Contributors: 35
Author Tokens Token Proportion Commits Commit Proportion
Shawn Guo 922 29.78% 11 15.94%
Anson Huang 508 16.41% 7 10.14%
Juergen Beisert 440 14.21% 1 1.45%
shenwei.wang at nxp.com 404 13.05% 1 1.45%
Guennadi Liakhovetski 157 5.07% 2 2.90%
Benoît Thébaudeau 135 4.36% 1 1.45%
Dinh Nguyen 86 2.78% 1 1.45%
Fabio Estevam 83 2.68% 4 5.80%
Marek Vašut 72 2.33% 2 2.90%
Uwe Kleine-König 47 1.52% 6 8.70%
Bartosz Golaszewski 42 1.36% 3 4.35%
Peng Fan 32 1.03% 1 1.45%
Philipp Rosenberger 26 0.84% 2 2.90%
Linus Walleij 24 0.78% 2 2.90%
Vladimir Zapolskiy 18 0.58% 3 4.35%
Eric Bénard 16 0.52% 1 1.45%
Lennert Buytenhek 14 0.45% 1 1.45%
Sascha Hauer 11 0.36% 2 2.90%
Ulises Brindis 8 0.26% 1 1.45%
Grant C. Likely 7 0.23% 2 2.90%
Laxman Dewangan 7 0.23% 1 1.45%
Jiang Liu 6 0.19% 1 1.45%
Dan Carpenter 5 0.16% 1 1.45%
Dmitry Eremin-Solenikov 4 0.13% 1 1.45%
Catalin Marinas 3 0.10% 1 1.45%
Quinn Jensen 3 0.10% 1 1.45%
Sachin Kamat 3 0.10% 1 1.45%
Loic Poulain 2 0.06% 1 1.45%
Enrico Weigelt 2 0.06% 1 1.45%
Linus Torvalds 2 0.06% 1 1.45%
Russell King 2 0.06% 1 1.45%
Alexander Stein 2 0.06% 1 1.45%
Paulius Zaleckas 1 0.03% 1 1.45%
Christoph Hellwig 1 0.03% 1 1.45%
Marc Zyngier 1 0.03% 1 1.45%
Total 3096 69


// SPDX-License-Identifier: GPL-2.0+
//
// MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
// Copyright 2008 Juergen Beisert, kernel@pengutronix.de
//
// Based on code from Freescale Semiconductor,
// Authors: Daniel Mack, Juergen Beisert.
// Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.

#include <linux/clk.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/syscore_ops.h>
#include <linux/gpio/driver.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/bug.h>

#define IMX_SCU_WAKEUP_OFF		0
#define IMX_SCU_WAKEUP_LOW_LVL		4
#define IMX_SCU_WAKEUP_FALL_EDGE	5
#define IMX_SCU_WAKEUP_RISE_EDGE	6
#define IMX_SCU_WAKEUP_HIGH_LVL		7

/* device type dependent stuff */
struct mxc_gpio_hwdata {
	unsigned dr_reg;
	unsigned gdir_reg;
	unsigned psr_reg;
	unsigned icr1_reg;
	unsigned icr2_reg;
	unsigned imr_reg;
	unsigned isr_reg;
	int edge_sel_reg;
	unsigned low_level;
	unsigned high_level;
	unsigned rise_edge;
	unsigned fall_edge;
};

struct mxc_gpio_reg_saved {
	u32 icr1;
	u32 icr2;
	u32 imr;
	u32 gdir;
	u32 edge_sel;
	u32 dr;
};

struct mxc_gpio_port {
	struct list_head node;
	void __iomem *base;
	struct clk *clk;
	int irq;
	int irq_high;
	struct irq_domain *domain;
	struct gpio_chip gc;
	struct device *dev;
	u32 both_edges;
	struct mxc_gpio_reg_saved gpio_saved_reg;
	bool power_off;
	u32 wakeup_pads;
	bool is_pad_wakeup;
	u32 pad_type[32];
	const struct mxc_gpio_hwdata *hwdata;
};

