| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Marcelo Tosatti | 1030 | 42.40% | 1 | 1.37% |
| Dan J Williams | 468 | 19.27% | 23 | 31.51% |
| Holger Schurig | 362 | 14.90% | 12 | 16.44% |
| David Woodhouse | 213 | 8.77% | 11 | 15.07% |
| Anna Neal | 77 | 3.17% | 3 | 4.11% |
| Eric Dumazet | 56 | 2.31% | 1 | 1.37% |
| Bing Zhao | 53 | 2.18% | 3 | 4.11% |
| Luis Carlos Cobo Rus | 41 | 1.69% | 6 | 8.22% |
| Javier Cardona | 38 | 1.56% | 2 | 2.74% |
| Kiran Divekar | 34 | 1.40% | 1 | 1.37% |
| Brajesh Dave | 17 | 0.70% | 1 | 1.37% |
| Kees Cook | 12 | 0.49% | 2 | 2.74% |
| Randy Dunlap | 10 | 0.41% | 1 | 1.37% |
| Colin McCabe | 5 | 0.21% | 1 | 1.37% |
| Johannes Berg | 4 | 0.16% | 1 | 1.37% |
| Amitkumar Karwar | 4 | 0.16% | 1 | 1.37% |
| Gustavo A. R. Silva | 2 | 0.08% | 1 | 1.37% |
| John W. Linville | 2 | 0.08% | 1 | 1.37% |
| Greg Kroah-Hartman | 1 | 0.04% | 1 | 1.37% |
| Total | 2429 | 73 |
/* SPDX-License-Identifier: GPL-2.0 */ /* * This file function prototypes, data structure * and definitions for all the host/station commands */ #ifndef _LBS_HOST_H_ #define _LBS_HOST_H_ #include "types.h" #include "defs.h" #define DEFAULT_AD_HOC_CHANNEL 6 #define CMD_OPTION_WAITFORRSP 0x0002 /* Host command IDs */ /* * Return command are almost always the same as the host command, but with * bit 15 set high. There are a few exceptions, though... */ #define CMD_RET(cmd) (0x8000 | cmd) /* Return command convention exceptions: */ #define CMD_RET_802_11_ASSOCIATE 0x8012 /* Command codes */ #define CMD_GET_HW_SPEC 0x0003 #define CMD_EEPROM_UPDATE 0x0004 #define CMD_802_11_RESET 0x0005 #define CMD_802_11_SCAN 0x0006 #define CMD_802_11_GET_LOG 0x000b #define CMD_MAC_MULTICAST_ADR 0x0010 #define CMD_802_11_AUTHENTICATE 0x0011 #define CMD_802_11_EEPROM_ACCESS 0x0059 #define CMD_802_11_ASSOCIATE 0x0050 #define CMD_802_11_SET_WEP 0x0013 #define CMD_802_11_GET_STAT 0x0014 #define CMD_802_3_GET_STAT 0x0015 #define CMD_802_11_SNMP_MIB 0x0016 #define CMD_MAC_REG_MAP 0x0017 #define CMD_BBP_REG_MAP 0x0018 #define CMD_MAC_REG_ACCESS 0x0019 #define CMD_BBP_REG_ACCESS 0x001a #define CMD_RF_REG_ACCESS 0x001b #define CMD_802_11_RADIO_CONTROL 0x001c #define CMD_802_11_RF_CHANNEL 0x001d #define CMD_802_11_RF_TX_POWER 0x001e #define CMD_802_11_RSSI 0x001f #define CMD_802_11_RF_ANTENNA 0x0020 #define CMD_802_11_PS_MODE 0x0021 #define CMD_802_11_DATA_RATE 0x0022 #define CMD_RF_REG_MAP 0x0023 #define CMD_802_11_DEAUTHENTICATE 0x0024 #define CMD_802_11_REASSOCIATE 0x0025 #define CMD_MAC_CONTROL 0x0028 #define CMD_802_11_AD_HOC_START 0x002b #define CMD_802_11_AD_HOC_JOIN 0x002c #define CMD_802_11_QUERY_TKIP_REPLY_CNTRS 0x002e #define CMD_802_11_ENABLE_RSN 0x002f #define CMD_802_11_SET_AFC 0x003c #define CMD_802_11_GET_AFC 0x003d #define CMD_802_11_DEEP_SLEEP 