Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Jarkko Sakkinen | 1499 | 40.86% | 17 | 30.91% |
Tomas Winkler | 500 | 13.63% | 10 | 18.18% |
Jason Gunthorpe | 416 | 11.34% | 5 | 9.09% |
Ivan Lazeev | 416 | 11.34% | 1 | 1.82% |
Jiandi An | 368 | 10.03% | 3 | 5.45% |
Matthew Garrett | 283 | 7.71% | 1 | 1.82% |
Kylene Jo Hall | 54 | 1.47% | 4 | 7.27% |
Hanjun Guo | 50 | 1.36% | 1 | 1.82% |
Christophe Ricard | 35 | 0.95% | 1 | 1.82% |
Andy Shevchenko | 20 | 0.55% | 1 | 1.82% |
Gang Wei | 6 | 0.16% | 1 | 1.82% |
Leendert van Doorn | 5 | 0.14% | 1 | 1.82% |
Manuel Lauss | 5 | 0.14% | 1 | 1.82% |
Gerard Snitselaar | 3 | 0.08% | 1 | 1.82% |
Robert Moore | 2 | 0.05% | 1 | 1.82% |
Thomas Gleixner | 2 | 0.05% | 1 | 1.82% |
Rajiv Andrade | 1 | 0.03% | 1 | 1.82% |
Tian Tao | 1 | 0.03% | 1 | 1.82% |
Dawei Li | 1 | 0.03% | 1 | 1.82% |
Michael Kelley | 1 | 0.03% | 1 | 1.82% |
Arvind Yadav | 1 | 0.03% | 1 | 1.82% |
Total | 3669 | 55 |
// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Intel Corporation * * Authors: * Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> * * Maintained by: <tpmdd-devel@lists.sourceforge.net> * * This device driver implements the TPM interface as defined in * the TCG CRB 2.0 TPM specification. */ #include <linux/acpi.h> #include <linux/highmem.h> #include <linux/rculist.h> #include <linux/module.h> #include <linux/pm_runtime.h> #ifdef CONFIG_ARM64 #include <linux/arm-smccc.h> #endif #include "tpm.h" #define ACPI_SIG_TPM2 "TPM2" #define TPM_CRB_MAX_RESOURCES 3 static const guid_t crb_acpi_start_guid = GUID_INIT(0x6BBF6CAB, 0x5463, 0x4714, 0xB7, 0xCD, 0xF0, 0x20, 0x3C, 0x03, 0x68, 0xD4); enum crb_defaults { CRB_ACPI_START_REVISION_ID = 1, CRB_ACPI_START_INDEX = 1, }; enum crb_loc_ctrl { CRB_LOC_CTRL_REQUEST_ACCESS = BIT(0), CRB_LOC_CTRL_RELINQUISH = BIT(1), }; enum crb_loc_state { CRB_LOC_STATE_LOC_ASSIGNED = BIT(1), CRB_LOC_STATE_TPM_REG_VALID_STS = BIT(7), }; enum crb_ctrl_req { CRB_CTRL_REQ_CMD_READY = BIT(0), CRB_CTRL_REQ_GO_IDLE = BIT(1), }; enum crb_ctrl_sts { CRB_CTRL_STS_ERROR = BIT(0), CRB_CTRL_STS_TPM_IDLE = BIT(1), }; enum crb_start { CRB_START_INVOKE = BIT(0), }; enum crb_cancel { CRB_CANCEL_INVOKE = BIT(0), }; struct crb_regs_head { u32 loc_state; u32 reserved1; u32 loc_ctrl; u32 loc_sts; u8 reserved2[32]; u64 intf_id; u64 ctrl_ext; } __packed; struct crb_regs_tail { u32 ctrl_req; u32 ctrl_sts; u32 ctrl_cancel; u32 ctrl_start; u32 ctrl_int_enable; u32 ctrl_int_sts; u32 ctrl_cmd_size; u32 ctrl_cmd_pa_low; u32 ctrl_cmd_pa_high; u32 ctrl_rsp_size; u64 ctrl_rsp_pa; } __packed; enum crb_status { CRB_DRV_STS_COMPLETE = BIT(0), }; struct crb_priv { u32 sm; const char *hid; struct crb_regs_head __iomem *regs_h; struct crb_regs_tail __iomem *regs_t; u8 __iomem *cmd; u8 __iomem *rsp; u32 cmd_size; u32 smc_func_id; u32 __iomem *pluton_start_addr; u32 __iomem *pluton_reply_addr; }; struct tpm2_crb_smc { u32 interrupt; u8 interrupt_flags; u8 op_flags; u16 reserved2; u32 smc_func_id; }; struct tpm2_crb_pluton { u64 start_addr; u64 reply_addr; }; static bool crb_wait_for_reg_32(u32 __iomem *reg, u32 mask, u32 value, unsigned long timeout) { ktime_t start; ktime_t stop; start = ktime_get(); stop = ktime_add(start, ms_to_ktime(timeout)); do { if ((ioread32(reg) & mask) == value) return true; usleep_range(50, 100); } while (ktime_before(ktime_get(), stop)); return ((ioread32(reg) & mask) == value); } static int crb_try_pluton_doorbell(struct crb_priv *priv, bool