static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = {
	.dr_reg		= 0x1c,
	.gdir_reg	= 0x00,
	.psr_reg	= 0x24,
	.icr1_reg	= 0x28,
	.icr2_reg	= 0x2c,
	.imr_reg	= 0x30,
	.isr_reg	= 0x34,
	.edge_sel_reg	= -EINVAL,
	.low_level	= 0x03,
	.high_level	= 0x02,
	.rise_edge	= 0x00,
	.fall_edge	= 0x01,
};

static struct mxc_gpio_hwdata imx31_gpio_hwdata = {
	.dr_reg		= 0x00,
	.gdir_reg	= 0x04,
	.psr_reg	= 0x08,
	.icr1_reg	= 0x0c,
	.icr2_reg	= 0x10,
	.imr_reg	= 0x14,
	.isr_reg	= 0x18,
	.edge_sel_reg	= -EINVAL,
	.low_level	= 0x00,
	.high_level	= 0x01,
	.rise_edge	= 0x02,
	.fall_edge	= 0x03,
};

static struct mxc_gpio_hwdata imx35_gpio_hwdata = {
	.dr_reg		= 0x00,
	.gdir_reg	= 0x04,
	.psr_reg	= 0x08,
	.icr1_reg	= 0x0c,
	.icr2_reg	= 0x10,
	.imr_reg	= 0x14,
	.isr_reg	= 0x18,
	.edge_sel_reg	= 0x1c,
	.low_level	= 0x00,
	.high_level	= 0x01,
	.rise_edge	= 0x02,
	.fall_edge	= 0x03,
};

#define GPIO_DR			(port->hwdata->dr_reg)
#define GPIO_GDIR		(port->hwdata->gdir_reg)
#define GPIO_PSR		(port->hwdata->psr_reg)
#define GPIO_ICR1		(port->hwdata->icr1_reg)
#define GPIO_ICR2		(port->hwdata->icr2_reg)
#define GPIO_IMR		(port->hwdata->imr_reg)
#define GPIO_ISR		(port->hwdata->isr_reg)
#define GPIO_EDGE_SEL		(port->hwdata->edge_sel_reg)

#define GPIO_INT_LOW_LEV	(port->hwdata->low_level)
#define GPIO_INT_HIGH_LEV	(port->hwdata->high_level)
#define GPIO_INT_RISE_EDGE	(port->hwdata->rise_edge)
#define GPIO_INT_FALL_EDGE	(port->hwdata->fall_edge)
#define GPIO_INT_BOTH_EDGES	0x4

static const struct of_device_id mxc_gpio_dt_ids[] = {
	{ .compatible = "fsl,imx1-gpio", .data =  &imx1_imx21_gpio_hwdata },
	{ .compatible = "fsl,imx21-gpio", .data = &imx1_imx21_gpio_hwdata },
	{ .compatible = "fsl,imx31-gpio", .data = &imx31_gpio_hwdata },
	{ .compatible = "fsl,imx35-gpio", .data = &imx35_gpio_hwdata },
	{ .compatible = "fsl,imx7d-gpio", .data = &imx35_gpio_hwdata },
	{ .compatible = "fsl,imx8dxl-gpio", .data = &imx35_gpio_hwdata },
	{ .compatible = "fsl,imx8qm-gpio", .data = &imx35_gpio_hwdata },
	{ .compatible = "fsl,imx8qxp-gpio", .data = &imx35_gpio_hwdata },
	{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mxc_gpio_dt_ids);

/*
 * MX2 has one interrupt *for all* gpio ports. The list is used
 * to save the references to all ports, so that mx2_gpio_irq_handler
 * can walk through all interrupt status registers.
 */
static LIST_HEAD(mxc_gpio_ports);

