| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Daniel Vetter | 5122 | 43.70% | 72 | 25.17% |
| Maarten Lankhorst | 2033 | 17.35% | 40 | 13.99% |
| Ville Syrjälä | 484 | 4.13% | 25 | 8.74% |
| Boris Brezillon | 474 | 4.04% | 15 | 5.24% |
| Thierry Reding | 403 | 3.44% | 11 | 3.85% |
| Ander Conselvan de Oliveira | 401 | 3.42% | 4 | 1.40% |
| Gustavo Padovan | 270 | 2.30% | 3 | 1.05% |
| Matt Roper | 239 | 2.04% | 4 | 1.40% |
| Sean Paul | 226 | 1.93% | 11 | 3.85% |
| Thomas Zimmermann | 216 | 1.84% | 7 | 2.45% |
| Jose Abreu | 212 | 1.81% | 1 | 0.35% |
| Claudio Suarez | 203 | 1.73% | 2 | 0.70% |
| Andrey Grodzovsky | 153 | 1.31% | 2 | 0.70% |
| Igor Matheus Andrade Torrente | 119 | 1.02% | 1 | 0.35% |
| Rob Clark | 115 | 0.98% | 11 | 3.85% |
| Jyri Sarha | 109 | 0.93% | 1 | 0.35% |
| Simon Ser | 103 | 0.88% | 2 | 0.70% |
| Laurent Pinchart | 83 | 0.71% | 9 | 3.15% |
| Maxime Ripard | 80 | 0.68% | 10 | 3.50% |
| Noralf Trönnes | 72 | 0.61% | 3 | 1.05% |
| Liu Ying | 68 | 0.58% | 5 | 1.75% |
| Brian Starkey | 52 | 0.44% | 2 | 0.70% |
| Leo (Sunpeng) Li | 51 | 0.44% | 2 | 0.70% |
| Helen Mae Koike Fornazier | 32 | 0.27% | 1 | 0.35% |
| Stephen Chandler Paul | 31 | 0.26% | 3 | 1.05% |
| rodrigosiqueira | 30 | 0.26% | 2 | 0.70% |
| Mark Yao | 30 | 0.26% | 2 | 0.70% |
| Russell King | 28 | 0.24% | 1 | 0.35% |
| Peter Ujfalusi | 26 | 0.22% | 1 | 0.35% |
| Dhinakaran Pandiyan | 24 | 0.20% | 1 | 0.35% |
| Manasi D Navare | 23 | 0.20% | 1 | 0.35% |
| Philipp Zabel | 22 | 0.19% | 1 | 0.35% |
| Jérôme Glisse | 20 | 0.17% | 1 | 0.35% |
| Lionel Landwerlin | 19 | 0.16% | 1 | 0.35% |
| Brian Norris | 19 | 0.16% | 1 | 0.35% |
| Chris Wilson | 15 | 0.13% | 2 | 0.70% |
| Radhakrishna Sripada | 11 | 0.09% | 1 | 0.35% |
| Fabio M. De Francesco | 10 | 0.09% | 2 | 0.70% |
| Andrzej Hajda | 10 | 0.09% | 1 | 0.35% |
| Deepak Rawat | 9 | 0.08% | 1 | 0.35% |
| Jani Nikula | 8 | 0.07% | 1 | 0.35% |
| Shawn Guo | 7 | 0.06% | 1 | 0.35% |
| Dave Airlie | 7 | 0.06% | 1 | 0.35% |
| Inki Dae | 6 | 0.05% | 1 | 0.35% |
| Tvrtko A. Ursulin | 5 | 0.04% | 1 | 0.35% |
| Keith Packard | 5 | 0.04% | 1 | 0.35% |
| Linus Torvalds | 5 | 0.04% | 1 | 0.35% |
| Ben Skeggs | 5 | 0.04% | 1 | 0.35% |
| Sam Ravnborg | 5 | 0.04% | 1 | 0.35% |
| caihuoqing | 4 | 0.03% | 1 | 0.35% |
| Pan Bian | 3 | 0.03% | 1 | 0.35% |
| John Hunter | 3 | 0.03% | 1 | 0.35% |
| José Roberto de Souza | 2 | 0.02% | 1 | 0.35% |
| Dafna Hirschfeld | 2 | 0.02% | 1 | 0.35% |
| Linus Walleij | 1 | 0.01% | 1 | 0.35% |
| Tomasz Figa | 1 | 0.01% | 1 | 0.35% |
| Dan Carpenter | 1 | 0.01% | 1 | 0.35% |
| Jiapeng Chong | 1 | 0.01% | 1 | 0.35% |
| Kieran Bingham | 1 | 0.01% | 1 | 0.35% |
| Wei Yongjun | 1 | 0.01% | 1 | 0.35% |
| Total | 11720 | 286 |
/* * Copyright (C) 2014 Red Hat * Copyright (C) 2014 Intel Corp. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. * * Authors: * Rob Clark <robdclark@gmail.com> * Daniel Vetter <daniel.vetter@ffwll.ch> */ #include <linux/dma-fence.h> #include <linux/ktime.h> #include <drm/drm_atomic.h> #include <drm/drm_atomic_helper.h> #include <drm/drm_atomic_uapi.h> #include <drm/drm_blend.h> #include <drm/drm_bridge.h> #include <drm/drm_damage_helper.h> #include <drm/drm_device.h> #include <drm/drm_drv.h> #include <drm/drm_framebuffer.h> #include <drm/drm_gem_atomic_helper.h> #include <drm/drm_print.h> #include <drm/drm_self_refresh_helper.h> #include <drm/drm_vblank.h> #include <drm/drm_writeback.h> #include "drm_crtc_helper_internal.h" #include "drm_crtc_internal.h" /** * DOC: overview * * This helper library provides implementations of check and commit functions on * top of the CRTC modeset helper callbacks and the plane helper callbacks. It * also provides convenience implementations for the atomic state handling * callbacks for drivers which don't need to subclass the drm core structures to * add their own additional internal state. * * This library also provides default implementations for the check callback in * drm_atomic_helper_check() and for the commit callback with * drm_atomic_helper_commit(). But the individual stages and callbacks are * exposed to allow drivers to mix and match and e.g. use the plane helpers only * together with a driver private modeset implementation. * * This library also provides implementations for all the legacy driver * interfaces on top of the atomic interface. See drm_atomic_helper_set_config(), * drm_atomic_helper_disable_plane(), and the various functions to implement * set_property callbacks. New drivers must not implement these functions * themselves but must use the provided helpers. * * The atomic helper uses the same function table structures as all other * modesetting helpers. See the documentation for &struct drm_crtc_helper_funcs, * struct &drm_encoder_helper_funcs and &struct drm_connector_helper_funcs. It * also shares the &struct drm_plane_helper_funcs function table with the plane * helpers. */ static void drm_atomic_helper_plane_changed(struct drm_atomic_state *state, struct drm_plane_state *old_plane_state, struct drm_plane_state *plane_state, struct drm_plane *plane) { struct drm_crtc_state *crtc_state; if (old_plane_state->crtc) { crtc_state = drm_atomic_get_new_crtc_state(state, old_plane_state->crtc); if (WARN_ON(!crtc_state)) return; crtc_state->planes_changed = true; } if (plane_state->crtc) { crtc_state = drm_atomic_get_new_crtc_state(state, plane_state->crtc); if (WARN_ON(!crtc_state)) return; crtc_state->planes_changed = true; } } static int handle_conflicting_encoders(struct drm_atomic_state *state, bool disable_conflicting_encoders) { struct drm_connector_state *new_conn_state; struct drm_connector *connector; struct drm_connector_list_iter conn_iter; struct drm_encoder *encoder; unsigned int encoder_mask = 0; int i, ret = 0; /* * First loop, find all newly assigned encoders from the connectors * part of the state. If the same encoder is assigned to multiple * connectors bail out. */ for_each_new_connector_in_state(state, connector, new_conn_state, i) { const struct drm_connector_helper_funcs *funcs = connector->helper_private; struct drm_encoder *new_encoder; if (!new_conn_state->crtc) continue; if (funcs->atomic_best_encoder) new_encoder = funcs->atomic_best_encoder(connector, state); else if (funcs->best_encoder) new_encoder = funcs->best_encoder(connector); else new_encoder = drm_connector_get_single_encoder(connector); if (new_encoder) { if (encoder_mask & drm_encoder_mask(new_encoder)) { drm_dbg_atomic(connector->dev, "[ENCODER:%d:%s] on [CONNECTOR:%d:%s] already assigned\n", new_encoder->base.id, new_encoder->name, connector->base.id, connector->name); return -EINVAL; } encoder_mask |= drm_encoder_mask(new_encoder); } } if (!encoder_mask) return 0; /* * Second loop, iterate over all connectors not part of the state. * * If a conflicting encoder is found and disable_conflicting_encoders * is not set, an error is returned. Userspace can provide a solution * through the atomic ioctl. * * If the flag is set conflicting connectors are removed from the CRTC * and the CRTC is disabled if no encoder is left. This preserves * compatibility with the legacy set_config behavior. */ drm_connector_list_iter_begin(state->dev, &conn_iter); drm_for_each_connector_iter(connector, &conn_iter) { struct drm_crtc_state *crtc_state; if (drm_atomic_get_new_connector_state(state, connector)) continue; encoder = connector->state->best_encoder; if (!encoder || !(encoder_mask & drm_encoder_mask(encoder))) continue; if (!disable_conflicting_encoders) { drm_dbg_atomic(connector->dev, "[ENCODER:%d:%s] in use on [CRTC:%d:%s] by [CONNECTOR:%d:%s]\n", encoder->base.id, encoder->name, connector->state->crtc->base.id, connector->state->crtc->name, connector->base.id, connector->name); ret = -EINVAL; goto out; } new_conn_state = drm_atomic_get_connector_state(state, connector); if (IS_ERR(new_conn_state)) { ret = PTR_ERR(new_conn_state); goto out; } drm_dbg_atomic(connector->dev, "[ENCODER:%d:%s] in use on [CRTC:%d:%s], disabling [CONNECTOR:%d:%s]\n", encoder->base.id, encoder->name, new_conn_state->crtc->base.id, new_conn_state->crtc->name, connector->base.id, connector->name); crtc_state = drm_atomic_get_new_crtc_state(state, new_conn_state->crtc); ret = drm_atomic_set_crtc_for_connector(new_conn_state, NULL); if (ret) goto out; if (!crtc_state->connector_mask) { ret = drm_atomic_set_mode_prop_for_crtc(crtc_state, NULL); if (ret < 0) goto out; crtc_state->active = false; } } out: drm_connector_list_iter_end(&conn_iter); return ret; } static void set_best_encoder(struct drm_atomic_state *state, struct drm_connector_state *conn_state, struct drm_encoder *encoder) { struct drm_crtc_state *crtc_state; struct drm_crtc *crtc; if (conn_state->best_encoder) { /* Unset the