Contributors: 3
Author Tokens Token Proportion Commits Commit Proportion
Tomasz Figa 1586 99.06% 1 25.00%
Linus Walleij 14 0.87% 2 50.00%
Uwe Kleine-König 1 0.06% 1 25.00%
Total 1601 4


// SPDX-License-Identifier: GPL-2.0+
/*
 * extcon-fsa9480.c - Fairchild Semiconductor FSA9480 extcon driver
 *
 * Copyright (c) 2019 Tomasz Figa <tomasz.figa@gmail.com>
 *
 * Loosely based on old fsa9480 misc-device driver.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/bitops.h>
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/kobject.h>
#include <linux/extcon-provider.h>
#include <linux/irqdomain.h>
#include <linux/regmap.h>

/* FSA9480 I2C registers */
#define FSA9480_REG_DEVID               0x01
#define FSA9480_REG_CTRL                0x02
#define FSA9480_REG_INT1                0x03
#define FSA9480_REG_INT2                0x04
#define FSA9480_REG_INT1_MASK           0x05
#define FSA9480_REG_INT2_MASK           0x06
#define FSA9480_REG_ADC                 0x07
#define FSA9480_REG_TIMING1             0x08
#define FSA9480_REG_TIMING2             0x09
#define FSA9480_REG_DEV_T1              0x0a
#define FSA9480_REG_DEV_T2              0x0b
#define FSA9480_REG_BTN1                0x0c
#define FSA9480_REG_BTN2                0x0d
#define FSA9480_REG_CK                  0x0e
#define FSA9480_REG_CK_INT1             0x0f
#define FSA9480_REG_CK_INT2             0x10
#define FSA9480_REG_CK_INTMASK1         0x11
#define FSA9480_REG_CK_INTMASK2         0x12
#define FSA9480_REG_MANSW1              0x13
#define FSA9480_REG_MANSW2              0x14
#define FSA9480_REG_END                 0x15

/* Control */
#define CON_SWITCH_OPEN         (1 << 4)
#define CON_RAW_DATA            (1 << 3)
#define CON_MANUAL_SW           (1 << 2)
#define CON_WAIT                (1 << 1)
#define CON_INT_MASK            (1 << 0)
#define CON_MASK                (CON_SWITCH_OPEN | CON_RAW_DATA | \
				 CON_MANUAL_SW | CON_WAIT)

/* Device Type 1 */
#define DEV_USB_OTG             7
#define DEV_DEDICATED_CHG       6
#define DEV_USB_CHG             5
#define DEV_CAR_KIT             4
#define DEV_UART                3
#define DEV_USB                 2
#define DEV_AUDIO_2             1
#define DEV_AUDIO_1             0

#define DEV_T1_USB_MASK         (DEV_USB_OTG | DEV_USB)
#define DEV_T1_UART_MASK        (DEV_UART)
#define DEV_T1_CHARGER_MASK     (DEV_DEDICATED_CHG | DEV_USB_CHG)

/* Device Type 2 */
#define DEV_AV                  14
#define DEV_TTY                 13
#define DEV_PPD                 12
#define DEV_JIG_UART_OFF        11
#define DEV_JIG_UART_ON         10
#define DEV_JIG_USB_OFF         9
#define DEV_JIG_USB_ON          8

#define DEV_T2_USB_MASK         (DEV_JIG_USB_OFF | DEV_JIG_USB_ON)
#define DEV_T2_UART_MASK        (DEV_JIG_UART_OFF | DEV_JIG_UART_ON)
#define DEV_T2_JIG_MASK         (DEV_JIG_USB_OFF | DEV_JIG_USB_ON | \
				 DEV_JIG_UART_OFF | DEV_JIG_UART_ON)

/*
 * Manual Switch
 * D- [7:5] / D+ [4:2]
 * 000: Open all / 001: USB / 010: AUDIO / 011: UART / 100: V_AUDIO
 */
#define SW_VAUDIO               ((4 << 5) | (4 << 2))
#define SW_UART                 ((3 << 5) | (3 << 2))
#define SW_AUDIO                ((2 << 5) | (2 << 2))
#define SW_DHOST                ((1 << 5) | (1 << 2))
#define SW_AUTO                 ((0 << 5) | (0 << 2))

/* Interrupt 1 */
#define INT1_MASK               (0xff << 0)
#define INT_DETACH              (1 << 1)
#define INT_ATTACH              (1 << 0)

/* Interrupt 2 mask */
#define INT2_MASK               (0x1f << 0)