wait_for_complete) { if (priv->sm != ACPI_TPM2_COMMAND_BUFFER_WITH_PLUTON) return 0; if (!crb_wait_for_reg_32(priv->pluton_reply_addr, ~0, 1, TPM2_TIMEOUT_C)) return -ETIME; iowrite32(1, priv->pluton_start_addr); if (wait_for_complete == false) return 0; if (!crb_wait_for_reg_32(priv->pluton_start_addr, 0xffffffff, 0, 200)) return -ETIME; return 0; } /** * __crb_go_idle - request tpm crb device to go the idle state * * @dev: crb device * @priv: crb private data * * Write CRB_CTRL_REQ_GO_IDLE to TPM_CRB_CTRL_REQ * The device should respond within TIMEOUT_C by clearing the bit. * Anyhow, we do not wait here as a consequent CMD_READY request * will be handled correctly even if idle was not completed. * * The function does nothing for devices with ACPI-start method * or SMC-start method. * * Return: 0 always */ static int __crb_go_idle(struct device *dev, struct crb_priv *priv) { int rc; if ((priv->sm == ACPI_TPM2_START_METHOD) || (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD) || (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC)) return 0; iowrite32(CRB_CTRL_REQ_GO_IDLE, &priv->regs_t->ctrl_req); rc = crb_try_pluton_doorbell(priv, true); if (rc) return rc; if (!crb_wait_for_reg_32(&priv->regs_t->ctrl_req, CRB_CTRL_REQ_GO_IDLE/* mask */, 0, /* value */ TPM2_TIMEOUT_C)) { dev_warn(dev, "goIdle timed out\n"); return -ETIME; } return 0; } static int crb_go_idle(struct tpm_chip *chip) { struct device *dev = &chip->dev; struct crb_priv *priv = dev_get_drvdata(dev); return __crb_go_idle(dev, priv); } /** * __crb_cmd_ready - request tpm crb device to enter ready state * * @dev: crb device * @priv: crb private data * * Write CRB_CTRL_REQ_CMD_READY to TPM_CRB_CTRL_REQ * and poll till the device acknowledge it by clearing the bit. * The device should respond within TIMEOUT_C. * * The function does nothing for devices with ACPI-start method * or SMC-start method. * * Return: 0 on success -ETIME on timeout; */ static int __crb_cmd_ready(struct device *dev, struct crb_priv *priv) { int rc; if ((priv->sm == ACPI_TPM2_START_METHOD) || (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD) || (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC)) return 0; iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->regs_t->ctrl_req); rc = crb_try_pluton_doorbell(priv, true); if (rc) return rc; if (!crb_wait_for_reg_32(&priv->regs_t->ctrl_req, CRB_CTRL_REQ_CMD_READY /* mask */, 0, /* value */ TPM2_TIMEOUT_C)) { dev_warn(dev, "cmdReady timed out\n"); return -ETIME; } return 0; } static int crb_cmd_ready(struct tpm_chip *chip) { struct device *dev = &chip->dev; struct crb_priv *priv = dev_get_drvdata(dev); return __crb_cmd_ready(dev, priv); } static int __crb_request_locality(struct device *dev, struct crb_priv *priv, int loc) { u32 value = CRB_LOC_STATE_LOC_ASSIGNED | CRB_LOC_STATE_TPM_REG_VALID_STS; if (!priv->regs_h) return 0; iowrite32(CRB_LOC_CTRL_REQUEST_ACCESS, &priv->regs_h->loc_ctrl); if (!crb_wait_for_reg_32(&priv->regs_h->loc_state, value, value, TPM2_TIMEOUT_C)) { dev_warn(dev, "TPM_LOC_STATE_x.requestAccess timed out\n"); return -ETIME; } return 0; } static int crb_request_locality(struct tpm_chip *chip, int loc) { struct crb_priv *priv = dev_get_drvdata(&chip->dev); return __crb_request_locality(&chip->dev, priv, loc); } static int __crb_relinquish_locality(struct device *dev, struct crb_priv *priv, int loc) { u32 mask = CRB_LOC_STATE_LOC_ASSIGNED | CRB_LOC_STATE_TPM_REG_VALID_STS; u32 value = CRB_LOC_STATE_TPM_REG_VALID_STS; if (!priv->regs_h) return 0; iowrite32(CRB_LOC_CTRL_RELINQUISH, &priv->regs_h->loc_ctrl); if (!crb_wait_for_reg_32(&priv->regs_h->loc_state, mask, value, TPM2_TIMEOUT_C)) { dev_warn(dev, "TPM_LOC_STATE_x.Relinquish timed out\n"); return -ETIME; } return 0; } static int crb_relinquish_locality(struct tpm_chip *chip, int loc) { struct crb_priv *priv = dev_get_drvdata(&chip->dev); return __crb_relinquish_locality(&chip->dev, priv, loc); } static u8 crb_status(struct tpm_chip *chip) { struct crb_priv *priv = dev_get_drvdata(&chip->dev); u8 sts = 0; if ((ioread32(&priv->regs_t->ctrl_start) & CRB_START_INVOKE) != CRB_START_INVOKE) sts |= CRB_DRV_STS_COMPLETE; return sts; } static int crb_recv(struct tpm_chip *chip, u8 *buf, size_t count) { struct crb_priv *priv = dev_get_drvdata(&chip->dev); unsigned int expected; /* A sanity check that the upper layer wants to get at least the header * as that is the minimum size for any TPM response. */ if (count < TPM_HEADER_SIZE) return -EIO; /* If this bit is set, according to the spec, the TPM is in * unrecoverable condition. */ if (ioread32(&priv->regs_t->ctrl_sts) & CRB_CTRL_STS_ERROR) return -EIO; /* Read the first 8 bytes in order to get the length of the response. * We read exactly a quad word in order to make sure that the remaining * reads will be aligned. */ memcpy_fromio(buf, priv->rsp, 8); expected = be32_to_cpup((__be32 *)&buf[2]); if (expected > count || expected < TPM_HEADER_SIZE) return -EIO; memcpy_fromio(&buf[8], &priv->rsp[8], expected - 8); return expected; } static int crb_do_acpi_start(struct tpm_chip *chip) { union acpi_object *obj; int rc; obj = acpi_evaluate_dsm(chip->acpi_dev_handle, &crb_acpi_start_guid, CRB_ACPI_START_REVISION_ID, CRB_ACPI_START_INDEX, NULL); if (!obj) return -ENXIO; rc = obj->integer.value == 0 ? 0 : -ENXIO; ACPI_FREE(obj); return rc; } #ifdef CONFIG_ARM64 /* * This is a TPM Command Response Buffer start method that invokes a * Secure Monitor Call to requrest the firmware to execute or cancel * a TPM 2.0 command. */ static int tpm_crb_smc_start(struct device *dev, unsigned long func_id) { struct arm_smccc_res res; arm_smccc_smc(func_id, 0, 0, 0, 0, 0, 0, 0, &res); if (res.a0 != 0) { dev_err(dev, FW_BUG "tpm_crb_smc_start() returns res.a0 = 0x%lx\n", res.a0); return -EIO; } return 0; } #else static int tpm_crb_smc_start(struct device *dev, unsigned long func_id) { dev_err(dev, FW_BUG "tpm_crb: incorrect start method\n"); return -EINVAL; } #endif static int crb_send(struct tpm_chip *chip, u8 *buf, size_t len) { struct crb_priv *priv = dev_get_drvdata(&chip->dev); int rc = 0; /* Zero the cancel register so that the next command will not get * canceled. */ iowrite32(0, &priv->regs_t->ctrl_cancel); if (len > priv->cmd_size) { dev_err(&chip->dev, "invalid command count value %zd %d\n", len, priv->cmd_size); return -E2BIG; } /* Seems to be necessary for every command */ if (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_PLUTON) __crb_cmd_ready(&chip->dev, priv); memcpy_toio(priv->cmd, buf, len); /* Make sure that cmd is populated before issuing start. */ wmb(); /* The reason for the extra quirk is that the PTT in 4th Gen Core CPUs * report only ACPI start but in practice seems to require both * CRB start, hence invoking CRB start method if hid == MSFT0101. */ if ((priv->sm == ACPI_TPM2_COMMAND_BUFFER) || (priv->sm == ACPI_TPM2_MEMORY_MAPPED) || (!strcmp(priv->hid, "MSFT0101"))) iowrite32(CRB_START_INVOKE, &priv->regs_t->ctrl_start); if ((priv->sm == ACPI_TPM2_START_METHOD) || (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD)) rc = crb_do_acpi_start(chip); if (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC) { iowrite32(CRB_START_INVOKE, &priv->regs_t->ctrl_start); rc = tpm_crb_smc_start(&chip->dev, priv->smc_func_id); } if (rc) return rc; return crb_try_pluton_doorbell(priv, false); } static void crb_cancel(struct tpm_chip *chip) { struct crb_priv *priv = dev_get_drvdata(&chip->dev); iowrite32(CRB_CANCEL_INVOKE, &priv->regs_t->ctrl_cancel); if (((priv->sm == ACPI_TPM2_START_METHOD) || (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD)) && crb_do_acpi_start(chip)) dev_err(&chip->dev, "ACPI Start failed\n"); } static bool crb_req_canceled(struct tpm_chip *chip, u8 status) { struct crb_priv *priv = dev_get_drvdata(&chip->dev); u32 cancel = ioread32(&priv->regs_t->ctrl_cancel); return (cancel & CRB_CANCEL_INVOKE) == CRB_CANCEL_INVOKE; } static const struct tpm_class_ops tpm_crb = { .flags = TPM_OPS_AUTO_STARTUP, .status = crb_status, .recv = crb_recv, .send = crb_send, .cancel = crb_cancel, .req_canceled = crb_req_canceled, .go_idle = crb_go_idle, .cmd_ready = crb_cmd_ready, .request_locality = crb_request_locality, .relinquish_locality = crb_relinquish_locality, .req_complete_mask = CRB_DRV_STS_COMPLETE, .req_complete_val = CRB_DRV_STS_COMPLETE, }; static int crb_check_resource(struct acpi_resource *ares, void *data) { struct resource *iores_array = data; struct resource_win win; struct resource *res = &(win.res); int i; if (acpi_dev_resource_memory(ares, res) || acpi_dev_resource_address_space(ares, &win)) { for (i = 0; i < TPM_CRB_MAX_RESOURCES + 1; ++i) { if (resource_type(iores_array + i) != IORESOURCE_MEM) { iores_array[i] = *res; iores_array[i].name = NULL; break; } } } return 1; } static void __iomem *crb_map_res(struct device *dev, struct resource *iores, void __iomem **iobase_ptr, u64 start, u32 size) { struct resource new_res = { .start = start, .end = start + size - 1, .flags = IORESOURCE_MEM, }; /* Detect a 64 bit address on a 32 bit system */ if (start != new_res.start) return IOMEM_ERR_PTR(-EINVAL); if (!iores) return devm_ioremap_resource(dev, &new_res); if (!*iobase_ptr) { *iobase_ptr = devm_ioremap_resource(dev, iores); if (IS_ERR(*iobase_ptr)) return *iobase_ptr; } return *iobase_ptr + (new_res.start - iores->start); } /* * Work around broken BIOSs that return inconsistent values from the ACPI * region vs the registers. Trust the ACPI region. Such broken systems * probably cannot send large TPM commands since the buffer will be truncated. */ static u64 crb_fixup_cmd_size(struct device *dev, struct resource *io_res, u64 start, u64 size) { if (io_res->start > start || io_res->end < start) return size; if (start + size - 1 <= io_res->end) return size; dev_err(dev, FW_BUG "ACPI region does not cover the entire command/response buffer. %pr vs %llx %llx\n", io_res, start, size); return io_res->end - start + 1; } static int crb_map_io(struct acpi_device *device, struct crb_priv *priv, struct acpi_table_tpm2 *buf) { struct list_head acpi_resource_list; struct resource iores_array[TPM_CRB_MAX_RESOURCES + 1] = { {0} }; void __iomem *iobase_array[TPM_CRB_MAX_RESOURCES] = {NULL}; struct device *dev = &device->dev; struct resource *iores; void __iomem **iobase_ptr; int i; u32 pa_high, pa_low; u64 