encoder_mask in the old crtc state. */ crtc = conn_state->connector->state->crtc; /* A NULL crtc is an error here because we should have * duplicated a NULL best_encoder when crtc was NULL. * As an exception restoring duplicated atomic state * during resume is allowed, so don't warn when * best_encoder is equal to encoder we intend to set. */ WARN_ON(!crtc && encoder != conn_state->best_encoder); if (crtc) { crtc_state = drm_atomic_get_new_crtc_state(state, crtc); crtc_state->encoder_mask &= ~drm_encoder_mask(conn_state->best_encoder); } } if (encoder) { crtc = conn_state->crtc; WARN_ON(!crtc); if (crtc) { crtc_state = drm_atomic_get_new_crtc_state(state, crtc); crtc_state->encoder_mask |= drm_encoder_mask(encoder); } } conn_state->best_encoder = encoder; } static void steal_encoder(struct drm_atomic_state *state, struct drm_encoder *encoder) { struct drm_crtc_state *crtc_state; struct drm_connector *connector; struct drm_connector_state *old_connector_state, *new_connector_state; int i; for_each_oldnew_connector_in_state(state, connector, old_connector_state, new_connector_state, i) { struct drm_crtc *encoder_crtc; if (new_connector_state->best_encoder != encoder) continue; encoder_crtc = old_connector_state->crtc; drm_dbg_atomic(encoder->dev, "[ENCODER:%d:%s] in use on [CRTC:%d:%s], stealing it\n", encoder->base.id, encoder->name, encoder_crtc->base.id, encoder_crtc->name); set_best_encoder(state, new_connector_state, NULL); crtc_state = drm_atomic_get_new_crtc_state(state, encoder_crtc); crtc_state->connectors_changed = true; return; } } static int update_connector_routing(struct drm_atomic_state *state, struct drm_connector *connector, struct drm_connector_state *old_connector_state, struct drm_connector_state *new_connector_state) { const struct drm_connector_helper_funcs *funcs; struct drm_encoder *new_encoder; struct drm_crtc_state *crtc_state; drm_dbg_atomic(connector->dev, "Updating routing for [CONNECTOR:%d:%s]\n", connector->base.id, connector->name); if (old_connector_state->crtc != new_connector_state->crtc) { if (old_connector_state->crtc) { crtc_state = drm_atomic_get_new_crtc_state(state, old_connector_state->crtc); crtc_state->connectors_changed = true; } if (new_connector_state->crtc) { crtc_state = drm_atomic_get_new_crtc_state(state, new_connector_state->crtc); crtc_state->connectors_changed = true; } } if (!new_connector_state->crtc) { drm_dbg_atomic(connector->dev, "Disabling [CONNECTOR:%d:%s]\n", connector->base.id, connector->name); set_best_encoder(state, new_connector_state, NULL); return 0; } crtc_state = drm_atomic_get_new_crtc_state(state, new_connector_state->crtc); /* * For compatibility with legacy users, we want to make sure that * we allow DPMS On->Off modesets on unregistered connectors. Modesets * which would result in anything else must be considered invalid, to * avoid turning on new displays on dead connectors. * * Since the connector can be unregistered at any point during an * atomic check or commit, this is racy. But that's OK: all we care * about is ensuring that userspace can't do anything but shut off the * display on a connector that was destroyed after it's been notified, * not before. * * Additionally, we also want to ignore connector registration when * we're trying to restore an atomic state during system resume since * there's a chance the connector may have been destroyed during the * process, but it's better to ignore that then cause * drm_atomic_helper_resume() to fail. */ if (!state->duplicated && drm_connector_is_unregistered(connector) && crtc_state->active) { drm_dbg_atomic(connector->dev, "[CONNECTOR:%d:%s] is not registered\n", connector->base.id, connector->name); return -EINVAL; } funcs = connector->helper_private; if (funcs->atomic_best_encoder) new_encoder = funcs->atomic_best_encoder(connector, state); else if (funcs->best_encoder) new_encoder = funcs->best_encoder(connector); else new_encoder = drm_connector_get_single_encoder(connector); if (!new_encoder) { drm_dbg_atomic(connector->dev, "No suitable encoder found for [CONNECTOR:%d:%s]\n", connector->base.id, connector->name); return -EINVAL; } if (!drm_encoder_crtc_ok(new_encoder, new_connector_state->crtc)) { drm_dbg_atomic(connector->dev, "[ENCODER:%d:%s] incompatible with [CRTC:%d:%s]\n", new_encoder->base.id, new_encoder->name, new_connector_state->crtc->base.id, new_connector_state->crtc->name); return -EINVAL; } if (new_encoder == new_connector_state->best_encoder) { set_best_encoder(state, new_connector_state, new_encoder); drm_dbg_atomic(connector->dev, "[CONNECTOR:%d:%s] keeps [ENCODER:%d:%s], now on [CRTC:%d:%s]\n", connector->base.id, connector->name, new_encoder->base.id, new_encoder->name, new_connector_state->crtc->base.id, new_connector_state->crtc->name); return 0; } steal_encoder(state, new_encoder); set_best_encoder(state, new_connector_state, new_encoder); crtc_state->connectors_changed = true; drm_dbg_atomic(connector->dev, "[CONNECTOR:%d:%s] using [ENCODER:%d:%s] on [CRTC:%d:%s]\n", connector->base.id, connector->name, new_encoder->base.id, new_encoder->name, new_connector_state->crtc->base.id, new_connector_state->crtc->name); return 0; } static int mode_fixup(struct drm_atomic_state *state) { struct drm_crtc *crtc; struct drm_crtc_state *new_crtc_state; struct drm_connector *connector; struct drm_connector_state *new_conn_state; int i; int ret; for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) { if (!new_crtc_state->mode_changed && !new_crtc_state->connectors_changed) continue; drm_mode_copy(&new_crtc_state->adjusted_mode, &new_crtc_state->mode); } for_each_new_connector_in_state(state, connector, new_conn_state, i) { const struct drm_encoder_helper_funcs *funcs; struct drm_encoder *encoder; struct drm_bridge *bridge; WARN_ON(!!new_conn_state->best_encoder != !!new_conn_state->crtc); if (!new_conn_state->crtc || !new_conn_state->best_encoder) continue; new_crtc_state = drm_atomic_get_new_crtc_state(state, new_conn_state->crtc); /* * Each encoder has at most one connector (since we always steal * it away), so we won't call ->mode_fixup twice. */ encoder = new_conn_state->best_encoder; funcs = encoder->helper_private; bridge = drm_bridge_chain_get_first_bridge(encoder); ret = drm_atomic_bridge_chain_check(bridge, new_crtc_state, new_conn_state); if (ret) { drm_dbg_atomic(encoder->dev, "Bridge atomic check failed\n"); return ret; } if (funcs && funcs->atomic_check) { ret = funcs->atomic_check(encoder, new_crtc_state, new_conn_state); if (ret) { drm_dbg_atomic(encoder->dev, "[ENCODER:%d:%s] check failed\n", encoder->base.id, encoder->name); return ret; } } else if (funcs && funcs->mode_fixup) { ret = funcs->mode_fixup(encoder, &new_crtc_state->mode, &new_crtc_state->adjusted_mode); if (!ret) { drm_dbg_atomic(encoder->dev, "[ENCODER:%d:%s] fixup failed\n", encoder->base.id, encoder->name); return -EINVAL; } } } for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) { const struct drm_crtc_helper_funcs *funcs; if (!new_crtc_state->enable) continue; if (!new_crtc_state->mode_changed && !new_crtc_state->connectors_changed) continue; funcs = crtc->helper_private; if (!funcs || !funcs->mode_fixup) continue; ret = funcs->mode_fixup(crtc, &new_crtc_state->mode, &new_crtc_state->adjusted_mode); if (!ret) { drm_dbg_atomic(crtc->dev, "[CRTC:%d:%s] fixup failed\n", crtc->base.id, crtc->name); return -EINVAL; } } return 0; } static enum drm_mode_status mode_valid_path(struct drm_connector *connector, struct drm_encoder *encoder, struct drm_crtc *crtc, const struct drm_display_mode *mode) { struct drm_bridge *bridge; enum drm_mode_status ret; ret = drm_encoder_mode_valid(encoder, mode); if (ret != MODE_OK) { drm_dbg_atomic(encoder->dev, "[ENCODER:%d:%s] mode_valid() failed\n", encoder->base.id, encoder->name); return ret; } bridge = drm_bridge_chain_get_first_bridge(encoder); ret = drm_bridge_chain_mode_valid(bridge, &connector->display_info, mode); if (ret != MODE_OK) { drm_dbg_atomic(encoder->dev, "[BRIDGE] mode_valid() failed\n"); return ret; } ret = drm_crtc_mode_valid(crtc, mode); if (ret != MODE_OK) { drm_dbg_atomic(encoder->dev, "[CRTC:%d:%s] mode_valid() failed\n", crtc->base.id, crtc->name); return ret; } return ret; } static int mode_valid(struct drm_atomic_state *state) { struct drm_connector_state *conn_state; struct drm_connector *connector; int i; for_each_new_connector_in_state(state, connector, conn_state, i) { struct drm_encoder *encoder = conn_state->best_encoder; struct drm_crtc *crtc = conn_state->crtc; struct drm_crtc_state *crtc_state; enum drm_mode_status mode_status; const struct drm_display_mode *mode; if (!crtc || !encoder) continue; crtc_state = drm_atomic_get_new_crtc_state(state, crtc); if (!crtc_state) continue; if (!crtc_state->mode_changed && !crtc_state->connectors_changed) continue; mode = &crtc_state->mode; mode_status = mode_valid_path(connector, encoder, crtc, mode); if (mode_status != MODE_OK) return -EINVAL; } return 0; } /** * drm_atomic_helper_check_modeset - validate state object for modeset changes * @dev: DRM device * @state: the driver state object * * Check the state object to see if the requested state is physically possible. * This does all the CRTC and connector related computations for an atomic * update and adds any additional connectors needed for full modesets. It calls * the various per-object callbacks in the follow order: * * 1. &drm_connector_helper_funcs.atomic_best_encoder for determining the new encoder. * 2. &drm_connector_helper_funcs.atomic_check to validate the connector state. * 3. If it's determined a modeset is needed then all connectors on the affected * CRTC are added and &drm_connector_helper_funcs.atomic_check is run on them. * 4. &drm_encoder_helper_funcs.mode_valid, &drm_bridge_funcs.mode_valid and * &drm_crtc_helper_funcs.mode_valid are called on the affected components. * 5. &drm_bridge_funcs.mode_fixup is called on all encoder bridges. * 6. &drm_encoder_helper_funcs.atomic_check is called to validate any encoder state. * This function is only called when the encoder will be part of a configured CRTC, * it must not be used for implementing connector property validation. * If this function is NULL, &drm_atomic_encoder_helper_funcs.mode_fixup is called * instead. * 7. &drm_crtc_helper_funcs.mode_fixup is called last, to fix up the mode with CRTC constraints. * * &drm_crtc_state.mode_changed is set when the input mode is changed. * &drm_crtc_state.connectors_changed is set when a connector is added or * removed from the CRTC. &drm_crtc_state.active_changed is set when * &drm_crtc_state.active changes, which is used for DPMS. * &drm_crtc_state.no_vblank is set from the result of drm_dev_has_vblank(). * See also: drm_atomic_crtc_needs_modeset() * * IMPORTANT: * * Drivers which set &drm_crtc_state.mode_changed (e.g. in their * &drm_plane_helper_funcs.atomic_check hooks if a plane update can't be done * without a full modeset) _must_ call this function after that change. It is * permitted to call this function multiple times for the same update, e.g. * when the &drm_crtc_helper_funcs.atomic_check functions depend upon the * adjusted dotclock for fifo space allocation and watermark computation. * * RETURNS: * Zero for success or -errno */ int drm_atomic_helper_check_modeset(struct drm_device *dev, struct drm_atomic_state *state) { struct drm_crtc *crtc; struct drm_crtc_state *old_crtc_state, *new_crtc_state; struct drm_connector *connector; struct drm_connector_state *old_connector_state, *new_connector_state; int i, ret; unsigned int connectors_mask = 0; for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { bool has_connectors = !!new_crtc_state->connector_mask; WARN_ON(!drm_modeset_is_locked(&crtc->mutex)); if (!drm_mode_equal(&old_crtc_state->mode, &new_crtc_state->mode)) { drm_dbg_atomic(dev, "[CRTC:%d:%s] mode changed\n", crtc->base.id, crtc->name); new_crtc_state->mode_changed = true; } if (old_crtc_state->enable != new_crtc_state->enable) { drm_dbg_atomic(dev, "[CRTC:%d:%s] enable changed\n", crtc->base.id, crtc->name); /* * For clarity this assignment is done here, but * enable == 0 is only true when there are no * connectors and a NULL mode. * * The other way around is true as well. enable != 0 * implies that connectors are attached and a mode is set. */ new_crtc_state->mode_changed = true; new_crtc_state->connectors_changed = true; } if (old_crtc_state->active != new_crtc_state->active) { drm_dbg_atomic(dev, "[CRTC:%d:%s] active changed\n", crtc->base.id, crtc->name); new_crtc_state->active_changed = true; } if (new_crtc_state->enable != has_connectors) { drm_dbg_atomic(dev, "[CRTC:%d:%s] enabled/connectors mismatch\n", crtc->base.id, crtc->name); return -EINVAL; } if (drm_dev_has_vblank(dev)) new_crtc_state->no_vblank = false; else new_crtc_state->no_vblank = true; } ret = handle_conflicting_encoders(state, false); if (ret) return ret; for_each_oldnew_connector_in_state(state, connector, old_connector_state, new_connector_state, i) { const struct drm_connector_helper_funcs *funcs = connector->helper_private; WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); /* * This only sets crtc->connectors_changed for routing changes, * drivers must set crtc->connectors_changed themselves when * connector properties need to be updated. */ ret = update_connector_routing(state, connector, old_connector_state, new_connector_state); if (ret) return ret; if (old_connector_state->crtc) { new_crtc_state = drm_atomic_get_new_crtc_state(state, old_connector_state->crtc); if (old_connector_state->link_status != new_connector_state->link_status) new_crtc_state->connectors_changed = true; if (old_connector_state->max_requested_bpc != new_connector_state->max_requested_bpc) new_crtc_state->connectors_changed = true; } if (funcs->atomic_check) ret = funcs->atomic_check(connector, state); if (ret) { drm_dbg_atomic(dev, "[CONNECTOR:%d:%s] driver check failed\n", connector->base.id, connector->name); return ret; } connectors_mask |= BIT(i); } /* * After all the routing has been prepared we need to add in any * connector which is itself unchanged, but whose CRTC changes its * configuration. This must be done before calling mode_fixup in case a * crtc only changed its mode but has the same set of connectors. */ for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { if (!drm_atomic_crtc_needs_modeset(new_crtc_state)) continue; drm_dbg_atomic(dev, "[CRTC:%d:%s] needs all connectors, enable: %c, active: %c\n", crtc->base.id, crtc->name, new_crtc_state->enable ? 'y' : 'n', new_crtc_state->active ? 'y' : 'n'); ret = drm_atomic_add_affected_connectors(state, crtc); if (ret != 0) return ret; ret = drm_atomic_add_affected_planes(state, crtc); if (ret != 0) return ret; } /* * Iterate over all connectors again, to make sure atomic_check() * has been called on them when a modeset is forced. */ for_each_oldnew_connector_in_state(state, connector, old_connector_state, new_connector_state, i) { const struct drm_connector_helper_funcs *funcs = connector->helper_private; if (connectors_mask & BIT(i)) continue; if (funcs->atomic_check) ret = funcs->atomic_check(connector, state); if (ret) { drm_dbg_atomic(dev, "[CONNECTOR:%d:%s] driver check failed\n", connector->base.id, connector->name); return ret; } } /* * Iterate over all connectors again, and add all affected bridges to * the state. */ for_each_oldnew_connector_in_state(state, connector, old_connector_state, new_connector_state, i) { struct drm_encoder *encoder; encoder = old_connector_state->best_encoder; ret = drm_atomic_add_encoder_bridges(state, encoder); if (ret) return ret; encoder = new_connector_state->best_encoder; ret = drm_atomic_add_encoder_bridges(state, encoder); if (ret) return ret; } ret = mode_valid(state); if (ret) return ret; return mode_fixup(state); } EXPORT_SYMBOL(drm_atomic_helper_check_modeset); /** * drm_atomic_helper_check_wb_encoder_state() - Check writeback encoder state * @encoder: encoder state to check * @conn_state: connector state to check * * Checks if the writeback connector state is valid, and returns an error if it * isn't. * * RETURNS: * Zero for success or -errno */ int drm_atomic_helper_check_wb_encoder_state(struct drm_encoder *encoder, struct drm_connector_state *conn_state) { struct drm_writeback_job *wb_job = conn_state->writeback_job; struct drm_property_blob *pixel_format_blob; struct drm_framebuffer *fb; size_t i, nformats; u32 *formats; if (!wb_job || !wb_job->fb) return 0; pixel_format_blob = wb_job->connector->pixel_formats_blob_ptr; nformats = pixel_format_blob->length / sizeof(u32); formats = pixel_format_blob->data; fb = wb_job->fb; for (i = 0; i < nformats; i++) if (fb->format->format == formats[i]) return 0; drm_dbg_kms(encoder->dev, "Invalid pixel format %p4cc\n", &fb->format->format); return -EINVAL; } EXPORT_SYMBOL(drm_atomic_helper_check_wb_encoder_state); /** * drm_atomic_helper_check_plane_state() - Check plane state for validity * @plane_state: plane state to check * @crtc_state: CRTC state to check * @min_scale: minimum @src:@dest scaling factor in 16.16 fixed point * @max_scale: maximum @src:@dest scaling factor in 16.16 fixed point * @can_position: is it legal to position the plane such that it * doesn't cover the entire CRTC? This will generally * only be false for primary planes. * @can_update_disabled: can the plane be updated while the CRTC * is disabled? * * Checks that a desired plane update is valid, and updates various * bits of derived state (clipped coordinates etc.). Drivers that provide * their own plane handling rather than helper-provided implementations may * still wish to call this function to avoid duplication of error checking * code. * * RETURNS: * Zero if update appears valid, error code on failure */ int drm_atomic_helper_check_plane_state(struct drm_plane_state *plane_state, const struct drm_crtc_state *crtc_state, int min_scale, int max_scale, bool can_position, bool can_update_disabled) { struct drm_framebuffer *fb = plane_state->fb; struct drm_rect *src = &plane_state->src; struct drm_rect *dst = &plane_state->dst; unsigned int rotation = plane_state->rotation; struct drm_rect clip = {}; int hscale, vscale; WARN_ON(plane_state->crtc && plane_state->crtc != crtc_state->crtc); *src = drm_plane_state_src(plane_state); *dst = drm_plane_state_dest(plane_state); if (!fb) { plane_state->visible = false; return 0; } /* crtc should only be NULL when disabling (i.e., !fb) */ if (WARN_ON(!plane_state->crtc)) { plane_state->visible = false; return 0; } if (!crtc_state->enable && !can_update_disabled) { drm_dbg_kms(plane_state->plane->dev, "Cannot update plane of a disabled CRTC.