/* Timing Set 1 */
#define TIMING1_ADC_500MS       (0x6 << 0)

struct fsa9480_usbsw {
	struct device *dev;
	struct regmap *regmap;
	struct extcon_dev *edev;
	u16 cable;
};

static const unsigned int fsa9480_extcon_cable[] = {
	EXTCON_USB_HOST,
	EXTCON_USB,
	EXTCON_CHG_USB_DCP,
	EXTCON_CHG_USB_SDP,
	EXTCON_CHG_USB_ACA,
	EXTCON_JACK_LINE_OUT,
	EXTCON_JACK_VIDEO_OUT,
	EXTCON_JIG,

	EXTCON_NONE,
};

static const u64 cable_types[] = {
	[DEV_USB_OTG] = BIT_ULL(EXTCON_USB_HOST),
	[DEV_DEDICATED_CHG] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_CHG_USB_DCP),
	[DEV_USB_CHG] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_CHG_USB_SDP),
	[DEV_CAR_KIT] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_CHG_USB_SDP)
			| BIT_ULL(EXTCON_JACK_LINE_OUT),
	[DEV_UART] = BIT_ULL(EXTCON_JIG),
	[DEV_USB] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_CHG_USB_SDP),
	[DEV_AUDIO_2] = BIT_ULL(EXTCON_JACK_LINE_OUT),
	[DEV_AUDIO_1] = BIT_ULL(EXTCON_JACK_LINE_OUT),
	[DEV_AV] = BIT_ULL(EXTCON_JACK_LINE_OUT)
		   | BIT_ULL(EXTCON_JACK_VIDEO_OUT),
	[DEV_TTY] = BIT_ULL(EXTCON_JIG),
	[DEV_PPD] = BIT_ULL(EXTCON_JACK_LINE_OUT) | BIT_ULL(EXTCON_CHG_USB_ACA),
	[DEV_JIG_UART_OFF] = BIT_ULL(EXTCON_JIG),
	[DEV_JIG_UART_ON] = BIT_ULL(EXTCON_JIG),
	[DEV_JIG_USB_OFF] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_JIG),
	[DEV_JIG_USB_ON] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_JIG),
};

/* Define regmap configuration of FSA9480 for I2C communication  */
static bool fsa9480_volatile_reg(struct device *dev, unsigned int reg)
{
	switch (reg) {
	case FSA9480_REG_INT1_MASK:
		return true;
	default:
		break;
	}
	return false;
}

static const struct regmap_config fsa9480_regmap_config = {
	.reg_bits	= 8,
	.val_bits	= 8,
	.volatile_reg	= fsa9480_volatile_reg,
	.max_register	= FSA9480_REG_END,
};

static int fsa9480_write_reg(struct fsa9480_usbsw *usbsw, int reg, int value)
{
	int ret;

	ret = regmap_write(usbsw->regmap, reg, value);
	if (ret < 0)
		dev_err(usbsw->dev, "%s: err %d\n", __func__, ret);

	return ret;
}

static int fsa9480_read_reg(struct fsa9480_usbsw *usbsw, int reg)
{
	int ret, val;

	ret = regmap_read(usbsw->regmap, reg, &val);
	if (ret < 0) {
		dev_err(usbsw->dev, "%s: err %d\n", __func__, ret);
		return ret;
	}

	return val;
}

static int fsa9480_read_irq(struct fsa9480_usbsw *usbsw, int *value)
{
	u8 regs[2];
	int ret;

	ret = regmap_bulk_read(usbsw->regmap, FSA9480_REG_INT1, regs, 2);
	if (ret < 0)
		dev_err(usbsw->dev, "%s: err %d\n", __func__, ret);

	*value = regs[1] << 8 | regs[0];
	return ret;
}

static void fsa9480_handle_change(struct fsa9480_usbsw *usbsw,
				  u16 mask, bool attached)
{
	while (mask) {
		int dev = fls64(mask) - 1;
		u64 cables = cable_types[dev];

		while (cables) {
			int cable = fls64(cables) - 1;

			extcon_set_state_sync(usbsw->edev, cable, attached);
			cables &= ~BIT_ULL(cable);
		}

		mask &= ~BIT_ULL(dev);
	}
}

static void fsa9480_detect_dev(struct fsa9480_usbsw *usbsw)
{
	int val1, val2;
	u16 val;

	val1 = fsa9480_read_reg(usbsw, FSA9480_REG_DEV_T1);
	val2 = fsa9480_read_reg(usbsw, FSA9480_REG_DEV_T2);
	if (val1 < 0 || val2 < 0) {
		dev_err(usbsw->dev, "%s: failed to read registers", __func__);
		return;
	}
	val = val2 << 8 | val1;

	dev_info(usbsw->dev, "dev1: 0x%x, dev2: 0x%x\n", val1, val2);

	/* handle detached cables first */
	fsa9480_handle_change(usbsw, usbsw->cable & ~val, false);

