| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Mauro Carvalho Chehab | 3213 | 52.38% | 23 | 28.40% |
| Stefan Ringel | 1817 | 29.62% | 20 | 24.69% |
| Dmitry Belimov | 600 | 9.78% | 8 | 9.88% |
| Michel Ludwig | 239 | 3.90% | 9 | 11.11% |
| Bee Hock Goh | 98 | 1.60% | 1 | 1.23% |
| Thierry Reding | 78 | 1.27% | 6 | 7.41% |
| Holger Nelson | 33 | 0.54% | 1 | 1.23% |
| SF Markus Elfring | 26 | 0.42% | 1 | 1.23% |
| Matthieu CASTET | 9 | 0.15% | 1 | 1.23% |
| Roel Van Nyen | 8 | 0.13% | 1 | 1.23% |
| Tejun Heo | 4 | 0.07% | 2 | 2.47% |
| Hans Verkuil | 2 | 0.03% | 2 | 2.47% |
| Greg Kroah-Hartman | 2 | 0.03% | 1 | 1.23% |
| Greg Dietsche | 1 | 0.02% | 1 | 1.23% |
| Arvind Yadav | 1 | 0.02% | 1 | 1.23% |
| Geert Uytterhoeven | 1 | 0.02% | 1 | 1.23% |
| Maykel Moya | 1 | 0.02% | 1 | 1.23% |
| Laurent Pinchart | 1 | 0.02% | 1 | 1.23% |
| Total | 6134 | 81 |
// SPDX-License-Identifier: GPL-2.0 // tm6000-cards.c - driver for TM5600/TM6000/TM6010 USB video capture devices // // Copyright (c) 2006-2007 Mauro Carvalho Chehab <mchehab@kernel.org> #include <linux/init.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/delay.h> #include <linux/i2c.h> #include <linux/usb.h> #include <linux/slab.h> #include <media/v4l2-common.h> #include <media/tuner.h> #include <media/i2c/tvaudio.h> #include <media/rc-map.h> #include "tm6000.h" #include "tm6000-regs.h" #include "xc2028.h" #include "xc5000.h" #define TM6000_BOARD_UNKNOWN 0 #define TM5600_BOARD_GENERIC 1 #define TM6000_BOARD_GENERIC 2 #define TM6010_BOARD_GENERIC 3 #define TM5600_BOARD_10MOONS_UT821 4 #define TM5600_BOARD_10MOONS_UT330 5 #define TM6000_BOARD_ADSTECH_DUAL_TV 6 #define TM6000_BOARD_FREECOM_AND_SIMILAR 7 #define TM6000_BOARD_ADSTECH_MINI_DUAL_TV 8 #define TM6010_BOARD_HAUPPAUGE_900H 9 #define TM6010_BOARD_BEHOLD_WANDER 10 #define TM6010_BOARD_BEHOLD_VOYAGER 11 #define TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE 12 #define TM6010_BOARD_TWINHAN_TU501 13 #define TM6010_BOARD_BEHOLD_WANDER_LITE 14 #define TM6010_BOARD_BEHOLD_VOYAGER_LITE 15 #define TM5600_BOARD_TERRATEC_GRABSTER 16 #define is_generic(model) ((model == TM6000_BOARD_UNKNOWN) || \ (model == TM5600_BOARD_GENERIC) || \ (model == TM6000_BOARD_GENERIC) || \ (model == TM6010_BOARD_GENERIC)) #define TM6000_MAXBOARDS 16 static unsigned int card[] = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET }; module_param_array(card, int, NULL, 0444); static unsigned long tm6000_devused; struct tm6000_board { char *name; char eename[16]; /* EEPROM name */ unsigned eename_size; /* size of EEPROM name */ unsigned eename_pos; /* Position where it appears at ROM */ struct tm6000_capabilities caps; enum tm6000_devtype type; /* variant of the chipset */ int tuner_type; /* type of the tuner */ int tuner_addr; /* tuner address */ int demod_addr; /* demodulator address */ struct tm6000_gpio gpio; struct tm6000_input vinput[3]; struct tm6000_input rinput; char *ir_codes; }; static struct tm6000_board tm6000_boards[] = { [TM6000_BOARD_UNKNOWN] = { .name = "Unknown tm6000 video grabber", .caps = { .has_tuner = 1, .has_eeprom = 1, }, .gpio = { .tuner_reset = TM6000_GPIO_1, }, .vinput = { { .type = TM6000_INPUT_TV, .vmux = TM6000_VMUX_VIDEO_B, .amux = TM6000_AMUX_ADC1, }, { .type = TM6000_INPUT_COMPOSITE1, .vmux = TM6000_VMUX_VIDEO_A, .amux = TM6000_AMUX_ADC2, }, { .type = TM6000_INPUT_SVIDEO, .vmux = TM6000_VMUX_VIDEO_AB, .amux = TM6000_AMUX_ADC2, }, }, }, [TM5600_BOARD_GENERIC] = { .name = "Generic tm5600 board", .type = TM5600, .tuner_type = TUNER_XC2028, .tuner_addr = 0xc2 >> 1, .caps = { .has_tuner = 1, .has_eeprom = 1, }, .gpio = { .tuner_reset = TM6000_GPIO_1, }, .vinput = { { .type = TM6000_INPUT_TV, .vmux = TM6000_VMUX_VIDEO_B, .amux = TM6000_AMUX_ADC1, }, { .type = TM6000_INPUT_COMPOSITE1, .vmux = TM6000_VMUX_VIDEO_A, .amux = TM6000_AMUX_ADC2, }, { .type = TM6000_INPUT_SVIDEO, .vmux = TM6000_VMUX_VIDEO_AB, .amux = TM6000_AMUX_ADC2, }, }, }, [TM6000_BOARD_GENERIC] = { .name = "Generic tm6000 board", .tuner_type = TUNER_XC2028, .tuner_addr = 0xc2 >> 1, .caps = { .has_tuner = 1, .has_eeprom = 