\n"); return -EINVAL; } drm_rect_rotate(src, fb->width << 16, fb->height << 16, rotation); /* Check scaling */ hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale); vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale); if (hscale < 0 || vscale < 0) { drm_dbg_kms(plane_state->plane->dev, "Invalid scaling of plane\n"); drm_rect_debug_print("src: ", &plane_state->src, true); drm_rect_debug_print("dst: ", &plane_state->dst, false); return -ERANGE; } if (crtc_state->enable) drm_mode_get_hv_timing(&crtc_state->mode, &clip.x2, &clip.y2); plane_state->visible = drm_rect_clip_scaled(src, dst, &clip); drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16, rotation); if (!plane_state->visible) /* * Plane isn't visible; some drivers can handle this * so we just return success here. Drivers that can't * (including those that use the primary plane helper's * update function) will return an error from their * update_plane handler. */ return 0; if (!can_position && !drm_rect_equals(dst, &clip)) { drm_dbg_kms(plane_state->plane->dev, "Plane must cover entire CRTC\n"); drm_rect_debug_print("dst: ", dst, false); drm_rect_debug_print("clip: ", &clip, false); return -EINVAL; } return 0; } EXPORT_SYMBOL(drm_atomic_helper_check_plane_state); /** * drm_atomic_helper_check_crtc_primary_plane() - Check CRTC state for primary plane * @crtc_state: CRTC state to check * * Checks that a CRTC has at least one primary plane attached to it, which is * a requirement on some hardware. Note that this only involves the CRTC side * of the test. To test if the primary plane is visible or if it can be updated * without the CRTC being enabled, use drm_atomic_helper_check_plane_state() in * the plane's atomic check. * * RETURNS: * 0 if a primary plane is attached to the CRTC, or an error code otherwise */ int drm_atomic_helper_check_crtc_primary_plane(struct drm_crtc_state *crtc_state) { struct drm_crtc *crtc = crtc_state->crtc; struct drm_device *dev = crtc->dev; struct drm_plane *plane; /* needs at least one primary plane to be enabled */ drm_for_each_plane_mask(plane, dev, crtc_state->plane_mask) { if (plane->type == DRM_PLANE_TYPE_PRIMARY) return 0; } drm_dbg_atomic(dev, "[CRTC:%d:%s] primary plane missing\n", crtc->base.id, crtc->name); return -EINVAL; } EXPORT_SYMBOL(drm_atomic_helper_check_crtc_primary_plane); /** * drm_atomic_helper_check_planes - validate state object for planes changes * @dev: DRM device * @state: the driver state object * * Check the state object to see if the requested state is physically possible. * This does all the plane update related checks using by calling into the * &drm_crtc_helper_funcs.atomic_check and &drm_plane_helper_funcs.atomic_check * hooks provided by the driver. * * It also sets &drm_crtc_state.planes_changed to indicate that a CRTC has * updated planes. * * RETURNS: * Zero for success or -errno */ int drm_atomic_helper_check_planes(struct drm_device *dev, struct drm_atomic_state *state) { struct drm_crtc *crtc; struct drm_crtc_state *new_crtc_state; struct drm_plane *plane; struct drm_plane_state *new_plane_state, *old_plane_state; int i, ret = 0; for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, i) { const struct drm_plane_helper_funcs *funcs; WARN_ON(!drm_modeset_is_locked(&plane->mutex)); funcs = plane->helper_private; drm_atomic_helper_plane_changed(state, old_plane_state, new_plane_state, plane); drm_atomic_helper_check_plane_damage(state, new_plane_state); if (!funcs || !funcs->atomic_check) continue; ret = funcs->atomic_check(plane, state); if (ret) { drm_dbg_atomic(plane->dev, "[PLANE:%d:%s] atomic driver check failed\n", plane->base.id, plane->name); return ret; } } for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) { const struct drm_crtc_helper_funcs *funcs; funcs = crtc->helper_private; if (!funcs || !funcs->atomic_check) continue; ret = funcs->atomic_check(crtc, state); if (ret) { drm_dbg_atomic(crtc->dev, "[CRTC:%d:%s] atomic driver check failed\n", crtc->base.id, crtc->name); return ret; } } return ret; } EXPORT_SYMBOL(drm_atomic_helper_check_planes); /** * drm_atomic_helper_check - validate state object * @dev: DRM device * @state: the driver state object * * Check the state object to see if the requested state is physically possible. * Only CRTCs and planes have check callbacks, so for any additional (global) * checking that a driver needs it can simply wrap that around this function. * Drivers without such needs can directly use this as their * &drm_mode_config_funcs.atomic_check callback. * * This just wraps the two parts of the state checking for planes and modeset * state in the default order: First it calls drm_atomic_helper_check_modeset() * and then drm_atomic_helper_check_planes(). The assumption is that the * @drm_plane_helper_funcs.atomic_check and @drm_crtc_helper_funcs.atomic_check * functions depend upon an updated adjusted_mode.clock to e.g. properly compute * watermarks. * * Note that zpos normalization will add all enable planes to the state which * might not desired for some drivers. * For example enable/disable of a cursor plane which have fixed zpos value * would trigger all other enabled planes to be forced to the state change. * * RETURNS: * Zero for success or -errno */ int drm_atomic_helper_check(struct drm_device *dev, struct drm_atomic_state *state) { int ret; ret = drm_atomic_helper_check_modeset(dev, state); if (ret) return ret; if (dev->mode_config.normalize_zpos) { ret = drm_atomic_normalize_zpos(dev, state); if (ret) return ret; } ret = drm_atomic_helper_check_planes(dev, state); if (ret) return ret; if (state->legacy_cursor_update) state->async_update = !drm_atomic_helper_async_check(dev, state); drm_self_refresh_helper_alter_state(state); return ret; } EXPORT_SYMBOL(drm_atomic_helper_check); static bool crtc_needs_disable(struct drm_crtc_state *old_state, struct drm_crtc_state *new_state) { /* * No new_state means the CRTC is off, so the only criteria is whether * it's currently active or in self refresh mode. */ if (!new_state) return drm_atomic_crtc_effectively_active(old_state); /* * We need to disable bridge(s) and CRTC if we're transitioning out of * self-refresh and changing CRTCs at the same time, because the * bridge tracks self-refresh status via CRTC state. */ if (old_state->self_refresh_active && old_state->crtc != new_state->crtc) return true; /* * We also need to run through the crtc_funcs->disable() function if * the CRTC is currently on, if it's transitioning to self refresh * mode, or if it's in self refresh mode and needs to be fully * disabled. */ return old_state->active || (old_state->self_refresh_active && !new_state->active) || new_state->self_refresh_active; } static void disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state) { struct drm_connector *connector; struct drm_connector_state *old_conn_state, *new_conn_state; struct drm_crtc *crtc; struct drm_crtc_state *old_crtc_state, *new_crtc_state; int i; for_each_oldnew_connector_in_state(old_state, connector, old_conn_state, new_conn_state, i) { const struct drm_encoder_helper_funcs *funcs; struct drm_encoder *encoder; struct drm_bridge *bridge; /* * Shut down everything that's in the changeset and currently * still on. So need to check the old, saved state. */ if (!old_conn_state->crtc) continue; old_crtc_state = drm_atomic_get_old_crtc_state(old_state, old_conn_state->crtc); if (new_conn_state->crtc) new_crtc_state = drm_atomic_get_new_crtc_state( old_state, new_conn_state->crtc); else new_crtc_state = NULL; if (!crtc_needs_disable(old_crtc_state, new_crtc_state) || !drm_atomic_crtc_needs_modeset(old_conn_state->crtc->state)) continue; encoder = old_conn_state->best_encoder; /* We shouldn't get this far if we didn't previously have * an encoder.. but WARN_ON() rather than explode. */ if (WARN_ON(!encoder)) continue; funcs = encoder->helper_private; drm_dbg_atomic(dev, "disabling [ENCODER:%d:%s]\n", encoder->base.id, encoder->name); /* * Each encoder has at most one connector (since we always steal * it away), so we won't call disable hooks twice. */ bridge = drm_bridge_chain_get_first_bridge(encoder); drm_atomic_bridge_chain_disable(bridge, old_state); /* Right function depends upon target state. */ if (funcs) { if (funcs->atomic_disable) funcs->atomic_disable(encoder, old_state); else if (new_conn_state->crtc && funcs->prepare) funcs->prepare(encoder); else if (funcs->disable) funcs->disable(encoder); else if (funcs->dpms) funcs->dpms(encoder, DRM_MODE_DPMS_OFF); } drm_atomic_bridge_chain_post_disable(bridge, old_state); } for_each_oldnew_crtc_in_state(old_state, crtc, old_crtc_state, new_crtc_state, i) { const struct drm_crtc_helper_funcs *funcs; int ret; /* Shut down everything that needs a full modeset. */ if (!drm_atomic_crtc_needs_modeset(new_crtc_state)) continue; if (!crtc_needs_disable(old_crtc_state, new_crtc_state)) continue; funcs = crtc->helper_private; drm_dbg_atomic(dev, "disabling [CRTC:%d:%s]\n", crtc->base.id, crtc->name); /* Right function depends upon target state. */ if (new_crtc_state->enable && funcs->prepare) funcs->prepare(crtc); else if (funcs->atomic_disable) funcs->atomic_disable(crtc, old_state); else if (funcs->disable) funcs->disable(crtc); else if (funcs->dpms) funcs->dpms(crtc, DRM_MODE_DPMS_OFF); if (!drm_dev_has_vblank(dev)) continue; ret = drm_crtc_vblank_get(crtc); WARN_ONCE(ret != -EINVAL, "driver forgot to call drm_crtc_vblank_off()\n"); if (ret == 0) drm_crtc_vblank_put(crtc); } } /** * drm_atomic_helper_update_legacy_modeset_state - update legacy modeset state * @dev: DRM device * @old_state: atomic state object with old state structures * * This function updates all the various legacy modeset state pointers in * connectors, encoders and CRTCs. * * Drivers can use this for building their own atomic commit if they don't have * a pure helper-based modeset implementation. * * Since these updates are not synchronized with lockings, only code paths * called from &drm_mode_config_helper_funcs.atomic_commit_tail can look at the * legacy state filled out by this helper. Defacto this means this helper and * the legacy state pointers are only really useful for transitioning an * existing driver to the atomic world. */ void drm_atomic_helper_update_legacy_modeset_state(struct drm_device *dev, struct drm_atomic_state *old_state) { struct drm_connector *connector; struct drm_connector_state *old_conn_state, *new_conn_state; struct drm_crtc *crtc; struct drm_crtc_state *new_crtc_state; int i; /* clear out existing links and update dpms */ for_each_oldnew_connector_in_state(old_state, connector, old_conn_state, new_conn_state, i) { if (connector->encoder) { WARN_ON(!connector->encoder->crtc); connector->encoder->crtc = NULL; connector->encoder = NULL; } crtc = new_conn_state->crtc; if ((!crtc && old_conn_state->crtc) || (crtc && drm_atomic_crtc_needs_modeset(crtc->state))) { int mode = DRM_MODE_DPMS_OFF; if (crtc && crtc->state->active) mode = DRM_MODE_DPMS_ON; connector->dpms = mode; } } /* set new links */ for_each_new_connector_in_state(old_state, connector, new_conn_state, i) { if (!new_conn_state->crtc) continue; if (WARN_ON(!new_conn_state->best_encoder)) continue; connector->encoder = new_conn_state->best_encoder; connector->encoder->crtc = new_conn_state->crtc; } /* set legacy state in the crtc structure */ for_each_new_crtc_in_state(old_state, crtc, new_crtc_state, i) { struct drm_plane *primary = crtc->primary; struct drm_plane_state *new_plane_state; crtc->mode = new_crtc_state->mode; crtc->enabled = new_crtc_state->enable; new_plane_state = drm_atomic_get_new_plane_state(old_state, primary); if (new_plane_state && new_plane_state->crtc == crtc) { crtc->x = new_plane_state->src_x >> 16; crtc->y = new_plane_state->src_y >> 16; } } } EXPORT_SYMBOL(drm_atomic_helper_update_legacy_modeset_state); /** * drm_atomic_helper_calc_timestamping_constants - update vblank timestamping constants * @state: atomic state object * * Updates the timestamping constants used for precise vblank timestamps * by calling drm_calc_timestamping_constants() for all enabled crtcs in @state. */ void drm_atomic_helper_calc_timestamping_constants(struct drm_atomic_state *state) { struct drm_crtc_state *new_crtc_state; struct drm_crtc *crtc; int i; for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) { if (new_crtc_state->enable) drm_calc_timestamping_constants(crtc, &new_crtc_state->adjusted_mode); } } EXPORT_SYMBOL(drm_atomic_helper_calc_timestamping_constants); static void crtc_set_mode(struct drm_device *dev, struct drm_atomic_state *old_state) { struct drm_crtc *crtc; struct drm_crtc_state *new_crtc_state; struct drm_connector *connector; struct drm_connector_state *new_conn_state; int i; for_each_new_crtc_in_state(old_state, crtc, new_crtc_state, i) { const struct drm_crtc_helper_funcs *funcs; if (!new_crtc_state->mode_changed) continue; funcs = crtc->helper_private; if (new_crtc_state->enable && funcs->mode_set_nofb) { drm_dbg_atomic(dev, "modeset on [CRTC:%d:%s]\n", crtc->base.id, crtc->name); funcs->mode_set_nofb(crtc); } } for_each_new_connector_in_state(old_state, connector, new_conn_state, i) { const struct drm_encoder_helper_funcs *funcs; struct drm_encoder *encoder; struct drm_display_mode *mode, *adjusted_mode; struct drm_bridge *bridge; if (!new_conn_state->best_encoder) continue; encoder = new_conn_state->best_encoder; funcs = encoder->helper_private; new_crtc_state = new_conn_state->crtc->state; mode = &new_crtc_state->mode; adjusted_mode = &new_crtc_state->adjusted_mode; if (!new_crtc_state->mode_changed) continue; drm_dbg_atomic(dev, "modeset on [ENCODER:%d:%s]\n", encoder->base.id, encoder->name); /* * Each encoder has at most one connector (since we always steal * it away), so we won't call mode_set hooks twice. */ if (funcs && funcs->atomic_mode_set) { funcs->atomic_mode_set(encoder, new_crtc_state, new_conn_state); } else if (funcs && funcs->mode_set) { funcs->mode_set(encoder, mode, adjusted_mode); } bridge = drm_bridge_chain_get_first_bridge(encoder); drm_bridge_chain_mode_set(bridge, mode, adjusted_mode); } } /** * drm_atomic_helper_commit_modeset_disables - modeset commit to disable outputs * @dev: DRM device * @old_state: atomic state object with old state structures * * This function shuts down all the outputs that need to be shut down and * prepares them (if required) with the new mode. * * For compatibility with legacy CRTC helpers this should be called before * drm_atomic_helper_commit_planes(), which is what the default commit function * does. But drivers with different needs can group the modeset commits together * and do the plane commits at the end. This is useful for drivers doing runtime * PM since planes updates then only happen when the CRTC is actually enabled. */ void drm_atomic_helper_commit_modeset_disables(struct drm_device *dev, struct drm_atomic_state *old_state) { disable_outputs(dev, old_state); drm_atomic_helper_update_legacy_modeset_state(dev, old_state); drm_atomic_helper_calc_timestamping_constants(old_state); crtc_set_mode(dev, old_state); } EXPORT_SYMBOL(drm_atomic_helper_commit_modeset_disables); static void drm_atomic_helper_commit_writebacks(struct drm_device *dev, struct drm_atomic_state *old_state) { struct drm_connector *connector; struct drm_connector_state *new_conn_state; int i; for_each_new_connector_in_state(old_state, connector, new_conn_state, i) { const struct drm_connector_helper_funcs *funcs; funcs = connector->helper_private; if (!funcs->atomic_commit) continue; if (new_conn_state->writeback_job && new_conn_state->writeback_job->fb) { WARN_ON(connector->connector_type != DRM_MODE_CONNECTOR_WRITEBACK); funcs->atomic_commit(connector, old_state); } } } /** * drm_atomic_helper_commit_modeset_enables - modeset commit to enable outputs * @dev: DRM device * @old_state: atomic state object with old state structures * * This function enables all the outputs with the new configuration which had to * be turned off for the update. * * For compatibility with legacy CRTC helpers this should be called after * drm_atomic_helper_commit_planes(), which is what the default commit function * does. But drivers with different needs can group the modeset commits together * and do the plane commits at the end. This is useful for drivers doing runtime * PM since planes updates then only happen when the CRTC is actually enabled. */ void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *old_state) { struct drm_crtc *crtc; struct drm_crtc_state *old_crtc_state; struct drm_crtc_state *new_crtc_state; struct drm_connector *connector; struct drm_connector_state *new_conn_state; int i; for_each_oldnew_crtc_in_state(old_state, crtc, old_crtc_state, new_crtc_state, i) { const struct drm_crtc_helper_funcs *funcs; /* Need to filter out CRTCs where only planes change. */ if (!drm_atomic_crtc_needs_modeset(new_crtc_state)) continue; if (!new_crtc_state->active) continue; funcs = crtc->helper_private; if (new_crtc_state->enable) { drm_dbg_atomic(dev, "enabling [CRTC:%d:%s]\n", crtc->base.id, crtc->name); if (funcs->atomic_enable) funcs->atomic_enable(crtc, old_state); else if (funcs->commit) funcs->commit(crtc); } } for_each_new_connector_in_state(old_state, connector, new_conn_state, i) { const struct drm_encoder_helper_funcs *funcs; struct drm_encoder *encoder; struct drm_bridge *bridge; if (!new_conn_state->best_encoder) continue; if (!new_conn_state->crtc->state->active || !drm_atomic_crtc_needs_modeset(new_conn_state->crtc->state)) continue; encoder = new_conn_state->best_encoder; funcs = encoder->helper_private; drm_dbg_atomic(dev, "enabling [ENCODER:%d:%s]\n", encoder->base.id, encoder->name); /* * Each encoder has at most one connector (since we always steal * it away), so we won't call enable hooks twice. */ bridge = drm_bridge_chain_get_first_bridge(encoder); drm_atomic_bridge_chain_pre_enable(bridge, old_state); if (funcs) { if (funcs->atomic_enable) funcs->atomic_enable(encoder, old_state); else if (funcs->enable) funcs->enable(encoder); else if (funcs->commit) funcs->commit(encoder); } drm_atomic_bridge_chain_enable(bridge, old_state); } drm_atomic_helper_commit_writebacks(dev, old_state); } EXPORT_SYMBOL(drm_atomic_helper_commit_modeset_enables); /** * drm_atomic_helper_wait_for_fences - wait for fences stashed in plane state * @dev: DRM device * @state: atomic state object with old state structures * @pre_swap: If true, do an interruptible wait, and @state is the new state. * Otherwise @state is the old state. * * For implicit sync, driver should fish the exclusive fence out from the * incoming fb's and stash it in the drm_plane_state. This is called after * drm_atomic_helper_swap_state() so it uses the current plane state (and * just uses the atomic state to find the changed planes) * * Note that @pre_swap is needed since the point where we block for fences moves * around depending upon whether an atomic commit is blocking or * non-blocking. For non-blocking commit all waiting needs to happen after * drm_atomic_helper_swap_state() is called, but for blocking commits we want * to wait **before** we do anything that can't be easily rolled back. That is * before we call drm_atomic_helper_swap_state(). * * Returns zero if success or < 0 if dma_fence_wait() fails. */ int drm_atomic_helper_wait_for_fences(struct drm_device *dev, struct drm_atomic_state *state, bool pre_swap) { struct drm_plane *plane; struct drm_plane_state *new_plane_state; int i, ret; for_each_new_plane_in_state(state, plane, new_plane_state, i) { if (!new_plane_state->fence) continue; WARN_ON(!new_plane_state->fb); /* * If waiting for fences pre-swap (ie: nonblock), userspace can * still interrupt the operation. Instead of blocking until the * timer expires, make the wait interruptible. */ ret = dma_fence_wait(new_plane_state->fence, pre_swap); if (ret) return ret; dma_fence_put(new_plane_state->fence); new_plane_state->fence = NULL; } return 0; } EXPORT_SYMBOL(drm_atomic_helper_wait_for_fences); /** * drm_atomic_helper_wait_for_vblanks - wait for vblank on CRTCs * @dev: DRM device * @old_state: atomic state object with old state structures * * Helper to, after atomic commit, wait for vblanks on all affected * CRTCs (ie. before cleaning up old framebuffers using * drm_atomic_helper_cleanup_planes()). It will only wait on CRTCs where the * framebuffers have actually changed to optimize for the legacy cursor and * plane update use-case. * * Drivers using the nonblocking commit tracking support initialized by calling * drm_atomic_helper_setup_commit() should look at * drm_atomic_helper_wait_for_flip_done() as an alternative. */ void drm_atomic_helper_wait_for_vblanks(struct drm_device *dev, struct drm_atomic_state *old_state) { struct drm_crtc *crtc; struct drm_crtc_state *old_crtc_state, *new_crtc_state; int i, ret; unsigned int crtc_mask = 0; /* * Legacy cursor ioctls are completely unsynced, and userspace * relies on that (by doing tons of cursor updates). */ if (old_state->legacy_cursor_update) return; for_each_oldnew_crtc_in_state(old_state, crtc, old_crtc_state, new_crtc_state, i) { if (!new_crtc_state->active) continue; ret = drm_crtc_vblank_get(crtc); if (ret != 0) continue; crtc_mask |= drm_crtc_mask(crtc); old_state->crtcs[i].last_vblank_count = drm_crtc_vblank_count(crtc); } for_each_old_crtc_in_state(old_state, crtc, old_crtc_state, i) { if (!(crtc_mask & drm_crtc_mask(crtc))) continue; ret = wait_event_timeout(dev->vblank[i].queue, old_state->crtcs[i].last_vblank_count != drm_crtc_vblank_count(crtc), msecs_to_jiffies(100)); WARN(!ret, "[CRTC:%d:%s] vblank wait timed out\n", crtc->base.id, crtc->name); drm_crtc_vblank_put(crtc); } } EXPORT_SYMBOL(drm_atomic_helper_wait_for_vblanks); /** * drm_atomic_helper_wait_for_flip_done - wait for all page flips to be done * @dev: DRM device * @old_state: atomic state object with old state structures * * Helper to, after atomic commit, wait for page flips on all affected * crtcs (ie. before cleaning up old framebuffers using * drm_atomic_helper_cleanup_planes()). Compared to * drm_atomic_helper_wait_for_vblanks() this waits for the completion on all * CRTCs, assuming that cursors-only updates are signalling their completion * immediately (or using a different path). * * This requires that drivers use the nonblocking commit tracking support * initialized using drm_atomic_helper_setup_commit(). */ void drm_atomic_helper_wait_for_flip_done(struct drm_device *dev, struct drm_atomic_state *old_state) { struct drm_crtc *crtc; int i; for (i = 0; i < dev->mode_config.num_crtc; i++) { struct drm_crtc_commit *commit = old_state->crtcs[i].commit; int ret; crtc = old_state->crtcs[i].ptr; if (!crtc || !commit) continue; ret = wait_for_completion_timeout(&commit->flip_done, 10 * HZ); if (ret == 0) drm_err(dev, "[CRTC:%d:%s] flip_done timed out\n", crtc->base.id, crtc->name); } if (old_state->fake_commit) complete_all(&old_state->fake_commit->flip_done); } EXPORT_SYMBOL(drm_atomic_helper_wait_for_flip_done); /** * drm_atomic_helper_commit_tail - commit atomic update to hardware * @old_state: atomic state object with old state structures * * This is the default implementation for the * &drm_mode_config_helper_funcs.atomic_commit_tail hook, for drivers * that do not support runtime_pm or do not need the CRTC to be * enabled to perform a commit. Otherwise, see * drm_atomic_helper_commit_tail_rpm(). * * Note that the default ordering of how the various stages are called is to * match the legacy modeset helper library closest. */ void drm_atomic_helper_commit_tail(struct drm_atomic_state *old_state) { struct drm_device *dev = old_state->dev; drm_atomic_helper_commit_modeset_disables(dev, old_state); drm_atomic_helper_commit_planes(dev, old_state, 0); drm_atomic_helper_commit_modeset_enables(dev, old_state); drm_atomic_helper_fake_vblank(old_state); drm_atomic_helper_commit_hw_done(old_state); drm_atomic_helper_wait_for_vblanks(dev, old_state); drm_atomic_helper_cleanup_planes(dev, old_state); } EXPORT_SYMBOL(drm_atomic_helper_commit_tail); /** * drm_atomic_helper_commit_tail_rpm - commit atomic update to hardware * @old_state: new modeset state to be committed * * This is an alternative implementation for the * &drm_mode_config_helper_funcs.atomic_commit_tail hook, for drivers * that support runtime_pm or need the CRTC to be enabled to perform a * commit. Otherwise, one should use the default implementation * drm_atomic_helper_commit_tail(). */ void drm_atomic_helper_commit_tail_rpm(struct drm_atomic_state *old_state) { struct drm_device *dev = old_state->dev; drm_atomic_helper_commit_modeset_disables(dev, old_state); drm_atomic_helper_commit_modeset_enables(dev, old_state); drm_atomic_helper_commit_planes(dev, old_state, DRM_PLANE_COMMIT_ACTIVE_ONLY); drm_atomic_helper_fake_vblank(old_state); drm_atomic_helper_commit_hw_done(old_state); drm_atomic_helper_wait_for_vblanks(dev, old_state); drm_atomic_helper_cleanup_planes(dev, old_state); } EXPORT_SYMBOL(drm_atomic_helper_commit_tail_rpm); static void commit_tail(struct