Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Sudeep Holla | 1766 | 31.11% | 3 | 1.66% |
Len Brown | 1382 | 24.35% | 36 | 19.89% |
Venkatesh Pallipadi | 405 | 7.14% | 23 | 12.71% |
Rafael J. Wysocki | 368 | 6.48% | 16 | 8.84% |
Deepthi Dharwar | 238 | 4.19% | 2 | 1.10% |
Peter Zijlstra | 237 | 4.18% | 8 | 4.42% |
Mario Limonciello | 230 | 4.05% | 2 | 1.10% |
Daniel Lezcano | 147 | 2.59% | 3 | 1.66% |
Andy Grover | 139 | 2.45% | 4 | 2.21% |
Thomas Gleixner | 101 | 1.78% | 8 | 4.42% |
Shaohua Li | 62 | 1.09% | 4 | 2.21% |
Yazen Ghannam | 56 | 0.99% | 2 | 1.10% |
Boris Ostrovsky | 53 | 0.93% | 1 | 0.55% |
Arjan van de Ven | 42 | 0.74% | 1 | 0.55% |
Andi Kleen | 41 | 0.72% | 2 | 1.10% |
Thomas Renninger | 40 | 0.70% | 2 | 1.10% |
Hidetoshi Seto | 32 | 0.56% | 1 | 0.55% |
Alex Shi | 29 | 0.51% | 1 | 0.55% |
Yin Fengwei | 29 | 0.51% | 1 | 0.55% |
Alexey Y. Starikovskiy | 28 | 0.49% | 3 | 1.66% |
Patrick Mochel | 26 | 0.46% | 2 | 1.10% |
Ashwin Chaugule | 14 | 0.25% | 2 | 1.10% |
Stéphane Eranian | 13 | 0.23% | 1 | 0.55% |
Suresh B. Siddha | 12 | 0.21% | 1 | 0.55% |
Dave Hansen | 11 | 0.19% | 1 | 0.55% |
Janosch Machowinski | 10 | 0.18% | 1 | 0.55% |
Neal Liu | 10 | 0.18% | 2 | 1.10% |
Vitaly Kuznetsov | 10 | 0.18% | 2 | 1.10% |
Robert Moore | 10 | 0.18% | 2 | 1.10% |
Ville Syrjälä | 8 | 0.14% | 1 | 0.55% |
Guo Zhengkui | 7 | 0.12% | 1 | 0.55% |
Yajun Deng | 7 | 0.12% | 1 | 0.55% |
H. Peter Anvin | 7 | 0.12% | 2 | 1.10% |
Richard Gong | 6 | 0.11% | 1 | 0.55% |
Wei Yongjun | 6 | 0.11% | 1 | 0.55% |
Bartlomiej Zolnierkiewicz | 6 | 0.11% | 1 | 0.55% |
lily | 6 | 0.11% | 1 | 0.55% |
Lan Tianyu | 5 | 0.09% | 1 | 0.55% |
Dave Jones | 5 | 0.09% | 1 | 0.55% |
Sekhar Nori | 5 | 0.09% | 2 | 1.10% |
Borislav Petkov | 4 | 0.07% | 1 | 0.55% |
Jiri Kosina | 4 | 0.07% | 1 | 0.55% |
Wolfram Sang | 4 | 0.07% | 1 | 0.55% |
Linus Torvalds (pre-git) | 3 | 0.05% | 2 | 1.10% |
David Wang | 3 | 0.05% | 1 | 0.55% |
Nico Pitre | 3 | 0.05% | 1 | 0.55% |
Glauber de Oliveira Costa | 3 | 0.05% | 1 | 0.55% |
Frédéric Weisbecker | 3 | 0.05% | 1 | 0.55% |
Dmitry Torokhov | 3 | 0.05% | 1 | 0.55% |
Paul E. McKenney | 3 | 0.05% | 1 | 0.55% |
Tony W Wang-oc | 3 | 0.05% | 1 | 0.55% |
Guilherme G. Piccoli | 3 | 0.05% | 1 | 0.55% |
Pu Wen | 3 | 0.05% | 1 | 0.55% |
Mike Travis | 2 | 0.04% | 1 | 0.55% |
Darrick J. Wong | 2 | 0.04% | 1 | 0.55% |
Linus Torvalds | 2 | 0.04% | 2 | 1.10% |
Nicholas Piggin | 2 | 0.04% | 1 | 0.55% |
Chris Metcalf | 2 | 0.04% | 1 | 0.55% |
Pavel Machek | 2 | 0.04% | 1 | 0.55% |
Yasuaki Ishimatsu | 2 | 0.04% | 1 | 0.55% |
Sebastian Andrzej Siewior | 2 | 0.04% | 1 | 0.55% |
Gustavo A. R. Silva | 2 | 0.04% | 1 | 0.55% |
Christoph Lameter | 1 | 0.02% | 1 | 0.55% |
Andreas Mohr | 1 | 0.02% | 1 | 0.55% |
Rui Zhang | 1 | 0.02% | 1 | 0.55% |
Tim Schmielau | 1 | 0.02% | 1 | 0.55% |
Mathias Krause | 1 | 0.02% | 1 | 0.55% |
Tony Luck | 1 | 0.02% | 1 | 0.55% |
Jeff Garzik | 1 | 0.02% | 1 | 0.55% |
Total | 5676 | 181 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * processor_idle - idle state submodule to the ACPI processor driver * * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> * Copyright (C) 2004, 2005 Dominik Brodowski <linux@brodo.de> * Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> * - Added processor hotplug support * Copyright (C) 2005 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> * - Added support for C3 on SMP */ #define pr_fmt(fmt) "ACPI: " fmt #include <linux/module.h> #include <linux/acpi.h> #include <linux/dmi.h> #include <linux/sched.h> /* need_resched() */ #include <linux/sort.h> #include <linux/tick.h> #include <linux/cpuidle.h> #include <linux/cpu.h> #include <linux/minmax.h> #include <linux/perf_event.h> #include <acpi/processor.h> #include <linux/context_tracking.h> /* * Include the apic definitions for x86 to have the APIC timer related defines * available also for UP (on SMP it gets magically included via linux/smp.h). * asm/acpi.h is not an option, as it would require more include magic. Also * creating an empty asm-ia64/apic.h would just trade pest vs. cholera. */ #ifdef CONFIG_X86 #include <asm/apic.h> #include <asm/cpu.h> #endif #define ACPI_IDLE_STATE_START (IS_ENABLED(CONFIG_ARCH_HAS_CPU_RELAX) ? 