Contributors: 13
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| David Brownell |
263 |
32.00% |
1 |
3.85% |
| Alexandre Belloni |
219 |
26.64% |
4 |
15.38% |
| Andrew Victor |
153 |
18.61% |
5 |
19.23% |
| Viresh Kumar |
63 |
7.66% |
1 |
3.85% |
| Daniel Lezcano |
50 |
6.08% |
2 |
7.69% |
| Joachim Eastwood |
44 |
5.35% |
2 |
7.69% |
| Uwe Kleine-König |
14 |
1.70% |
2 |
7.69% |
| Thomas Gleixner |
6 |
0.73% |
4 |
15.38% |
| Magnus Damm |
4 |
0.49% |
1 |
3.85% |
| Bernhard Walle |
2 |
0.24% |
1 |
3.85% |
| Russell King |
2 |
0.24% |
1 |
3.85% |
| Rusty Russell |
1 |
0.12% |
1 |
3.85% |
| Jason Yan |
1 |
0.12% |
1 |
3.85% |
| Total |
822 |
|
26 |
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* linux/arch/arm/mach-at91/at91rm9200_time.c
*
* Copyright (C) 2003 SAN People
* Copyright (C) 2003 ATMEL
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/export.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/atmel-st.h>
#include <linux/of_irq.h>
#include <linux/regmap.h>
static unsigned long last_crtr;
static u32 irqmask;
static struct clock_event_device clkevt;
static struct regmap *regmap_st;
static int timer_latch;
/*
* The ST_CRTR is updated asynchronously to the master clock ... but
* the updates as seen by the CPU don't seem to be strictly monotonic.
* Waiting until we read the same value twice avoids glitching.
*/
static inline unsigned long read_CRTR(void)
{
unsigned int x1, x2;
regmap_read(regmap_st, AT91_ST_CRTR, &x1);
do {
regmap_read(regmap_st, AT91_ST_CRTR, &x2);
if (x1 == x2)
break;
x1 = x2;
} while (1);
return x1;
}
/*
* IRQ handler for the timer.
*/
static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
{
u32 sr;
regmap_read(regmap_st, AT91_ST_SR, &sr);
sr &= irqmask;
/*
* irqs should be disabled here, but as the irq is shared they are only
* guaranteed to be off if the timer irq is registered first.
*/
WARN_ON_ONCE(!irqs_disabled());
/* simulate "oneshot" timer with alarm */
if (sr & AT91_ST_ALMS) {
clkevt.event_handler(&clkevt);
return IRQ_HANDLED;
}
/* periodic mode should handle delayed ticks */
if (sr & AT91_ST_PITS) {
u32 crtr = read_CRTR();
while (((crtr - last_crtr) & AT91_ST_CRTV) >= timer_latch) {
last_crtr += timer_latch;
clkevt.event_handler(&clkevt);
}
return IRQ_HANDLED;
}
/* this irq is shared ... */
return IRQ_NONE;
}
static u64 read_clk32k(struct clocksource *cs)
{
return read_CRTR();
}
static struct clocksource clk32k = {
.name = "32k_counter",
.rating = 150,
.read = read_clk32k,
.mask = CLOCKSOURCE_MASK(20),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static void clkdev32k_disable_and_flush_irq(void)
{
unsigned int val;
/* Disable and flush pending timer interrupts */
regmap_write(regmap_st, AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS);
regmap_read(regmap_st, AT91_ST_SR, &val);
last_crtr = read_CRTR();
}
static int clkevt32k_shutdown(struct clock_event_device *evt)
{
clkdev32k_disable_and_flush_irq();
irqmask = 0;
regmap_write(regmap_st, AT91_ST_IER, irqmask);
return 0;
}
static int clkevt32k_set_oneshot(struct clock_event_device *dev)
{
clkdev32k_disable_and_flush_irq();
/*
* ALM for oneshot irqs, set by next_event()
* before 32 seconds have passed.
