| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Larry Finger | 1966 | 96.90% | 8 | 40.00% |
| Ping-Ke Shih | 23 | 1.13% | 3 | 15.00% |
| Adam Lee | 20 | 0.99% | 1 | 5.00% |
| Benoit Taine | 5 | 0.25% | 1 | 5.00% |
| Kees Cook | 4 | 0.20% | 1 | 5.00% |
| Amadeusz Sławiński | 3 | 0.15% | 1 | 5.00% |
| Chen, Chien-Chia | 3 | 0.15% | 1 | 5.00% |
| Jason Yan | 2 | 0.10% | 1 | 5.00% |
| Souptick Joarder | 1 | 0.05% | 1 | 5.00% |
| Julia Lawall | 1 | 0.05% | 1 | 5.00% |
| Arvind Yadav | 1 | 0.05% | 1 | 5.00% |
| Total | 2029 | 20 |
// SPDX-License-Identifier: GPL-2.0 /* Copyright(c) 2009-2013 Realtek Corporation.*/ #include "../wifi.h" #include "../core.h" #include "../pci.h" #include "reg.h" #include "def.h" #include "phy.h" #include "dm.h" #include "hw.h" #include "trx.h" #include "led.h" #include "table.h" #include <linux/vmalloc.h> #include <linux/module.h> static void rtl88e_init_aspm_vars(struct ieee80211_hw *hw) { struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); /*close ASPM for AMD defaultly */ rtlpci->const_amdpci_aspm = 0; /* ASPM PS mode. * 0 - Disable ASPM, * 1 - Enable ASPM without Clock Req, * 2 - Enable ASPM with Clock Req, * 3 - Alwyas Enable ASPM with Clock Req, * 4 - Always Enable ASPM without Clock Req. * set defult to RTL8192CE:3 RTL8192E:2 */ rtlpci->const_pci_aspm = 3; /*Setting for PCI-E device */ rtlpci->const_devicepci_aspm_setting = 0x03; /*Setting for PCI-E bridge */ rtlpci->const_hostpci_aspm_setting = 0x02; /* In Hw/Sw Radio Off situation. * 0 - Default, * 1 - From ASPM setting without low Mac Pwr, * 2 - From ASPM setting with low Mac Pwr, * 3 - Bus D3 * set default to RTL8192CE:0 RTL8192SE:2 */ rtlpci->const_hwsw_rfoff_d3 = 0; /* This setting works for those device with * backdoor ASPM setting such as EPHY setting. * 0 - Not support ASPM, * 1 - Support ASPM, * 2 - According to chipset. */ rtlpci->const_support_pciaspm = rtlpriv->cfg->mod_params->aspm_support; } static int rtl88e_init_sw_vars(struct ieee80211_hw *hw) { int err = 0; struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); u8 tid; char *fw_name; rtl8188ee_bt_reg_init(hw); rtlpriv->dm.dm_initialgain_enable = true; rtlpriv->dm.dm_flag = 0; rtlpriv->dm.disable_framebursting = false; rtlpriv->dm.thermalvalue = 0; rtlpci->transmit_config = CFENDFORM | BIT(15); /* compatible 5G band 88ce just 2.4G band & smsp */ rtlpriv->rtlhal.current_bandtype = BAND_ON_2_4G; rtlpriv->rtlhal.bandset = BAND_ON_2_4G; rtlpriv->rtlhal.macphymode = SINGLEMAC_SINGLEPHY; rtlpci->receive_config = (RCR_APPFCS | RCR_APP_MIC | RCR_APP_ICV | RCR_APP_PHYST_RXFF | RCR_HTC_LOC_CTRL | RCR_AMF | RCR_ACF | RCR_ADF | RCR_AICV | RCR_ACRC32 | RCR_AB | RCR_AM | RCR_APM | 0); rtlpci->irq_mask[0] = (u32)(IMR_PSTIMEOUT | IMR_HSISR_IND_ON_INT | IMR_C2HCMD | IMR_HIGHDOK | IMR_MGNTDOK | IMR_BKDOK | IMR_BEDOK | IMR_VIDOK | IMR_VODOK | IMR_RDU | IMR_ROK | 0); rtlpci->irq_mask[1] = (u32) (IMR_RXFOVW | 0); rtlpci->sys_irq_mask = (u32) (HSIMR_PDN_INT_EN | HSIMR_RON_INT_EN); /* for LPS & IPS */ rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps; rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps; rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps; rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support; if (rtlpriv->cfg->mod_params->disable_watchdog) pr_info("watchdog