Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Arend Van Spriel | 837 | 91.48% | 4 | 66.67% |
Chi-Hsien Lin | 49 | 5.36% | 1 | 16.67% |
Piotr Haber | 29 | 3.17% | 1 | 16.67% |
Total | 915 | 6 |
// SPDX-License-Identifier: ISC /* * Copyright (c) 2010 Broadcom Corporation */ #ifndef _SBCHIPC_H #define _SBCHIPC_H #include "defs.h" /* for PAD macro */ #define CHIPCREGOFFS(field) offsetof(struct chipcregs, field) struct chipcregs { u32 chipid; /* 0x0 */ u32 capabilities; u32 corecontrol; /* corerev >= 1 */ u32 bist; /* OTP */ u32 otpstatus; /* 0x10, corerev >= 10 */ u32 otpcontrol; u32 otpprog; u32 otplayout; /* corerev >= 23 */ /* Interrupt control */ u32 intstatus; /* 0x20 */ u32 intmask; /* Chip specific regs */ u32 chipcontrol; /* 0x28, rev >= 11 */ u32 chipstatus; /* 0x2c, rev >= 11 */ /* Jtag Master */ u32 jtagcmd; /* 0x30, rev >= 10 */ u32 jtagir; u32 jtagdr; u32 jtagctrl; /* serial flash interface registers */ u32 flashcontrol; /* 0x40 */ u32 flashaddress; u32 flashdata; u32 PAD[1]; /* Silicon backplane configuration broadcast control */ u32 broadcastaddress; /* 0x50 */ u32 broadcastdata; /* gpio - cleared only by power-on-reset */ u32 gpiopullup; /* 0x58, corerev >= 20 */ u32 gpiopulldown; /* 0x5c, corerev >= 20 */ u32 gpioin; /* 0x60 */ u32 gpioout; /* 0x64 */ u32 gpioouten; /* 0x68 */ u32 gpiocontrol; /* 0x6C */ u32 gpiointpolarity; /* 0x70 */ u32 gpiointmask; /* 0x74 */ /* GPIO events corerev >= 11 */ u32 gpioevent; u32 gpioeventintmask; /* Watchdog timer */ u32 watchdog; /* 0x80 */ /* GPIO events corerev >= 11 */ u32 gpioeventintpolarity; /* GPIO based LED powersave registers corerev >= 16 */ u32 gpiotimerval; /* 0x88 */ u32 gpiotimeroutmask; /* clock control */ u32 clockcontrol_n; /* 0x90 */ u32 clockcontrol_sb; /* aka m0 */ u32 clockcontrol_pci; /* aka m1 */ u32 clockcontrol_m2; /* mii/uart/mipsref */ u32 clockcontrol_m3; /* cpu */ u32 clkdiv; /* corerev >= 3 */ u32 gpiodebugsel; /* corerev >= 28 */ u32 capabilities_ext; /* 0xac */ /* pll delay registers (corerev >= 4) */ u32 pll_on_delay; /* 0xb0 */ u32 fref_sel_delay; u32 slow_clk_ctl; /* 5 < corerev < 10 */ u32 PAD; /* Instaclock registers (corerev >= 10) */ u32 system_clk_ctl; /* 0xc0 */ u32 clkstatestretch; u32 PAD[2]; /* Indirect backplane access (corerev >= 22) */ u32 bp_addrlow; /* 0xd0 */ u32 bp_addrhigh; u32 bp_data; u32 PAD; u32 bp_indaccess; u32 PAD[3]; /* More clock dividers (corerev >= 32) */ u32 clkdiv2; u32 PAD[2]; /* In AI chips, pointer to erom */ u32 eromptr; /* 0xfc */ /* ExtBus control registers (corerev >= 3) */ u32 pcmcia_config; /* 0x100 */ u32 pcmcia_memwait; u32 pcmcia_attrwait; u32 pcmcia_iowait; u32 ide_config; u32 ide_memwait; u32 ide_attrwait; u32 ide_iowait; u32 prog_config; u32 prog_waitcount; u32 flash_config; u32 flash_waitcount; u32 