drm_atomic_state *old_state) { struct drm_device *dev = old_state->dev; const struct drm_mode_config_helper_funcs *funcs; struct drm_crtc_state *new_crtc_state; struct drm_crtc *crtc; ktime_t start; s64 commit_time_ms; unsigned int i, new_self_refresh_mask = 0; funcs = dev->mode_config.helper_private; /* * We're measuring the _entire_ commit, so the time will vary depending * on how many fences and objects are involved. For the purposes of self * refresh, this is desirable since it'll give us an idea of how * congested things are. This will inform our decision on how often we * should enter self refresh after idle. * * These times will be averaged out in the self refresh helpers to avoid * overreacting over one outlier frame */ start = ktime_get(); drm_atomic_helper_wait_for_fences(dev, old_state, false); drm_atomic_helper_wait_for_dependencies(old_state); /* * We cannot safely access new_crtc_state after * drm_atomic_helper_commit_hw_done() so figure out which crtc's have * self-refresh active beforehand: */ for_each_new_crtc_in_state(old_state, crtc, new_crtc_state, i) if (new_crtc_state->self_refresh_active) new_self_refresh_mask |= BIT(i); if (funcs && funcs->atomic_commit_tail) funcs->atomic_commit_tail(old_state); else drm_atomic_helper_commit_tail(old_state); commit_time_ms = ktime_ms_delta(ktime_get(), start); if (commit_time_ms > 0) drm_self_refresh_helper_update_avg_times(old_state, (unsigned long)commit_time_ms, new_self_refresh_mask); drm_atomic_helper_commit_cleanup_done(old_state); drm_atomic_state_put(old_state); } static void commit_work(struct work_struct *work) { struct drm_atomic_state *state = container_of(work, struct drm_atomic_state, commit_work); commit_tail(state); } /** * drm_atomic_helper_async_check - check if state can be committed asynchronously * @dev: DRM device * @state: the driver state object * * This helper will check if it is possible to commit the state asynchronously. * Async commits are not supposed to swap the states like normal sync commits * but just do in-place changes on the current state. * * It will return 0 if the commit can happen in an asynchronous fashion or error * if not. Note that error just mean it can't be committed asynchronously, if it * fails the commit should be treated like a normal synchronous commit. */ int drm_atomic_helper_async_check(struct drm_device *dev, struct drm_atomic_state *state) { struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; struct drm_plane *plane = NULL; struct drm_plane_state *old_plane_state = NULL; struct drm_plane_state *new_plane_state = NULL; const struct drm_plane_helper_funcs *funcs; int i, ret, n_planes = 0; for_each_new_crtc_in_state(state, crtc, crtc_state, i) { if (drm_atomic_crtc_needs_modeset(crtc_state)) return -EINVAL; } for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, i) n_planes++; /* FIXME: we support only single plane updates for now */ if (n_planes != 1) { drm_dbg_atomic(dev, "only single plane async updates are supported\n"); return -EINVAL; } if (!new_plane_state->crtc || old_plane_state->crtc != new_plane_state->crtc) { drm_dbg_atomic(dev, "[PLANE:%d:%s] async update cannot change CRTC\n", plane->base.id, plane->name); return -EINVAL; } funcs = plane->helper_private; if (!funcs->atomic_async_update) { drm_dbg_atomic(dev, "[PLANE:%d:%s] driver does not support async updates\n", plane->base.id, plane->name); return -EINVAL; } if (new_plane_state->fence) { drm_dbg_atomic(dev, "[PLANE:%d:%s] missing fence for async update\n", plane->base.id, plane->name); return -EINVAL; } /* * Don't do an async update if there is an outstanding commit modifying * the plane. This prevents our async update's changes from getting * overridden by a previous synchronous update's state. */ if (old_plane_state->commit && !try_wait_for_completion(&old_plane_state->commit->hw_done)) { drm_dbg_atomic(dev, "[PLANE:%d:%s] inflight previous commit preventing async commit\n", plane->base.id, plane->name); return -EBUSY; } ret = funcs->atomic_async_check(plane, state); if (ret != 0) drm_dbg_atomic(dev, "[PLANE:%d:%s] driver async check failed\n", plane->base.id, plane->name); return ret; } EXPORT_SYMBOL(drm_atomic_helper_async_check); /** * drm_atomic_helper_async_commit - commit state asynchronously * @dev: DRM device * @state: the driver state object * * This function commits a state asynchronously, i.e., not vblank * synchronized. It should be used on a state only when * drm_atomic_async_check() succeeds. Async commits are not supposed to swap * the states like normal sync commits, but just do in-place changes on the * current state. * * TODO: Implement full swap instead of doing in-place changes. */ void drm_atomic_helper_async_commit(struct drm_device *dev, struct drm_atomic_state *state) { struct drm_plane *plane; struct drm_plane_state *plane_state; const struct drm_plane_helper_funcs *funcs; int i; for_each_new_plane_in_state(state, plane, plane_state, i) { struct drm_framebuffer *new_fb = plane_state->fb; struct drm_framebuffer *old_fb = plane->state->fb; funcs = plane->helper_private; funcs->atomic_async_update(plane, state); /* * ->atomic_async_update() is supposed to update the * plane->state in-place, make sure at least common * properties have been properly updated. */ WARN_ON_ONCE(plane->state->fb != new_fb); WARN_ON_ONCE(plane->state->crtc_x != plane_state->crtc_x); WARN_ON_ONCE(plane->state->crtc_y != plane_state->crtc_y); WARN_ON_ONCE(plane->state->src_x != plane_state->src_x); WARN_ON_ONCE(plane->state->src_y != plane_state->src_y); /* * Make sure the FBs have been swapped so that cleanups in the * new_state performs a cleanup in the old FB. */ WARN_ON_ONCE(plane_state->fb != old_fb); } } EXPORT_SYMBOL(drm_atomic_helper_async_commit); /** * drm_atomic_helper_commit - commit validated state object * @dev: DRM device * @state: the driver state object * @nonblock: whether nonblocking behavior is requested. * * This function commits a with drm_atomic_helper_check() pre-validated state * object. This can still fail when e.g. the framebuffer reservation fails. This * function implements nonblocking commits, using * drm_atomic_helper_setup_commit() and related functions. * * Committing the actual hardware state is done through the * &drm_mode_config_helper_funcs.atomic_commit_tail callback, or its default * implementation drm_atomic_helper_commit_tail(). * * RETURNS: * Zero for success or -errno. */ int drm_atomic_helper_commit(struct drm_device *dev, struct drm_atomic_state *state, bool nonblock) { int ret; if (state->async_update) { ret = drm_atomic_helper_prepare_planes(dev, state); if (ret) return ret; drm_atomic_helper_async_commit(dev, state); drm_atomic_helper_cleanup_planes(dev, state); return 0; } ret = drm_atomic_helper_setup_commit(state, nonblock); if (ret) return ret; INIT_WORK(&state->commit_work, commit_work); ret = drm_atomic_helper_prepare_planes(dev, state); if (ret) return ret; if (!nonblock) { ret = drm_atomic_helper_wait_for_fences(dev, state, true); if (ret) goto err; } /* * This is the point of no return - everything below never fails except * when the hw goes bonghits. Which means we can commit the new state on * the software side now. */ ret = drm_atomic_helper_swap_state(state, true); if (ret) goto err; /* * Everything below can be run asynchronously without the need to grab * any modeset locks at all under one condition: It must be guaranteed * that the asynchronous work has either been cancelled (if the driver * supports it, which at least requires that the framebuffers get * cleaned up with drm_atomic_helper_cleanup_planes()) or completed * before the new state gets committed on the software side with * drm_atomic_helper_swap_state(). * * This scheme allows new atomic state updates to be prepared and * checked in parallel to the asynchronous completion of the previous * update. Which is important since compositors need to figure out the * composition of the next frame right after having submitted the * current layout. * * NOTE: Commit work has multiple phases, first hardware commit, then * cleanup. We want them to overlap, hence need system_unbound_wq to * make sure work items don't artificially stall on each another. */ drm_atomic_state_get(state); if (nonblock) queue_work(system_unbound_wq, &state->commit_work); else commit_tail(state); return 0; err: drm_atomic_helper_cleanup_planes(dev, state); return ret; } EXPORT_SYMBOL(drm_atomic_helper_commit); /** * DOC: implementing nonblocking commit * * Nonblocking atomic commits should use struct &drm_crtc_commit to sequence * different operations against each another. Locks, especially struct * &drm_modeset_lock, should not be held in worker threads or any other * asynchronous context used