disabled\n"); if (!rtlpriv->psc.inactiveps) pr_info("rtl8188ee: Power Save off (module option)\n"); if (!rtlpriv->psc.fwctrl_lps) pr_info("rtl8188ee: FW Power Save off (module option)\n"); rtlpriv->psc.reg_fwctrl_lps = 3; rtlpriv->psc.reg_max_lps_awakeintvl = 5; /* for ASPM, you can close aspm through * set const_support_pciaspm = 0 */ rtl88e_init_aspm_vars(hw); if (rtlpriv->psc.reg_fwctrl_lps == 1) rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE; else if (rtlpriv->psc.reg_fwctrl_lps == 2) rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE; else if (rtlpriv->psc.reg_fwctrl_lps == 3) rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE; /* for firmware buf */ rtlpriv->rtlhal.pfirmware = vzalloc(0x8000); if (!rtlpriv->rtlhal.pfirmware) { pr_info("Can't alloc buffer for fw.\n"); return 1; } fw_name = "rtlwifi/rtl8188efw.bin"; rtlpriv->max_fw_size = 0x8000; pr_info("Using firmware %s\n", fw_name); err = request_firmware_nowait(THIS_MODULE, 1, fw_name, rtlpriv->io.dev, GFP_KERNEL, hw, rtl_fw_cb); if (err) { pr_info("Failed to request firmware!\n"); vfree(rtlpriv->rtlhal.pfirmware); rtlpriv->rtlhal.pfirmware = NULL; return 1; } /* for early mode */ rtlpriv->rtlhal.earlymode_enable = false; rtlpriv->rtlhal.max_earlymode_num = 10; for (tid = 0; tid < 8; tid++) skb_queue_head_init(&rtlpriv->mac80211.skb_waitq[tid]); /*low power */ rtlpriv->psc.low_power_enable = false; if (rtlpriv->psc.low_power_enable) { timer_setup(&rtlpriv->works.fw_clockoff_timer, rtl88ee_fw_clk_off_timer_callback, 0); } timer_setup(&rtlpriv->works.fast_antenna_training_timer, rtl88e_dm_fast_antenna_training_callback, 0); return err; } static void rtl88e_deinit_sw_vars(struct ieee80211_hw *hw) { struct rtl_priv *rtlpriv = rtl_priv(hw); if (rtlpriv->rtlhal.pfirmware) { vfree(rtlpriv->rtlhal.pfirmware); rtlpriv->rtlhal.pfirmware = NULL; } if (rtlpriv->psc.low_power_enable) del_timer_sync(&rtlpriv->works.fw_clockoff_timer); del_timer_sync(&rtlpriv->works.fast_antenna_training_timer); } /* get bt coexist status */ static bool rtl88e_get_btc_status(void) { return false; } static struct rtl_hal_ops rtl8188ee_hal_ops = { .init_sw_vars = rtl88e_init_sw_vars, .deinit_sw_vars = rtl88e_deinit_sw_vars, .read_eeprom_info = rtl88ee_read_eeprom_info, .interrupt_recognized = rtl88ee_interrupt_recognized,/*need check*/ .hw_init = rtl88ee_hw_init, .hw_disable = rtl88ee_card_disable, .hw_suspend = rtl88ee_suspend, .hw_resume = rtl88ee_resume, .enable_interrupt = rtl88ee_enable_interrupt, .disable_interrupt = rtl88ee_disable_interrupt, .set_network_type = rtl88ee_set_network_type, .set_chk_bssid = rtl88ee_set_check_bssid, .set_qos = rtl88ee_set_qos, .set_bcn_reg = rtl88ee_set_beacon_related_registers, .set_bcn_intv = rtl88ee_set_beacon_interval, .update_interrupt_mask = rtl88ee_update_interrupt_mask, .get_hw_reg = rtl88ee_get_hw_reg, .set_hw_reg = rtl88ee_set_hw_reg, .update_rate_tbl = rtl88ee_update_hal_rate_tbl, .fill_tx_desc = rtl88ee_tx_fill_desc, .fill_tx_cmddesc = rtl88ee_tx_fill_cmddesc, .query_rx_desc = rtl88ee_rx_query_desc, .set_channel_access = rtl88ee_update_channel_access_setting, .radio_onoff_checking = rtl88ee_gpio_radio_on_off_checking, .set_bw_mode = rtl88e_phy_set_bw_mode, .switch_channel = rtl88e_phy_sw_chnl, .dm_watchdog = rtl88e_dm_watchdog, .scan_operation_backup = rtl88e_phy_scan_operation_backup, .set_rf_power_state = rtl88e_phy_set_rf_power_state, .led_control = rtl88ee_led_control, .set_desc = rtl88ee_set_desc, .get_desc = rtl88ee_get_desc, .is_tx_desc_closed = rtl88ee_is_tx_desc_closed, .tx_polling = rtl88ee_tx_polling, .enable_hw_sec = rtl88ee_enable_hw_security_config, .set_key = rtl88ee_set_key, .init_sw_leds = rtl88ee_init_sw_leds, .get_bbreg = rtl88e_phy_query_bb_reg, .set_bbreg = rtl88e_phy_set_bb_reg, .get_rfreg = rtl88e_phy_query_rf_reg, .set_rfreg = rtl88e_phy_set_rf_reg, .get_btc_status = rtl88e_get_btc_status, }; static struct rtl_mod_params rtl88ee_mod_params = { .sw_crypto = false, .inactiveps = true, .swctrl_lps = false, .fwctrl_lps = false, .msi_support = true, .aspm_support = 1, .debug_level = 0, .debug_mask = 0, }; static const struct rtl_hal_cfg rtl88ee_hal_cfg = { .bar_id = 2, .write_readback = true, .name = "rtl88e_pci", .ops = &rtl8188ee_hal_ops, .mod_params = &rtl88ee_mod_params, .maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL, .maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN, .maps[SYS_CLK] = REG_SYS_CLKR, .maps[MAC_RCR_AM] = AM, .maps[MAC_RCR_AB] = AB, .maps[MAC_RCR_ACRC32] = ACRC32, .maps[MAC_RCR_ACF] = ACF, .maps[MAC_RCR_AAP] = AAP, .maps[MAC_HIMR] = REG_HIMR, .maps[MAC_HIMRE] = REG_HIMRE, .maps[MAC_HSISR] = REG_HSISR, .maps[EFUSE_ACCESS] = REG_EFUSE_ACCESS, .maps[EFUSE_TEST] = REG_EFUSE_TEST, .maps[EFUSE_CTRL] = REG_EFUSE_CTRL, .maps[EFUSE_CLK] = 0, .maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL, .maps[EFUSE_PWC_EV12V] = PWC_EV12V, .maps[EFUSE_FEN_ELDR] = FEN_ELDR, .maps[EFUSE_LOADER_CLK_EN] = LOADER_CLK_EN, .maps[EFUSE_ANA8M] = ANA8M, .maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE, .maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION, .maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN, .maps[EFUSE_OOB_PROTECT_BYTES_LEN] = EFUSE_OOB_PROTECT_BYTES, .maps[RWCAM] = REG_CAMCMD, .maps[WCAMI] = REG_CAMWRITE, .maps[RCAMO] = REG_CAMREAD, .maps[CAMDBG] = REG_CAMDBG, .maps[SECR] = REG_SECCFG, .maps[SEC_CAM_NONE] = CAM_NONE, .maps[SEC_CAM_WEP40] = CAM_WEP40, .maps[SEC_CAM_TKIP] = CAM_TKIP, .maps[SEC_CAM_AES] = CAM_AES, .maps[SEC_CAM_WEP104] = CAM_WEP104, .maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6, .maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5, .maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4, .maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3, .maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2, .maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1, /* .maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8, */ /*need check*/ .maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7, .maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6, .maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5, .maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4, .maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3, .maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2, .maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1, /* .maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2,*/ /* .maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1,*/ .maps[RTL_IMR_TXFOVW] = IMR_TXFOVW, .maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT, .maps[RTL_IMR_BCNINT] = IMR_BCNDMAINT0, .maps[RTL_IMR_RXFOVW] = IMR_RXFOVW, .maps[RTL_IMR_RDU] = IMR_RDU, .maps[RTL_IMR_ATIMEND] = IMR_ATIMEND, .maps[RTL_IMR_BDOK] = IMR_BCNDOK0, .maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK, .maps[RTL_IMR_TBDER] = IMR_TBDER, .maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK, .maps[RTL_IMR_TBDOK] = IMR_TBDOK, .maps[RTL_IMR_BKDOK] = IMR_BKDOK, .maps[RTL_IMR_BEDOK] = IMR_BEDOK, .maps[RTL_IMR_VIDOK] = IMR_VIDOK, .maps[RTL_IMR_VODOK] = IMR_VODOK, .maps[RTL_IMR_ROK] = IMR_ROK, .maps[RTL_IMR_HSISR_IND] = IMR_HSISR_IND_ON_INT, .maps[RTL_IBSS_INT_MASKS] = (IMR_BCNDMAINT0 | IMR_TBDOK | IMR_TBDER), .maps[RTL_RC_CCK_RATE1M] = DESC92C_RATE1M, .maps[RTL_RC_CCK_RATE2M] = DESC92C_RATE2M, .maps[RTL_RC_CCK_RATE5_5M] = DESC92C_RATE5_5M, .maps[RTL_RC_CCK_RATE11M] = DESC92C_RATE11M, .maps[RTL_RC_OFDM_RATE6M] = DESC92C_RATE6M, .maps[RTL_RC_OFDM_RATE9M] = DESC92C_RATE9M, .maps[RTL_RC_OFDM_RATE12M] = DESC92C_RATE12M, .maps[RTL_RC_OFDM_RATE18M] = DESC92C_RATE18M, .maps[RTL_RC_OFDM_RATE24M] = DESC92C_RATE24M, .maps[RTL_RC_OFDM_RATE36M] = DESC92C_RATE36M, .maps[RTL_RC_OFDM_RATE48M] = DESC92C_RATE48M, .maps[RTL_RC_OFDM_RATE54M] = DESC92C_RATE54M, .maps[RTL_RC_HT_RATEMCS7] = DESC92C_RATEMCS7, .maps[RTL_RC_HT_RATEMCS15] = DESC92C_RATEMCS15, }; static const struct pci_device_id rtl88ee_pci_ids[] = { {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8179, rtl88ee_hal_cfg)}, {}, }; MODULE_DEVICE_TABLE(pci, rtl88ee_pci_ids); MODULE_AUTHOR("zhiyuan_yang <zhiyuan_yang@realsil.com.cn>"); MODULE_AUTHOR("Realtek WlanFAE <wlanfae@realtek.com>"); MODULE_AUTHOR("Larry Finger <Larry.Finger@lwfinger.net>"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Realtek 8188E 802.11n PCI wireless"); MODULE_FIRMWARE("rtlwifi/rtl8188efw.bin"); module_param_named(swenc, rtl88ee_mod_params.sw_crypto, bool, 0444); module_param_named(debug_level, rtl88ee_mod_params.debug_level, int, 0644); module_param_named(debug_mask, rtl88ee_mod_params.debug_mask, ullong, 0644); module_param_named(ips, rtl88ee_mod_params.inactiveps, bool, 0444); module_param_named(swlps, rtl88ee_mod_params.swctrl_lps, bool, 0444); module_param_named(fwlps, rtl88ee_mod_params.fwctrl_lps, bool, 0444); module_param_named(msi, rtl88ee_mod_params.msi_support, bool, 0444); module_param_named(aspm, rtl88ee_mod_params.aspm_support, int, 0444); module_param_named(disable_watchdog, rtl88ee_mod_params.disable_watchdog, bool, 0444); MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n"); MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n"); MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n"); MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n"); MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 1)\n"); MODULE_PARM_DESC(aspm, "Set to 1 to enable ASPM (default 1)\n"); MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)"); MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)"); MODULE_PARM_DESC(disable_watchdog, "Set to 1 to disable the watchdog (default 0)\n"); static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume); static struct pci_driver rtl88ee_driver = { .name = KBUILD_MODNAME, .id_table = rtl88ee_pci_ids, .probe = rtl_pci_probe, .remove = rtl_pci_disconnect, .driver.pm = &rtlwifi_pm_ops, }; module_pci_driver(rtl88ee_driver);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1