1, }, .gpio = { .tuner_reset = TM6000_GPIO_1, }, .vinput = { { .type = TM6000_INPUT_TV, .vmux = TM6000_VMUX_VIDEO_B, .amux = TM6000_AMUX_ADC1, }, { .type = TM6000_INPUT_COMPOSITE1, .vmux = TM6000_VMUX_VIDEO_A, .amux = TM6000_AMUX_ADC2, }, { .type = TM6000_INPUT_SVIDEO, .vmux = TM6000_VMUX_VIDEO_AB, .amux = TM6000_AMUX_ADC2, }, }, }, [TM6010_BOARD_GENERIC] = { .name = "Generic tm6010 board", .type = TM6010, .tuner_type = TUNER_XC2028, .tuner_addr = 0xc2 >> 1, .demod_addr = 0x1e >> 1, .caps = { .has_tuner = 1, .has_dvb = 1, .has_zl10353 = 1, .has_eeprom = 1, .has_remote = 1, }, .gpio = { .tuner_reset = TM6010_GPIO_2, .tuner_on = TM6010_GPIO_3, .demod_reset = TM6010_GPIO_1, .demod_on = TM6010_GPIO_4, .power_led = TM6010_GPIO_7, .dvb_led = TM6010_GPIO_5, .ir = TM6010_GPIO_0, }, .vinput = { { .type = TM6000_INPUT_TV, .vmux = TM6000_VMUX_VIDEO_B, .amux = TM6000_AMUX_SIF1, }, { .type = TM6000_INPUT_COMPOSITE1, .vmux = TM6000_VMUX_VIDEO_A, .amux = TM6000_AMUX_ADC2, }, { .type = TM6000_INPUT_SVIDEO, .vmux = TM6000_VMUX_VIDEO_AB, .amux = TM6000_AMUX_ADC2, }, }, }, [TM5600_BOARD_10MOONS_UT821] = { .name = "10Moons UT 821", .tuner_type = TUNER_XC2028, .eename = { '1', '0', 'M', 'O', 'O', 'N', 'S', '5', '6', '0', '0', 0xff, 0x45, 0x5b}, .eename_size = 14, .eename_pos = 0x14, .type = TM5600, .tuner_addr = 0xc2 >> 1, .caps = { .has_tuner = 1, .has_eeprom = 1, }, .gpio = { .tuner_reset = TM6000_GPIO_1, }, .vinput = { { .type = TM6000_INPUT_TV, .vmux = TM6000_VMUX_VIDEO_B, .amux = TM6000_AMUX_ADC1, }, { .type = TM6000_INPUT_COMPOSITE1, .vmux = TM6000_VMUX_VIDEO_A, .amux = TM6000_AMUX_ADC2, }, { .type = TM6000_INPUT_SVIDEO, .vmux = TM6000_VMUX_VIDEO_AB, .amux = TM6000_AMUX_ADC2, }, }, }, [TM5600_BOARD_10MOONS_UT330] = { .name = "10Moons UT 330", .tuner_type = TUNER_PHILIPS_FQ1216AME_MK4, .tuner_addr = 0xc8 >> 1, .caps = { .has_tuner = 1, .has_dvb = 0, .has_zl10353 = 0, .has_eeprom = 1, }, .vinput = { { .type = TM6000_INPUT_TV, .vmux = TM6000_VMUX_VIDEO_B, .amux = TM6000_AMUX_ADC1, }, { .type = TM6000_INPUT_COMPOSITE1, .vmux = TM6000_VMUX_VIDEO_A, .amux = TM6000_AMUX_ADC2, }, { .type = TM6000_INPUT_SVIDEO, .vmux = TM6000_VMUX_VIDEO_AB, .amux = TM6000_AMUX_ADC2, }, }, }, [TM6000_BOARD_ADSTECH_DUAL_TV] = { .name = "ADSTECH Dual TV USB", .tuner_type = TUNER_XC2028, .tuner_addr = 0xc8 >> 1, .caps = { .has_tuner = 1, .has_tda9874 = 1, .has_dvb = 1, .has_zl10353 = 1, .has_eeprom = 1, }, .vinput = { { .type = TM6000_INPUT_TV, .vmux = TM6000_VMUX_VIDEO_B, .amux = TM6000_AMUX_ADC1, }, { .type = TM6000_INPUT_COMPOSITE1, .vmux = TM6000_VMUX_VIDEO_A, .amux = TM6000_AMUX_ADC2, }, { .type = TM6000_INPUT_SVIDEO, .vmux = TM6000_VMUX_VIDEO_AB, .amux = TM6000_AMUX_ADC2, }, }, }, [TM6000_BOARD_FREECOM_AND_SIMILAR] = { .name = "Freecom Hybrid Stick / Moka DVB-T Receiver Dual", .tuner_type = TUNER_XC2028, /* has a XC3028 */ .tuner_addr = 0xc2 >> 1, .demod_addr = 0x1e >> 1, .caps = { .has_tuner = 1, .has_dvb = 1, .has_zl10353 = 1, .has_eeprom = 0, .has_remote = 1, }, .gpio = { .tuner_reset = TM6000_GPIO_4, }, .vinput = { { .type = TM6000_INPUT_TV, .vmux = TM6000_VMUX_VIDEO_B, .amux = TM6000_AMUX_ADC1, }, { .type = TM6000_INPUT_COMPOSITE1, .vmux = TM6000_VMUX_VIDEO_A, .amux = TM6000_AMUX_ADC2, }, { .type = TM6000_INPUT_SVIDEO, .vmux = TM6000_VMUX_VIDEO_AB, .amux = TM6000_AMUX_ADC2, }, }, }, [TM6000_BOARD_ADSTECH_MINI_DUAL_TV] = { .name = "ADSTECH Mini Dual TV USB", .tuner_type = TUNER_XC2028, /* has a XC3028 */ .tuner_addr = 0xc8 >> 1, .demod_addr = 0x1e >> 1, .caps = { .has_tuner = 1, .has_dvb = 1, .has_zl10353 = 1, .has_eeprom = 0, }, .gpio = { .tuner_reset = TM6000_GPIO_4, }, .vinput = { { .type = TM6000_INPUT_TV, .vmux = TM6000_VMUX_VIDEO_B, .amux = TM6000_AMUX_ADC1, }, { .type = TM6000_INPUT_COMPOSITE1, .vmux = TM6000_VMUX_VIDEO_A, .amux = TM6000_AMUX_ADC2, }, { .type = TM6000_INPUT_SVIDEO, .vmux = TM6000_VMUX_VIDEO_AB, .amux = TM6000_AMUX_ADC2, }, }, }, [TM6010_BOARD_HAUPPAUGE_900H] = { .name = "Hauppauge WinTV HVR-900H / WinTV USB2-Stick", .eename = { 'H', 0, 'V', 0, 'R', 0, '9', 0, '0', 0, '0', 0, 'H', 0 }, .eename_size = 14, .eename_pos = 0x42, .tuner_type = TUNER_XC2028, /* has a XC3028 */ .tuner_addr = 0xc2 >> 1, .demod_addr = 0x1e >> 1, .type = TM6010, .ir_codes = RC_MAP_HAUPPAUGE, .caps = { .has_tuner = 1, .has_dvb = 1, .has_zl10353 = 1, .has_eeprom = 1, .has_remote = 1, }, .gpio = { .tuner_reset = TM6010_GPIO_2, .tuner_on = TM6010_GPIO_3, .demod_reset = TM6010_GPIO_1, .demod_on = TM6010_GPIO_4, .power_led = TM6010_GPIO_7, .dvb_led = TM6010_GPIO_5, .ir = TM6010_GPIO_0, }, .vinput = { { .type = TM6000_INPUT_TV, .vmux = TM6000_VMUX_VIDEO_B, .amux = TM6000_AMUX_SIF1, }, { .type = TM6000_INPUT_COMPOSITE1, .vmux = TM6000_VMUX_VIDEO_A, .amux = TM6000_AMUX_ADC2, }, { .type = TM6000_INPUT_SVIDEO, .vmux = TM6000_VMUX_VIDEO_AB, .amux = TM6000_AMUX_ADC2, }, }, }, [TM6010_BOARD_BEHOLD_WANDER] = { .name = "Beholder Wander DVB-T/TV/FM USB2.0", .tuner_type = TUNER_XC5000, .tuner_addr = 0xc2 >> 1, .demod_addr = 0x1e >> 1, .type = TM6010, .caps = { .has_tuner = 1, .has_dvb = 1, .has_zl10353 = 1, .has_eeprom = 1, .has_remote = 1, .has_radio = 1, }, .gpio = { .tuner_reset = TM6010_GPIO_0, .demod_reset = TM6010_GPIO_1, .power_led = TM6010_GPIO_6, }, .vinput = { { .type = TM6000_INPUT_TV, .vmux = TM6000_VMUX_VIDEO_B, .amux = TM6000_AMUX_SIF1, }, { .type = TM6000_INPUT_COMPOSITE1, .vmux = TM6000_VMUX_VIDEO_A, .amux = TM6000_AMUX_ADC2, }, { .type = TM6000_INPUT_SVIDEO, .vmux = TM6000_VMUX_VIDEO_AB, .amux = TM6000_AMUX_ADC2, }, }, .rinput = { .type = TM6000_INPUT_RADIO, .amux = TM6000_AMUX_ADC1, }, }, [TM6010_BOARD_BEHOLD_VOYAGER] = { .name = "Beholder Voyager TV/FM USB2.0", .tuner_type = TUNER_XC5000, .tuner_addr = 0xc2 >> 1, .type = TM6010, .caps = { .has_tuner = 1, .has_dvb = 0, .has_zl10353 = 0, .has_eeprom = 1, .has_remote = 1, .has_radio = 1, }, .gpio = { .tuner_reset = TM6010_GPIO_0, .power_led = TM6010_GPIO_6, }, .vinput = { { .type = TM6000_INPUT_TV, .vmux = TM6000_VMUX_VIDEO_B, .amux = TM6000_AMUX_SIF1, }, { .type = TM6000_INPUT_COMPOSITE1, .vmux = TM6000_VMUX_VIDEO_A, .amux = TM6000_AMUX_ADC2, }, { .type = TM6000_INPUT_SVIDEO, .vmux = TM6000_VMUX_VIDEO_AB, .amux = TM6000_AMUX_ADC2, }, }, .rinput = { .type = TM6000_INPUT_RADIO, .amux = TM6000_AMUX_ADC1, }, }, [TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = { .name = "Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick", .tuner_type = TUNER_XC2028, /* has a XC3028 */ .tuner_addr = 0xc2 >> 1, .demod_addr = 0x1e >> 1, .type = TM6010, .caps = { .has_tuner = 1, .has_dvb = 1, .has_zl10353 = 1, .has_eeprom = 1, .has_remote = 1, .has_radio = 1, }, .gpio = { .tuner_reset = TM6010_GPIO_2, .tuner_on = TM6010_GPIO_3, .demod_reset = TM6010_GPIO_1, .demod_on = TM6010_GPIO_4, .power_led = TM6010_GPIO_7, .dvb_led = TM6010_GPIO_5, .ir = TM6010_GPIO_0, }, .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, .vinput = { { .type = TM6000_INPUT_TV, .vmux = TM6000_VMUX_VIDEO_B, .amux = TM6000_AMUX_SIF1, }, { .type = TM6000_INPUT_COMPOSITE1, .vmux = TM6000_VMUX_VIDEO_A, .amux = TM6000_AMUX_ADC2, }, { .type = TM6000_INPUT_SVIDEO, .vmux = TM6000_VMUX_VIDEO_AB, .amux = TM6000_AMUX_ADC2, }, }, .rinput = { .type = TM6000_INPUT_RADIO, .amux = TM6000_AMUX_SIF1, }, }, [TM5600_BOARD_TERRATEC_GRABSTER] = { .name = "Terratec Grabster AV 150/250 MX", .type = TM5600, .tuner_type = TUNER_ABSENT, .vinput = { { .type = TM6000_INPUT_TV, .vmux = TM6000_VMUX_VIDEO_B, .amux = TM6000_AMUX_ADC1, }, { .type = TM6000_INPUT_COMPOSITE1, .vmux = TM6000_VMUX_VIDEO_A, .amux = TM6000_AMUX_ADC2, }, { .type = TM6000_INPUT_SVIDEO, .vmux = TM6000_VMUX_VIDEO_AB, .amux = TM6000_AMUX_ADC2, }, }, }, [TM6010_BOARD_TWINHAN_TU501] = { .name = "Twinhan TU501(704D1)", .tuner_type = TUNER_XC2028, /* has a XC3028 */ .tuner_addr = 0xc2 >> 1, .demod_addr = 0x1e >> 1, .type = TM6010, .caps = { .has_tuner = 1, .has_dvb = 1, .has_zl10353 = 1, .has_eeprom = 1, .has_remote = 1, }, .gpio = { .tuner_reset = TM6010_GPIO_2, .tuner_on = TM6010_GPIO_3, .demod_reset = TM6010_GPIO_1, .demod_on = TM6010_GPIO_4, .power_led = TM6010_GPIO_7, .dvb_led = TM6010_GPIO_5, .ir = TM6010_GPIO_0, }, .vinput = { { .type = TM6000_INPUT_TV, .vmux = TM6000_VMUX_VIDEO_B, .amux = TM6000_AMUX_SIF1, }, { .type = TM6000_INPUT_COMPOSITE1, .vmux = TM6000_VMUX_VIDEO_A, .amux = TM6000_AMUX_ADC2, }, { .type = TM6000_INPUT_SVIDEO, .vmux = TM6000_VMUX_VIDEO_AB, .amux = TM6000_AMUX_ADC2, }, }, }, [TM6010_BOARD_BEHOLD_WANDER_LITE] = { .name = "Beholder Wander Lite DVB-T/TV/FM USB2.0", .tuner_type = TUNER_XC5000, .tuner_addr = 0xc2 >> 1, .demod_addr = 0x1e >> 1, .type = TM6010, .caps = { .has_tuner = 1, .has_dvb = 1, .has_zl10353 = 1, .has_eeprom = 1, .has_remote = 0, .has_radio = 1, }, .gpio = { .tuner_reset = TM6010_GPIO_0, .demod_reset = TM6010_GPIO_1, .power_led = TM6010_GPIO_6, }, .vinput = { { .type = TM6000_INPUT_TV, .vmux = TM6000_VMUX_VIDEO_B, .amux = TM6000_AMUX_SIF1, }, }, .rinput = { .type = TM6000_INPUT_RADIO, .amux = TM6000_AMUX_ADC1, }, }, [TM6010_BOARD_BEHOLD_VOYAGER_LITE] = { .name = "Beholder Voyager Lite TV/FM USB2.0", .tuner_type = TUNER_XC5000, .tuner_addr = 0xc2 >> 1, .type = TM6010, .caps = { .has_tuner = 1, .has_dvb = 0, .has_zl10353 = 0, .has_eeprom = 1, .has_remote = 0, .has_radio = 1, }, .gpio = { .tuner_reset = TM6010_GPIO_0, .power_led = TM6010_GPIO_6, }, .vinput = { { .type = TM6000_INPUT_TV, .vmux = TM6000_VMUX_VIDEO_B, .amux = TM6000_AMUX_SIF1, }, }, .rinput = { .type = TM6000_INPUT_RADIO, .amux = TM6000_AMUX_ADC1, }, }, }; /* table of devices that work with this driver */ static const struct usb_device_id tm6000_id_table[] = { { USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_GENERIC }, { USB_DEVICE(0x6000, 0x0002), .driver_info = TM6010_BOARD_GENERIC }, { USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV }, { USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR }, { USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV }, { USB_DEVICE(0x2040, 0x6600), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, { USB_DEVICE(0x2040, 0x6601), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, { USB_DEVICE(0x2040, 0x6610), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, { USB_DEVICE(0x2040, 0x6611), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, { USB_DEVICE(0x6000, 0xdec0), .driver_info = TM6010_BOARD_BEHOLD_WANDER }, { USB_DEVICE(0x6000, 0xdec1), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER }, { USB_DEVICE(0x0ccd, 0x0086), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE }, { USB_DEVICE(0x0ccd, 0x00A5), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE }, { USB_DEVICE(0x0ccd, 0x0079), .driver_info = TM5600_BOARD_TERRATEC_GRABSTER }, { USB_DEVICE(0x13d3, 0x3240), .driver_info = TM6010_BOARD_TWINHAN_TU501 }, { USB_DEVICE(0x13d3, 0x3241), .driver_info = TM6010_BOARD_TWINHAN_TU501 }, { USB_DEVICE(0x13d3, 0x3243), .driver_info = TM6010_BOARD_TWINHAN_TU501 }, { USB_DEVICE(0x13d3, 0x3264), .driver_info = TM6010_BOARD_TWINHAN_TU501 }, { USB_DEVICE(0x6000, 0xdec2), .driver_info = TM6010_BOARD_BEHOLD_WANDER_LITE }, { USB_DEVICE(0x6000, 0xdec3), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER_LITE }, { } }; MODULE_DEVICE_TABLE(usb, tm6000_id_table); /* Control power led for show some activity */ void tm6000_flash_led(struct tm6000_core *dev, u8 state) { /* Power LED unconfigured */ if (!dev->gpio.power_led) return; /* ON Power LED */ if (state) { switch (dev->model) { case TM6010_BOARD_HAUPPAUGE_900H: case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: case TM6010_BOARD_TWINHAN_TU501: tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00); break; case TM6010_BOARD_BEHOLD_WANDER: case TM6010_BOARD_BEHOLD_VOYAGER: case TM6010_BOARD_BEHOLD_WANDER_LITE: case TM6010_BOARD_BEHOLD_VOYAGER_LITE: tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01); break; } } /* OFF Power LED */ else { switch (dev->model) { case TM6010_BOARD_HAUPPAUGE_900H: case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: case TM6010_BOARD_TWINHAN_TU501: tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01); break; case TM6010_BOARD_BEHOLD_WANDER: case TM6010_BOARD_BEHOLD_VOYAGER: case TM6010_BOARD_BEHOLD_WANDER_LITE: case TM6010_BOARD_BEHOLD_VOYAGER_LITE: tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00); break; } } } /* Tuner