Contributors: 11
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| Arun Murthy |
269 |
48.47% |
1 |
5.88% |
| Uwe Kleine-König |
132 |
23.78% |
4 |
23.53% |
| Thierry Reding |
73 |
13.15% |
1 |
5.88% |
| Rabin Vincent |
31 |
5.59% |
1 |
5.88% |
| Jingoo Han |
16 |
2.88% |
1 |
5.88% |
| Srinidhi Kasagar |
15 |
2.70% |
1 |
5.88% |
| Axel Lin |
11 |
1.98% |
4 |
23.53% |
| Paul Gortmaker |
3 |
0.54% |
1 |
5.88% |
| Thomas Gleixner |
2 |
0.36% |
1 |
5.88% |
| Linus Walleij |
2 |
0.36% |
1 |
5.88% |
| Tejun Heo |
1 |
0.18% |
1 |
5.88% |
| Total |
555 |
|
17 |
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) ST-Ericsson SA 2010
*
* Author: Arun R Murthy <arun.murthy@stericsson.com>
*/
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/pwm.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/module.h>
/*
* PWM Out generators
* Bank: 0x10
*/
#define AB8500_PWM_OUT_CTRL1_REG 0x60
#define AB8500_PWM_OUT_CTRL2_REG 0x61
#define AB8500_PWM_OUT_CTRL7_REG 0x66
struct ab8500_pwm_chip {
struct pwm_chip chip;
unsigned int hwid;
};
static struct ab8500_pwm_chip *ab8500_pwm_from_chip(struct pwm_chip *chip)
{
return container_of(chip, struct ab8500_pwm_chip, chip);
}
static int ab8500_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
const struct pwm_state *state)
{
int ret;
u8 reg;
unsigned int higher_val, lower_val;
struct ab8500_pwm_chip *ab8500 = ab8500_pwm_from_chip(chip);
if (state->polarity != PWM_POLARITY_NORMAL)
return -EINVAL;
if (!state->enabled) {
ret = abx500_mask_and_set_register_interruptible(chip->dev,
AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
1 << ab8500->hwid, 0);
if (ret < 0)
dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
pwm->label, ret);
return ret;
}
/*
* get the first 8 bits that are be written to
* AB8500_PWM_OUT_CTRL1_REG[0:7]
*/
lower_val = state->duty_cycle & 0x00FF;
/*
* get bits [9:10] that are to be written to
* AB8500_PWM_OUT_CTRL2_REG[0:1]
*/
higher_val = ((state->duty_cycle & 0x0300) >> 8);
reg = AB8500_PWM_OUT_CTRL1_REG + (ab8500->hwid * 2);
ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
reg, (u8)lower_val);
if (ret < 0)
return ret;
ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
(reg + 1), (u8)higher_val);
if (ret < 0)
return ret;
ret = abx500_mask_and_set_register_interruptible(chip->dev,
AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
1 << ab8500->hwid, 1 << ab8500->hwid);
if (ret < 0)
dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n",
pwm->label, ret);
return ret;
}
static const struct pwm_ops ab8500_pwm_ops = {
.apply = ab8500_pwm_apply,
.owner = THIS_MODULE,
};
static int ab8500_pwm_probe(struct platform_device *pdev)
{
struct ab8500_pwm_chip *ab8500;
int err;
if (pdev->id < 1 || pdev->id > 31)
return dev_err_probe(&pdev->dev, EINVAL, "Invalid device id %d\n", pdev->id);
/*
* Nothing to be done in probe, this is required to get the
* device which is required for ab8500 read and write
*/
ab8500 = devm_kzalloc(&pdev->dev, sizeof(*ab8500), GFP_KERNEL);
if (ab8500 == NULL)
return -ENOMEM;
ab8500->chip.dev = &pdev->dev;
ab8500->chip.ops = &ab8500_pwm_ops;
ab8500->chip.npwm = 1;
ab8500->hwid = pdev->id - 1;
err = devm_pwmchip_add(&pdev->dev, &ab8500->chip);
if (err < 0)
return dev_err_probe(&pdev->dev, err, "Failed to add pwm chip\n");
dev_dbg(&pdev->dev, "pwm probe successful\n");
return 0;
}
static struct platform_driver ab8500_pwm_driver = {
.driver = {
.name = "ab8500-pwm",
},
.probe = ab8500_pwm_probe,
};
module_platform_driver(ab8500_pwm_driver);
MODULE_AUTHOR("Arun MURTHY <arun.murthy@stericsson.com>");
MODULE_DESCRIPTION("AB8500 Pulse Width Modulation Driver");
MODULE_ALIAS("platform:ab8500-pwm");
MODULE_LICENSE("GPL v2");