cmd_pa; u32 cmd_size; __le64 __rsp_pa; u64 rsp_pa; u32 rsp_size; int ret; INIT_LIST_HEAD(&acpi_resource_list); ret = acpi_dev_get_resources(device, &acpi_resource_list, crb_check_resource, iores_array); if (ret < 0) return ret; acpi_dev_free_resource_list(&acpi_resource_list); /* Pluton doesn't appear to define ACPI memory regions */ if (priv->sm != ACPI_TPM2_COMMAND_BUFFER_WITH_PLUTON) { if (resource_type(iores_array) != IORESOURCE_MEM) { dev_err(dev, FW_BUG "TPM2 ACPI table does not define a memory resource\n"); return -EINVAL; } else if (resource_type(iores_array + TPM_CRB_MAX_RESOURCES) == IORESOURCE_MEM) { dev_warn(dev, "TPM2 ACPI table defines too many memory resources\n"); memset(iores_array + TPM_CRB_MAX_RESOURCES, 0, sizeof(*iores_array)); iores_array[TPM_CRB_MAX_RESOURCES].flags = 0; } } iores = NULL; iobase_ptr = NULL; for (i = 0; resource_type(iores_array + i) == IORESOURCE_MEM; ++i) { if (buf->control_address >= iores_array[i].start && buf->control_address + sizeof(struct crb_regs_tail) - 1 <= iores_array[i].end) { iores = iores_array + i; iobase_ptr = iobase_array + i; break; } } priv->regs_t = crb_map_res(dev, iores, iobase_ptr, buf->control_address, sizeof(struct crb_regs_tail)); if (IS_ERR(priv->regs_t)) return PTR_ERR(priv->regs_t); /* The ACPI IO region starts at the head area and continues to include * the control area, as one nice sane region except for some older * stuff that puts the control area outside the ACPI IO region. */ if ((priv->sm == ACPI_TPM2_COMMAND_BUFFER) || (priv->sm == ACPI_TPM2_MEMORY_MAPPED)) { if (iores && buf->control_address == iores->start + sizeof(*priv->regs_h)) priv->regs_h = *iobase_ptr; else dev_warn(dev, FW_BUG "Bad ACPI memory layout"); } ret = __crb_request_locality(dev, priv, 0); if (ret) return ret; /* * PTT HW bug w/a: wake up the device to access * possibly not retained registers. */ ret = __crb_cmd_ready(dev, priv); if (ret) goto out_relinquish_locality; pa_high = ioread32(&priv->regs_t->ctrl_cmd_pa_high); pa_low = ioread32(&priv->regs_t->ctrl_cmd_pa_low); cmd_pa = ((u64)pa_high << 32) | pa_low; cmd_size = ioread32(&priv->regs_t->ctrl_cmd_size); iores = NULL; iobase_ptr = NULL; for (i = 0; iores_array[i].end; ++i) { if (cmd_pa >= iores_array[i].start && cmd_pa <= iores_array[i].end) { iores = iores_array + i; iobase_ptr = iobase_array + i; break; } } if (iores) cmd_size = crb_fixup_cmd_size(dev, iores, cmd_pa, cmd_size); dev_dbg(dev, "cmd_hi = %X cmd_low = %X cmd_size %X\n", pa_high, pa_low, cmd_size); priv->cmd = crb_map_res(dev, iores, iobase_ptr, cmd_pa, cmd_size); if (IS_ERR(priv->cmd)) { ret = PTR_ERR(priv->cmd); goto out; } memcpy_fromio(&__rsp_pa, &priv->regs_t->ctrl_rsp_pa, 8); rsp_pa = le64_to_cpu(__rsp_pa); rsp_size = ioread32(&priv->regs_t->ctrl_rsp_size); iores = NULL; iobase_ptr = NULL; for (i = 0; resource_type(iores_array + i) == IORESOURCE_MEM; ++i) { if (rsp_pa >= iores_array[i].start && rsp_pa <= iores_array[i].end) { iores = iores_array + i; iobase_ptr = iobase_array + i; break; } } if (iores) rsp_size = crb_fixup_cmd_size(dev, iores, rsp_pa, rsp_size); if (cmd_pa != rsp_pa) { priv->rsp = crb_map_res(dev, iores, iobase_ptr, rsp_pa, rsp_size); ret = PTR_ERR_OR_ZERO(priv->rsp); goto out; } /* According to the PTP specification, overlapping command and response * buffer sizes must be identical. */ if (cmd_size != rsp_size) { dev_err(dev, FW_BUG "overlapping command and response buffer sizes are