| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Igor Mitsyanko | 2644 | 77.04% | 31 | 46.97% |
| Sergey Matyukevich | 485 | 14.13% | 22 | 33.33% |
| Mikhail Karpenko | 135 | 3.93% | 3 | 4.55% |
| Vasily Ulyanov | 85 | 2.48% | 3 | 4.55% |
| Sergei Maksimenko | 36 | 1.05% | 1 | 1.52% |
| Gustavo A. R. Silva | 27 | 0.79% | 1 | 1.52% |
| Andrey Shevchenko | 15 | 0.44% | 3 | 4.55% |
| Dmitry Lebed | 4 | 0.12% | 1 | 1.52% |
| Jilin Yuan | 1 | 0.03% | 1 | 1.52% |
| Total | 3432 | 66 |
/* SPDX-License-Identifier: GPL-2.0+ */ /* Copyright (c) 2015-2016 Quantenna Communications. All rights reserved. */ #ifndef _QTN_QLINK_H_ #define _QTN_QLINK_H_ #include <linux/ieee80211.h> #define QLINK_PROTO_VER_MAJOR_M 0xFFFF #define QLINK_PROTO_VER_MAJOR_S 16 #define QLINK_PROTO_VER_MINOR_M 0xFFFF #define QLINK_VER_MINOR(_ver) ((_ver) & QLINK_PROTO_VER_MINOR_M) #define QLINK_VER_MAJOR(_ver) \ (((_ver) >> QLINK_PROTO_VER_MAJOR_S) & QLINK_PROTO_VER_MAJOR_M) #define QLINK_VER(_maj, _min) (((_maj) << QLINK_PROTO_VER_MAJOR_S) | (_min)) #define QLINK_PROTO_VER_MAJOR 18 #define QLINK_PROTO_VER_MINOR 1 #define QLINK_PROTO_VER \ QLINK_VER(QLINK_PROTO_VER_MAJOR, QLINK_PROTO_VER_MINOR) #define QLINK_ALIGN 4 #define QLINK_MACID_RSVD 0xFF #define QLINK_VIFID_RSVD 0xFF /* Common QLINK protocol messages definitions. */ /** * enum qlink_msg_type - QLINK message types * * Used to distinguish between message types of QLINK protocol. * * @QLINK_MSG_TYPE_CMD: Message is carrying data of a command sent from * driver to wireless hardware. * @QLINK_MSG_TYPE_CMDRSP: Message is carrying data of a response to a command. * Sent from wireless HW to driver in reply to previously issued command. * @QLINK_MSG_TYPE_EVENT: Data for an event originated in wireless hardware and * sent asynchronously to driver. */ enum qlink_msg_type { QLINK_MSG_TYPE_CMD = 1, QLINK_MSG_TYPE_CMDRSP = 2, QLINK_MSG_TYPE_EVENT = 3 }; /** * struct qlink_msg_header - common QLINK protocol message header * * Portion of QLINK protocol header common for all message types. * * @type: Message type, one of &enum qlink_msg_type. * @len: Total length of message including all headers. */ struct qlink_msg_header { __le16 type; __le16 len; } __packed; /* Generic definitions of data and information carried in QLINK messages */ /** * enum qlink_hw_capab - device capabilities. * * @QLINK_HW_CAPAB_REG_UPDATE: device can update it's regulatory region. * @QLINK_HW_CAPAB_STA_INACT_TIMEOUT: device implements a logic to kick-out * associated STAs due to inactivity. Inactivity timeout period is taken * from QLINK_CMD_START_AP parameters. * @QLINK_HW_CAPAB_DFS_OFFLOAD: device implements DFS offload functionality * @QLINK_HW_CAPAB_SCAN_RANDOM_MAC_ADDR: device supports MAC Address * Randomization in probe requests. * @QLINK_HW_CAPAB_OBSS_SCAN: device can perform OBSS scanning. * @QLINK_HW_CAPAB_HW_BRIDGE: device has hardware switch capabilities. */ enum qlink_hw_capab { QLINK_HW_CAPAB_REG_UPDATE = 0, QLINK_HW_CAPAB_STA_INACT_TIMEOUT, QLINK_HW_CAPAB_DFS_OFFLOAD, QLINK_HW_CAPAB_SCAN_RANDOM_MAC_ADDR, QLINK_HW_CAPAB_PWR_MGMT, QLINK_HW_CAPAB_OBSS_SCAN, QLINK_HW_CAPAB_SCAN_DWELL, QLINK_HW_CAPAB_SAE, QLINK_HW_CAPAB_HW_BRIDGE, QLINK_HW_CAPAB_NUM }; /** * enum qlink_driver_capab - host driver capabilities. * */ enum qlink_driver_capab { QLINK_DRV_CAPAB_NUM = 0 }; enum qlink_iface_type { QLINK_IFTYPE_AP = 1, QLINK_IFTYPE_STATION = 2, QLINK_IFTYPE_ADHOC = 3, QLINK_IFTYPE_MONITOR = 4, QLINK_IFTYPE_WDS = 5, QLINK_IFTYPE_AP_VLAN = 6, }; /** * struct qlink_intf_info - information on virtual interface. * * Data describing a single virtual interface. * * @if_type: Mode of interface operation, one of &enum qlink_iface_type * @vlanid: VLAN ID for AP_VLAN interface type * @mac_addr: MAC address of virtual interface. */ struct qlink_intf_info { __le16 if_type; __le16 vlanid; u8 mac_addr[ETH_ALEN]; u8 use4addr; u8 rsvd[1]; } __packed; enum qlink_sta_flags { QLINK_STA_FLAG_INVALID = 0, QLINK_STA_FLAG_AUTHORIZED = BIT(0), QLINK_STA_FLAG_SHORT_PREAMBLE = BIT(1), QLINK_STA_FLAG_WME = BIT(2), QLINK_STA_FLAG_MFP = BIT(3), QLINK_STA_FLAG_AUTHENTICATED = BIT(4), QLINK_STA_FLAG_TDLS_PEER = BIT(5), QLINK_STA_FLAG_ASSOCIATED = BIT(6), }; enum qlink_channel_width { QLINK_CHAN_WIDTH_5 = 0, QLINK_CHAN_WIDTH_10, QLINK_CHAN_WIDTH_20_NOHT, QLINK_CHAN_WIDTH_20, QLINK_CHAN_WIDTH_40, QLINK_CHAN_WIDTH_80, QLINK_CHAN_WIDTH_80P80, QLINK_CHAN_WIDTH_160, }; /** * struct qlink_channel - qlink control channel definition * * @hw_value: hardware-specific value for the channel * @center_freq: center frequency in MHz * @flags: channel flags from &enum qlink_channel_flags * @band: band this channel belongs to * @max_antenna_gain: maximum antenna gain in dBi * @max_power: maximum transmission power (in dBm) * @max_reg_power: maximum regulatory transmission power (in dBm) * @dfs_state: current state of this channel. * Only relevant if radar is required on this channel. * @beacon_found: helper to regulatory code to indicate when a beacon * has been found on this channel. Use regulatory_hint_found_beacon() * to enable this, this is useful only on 5 GHz band. */ struct qlink_channel { __le16 hw_value; __le16 center_freq; __le32 flags; u8 band; u8 max_antenna_gain; u8 max_power; u8 max_reg_power; __le32 dfs_cac_ms; u8 dfs_state; u8 beacon_found; u8 rsvd[2]; } __packed; /** * struct qlink_chandef - qlink channel definition * * @chan: primary channel definition * @center_freq1: center frequency of first segment * @center_freq2: center frequency of second segment (80+80 only) * @width: channel width, one of @enum qlink_channel_width */ struct qlink_chandef { struct qlink_channel chan; __le16 center_freq1; __le16 center_freq2; u8 width; u8 rsvd[3]; } __packed; #define QLINK_MAX_NR_CIPHER_SUITES 5 #define QLINK_MAX_NR_AKM_SUITES 2 struct qlink_auth_encr { __le32 wpa_versions; __le32 cipher_group; __le32 n_ciphers_pairwise; __le32 ciphers_pairwise[QLINK_MAX_NR_CIPHER_SUITES]; __le32 n_akm_suites; __le32 akm_suites[QLINK_MAX_NR_AKM_SUITES]; __le16 control_port_ethertype; u8 auth_type; u8 privacy; u8 control_port; u8 control_port_no_encrypt; u8 rsvd[2]; } __packed; /** * struct qlink_sta_info_state - station flags mask/value * * @mask: STA flags mask, bitmap of &enum qlink_sta_flags * @value: STA flags values, bitmap of &enum qlink_sta_flags */ struct qlink_sta_info_state { __le32 mask; __le32 