1 : 0) static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER; module_param(max_cstate, uint, 0400); static bool nocst __read_mostly; module_param(nocst, bool, 0400); static bool bm_check_disable __read_mostly; module_param(bm_check_disable, bool, 0400); static unsigned int latency_factor __read_mostly = 2; module_param(latency_factor, uint, 0644); static DEFINE_PER_CPU(struct cpuidle_device *, acpi_cpuidle_device); struct cpuidle_driver acpi_idle_driver = { .name = "acpi_idle", .owner = THIS_MODULE, }; #ifdef CONFIG_ACPI_PROCESSOR_CSTATE static DEFINE_PER_CPU(struct acpi_processor_cx * [CPUIDLE_STATE_MAX], acpi_cstate); static int disabled_by_idle_boot_param(void) { return boot_option_idle_override == IDLE_POLL || boot_option_idle_override == IDLE_HALT; } /* * IBM ThinkPad R40e crashes mysteriously when going into C2 or C3. * For now disable this. Probably a bug somewhere else. * * To skip this limit, boot/load with a large max_cstate limit. */ static int set_max_cstate(const struct dmi_system_id *id) { if (max_cstate > ACPI_PROCESSOR_MAX_POWER) return 0; pr_notice("%s detected - limiting to C%ld max_cstate." " Override with \"processor.max_cstate=%d\"\n", id->ident, (long)id->driver_data, ACPI_PROCESSOR_MAX_POWER + 1); max_cstate = (long)id->driver_data; return 0; } static const struct dmi_system_id processor_power_dmi_table[] = { { set_max_cstate, "Clevo 5600D", { DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"), DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307")}, (void *)2}, { set_max_cstate, "Pavilion zv5000", { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME,"Pavilion zv5000 (DS502A#ABA)")}, (void *)1}, { set_max_cstate, "Asus L8400B", { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), DMI_MATCH(DMI_PRODUCT_NAME,"L8400B series Notebook PC")}, (void *)1}, {}, }; /* * Callers should disable interrupts before the call and enable * interrupts after return. */ static void __cpuidle acpi_safe_halt(void) { if (!tif_need_resched()) { raw_safe_halt(); raw_local_irq_disable(); } } #ifdef ARCH_APICTIMER_STOPS_ON_C3 /* * Some BIOS implementations switch to C3 in the published C2 state. * This seems to be a common problem on AMD boxen, but other vendors * are affected too. We pick the most conservative approach: we assume * that the local APIC stops in both C2 and C3. */ static void lapic_timer_check_state(int state, struct acpi_processor *pr, struct acpi_processor_cx *cx) { struct acpi_processor_power *pwr = &pr->power; u8 type = local_apic_timer_c2_ok ? ACPI_STATE_C3 : ACPI_STATE_C2; if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT)) return; if (boot_cpu_has_bug(X86_BUG_AMD_APIC_C1E)) type = ACPI_STATE_C1; /* * Check, if one of the previous states already marked the lapic * unstable */ if (pwr->timer_broadcast_on_state < state) return; if (cx->type >= type) pr->power.timer_broadcast_on_state = state; } static void __lapic_timer_propagate_broadcast(void *arg) { struct acpi_processor *pr = arg; if (pr->power.timer_broadcast_on_state < INT_MAX) tick_broadcast_enable(); else tick_broadcast_disable(); } static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) { smp_call_function_single(pr->id, __lapic_timer_propagate_broadcast, (void *)pr, 1); } /* Power(C) State timer broadcast control */ static bool lapic_timer_needs_broadcast(struct acpi_processor *pr, struct acpi_processor_cx *cx) { return cx - pr->power.states >= pr->power.timer_broadcast_on_state; } #else static void lapic_timer_check_state(int state, struct acpi_processor *pr, struct acpi_processor_cx *cstate) { } static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) { } static bool lapic_timer_needs_broadcast(struct acpi_processor *pr, struct acpi_processor_cx *cx) { return false; } #endif #if defined(CONFIG_X86) static void tsc_check_state(int state) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_HYGON: case X86_VENDOR_AMD: case X86_VENDOR_INTEL: case X86_VENDOR_CENTAUR: case X86_VENDOR_ZHAOXIN: /* * AMD Fam10h TSC will tick in all * C/P/S0/S1 states when this bit is set. */ if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC)) return; fallthrough; default: /* TSC could halt in idle, so notify users */ if (state > ACPI_STATE_C1) mark_tsc_unstable("TSC halts in idle"); } } #else static void tsc_check_state(int state) { return; } #endif static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) { if (!pr->pblk) return -ENODEV; /* if info is obtained from pblk/fadt, type equals state */ pr->power.states[ACPI_STATE_C2].type = ACPI_STATE_C2; pr->power.states[ACPI_STATE_C3].type = ACPI_STATE_C3; #ifndef CONFIG_HOTPLUG_CPU /* * Check for P_LVL2_UP flag before entering C2 and above on * an SMP system. */ if ((num_online_cpus() > 1) && !