| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Patrice Chotard | 2315 | 98.97% | 4 | 36.36% |
| Lee Jones | 10 | 0.43% | 1 | 9.09% |
| Linus Walleij | 6 | 0.26% | 2 | 18.18% |
| Srinidhi Kasagar | 3 | 0.13% | 1 | 9.09% |
| Sachin Kamat | 2 | 0.09% | 1 | 9.09% |
| Thomas Gleixner | 2 | 0.09% | 1 | 9.09% |
| Geert Uytterhoeven | 1 | 0.04% | 1 | 9.09% |
| Total | 2339 | 11 |
// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) ST-Ericsson SA 2012 * * Author: Patrice Chotard <patrice.chotard@stericsson.com> for ST-Ericsson. */ #include <linux/kernel.h> #include <linux/pinctrl/pinctrl.h> #include <linux/mfd/abx500/ab8500.h> #include "pinctrl-abx500.h" /* All the pins that can be used for GPIO and some other functions */ #define ABX500_GPIO(offset) (offset) #define AB8505_PIN_N4 ABX500_GPIO(1) #define AB8505_PIN_R5 ABX500_GPIO(2) #define AB8505_PIN_P5 ABX500_GPIO(3) /* hole */ #define AB8505_PIN_B16 ABX500_GPIO(10) #define AB8505_PIN_B17 ABX500_GPIO(11) /* hole */ #define AB8505_PIN_D17 ABX500_GPIO(13) #define AB8505_PIN_C16 ABX500_GPIO(14) /* hole */ #define AB8505_PIN_P2 ABX500_GPIO(17) #define AB8505_PIN_N3 ABX500_GPIO(18) #define AB8505_PIN_T1 ABX500_GPIO(19) #define AB8505_PIN_P3 ABX500_GPIO(20) /* hole */ #define AB8505_PIN_H14 ABX500_GPIO(34) /* hole */ #define AB8505_PIN_J15 ABX500_GPIO(40) #define AB8505_PIN_J14 ABX500_GPIO(41) /* hole */ #define AB8505_PIN_L4 ABX500_GPIO(50) /* hole */ #define AB8505_PIN_D16 ABX500_GPIO(52) #define AB8505_PIN_D15 ABX500_GPIO(53) /* indicates the higher GPIO number */ #define AB8505_GPIO_MAX_NUMBER 53 /* * The names of the pins are denoted by GPIO number and ball name, even * though they can be used for other things than GPIO, this is the first * column in the table of the data sheet and often used on schematics and * such. */ static const struct pinctrl_pin_desc ab8505_pins[] = { PINCTRL_PIN(AB8505_PIN_N4, "GPIO1_N4"), PINCTRL_PIN(AB8505_PIN_R5, "GPIO2_R5"), PINCTRL_PIN(AB8505_PIN_P5, "GPIO3_P5"), /* hole */ PINCTRL_PIN(AB8505_PIN_B16, "GPIO10_B16"), PINCTRL_PIN(AB8505_PIN_B17, "GPIO11_B17"), /* hole */ PINCTRL_PIN(AB8505_PIN_D17, "GPIO13_D17"), PINCTRL_PIN(AB8505_PIN_C16, "GPIO14_C16"), /* hole */ PINCTRL_PIN(AB8505_PIN_P2, "GPIO17_P2"), PINCTRL_PIN(AB8505_PIN_N3, "GPIO18_N3"), PINCTRL_PIN(AB8505_PIN_T1, "GPIO19_T1"), PINCTRL_PIN(AB8505_PIN_P3, "GPIO20_P3"), /* hole */ PINCTRL_PIN(AB8505_PIN_H14, "GPIO34_H14"), /* hole */ PINCTRL_PIN(AB8505_PIN_J15, "GPIO40_J15"), PINCTRL_PIN(AB8505_PIN_J14, "GPIO41_J14"), /* hole */ PINCTRL_PIN(AB8505_PIN_L4, "GPIO50_L4"), /* hole */ PINCTRL_PIN(AB8505_PIN_D16, "GPIO52_D16"), PINCTRL_PIN(AB8505_PIN_D15, "GPIO53_D15"), }; /* * Maps local GPIO offsets to local pin numbers */ static const struct abx500_pinrange ab8505_pinranges[] = { ABX500_PINRANGE(1, 3, ABX500_ALT_A), ABX500_PINRANGE(10, 2, ABX500_DEFAULT), ABX500_PINRANGE(13, 1, ABX500_DEFAULT), ABX500_PINRANGE(14, 1, ABX500_ALT_A), ABX500_PINRANGE(17, 4, ABX500_ALT_A), ABX500_PINRANGE(34, 1, ABX500_ALT_A), ABX500_PINRANGE(40, 2, ABX500_ALT_A), ABX500_PINRANGE(50, 1, ABX500_DEFAULT), ABX500_PINRANGE(52, 2, ABX500_ALT_A), }; /* * Read the pin group names like this: * sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function * * The groups are arranged as sets per altfunction column, so we can * mux in one group at a time by selecting the same altfunction for them * all. When functions require pins on different