value; } __packed; /** * enum qlink_sr_ctrl_flags - control flags for spatial reuse parameter set * * @QLINK_SR_PSR_DISALLOWED: indicates whether or not PSR-based spatial reuse * transmissions are allowed for STAs associated with the AP * @QLINK_SR_NON_SRG_OBSS_PD_SR_DISALLOWED: indicates whether or not * Non-SRG OBSS PD spatial reuse transmissions are allowed for STAs associated * with the AP * @NON_SRG_OFFSET_PRESENT: indicates whether or not Non-SRG OBSS PD Max offset * field is valid in the element * @QLINK_SR_SRG_INFORMATION_PRESENT: indicates whether or not SRG OBSS PD * Min/Max offset fields ore valid in the element */ enum qlink_sr_ctrl_flags { QLINK_SR_PSR_DISALLOWED = BIT(0), QLINK_SR_NON_SRG_OBSS_PD_SR_DISALLOWED = BIT(1), QLINK_SR_NON_SRG_OFFSET_PRESENT = BIT(2), QLINK_SR_SRG_INFORMATION_PRESENT = BIT(3), }; /** * struct qlink_sr_params - spatial reuse parameters * * @sr_control: spatial reuse control field; flags contained in this field are * defined in @qlink_sr_ctrl_flags * @non_srg_obss_pd_max: added to -82 dBm to generate the value of the * Non-SRG OBSS PD Max parameter * @srg_obss_pd_min_offset: added to -82 dBm to generate the value of the * SRG OBSS PD Min parameter * @srg_obss_pd_max_offset: added to -82 dBm to generate the value of the * SRG PBSS PD Max parameter */ struct qlink_sr_params { u8 sr_control; u8 non_srg_obss_pd_max; u8 srg_obss_pd_min_offset; u8 srg_obss_pd_max_offset; } __packed; /* QLINK Command messages related definitions */ /** * enum qlink_cmd_type - list of supported commands * * Commands are QLINK messages of type @QLINK_MSG_TYPE_CMD, sent by driver to * wireless network device for processing. Device is expected to send back a * reply message of type &QLINK_MSG_TYPE_CMDRSP, containing at least command * execution status (one of &enum qlink_cmd_result). Reply message * may also contain data payload specific to the command type. * * @QLINK_CMD_SEND_FRAME: send specified frame over the air; firmware will * encapsulate 802.3 packet into 802.11 frame automatically. * @QLINK_CMD_BAND_INFO_GET: for the specified MAC and specified band, get * the band's description including number of operational channels and * info on each channel, HT/VHT capabilities, supported rates etc. * This command is generic to a specified MAC, interface index must be set * to QLINK_VIFID_RSVD in command header. * @QLINK_CMD_REG_NOTIFY: notify device about regulatory domain change. This * command is supported only if device reports QLINK_HW_SUPPORTS_REG_UPDATE * capability. * @QLINK_CMD_START_CAC: start radar detection procedure on a specified channel. * @QLINK_CMD_TXPWR: get or set current channel transmit power for * the specified MAC. * @QLINK_CMD_NDEV_EVENT: signalizes changes made with a corresponding network * device. */ enum qlink_cmd_type { QLINK_CMD_FW_INIT = 0x0001, QLINK_CMD_FW_DEINIT = 0x0002, QLINK_CMD_REGISTER_MGMT = 0x0003, QLINK_CMD_SEND_FRAME = 0x0004, QLINK_CMD_MGMT_SET_APPIE = 0x0005, QLINK_CMD_PHY_PARAMS_SET = 0x0012, QLINK_CMD_GET_HW_INFO = 0x0013, QLINK_CMD_MAC_INFO = 0x0014, QLINK_CMD_ADD_INTF = 0x0015, QLINK_CMD_DEL_INTF = 0x0016, QLINK_CMD_CHANGE_INTF = 0x0017, QLINK_CMD_UPDOWN_INTF = 0x0018, QLINK_CMD_REG_NOTIFY = 0x0019, QLINK_CMD_BAND_INFO_GET = 0x001A, QLINK_CMD_CHAN_SWITCH = 0x001B, QLINK_CMD_CHAN_GET = 0x001C, QLINK_CMD_START_CAC = 0x001D, QLINK_CMD_START_AP = 0x0021, QLINK_CMD_STOP_AP = 0x0022, QLINK_CMD_SET_MAC_ACL = 0x0023, QLINK_CMD_GET_STA_INFO = 0x0030, QLINK_CMD_ADD_KEY = 0x0040, QLINK_CMD_DEL_KEY = 0x0041, QLINK_CMD_SET_DEFAULT_KEY = 0x0042, QLINK_CMD_SET_DEFAULT_MGMT_KEY = 0x0043, QLINK_CMD_CHANGE_STA = 0x0051, QLINK_CMD_DEL_STA = 0x0052, QLINK_CMD_SCAN = 0x0053, QLINK_CMD_CHAN_STATS = 0x0054, QLINK_CMD_NDEV_EVENT = 0x0055, QLINK_CMD_CONNECT = 0x0060, QLINK_CMD_DISCONNECT = 0x0061, QLINK_CMD_PM_SET = 0x0062, QLINK_CMD_WOWLAN_SET = 0x0063, QLINK_CMD_EXTERNAL_AUTH = 0x0066, QLINK_CMD_TXPWR = 0x0067, QLINK_CMD_UPDATE_OWE = 0x0068, }; /** * struct qlink_cmd - QLINK command message header * * Header used for QLINK messages of QLINK_MSG_TYPE_CMD type. * * @mhdr: Common QLINK message header. * @cmd_id: command id, one of &enum qlink_cmd_type. * @seq_num: sequence number of command message, used for matching with * response message. * @macid: index of physical radio device the command is destined to or * QLINK_MACID_RSVD if not applicable. * @vifid: index of virtual wireless interface on specified @macid the command * is destined to or QLINK_VIFID_RSVD if not applicable. */ struct qlink_cmd { struct qlink_msg_header mhdr; __le16 cmd_id; __le16 seq_num; u8 macid; u8 vifid; u8 rsvd[2]; } __packed; /** * struct qlink_cmd_init_fw - data for QLINK_CMD_FW_INIT * * Initialize firmware based on specified host configuration. This is the first * command sent to wifi card and it's fixed part should never be changed, any * additions must be done by appending TLVs. * If wifi card can not operate with a specified parameters it will return * error. * * @qlink_proto_ver: QLINK protocol version used by host driver. */ struct qlink_cmd_init_fw { struct qlink_cmd chdr; __le32 qlink_proto_ver; u8 var_info[]; } __packed; /** * struct qlink_cmd_manage_intf - interface management command * * Data for interface management commands QLINK_CMD_ADD_INTF, QLINK_CMD_DEL_INTF * and QLINK_CMD_CHANGE_INTF. * * @intf_info: interface description. */ struct qlink_cmd_manage_intf { struct qlink_cmd chdr; struct qlink_intf_info intf_info; } __packed; enum qlink_mgmt_frame_type { QLINK_MGMT_FRAME_ASSOC_REQ = 0x00, QLINK_MGMT_FRAME_ASSOC_RESP = 0x01, QLINK_MGMT_FRAME_REASSOC_REQ = 0x02, QLINK_MGMT_FRAME_REASSOC_RESP = 0x03, QLINK_MGMT_FRAME_PROBE_REQ = 0x04, QLINK_MGMT_FRAME_PROBE_RESP = 0x05, QLINK_MGMT_FRAME_BEACON = 0x06, QLINK_MGMT_FRAME_ATIM = 0x07, QLINK_MGMT_FRAME_DISASSOC = 0x08, QLINK_MGMT_FRAME_AUTH = 0x09, QLINK_MGMT_FRAME_DEAUTH = 0x0A, QLINK_MGMT_FRAME_ACTION = 0x0B, QLINK_MGMT_FRAME_TYPE_COUNT }; /** * struct qlink_cmd_mgmt_frame_register - data for QLINK_CMD_REGISTER_MGMT * * @frame_type: MGMT frame type the registration request describes, one of * &enum qlink_mgmt_frame_type. * @do_register: 0 - unregister, otherwise register for reception of specified * MGMT frame type. */ struct qlink_cmd_mgmt_frame_register { struct qlink_cmd chdr; __le16 frame_type; u8 do_register; u8 rsvd[1]; } __packed; /** * @QLINK_FRAME_TX_FLAG_8023: frame has