0x003e #define CMD_802_11_AD_HOC_STOP 0x0040 #define CMD_802_11_HOST_SLEEP_CFG 0x0043 #define CMD_802_11_WAKEUP_CONFIRM 0x0044 #define CMD_802_11_HOST_SLEEP_ACTIVATE 0x0045 #define CMD_802_11_BEACON_STOP 0x0049 #define CMD_802_11_MAC_ADDRESS 0x004d #define CMD_802_11_LED_GPIO_CTRL 0x004e #define CMD_802_11_BAND_CONFIG 0x0058 #define CMD_GSPI_BUS_CONFIG 0x005a #define CMD_802_11D_DOMAIN_INFO 0x005b #define CMD_802_11_KEY_MATERIAL 0x005e #define CMD_802_11_SLEEP_PARAMS 0x0066 #define CMD_802_11_INACTIVITY_TIMEOUT 0x0067 #define CMD_802_11_SLEEP_PERIOD 0x0068 #define CMD_802_11_TPC_CFG 0x0072 #define CMD_802_11_PA_CFG 0x0073 #define CMD_802_11_FW_WAKE_METHOD 0x0074 #define CMD_802_11_SUBSCRIBE_EVENT 0x0075 #define CMD_802_11_RATE_ADAPT_RATESET 0x0076 #define CMD_802_11_TX_RATE_QUERY 0x007f #define CMD_GET_TSF 0x0080 #define CMD_BT_ACCESS 0x0087 #define CMD_FWT_ACCESS 0x0095 #define CMD_802_11_MONITOR_MODE 0x0098 #define CMD_MESH_ACCESS 0x009b #define CMD_MESH_CONFIG_OLD 0x00a3 #define CMD_MESH_CONFIG 0x00ac #define CMD_SET_BOOT2_VER 0x00a5 #define CMD_FUNC_INIT 0x00a9 #define CMD_FUNC_SHUTDOWN 0x00aa #define CMD_802_11_BEACON_CTRL 0x00b0 /* For the IEEE Power Save */ #define PS_MODE_ACTION_ENTER_PS 0x0030 #define PS_MODE_ACTION_EXIT_PS 0x0031 #define PS_MODE_ACTION_SLEEP_CONFIRMED 0x0034 #define CMD_ENABLE_RSN 0x0001 #define CMD_DISABLE_RSN 0x0000 #define CMD_ACT_GET 0x0000 #define CMD_ACT_SET 0x0001 /* Define action or option for CMD_802_11_SET_WEP */ #define CMD_ACT_ADD 0x0002 #define CMD_ACT_REMOVE 0x0004 #define CMD_TYPE_WEP_40_BIT 0x01 #define CMD_TYPE_WEP_104_BIT 0x02 #define CMD_NUM_OF_WEP_KEYS 4 #define CMD_WEP_KEY_INDEX_MASK 0x3fff /* Define action or option for CMD_802_11_SCAN */ #define CMD_BSS_TYPE_BSS 0x0001 #define CMD_BSS_TYPE_IBSS 0x0002 #define CMD_BSS_TYPE_ANY 0x0003 /* Define action or option for CMD_802_11_SCAN */ #define CMD_SCAN_TYPE_ACTIVE 0x0000 #define CMD_SCAN_TYPE_PASSIVE 0x0001 #define CMD_SCAN_RADIO_TYPE_BG 0 #define CMD_SCAN_PROBE_DELAY_TIME 0 /* Define action or option for CMD_MAC_CONTROL */ #define CMD_ACT_MAC_RX_ON 0x0001 #define CMD_ACT_MAC_TX_ON 0x0002 #define CMD_ACT_MAC_LOOPBACK_ON 0x0004 #define CMD_ACT_MAC_WEP_ENABLE 0x0008 #define CMD_ACT_MAC_INT_ENABLE 0x0010 #define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020 #define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040 #define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080 #define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100 #define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400 /* Event flags for CMD_802_11_SUBSCRIBE_EVENT */ #define CMD_SUBSCRIBE_RSSI_LOW 0x0001 #define CMD_SUBSCRIBE_SNR_LOW 0x0002 #define CMD_SUBSCRIBE_FAILCOUNT 0x0004 #define CMD_SUBSCRIBE_BCNMISS 0x0008 #define