SECI_config; /* 0x130 SECI configuration */ u32 PAD[3]; /* Enhanced Coexistence Interface (ECI) registers (corerev >= 21) */ u32 eci_output; /* 0x140 */ u32 eci_control; u32 eci_inputlo; u32 eci_inputmi; u32 eci_inputhi; u32 eci_inputintpolaritylo; u32 eci_inputintpolaritymi; u32 eci_inputintpolarityhi; u32 eci_intmasklo; u32 eci_intmaskmi; u32 eci_intmaskhi; u32 eci_eventlo; u32 eci_eventmi; u32 eci_eventhi; u32 eci_eventmasklo; u32 eci_eventmaskmi; u32 eci_eventmaskhi; u32 PAD[3]; /* SROM interface (corerev >= 32) */ u32 sromcontrol; /* 0x190 */ u32 sromaddress; u32 sromdata; u32 PAD[17]; /* Clock control and hardware workarounds (corerev >= 20) */ u32 clk_ctl_st; /* 0x1e0 */ u32 hw_war; u32 PAD[70]; /* UARTs */ u8 uart0data; /* 0x300 */ u8 uart0imr; u8 uart0fcr; u8 uart0lcr; u8 uart0mcr; u8 uart0lsr; u8 uart0msr; u8 uart0scratch; u8 PAD[248]; /* corerev >= 1 */ u8 uart1data; /* 0x400 */ u8 uart1imr; u8 uart1fcr; u8 uart1lcr; u8 uart1mcr; u8 uart1lsr; u8 uart1msr; u8 uart1scratch; u32 PAD[62]; /* save/restore, corerev >= 48 */ u32 sr_capability; /* 0x500 */ u32 sr_control0; /* 0x504 */ u32 sr_control1; /* 0x508 */ u32 gpio_control; /* 0x50C */ u32 PAD[60]; /* PMU registers (corerev >= 20) */ u32 pmucontrol; /* 0x600 */ u32 pmucapabilities; u32 pmustatus; u32 res_state; u32 res_pending; u32 pmutimer; u32 min_res_mask; u32 max_res_mask; u32 res_table_sel; u32 res_dep_mask; u32 res_updn_timer; u32 res_timer; u32 clkstretch; u32 pmuwatchdog; u32 gpiosel; /* 0x638, rev >= 1 */ u32 gpioenable; /* 0x63c, rev >= 1 */ u32 res_req_timer_sel; u32 res_req_timer; u32 res_req_mask; u32 pmucapabilities_ext; /* 0x64c, pmurev >=15 */ u32 chipcontrol_addr; /* 0x650 */ u32 chipcontrol_data; /* 0x654 */ u32 regcontrol_addr; u32 regcontrol_data; u32 pllcontrol_addr; u32 pllcontrol_data; u32 pmustrapopt; /* 0x668, corerev >= 28 */ u32 pmu_xtalfreq; /* 0x66C, pmurev >= 10 */ u32 retention_ctl; /* 0x670, pmurev >= 15 */ u32 PAD[3]; u32 retention_grpidx; /* 0x680 */ u32 retention_grpctl; /* 0x684 */ u32 PAD[94]; u16 sromotp[768]; }; /* chipid */ #define CID_ID_MASK 0x0000ffff /* Chip Id mask */ #define CID_REV_MASK 0x000f0000 /* Chip Revision mask */ #define CID_REV_SHIFT 16 /* Chip Revision shift */ #define CID_PKG_MASK 0x00f00000 /* Package Option mask */ #define CID_PKG_SHIFT 20 /* Package Option shift */ #define CID_CC_MASK 0x0f000000 /* CoreCount (corerev >= 4) */ #define CID_CC_SHIFT 24 #define CID_TYPE_MASK 0xf0000000 /* Chip Type */ #define CID_TYPE_SHIFT 28 /* capabilities */ #define CC_CAP_UARTS_MASK 0x00000003 /* Number of UARTs */ #define CC_CAP_MIPSEB 0x00000004 /* MIPS is in big-endian mode */ #define CC_CAP_UCLKSEL 0x00000018 /* UARTs clock select */ /* UARTs are driven by internal divided clock */ #define CC_CAP_UINTCLK 0x00000008 #define CC_CAP_UARTGPIO 0x00000020 /* UARTs own GPIOs 15:12 */ #define CC_CAP_EXTBUS_MASK 0x000000c0 /* External bus mask */ #define CC_CAP_EXTBUS_NONE 0x00000000 /* No ExtBus present */ #define CC_CAP_EXTBUS_FULL 0x00000040 /* ExtBus: PCMCIA, IDE & Prog */ #define CC_CAP_EXTBUS_PROG 0x00000080 /* ExtBus: ProgIf only */ #define CC_CAP_FLASH_MASK 0x00000700 /* Type of flash */ #define CC_CAP_PLL_MASK 0x00038000 /* Type of PLL */ #define CC_CAP_PWR_CTL 0x00040000 /* Power control */ #define CC_CAP_OTPSIZE 0x00380000 /* OTP Size (0 = none) */ #define CC_CAP_OTPSIZE_SHIFT 19 /* OTP Size shift */ #define CC_CAP_OTPSIZE_BASE 5 /* OTP Size base */ #define CC_CAP_JTAGP 0x00400000 /* JTAG Master Present */ #define CC_CAP_ROM 0x00800000 /* Internal boot rom active */ #define CC_CAP_BKPLN64 0x08000000 /* 64-bit backplane */ #define CC_CAP_PMU 0x10000000 /* PMU Present, rev >= 20 */ #define CC_CAP_SROM 0x40000000 /* Srom Present, rev >= 32 */ /* Nand flash present, rev >= 35 */ #define CC_CAP_NFLASH 0x80000000 #define CC_CAP2_SECI 0x00000001 /* SECI Present, rev >= 36 */ /* GSIO (spi/i2c) present, rev >= 37 */ #define CC_CAP2_GSIO 0x00000002 /* sr_control0, rev >= 48 */ #define CC_SR_CTL0_ENABLE_MASK BIT(0) #define CC_SR_CTL0_ENABLE_SHIFT 0 #define CC_SR_CTL0_EN_SR_ENG_CLK_SHIFT 1 /* sr_clk to sr_memory enable */ #define CC_SR_CTL0_RSRC_TRIGGER_SHIFT 2 /* Rising edge resource trigger 0 to * sr_engine */ #define CC_SR_CTL0_MIN_DIV_SHIFT 6 /* Min division value for fast clk * in sr_engine */ #define CC_SR_CTL0_EN_SBC_STBY_SHIFT 16 #define CC_SR_CTL0_EN_SR_ALP_CLK_MASK_SHIFT 18 #define CC_SR_CTL0_EN_SR_HT_CLK_SHIFT 19 #define CC_SR_CTL0_ALLOW_PIC_SHIFT 20 /* Allow pic to separate power * domains */ #define CC_SR_CTL0_MAX_SR_LQ_CLK_CNT_SHIFT 25 #define CC_SR_CTL0_EN_MEM_DISABLE_FOR_SLEEP 30 /* pmucapabilities */ #define PCAP_REV_MASK 0x000000ff #define PCAP_RC_MASK 0x00001f00 #define PCAP_RC_SHIFT 8 #define PCAP_TC_MASK 0x0001e000 #define PCAP_TC_SHIFT 13 #define PCAP_PC_MASK 0x001e0000 #define PCAP_PC_SHIFT 17 #define PCAP_VC_MASK 0x01e00000 #define PCAP_VC_SHIFT 21 #define PCAP_CC_MASK 0x1e000000 #define PCAP_CC_SHIFT 25 #define PCAP5_PC_MASK 0x003e0000 /* PMU corerev >= 5 */ #define PCAP5_PC_SHIFT 17 #define PCAP5_VC_MASK 0x07c00000 #define PCAP5_VC_SHIFT 22 #define PCAP5_CC_MASK 0xf8000000 #define PCAP5_CC_SHIFT 27 /* pmucapabilites_ext PMU rev >= 15 */ #define PCAPEXT_SR_SUPPORTED_MASK (1 << 1) /* retention_ctl PMU rev >= 15 */ #define PMU_RCTL_MACPHY_DISABLE_MASK (1 << 26) #define PMU_RCTL_LOGIC_DISABLE_MASK (1 << 27) /* * Maximum delay for the PMU state transition in us. * This is an upper bound intended for spinwaits etc. */ #define PMU_MAX_TRANSITION_DLY 15000 #endif /* _SBCHIPC_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1