altfunctions, you need * to combine several groups. */ /* default column */ static const unsigned sysclkreq2_d_1_pins[] = { AB8505_PIN_N4 }; static const unsigned sysclkreq3_d_1_pins[] = { AB8505_PIN_R5 }; static const unsigned sysclkreq4_d_1_pins[] = { AB8505_PIN_P5 }; static const unsigned gpio10_d_1_pins[] = { AB8505_PIN_B16 }; static const unsigned gpio11_d_1_pins[] = { AB8505_PIN_B17 }; static const unsigned gpio13_d_1_pins[] = { AB8505_PIN_D17 }; static const unsigned pwmout1_d_1_pins[] = { AB8505_PIN_C16 }; /* audio data interface 2*/ static const unsigned adi2_d_1_pins[] = { AB8505_PIN_P2, AB8505_PIN_N3, AB8505_PIN_T1, AB8505_PIN_P3 }; static const unsigned extcpena_d_1_pins[] = { AB8505_PIN_H14 }; /* modem SDA/SCL */ static const unsigned modsclsda_d_1_pins[] = { AB8505_PIN_J15, AB8505_PIN_J14 }; static const unsigned gpio50_d_1_pins[] = { AB8505_PIN_L4 }; static const unsigned resethw_d_1_pins[] = { AB8505_PIN_D16 }; static const unsigned service_d_1_pins[] = { AB8505_PIN_D15 }; /* Altfunction A column */ static const unsigned gpio1_a_1_pins[] = { AB8505_PIN_N4 }; static const unsigned gpio2_a_1_pins[] = { AB8505_PIN_R5 }; static const unsigned gpio3_a_1_pins[] = { AB8505_PIN_P5 }; static const unsigned hiqclkena_a_1_pins[] = { AB8505_PIN_B16 }; static const unsigned pdmclk_a_1_pins[] = { AB8505_PIN_B17 }; static const unsigned uarttxdata_a_1_pins[] = { AB8505_PIN_D17 }; static const unsigned gpio14_a_1_pins[] = { AB8505_PIN_C16 }; static const unsigned gpio17_a_1_pins[] = { AB8505_PIN_P2 }; static const unsigned gpio18_a_1_pins[] = { AB8505_PIN_N3 }; static const unsigned gpio19_a_1_pins[] = { AB8505_PIN_T1 }; static const unsigned gpio20_a_1_pins[] = { AB8505_PIN_P3 }; static const unsigned gpio34_a_1_pins[] = { AB8505_PIN_H14 }; static const unsigned gpio40_a_1_pins[] = { AB8505_PIN_J15 }; static const unsigned gpio41_a_1_pins[] = { AB8505_PIN_J14 }; static const unsigned uartrxdata_a_1_pins[] = { AB8505_PIN_J14 }; static const unsigned gpio50_a_1_pins[] = { AB8505_PIN_L4 }; static const unsigned gpio52_a_1_pins[] = { AB8505_PIN_D16 }; static const unsigned gpio53_a_1_pins[] = { AB8505_PIN_D15 }; /* Altfunction B colum */ static const unsigned pdmdata_b_1_pins[] = { AB8505_PIN_B16 }; static const unsigned extvibrapwm1_b_1_pins[] = { AB8505_PIN_D17 }; static const unsigned extvibrapwm2_b_1_pins[] = { AB8505_PIN_L4 }; /* Altfunction C column */ static const unsigned usbvdat_c_1_pins[] = { AB8505_PIN_D17 }; #define AB8505_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins, \ .npins = ARRAY_SIZE(a##_pins), .altsetting = b } static const struct abx500_pingroup ab8505_groups[] = { AB8505_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT), AB8505_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT), AB8505_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT), AB8505_PIN_GROUP(gpio10_d_1, ABX500_DEFAULT), AB8505_PIN_GROUP(gpio11_d_1, ABX500_DEFAULT), AB8505_PIN_GROUP(gpio13_d_1, ABX500_DEFAULT), AB8505_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT), AB8505_PIN_GROUP(adi2_d_1, ABX500_DEFAULT), AB8505_PIN_GROUP(extcpena_d_1, ABX500_DEFAULT), AB8505_PIN_GROUP(modsclsda_d_1, ABX500_DEFAULT), AB8505_PIN_GROUP(gpio50_d_1, ABX500_DEFAULT), AB8505_PIN_GROUP(resethw_d_1, ABX500_DEFAULT), AB8505_PIN_GROUP(service_d_1, ABX500_DEFAULT), AB8505_PIN_GROUP(gpio1_a_1, ABX500_ALT_A), AB8505_PIN_GROUP(gpio2_a_1, ABX500_ALT_A), AB8505