CMD_SUBSCRIBE_RSSI_HIGH 0x0010 #define CMD_SUBSCRIBE_SNR_HIGH 0x0020 #define RADIO_PREAMBLE_LONG 0x00 #define RADIO_PREAMBLE_SHORT 0x02 #define RADIO_PREAMBLE_AUTO 0x04 /* Define action or option for CMD_802_11_RF_CHANNEL */ #define CMD_OPT_802_11_RF_CHANNEL_GET 0x00 #define CMD_OPT_802_11_RF_CHANNEL_SET 0x01 /* Define action or option for CMD_802_11_DATA_RATE */ #define CMD_ACT_SET_TX_AUTO 0x0000 #define CMD_ACT_SET_TX_FIX_RATE 0x0001 #define CMD_ACT_GET_TX_RATE 0x0002 /* Options for CMD_802_11_FW_WAKE_METHOD */ #define CMD_WAKE_METHOD_UNCHANGED 0x0000 #define CMD_WAKE_METHOD_COMMAND_INT 0x0001 #define CMD_WAKE_METHOD_GPIO 0x0002 /* Object IDs for CMD_802_11_SNMP_MIB */ #define SNMP_MIB_OID_BSS_TYPE 0x0000 #define SNMP_MIB_OID_OP_RATE_SET 0x0001 #define SNMP_MIB_OID_BEACON_PERIOD 0x0002 /* Reserved on v9+ */ #define SNMP_MIB_OID_DTIM_PERIOD 0x0003 /* Reserved on v9+ */ #define SNMP_MIB_OID_ASSOC_TIMEOUT 0x0004 /* Reserved on v9+ */ #define SNMP_MIB_OID_RTS_THRESHOLD 0x0005 #define SNMP_MIB_OID_SHORT_RETRY_LIMIT 0x0006 #define SNMP_MIB_OID_LONG_RETRY_LIMIT 0x0007 #define SNMP_MIB_OID_FRAG_THRESHOLD 0x0008 #define SNMP_MIB_OID_11D_ENABLE 0x0009 #define SNMP_MIB_OID_11H_ENABLE 0x000A /* Define action or option for CMD_BT_ACCESS */ enum cmd_bt_access_opts { /* The bt commands start at 5 instead of 1 because the old dft commands * are mapped to 1-4. These old commands are no longer maintained and * should not be called. */ CMD_ACT_BT_ACCESS_ADD = 5, CMD_ACT_BT_ACCESS_DEL, CMD_ACT_BT_ACCESS_LIST, CMD_ACT_BT_ACCESS_RESET, CMD_ACT_BT_ACCESS_SET_INVERT, CMD_ACT_BT_ACCESS_GET_INVERT }; /* Define action or option for CMD_FWT_ACCESS */ enum cmd_fwt_access_opts { CMD_ACT_FWT_ACCESS_ADD = 1, CMD_ACT_FWT_ACCESS_DEL, CMD_ACT_FWT_ACCESS_LOOKUP, CMD_ACT_FWT_ACCESS_LIST, CMD_ACT_FWT_ACCESS_LIST_ROUTE, CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR, CMD_ACT_FWT_ACCESS_RESET, CMD_ACT_FWT_ACCESS_CLEANUP, CMD_ACT_FWT_ACCESS_TIME, }; /* Define action or option for CMD_802_11_HOST_SLEEP_CFG */ enum cmd_wol_cfg_opts { CMD_ACT_ACTION_NONE = 0, CMD_ACT_SET_WOL_RULE, CMD_ACT_GET_WOL_RULE, CMD_ACT_RESET_WOL_RULE, }; /* Define action or option for CMD_MESH_ACCESS */ enum cmd_mesh_access_opts { CMD_ACT_MESH_GET_TTL = 1, CMD_ACT_MESH_SET_TTL, CMD_ACT_MESH_GET_STATS, CMD_ACT_MESH_GET_ANYCAST, CMD_ACT_MESH_SET_ANYCAST, CMD_ACT_MESH_SET_LINK_COSTS, CMD_ACT_MESH_GET_LINK_COSTS, CMD_ACT_MESH_SET_BCAST_RATE, CMD_ACT_MESH_GET_BCAST_RATE, CMD_ACT_MESH_SET_RREQ_DELAY, CMD_ACT_MESH_GET_RREQ_DELAY, CMD_ACT_MESH_SET_ROUTE_EXP, CMD_ACT_MESH_GET_ROUTE_EXP, CMD_ACT_MESH_SET_AUTOSTART_ENABLED, CMD_ACT_MESH_GET_AUTOSTART_ENABLED, CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17, }; /* Define actions and types for CMD_MESH_CONFIG */ enum cmd_mesh_config_actions { CMD_ACT_MESH_CONFIG_STOP = 0, CMD_ACT_MESH_CONFIG_START, CMD_ACT_MESH_CONFIG_SET, CMD_ACT_MESH_CONFIG_GET, }; enum cmd_mesh_config_types { CMD_TYPE_MESH_SET_BOOTFLAG = 1, CMD_TYPE_MESH_SET_BOOTTIME, CMD_TYPE_MESH_SET_DEF_CHANNEL, CMD_TYPE_MESH_SET_MESH_IE, CMD_TYPE_MESH_GET_DEFAULTS, CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */ }; /* Card Event definition */ #define MACREG_INT_CODE_TX_PPA_FREE 0 #define MACREG_INT_CODE_TX_DMA_DONE 1 #define MACREG_INT_CODE_LINK_LOST_W_SCAN 2 #define MACREG_INT_CODE_LINK_LOST_NO_SCAN 3 #define MACREG_INT_CODE_LINK_SENSED 4 #define MACREG_INT_CODE_CMD_FINISHED 5 #define MACREG_INT_CODE_MIB_CHANGED 6 #define MACREG_INT_CODE_INIT_DONE 7 #define MACREG_INT_CODE_DEAUTHENTICATED 8 #define MACREG_INT_CODE_DISASSOCIATED 9 #define MACREG_INT_CODE_PS_AWAKE 10 #define MACREG_INT_CODE_PS_SLEEP 11 #define MACREG_INT_CODE_MIC_ERR_MULTICAST 13 #define MACREG_INT_CODE_MIC_ERR_UNICAST 14 #define MACREG_INT_CODE_WM_AWAKE 15 #define MACREG_INT_CODE_DEEP_SLEEP_AWAKE 16 #define MACREG_INT_CODE_ADHOC_BCN_LOST 17 #define MACREG_INT_CODE_HOST_AWAKE 18 #define MACREG_INT_CODE_STOP_TX 19 #define MACREG_INT_CODE_START_TX 20 #define MACREG_INT_CODE_CHANNEL_SWITCH 21 #define MACREG_INT_CODE_MEASUREMENT_RDY 22 #define MACREG_INT_CODE_WMM_CHANGE 23 #define MACREG_INT_CODE_BG_SCAN_REPORT 24 #define MACREG_INT_CODE_RSSI_LOW 25 #define MACREG_INT_CODE_SNR_LOW 26 #define MACREG_INT_CODE_MAX_FAIL 27 #define MACREG_INT_CODE_RSSI_HIGH 28 #define MACREG_INT_CODE_SNR_HIGH 29 #define MACREG_INT_CODE_MESH_AUTO_STARTED 35 #define MACREG_INT_CODE_FIRMWARE_READY 48 /* 802.11-related definitions */ /* TxPD descriptor */ struct txpd { /* union to cope up with later FW revisions */ union { /* Current Tx packet status */ __le32 tx_status; struct { /* BSS type: client, AP, etc. */ u8 bss_type; /* BSS number */ u8 bss_num; /* Reserved */ __le16 reserved; } bss; } u; /* Tx control */ __le32 tx_control; __le32 tx_packet_location; /* Tx packet length */ __le16 tx_packet_length; struct_group_attr(tx_dest_addr, __packed, /* First 2 byte of destination MAC address */ u8 tx_dest_addr_high[2]; /* Last 4 byte of destination MAC address */ u8 tx_dest_addr_low[4]; ); /* Pkt Priority */ u8 priority; /* Pkt Trasnit Power control */ u8 powermgmt; /* Amount of time the packet has been queued (units = 2ms) */ u8 pktdelay_2ms; /* reserved */ u8 reserved1; } __packed; /* RxPD Descriptor */ struct rxpd { /* union to cope up with later FW revisions */ union { /* Current Rx packet status */ __le16 status; struct { /* BSS type: client, AP, etc. */ u8 bss_type; /* BSS number */ u8 bss_num; } __packed bss; } __packed u; /* SNR */ u8 snr; /* Tx control */ u8 rx_control; /* Pkt length */ __le16 pkt_len; /* Noise Floor */ u8 nf; /* Rx Packet Rate */ u8 