callback to provide the proper gpio changes needed for xc5000 */ int tm6000_xc5000_callback(void *ptr, int component, int command, int arg) { int rc = 0; struct tm6000_core *dev = ptr; if (dev->tuner_type != TUNER_XC5000) return 0; switch (command) { case XC5000_TUNER_RESET: tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_reset, 0x01); msleep(15); tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_reset, 0x00); msleep(15); tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_reset, 0x01); break; } return rc; } EXPORT_SYMBOL_GPL(tm6000_xc5000_callback); /* Tuner callback to provide the proper gpio changes needed for xc2028 */ int tm6000_tuner_callback(void *ptr, int component, int command, int arg) { int rc = 0; struct tm6000_core *dev = ptr; if (dev->tuner_type != TUNER_XC2028) return 0; switch (command) { case XC2028_RESET_CLK: tm6000_ir_wait(dev, 0); tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x02, arg); msleep(10); rc = tm6000_i2c_reset(dev, 10); break; case XC2028_TUNER_RESET: /* Reset codes during load firmware */ switch (arg) { case 0: /* newer tuner can faster reset */ switch (dev->model) { case TM5600_BOARD_10MOONS_UT821: tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_reset, 0x01); tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, 0x300, 0x01); msleep(10); tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_reset, 0x00); tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, 0x300, 0x00); msleep(10); tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_reset, 0x01); tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, 0x300, 0x01); break; case TM6010_BOARD_HAUPPAUGE_900H: case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: case TM6010_BOARD_TWINHAN_TU501: tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_reset, 0x01); msleep(60); tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_reset, 0x00); msleep(75); tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_reset, 0x01); msleep(60); break; default: tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_reset, 0x00); msleep(130); tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_reset, 0x01); msleep(130); break; } tm6000_ir_wait(dev, 1); break; case 1: tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x02, 0x01); msleep(10); break; case 2: rc = tm6000_i2c_reset(dev, 100); break; } break; case XC2028_I2C_FLUSH: tm6000_set_reg(dev, REQ_50_SET_START, 0, 0); tm6000_set_reg(dev, REQ_51_SET_STOP, 0, 0); break; } return rc; } EXPORT_SYMBOL_GPL(tm6000_tuner_callback); int tm6000_cards_setup(struct tm6000_core *dev) { /* * Board-specific initialization sequence. Handles all GPIO * initialization sequences that are board-specific. * Up to now, all found devices use GPIO1 and GPIO4 at the same way. * Probably, they're all based on some reference device. Due to that, * there's a common routine at the end to handle those GPIO's. Devices * that use different pinups or init sequences can just return at * the board-specific session. */ switch (dev->model) { case TM6010_BOARD_HAUPPAUGE_900H: case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: case TM6010_BOARD_TWINHAN_TU501: case TM6010_BOARD_GENERIC: /* Turn xceive 3028 on */ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_on, 0x01); msleep(15); /* Turn zarlink zl10353 on */ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00); msleep(15); /* Reset zarlink zl10353 */ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00); msleep(50); tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01); msleep(15); /* Turn zarlink zl10353 off */ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x01); msleep(15); /* ir ? */ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.ir, 0x01); msleep(15); /* Power led on (blue) */ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00); msleep(15); /* DVB led off (orange) */ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.dvb_led, 0x01); msleep(15); /* Turn zarlink zl10353 on */ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00); msleep(15); break; case TM6010_BOARD_BEHOLD_WANDER: case TM6010_BOARD_BEHOLD_WANDER_LITE: /* Power led on (blue) */ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01); msleep(15); /* Reset zarlink zl10353 */ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00); msleep(50); tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01); msleep(15); break; case TM6010_BOARD_BEHOLD_VOYAGER: case TM6010_BOARD_BEHOLD_VOYAGER_LITE: /* Power led on (blue) */ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01); msleep(15); break; default: break; } /* * Default initialization. Most of the devices seem to use GPIO1 * and GPIO4.on the same way, so, this handles the common sequence * used by most devices. * If a device uses a different sequence or different GPIO pins for * reset, just add the code at the board-specific part */ if (dev->gpio.tuner_reset) { int rc; int i; for (i = 0; i < 2; i++) { rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_reset, 0x00); if (rc < 0) { printk(KERN_ERR "Error %i doing tuner reset\n", rc); return rc; } msleep(10); /* Just to be conservative */ rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_reset, 0x01); if (rc < 0) { printk(KERN_ERR "Error %i doing tuner reset\n", rc); return rc; } } } else { printk(KERN_ERR "Tuner reset is not configured\n"); return -1; } msleep(50); return 0; }; static void tm6000_config_tuner(struct tm6000_core *dev) { struct tuner_setup tun_setup; /* Load tuner module */ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tuner", dev->tuner_addr, NULL); memset(&tun_setup, 0, sizeof(tun_setup)); tun_setup.type = dev->tuner_type; tun_setup.addr = dev->tuner_addr; tun_setup.mode_mask = 0; if (dev->caps.has_tuner) tun_setup.mode_mask |= (T_ANALOG_TV | T_RADIO); switch (dev->tuner_type) { case TUNER_XC2028: tun_setup.tuner_callback = tm6000_tuner_callback; break; case TUNER_XC5000: tun_setup.tuner_callback = tm6000_xc5000_callback; break; } v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup); switch (dev->tuner_type) { case TUNER_XC2028: { struct v4l2_priv_tun_config xc2028_cfg; struct xc2028_ctrl ctl; memset(&xc2028_cfg, 0, sizeof(xc2028_cfg)); memset(&ctl, 0, sizeof(ctl)); ctl.demod = XC3028_FE_ZARLINK456; xc2028_cfg.tuner = TUNER_XC2028; xc2028_cfg.priv = &ctl; switch (dev->model) { case TM6010_BOARD_HAUPPAUGE_900H: case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: case TM6010_BOARD_TWINHAN_TU501: ctl.max_len = 80; ctl.fname = "xc3028L-v36.fw"; break; default: if (dev->dev_type == TM6010) ctl.fname = "xc3028-v27.fw"; else ctl.fname = "xc3028-v24.fw"; } printk(KERN_INFO "Setting firmware parameters for xc2028\n"); v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg); } break; case TUNER_XC5000: { struct v4l2_priv_tun_config xc5000_cfg; struct xc5000_config ctl = { .i2c_address = dev->tuner_addr, .if_khz = 4570, .radio_input = XC5000_RADIO_FM1_MONO, }; xc5000_cfg.tuner = TUNER_XC5000; xc5000_cfg.priv = &ctl; v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc5000_cfg); } break; default: printk(KERN_INFO "Unknown tuner type. Tuner is not configured.\n"); break; } } static int fill_board_specific_data(struct tm6000_core *dev) { int rc; dev->dev_type = tm6000_boards[dev->model].type; dev->tuner_type = tm6000_boards[dev->model].tuner_type; dev->tuner_addr = tm6000_boards[dev->model].tuner_addr; dev->gpio = tm6000_boards[dev->model].gpio; dev->ir_codes = tm6000_boards[dev->model].ir_codes; dev->demod_addr = tm6000_boards[dev->model].demod_addr; dev->caps = tm6000_boards[dev->model].caps; dev->vinput[0] = tm6000_boards[dev->model].vinput[0]; dev->vinput[1] = tm6000_boards[dev->model].vinput[1]; dev->vinput[2] = tm6000_boards[dev->model].vinput[2]; dev->rinput = tm6000_boards[dev->model].rinput; /* setup per-model quirks */ switch (dev->model) { case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: case TM6010_BOARD_HAUPPAUGE_900H: dev->quirks |= TM6000_QUIRK_NO_USB_DELAY; break; default: break; } /* initialize hardware */ rc = tm6000_init(dev); if (rc < 0) return rc; return v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev); } static void use_alternative_detection_method(struct