% |
9 |
33.33% |
Felix Fietkau |
45 |
7.33% |
3 |
11.11% |
Luis R. Rodriguez |
44 |
7.17% |
3 |
11.11% |
Rajkumar Manoharan |
18 |
2.93% |
2 |
7.41% |
Janusz Dziedzic |
14 |
2.28% |
1 |
3.70% |
Pavel Roskin |
4 |
0.65% |
1 |
3.70% |
Senthil Balasubramanian |
4 |
0.65% |
1 |
3.70% |
Jouni Malinen |
2 |
0.33% |
1 |
3.70% |
Alexey Dobriyan |
2 |
0.33% |
1 |
3.70% |
Joe Perches |
1 |
0.16% |
1 |
3.70% |
Total |
614 |
|
27 |
|
/*
* Copyright (c) 2008-2011 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "common.h"
#define FUDGE 2
static u32 ath9k_get_next_tbtt(struct ath_hw *ah, u64 tsf,
unsigned int interval)
{
unsigned int offset, divisor;
tsf += TU_TO_USEC(FUDGE + ah->config.sw_beacon_response_time);
divisor = TU_TO_USEC(interval);
div_u64_rem(tsf, divisor, &offset);
return (u32) tsf + divisor - offset;
}
/*
* This sets up the beacon timers according to the timestamp of the last
* received beacon and the current TSF, configures PCF and DTIM
* handling, programs the sleep registers so the hardware will wakeup in
* time to receive beacons, and configures the beacon miss handling so
* we'll receive a BMISS interrupt when we stop seeing beacons from the AP
* we've associated with.
*/
int ath9k_cmn_beacon_config_sta(struct ath_hw *ah,
struct ath_beacon_config *conf,
struct ath9k_beacon_state *bs)
{
struct ath_common *common = ath9k_hw_common(ah);
int dtim_intval;
u64 tsf;
/* No need to configure beacon if we are not associated */
if (!test_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags)) {
ath_dbg(common, BEACON,
"STA is not yet associated..skipping beacon config\n");
return -EPERM;
}
memset(bs, 0, sizeof(*bs));
conf->intval = conf->beacon_interval;
/*
* Setup dtim parameters according to
* last beacon we received (which may be none).
*/
dtim_intval = conf->intval * conf->dtim_period;
/*
* Pull nexttbtt forward to reflect the current
* TSF and calculate dtim state for the result.
*/
tsf = ath9k_hw_gettsf64(ah);
conf->nexttbtt = ath9k_get_next_tbtt(ah, tsf, conf->intval);
bs->bs_intval = TU_TO_USEC(conf->intval);
bs->bs_dtimperiod = conf->dtim_period * bs->bs_intval;
bs->bs_nexttbtt = conf->nexttbtt;
bs->bs_nextdtim = conf->nexttbtt;
if (conf->dtim_period > 1)
bs->bs_nextdtim = ath9k_get_next_tbtt(ah, tsf, dtim_intval);
/*
* Calculate the number of consecutive beacons to miss* before taking
* a BMISS interrupt. The configuration is specified in TU so we only
* need calculate based on the beacon interval. Note that we clamp the
* result to at most 15 beacons.
*/
bs->bs_bmissthreshold = DIV_ROUND_UP(conf->bmiss_timeout, conf->intval);
if (bs->bs_bmissthreshold > 15)
bs->bs_bmissthreshold = 15;
else if (bs->bs_bmissthreshold <= 0)
bs->bs_bmissthreshold = 1;
/*
* Calculate sleep duration. The configuration is given in ms.
* We ensure a multiple of the beacon period is used. Also, if the sleep
* duration is greater than the DTIM period then it makes senses
* to make it a multiple of that.
*
* XXX fixed at 100ms
*/
bs->bs_sleepduration = TU_TO_USEC(roundup(IEEE80211_MS_TO_TU(100),
conf->intval));
if (bs->bs_sleepduration > bs->bs_dtimperiod)
bs->bs_sleepduration = bs->bs_dtimperiod;
/* TSF out of range threshold fixed at 1 second */
bs->bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD;
ath_dbg(common, BEACON, "bmiss: %u sleep: %u\n",
bs->bs_bmissthreshold, bs->bs_sleepduration);
return 0;
}
EXPORT_SYMBOL(ath9k_cmn_beacon_config_sta);
void ath9k_cmn_beacon_config_adhoc(struct ath_hw *ah,
struct ath_beacon_config *conf)
{
struct ath_common *common = ath9k_hw_common(ah);
conf->intval = TU_TO_USEC(conf->beacon_interval);
if (conf->ibss_creator)
conf->nexttbtt = conf->intval;
else
conf->nexttbtt = ath9k_get_next_tbtt(ah, ath9k_hw_gettsf64(ah),
conf->beacon_interval);
if (conf->enable_beacon)
ah->imask |= ATH9K_INT_SWBA;
else
ah->imask &= ~ATH9K_INT_SWBA;
ath_dbg(common, BEACON,
"IBSS (%s) nexttbtt: %u intval: %u conf_intval: %u\n",
(conf->enable_beacon) ? "Enable" : "Disable",
conf->nexttbtt, conf->intval, conf->beacon_interval);
}
EXPORT_SYMBOL(ath9k_cmn_beacon_config_adhoc);
/*
* For multi-bss ap support beacons are either staggered evenly over N slots or
* burst together. For the former arrange for the SWBA to be delivered for each
* slot. Slots that are not occupied will generate nothing.
*/
void ath9k_cmn_beacon_config_ap(struct ath_hw *ah,
struct ath_beacon_config *conf,
unsigned int bc_buf)
{
struct ath_common *common = ath9k_hw_common(ah);
/* NB: the beacon interval is kept internally in TU's */
conf->intval = TU_TO_USEC(conf->beacon_interval);
conf->intval /= bc_buf;
conf->nexttbtt = ath9k_get_next_tbtt(ah, ath9k_hw_gettsf64(ah),
conf->beacon_interval);
if (conf->enable_beacon)
ah->imask |= ATH9K_INT_SWBA;
else
ah->imask &= ~ATH9K_INT_SWBA;
ath_dbg(common, BEACON,
"AP (%s) nexttbtt: %u intval: %u conf_intval: %u\n",
(conf->enable_beacon) ? "Enable" : "Disable",
conf->nexttbtt, conf->intval, conf->beacon_interval);
}
EXPORT_SYMBOL(ath9k_cmn_beacon_config_ap);