/* Note: This driver assumes 32 GPIOs are handled in one register */

static int gpio_set_irq_type(struct irq_data *d, u32 type)
{
	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
	struct mxc_gpio_port *port = gc->private;
	unsigned long flags;
	u32 bit, val;
	u32 gpio_idx = d->hwirq;
	int edge;
	void __iomem *reg = port->base;

	port->both_edges &= ~(1 << gpio_idx);
	switch (type) {
	case IRQ_TYPE_EDGE_RISING:
		edge = GPIO_INT_RISE_EDGE;
		break;
	case IRQ_TYPE_EDGE_FALLING:
		edge = GPIO_INT_FALL_EDGE;
		break;
	case IRQ_TYPE_EDGE_BOTH:
		if (GPIO_EDGE_SEL >= 0) {
			edge = GPIO_INT_BOTH_EDGES;
		} else {
			val = port->gc.get(&port->gc, gpio_idx);
			if (val) {
				edge = GPIO_INT_LOW_LEV;
				pr_debug("mxc: set GPIO %d to low trigger\n", gpio_idx);
			} else {
				edge = GPIO_INT_HIGH_LEV;
				pr_debug("mxc: set GPIO %d to high trigger\n", gpio_idx);
			}
			port->both_edges |= 1 << gpio_idx;
		}
		break;
	case IRQ_TYPE_LEVEL_LOW:
		edge = GPIO_INT_LOW_LEV;
		break;
	case IRQ_TYPE_LEVEL_HIGH:
		edge = GPIO_INT_HIGH_LEV;
		break;
	default:
		return -EINVAL;
	}

	raw_spin_lock_irqsave(&port->gc.bgpio_lock, flags);

	if (GPIO_EDGE_SEL >= 0) {
		val = readl(port->base + GPIO_EDGE_SEL);
		if (edge == GPIO_INT_BOTH_EDGES)
			writel(val | (1 << gpio_idx),
				port->base + GPIO_EDGE_SEL);
		else
			writel(val & ~(1 << gpio_idx),
				port->base + GPIO_EDGE_SEL);
	}

	if (edge != GPIO_INT_BOTH_EDGES) {
		reg += GPIO_ICR1 + ((gpio_idx & 0x10) >> 2); /* lower or upper register */
		bit = gpio_idx & 0xf;
		val = readl(reg) & ~(0x3 << (bit << 1));
		writel(val | (edge << (bit << 1)), reg);
	}

	writel(1 << gpio_idx, port->base + GPIO_ISR);
	port->pad_type[gpio_idx] = type;

	raw_spin_unlock_irqrestore(&port->gc.bgpio_lock, flags);

	return port->gc.direction_input(&port->gc, gpio_idx);
}

static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
{
	void __iomem *reg = port->base;
	unsigned long flags;
	u32 bit, val;
	int edge;

	raw_spin_lock_irqsave(&port->gc.bgpio_lock, flags);

	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
	bit = gpio & 0xf;
	val = readl(reg);
	edge = (val >> (bit << 1)) & 3;
	val &= ~(0x3 << (bit << 1));
	if (edge == GPIO_INT_HIGH_LEV) {
		edge = GPIO_INT_LOW_LEV;
		pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
	} else if (edge == GPIO_INT_LOW_LEV) {
		edge = GPIO_INT_HIGH_LEV;
		pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
	} else {
		pr_err("mxc: invalid configuration for GPIO %d: %x\n",
		       gpio, edge);
		goto unlock;
	}
	writel(val | (edge << (bit << 1)), reg);

unlock:
	raw_spin_unlock_irqrestore(&port->gc.bgpio_lock, flags);
}

/* handle 32 interrupts in one status register */
static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
{
	while (irq_stat != 0) {
		int irqoffset = fls(irq_stat) - 1;

		if (port->both_edges & (1 << irqoffset))
			mxc_flip_edge(port, irqoffset);

		generic_handle_domain_irq(port->domain, irqoffset);

		irq_stat &= ~(1 << irqoffset);
	}
}

/* MX1 and MX3 has one interrupt *per* gpio port */
static void mx3_gpio_irq_handler(struct irq_desc *desc)
{
	u32 irq_stat;
	struct mxc_gpio_port *port = irq_desc_get_handler_data(desc);
	struct irq_chip *chip = irq_desc_get_chip(desc);

	if (port->is_pad_wakeup)
		return;

	chained_irq_enter(chip, desc);

	irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR);

	mxc_gpio_irq_handler(port, irq_stat);

	chained_irq_exit(chip, desc);
}

/* MX2 has one interrupt *for all* gpio ports */
static void mx2_gpio_irq_handler(struct irq_desc *desc)
{
	u32 irq_msk, irq_stat;
	struct mxc_gpio_port *port;
	struct irq_chip *chip = irq_desc_get_chip(desc);

	chained_irq_enter(chip, desc);