tm6000_core *dev) { int i, model = -1; if (!dev->eedata_size) return; for (i = 0; i < ARRAY_SIZE(tm6000_boards); i++) { if (!tm6000_boards[i].eename_size) continue; if (dev->eedata_size < tm6000_boards[i].eename_pos + tm6000_boards[i].eename_size) continue; if (!memcmp(&dev->eedata[tm6000_boards[i].eename_pos], tm6000_boards[i].eename, tm6000_boards[i].eename_size)) { model = i; break; } } if (model < 0) { printk(KERN_INFO "Device has eeprom but is currently unknown\n"); return; } dev->model = model; printk(KERN_INFO "Device identified via eeprom as %s (type = %d)\n", tm6000_boards[model].name, model); } #if defined(CONFIG_MODULES) && defined(MODULE) static void request_module_async(struct work_struct *work) { struct tm6000_core *dev = container_of(work, struct tm6000_core, request_module_wk); request_module("tm6000-alsa"); if (dev->caps.has_dvb) request_module("tm6000-dvb"); } static void request_modules(struct tm6000_core *dev) { INIT_WORK(&dev->request_module_wk, request_module_async); schedule_work(&dev->request_module_wk); } static void flush_request_modules(struct tm6000_core *dev) { flush_work(&dev->request_module_wk); } #else #define request_modules(dev) #define flush_request_modules(dev) #endif /* CONFIG_MODULES */ static int tm6000_init_dev(struct tm6000_core *dev) { struct v4l2_frequency f; int rc = 0; mutex_init(&dev->lock); mutex_lock(&dev->lock); if (!is_generic(dev->model)) { rc = fill_board_specific_data(dev); if (rc < 0) goto err; /* register i2c bus */ rc = tm6000_i2c_register(dev); if (rc < 0) goto err; } else { /* register i2c bus */ rc = tm6000_i2c_register(dev); if (rc < 0) goto err; use_alternative_detection_method(dev); rc = fill_board_specific_data(dev); if (rc < 0) goto err; } /* Default values for STD and resolutions */ dev->width = 720; dev->height = 480; dev->norm = V4L2_STD_NTSC_M; /* Configure tuner */ tm6000_config_tuner(dev); /* Set video standard */ v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, dev->norm); /* Set tuner frequency - also loads firmware on xc2028/xc3028 */ f.tuner = 0; f.type = V4L2_TUNER_ANALOG_TV; f.frequency = 3092; /* 193.25 MHz */ dev->freq = f.frequency; v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f); if (dev->caps.has_tda9874) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tvaudio", I2C_ADDR_TDA9874, NULL); /* register and initialize V4L2 */ rc = tm6000_v4l2_register(dev); if (rc < 0) goto err; tm6000_add_into_devlist(dev); tm6000_init_extension(dev); tm6000_ir_init(dev); request_modules(dev); mutex_unlock(&dev->lock); return 0; err: mutex_unlock(&dev->lock); return rc; } /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) static void get_max_endpoint(struct usb_device *udev, struct usb_host_interface *alt, char *msgtype, struct usb_host_endpoint *curr_e, struct tm6000_endpoint *tm_ep) { u16 tmp = le16_to_cpu(curr_e->desc.wMaxPacketSize); unsigned int size = tmp & 0x7ff; if (udev->speed == USB_SPEED_HIGH) size = size * hb_mult(tmp); if (size > tm_ep->maxsize) { tm_ep->endp = curr_e; tm_ep->maxsize = size; tm_ep->bInterfaceNumber = alt->desc.bInterfaceNumber; tm_ep->bAlternateSetting = alt->desc.bAlternateSetting; printk(KERN_INFO "tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n", msgtype, curr_e->desc.bEndpointAddress, size); } } /* * tm6000_usb_probe() * checks for supported devices */ static int tm6000_usb_probe(struct usb_interface *interface, const struct usb_device_id *id) { struct usb_device *usbdev; struct tm6000_core *dev; int i, rc; int nr = 0; char *speed; usbdev = usb_get_dev(interface_to_usbdev(interface)); /* Selects the proper interface */ rc = usb_set_interface(usbdev, 0, 1); if (rc < 0) goto report_failure; /* Check to see next free device and mark as used */ nr = find_first_zero_bit(&tm6000_devused, TM6000_MAXBOARDS); if (nr >= TM6000_MAXBOARDS) { printk(KERN_ERR "tm6000: Supports only %i tm60xx boards.