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED)) return -ENODEV; #endif /* determine C2 and C3 address from pblk */ pr->power.states[ACPI_STATE_C2].address = pr->pblk + 4; pr->power.states[ACPI_STATE_C3].address = pr->pblk + 5; /* determine latencies from FADT */ pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.c2_latency; pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.c3_latency; /* * FADT specified C2 latency must be less than or equal to * 100 microseconds. */ if (acpi_gbl_FADT.c2_latency > ACPI_PROCESSOR_MAX_C2_LATENCY) { acpi_handle_debug(pr->handle, "C2 latency too large [%d]\n", acpi_gbl_FADT.c2_latency); /* invalidate C2 */ pr->power.states[ACPI_STATE_C2].address = 0; } /* * FADT supplied C3 latency must be less than or equal to * 1000 microseconds. */ if (acpi_gbl_FADT.c3_latency > ACPI_PROCESSOR_MAX_C3_LATENCY) { acpi_handle_debug(pr->handle, "C3 latency too large [%d]\n", acpi_gbl_FADT.c3_latency); /* invalidate C3 */ pr->power.states[ACPI_STATE_C3].address = 0; } acpi_handle_debug(pr->handle, "lvl2[0x%08x] lvl3[0x%08x]\n", pr->power.states[ACPI_STATE_C2].address, pr->power.states[ACPI_STATE_C3].address); snprintf(pr->power.states[ACPI_STATE_C2].desc, ACPI_CX_DESC_LEN, "ACPI P_LVL2 IOPORT 0x%x", pr->power.states[ACPI_STATE_C2].address); snprintf(pr->power.states[ACPI_STATE_C3].desc, ACPI_CX_DESC_LEN, "ACPI P_LVL3 IOPORT 0x%x", pr->power.states[ACPI_STATE_C3].address); return 0; } static int acpi_processor_get_power_info_default(struct acpi_processor *pr) { if (!pr->power.states[ACPI_STATE_C1].valid) { /* set the first C-State to C1 */ /* all processors need to support C1 */ pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1; pr->power.states[ACPI_STATE_C1].valid = 1; pr->power.states[ACPI_STATE_C1].entry_method = ACPI_CSTATE_HALT; snprintf(pr->power.states[ACPI_STATE_C1].desc, ACPI_CX_DESC_LEN, "ACPI HLT"); } /* the C0 state only exists as a filler in our array */ pr->power.states[ACPI_STATE_C0].valid = 1; return 0; } static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) { int ret; if (nocst) return -ENODEV; ret = acpi_processor_evaluate_cst(pr->handle, pr->id, &pr->power); if (ret) return ret; if (!pr->power.count) return -EFAULT; pr->flags.has_cst = 1; return 0; } static void acpi_processor_power_verify_c3(struct acpi_processor *pr, struct acpi_processor_cx *cx) { static int bm_check_flag = -1; static int bm_control_flag = -1; if (!cx->address) return; /* * PIIX4 Erratum #18: We don't support C3 when Type-F (fast) * DMA transfers are used by any ISA device to avoid livelock. * Note that we could disable Type-F DMA (as recommended by * the erratum), but this is known to disrupt certain ISA * devices thus we take the conservative approach. */ if (errata.piix4.fdma) { acpi_handle_debug(pr->handle, "C3 not supported on PIIX4 with Type-F DMA\n"); return; } /* All the logic here assumes flags.bm_check is same across all CPUs */ if (bm_check_flag == -1) { /* Determine whether bm_check is needed based on CPU */ acpi_processor_power_init_bm_check(&(pr->flags), pr->id); bm_check_flag = pr->flags.bm_check; bm_control_flag = pr->flags.bm_control; } else { pr->flags.bm_check = bm_check_flag; pr->flags.bm_control = bm_control_flag; } if (pr->flags.bm_check) { if (!pr->flags.bm_control) { if (pr->flags.has_cst != 1) { /* bus mastering control is necessary */ acpi_handle_debug(pr->handle, "C3 support requires BM control\n"); return; } else { /* Here we enter C3 without bus mastering */ acpi_handle_debug(pr->handle, "C3 support without BM control\n"); } } } else { /* * WBINVD should be set in fadt, for C3 state to be * supported on when bm_check is not required. */ if (!(acpi_gbl_FADT.flags & ACPI_FADT_WBINVD)) { acpi_handle_debug(pr->handle, "Cache invalidation should work properly" " for C3 to be enabled on SMP systems\n"); return; } } /* * Otherwise we've met all of our C3 requirements. * Normalize the C3 latency to expidite policy. Enable * checking of bus mastering status (bm_check) so we can * use this in our C3 policy */ cx->valid = 1; /* * On older chipsets, BM_RLD needs to be set * in order for Bus Master activity to wake the * system from C3. Newer chipsets handle DMA * during C3 automatically and BM_RLD is a NOP. * In either case, the proper way to * handle BM_RLD is to set it and leave it set. */ acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, 1); } static int acpi_cst_latency_cmp(const void *a, const void *b) { const struct acpi_processor_cx *x = a, *y = b; if (!(x->valid && y->valid)) return 0; if (x->latency > y->latency) return 1; if (x->latency < y->latency) return -1; return 0; } static void acpi_cst_latency_swap(void *a, void *b, int n) { struct acpi_processor_cx *x = a, *y = b; if (!