	/* walk through all interrupt status registers */
	list_for_each_entry(port, &mxc_gpio_ports, node) {
		irq_msk = readl(port->base + GPIO_IMR);
		if (!irq_msk)
			continue;

		irq_stat = readl(port->base + GPIO_ISR) & irq_msk;
		if (irq_stat)
			mxc_gpio_irq_handler(port, irq_stat);
	}
	chained_irq_exit(chip, desc);
}

/*
 * Set interrupt number "irq" in the GPIO as a wake-up source.
 * While system is running, all registered GPIO interrupts need to have
 * wake-up enabled. When system is suspended, only selected GPIO interrupts
 * need to have wake-up enabled.
 * @param  irq          interrupt source number
 * @param  enable       enable as wake-up if equal to non-zero
 * @return       This function returns 0 on success.
 */
static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
{
	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
	struct mxc_gpio_port *port = gc->private;
	u32 gpio_idx = d->hwirq;
	int ret;

	if (enable) {
		if (port->irq_high && (gpio_idx >= 16))
			ret = enable_irq_wake(port->irq_high);
		else
			ret = enable_irq_wake(port->irq);
		port->wakeup_pads |= (1 << gpio_idx);
	} else {
		if (port->irq_high && (gpio_idx >= 16))
			ret = disable_irq_wake(port->irq_high);
		else
			ret = disable_irq_wake(port->irq);
		port->wakeup_pads &= ~(1 << gpio_idx);
	}

	return ret;
}

static int mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
{
	struct irq_chip_generic *gc;
	struct irq_chip_type *ct;
	int rv;

	gc = devm_irq_alloc_generic_chip(port->dev, "gpio-mxc", 1, irq_base,
					 port->base, handle_level_irq);
	if (!gc)
		return -ENOMEM;
	gc->private = port;

	ct = gc->chip_types;
	ct->chip.irq_ack = irq_gc_ack_set_bit;
	ct->chip.irq_mask = irq_gc_mask_clr_bit;
	ct->chip.irq_unmask = irq_gc_mask_set_bit;
	ct->chip.irq_set_type = gpio_set_irq_type;
	ct->chip.irq_set_wake = gpio_set_wake_irq;
	ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND;
	ct->regs.ack = GPIO_ISR;
	ct->regs.mask = GPIO_IMR;

	rv = devm_irq_setup_generic_chip(port->dev, gc, IRQ_MSK(32),
					 IRQ_GC_INIT_NESTED_LOCK,
					 IRQ_NOREQUEST, 0);

	return rv;
}

static int mxc_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
{
	struct mxc_gpio_port *port = gpiochip_get_data(gc);

	return irq_find_mapping(port->domain, offset);
}

static int mxc_gpio_probe(struct platform_device *pdev)
{
	struct device_node *np = pdev->dev.of_node;
	struct mxc_gpio_port *port;
	int irq_count;
	int irq_base;
	int err;

	port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
	if (!port)
		return -ENOMEM;

	port->dev = &pdev->dev;
	port->hwdata = device_get_match_data(&pdev->dev);

	port->base = devm_platform_ioremap_resource(pdev, 0);
	if (IS_ERR(port->base))
		return PTR_ERR(port->base);

	irq_count = platform_irq_count(pdev);
	if (irq_count < 0)
		return irq_count;

	if (irq_count > 1) {
		port->irq_high = platform_get_irq(pdev, 1);
		if (port->irq_high < 0)
			port->irq_high = 0;
	}

	port->irq = platform_get_irq(pdev, 0);
	if (port->irq < 0)
		return port->irq;

	/* the controller clock is optional */
	port->clk = devm_clk_get_optional(&pdev->dev, NULL);
	if (IS_ERR(port->clk))
		return PTR_ERR(port->clk);

	err = clk_prepare_enable(port->clk);
	if (err) {
		dev_err(&pdev->dev, "Unable to enable clock.\n");
		return err;
	}

	if (of_device_is_compatible(np, "fsl,imx7d-gpio"))
		port->power_off = true;