rx_rate; /* Pkt addr */ __le32 pkt_ptr; /* Next Rx RxPD addr */ __le32 next_rxpd_ptr; /* Pkt Priority */ u8 priority; u8 reserved[3]; } __packed; struct cmd_header { __le16 command; __le16 size; __le16 seqnum; __le16 result; } __packed; /* Generic structure to hold all key types. */ struct enc_key { u16 len; u16 flags; /* KEY_INFO_* from defs.h */ u16 type; /* KEY_TYPE_* from defs.h */ u8 key[32]; }; /* lbs_offset_value */ struct lbs_offset_value { u32 offset; u32 value; } __packed; #define MAX_11D_TRIPLETS 83 struct mrvl_ie_domain_param_set { struct mrvl_ie_header header; u8 country_code[IEEE80211_COUNTRY_STRING_LEN]; struct ieee80211_country_ie_triplet triplet[MAX_11D_TRIPLETS]; } __packed; struct cmd_ds_802_11d_domain_info { struct cmd_header hdr; __le16 action; struct mrvl_ie_domain_param_set domain; } __packed; /* * Define data structure for CMD_GET_HW_SPEC * This structure defines the response for the GET_HW_SPEC command */ struct cmd_ds_get_hw_spec { struct cmd_header hdr; /* HW Interface version number */ __le16 hwifversion; /* HW version number */ __le16 version; /* Max number of TxPD FW can handle */ __le16 nr_txpd; /* Max no of Multicast address */ __le16 nr_mcast_adr; /* MAC address */ u8 permanentaddr[6]; /* region Code */ __le16 regioncode; /* Number of antenna used */ __le16 nr_antenna; /* FW release number, example 0x01030304 = 2.3.4p1 */ __le32 fwrelease; /* Base Address of TxPD queue */ __le32 wcb_base; /* Read Pointer of RxPd queue */ __le32 rxpd_rdptr; /* Write Pointer of RxPd queue */ __le32 rxpd_wrptr; /*FW/HW capability */ __le32 fwcapinfo; } __packed; struct cmd_ds_802_11_subscribe_event { struct cmd_header hdr; __le16 action; __le16 events; /* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a * number of TLVs. From the v5.1 manual, those TLVs would add up to * 40 bytes. However, future firmware might add additional TLVs, so I * bump this up a bit. */ uint8_t tlv[128]; } __packed; /* * This scan handle Country Information IE(802.11d compliant) * Define data structure for CMD_802_11_SCAN */ struct cmd_ds_802_11_scan { struct cmd_header hdr; uint8_t bsstype; uint8_t bssid[ETH_ALEN]; uint8_t tlvbuffer[]; } __packed; struct cmd_ds_802_11_scan_rsp { struct cmd_header hdr; __le16 bssdescriptsize; uint8_t nr_sets; uint8_t bssdesc_and_tlvbuffer[]; } __packed; struct cmd_ds_802_11_get_log { struct cmd_header hdr; __le32 mcasttxframe; __le32 failed; __le32 retry; __le32 multiretry; __le32 framedup; __le32 rtssuccess; __le32 rtsfailure; __le32 ackfailure; __le32 rxfrag; __le32 mcastrxframe; __le32 fcserror; __le32 txframe; __le32 wepundecryptable; } __packed; struct cmd_ds_mac_control { struct cmd_header hdr; __le16 action; u16 reserved; } __packed; struct cmd_ds_mac_multicast_adr { struct cmd_header hdr; __le16 