a 802.3 header; if not set, frame * is a 802.11 encapsulated. */ enum qlink_frame_tx_flags { QLINK_FRAME_TX_FLAG_OFFCHAN = BIT(0), QLINK_FRAME_TX_FLAG_NO_CCK = BIT(1), QLINK_FRAME_TX_FLAG_ACK_NOWAIT = BIT(2), QLINK_FRAME_TX_FLAG_8023 = BIT(3), }; /** * struct qlink_cmd_frame_tx - data for QLINK_CMD_SEND_FRAME command * * @cookie: opaque request identifier. * @freq: Frequency to use for frame transmission. * @flags: Transmission flags, one of &enum qlink_frame_tx_flags. * @frame_data: frame to transmit. */ struct qlink_cmd_frame_tx { struct qlink_cmd chdr; __le32 cookie; __le16 freq; __le16 flags; u8 frame_data[]; } __packed; /** * struct qlink_cmd_get_sta_info - data for QLINK_CMD_GET_STA_INFO command * * @sta_addr: MAC address of the STA statistics is requested for. */ struct qlink_cmd_get_sta_info { struct qlink_cmd chdr; u8 sta_addr[ETH_ALEN]; u8 rsvd[2]; } __packed; /** * struct qlink_cmd_add_key - data for QLINK_CMD_ADD_KEY command. * * @key_index: index of the key being installed. * @pairwise: whether to use pairwise key. * @addr: MAC address of a STA key is being installed to. * @cipher: cipher suite. * @vlanid: VLAN ID for AP_VLAN interface type * @key_data: key data itself. */ struct qlink_cmd_add_key { struct qlink_cmd chdr; u8 key_index; u8 pairwise; u8 addr[ETH_ALEN]; __le32 cipher; __le16 vlanid; u8 rsvd[2]; u8 key_data[]; } __packed; /** * struct qlink_cmd_del_key_req - data for QLINK_CMD_DEL_KEY command * * @key_index: index of the key being removed. * @pairwise: whether to use pairwise key. * @addr: MAC address of a STA for which a key is removed. */ struct qlink_cmd_del_key { struct qlink_cmd chdr; u8 key_index; u8 pairwise; u8 addr[ETH_ALEN]; } __packed; /** * struct qlink_cmd_set_def_key - data for QLINK_CMD_SET_DEFAULT_KEY command * * @key_index: index of the key to be set as default one. * @unicast: key is unicast. * @multicast: key is multicast. */ struct qlink_cmd_set_def_key { struct qlink_cmd chdr; u8 key_index; u8 unicast; u8 multicast; u8 rsvd[1]; } __packed; /** * struct qlink_cmd_set_def_mgmt_key - data for QLINK_CMD_SET_DEFAULT_MGMT_KEY * * @key_index: index of the key to be set as default MGMT key. */ struct qlink_cmd_set_def_mgmt_key { struct qlink_cmd chdr; u8 key_index; u8 rsvd[3]; } __packed; /** * struct qlink_cmd_change_sta - data for QLINK_CMD_CHANGE_STA command * * @flag_update: STA flags to update * @if_type: Mode of interface operation, one of &enum qlink_iface_type * @vlanid: VLAN ID to assign to specific STA * @sta_addr: address of the STA for which parameters are set. */ struct qlink_cmd_change_sta { struct qlink_cmd chdr; struct qlink_sta_info_state flag_update; __le16 if_type; __le16 vlanid; u8 sta_addr[ETH_ALEN]; u8 rsvd[2]; } __packed; /** * struct qlink_cmd_del_sta - data for QLINK_CMD_DEL_STA command. * * See &struct station_del_parameters */ struct qlink_cmd_del_sta { struct qlink_cmd chdr; __le16 reason_code; u8 sta_addr[ETH_ALEN]; u8 subtype; u8 rsvd[3]; } __packed; enum qlink_sta_connect_flags { QLINK_STA_CONNECT_DISABLE_HT = BIT(0), QLINK_STA_CONNECT_DISABLE_VHT = BIT(1), QLINK_STA_CONNECT_USE_RRM = BIT(2), }; /** * struct qlink_cmd_connect - data for QLINK_CMD_CONNECT command * * @bssid: BSSID of the BSS to connect to. * @bssid_hint: recommended AP BSSID for initial connection to the BSS or * 00:00:00:00:00:00 if not specified. * @prev_bssid: previous BSSID, if specified (not 00:00:00:00:00:00) indicates * a request to reassociate. * @bg_scan_period: period of background scan. * @flags: one of &enum qlink_sta_connect_flags. * @ht_capa: HT Capabilities overrides. * @ht_capa_mask: The bits of ht_capa which are to be used. * @vht_capa: VHT Capability overrides * @vht_capa_mask: The bits of vht_capa which are to be used. * @aen: authentication information. * @mfp: whether to use management frame protection. * @payload: variable portion of connection request. */ struct qlink_cmd_connect { struct qlink_cmd chdr; u8 bssid[ETH_ALEN]; u8 bssid_hint[ETH_ALEN]; u8 prev_bssid[ETH_ALEN]; __le16 bg_scan_period; __le32 flags; struct ieee80211_ht_cap ht_capa; struct ieee80211_ht_cap ht_capa_mask; struct ieee80211_vht_cap vht_capa; struct ieee80211_vht_cap vht_capa_mask; struct qlink_auth_encr aen; u8 mfp; u8 pbss; u8 rsvd[2]; u8 payload[]; } __packed; /** * struct qlink_cmd_external_auth - data for QLINK_CMD_EXTERNAL_AUTH command * * @bssid: BSSID of the BSS to connect to * @status: authentication status code * @payload: variable portion of connection request. */ struct qlink_cmd_external_auth { struct qlink_cmd chdr; u8 peer[ETH_ALEN]; __le16 status; u8 payload[]; } __packed; /** * struct qlink_cmd_disconnect - data for QLINK_CMD_DISCONNECT command * * @reason: code of the reason of disconnect, see &enum ieee80211_reasoncode. */ struct qlink_cmd_disconnect { struct qlink_cmd chdr; __le16 reason; u8 rsvd[2]; } __packed; /** * struct qlink_cmd_updown - data for QLINK_CMD_UPDOWN_INTF command * * @if_up: bring specified interface DOWN (if_up==0) or UP (otherwise). * Interface is specified in common command header @chdr. */ struct qlink_cmd_updown { struct qlink_cmd chdr; u8 if_up; u8 rsvd[3]; } __packed; /** * enum qlink_band - a list of frequency bands * * @QLINK_BAND_2GHZ: 2.4GHz band * @QLINK_BAND_5GHZ: 5GHz band * @QLINK_BAND_60GHZ: 60GHz band */ enum qlink_band { QLINK_BAND_2GHZ = BIT(0), QLINK_BAND_5GHZ = BIT(1), QLINK_BAND_60GHZ = BIT(2), }; /** * struct qlink_cmd_band_info_get - data for QLINK_CMD_BAND_INFO_GET command * * @band: a PHY band for which information is queried, one of @enum qlink_band */ struct qlink_cmd_band_info_get { struct qlink_cmd chdr; u8 band; u8 rsvd[3]; } __packed; /** * struct qlink_cmd_get_chan_stats - data for QLINK_CMD_CHAN_STATS command * * @channel_freq: channel center frequency */ struct qlink_cmd_get_chan_stats { struct qlink_cmd chdr; __le32 channel_freq; } __packed; /** * enum qlink_reg_initiator - Indicates the initiator of a reg domain request * * See &enum nl80211_reg_initiator for more info. */ enum qlink_reg_initiator { QLINK_REGDOM_SET_BY_CORE, QLINK_REGDOM_SET_BY_USER, QLINK_REGDOM_SET_BY_DRIVER, QLINK_REGDOM_SET_BY_COUNTRY_IE, }; /** * enum qlink_user_reg_hint_type - type of user regulatory hint * * See &enum nl80211_user_reg_hint_type for more info. */ enum qlink_user_reg_hint_type { QLINK_USER_REG_HINT_USER = 0, QLINK_USER_REG_HINT_CELL_BASE = 