(x->valid && y->valid)) return; swap(x->latency, y->latency); } static int acpi_processor_power_verify(struct acpi_processor *pr) { unsigned int i; unsigned int working = 0; unsigned int last_latency = 0; unsigned int last_type = 0; bool buggy_latency = false; pr->power.timer_broadcast_on_state = INT_MAX; for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) { struct acpi_processor_cx *cx = &pr->power.states[i]; switch (cx->type) { case ACPI_STATE_C1: cx->valid = 1; break; case ACPI_STATE_C2: if (!cx->address) break; cx->valid = 1; break; case ACPI_STATE_C3: acpi_processor_power_verify_c3(pr, cx); break; } if (!cx->valid) continue; if (cx->type >= last_type && cx->latency < last_latency) buggy_latency = true; last_latency = cx->latency; last_type = cx->type; lapic_timer_check_state(i, pr, cx); tsc_check_state(cx->type); working++; } if (buggy_latency) { pr_notice("FW issue: working around C-state latencies out of order\n"); sort(&pr->power.states[1], max_cstate, sizeof(struct acpi_processor_cx), acpi_cst_latency_cmp, acpi_cst_latency_swap); } lapic_timer_propagate_broadcast(pr); return working; } static int acpi_processor_get_cstate_info(struct acpi_processor *pr) { unsigned int i; int result; /* NOTE: the idle thread may not be running while calling * this function */ /* Zero initialize all the C-states info. */ memset(pr->power.states, 0, sizeof(pr->power.states)); result = acpi_processor_get_power_info_cst(pr); if (result == -ENODEV) result = acpi_processor_get_power_info_fadt(pr); if (result) return result; acpi_processor_get_power_info_default(pr); pr->power.count = acpi_processor_power_verify(pr); /* * if one state of type C2 or C3 is available, mark this * CPU as being "idle manageable" */ for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) { if (pr->power.states[i].valid) { pr->power.count = i; pr->flags.power = 1; } } return 0; } /** * acpi_idle_bm_check - checks if bus master activity was detected */ static int acpi_idle_bm_check(void) { u32 bm_status = 0; if (bm_check_disable) return 0; acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status); if (bm_status) acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, 1); /* * PIIX4 Erratum #18: Note that BM_STS doesn't always reflect * the true state of bus mastering activity; forcing us to * manually check the BMIDEA bit of each IDE channel. */ else if (errata.piix4.bmisx) { if ((inb_p(errata.piix4.bmisx + 0x02) & 0x01) || (inb_p(errata.piix4.bmisx + 0x0A) & 0x01)) bm_status = 1; } return bm_status; } static __cpuidle void io_idle(unsigned long addr) { /* IO port based C-state */ inb(addr); #ifdef CONFIG_X86 /* No delay is needed if we are in guest */ if (boot_cpu_has(X86_FEATURE_HYPERVISOR)) return; /* * Modern (>=Nehalem) Intel systems use ACPI via intel_idle, * not this code. Assume that any Intel systems using this * are ancient and may need the dummy wait. This also assumes * that the motivating chipset issue was Intel-only. */ if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) return; #endif /* * Dummy wait op - must do something useless after P_LVL2 read * because chipsets cannot guarantee that STPCLK# signal gets * asserted in time to freeze execution properly * * This workaround has been in place since the original ACPI * implementation was merged, circa 2002. * * If a profile is pointing to this instruction, please first * consider moving your system to a more modern idle * mechanism. */ inl(acpi_gbl_FADT.xpm_timer_block.address); } /** * acpi_idle_do_entry - enter idle state using the appropriate method * @cx: cstate data * * Caller disables interrupt before call and enables interrupt after return. */ static void __cpuidle acpi_idle_do_entry(struct acpi_processor_cx *cx) { perf_lopwr_cb(true); if (cx->entry_method == ACPI_CSTATE_FFH) { /* Call into architectural FFH based C-state */ acpi_processor_ffh_cstate_enter(cx); } else if (cx->entry_method == ACPI_CSTATE_HALT) { acpi_safe_halt(); } else { io_idle(cx->address); } perf_lopwr_cb(false); } /** * acpi_idle_play_dead - enters an ACPI state for long-term idle (i.e. off-lining) * @dev: the target CPU * @index: the index of suggested state */ static int acpi_idle_play_dead(struct cpuidle_device *dev, int index) { struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu); ACPI_FLUSH_CPU_CACHE(); while (1) { if (cx->entry_method == ACPI_CSTATE_HALT) safe_halt(); else if (cx->entry_method == ACPI_CSTATE_SYSTEMIO) { io_idle(cx->address); } else return -ENODEV; #if defined(CONFIG_X86) && defined(CONFIG_HOTPLUG_CPU) cond_wakeup_cpu0(); #endif } /* Never reached */ return 0; } static __always_inline bool acpi_idle_fallback_to_c1(struct acpi_processor *pr) { return IS_ENABLED(CONFIG_HOTPLUG_CPU) && !pr->flags.has_cst && !