action; __le16 nr_of_adrs; u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE]; } __packed; struct cmd_ds_802_11_authenticate { struct cmd_header hdr; u8 bssid[ETH_ALEN]; u8 authtype; u8 reserved[10]; } __packed; struct cmd_ds_802_11_deauthenticate { struct cmd_header hdr; u8 macaddr[ETH_ALEN]; __le16 reasoncode; } __packed; struct cmd_ds_802_11_associate { struct cmd_header hdr; u8 bssid[6]; __le16 capability; __le16 listeninterval; __le16 bcnperiod; u8 dtimperiod; /* 512 permitted - enough for required and most optional IEs */ u8 iebuf[]; } __packed; struct cmd_ds_802_11_associate_response { struct cmd_header hdr; __le16 capability; __le16 statuscode; __le16 aid; /* max 512 */ u8 iebuf[]; } __packed; struct cmd_ds_802_11_set_wep { struct cmd_header hdr; /* ACT_ADD, ACT_REMOVE or ACT_ENABLE */ __le16 action; /* key Index selected for Tx */ __le16 keyindex; /* 40, 128bit or TXWEP */ uint8_t keytype[4]; uint8_t keymaterial[4][16]; } __packed; struct cmd_ds_802_11_snmp_mib { struct cmd_header hdr; __le16 action; __le16 oid; __le16 bufsize; u8 value[128]; } __packed; struct cmd_ds_reg_access { struct cmd_header hdr; __le16 action; __le16 offset; union { u8 bbp_rf; /* for BBP and RF registers */ __le32 mac; /* for MAC registers */ } value; } __packed; struct cmd_ds_802_11_radio_control { struct cmd_header hdr; __le16 action; __le16 control; } __packed; struct cmd_ds_802_11_beacon_control { struct cmd_header hdr; __le16 action; __le16 beacon_enable; __le16 beacon_period; } __packed; struct cmd_ds_802_11_sleep_params { struct cmd_header hdr; /* ACT_GET/ACT_SET */ __le16 action; /* Sleep clock error in ppm */ __le16 error; /* Wakeup offset in usec */ __le16 offset; /* Clock stabilization time in usec */ __le16 stabletime; /* control periodic calibration */ uint8_t calcontrol; /* control the use of external sleep clock */ uint8_t externalsleepclk; /* reserved field, should be set to zero */ __le16 reserved; } __packed; struct cmd_ds_802_11_rf_channel { struct cmd_header hdr; __le16 action; __le16 channel; __le16 rftype; /* unused */ __le16 reserved; /* unused */ u8 channellist[32]; /* unused */ } __packed; struct cmd_ds_802_11_rssi { struct cmd_header hdr; /* * request: number of beacons (N) to average the SNR and NF over * response: SNR of most recent beacon */ __le16 n_or_snr; /* * The following fields are only set in the response. * In the request these are reserved and should be set to 0. */ __le16 nf; /* most recent beacon noise floor */ __le16 avg_snr; /* average SNR weighted by N from request */ __le16 avg_nf; /* average noise floor weighted by N from request */ } __packed; struct cmd_ds_802_11_mac_address { struct cmd_header hdr; __le16 action; u8 macadd[ETH_ALEN]; } __packed; struct cmd_ds_802_11_rf_tx_power { struct