1, QLINK_USER_REG_HINT_INDOOR = 2, }; /** * struct qlink_cmd_reg_notify - data for QLINK_CMD_REG_NOTIFY command * * @alpha2: the ISO / IEC 3166 alpha2 country code. * @initiator: which entity sent the request, one of &enum qlink_reg_initiator. * @user_reg_hint_type: type of hint for QLINK_REGDOM_SET_BY_USER request, one * of &enum qlink_user_reg_hint_type. * @num_channels: number of &struct qlink_tlv_channel in a variable portion of a * payload. * @dfs_region: one of &enum qlink_dfs_regions. * @slave_radar: whether slave device should enable radar detection. * @dfs_offload: enable or disable DFS offload to firmware. * @info: variable portion of regulatory notifier callback. */ struct qlink_cmd_reg_notify { struct qlink_cmd chdr; u8 alpha2[2]; u8 initiator; u8 user_reg_hint_type; u8 num_channels; u8 dfs_region; u8 slave_radar; u8 dfs_offload; u8 info[]; } __packed; /** * enum qlink_chan_sw_flags - channel switch control flags * * @QLINK_CHAN_SW_RADAR_REQUIRED: whether radar detection is required on a new * channel. * @QLINK_CHAN_SW_BLOCK_TX: whether transmissions should be blocked while * changing a channel. */ enum qlink_chan_sw_flags { QLINK_CHAN_SW_RADAR_REQUIRED = BIT(0), QLINK_CHAN_SW_BLOCK_TX = BIT(1), }; /** * struct qlink_cmd_chan_switch - data for QLINK_CMD_CHAN_SWITCH command * * @channel: channel to switch to. * @flags: flags to control channel switch, bitmap of &enum qlink_chan_sw_flags. * @beacon_count: number of beacons until switch */ struct qlink_cmd_chan_switch { struct qlink_cmd chdr; struct qlink_chandef channel; __le64 flags; __le32 n_counter_offsets_beacon; __le32 n_counter_offsets_presp; u8 beacon_count; u8 rsvd[3]; } __packed; /** * enum qlink_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID * * Refer to &enum nl80211_hidden_ssid */ enum qlink_hidden_ssid { QLINK_HIDDEN_SSID_NOT_IN_USE, QLINK_HIDDEN_SSID_ZERO_LEN, QLINK_HIDDEN_SSID_ZERO_CONTENTS }; /** * struct qlink_cmd_start_ap - data for QLINK_CMD_START_AP command * * @beacon_interval: beacon interval * @inactivity_timeout: station's inactivity period in seconds * @dtim_period: DTIM period * @hidden_ssid: whether to hide the SSID, one of &enum qlink_hidden_ssid * @smps_mode: SMPS mode * @ht_required: stations must support HT * @vht_required: stations must support VHT * @aen: encryption info * @sr_params: spatial reuse parameters * @twt_responder: enable Target Wake Time * @info: variable configurations */ struct qlink_cmd_start_ap { struct qlink_cmd chdr; __le16 beacon_interval; __le16 inactivity_timeout; u8 dtim_period; u8 hidden_ssid; u8 smps_mode; u8 p2p_ctwindow; u8 p2p_opp_ps; u8 pbss; u8 ht_required; u8 vht_required; struct qlink_auth_encr aen; struct qlink_sr_params sr_params; u8 twt_responder; u8 rsvd[3]; u8 info[]; } __packed; /** * struct qlink_cmd_start_cac - data for QLINK_CMD_START_CAC command * * @chan: a channel to start a radar detection procedure on. * @cac_time_ms: CAC time. */ struct qlink_cmd_start_cac { struct qlink_cmd chdr; struct qlink_chandef chan; __le32 cac_time_ms; } __packed; enum qlink_acl_policy { QLINK_ACL_POLICY_ACCEPT_UNLESS_LISTED, QLINK_ACL_POLICY_DENY_UNLESS_LISTED, }; struct qlink_mac_address { u8 addr[ETH_ALEN]; } __packed; /** * struct qlink_acl_data - ACL data * * @policy: filter policy, one of &enum qlink_acl_policy. * @num_entries: number of MAC addresses in array. * @mac_address: MAC addresses array. */ struct qlink_acl_data { __le32 policy; __le32 num_entries; struct qlink_mac_address mac_addrs[]; } __packed; /** * enum qlink_pm_mode - Power Management mode * * @QLINK_PM_OFF: normal mode, no power saving enabled * @QLINK_PM_AUTO_STANDBY: enable auto power save mode */ enum qlink_pm_mode { QLINK_PM_OFF = 0, QLINK_PM_AUTO_STANDBY = 1, }; /** * struct qlink_cmd_pm_set - data for QLINK_CMD_PM_SET command * * @pm_standby timer: period of network inactivity in seconds before * putting a radio in power save mode * @pm_mode: power management mode */ struct qlink_cmd_pm_set { struct qlink_cmd chdr; __le32 pm_standby_timer; u8 pm_mode; u8 rsvd[3]; } __packed; /** * enum qlink_txpwr_op - transmit power operation type * @QLINK_TXPWR_SET: set tx power * @QLINK_TXPWR_GET: get current tx power setting */ enum qlink_txpwr_op { QLINK_TXPWR_SET, QLINK_TXPWR_GET }; /** * struct qlink_cmd_txpwr - get or set current transmit power * * @txpwr: new transmit power setting, in mBm * @txpwr_setting: transmit power setting type, one of * &enum nl80211_tx_power_setting * @op_type: type of operation, one of &enum qlink_txpwr_op */ struct qlink_cmd_txpwr { struct qlink_cmd chdr; __le32 txpwr; u8 txpwr_setting; u8 op_type; u8 rsvd[2]; } __packed; /** * enum qlink_wowlan_trigger * * @QLINK_WOWLAN_TRIG_DISCONNECT: wakeup on disconnect * @QLINK_WOWLAN_TRIG_MAGIC_PKT: wakeup on magic packet * @QLINK_WOWLAN_TRIG_PATTERN_PKT: wakeup on user-defined packet */ enum qlink_wowlan_trigger { QLINK_WOWLAN_TRIG_DISCONNECT = BIT(0), QLINK_WOWLAN_TRIG_MAGIC_PKT = BIT(1), QLINK_WOWLAN_TRIG_PATTERN_PKT = BIT(2), }; /** * struct qlink_cmd_wowlan_set - data for QLINK_CMD_WOWLAN_SET command * * @triggers: requested bitmask of WoWLAN triggers */ struct qlink_cmd_wowlan_set { struct qlink_cmd chdr; __le32 triggers; u8 data[]; } __packed; enum qlink_ndev_event_type { QLINK_NDEV_EVENT_CHANGEUPPER, }; /** * struct qlink_cmd_ndev_event - data for QLINK_CMD_NDEV_EVENT command * * @event: type of event, one of &enum qlink_ndev_event_type */ struct qlink_cmd_ndev_event { struct qlink_cmd chdr; __le16 event; u8 rsvd[2]; } __packed; enum qlink_ndev_upper_type { QLINK_NDEV_UPPER_TYPE_NONE, QLINK_NDEV_UPPER_TYPE_BRIDGE, }; /** * struct qlink_cmd_ndev_changeupper - data for QLINK_NDEV_EVENT_CHANGEUPPER * * @br_domain: layer 2 broadcast domain ID that ndev is a member of * @upper_type: type of upper device, one of &enum qlink_ndev_upper_type */ struct qlink_cmd_ndev_changeupper { struct qlink_cmd_ndev_event nehdr; __le64 flags; __le32 br_domain; __le32 netspace_id; __le16 vlanid; u8 upper_type; u8 rsvd[1]; } __packed; /** * enum qlink_scan_flags - scan request control flags * * Scan flags are used to control QLINK_CMD_SCAN behavior. * * @QLINK_SCAN_FLAG_FLUSH: flush cache before scanning. */ enum qlink_scan_flags { QLINK_SCAN_FLAG_FLUSH = BIT(0), QLINK_SCAN_FLAG_DURATION_MANDATORY = BIT(1), }; /** * struct qlink_cmd_scan - data for QLINK_CMD_SCAN command * * @flags: scan flags, a bitmap