_PIN_GROUP(gpio3_a_1, ABX500_ALT_A), AB8505_PIN_GROUP(hiqclkena_a_1, ABX500_ALT_A), AB8505_PIN_GROUP(pdmclk_a_1, ABX500_ALT_A), AB8505_PIN_GROUP(uarttxdata_a_1, ABX500_ALT_A), AB8505_PIN_GROUP(gpio14_a_1, ABX500_ALT_A), AB8505_PIN_GROUP(gpio17_a_1, ABX500_ALT_A), AB8505_PIN_GROUP(gpio18_a_1, ABX500_ALT_A), AB8505_PIN_GROUP(gpio19_a_1, ABX500_ALT_A), AB8505_PIN_GROUP(gpio20_a_1, ABX500_ALT_A), AB8505_PIN_GROUP(gpio34_a_1, ABX500_ALT_A), AB8505_PIN_GROUP(gpio40_a_1, ABX500_ALT_A), AB8505_PIN_GROUP(gpio41_a_1, ABX500_ALT_A), AB8505_PIN_GROUP(uartrxdata_a_1, ABX500_ALT_A), AB8505_PIN_GROUP(gpio50_a_1, ABX500_ALT_A), AB8505_PIN_GROUP(gpio52_a_1, ABX500_ALT_A), AB8505_PIN_GROUP(gpio53_a_1, ABX500_ALT_A), AB8505_PIN_GROUP(pdmdata_b_1, ABX500_ALT_B), AB8505_PIN_GROUP(extvibrapwm1_b_1, ABX500_ALT_B), AB8505_PIN_GROUP(extvibrapwm2_b_1, ABX500_ALT_B), AB8505_PIN_GROUP(usbvdat_c_1, ABX500_ALT_C), }; /* We use this macro to define the groups applicable to a function */ #define AB8505_FUNC_GROUPS(a, b...) \ static const char * const a##_groups[] = { b }; AB8505_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1", "sysclkreq4_d_1"); AB8505_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1", "gpio10_d_1", "gpio11_d_1", "gpio13_d_1", "gpio14_a_1", "gpio17_a_1", "gpio18_a_1", "gpio19_a_1", "gpio20_a_1", "gpio34_a_1", "gpio40_a_1", "gpio41_a_1", "gpio50_d_1", "gpio52_a_1", "gpio53_a_1"); AB8505_FUNC_GROUPS(pwmout, "pwmout1_d_1"); AB8505_FUNC_GROUPS(adi2, "adi2_d_1"); AB8505_FUNC_GROUPS(extcpena, "extcpena_d_1"); AB8505_FUNC_GROUPS(modsclsda, "modsclsda_d_1"); AB8505_FUNC_GROUPS(resethw, "resethw_d_1"); AB8505_FUNC_GROUPS(service, "service_d_1"); AB8505_FUNC_GROUPS(hiqclkena, "hiqclkena_a_1"); AB8505_FUNC_GROUPS(pdm, "pdmclk_a_1", "pdmdata_b_1"); AB8505_FUNC_GROUPS(uartdata, "uarttxdata_a_1", "uartrxdata_a_1"); AB8505_FUNC_GROUPS(extvibra, "extvibrapwm1_b_1", "extvibrapwm2_b_1"); AB8505_FUNC_GROUPS(usbvdat, "usbvdat_c_1"); #define FUNCTION(fname) \ { \ .name = #fname, \ .groups = fname##_groups, \ .ngroups = ARRAY_SIZE(fname##_groups), \ } static const struct abx500_function ab8505_functions[] = { FUNCTION(sysclkreq), FUNCTION(gpio), FUNCTION(pwmout), FUNCTION(adi2), FUNCTION(extcpena), FUNCTION(modsclsda), FUNCTION(resethw), FUNCTION(service), FUNCTION(hiqclkena), FUNCTION(pdm), FUNCTION(uartdata), FUNCTION(extvibra), FUNCTION(extvibra), FUNCTION(usbvdat), }; /* * this table translates what's is in the AB8505 specification regarding the * balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C). * ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1, * ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val), * * example : * * ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2), * means that pin AB8505_PIN_D18 (pin 13) supports 4 mux (default/ALT_A, * ALT_B and ALT_C), so GPIOSEL and ALTERNATFUNC registers are used to * select the mux. ALTA, ALTB and ALTC val indicates values to write in * ALTERNATFUNC register. We need to specifies these values as SOC * designers didn't apply the same logic on how to select mux in the * ABx500 family. * * As this pins supports at least ALT_B mux, default mux is * selected by writing 1 in GPIOSEL bit : * * | GPIOSEL bit=4 | alternatfunc bit2=4 | alternatfunc bit1=3 * default | 1 | 0 | 0 * alt_A | 0 | 0 | 1 * alt_B | 0 | 0 | 0 * alt_C | 0 | 1 | 0 * * ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED), * means