cmd_header hdr; __le16 action; __le16 curlevel; s8 maxlevel; s8 minlevel; } __packed; /* MONITOR_MODE only exists in OLPC v5 firmware */ struct cmd_ds_802_11_monitor_mode { struct cmd_header hdr; __le16 action; __le16 mode; } __packed; struct cmd_ds_set_boot2_ver { struct cmd_header hdr; __le16 action; __le16 version; } __packed; struct cmd_ds_802_11_fw_wake_method { struct cmd_header hdr; __le16 action; __le16 method; } __packed; struct cmd_ds_802_11_ps_mode { struct cmd_header hdr; __le16 action; /* * Interval for keepalive in PS mode: * 0x0000 = don't change * 0x001E = firmware default * 0xFFFF = disable */ __le16 nullpktinterval; /* * Number of DTIM intervals to wake up for: * 0 = don't change * 1 = firmware default * 5 = max */ __le16 multipledtim; __le16 reserved; __le16 locallisteninterval; /* * AdHoc awake period (FW v9+ only): * 0 = don't change * 1 = always awake (IEEE standard behavior) * 2 - 31 = sleep for (n - 1) periods and awake for 1 period * 32 - 254 = invalid * 255 = sleep at each ATIM */ __le16 adhoc_awake_period; } __packed; struct cmd_confirm_sleep { struct cmd_header hdr; __le16 action; __le16 nullpktinterval; __le16 multipledtim; __le16 reserved; __le16 locallisteninterval; } __packed; struct cmd_ds_802_11_data_rate { struct cmd_header hdr; __le16 action; __le16 reserved; u8 rates[MAX_RATES]; } __packed; struct cmd_ds_802_11_rate_adapt_rateset { struct cmd_header hdr; __le16 action; __le16 enablehwauto; __le16 bitmap; } __packed; struct cmd_ds_802_11_ad_hoc_start { struct cmd_header hdr; u8 ssid[IEEE80211_MAX_SSID_LEN]; u8 bsstype; __le16 beaconperiod; u8 dtimperiod; /* Reserved on v9 and later */ struct ieee_ie_ibss_param_set ibss; u8 reserved1[4]; struct ieee_ie_ds_param_set ds; u8 reserved2[4]; __le16 probedelay; /* Reserved on v9 and later */ __le16 capability; u8 rates[MAX_RATES]; u8 tlv_memory_size_pad[100]; } __packed; struct cmd_ds_802_11_ad_hoc_result { struct cmd_header hdr; u8 pad[3]; u8 bssid[ETH_ALEN]; } __packed; struct adhoc_bssdesc { u8 bssid[ETH_ALEN]; u8 ssid[IEEE80211_MAX_SSID_LEN]; u8 type; __le16 beaconperiod; u8 dtimperiod; __le64 timestamp; __le64 localtime; struct ieee_ie_ds_param_set ds; u8 reserved1[4]; struct ieee_ie_ibss_param_set ibss; u8 reserved2[4]; __le16 capability; u8 rates[MAX_RATES]; /* * DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the * Adhoc join command and will cause a binary layout mismatch with * the firmware */ } __packed; struct cmd_ds_802_11_ad_hoc_join { struct cmd_header hdr; struct adhoc_bssdesc bss; __le16 failtimeout; /* Reserved on v9 and later */ __le16 probedelay; /* Reserved on v9 and later */ } __packed; struct cmd_ds_802_11_ad_hoc_stop { struct cmd_header hdr; } __packed; struct cmd_ds_802_11_enable_rsn { struct cmd_header hdr; __le16 