of &enum qlink_scan_flags. * @n_ssids: number of WLAN_EID_SSID TLVs expected in variable portion of the * command. * @n_channels: number of QTN_TLV_ID_CHANNEL TLVs expected in variable payload. * @active_dwell: time spent on a single channel for an active scan. * @passive_dwell: time spent on a single channel for a passive scan. * @sample_duration: total duration of sampling a single channel during a scan * including off-channel dwell time and operating channel time. * @bssid: specific BSSID to scan for or a broadcast BSSID. * @scan_width: channel width to use, one of &enum qlink_channel_width. */ struct qlink_cmd_scan { struct qlink_cmd chdr; __le64 flags; __le16 n_ssids; __le16 n_channels; __le16 active_dwell; __le16 passive_dwell; __le16 sample_duration; u8 bssid[ETH_ALEN]; u8 scan_width; u8 rsvd[3]; u8 var_info[]; } __packed; /** * struct qlink_cmd_update_owe - data for QLINK_CMD_UPDATE_OWE_INFO command * * @peer: MAC of the peer device for which OWE processing has been completed * @status: OWE external processing status code * @ies: IEs for the peer constructed by the user space */ struct qlink_cmd_update_owe { struct qlink_cmd chdr; u8 peer[ETH_ALEN]; __le16 status; u8 ies[]; } __packed; /* QLINK Command Responses messages related definitions */ enum qlink_cmd_result { QLINK_CMD_RESULT_OK = 0, QLINK_CMD_RESULT_INVALID, QLINK_CMD_RESULT_ENOTSUPP, QLINK_CMD_RESULT_ENOTFOUND, QLINK_CMD_RESULT_EALREADY, QLINK_CMD_RESULT_EADDRINUSE, QLINK_CMD_RESULT_EADDRNOTAVAIL, QLINK_CMD_RESULT_EBUSY, }; /** * struct qlink_resp - QLINK command response message header * * Header used for QLINK messages of QLINK_MSG_TYPE_CMDRSP type. * * @mhdr: see &struct qlink_msg_header. * @cmd_id: command ID the response corresponds to, one of &enum qlink_cmd_type. * @seq_num: sequence number of command message, used for matching with * response message. * @result: result of the command execution, one of &enum qlink_cmd_result. * @macid: index of physical radio device the response is sent from or * QLINK_MACID_RSVD if not applicable. * @vifid: index of virtual wireless interface on specified @macid the response * is sent from or QLINK_VIFID_RSVD if not applicable. */ struct qlink_resp { struct qlink_msg_header mhdr; __le16 cmd_id; __le16 seq_num; __le16 result; u8 macid; u8 vifid; } __packed; /** * struct qlink_resp_init_fw - response for QLINK_CMD_FW_INIT * * @qlink_proto_ver: QLINK protocol version used by wifi card firmware. */ struct qlink_resp_init_fw { struct qlink_resp rhdr; __le32 qlink_proto_ver; } __packed; /** * enum qlink_dfs_regions - regulatory DFS regions * * Corresponds to &enum nl80211_dfs_regions. */ enum qlink_dfs_regions { QLINK_DFS_UNSET = 0, QLINK_DFS_FCC = 1, QLINK_DFS_ETSI = 2, QLINK_DFS_JP = 3, }; /** * struct qlink_resp_get_mac_info - response for QLINK_CMD_MAC_INFO command * * Data describing specific physical device providing wireless MAC * functionality. * * @dev_mac: MAC address of physical WMAC device (used for first BSS on * specified WMAC). * @num_tx_chain: Number of transmit chains used by WMAC. * @num_rx_chain: Number of receive chains used by WMAC. * @vht_cap_mod_mask: mask specifying which VHT capabilities can be altered. * @ht_cap_mod_mask: mask specifying which HT capabilities can be altered. * @max_scan_ssids: maximum number of SSIDs the device can scan for in any scan. * @bands_cap: wireless bands WMAC can operate in, bitmap of &enum qlink_band. * @max_ap_assoc_sta: Maximum number of associations supported by WMAC. * @radar_detect_widths: bitmask of channels BW for which WMAC can detect radar. * @alpha2: country code ID firmware is configured to. * @n_reg_rules: number of regulatory rules TLVs in variable portion of the * message. * @dfs_region: regulatory DFS region, one of &enum qlink_dfs_regions. * @var_info: variable-length WMAC info data. */ struct qlink_resp_get_mac_info { struct qlink_resp rhdr; u8 dev_mac[ETH_ALEN]; u8 num_tx_chain; u8 num_rx_chain; struct ieee80211_vht_cap vht_cap_mod_mask; struct ieee80211_ht_cap ht_cap_mod_mask; __le16 max_ap_assoc_sta; __le32 hw_version; __le32 probe_resp_offload; __le32 bss_select_support; __le16 n_addresses; __le16 radar_detect_widths; __le16 max_remain_on_channel_duration; __le16 max_acl_mac_addrs; __le32 frag_threshold; __le32 rts_threshold; u8 retry_short; u8 retry_long; u8 coverage_class; u8 max_scan_ssids; u8 max_sched_scan_reqs; u8 max_sched_scan_ssids; u8 max_match_sets; u8 max_adj_channel_rssi_comp; __le16 max_scan_ie_len; __le16 max_sched_scan_ie_len; __le32 max_sched_scan_plans; __le32 max_sched_scan_plan_interval; __le32 max_sched_scan_plan_iterations; u8 n_cipher_suites; u8 n_akm_suites; u8 max_num_pmkids; u8 num_iftype_ext_capab; u8 extended_capabilities_len; u8 max_data_retry_count; u8 n_iface_combinations; u8 max_num_csa_counters; u8 bands_cap; u8 alpha2[2]; u8 n_reg_rules; u8 dfs_region; u8 rsvd[3]; u8 var_info[]; } __packed; /** * struct qlink_resp_get_hw_info - response for QLINK_CMD_GET_HW_INFO command * * Description of wireless hardware capabilities and features. * * @fw_ver: wireless hardware firmware version. * @num_mac: Number of separate physical radio devices provided by hardware. * @mac_bitmap: Bitmap of MAC IDs that are active and can be used in firmware. * @total_tx_chains: total number of transmit chains used by device. * @total_rx_chains: total number of receive chains. * @info: variable-length HW info. */ struct qlink_resp_get_hw_info { struct qlink_resp rhdr; __le32 fw_ver; __le32 bld_tmstamp; __le32 plat_id; __le32 hw_ver; u8 num_mac; u8 mac_bitmap; u8 total_tx_chain; u8 total_rx_chain; u8 info[]; } __packed; /** * struct qlink_resp_manage_intf - response for interface management commands * * Response data for QLINK_CMD_ADD_INTF and QLINK_CMD_CHANGE_INTF commands. * * @rhdr: Common Command Response message header. * @intf_info: interface description. */ struct qlink_resp_manage_intf { struct qlink_resp rhdr; struct qlink_intf_info intf_info; } __packed; enum qlink_sta_info_rate_flags { QLINK_STA_INFO_RATE_FLAG_HT_MCS = BIT(0), QLINK_STA_INFO_RATE_FLAG_VHT_MCS = BIT(1), QLINK_STA_INFO_RATE_FLAG_SHORT_GI = BIT(2), QLINK_STA_INFO_RATE_FLAG_60G = BIT(3), QLINK_STA_INFO_RATE_FLAG_HE_MCS = BIT(4), }; /** * struct qlink_resp_get_sta_info - response for QLINK_CMD_GET_STA_INFO command * * Response data containing statistics for specified STA. * * @sta_addr: MAC address of STA the response carries statistic for. * @info: variable statistics for specified STA. */ struct qlink_resp_get_sta_info { struct qlink_resp rhdr; u8 sta_addr[ETH_ALEN]; u8 rsvd[2]; u8 info[]; } __packed; /** * struct qlink_resp_band_info_get - response for QLINK_CMD_BAND_INFO_GET cmd * * @band: frequency band that the response describes, one of @enum qlink_band. * @num_chans: total number of channels info TLVs contained in reply. * @num_bitrates: total number of bitrate TLVs contained in reply. * @info: variable-length info portion. */ struct qlink_resp_band_info_get { struct qlink_resp rhdr; u8 band; u8 num_chans; u8 num_bitrates; u8 rsvd[1]; u8 info[]; } __packed; /** * struct qlink_resp_get_chan_stats - response for QLINK_CMD_CHAN_STATS cmd * * @chan_freq: center frequency for a channel the report is sent for. * @info: variable-length channel info. */ struct qlink_resp_get_chan_stats { struct qlink_resp rhdr; __le32 chan_freq; u8 info[]; } __packed; /** * struct qlink_resp_channel_get - response for QLINK_CMD_CHAN_GET command * * @chan: definition of current operating channel. */ struct qlink_resp_channel_get { struct qlink_resp rhdr; struct qlink_chandef chan; } __packed; /** * struct qlink_resp_txpwr - response for QLINK_CMD_TXPWR command * * This response is intended for QLINK_TXPWR_GET operation and does not * contain any meaningful information in case of QLINK_TXPWR_SET operation. * * @txpwr: current transmit power setting, in mBm */ struct qlink_resp_txpwr { struct qlink_resp rhdr; __le32 txpwr; } __packed; /* QLINK Events messages related definitions */ enum qlink_event_type { QLINK_EVENT_STA_ASSOCIATED = 0x0021, QLINK_EVENT_STA_DEAUTH = 0x0022, QLINK_EVENT_MGMT_RECEIVED = 0x0023, QLINK_EVENT_SCAN_RESULTS = 0x0024, QLINK_EVENT_SCAN_COMPLETE = 0x0025, QLINK_EVENT_BSS_JOIN = 0x0026, QLINK_EVENT_BSS_LEAVE = 0x0027, QLINK_EVENT_FREQ_CHANGE = 0x0028, QLINK_EVENT_RADAR = 0x0029, QLINK_EVENT_EXTERNAL_AUTH = 0x0030, QLINK_EVENT_MIC_FAILURE = 0x0031, QLINK_EVENT_UPDATE_OWE = 0x0032, }; /** * struct qlink_event - QLINK event message header * * Header used for QLINK messages of QLINK_MSG_TYPE_EVENT type. * * @mhdr: Common QLINK message header. * @event_id: Specifies specific event ID, one of &enum qlink_event_type. * @macid: index of physical radio device the event was generated on or * QLINK_MACID_RSVD if not applicable. * @vifid: index of virtual wireless interface on specified @macid the event * was generated on or QLINK_VIFID_RSVD if not applicable. */ struct qlink_event { struct qlink_msg_header mhdr; __le16 event_id; u8 macid; u8 vifid; } __packed; /** * struct qlink_event_sta_assoc - data for QLINK_EVENT_STA_ASSOCIATED event * * @sta_addr: Address of a STA for which new association event was generated * @frame_control: control bits from 802.11 ASSOC_REQUEST header. * @payload: IEs from association request. */ struct qlink_event_sta_assoc { struct qlink_event ehdr; u8 sta_addr[ETH_ALEN]; __le16 frame_control; u8 ies[]; } __packed; /** * struct qlink_event_sta_deauth - data for QLINK_EVENT_STA_DEAUTH event * * @sta_addr: Address of a deauthenticated STA. * @reason: reason for deauthentication. */ struct qlink_event_sta_deauth { struct qlink_event ehdr; u8 sta_addr[ETH_ALEN]; __le16 reason; } __packed; /** * struct qlink_event_bss_join - data for QLINK_EVENT_BSS_JOIN event * * @chan: new operating channel definition * @bssid: BSSID of a BSS which interface tried to joined. * @status: status of joining attempt, see &enum ieee80211_statuscode. */ struct qlink_event_bss_join { struct qlink_event ehdr; struct qlink_chandef chan; u8 bssid[ETH_ALEN]; __le16 status; u8 ies[]; } __packed; /** * struct qlink_event_bss_leave - data for QLINK_EVENT_BSS_LEAVE event * * @reason: reason of disconnecting from BSS. */ struct qlink_event_bss_leave { struct qlink_event ehdr; __le16 reason; u8 rsvd[2]; } __packed; /** * struct qlink_event_freq_change - data for QLINK_EVENT_FREQ_CHANGE event * * @chan: new operating channel definition */ struct qlink_event_freq_change { struct qlink_event ehdr; struct qlink_chandef chan; } __packed; enum qlink_rxmgmt_flags { QLINK_RXMGMT_FLAG_ANSWERED = 1 << 0, }; /** * struct qlink_event_rxmgmt - data for QLINK_EVENT_MGMT_RECEIVED event * * @freq: Frequency on which the frame was received in MHz. * @flags: bitmap of &enum qlink_rxmgmt_flags. * @sig_dbm: signal strength in dBm. * @frame_data: data of Rx'd frame itself. */ struct qlink_event_rxmgmt { struct qlink_event ehdr; __le32 freq; __le32 flags; s8 sig_dbm; u8 rsvd[3]; u8 frame_data[]; } __packed; /** * struct qlink_event_scan_result - data for QLINK_EVENT_SCAN_RESULTS event * * @tsf: TSF timestamp indicating when scan results were generated. * @freq: Center frequency of the channel where BSS for which the scan result * event was generated was discovered. * @capab: capabilities field. * @bintval: beacon interval announced by discovered BSS. * @sig_dbm: signal strength in dBm. * @bssid: BSSID announced by discovered BSS. * @ssid_len: length of SSID announced by BSS. * @ssid: SSID announced by discovered BSS. * @payload: IEs that are announced by discovered BSS in its MGMt frames. */ struct qlink_event_scan_result { struct qlink_event ehdr; __le64 tsf; __le16 freq; __le16 capab; __le16 bintval; s8 sig_dbm; u8 ssid_len; u8 ssid[IEEE80211_MAX_SSID_LEN]; u8 bssid[ETH_ALEN]; u8 rsvd[2]; u8 payload[]; } __packed; /** * enum qlink_scan_complete_flags - indicates result of scan request. * * @QLINK_SCAN_NONE: Scan request was processed. * @QLINK_SCAN_ABORTED: Scan was aborted. */ enum qlink_scan_complete_flags { QLINK_SCAN_NONE = 0, QLINK_SCAN_ABORTED = BIT(0), }; /** * struct qlink_event_scan_complete - data for QLINK_EVENT_SCAN_COMPLETE event * * @flags: flags indicating the status of pending scan request, * see &enum qlink_scan_complete_flags. */ struct qlink_event_scan_complete { struct qlink_event ehdr; __le32 flags; } __packed; enum qlink_radar_event { QLINK_RADAR_DETECTED, QLINK_RADAR_CAC_FINISHED, QLINK_RADAR_CAC_ABORTED, QLINK_RADAR_NOP_FINISHED, QLINK_RADAR_PRE_CAC_EXPIRED, QLINK_RADAR_CAC_STARTED, }; /** * struct qlink_event_radar - data for QLINK_EVENT_RADAR event * * @chan: channel on which radar event happened. * @event: radar event type, one of &enum qlink_radar_event. */ struct qlink_event_radar { struct qlink_event ehdr; struct qlink_chandef