*/
irqmask = AT91_ST_ALMS;
regmap_write(regmap_st, AT91_ST_RTAR, last_crtr);
regmap_write(regmap_st, AT91_ST_IER, irqmask);
return 0;
}
static int clkevt32k_set_periodic(struct clock_event_device *dev)
{
clkdev32k_disable_and_flush_irq();
/* PIT for periodic irqs; fixed rate of 1/HZ */
irqmask = AT91_ST_PITS;
regmap_write(regmap_st, AT91_ST_PIMR, timer_latch);
regmap_write(regmap_st, AT91_ST_IER, irqmask);
return 0;
}
static int
clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
{
u32 alm;
unsigned int val;
BUG_ON(delta < 2);
/* The alarm IRQ uses absolute time (now+delta), not the relative
* time (delta) in our calling convention. Like all clockevents
* using such "match" hardware, we have a race to defend against.
*
* Our defense here is to have set up the clockevent device so the
* delta is at least two. That way we never end up writing RTAR
* with the value then held in CRTR ... which would mean the match
* wouldn't trigger until 32 seconds later, after CRTR wraps.
*/
alm = read_CRTR();
/* Cancel any pending alarm; flush any pending IRQ */
regmap_write(regmap_st, AT91_ST_RTAR, alm);
regmap_read(regmap_st, AT91_ST_SR, &val);
/* Schedule alarm by writing RTAR. */
alm += delta;
regmap_write(regmap_st, AT91_ST_RTAR, alm);
return 0;
}
static struct clock_event_device clkevt = {
.name = "at91_tick",
.features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT,
.rating = 150,
.set_next_event = clkevt32k_next_event,
.set_state_shutdown = clkevt32k_shutdown,
.set_state_periodic = clkevt32k_set_periodic,
.set_state_oneshot = clkevt32k_set_oneshot,
.tick_resume = clkevt32k_shutdown,
};
/*
* ST (system timer) module supports both clockevents and clocksource.
*/
static int __init atmel_st_timer_init(struct device_node *node)
{
struct clk *sclk;
unsigned int sclk_rate, val;
int irq, ret;
regmap_st = syscon_node_to_regmap(node);
if (IS_ERR(regmap_st)) {
pr_err("Unable to get regmap\n");
return PTR_ERR(regmap_st);
}
/* Disable all timer interrupts, and clear any pending ones */
regmap_write(regmap_st, AT91_ST_IDR,
AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
regmap_read(regmap_st, AT91_ST_SR, &val);
/* Get the interrupts property */
irq = irq_of_parse_and_map(node, 0);
if (!irq) {
pr_err("Unable to get IRQ from DT\n");
return -EINVAL;
}
/* Make IRQs happen for the system timer */
ret = request_irq(irq, at91rm9200_timer_interrupt,
IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
"at91_tick", regmap_st);
if (ret) {
pr_err("Unable to setup IRQ\n");
return ret;
}
sclk = of_clk_get(node, 0);
if (IS_ERR(sclk)) {
pr_err("Unable to get slow clock\n");
return PTR_ERR(sclk);
}
ret = clk_prepare_enable(sclk);
if (ret) {
pr_err("Could not enable slow clock\n");
return ret;
}
sclk_rate = clk_get_rate(sclk);
if (!sclk_rate) {
pr_err("Invalid slow clock rate\n");
return -EINVAL;
}
timer_latch = (sclk_rate + HZ / 2) / HZ;
/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
* directly for the clocksource and all clockevents, after adjusting
* its prescaler from the 1 Hz default.
*/
regmap_write(regmap_st, AT91_ST_RTMR, 1);
/* Setup timer clockevent, with minimum of two ticks (important!!) */
clkevt.cpumask = cpumask_of(0);
clockevents_config_and_register(&clkevt, sclk_rate,
2, AT91_ST_ALMV);
/* register clocksource */
return clocksource_register_hz(&clk32k, sclk_rate);
}
TIMER_OF_DECLARE(atmel_st_timer, "atmel,at91rm9200-st",
atmel_st_timer_init);