	/* then handle attached ones */
	fsa9480_handle_change(usbsw, val & ~usbsw->cable, true);

	usbsw->cable = val;
}

static irqreturn_t fsa9480_irq_handler(int irq, void *data)
{
	struct fsa9480_usbsw *usbsw = data;
	int intr = 0;

	/* clear interrupt */
	fsa9480_read_irq(usbsw, &intr);
	if (!intr)
		return IRQ_NONE;

	/* device detection */
	fsa9480_detect_dev(usbsw);

	return IRQ_HANDLED;
}

static int fsa9480_probe(struct i2c_client *client)
{
	struct fsa9480_usbsw *info;
	int ret;

	if (!client->irq) {
		dev_err(&client->dev, "no interrupt provided\n");
		return -EINVAL;
	}

	info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL);
	if (!info)
		return -ENOMEM;
	info->dev = &client->dev;

	i2c_set_clientdata(client, info);

	/* External connector */
	info->edev = devm_extcon_dev_allocate(info->dev,
					      fsa9480_extcon_cable);
	if (IS_ERR(info->edev)) {
		dev_err(info->dev, "failed to allocate memory for extcon\n");
		ret = -ENOMEM;
		return ret;
	}

	ret = devm_extcon_dev_register(info->dev, info->edev);
	if (ret) {
		dev_err(info->dev, "failed to register extcon device\n");
		return ret;
	}

	info->regmap = devm_regmap_init_i2c(client, &fsa9480_regmap_config);
	if (IS_ERR(info->regmap)) {
		ret = PTR_ERR(info->regmap);
		dev_err(info->dev, "failed to allocate register map: %d\n",
			ret);
		return ret;
	}

	/* ADC Detect Time: 500ms */
	fsa9480_write_reg(info, FSA9480_REG_TIMING1, TIMING1_ADC_500MS);

	/* configure automatic switching */
	fsa9480_write_reg(info, FSA9480_REG_CTRL, CON_MASK);

	/* unmask interrupt (attach/detach only) */
	fsa9480_write_reg(info, FSA9480_REG_INT1_MASK,
			  INT1_MASK & ~(INT_ATTACH | INT_DETACH));
	fsa9480_write_reg(info, FSA9480_REG_INT2_MASK, INT2_MASK);

	ret = devm_request_threaded_irq(info->dev, client->irq, NULL,
					fsa9480_irq_handler,
					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
					"fsa9480", info);
	if (ret) {
		dev_err(info->dev, "failed to request IRQ\n");
		return ret;
	}

	device_init_wakeup(info->dev, true);
	fsa9480_detect_dev(info);

	return 0;
}

#ifdef CONFIG_PM_SLEEP
static int fsa9480_suspend(struct device *dev)
{
	struct i2c_client *client = to_i2c_client(dev);

	if (device_may_wakeup(&client->dev) && client->irq)
		enable_irq_wake(client->irq);

	return 0;
}

static int fsa9480_resume(struct device *dev)
{
	struct i2c_client *client = to_i2c_client(dev);

	if (device_may_wakeup(&client->dev) && client->irq)
		disable_irq_wake(client->irq);

	return 0;
}
#endif

static const struct dev_pm_ops fsa9480_pm_ops = {
	SET_SYSTEM_SLEEP_PM_OPS(fsa9480_suspend, fsa9480_resume)
};

static const struct i2c_device_id fsa9480_id[] = {
	{ "fsa9480", 0 },
	{}
};
MODULE_DEVICE_TABLE(i2c, fsa9480_id);

static const struct of_device_id fsa9480_of_match[] = {
	{ .compatible = "fcs,fsa9480", },
	{ .compatible = "fcs,fsa880", },
	{ .compatible = "ti,tsu6111", },
	{ },
};
MODULE_DEVICE_TABLE(of, fsa9480_of_match);

static struct i2c_driver fsa9480_i2c_driver = {
	.driver			= {
		.name		= "fsa9480",
		.pm		= &fsa9480_pm_ops,
		.of_match_table = fsa9480_of_match,
	},
	.probe_new		= fsa9480_probe,
	.id_table		= fsa9480_id,
};

static int __init fsa9480_module_init(void)
{
	return i2c_add_driver(&fsa9480_i2c_driver);
}
subsys_initcall(fsa9480_module_init);

static void __exit fsa9480_module_exit(void)
{
	i2c_del_driver(&fsa9480_i2c_driver);
}
module_exit(fsa9480_module_exit);

MODULE_DESCRIPTION("Fairchild Semiconductor FSA9480 extcon driver");
MODULE_AUTHOR("Tomasz Figa <tomasz.figa@gmail.com>");
MODULE_LICENSE("GPL");