that pin AB9540_PIN_R4 (pin 1) supports 2 mux, so only GPIOSEL * register is used to select the mux. As this pins doesn't support at * least ALT_B mux, default mux is by writing 0 in GPIOSEL bit : * * | GPIOSEL bit=0 | alternatfunc bit2= | alternatfunc bit1= * default | 0 | 0 | 0 * alt_A | 1 | 0 | 0 */ static struct alternate_functions ab8505_alternate_functions[AB8505_GPIO_MAX_NUMBER + 1] = { ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */ ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */ ALTERNATE_FUNCTIONS(2, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */ ALTERNATE_FUNCTIONS(3, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/ ALTERNATE_FUNCTIONS(4, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO4, bit 3 reserved */ ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5, bit 4 reserved */ ALTERNATE_FUNCTIONS(6, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO6, bit 5 reserved */ ALTERNATE_FUNCTIONS(7, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO7, bit 6 reserved */ ALTERNATE_FUNCTIONS(8, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO8, bit 7 reserved */ ALTERNATE_FUNCTIONS(9, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO9, bit 0 reserved */ ALTERNATE_FUNCTIONS(10, 1, 0, UNUSED, 1, 0, 0), /* GPIO10, altA and altB controlled by bit 0 */ ALTERNATE_FUNCTIONS(11, 2, 1, UNUSED, 0, 0, 0), /* GPIO11, altA controlled by bit 2 */ ALTERNATE_FUNCTIONS(12, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO12, bit3 reserved */ ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2), /* GPIO13, altA altB and altC controlled by bit 3 and 4 */ ALTERNATE_FUNCTIONS(14, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */ ALTERNATE_FUNCTIONS(15, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO15, bit 6 reserved */ ALTERNATE_FUNCTIONS(16, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO15, bit 7 reserved */ /* * pins 17 to 20 are special case, only bit 0 is used to select * alternate function for these 4 pins. * bits 1 to 3 are reserved */ ALTERNATE_FUNCTIONS(17, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */ ALTERNATE_FUNCTIONS(18, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 0 */ ALTERNATE_FUNCTIONS(19, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 0 */ ALTERNATE_FUNCTIONS(20, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 0 */ ALTERNATE_FUNCTIONS(21, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO21, bit 4 reserved */ ALTERNATE_FUNCTIONS(22, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO22, bit 5 reserved */ ALTERNATE_FUNCTIONS(23, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO23, bit 6 reserved */ ALTERNATE_FUNCTIONS(24, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO24, bit 7 reserved */ ALTERNATE_FUNCTIONS(25, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO25, bit 0 reserved */ ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO26, bit 1 reserved */ ALTERNATE_FUNCTIONS(27, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO27, bit 2 reserved */ ALTERNATE_FUNCTIONS(28, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO28, bit 3 reserved */ ALTERNATE_FUNCTIONS(29, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO29, bit 4 reserved */ ALTERNATE_FUNCTIONS(30, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO30, bit 5 reserved */ ALTERNATE_FUNCTIONS(31, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO31, bit 