\n", TM6000_MAXBOARDS); rc = -ENOMEM; goto put_device; } /* Create and initialize dev struct */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) { rc = -ENOMEM; goto put_device; } spin_lock_init(&dev->slock); mutex_init(&dev->usb_lock); /* Increment usage count */ set_bit(nr, &tm6000_devused); snprintf(dev->name, 29, "tm6000 #%d", nr); dev->model = id->driver_info; if (card[nr] < ARRAY_SIZE(tm6000_boards)) dev->model = card[nr]; dev->udev = usbdev; dev->devno = nr; switch (usbdev->speed) { case USB_SPEED_LOW: speed = "1.5"; break; case USB_SPEED_UNKNOWN: case USB_SPEED_FULL: speed = "12"; break; case USB_SPEED_HIGH: speed = "480"; break; default: speed = "unknown"; } /* Get endpoints */ for (i = 0; i < interface->num_altsetting; i++) { int ep; for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) { struct usb_host_endpoint *e; int dir_out; e = &interface->altsetting[i].endpoint[ep]; dir_out = ((e->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); printk(KERN_INFO "tm6000: alt %d, interface %i, class %i\n", i, interface->altsetting[i].desc.bInterfaceNumber, interface->altsetting[i].desc.bInterfaceClass); switch (e->desc.bmAttributes) { case USB_ENDPOINT_XFER_BULK: if (!dir_out) { get_max_endpoint(usbdev, &interface->altsetting[i], "Bulk IN", e, &dev->bulk_in); } else { get_max_endpoint(usbdev, &interface->altsetting[i], "Bulk OUT", e, &dev->bulk_out); } break; case USB_ENDPOINT_XFER_ISOC: if (!dir_out) { get_max_endpoint(usbdev, &interface->altsetting[i], "ISOC IN", e, &dev->isoc_in); } else { get_max_endpoint(usbdev, &interface->altsetting[i], "ISOC OUT", e, &dev->isoc_out); } break; case USB_ENDPOINT_XFER_INT: if (!dir_out) { get_max_endpoint(usbdev, &interface->altsetting[i], "INT IN", e, &dev->int_in); } else { get_max_endpoint(usbdev, &interface->altsetting[i], "INT OUT", e, &dev->int_out); } break; } } } printk(KERN_INFO "tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n", speed, le16_to_cpu(dev->udev->descriptor.idVendor), le16_to_cpu(dev->udev->descriptor.idProduct), interface->altsetting->desc.bInterfaceNumber); /* check if the the device has the iso in endpoint at the correct place */ if (!dev->isoc_in.endp) { printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n"); rc = -ENODEV; goto free_device; } /* save our data pointer in this interface device */ usb_set_intfdata(interface, dev); printk(KERN_INFO "tm6000: Found %s\n", tm6000_boards[dev->model].name); rc = tm6000_init_dev(dev); if (rc < 0) goto free_device; return 0; free_device: kfree(dev); report_failure: printk(KERN_ERR "tm6000: Error %d while registering\n", rc); clear_bit(nr, &tm6000_devused); put_device: usb_put_dev(usbdev); return rc; } /* * tm6000_usb_disconnect() * called when the device gets disconnected * video device will be unregistered on v4l2_close in case it is still open */ static void tm6000_usb_disconnect(struct usb_interface *interface) { struct tm6000_core *dev = usb_get_intfdata(interface); usb_set_intfdata(interface, NULL); if (!dev) return; printk(KERN_INFO "tm6000: disconnecting %s\n", dev->name); flush_request_modules(dev); tm6000_ir_fini(dev); if (dev->gpio.power_led) { switch (dev->model) { case TM6010_BOARD_HAUPPAUGE_900H: case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: case TM6010_BOARD_TWINHAN_TU501: /* Power led off */ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01); msleep(15); break; case TM6010_BOARD_BEHOLD_WANDER: case TM6010_BOARD_BEHOLD_VOYAGER: case TM6010_BOARD_BEHOLD_WANDER_LITE: case TM6010_BOARD_BEHOLD_VOYAGER_LITE: /* Power led off */ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00); msleep(15); break; } } tm6000_v4l2_unregister(dev); tm6000_i2c_unregister(dev); v4l2_device_unregister(&dev->v4l2_dev); dev->state |= DEV_DISCONNECTED; usb_put_dev(dev->udev); tm6000_close_extension(dev); tm6000_remove_from_devlist(dev); clear_bit(dev->devno, &tm6000_devused); kfree(dev); } static struct usb_driver tm6000_usb_driver = { .name = "tm6000", .probe = tm6000_usb_probe, .disconnect = tm6000_usb_disconnect, .id_table = tm6000_id_table, }; module_usb_driver(tm6000_usb_driver); MODULE_DESCRIPTION("Trident TVMaster TM5600/TM6000/TM6010 USB2 adapter"); MODULE_AUTHOR("Mauro Carvalho Chehab"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1