Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Anton Vorontsov | 1375 | 97.73% | 1 | 10.00% |
Linus Walleij | 15 | 1.07% | 1 | 10.00% |
Guilherme Maciel Ferreira | 8 | 0.57% | 1 | 10.00% |
Sergei Shtylyov | 5 | 0.36% | 3 | 30.00% |
Greg Kroah-Hartman | 2 | 0.14% | 2 | 20.00% |
Zhao Qiang | 1 | 0.07% | 1 | 10.00% |
Eric Lescouet | 1 | 0.07% | 1 | 10.00% |
Total | 1407 | 10 |
// SPDX-License-Identifier: GPL-2.0+ /* * Freescale QUICC Engine USB Host Controller Driver * * Copyright (c) Freescale Semicondutor, Inc. 2006. * Shlomi Gridish <gridish@freescale.com> * Jerry Huang <Chang-Ming.Huang@freescale.com> * Copyright (c) Logic Product Development, Inc. 2007 * Peter Barada <peterb@logicpd.com> * Copyright (c) MontaVista Software, Inc. 2008. * Anton Vorontsov <avorontsov@ru.mvista.com> */ #include <linux/kernel.h> #include <linux/types.h> #include <linux/spinlock.h> #include <linux/delay.h> #include <linux/errno.h> #include <linux/io.h> #include <linux/usb.h> #include <linux/usb/hcd.h> #include <linux/gpio/consumer.h> #include <soc/fsl/qe/qe.h> #include "fhci.h" /* virtual root hub specific descriptor */ static u8 root_hub_des[] = { 0x09, /* blength */ USB_DT_HUB, /* bDescriptorType;hub-descriptor */ 0x01, /* bNbrPorts */ HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_NO_OCPM, /* wHubCharacteristics */ 0x00, /* per-port power, no overcurrent */ 0x01, /* bPwrOn2pwrGood;2ms */ 0x00, /* bHubContrCurrent;0mA */ 0x00, /* DeviceRemoveable */ 0xff, /* PortPwrCtrlMask */ }; static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on) { struct gpio_desc *gpiod = fhci->gpiods[gpio_nr]; if (!gpiod) return; gpiod_set_value(gpiod, on); mdelay(5); } void fhci_config_transceiver(struct fhci_hcd *fhci, enum fhci_port_status status) { fhci_dbg(fhci, "-> %s: %d\n", __func__, status); switch (status) { case FHCI_PORT_POWER_OFF: fhci_gpio_set_value(fhci, GPIO_POWER, false); break; case FHCI_PORT_DISABLED: case FHCI_PORT_WAITING: fhci_gpio_set_value(fhci, GPIO_POWER, true); break; case FHCI_PORT_LOW: fhci_gpio_set_value(fhci, GPIO_SPEED, false); break; case FHCI_PORT_FULL: fhci_gpio_set_value(fhci, GPIO_SPEED, true); break; default: WARN_ON(1); break; } fhci_dbg(fhci, "<- %s: %d\n", __func__, status); } /* disable the USB port by clearing the EN bit in the USBMOD register */ void fhci_port_disable(struct fhci_hcd *fhci) { struct fhci_usb *usb = (struct fhci_usb *)fhci->usb_lld; enum fhci_port_status port_status; fhci_dbg(fhci, "-> %s\n", __func__); fhci_stop_sof_timer(fhci); fhci_flush_all_transmissions(usb); fhci_usb_disable_interrupt((struct fhci_usb *)fhci->usb_lld); port_status = usb->port_status; usb->port_status = FHCI_PORT_DISABLED; /* Enable IDLE since we want to know if something comes along */ usb->saved_msk |= USB_E_IDLE_MASK; out_be16(&usb->fhci->regs->usb_usbmr, usb->saved_msk); /* check if during the disconnection process attached new device */ if (port_status == FHCI_PORT_WAITING) fhci_device_connected_interrupt(fhci); usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_ENABLE; usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE; fhci_usb_enable_interrupt((struct fhci_usb *)fhci->usb_lld); fhci_dbg(fhci, "<- %s\n", __func__); } /* enable the USB port by setting the EN bit in the USBMOD register */ void fhci_port_enable(void *lld) { struct fhci_usb *usb = (struct fhci_usb *)lld; struct fhci_hcd *fhci = usb->fhci; fhci_dbg(fhci, "-> %s\n", __func__); fhci_config_transceiver(fhci, usb->port_status); if ((usb->port_status != FHCI_PORT_FULL) && (usb->port_status != FHCI_PORT_LOW)) fhci_start_sof_timer(fhci); usb->vroot_hub->port.wPortStatus |= USB_PORT_STAT_ENABLE; usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE; fhci_dbg(fhci, "<- %s\n", __func__); } void fhci_io_port_generate_reset(struct fhci_hcd *fhci) { fhci_dbg(fhci, "-> %s\n", __func__); gpiod_direction_output(fhci->gpiods[GPIO_USBOE], 0); gpiod_direction_output(fhci->gpiods[GPIO_USBTP], 0); gpiod_direction_output(fhci->gpiods[GPIO_USBTN], 0); mdelay(5); qe_pin_set_dedicated(fhci->pins[PIN_USBOE]); qe_pin_set_dedicated(fhci->pins[PIN_USBTP]); qe_pin_set_dedicated(fhci->pins[PIN_USBTN]); fhci_dbg(fhci, "<- %s\n", __func__); } /* generate the RESET condition on the bus */ void fhci_port_reset(void *lld) { struct fhci_usb *usb = (struct fhci_usb *)lld; struct fhci_hcd *fhci = usb->fhci; u8 mode; u16 mask; fhci_dbg(fhci, "-> %s\n", __func__); fhci_stop_sof_timer(fhci); /* disable the USB controller */ mode = in_8(&fhci->regs->usb_usmod); out_8(&fhci->regs->usb_usmod, mode & (~USB_MODE_EN)); /* disable idle interrupts */ mask = in_be16(&fhci->regs->usb_usbmr); out_be16(&fhci->regs->usb_usbmr, mask & (~USB_E_IDLE_MASK)); fhci_io_port_generate_reset(fhci); /* enable interrupt on this endpoint */ out_be16(&fhci->regs->usb_usbmr, mask); /* enable the USB controller */ mode = in_8(&fhci->regs->usb_usmod); out_8(&fhci->regs->usb_usmod, mode | USB_MODE_EN); fhci_start_sof_timer(fhci); fhci_dbg(fhci, "<- %s\n", __func__); } int fhci_hub_status_data(struct usb_hcd *hcd, char *buf) { struct fhci_hcd *fhci = hcd_to_fhci(hcd); int ret = 0; unsigned long flags; fhci_dbg(fhci, "-> %s\n", __func__); spin_lock_irqsave(&fhci->lock, flags); if (fhci->vroot_hub->port.wPortChange & (USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_SUSPEND | USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_OVERCURRENT)) { *buf = 1 << 1; ret = 1; fhci_dbg(fhci, "-- %s\n", __func__); } spin_unlock_irqrestore(&fhci->lock, flags); fhci_dbg(fhci, "<- %s\n", __func__); return ret; } int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { struct fhci_hcd *fhci = hcd_to_fhci(hcd); int retval = 0; struct usb_hub_status *hub_status; struct usb_port_status *port_status; unsigned long flags; spin_lock_irqsave(&fhci->lock, flags); fhci_dbg(fhci, "-> %s\n", __func__); switch (typeReq) { case ClearHubFeature: switch (wValue) { case C_HUB_LOCAL_POWER: case C_HUB_OVER_CURRENT: break; default: goto error; } break; case ClearPortFeature: fhci->vroot_hub->feature &= (1 << wValue); switch (wValue) { case USB_PORT_FEAT_ENABLE: fhci->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_ENABLE; fhci_port_disable(fhci); break; case USB_PORT_FEAT_C_ENABLE: fhci->vroot_hub->port.wPortChange &= ~USB_PORT_STAT_C_ENABLE; break; case USB_PORT_FEAT_SUSPEND: fhci->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_SUSPEND; fhci_stop_sof_timer(fhci); break; case USB_PORT_FEAT_C_SUSPEND: fhci->vroot_hub->port.wPortChange &= ~USB_PORT_STAT_C_SUSPEND; break; case USB_PORT_FEAT_POWER: fhci->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_POWER; fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); break; case USB_PORT_FEAT_C_CONNECTION: fhci->vroot_hub->port.wPortChange &= ~USB_PORT_STAT_C_CONNECTION; break; case USB_PORT_FEAT_C_OVER_CURRENT: fhci->vroot_hub->port.wPortChange &= ~USB_PORT_STAT_C_OVERCURRENT; break; case USB_PORT_FEAT_C_RESET: fhci->vroot_hub->port.wPortChange &= ~USB_PORT_STAT_C_RESET; break; default: goto error; } break; case GetHubDescriptor: memcpy(buf, root_hub_des, sizeof(root_hub_des)); break; case GetHubStatus: hub_status = (struct usb_hub_status *)buf; hub_status->wHubStatus = cpu_to_le16(fhci->vroot_hub->hub.wHubStatus); hub_status->wHubChange = cpu_to_le16(fhci->vroot_hub->hub.wHubChange); break; case GetPortStatus: port_status = (struct usb_port_status *)buf; port_status->wPortStatus = cpu_to_le16(fhci->vroot_hub->port.wPortStatus); port_status->wPortChange = cpu_to_le16(fhci->vroot_hub->port.wPortChange); break; case SetHubFeature: switch (wValue) { case C_HUB_OVER_CURRENT: case C_HUB_LOCAL_POWER: break; default: goto error; } break; case SetPortFeature: fhci->vroot_hub->feature |= (1 << wValue); switch (wValue) { case USB_PORT_FEAT_ENABLE: fhci->vroot_hub->port.wPortStatus |= USB_PORT_STAT_ENABLE; fhci_port_enable(fhci->usb_lld); break; case USB_PORT_FEAT_SUSPEND: fhci->vroot_hub->port.wPortStatus |= USB_PORT_STAT_SUSPEND; fhci_stop_sof_timer(fhci); break; case USB_PORT_FEAT_RESET: fhci->vroot_hub->port.wPortStatus |= USB_PORT_STAT_RESET; fhci_port_reset(fhci->usb_lld); fhci->vroot_hub->port.wPortStatus |= USB_PORT_STAT_ENABLE; fhci->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_RESET; break; case USB_PORT_FEAT_POWER: fhci->vroot_hub->port.wPortStatus |= USB_PORT_STAT_POWER; fhci_config_transceiver(fhci, FHCI_PORT_WAITING); break; default: goto error; } break; default: error: retval = -EPIPE; } fhci_dbg(fhci, "<- %s\n", __func__); spin_unlock_irqrestore(&fhci->lock, flags); return retval; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1