not identical"); ret = -EINVAL; goto out; } priv->rsp = priv->cmd; out: if (!ret) priv->cmd_size = cmd_size; __crb_go_idle(dev, priv); out_relinquish_locality: __crb_relinquish_locality(dev, priv, 0); return ret; } static int crb_map_pluton(struct device *dev, struct crb_priv *priv, struct acpi_table_tpm2 *buf, struct tpm2_crb_pluton *crb_pluton) { priv->pluton_start_addr = crb_map_res(dev, NULL, NULL, crb_pluton->start_addr, 4); if (IS_ERR(priv->pluton_start_addr)) return PTR_ERR(priv->pluton_start_addr); priv->pluton_reply_addr = crb_map_res(dev, NULL, NULL, crb_pluton->reply_addr, 4); if (IS_ERR(priv->pluton_reply_addr)) return PTR_ERR(priv->pluton_reply_addr); return 0; } static int crb_acpi_add(struct acpi_device *device) { struct acpi_table_tpm2 *buf; struct crb_priv *priv; struct tpm_chip *chip; struct device *dev = &device->dev; struct tpm2_crb_smc *crb_smc; struct tpm2_crb_pluton *crb_pluton; acpi_status status; u32 sm; int rc; status = acpi_get_table(ACPI_SIG_TPM2, 1, (struct acpi_table_header **) &buf); if (ACPI_FAILURE(status) || buf->header.length < sizeof(*buf)) { dev_err(dev, FW_BUG "failed to get TPM2 ACPI table\n"); return -EINVAL; } /* Should the FIFO driver handle this? */ sm = buf->start_method; if (sm == ACPI_TPM2_MEMORY_MAPPED) { rc = -ENODEV; goto out; } priv = devm_kzalloc(dev, sizeof(struct crb_priv), GFP_KERNEL); if (!priv) { rc = -ENOMEM; goto out; } if (sm == ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC) { if (buf->header.length < (sizeof(*buf) + sizeof(*crb_smc))) { dev_err(dev, FW_BUG "TPM2 ACPI table has wrong size %u for start method type %d\n", buf->header.length, ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC); rc = -EINVAL; goto out; } crb_smc = ACPI_ADD_PTR(struct tpm2_crb_smc, buf, sizeof(*buf)); priv->smc_func_id = crb_smc->smc_func_id; } if (sm == ACPI_TPM2_COMMAND_BUFFER_WITH_PLUTON) { if (buf->header.length < (sizeof(*buf) + sizeof(*crb_pluton))) { dev_err(dev, FW_BUG "TPM2 ACPI table has wrong size %u for start method type %d\n", buf->header.length, ACPI_TPM2_COMMAND_BUFFER_WITH_PLUTON); return -EINVAL; } crb_pluton = ACPI_ADD_PTR(struct tpm2_crb_pluton, buf, sizeof(*buf)); rc = crb_map_pluton(dev, priv, buf, crb_pluton); if (rc) return rc; } priv->sm = sm; priv->hid = acpi_device_hid(device); rc = crb_map_io(device, priv, buf); if (rc) goto out; chip = tpmm_chip_alloc(dev, &tpm_crb); if (IS_ERR(chip)) { rc = PTR_ERR(chip); goto out; } dev_set_drvdata(&chip->dev, priv); chip->acpi_dev_handle = device->handle; chip->flags = TPM_CHIP_FLAG_TPM2; rc = tpm_chip_register(chip); out: acpi_put_table((struct acpi_table_header *)buf); return rc; } static void crb_acpi_remove(struct acpi_device *device) { struct device *dev = &device->dev; struct tpm_chip *chip = dev_get_drvdata(dev); tpm_chip_unregister(chip); } static const struct dev_pm_ops crb_pm = { SET_SYSTEM_SLEEP_PM_OPS(tpm_pm_suspend, tpm_pm_resume) }; static const struct acpi_device_id crb_device_ids[] = { {"MSFT0101", 0}, {"", 0}, }; MODULE_DEVICE_TABLE(acpi, crb_device_ids); static struct acpi_driver crb_acpi_driver = { .name = "tpm_crb", .ids = crb_device_ids, .ops = { .add = crb_acpi_add, .remove = crb_acpi_remove, }, .drv = { .pm = &crb_pm, }, }; module_acpi_driver(crb_acpi_driver); MODULE_AUTHOR("Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>"); MODULE_DESCRIPTION("TPM2 Driver"); MODULE_VERSION("0.1"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1