chan; u8 event; u8 rsvd[3]; } __packed; /** * struct qlink_event_external_auth - data for QLINK_EVENT_EXTERNAL_AUTH event * * @ssid: SSID announced by BSS * @ssid_len: SSID length * @bssid: BSSID of the BSS to connect to * @akm_suite: AKM suite for external authentication * @action: action type/trigger for external authentication */ struct qlink_event_external_auth { struct qlink_event ehdr; __le32 akm_suite; u8 ssid[IEEE80211_MAX_SSID_LEN]; u8 bssid[ETH_ALEN]; u8 ssid_len; u8 action; } __packed; /** * struct qlink_event_mic_failure - data for QLINK_EVENT_MIC_FAILURE event * * @src: source MAC address of the frame * @key_index: index of the key being reported * @pairwise: whether the key is pairwise or group */ struct qlink_event_mic_failure { struct qlink_event ehdr; u8 src[ETH_ALEN]; u8 key_index; u8 pairwise; } __packed; /** * struct qlink_event_update_owe - data for QLINK_EVENT_UPDATE_OWE event * * @peer: MAC addr of the peer device for which OWE processing needs to be done * @ies: IEs from the peer */ struct qlink_event_update_owe { struct qlink_event ehdr; u8 peer[ETH_ALEN]; u8 rsvd[2]; u8 ies[]; } __packed; /* QLINK TLVs (Type-Length Values) definitions */ /** * enum qlink_tlv_id - list of TLVs that Qlink messages can carry * * @QTN_TLV_ID_BITMAP: a data representing a bitmap that is used together with * other TLVs: * &enum qlink_sta_info used to indicate which statistic carried in * QTN_TLV_ID_STA_STATS is valid. * &enum qlink_hw_capab listing wireless card capabilities. * &enum qlink_driver_capab listing driver/host system capabilities. * &enum qlink_chan_stat used to indicate which statistic carried in * QTN_TLV_ID_CHANNEL_STATS is valid. * @QTN_TLV_ID_STA_STATS: per-STA statistics as defined by * &struct qlink_sta_stats. Valid values are marked as such in a bitmap * carried by QTN_TLV_ID_BITMAP. * @QTN_TLV_ID_IFTYPE_DATA: supported band data. */ enum qlink_tlv_id { QTN_TLV_ID_FRAG_THRESH = 0x0201, QTN_TLV_ID_RTS_THRESH = 0x0202, QTN_TLV_ID_SRETRY_LIMIT = 0x0203, QTN_TLV_ID_LRETRY_LIMIT = 0x0204, QTN_TLV_ID_REG_RULE = 0x0207, QTN_TLV_ID_CHANNEL = 0x020F, QTN_TLV_ID_CHANDEF = 0x0210, QTN_TLV_ID_BITMAP = 0x0211, QTN_TLV_ID_STA_STATS = 0x0212, QTN_TLV_ID_COVERAGE_CLASS = 0x0213, QTN_TLV_ID_IFACE_LIMIT = 0x0214, QTN_TLV_ID_CHANNEL_STATS = 0x0216, QTN_TLV_ID_KEY = 0x0302, QTN_TLV_ID_SEQ = 0x0303, QTN_TLV_ID_IE_SET = 0x0305, QTN_TLV_ID_EXT_CAPABILITY_MASK = 0x0306, QTN_TLV_ID_ACL_DATA = 0x0307, QTN_TLV_ID_BUILD_NAME = 0x0401, QTN_TLV_ID_BUILD_REV = 0x0402, QTN_TLV_ID_BUILD_TYPE = 0x0403, QTN_TLV_ID_BUILD_LABEL = 0x0404, QTN_TLV_ID_HW_ID = 0x0405, QTN_TLV_ID_CALIBRATION_VER = 0x0406, QTN_TLV_ID_UBOOT_VER = 0x0407, QTN_TLV_ID_RANDOM_MAC_ADDR = 0x0408, QTN_TLV_ID_WOWLAN_CAPAB = 0x0410, QTN_TLV_ID_WOWLAN_PATTERN = 0x0411, QTN_TLV_ID_IFTYPE_DATA = 0x0418, }; struct qlink_tlv_hdr { __le16 type; __le16 len; u8 val[]; } __packed; struct qlink_iface_limit { __le16 max_num; __le16 type; } __packed; struct qlink_iface_limit_record { __le16 max_interfaces; u8 num_different_channels; u8 n_limits; struct qlink_iface_limit limits[]; } __packed; #define QLINK_RSSI_OFFSET 120 /** * enum qlink_reg_rule_flags - regulatory rule flags * * See description of &enum nl80211_reg_rule_flags */ enum qlink_reg_rule_flags { QLINK_RRF_NO_OFDM = BIT(0), QLINK_RRF_NO_CCK = BIT(1), QLINK_RRF_NO_INDOOR = BIT(2), QLINK_RRF_NO_OUTDOOR = BIT(3), QLINK_RRF_DFS = BIT(4), QLINK_RRF_PTP_ONLY = BIT(5), QLINK_RRF_PTMP_ONLY = BIT(6), QLINK_RRF_NO_IR = BIT(7), QLINK_RRF_AUTO_BW = BIT(8), QLINK_RRF_IR_CONCURRENT = BIT(9), QLINK_RRF_NO_HT40MINUS = BIT(10), QLINK_RRF_NO_HT40PLUS = BIT(11), QLINK_RRF_NO_80MHZ = BIT(12), QLINK_RRF_NO_160MHZ = BIT(13), }; /** * struct qlink_tlv_reg_rule - data for QTN_TLV_ID_REG_RULE TLV * * Regulatory rule description. * * @start_freq_khz: start frequency of the range the rule is attributed to. * @end_freq_khz: end frequency of the range the rule is attributed to. * @max_bandwidth_khz: max bandwidth that channels in specified range can be * configured to. * @max_antenna_gain: max antenna gain that can be used in the specified * frequency range, dBi. * @max_eirp: maximum EIRP. * @flags: regulatory rule flags in &enum qlink_reg_rule_flags. * @dfs_cac_ms: DFS CAC period. */ struct qlink_tlv_reg_rule { struct qlink_tlv_hdr hdr; __le32 start_freq_khz; __le32 end_freq_khz; __le32 max_bandwidth_khz; __le32 max_antenna_gain; __le32 max_eirp; __le32 flags; __le32 dfs_cac_ms; } __packed; enum qlink_channel_flags { QLINK_CHAN_DISABLED = BIT(0), QLINK_CHAN_NO_IR = BIT(1), QLINK_CHAN_RADAR = BIT(3), QLINK_CHAN_NO_HT40PLUS = BIT(4), QLINK_CHAN_NO_HT40MINUS = BIT(5), QLINK_CHAN_NO_OFDM = BIT(6), QLINK_CHAN_NO_80MHZ = BIT(7), QLINK_CHAN_NO_160MHZ = BIT(8), QLINK_CHAN_INDOOR_ONLY = BIT(9), QLINK_CHAN_IR_CONCURRENT = BIT(10), QLINK_CHAN_NO_20MHZ = BIT(11), QLINK_CHAN_NO_10MHZ = BIT(12), }; enum qlink_dfs_state { QLINK_DFS_USABLE, QLINK_DFS_UNAVAILABLE, QLINK_DFS_AVAILABLE, }; /** * struct qlink_tlv_channel - data for QTN_TLV_ID_CHANNEL TLV * * Channel settings. * * @channel: ieee80211 channel settings. */ struct qlink_tlv_channel { struct qlink_tlv_hdr hdr; struct qlink_channel chan; } __packed; /** * struct qlink_tlv_chandef - data for QTN_TLV_ID_CHANDEF TLV * * Channel definition. * * @chan: channel definition data. */ struct qlink_tlv_chandef { struct qlink_tlv_hdr hdr; struct qlink_chandef chdef; } __packed; enum qlink_ie_set_type { QLINK_IE_SET_UNKNOWN, QLINK_IE_SET_ASSOC_REQ, QLINK_IE_SET_ASSOC_RESP, QLINK_IE_SET_PROBE_REQ, QLINK_IE_SET_SCAN, QLINK_IE_SET_BEACON_HEAD, QLINK_IE_SET_BEACON_TAIL, QLINK_IE_SET_BEACON_IES, QLINK_IE_SET_PROBE_RESP, QLINK_IE_SET_PROBE_RESP_IES, }; /** * struct qlink_tlv_ie_set - data for QTN_TLV_ID_IE_SET * * @type: type of MGMT frame IEs belong to, one of &enum qlink_ie_set_type. * @flags: for future use. * @ie_data: IEs data. */ struct qlink_tlv_ie_set { struct qlink_tlv_hdr hdr; u8 type; u8 flags; u8 rsvd[2]; u8 ie_data[]; } __packed; /** * struct qlink_tlv_ext_ie - extension IE * * @eid_ext: element ID extension, one of &enum ieee80211_eid_ext. * @ie_data: IEs data. */ struct qlink_tlv_ext_ie { struct qlink_tlv_hdr hdr; u8 eid_ext; u8 rsvd[3]; u8 ie_data[]; } __packed; #define IEEE80211_HE_PPE_THRES_MAX_LEN 25 struct qlink_sband_iftype_data { __le16 types_mask; struct ieee80211_he_cap_elem he_cap_elem; struct ieee80211_he_mcs_nss_supp