action; __le16 enable; } __packed; struct MrvlIEtype_keyParamSet { /* type ID */ __le16 type; /* length of Payload */ __le16 length; /* type of key: WEP=0, TKIP=1, AES=2 */ __le16 keytypeid; /* key control Info specific to a keytypeid */ __le16 keyinfo; /* length of key */ __le16 keylen; /* key material of size keylen */ u8 key[32]; } __packed; #define MAX_WOL_RULES 16 struct host_wol_rule { uint8_t rule_no; uint8_t rule_ops; __le16 sig_offset; __le16 sig_length; __le16 reserve; __be32 sig_mask; __be32 signature; } __packed; struct wol_config { uint8_t action; uint8_t pattern; uint8_t no_rules_in_cmd; uint8_t result; struct host_wol_rule rule[MAX_WOL_RULES]; } __packed; struct cmd_ds_host_sleep { struct cmd_header hdr; __le32 criteria; uint8_t gpio; uint16_t gap; struct wol_config wol_conf; } __packed; struct cmd_ds_802_11_key_material { struct cmd_header hdr; __le16 action; struct MrvlIEtype_keyParamSet keyParamSet[2]; } __packed; struct cmd_ds_802_11_eeprom_access { struct cmd_header hdr; __le16 action; __le16 offset; __le16 len; /* firmware says it returns a maximum of 20 bytes */ #define LBS_EEPROM_READ_LEN 20 u8 value[LBS_EEPROM_READ_LEN]; } __packed; struct cmd_ds_802_11_tpc_cfg { struct cmd_header hdr; __le16 action; uint8_t enable; int8_t P0; int8_t P1; int8_t P2; uint8_t usesnr; } __packed; struct cmd_ds_802_11_pa_cfg { struct cmd_header hdr; __le16 action; uint8_t enable; int8_t P0; int8_t P1; int8_t P2; } __packed; struct cmd_ds_802_11_led_ctrl { struct cmd_header hdr; __le16 action; __le16 numled; u8 data[256]; } __packed; /* Automatic Frequency Control */ struct cmd_ds_802_11_afc { struct cmd_header hdr; __le16 afc_auto; union { struct { __le16 threshold; __le16 period; }; struct { __le16 timing_offset; /* signed */ __le16 carrier_offset; /* signed */ }; }; } __packed; struct cmd_tx_rate_query { __le16 txrate; } __packed; struct cmd_ds_get_tsf { __le64 tsfvalue; } __packed; struct cmd_ds_bt_access { struct cmd_header hdr; __le16 action; __le32 id; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; } __packed; struct cmd_ds_fwt_access { struct cmd_header hdr; __le16 action; __le32 id; u8 valid; u8 da[ETH_ALEN]; u8 dir; u8 ra[ETH_ALEN]; __le32 ssn; __le32 dsn; __le32 metric; u8 rate; u8 hopcount; u8 ttl; __le32 expiration; u8 sleepmode; __le32 snr; __le32 references; u8 prec[ETH_ALEN]; } __packed; struct cmd_ds_mesh_config { struct cmd_header hdr; __le16 action; __le16 channel; __le16 type; __le16 length; u8 data[128]; /* last position reserved */ } __packed; struct cmd_ds_mesh_access { struct cmd_header hdr; __le16 action; __le32 data[32]; /* last position reserved */ } __packed; /* Number of stats counters returned by the firmware */ #define MESH_STATS_NUM 8 #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1