6 reserved */ ALTERNATE_FUNCTIONS(32, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO32, bit 7 reserved */ ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33, bit 0 reserved */ ALTERNATE_FUNCTIONS(34, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO34, altA controlled by bit 1 */ ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO35, bit 2 reserved */ ALTERNATE_FUNCTIONS(36, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO36, bit 2 reserved */ ALTERNATE_FUNCTIONS(37, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO37, bit 2 reserved */ ALTERNATE_FUNCTIONS(38, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO38, bit 2 reserved */ ALTERNATE_FUNCTIONS(39, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO39, bit 2 reserved */ ALTERNATE_FUNCTIONS(40, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO40, altA controlled by bit 7*/ ALTERNATE_FUNCTIONS(41, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO41, altA controlled by bit 0 */ ALTERNATE_FUNCTIONS(42, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO42, bit 1 reserved */ ALTERNATE_FUNCTIONS(43, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO43, bit 2 reserved */ ALTERNATE_FUNCTIONS(44, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO44, bit 3 reserved */ ALTERNATE_FUNCTIONS(45, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO45, bit 4 reserved */ ALTERNATE_FUNCTIONS(46, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO46, bit 5 reserved */ ALTERNATE_FUNCTIONS(47, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO47, bit 6 reserved */ ALTERNATE_FUNCTIONS(48, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO48, bit 7 reserved */ ALTERNATE_FUNCTIONS(49, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49, bit 0 reserved */ ALTERNATE_FUNCTIONS(50, 1, 2, UNUSED, 1, 0, 0), /* GPIO50, altA controlled by bit 1 */ ALTERNATE_FUNCTIONS(51, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49, bit 0 reserved */ ALTERNATE_FUNCTIONS(52, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO52, altA controlled by bit 3 */ ALTERNATE_FUNCTIONS(53, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO53, altA controlled by bit 4 */ }; /* * For AB8505 Only some GPIOs are interrupt capable, and they are * organized in discontiguous clusters: * * GPIO10 to GPIO11 * GPIO13 * GPIO40 and GPIO41 * GPIO50 * GPIO52 to GPIO53 */ static struct abx500_gpio_irq_cluster ab8505_gpio_irq_cluster[] = { GPIO_IRQ_CLUSTER(10, 11, AB8500_INT_GPIO10R), GPIO_IRQ_CLUSTER(13, 13, AB8500_INT_GPIO13R), GPIO_IRQ_CLUSTER(40, 41, AB8500_INT_GPIO40R), GPIO_IRQ_CLUSTER(50, 50, AB9540_INT_GPIO50R), GPIO_IRQ_CLUSTER(52, 53, AB9540_INT_GPIO52R), }; static struct abx500_pinctrl_soc_data ab8505_soc = { .gpio_ranges = ab8505_pinranges, .gpio_num_ranges = ARRAY_SIZE(ab8505_pinranges), .pins = ab8505_pins, .npins = ARRAY_SIZE(ab8505_pins), .functions = ab8505_functions, .nfunctions = ARRAY_SIZE(ab8505_functions), .groups = ab8505_groups, .ngroups = ARRAY_SIZE(ab8505_groups), .alternate_functions = ab8505_alternate_functions, .gpio_irq_cluster = ab8505_gpio_irq_cluster, .ngpio_irq_cluster = ARRAY_SIZE(ab8505_gpio_irq_cluster), .irq_gpio_rising_offset = AB8500_INT_GPIO6R, .irq_gpio_falling_offset = AB8500_INT_GPIO6F, .irq_gpio_factor = 1, }; void abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc) { *soc = &ab8505_soc; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1