he_mcs_nss_supp; u8 ppe_thres[IEEE80211_HE_PPE_THRES_MAX_LEN]; } __packed; /** * struct qlink_tlv_iftype_data - data for QTN_TLV_ID_IFTYPE_DATA * * @n_iftype_data: number of entries in iftype_data. * @iftype_data: interface type data entries. */ struct qlink_tlv_iftype_data { struct qlink_tlv_hdr hdr; u8 n_iftype_data; u8 rsvd[3]; struct qlink_sband_iftype_data iftype_data[]; } __packed; /** * enum qlink_chan_stat - channel statistics bitmap * * Used to indicate which statistics values in &struct qlink_chan_stats * are valid. Individual values are used to fill a bitmap carried in a * payload of QTN_TLV_ID_BITMAP. * * @QLINK_CHAN_STAT_TIME_ON: time_on value is valid. * @QLINK_CHAN_STAT_TIME_TX: time_tx value is valid. * @QLINK_CHAN_STAT_TIME_RX: time_rx value is valid. * @QLINK_CHAN_STAT_CCA_BUSY: cca_busy value is valid. * @QLINK_CHAN_STAT_CCA_BUSY_EXT: cca_busy_ext value is valid. * @QLINK_CHAN_STAT_TIME_SCAN: time_scan value is valid. * @QLINK_CHAN_STAT_CHAN_NOISE: chan_noise value is valid. */ enum qlink_chan_stat { QLINK_CHAN_STAT_TIME_ON, QLINK_CHAN_STAT_TIME_TX, QLINK_CHAN_STAT_TIME_RX, QLINK_CHAN_STAT_CCA_BUSY, QLINK_CHAN_STAT_CCA_BUSY_EXT, QLINK_CHAN_STAT_TIME_SCAN, QLINK_CHAN_STAT_CHAN_NOISE, QLINK_CHAN_STAT_NUM, }; /** * struct qlink_chan_stats - data for QTN_TLV_ID_CHANNEL_STATS * * Carries a per-channel statistics. Not all fields may be filled with * valid values. Valid fields should be indicated as such using a bitmap of * &enum qlink_chan_stat. Bitmap is carried separately in a payload of * QTN_TLV_ID_BITMAP. * * @time_on: amount of time radio operated on that channel. * @time_tx: amount of time radio spent transmitting on the channel. * @time_rx: amount of time radio spent receiving on the channel. * @cca_busy: amount of time the primary channel was busy. * @cca_busy_ext: amount of time the secondary channel was busy. * @time_scan: amount of radio spent scanning on the channel. * @chan_noise: channel noise. */ struct qlink_chan_stats { __le64 time_on; __le64 time_tx; __le64 time_rx; __le64 cca_busy; __le64 cca_busy_ext; __le64 time_scan; s8 chan_noise; u8 rsvd[3]; } __packed; /** * enum qlink_sta_info - station information bitmap * * Used to indicate which statistics values in &struct qlink_sta_stats * are valid. Individual values are used to fill a bitmap carried in a * payload of QTN_TLV_ID_BITMAP. * * @QLINK_STA_INFO_CONNECTED_TIME: connected_time value is valid. * @QLINK_STA_INFO_INACTIVE_TIME: inactive_time value is valid. * @QLINK_STA_INFO_RX_BYTES: lower 32 bits of rx_bytes value are valid. * @QLINK_STA_INFO_TX_BYTES: lower 32 bits of tx_bytes value are valid. * @QLINK_STA_INFO_RX_BYTES64: rx_bytes value is valid. * @QLINK_STA_INFO_TX_BYTES64: tx_bytes value is valid. * @QLINK_STA_INFO_RX_DROP_MISC: rx_dropped_misc value is valid. * @QLINK_STA_INFO_BEACON_RX: rx_beacon value is valid. * @QLINK_STA_INFO_SIGNAL: signal value is valid. * @QLINK_STA_INFO_SIGNAL_AVG: signal_avg value is valid. * @QLINK_STA_INFO_RX_BITRATE: rxrate value is valid. * @QLINK_STA_INFO_TX_BITRATE: txrate value is valid. * @QLINK_STA_INFO_RX_PACKETS: rx_packets value is valid. * @QLINK_STA_INFO_TX_PACKETS: tx_packets value is valid. * @QLINK_STA_INFO_TX_RETRIES: tx_retries value is valid. * @QLINK_STA_INFO_TX_FAILED: tx_failed value is valid. * @QLINK_STA_INFO_STA_FLAGS: sta_flags value is valid. */ enum qlink_sta_info { QLINK_STA_INFO_CONNECTED_TIME, QLINK_STA_INFO_INACTIVE_TIME, QLINK_STA_INFO_RX_BYTES, QLINK_STA_INFO_TX_BYTES, QLINK_STA_INFO_RX_BYTES64, QLINK_STA_INFO_TX_BYTES64, QLINK_STA_INFO_RX_DROP_MISC, QLINK_STA_INFO_BEACON_RX, QLINK_STA_INFO_SIGNAL, QLINK_STA_INFO_SIGNAL_AVG, QLINK_STA_INFO_RX_BITRATE, QLINK_STA_INFO_TX_BITRATE, QLINK_STA_INFO_RX_PACKETS, QLINK_STA_INFO_TX_PACKETS, QLINK_STA_INFO_TX_RETRIES, QLINK_STA_INFO_TX_FAILED, QLINK_STA_INFO_STA_FLAGS, QLINK_STA_INFO_NUM, }; /** * struct qlink_sta_info_rate - STA rate statistics * * @rate: data rate in Mbps. * @flags: bitmap of &enum qlink_sta_info_rate_flags. * @mcs: 802.11-defined MCS index. * nss: Number of Spatial Streams. * @bw: bandwidth, one of &enum qlink_channel_width. */ struct qlink_sta_info_rate { __le16 rate; u8 flags; u8 mcs; u8 nss; u8 bw; } __packed; /** * struct qlink_sta_stats - data for QTN_TLV_ID_STA_STATS * * Carries statistics of a STA. Not all fields may be filled with * valid values. Valid fields should be indicated as such using a bitmap of * &enum qlink_sta_info. Bitmap is carried separately in a payload of * QTN_TLV_ID_BITMAP. */ struct qlink_sta_stats { __le64 rx_bytes; __le64 tx_bytes; __le64 rx_beacon; __le64 rx_duration; __le64 t_offset; __le32 connected_time; __le32 inactive_time; __le32 rx_packets; __le32 tx_packets; __le32 tx_retries; __le32 tx_failed; __le32 rx_dropped_misc; __le32 beacon_loss_count; __le32 expected_throughput; struct qlink_sta_info_state sta_flags; struct qlink_sta_info_rate txrate; struct qlink_sta_info_rate rxrate; __le16 llid; __le16 plid; u8 local_pm; u8 peer_pm; u8 nonpeer_pm; u8 rx_beacon_signal_avg; u8 plink_state; u8 signal; u8 signal_avg; u8 rsvd[1]; }; /** * struct qlink_random_mac_addr - data for QTN_TLV_ID_RANDOM_MAC_ADDR TLV * * Specifies MAC address mask/value for generation random MAC address * during scan. * * @mac_addr: MAC address used with randomisation * @mac_addr_mask: MAC address mask used with randomisation, bits that * are 0 in the mask should be randomised, bits that are 1 should * be taken from the @mac_addr */ struct qlink_random_mac_addr { u8 mac_addr[ETH_ALEN]; u8 mac_addr_mask[ETH_ALEN]; } __packed; /** * struct qlink_wowlan_capab_data - data for QTN_TLV_ID_WOWLAN_CAPAB TLV * * WoWLAN capabilities supported by cards. * * @version: version of WoWLAN data structure, to ensure backward * compatibility for firmwares with limited WoWLAN support * @len: Total length of WoWLAN data * @data: supported WoWLAN features */ struct qlink_wowlan_capab_data { __le16 version; __le16 len; u8 data[]; } __packed; /** * struct qlink_wowlan_support - supported WoWLAN capabilities * * @n_patterns: number of supported wakeup patterns * @pattern_max_len: maximum length of each pattern * @pattern_min_len: minimum length of each pattern */ struct qlink_wowlan_support { __le32 n_patterns; __le32 pattern_max_len; __le32 pattern_min_len; } __packed; #endif /* _QTN_QLINK_H_ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1