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED); } static int c3_cpu_count; static DEFINE_RAW_SPINLOCK(c3_lock); /** * acpi_idle_enter_bm - enters C3 with proper BM handling * @drv: cpuidle driver * @pr: Target processor * @cx: Target state context * @index: index of target state */ static int __cpuidle acpi_idle_enter_bm(struct cpuidle_driver *drv, struct acpi_processor *pr, struct acpi_processor_cx *cx, int index) { static struct acpi_processor_cx safe_cx = { .entry_method = ACPI_CSTATE_HALT, }; /* * disable bus master * bm_check implies we need ARB_DIS * bm_control implies whether we can do ARB_DIS * * That leaves a case where bm_check is set and bm_control is not set. * In that case we cannot do much, we enter C3 without doing anything. */ bool dis_bm = pr->flags.bm_control; instrumentation_begin(); /* If we can skip BM, demote to a safe state. */ if (!cx->bm_sts_skip && acpi_idle_bm_check()) { dis_bm = false; index = drv->safe_state_index; if (index >= 0) { cx = this_cpu_read(acpi_cstate[index]); } else { cx = &safe_cx; index = -EBUSY; } } if (dis_bm) { raw_spin_lock(&c3_lock); c3_cpu_count++; /* Disable bus master arbitration when all CPUs are in C3 */ if (c3_cpu_count == num_online_cpus()) acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1); raw_spin_unlock(&c3_lock); } ct_cpuidle_enter(); acpi_idle_do_entry(cx); ct_cpuidle_exit(); /* Re-enable bus master arbitration */ if (dis_bm) { raw_spin_lock(&c3_lock); acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0); c3_cpu_count--; raw_spin_unlock(&c3_lock); } instrumentation_end(); return index; } static int __cpuidle acpi_idle_enter(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu); struct acpi_processor *pr; pr = __this_cpu_read(processors); if (unlikely(!pr)) return -EINVAL; if (cx->type != ACPI_STATE_C1) { if (cx->type == ACPI_STATE_C3 && pr->flags.bm_check) return acpi_idle_enter_bm(drv, pr, cx, index); /* C2 to C1 demotion. */ if (acpi_idle_fallback_to_c1(pr) && num_online_cpus() > 1) { index = ACPI_IDLE_STATE_START; cx = per_cpu(acpi_cstate[index], dev->cpu); } } if (cx->type == ACPI_STATE_C3) ACPI_FLUSH_CPU_CACHE(); acpi_idle_do_entry(cx); return index; } static int __cpuidle acpi_idle_enter_s2idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu); if (cx->type == ACPI_STATE_C3) { struct acpi_processor *pr = __this_cpu_read(processors); if (unlikely(!pr)) return 0; if (pr->flags.bm_check) { u8 bm_sts_skip = cx->bm_sts_skip; /* Don't check BM_STS, do an unconditional ARB_DIS for S2IDLE */ cx->bm_sts_skip = 1; acpi_idle_enter_bm(drv, pr, cx, index); cx->bm_sts_skip = bm_sts_skip; return 0; } else { ACPI_FLUSH_CPU_CACHE(); } } acpi_idle_do_entry(cx); return 0; } static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr, struct cpuidle_device *dev) { int i, count = ACPI_IDLE_STATE_START; struct acpi_processor_cx *cx; struct cpuidle_state *state; if (max_cstate == 0) max_cstate = 1; for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) { state = &acpi_idle_driver.states[count]; cx = &pr->power.states[i]; if (!cx->valid) continue; per_cpu(acpi_cstate[count], dev->cpu) = cx; if (lapic_timer_needs_broadcast(pr, cx)) state->flags |= CPUIDLE_FLAG_TIMER_STOP; if (cx->type == ACPI_STATE_C3) { state->flags |= CPUIDLE_FLAG_TLB_FLUSHED; if (pr->flags.bm_check) state->flags |= CPUIDLE_FLAG_RCU_IDLE; } count++; if (count == CPUIDLE_STATE_MAX) break; } if (!count) return -EINVAL; return 0; } static int acpi_processor_setup_cstates(struct acpi_processor *pr) { int i, count; struct acpi_processor_cx *cx; struct cpuidle_state *state; struct cpuidle_driver *drv = &acpi_idle_driver; if (max_cstate == 0) max_cstate = 1; if (IS_ENABLED(CONFIG_ARCH_HAS_CPU_RELAX)) { cpuidle_poll_state_init(drv); count = 1; } else { count = 0; } for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) { cx = &pr->power.states[i]; if (!cx->valid) continue; state = &drv->states[count]; snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i); strscpy(state->desc, cx->desc, CPUIDLE_DESC_LEN); state->exit_latency = cx->latency; state->target_residency = cx->latency * latency_factor; state->enter = acpi_idle_enter; state->flags = 0; if (cx->type == ACPI_STATE_C1 || cx->type == ACPI_STATE_C2 || cx->type == ACPI_STATE_C3) { state->enter_dead = acpi_idle_play_dead; if (cx->type != ACPI_STATE_C3) drv->safe_state_index = count; } /* * Halt-induced C1 is not good for ->enter_s2idle, because it * re-enables interrupts on exit. Moreover, C1 is generally not * particularly interesting from the suspend-to-idle angle, so * avoid C1 and the situations in which we may need to fall back * to it altogether. */ if (cx->type != ACPI_STATE_C1 && !acpi_idle_fallback_to_c1(pr)) state->enter_s2idle = acpi_idle_enter_s2idle; count++; if (count == CPUIDLE_STATE_MAX) break; } drv->state_count = count; if (!count) return -EINVAL; return 0; } static inline void acpi_processor_cstate_first_run_checks(void) { static int first_run; if (first_run) return; dmi_check_system(processor_power_dmi_table); max_cstate = acpi_processor_cstate_check(max_cstate); if (max_cstate < ACPI_C_STATES_MAX) pr_notice("processor limited to max C-state %d\n", max_cstate); first_run++; if (nocst) return; acpi_processor_claim_cst_control(); } #else static inline int disabled_by_idle_boot_param(void) { return 0; } static inline void acpi_processor_cstate_first_run_checks(void) { } static int acpi_processor_get_cstate_info(struct acpi_processor *pr) { return -ENODEV; } static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr, struct cpuidle_device *dev) { return -EINVAL; } static int acpi_processor_setup_cstates(struct acpi_processor *pr) { return -EINVAL; } #endif /* CONFIG_ACPI_PROCESSOR_CSTATE */ struct acpi_lpi_states_array { unsigned int size; unsigned int composite_states_size; struct acpi_lpi_state *entries; struct acpi_lpi_state *composite_states[ACPI_PROCESSOR_MAX_POWER]; }; static int obj_get_integer(union acpi_object *obj, u32 *value) { if (obj->type != ACPI_TYPE_INTEGER) return -EINVAL; *value = obj->integer.value; return 0; } static int acpi_processor_evaluate_lpi(acpi_handle handle, struct acpi_lpi_states_array *info) { acpi_status status; int ret = 0; int pkg_count, state_idx = 1, loop; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *lpi_data; struct acpi_lpi_state *lpi_state; status = acpi_evaluate_object(handle, "_LPI", NULL, &buffer); if (ACPI_FAILURE(status)) { acpi_handle_debug(handle, "No _LPI, giving up\n"); return -ENODEV; } lpi_data = buffer.pointer; /* There must be at least 4 elements = 3 elements + 1 package */ if (!lpi_data || lpi_data->type != ACPI_TYPE_PACKAGE || lpi_data->package.count < 4) { pr_debug("not enough elements in _LPI\n"); ret = -ENODATA; goto end; } pkg_count = lpi_data->package.elements[2].integer.value; /* Validate number of power states. */ if (pkg_count < 1 || pkg_count != lpi_data->package.count - 3) { pr_debug("count given by _LPI is not valid\n"); ret = -ENODATA; goto end; } lpi_state = kcalloc(pkg_count, sizeof(*lpi_state), GFP_KERNEL); if (!lpi_state) { ret = -ENOMEM; goto end; } info->size = pkg_count; info->entries = lpi_state; /* LPI States start at index 3 */ for (loop = 3; state_idx <= pkg_count; loop++, state_idx++, lpi_state++) { union acpi_object *element, *pkg_elem, *obj; element = &lpi_data->package.elements[loop]; if (element->type != ACPI_TYPE_PACKAGE || element->package.count < 7) continue; pkg_elem = element->package.elements; obj = pkg_elem + 6; if (obj->type == ACPI_TYPE_BUFFER) { struct acpi_power_register *reg; reg = (struct acpi_power_register *)obj->buffer.pointer; if (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO && reg->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) continue; lpi_state->address = reg->address; lpi_state->entry_method = reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE ? ACPI_CSTATE_FFH : ACPI_CSTATE_SYSTEMIO; } else if (obj->type == ACPI_TYPE_INTEGER) { lpi_state->entry_method = ACPI_CSTATE_INTEGER; lpi_state->address = obj->integer.value; } else { continue; } /* elements[7,8] skipped for now i.e. Residency/Usage counter*/ obj = pkg_elem + 9; if (obj->type == ACPI_TYPE_STRING) strscpy(lpi_state->desc, obj->string.pointer, ACPI_CX_DESC_LEN); lpi_state->index = state_idx; if (obj_get_integer(pkg_elem + 0, &lpi_state->min_residency)) { pr_debug("No min. residency found, assuming 10 us\n"); lpi_state->min_residency = 10; } if (obj_get_integer(pkg_elem + 1, &lpi_state->wake_latency)) { pr_debug("No wakeup residency found, assuming 10 us\n"); lpi_state->wake_latency = 10; } if (obj_get_integer(pkg_elem + 2, &lpi_state->flags)) lpi_state->flags = 0; if (obj_get_integer(pkg_elem + 3, &lpi_state->arch_flags)) lpi_state->arch_flags = 0; if (obj_get_integer(pkg_elem + 4, &lpi_state->res_cnt_freq)) lpi_state->res_cnt_freq = 1; if (obj_get_integer(pkg_elem + 5, &lpi_state->enable_parent_state)) lpi_state->enable_parent_state = 0; } acpi_handle_debug(handle, "Found %d power states\n", state_idx); end: kfree(buffer.pointer); return ret; } /* * flat_state_cnt - the number of composite LPI states after the process of flattening */ static int flat_state_cnt; /** * combine_lpi_states - combine local and parent LPI states to form a composite LPI state * * @local: local LPI state * @parent: parent LPI state * @result: composite LPI state */ static bool combine_lpi_states(struct acpi_lpi_state *local, struct acpi_lpi_state *parent, struct acpi_lpi_state *result) { if (parent->entry_method == ACPI_CSTATE_INTEGER) { if (!parent->address) /* 0 means autopromotable */ return false; result->address = local->address + parent->address; } else { result->address = parent->address; } result->min_residency = max(local->min_residency, parent->min_residency); result->wake_latency = local->wake_latency + parent->wake_latency; result->enable_parent_state = parent->enable_parent_state; result->entry_method = local->entry_method; result->flags = parent->flags; result->arch_flags = parent->arch_flags; result->index = parent->index; strscpy(result->desc, local->desc, ACPI_CX_DESC_LEN); strlcat(result->desc, "+", ACPI_CX_DESC_LEN); strlcat(result->desc, parent->desc, ACPI_CX_DESC_LEN); return true; } #define ACPI_LPI_STATE_FLAGS_ENABLED BIT(0) static void stash_composite_state(struct acpi_lpi_states_array *curr_level, struct acpi_lpi_state *t) { curr_level->composite_states[curr_level->composite_states_size++] = t; } static int flatten_lpi_states(struct acpi_processor *pr, struct acpi_lpi_states_array *curr_level, struct acpi_lpi_states_array *prev_level) { int i, j, state_count = curr_level->size; struct acpi_lpi_state *p, *t = curr_level->entries; curr_level->composite_states_size = 0; for (j = 0; j < state_count; j++, t++) { struct acpi_lpi_state *flpi; if (!(t->flags & ACPI_LPI_STATE_FLAGS_ENABLED)) continue; if (flat_state_cnt >= ACPI_PROCESSOR_MAX_POWER) { pr_warn("Limiting number of LPI states to max (%d)\n", ACPI_PROCESSOR_MAX_POWER); pr_warn("Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n"); break; } flpi = &pr->power.lpi_states[flat_state_cnt]; if (!prev_level) { /* leaf/processor node */ memcpy(flpi, t, sizeof(*t)); stash_composite_state(curr_level, flpi); flat_state_cnt++; continue; } for (i = 0; i < prev_level->composite_states_size; i++) { p = prev_level->composite_states[i]; if (t->index <= p->enable_parent_state && combine_lpi_states(p, t, flpi)) { stash_composite_state(curr_level, flpi); flat_state_cnt++; flpi++; } } } kfree(curr_level->entries); return 0; } int __weak acpi_processor_ffh_lpi_probe(unsigned int cpu) { return -EOPNOTSUPP; } static int acpi_processor_get_lpi_info(struct acpi_processor *pr) { int ret, i; acpi_status status; acpi_handle handle = pr->handle, pr_ahandle; struct acpi_device *d = NULL; struct acpi_lpi_states_array info[2], *tmp, *prev, *curr; /* make sure our architecture has support */ ret = acpi_processor_ffh_lpi_probe(pr->id); if (ret == -EOPNOTSUPP) return ret; if (!osc_pc_lpi_support_confirmed) return -EOPNOTSUPP; if (!acpi_has_method(handle, "_LPI")) return -EINVAL; flat_state_cnt = 0; prev = &info[0]; curr = &info[1]; handle = pr->handle; ret = acpi_processor_evaluate_lpi(handle, prev); if (ret) return ret; flatten_lpi_states(pr, prev, NULL); status = acpi_get_parent(handle, &pr_ahandle); while (ACPI_SUCCESS(status)) { d = acpi_fetch_acpi_dev(pr_ahandle); if (!d) break; handle = pr_ahandle; if (strcmp(acpi_device_hid(d), ACPI_PROCESSOR_CONTAINER_HID)) break; /* can be optional ? */ if (!acpi_has_method(handle, "_LPI")) break; ret = acpi_processor_evaluate_lpi(handle, curr); if (ret) break; /* flatten all the LPI states in this level of hierarchy */ flatten_lpi_states(pr, curr, prev); tmp = prev, prev = curr, curr = tmp; status = acpi_get_parent(handle, &pr_ahandle); } pr->power.count = flat_state_cnt; /* reset the index after flattening */ for (i = 0; i < pr->power.count; i++) pr->power.lpi_states[i].index = i; /* Tell driver that _LPI is supported. */ pr->flags.has_lpi = 1; pr->flags.power = 1; return 0; } int __weak acpi_processor_ffh_lpi_enter(struct acpi_lpi_state *lpi) { return -ENODEV; } /** * acpi_idle_lpi_enter - enters an ACPI any LPI state * @dev: the target CPU * @drv: cpuidle driver containing cpuidle state info * @index: index of target state * * Return: 0 for success or negative value for error */ static int acpi_idle_lpi_enter(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { struct acpi_processor *pr; struct acpi_lpi_state *lpi; pr = __this_cpu_read(processors); if (unlikely(!pr)) return -EINVAL; lpi = &pr->power.lpi_states[index]; if (lpi->entry_method == ACPI_CSTATE_FFH) return acpi_processor_ffh_lpi_enter(lpi); return -EINVAL; } static int acpi_processor_setup_lpi_states(struct acpi_processor *pr) { int i; struct acpi_lpi_state *lpi; struct cpuidle_state *state; struct cpuidle_driver *drv = &acpi_idle_driver; if (!pr->flags.has_lpi) return -EOPNOTSUPP; for (i = 0; i < pr->power.count && i < CPUIDLE_STATE_MAX; i++) { lpi = &pr->power.lpi_states[i]; state = &drv->states[i]; snprintf(state->name, CPUIDLE_NAME_LEN, "LPI-%d", i); strscpy(state->desc, lpi->desc, CPUIDLE_DESC_LEN); state->exit_latency = lpi->wake_latency; state->target_residency = lpi->min_residency; if (lpi->arch_flags) state->flags |= CPUIDLE_FLAG_TIMER_STOP; if (i != 0 && lpi->entry_method == ACPI_CSTATE_FFH) state->flags |= CPUIDLE_FLAG_RCU_IDLE; state->enter = acpi_idle_lpi_enter; drv->safe_state_index = i; } drv->state_count = i; return 