	/* disable the interrupt and clear the status */
	writel(0, port->base + GPIO_IMR);
	writel(~0, port->base + GPIO_ISR);

	if (of_device_is_compatible(np, "fsl,imx21-gpio")) {
		/*
		 * Setup one handler for all GPIO interrupts. Actually setting
		 * the handler is needed only once, but doing it for every port
		 * is more robust and easier.
		 */
		irq_set_chained_handler(port->irq, mx2_gpio_irq_handler);
	} else {
		/* setup one handler for each entry */
		irq_set_chained_handler_and_data(port->irq,
						 mx3_gpio_irq_handler, port);
		if (port->irq_high > 0)
			/* setup handler for GPIO 16 to 31 */
			irq_set_chained_handler_and_data(port->irq_high,
							 mx3_gpio_irq_handler,
							 port);
	}

	err = bgpio_init(&port->gc, &pdev->dev, 4,
			 port->base + GPIO_PSR,
			 port->base + GPIO_DR, NULL,
			 port->base + GPIO_GDIR, NULL,
			 BGPIOF_READ_OUTPUT_REG_SET);
	if (err)
		goto out_bgio;

	port->gc.request = gpiochip_generic_request;
	port->gc.free = gpiochip_generic_free;
	port->gc.to_irq = mxc_gpio_to_irq;
	port->gc.base = (pdev->id < 0) ? of_alias_get_id(np, "gpio") * 32 :
					     pdev->id * 32;

	err = devm_gpiochip_add_data(&pdev->dev, &port->gc, port);
	if (err)
		goto out_bgio;

	irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, 32, numa_node_id());
	if (irq_base < 0) {
		err = irq_base;
		goto out_bgio;
	}

	port->domain = irq_domain_add_legacy(np, 32, irq_base, 0,
					     &irq_domain_simple_ops, NULL);
	if (!port->domain) {
		err = -ENODEV;
		goto out_bgio;
	}

	/* gpio-mxc can be a generic irq chip */
	err = mxc_gpio_init_gc(port, irq_base);
	if (err < 0)
		goto out_irqdomain_remove;

	list_add_tail(&port->node, &mxc_gpio_ports);

	platform_set_drvdata(pdev, port);

	return 0;

out_irqdomain_remove:
	irq_domain_remove(port->domain);
out_bgio:
	clk_disable_unprepare(port->clk);
	dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err);
	return err;
}

static void mxc_gpio_save_regs(struct mxc_gpio_port *port)
{
	if (!port->power_off)
		return;

	port->gpio_saved_reg.icr1 = readl(port->base + GPIO_ICR1);
	port->gpio_saved_reg.icr2 = readl(port->base + GPIO_ICR2);
	port->gpio_saved_reg.imr = readl(port->base + GPIO_IMR);
	port->gpio_saved_reg.gdir = readl(port->base + GPIO_GDIR);
	port->gpio_saved_reg.edge_sel = readl(port->base + GPIO_EDGE_SEL);
	port->gpio_saved_reg.dr = readl(port->base + GPIO_DR);
}

static void mxc_gpio_restore_regs(struct mxc_gpio_port *port)
{
	if (!port->power_off)
		return;

	writel(port->gpio_saved_reg.icr1, port->base + GPIO_ICR1);
	writel(port->gpio_saved_reg.icr2, port->base + GPIO_ICR2);
	writel(port->gpio_saved_reg.imr, port->base + GPIO_IMR);
	writel(port->gpio_saved_reg.gdir, port->base + GPIO_GDIR);
	writel(port->gpio_saved_reg.edge_sel, port->base + GPIO_EDGE_SEL);
	writel(port->gpio_saved_reg.dr, port->base + GPIO_DR);
}

static bool mxc_gpio_generic_config(struct mxc_gpio_port *port,
		unsigned int offset, unsigned long conf)
{
	struct device_node *np = port->dev->of_node;

