Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Bart Tanghe | 750 | 84.27% | 1 | 8.33% |
Lino Sanfilippo | 53 | 5.96% | 1 | 8.33% |
Uwe Kleine-König | 47 | 5.28% | 2 | 16.67% |
Stefan Wahren | 32 | 3.60% | 5 | 41.67% |
Sean Young | 3 | 0.34% | 1 | 8.33% |
Krzysztof Kozlowski | 3 | 0.34% | 1 | 8.33% |
Yangtao Li | 2 | 0.22% | 1 | 8.33% |
Total | 890 | 12 |
// SPDX-License-Identifier: GPL-2.0 /* * Copyright 2014 Bart Tanghe <bart.tanghe@thomasmore.be> */ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/pwm.h> #define PWM_CONTROL 0x000 #define PWM_CONTROL_SHIFT(x) ((x) * 8) #define PWM_CONTROL_MASK 0xff #define PWM_MODE 0x80 /* set timer in PWM mode */ #define PWM_ENABLE (1 << 0) #define PWM_POLARITY (1 << 4) #define PERIOD(x) (((x) * 0x10) + 0x10) #define DUTY(x) (((x) * 0x10) + 0x14) #define PERIOD_MIN 0x2 struct bcm2835_pwm { struct pwm_chip chip; struct device *dev; void __iomem *base; struct clk *clk; }; static inline struct bcm2835_pwm *to_bcm2835_pwm(struct pwm_chip *chip) { return container_of(chip, struct bcm2835_pwm, chip); } static int bcm2835_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) { struct bcm2835_pwm *pc = to_bcm2835_pwm(chip); u32 value; value = readl(pc->base + PWM_CONTROL); value &= ~(PWM_CONTROL_MASK << PWM_CONTROL_SHIFT(pwm->hwpwm)); value |= (PWM_MODE << PWM_CONTROL_SHIFT(pwm->hwpwm)); writel(value, pc->base + PWM_CONTROL); return 0; } static void bcm2835_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) { struct bcm2835_pwm *pc = to_bcm2835_pwm(chip); u32 value; value = readl(pc->base + PWM_CONTROL); value &= ~(PWM_CONTROL_MASK << PWM_CONTROL_SHIFT(pwm->hwpwm)); writel(value, pc->base + PWM_CONTROL); } static int bcm2835_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, const struct pwm_state *state) { struct bcm2835_pwm *pc = to_bcm2835_pwm(chip); unsigned long rate = clk_get_rate(pc->clk); unsigned long long period_cycles; u64 max_period; u32 val; if (!rate) { dev_err(pc->dev, "failed to get clock rate\n"); return -EINVAL; } /* * period_cycles must be a 32 bit value, so period * rate / NSEC_PER_SEC * must be <= U32_MAX. As U32_MAX * NSEC_PER_SEC < U64_MAX the * multiplication period * rate doesn't overflow. * To calculate the maximal possible period that guarantees the * above inequality: * * round(period * rate / NSEC_PER_SEC) <= U32_MAX * <=> period * rate / NSEC_PER_SEC < U32_MAX + 0.5 * <=> period * rate < (U32_MAX + 0.5) * NSEC_PER_SEC * <=> period < ((U32_MAX + 0.5) * NSEC_PER_SEC) / rate * <=> period < ((U32_MAX * NSEC_PER_SEC + NSEC_PER_SEC/2) / rate * <=> period <= ceil((U32_MAX * NSEC_PER_SEC + NSEC_PER_SEC/2) / rate) - 1 */ max_period = DIV_ROUND_UP_ULL((u64)U32_MAX * NSEC_PER_SEC + NSEC_PER_SEC / 2, rate) - 1; if (state->period > max_period) return -EINVAL; /* set period */ period_cycles = DIV_ROUND_CLOSEST_ULL(state->period * rate, NSEC_PER_SEC); /* don't accept a period that is too small */ if (period_cycles < PERIOD_MIN) return -EINVAL; writel(period_cycles, pc->base + PERIOD(pwm->hwpwm)); /* set duty cycle */ val = DIV_ROUND_CLOSEST_ULL(state->duty_cycle * rate, NSEC_PER_SEC); writel(val, pc->base + DUTY(pwm->hwpwm)); /* set polarity */ val = readl(pc->base + PWM_CONTROL); if (state->polarity == PWM_POLARITY_NORMAL) val &= ~(PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm)); else val |= PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm); /* enable/disable */ if (state->enabled) val |= PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm); else val &= ~(PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm)); writel(val, pc->base + PWM_CONTROL); return 0; } static const struct pwm_ops bcm2835_pwm_ops = { .request = bcm2835_pwm_request, .free = bcm2835_pwm_free, .apply = bcm2835_pwm_apply, .owner = THIS_MODULE, }; static int bcm2835_pwm_probe(struct platform_device *pdev) { struct bcm2835_pwm *pc; int ret; pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); if (!pc) return -ENOMEM; pc->dev = &pdev->dev; pc->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(pc->base)) return PTR_ERR(pc->base); pc->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(pc->clk)) return dev_err_probe(&pdev->dev, PTR_ERR(pc->clk), "clock not found\n"); ret = clk_prepare_enable(pc->clk); if (ret) return ret; pc->chip.dev = &pdev->dev; pc->chip.ops = &bcm2835_pwm_ops; pc->chip.npwm = 2; platform_set_drvdata(pdev, pc); ret = pwmchip_add(&pc->chip); if (ret < 0) goto add_fail; return 0; add_fail: clk_disable_unprepare(pc->clk); return ret; } static int bcm2835_pwm_remove(struct platform_device *pdev) { struct bcm2835_pwm *pc = platform_get_drvdata(pdev); pwmchip_remove(&pc->chip); clk_disable_unprepare(pc->clk); return 0; } static const struct of_device_id bcm2835_pwm_of_match[] = { { .compatible = "brcm,bcm2835-pwm", }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, bcm2835_pwm_of_match); static struct platform_driver bcm2835_pwm_driver = { .driver = { .name = "bcm2835-pwm", .of_match_table = bcm2835_pwm_of_match, }, .probe = bcm2835_pwm_probe, .remove = bcm2835_pwm_remove, }; module_platform_driver(bcm2835_pwm_driver); MODULE_AUTHOR("Bart Tanghe <bart.tanghe@thomasmore.be>"); MODULE_DESCRIPTION("Broadcom BCM2835 PWM driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1