0; } /** * acpi_processor_setup_cpuidle_states- prepares and configures cpuidle * global state data i.e. idle routines * * @pr: the ACPI processor */ static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr) { int i; struct cpuidle_driver *drv = &acpi_idle_driver; if (!pr->flags.power_setup_done || !pr->flags.power) return -EINVAL; drv->safe_state_index = -1; for (i = ACPI_IDLE_STATE_START; i < CPUIDLE_STATE_MAX; i++) { drv->states[i].name[0] = '\0'; drv->states[i].desc[0] = '\0'; } if (pr->flags.has_lpi) return acpi_processor_setup_lpi_states(pr); return acpi_processor_setup_cstates(pr); } /** * acpi_processor_setup_cpuidle_dev - prepares and configures CPUIDLE * device i.e. per-cpu data * * @pr: the ACPI processor * @dev : the cpuidle device */ static int acpi_processor_setup_cpuidle_dev(struct acpi_processor *pr, struct cpuidle_device *dev) { if (!pr->flags.power_setup_done || !pr->flags.power || !dev) return -EINVAL; dev->cpu = pr->id; if (pr->flags.has_lpi) return acpi_processor_ffh_lpi_probe(pr->id); return acpi_processor_setup_cpuidle_cx(pr, dev); } static int acpi_processor_get_power_info(struct acpi_processor *pr) { int ret; ret = acpi_processor_get_lpi_info(pr); if (ret) ret = acpi_processor_get_cstate_info(pr); return ret; } int acpi_processor_hotplug(struct acpi_processor *pr) { int ret = 0; struct cpuidle_device *dev; if (disabled_by_idle_boot_param()) return 0; if (!pr->flags.power_setup_done) return -ENODEV; dev = per_cpu(acpi_cpuidle_device, pr->id); cpuidle_pause_and_lock(); cpuidle_disable_device(dev); ret = acpi_processor_get_power_info(pr); if (!ret && pr->flags.power) { acpi_processor_setup_cpuidle_dev(pr, dev); ret = cpuidle_enable_device(dev); } cpuidle_resume_and_unlock(); return ret; } int acpi_processor_power_state_has_changed(struct acpi_processor *pr) { int cpu; struct acpi_processor *_pr; struct cpuidle_device *dev; if (disabled_by_idle_boot_param()) return 0; if (!pr->flags.power_setup_done) return -ENODEV; /* * FIXME: Design the ACPI notification to make it once per * system instead of once per-cpu. This condition is a hack * to make the code that updates C-States be called once. */ if (pr->id == 0 && cpuidle_get_driver() == &acpi_idle_driver) { /* Protect against cpu-hotplug */ cpus_read_lock(); cpuidle_pause_and_lock(); /* Disable all cpuidle devices */ for_each_online_cpu(cpu) { _pr = per_cpu(processors, cpu); if (!_pr || !_pr->flags.power_setup_done) continue; dev = per_cpu(acpi_cpuidle_device, cpu); cpuidle_disable_device(dev); } /* Populate Updated C-state information */ acpi_processor_get_power_info(pr); acpi_processor_setup_cpuidle_states(pr); /* Enable all cpuidle devices */ for_each_online_cpu(cpu) { _pr = per_cpu(processors, cpu); if (!_pr || !_pr->flags.power_setup_done) continue; acpi_processor_get_power_info(_pr); if (_pr->flags.power) { dev = per_cpu(acpi_cpuidle_device, cpu); acpi_processor_setup_cpuidle_dev(_pr, dev); cpuidle_enable_device(dev); } } cpuidle_resume_and_unlock(); cpus_read_unlock(); } return 0; } static int acpi_processor_registered; int acpi_processor_power_init(struct acpi_processor *pr) { int retval; struct cpuidle_device *dev; if (disabled_by_idle_boot_param()) return 0; acpi_processor_cstate_first_run_checks(); if (!acpi_processor_get_power_info(pr)) pr->flags.power_setup_done = 1; /* * Install the idle handler if processor power management is supported. * Note that we use previously set idle handler will be used on * platforms that only support C1. */ if (pr->flags.power) { /* Register acpi_idle_driver if not already registered */ if (!acpi_processor_registered) { acpi_processor_setup_cpuidle_states(pr); retval = cpuidle_register_driver(&acpi_idle_driver); if (retval) return retval; pr_debug("%s registered with cpuidle\n", acpi_idle_driver.name); } dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) return -ENOMEM; per_cpu(acpi_cpuidle_device, pr->id) = dev; acpi_processor_setup_cpuidle_dev(pr, dev); /* Register per-cpu cpuidle_device. Cpuidle driver * must already be registered before registering device */ retval = cpuidle_register_device(dev); if (retval) { if (acpi_processor_registered == 0) cpuidle_unregister_driver(&acpi_idle_driver); return retval; } acpi_processor_registered++; } return 0; } int acpi_processor_power_exit(struct acpi_processor *pr) { struct cpuidle_device *dev = per_cpu(acpi_cpuidle_device, pr->id); if (disabled_by_idle_boot_param()) return 0; if (pr->flags.power) { cpuidle_unregister_device(dev); acpi_processor_registered--; if (acpi_processor_registered == 0) cpuidle_unregister_driver(&acpi_idle_driver); } pr->flags.power_setup_done = 0; return 0; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1