	if (of_device_is_compatible(np, "fsl,imx8dxl-gpio") ||
	    of_device_is_compatible(np, "fsl,imx8qxp-gpio") ||
	    of_device_is_compatible(np, "fsl,imx8qm-gpio"))
		return (gpiochip_generic_config(&port->gc, offset, conf) == 0);

	return false;
}

static bool mxc_gpio_set_pad_wakeup(struct mxc_gpio_port *port, bool enable)
{
	unsigned long config;
	bool ret = false;
	int i, type;

	static const u32 pad_type_map[] = {
		IMX_SCU_WAKEUP_OFF,		/* 0 */
		IMX_SCU_WAKEUP_RISE_EDGE,	/* IRQ_TYPE_EDGE_RISING */
		IMX_SCU_WAKEUP_FALL_EDGE,	/* IRQ_TYPE_EDGE_FALLING */
		IMX_SCU_WAKEUP_FALL_EDGE,	/* IRQ_TYPE_EDGE_BOTH */
		IMX_SCU_WAKEUP_HIGH_LVL,	/* IRQ_TYPE_LEVEL_HIGH */
		IMX_SCU_WAKEUP_OFF,		/* 5 */
		IMX_SCU_WAKEUP_OFF,		/* 6 */
		IMX_SCU_WAKEUP_OFF,		/* 7 */
		IMX_SCU_WAKEUP_LOW_LVL,		/* IRQ_TYPE_LEVEL_LOW */
	};

	for (i = 0; i < 32; i++) {
		if ((port->wakeup_pads & (1 << i))) {
			type = port->pad_type[i];
			if (enable)
				config = pad_type_map[type];
			else
				config = IMX_SCU_WAKEUP_OFF;
			ret |= mxc_gpio_generic_config(port, i, config);
		}
	}

	return ret;
}

static int __maybe_unused mxc_gpio_noirq_suspend(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
	struct mxc_gpio_port *port = platform_get_drvdata(pdev);

	if (port->wakeup_pads > 0)
		port->is_pad_wakeup = mxc_gpio_set_pad_wakeup(port, true);

	return 0;
}

static int __maybe_unused mxc_gpio_noirq_resume(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
	struct mxc_gpio_port *port = platform_get_drvdata(pdev);

	if (port->wakeup_pads > 0)
		mxc_gpio_set_pad_wakeup(port, false);
	port->is_pad_wakeup = false;

	return 0;
}

static const struct dev_pm_ops mxc_gpio_dev_pm_ops = {
	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mxc_gpio_noirq_suspend, mxc_gpio_noirq_resume)
};

static int mxc_gpio_syscore_suspend(void)
{
	struct mxc_gpio_port *port;

	/* walk through all ports */
	list_for_each_entry(port, &mxc_gpio_ports, node) {
		mxc_gpio_save_regs(port);
		clk_disable_unprepare(port->clk);
	}

	return 0;
}

static void mxc_gpio_syscore_resume(void)
{
	struct mxc_gpio_port *port;
	int ret;

	/* walk through all ports */
	list_for_each_entry(port, &mxc_gpio_ports, node) {
		ret = clk_prepare_enable(port->clk);
		if (ret) {
			pr_err("mxc: failed to enable gpio clock %d\n", ret);
			return;
		}
		mxc_gpio_restore_regs(port);
	}
}

static struct syscore_ops mxc_gpio_syscore_ops = {
	.suspend = mxc_gpio_syscore_suspend,
	.resume = mxc_gpio_syscore_resume,
};

static struct platform_driver mxc_gpio_driver = {
	.driver		= {
		.name	= "gpio-mxc",
		.of_match_table = mxc_gpio_dt_ids,
		.suppress_bind_attrs = true,
		.pm = &mxc_gpio_dev_pm_ops,
	},
	.probe		= mxc_gpio_probe,
};

static int __init gpio_mxc_init(void)
{
	register_syscore_ops(&mxc_gpio_syscore_ops);

	return platform_driver_register(&mxc_gpio_driver);
}
subsys_initcall(gpio_mxc_init);

MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
MODULE_DESCRIPTION("i.MX GPIO Driver");
MODULE_LICENSE("GPL");