to commit the hardware state. * * drm_atomic_helper_commit() implements the recommended sequence for * nonblocking commits, using drm_atomic_helper_setup_commit() internally: * * 1. Run drm_atomic_helper_prepare_planes(). Since this can fail and we * need to propagate out of memory/VRAM errors to userspace, it must be called * synchronously. * * 2. Synchronize with any outstanding nonblocking commit worker threads which * might be affected by the new state update. This is handled by * drm_atomic_helper_setup_commit(). * * Asynchronous workers need to have sufficient parallelism to be able to run * different atomic commits on different CRTCs in parallel. The simplest way to * achieve this is by running them on the &system_unbound_wq work queue. Note * that drivers are not required to split up atomic commits and run an * individual commit in parallel - userspace is supposed to do that if it cares. * But it might be beneficial to do that for modesets, since those necessarily * must be done as one global operation, and enabling or disabling a CRTC can * take a long time. But even that is not required. * * IMPORTANT: A &drm_atomic_state update for multiple CRTCs is sequenced * against all CRTCs therein. Therefore for atomic state updates which only flip * planes the driver must not get the struct &drm_crtc_state of unrelated CRTCs * in its atomic check code: This would prevent committing of atomic updates to * multiple CRTCs in parallel. In general, adding additional state structures * should be avoided as much as possible, because this reduces parallelism in * (nonblocking) commits, both due to locking and due to commit sequencing * requirements. * * 3. The software state is updated synchronously with * drm_atomic_helper_swap_state(). Doing this under the protection of all modeset * locks means concurrent callers never see inconsistent state. Note that commit * workers do not hold any locks; their access is only coordinated through * ordering. If workers would access state only through the pointers in the * free-standing state objects (currently not the case for any driver) then even * multiple pending commits could be in-flight at the same time. * * 4. Schedule a work item to do all subsequent steps, using the split-out * commit helpers: a) pre-plane commit b) plane commit c) post-plane commit and * then cleaning up the framebuffers after the old framebuffer is no longer * being displayed. The scheduled work should synchronize against other workers * using the &drm_crtc_commit infrastructure as needed. See * drm_atomic_helper_setup_commit() for more details. */ static int stall_checks(struct drm_crtc *crtc, bool nonblock) { struct drm_crtc_commit *commit, *stall_commit = NULL; bool completed = true; int i; long ret = 0; spin_lock(&crtc->commit_lock); i = 0; list_for_each_entry(commit, &crtc->commit_list, commit_entry) { if (i == 0) { completed = try_wait_for_completion(&commit->flip_done); /* * Userspace is not allowed to get ahead of the previous * commit with nonblocking ones. */ if (!completed && nonblock) { spin_unlock(&crtc->commit_lock); drm_dbg_atomic(crtc->dev, "[CRTC:%d:%s] busy with a previous commit\n", crtc->base.id, crtc->name); return -EBUSY; } } else if (i == 1) { stall_commit = drm_crtc_commit_get(commit); break; } i++; } spin_unlock(&crtc->commit_lock); if (!stall_commit) return 0; /* We don't want to let commits get ahead of cleanup work too much, * stalling on 2nd previous commit means triple-buffer won't ever stall. */ ret = wait_for_completion_interruptible_timeout(&stall_commit->cleanup_done, 10*HZ); if (ret == 0) drm_err(crtc->dev, "[CRTC:%d:%s] cleanup_done timed out\n", crtc->base.id, crtc->name); drm_crtc_commit_put(stall_commit); return ret < 0 ? ret : 0; } static void release_crtc_commit(struct completion *completion) { struct drm_crtc_commit *commit = container_of(completion, typeof(*commit), flip_done); drm_crtc_commit_put(commit); } static void init_commit(struct drm_crtc_commit *commit, struct drm_crtc *crtc) { init_completion(&commit->flip_done); init_completion(&commit->hw_done); init_completion(&commit->cleanup_done); INIT_LIST_HEAD(&commit->commit_entry); kref_init(&commit->ref); commit->crtc = crtc; } static struct drm_crtc_commit * crtc_or_fake_commit(struct drm_atomic_state *state, struct drm_crtc *crtc) { if (crtc) { struct drm_crtc_state *new_crtc_state; new_crtc_state = drm_atomic_get_new_crtc_state(state, crtc); return new_crtc_state->commit; } if (!state->fake_commit) { state->fake_commit = kzalloc(sizeof(*state->fake_commit), GFP_KERNEL); if (!state->fake_commit) return NULL; init_commit(state->fake_commit, NULL); } return state->fake_commit; } /** * drm_atomic_helper_setup_commit - setup possibly nonblocking commit * @state: new modeset state to be committed * @nonblock: whether nonblocking behavior is requested. * * This function prepares @state to be used by the atomic helper's support for * nonblocking commits. Drivers using the nonblocking commit infrastructure * should always call this function from their * &drm_mode_config_funcs.atomic_commit hook. * * Drivers that need to extend the commit setup to private objects can use the * &drm_mode_config_helper_funcs.atomic_commit_setup hook. * * To be able to use this support drivers need to use a few more helper * functions. drm_atomic_helper_wait_for_dependencies() must be called before * actually committing the hardware state, and for nonblocking commits this call * must be placed in the async worker. See also drm_atomic_helper_swap_state() * and its stall parameter, for when a driver's commit hooks look at the * &drm_crtc.state, &drm_plane.state or &drm_connector.state pointer directly. * * Completion of the hardware commit step must be signalled using * drm_atomic_helper_commit_hw_done(). After this step the driver is not allowed * to read or change any permanent software or hardware modeset state. The only * exception is state protected by other means than &drm_modeset_lock locks. * Only the free standing @state with pointers to the old state structures can * be inspected, e.g. to clean up old buffers using * drm_atomic_helper_cleanup_planes(). * * At the very end, before cleaning up @state drivers must call * drm_atomic_helper_commit_cleanup_done(). * * This is all implemented by in drm_atomic_helper_commit(), giving drivers a * complete and easy-to-use default implementation of the atomic_commit() hook. * * The tracking of asynchronously executed and still pending commits is done * using the core structure &drm_crtc_commit. * * By default there's no need to clean up resources allocated by this function * explicitly: drm_atomic_state_default_clear() will take care of that * automatically. * * Returns: * * 0 on success. -EBUSY when userspace schedules nonblocking commits too fast, * -ENOMEM on allocation failures and -EINTR when a signal is pending. */ int drm_atomic_helper_setup_commit(struct drm_atomic_state *state, bool nonblock) { struct drm_crtc *crtc; struct drm_crtc_state *old_crtc_state, *new_crtc_state; struct drm_connector *conn; struct drm_connector_state *old_conn_state, *new_conn_state; struct drm_plane *plane; struct drm_plane_state *old_plane_state, *new_plane_state; struct drm_crtc_commit *commit; const struct drm_mode_config_helper_funcs *funcs; int i, ret; funcs = state->dev->mode_config.helper_private; for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { commit = kzalloc(sizeof(*commit), GFP_KERNEL); if (!commit) return -ENOMEM; init_commit(commit, crtc); new_crtc_state->commit = commit; ret = stall_checks(crtc, nonblock); if (ret) return ret; /* * Drivers only send out events when at least either current or * new CRTC state is active. Complete right away if everything * stays off. */ if (!old_crtc_state->active && !new_crtc_state->active) { complete_all(&commit->flip_done); continue; } /* Legacy cursor updates are fully unsynced. */ if (state->legacy_cursor_update) { complete_all(&commit->flip_done); continue; } if (!new_crtc_state->event) { commit->event = kzalloc(sizeof(*commit->event), GFP_KERNEL); if (!commit->event) return -ENOMEM; new_crtc_state->event = commit->event; } new_crtc_state->event->base.completion = &commit->flip_done; new_crtc_state->event->base.completion_release = release_crtc_commit; drm_crtc_commit_get(commit); commit->abort_completion = true; state->crtcs[i].commit = commit; drm_crtc_commit_get(commit); } for_each_oldnew_connector_in_state(state, conn, old_conn_state, new_conn_state, i) { /* * Userspace is not allowed to get ahead of the previous * commit with nonblocking ones. */ if (nonblock && old_conn_state->commit && !try_wait_for_completion(&old_conn_state->commit->flip_done)) { drm_dbg_atomic(conn->dev, "[CONNECTOR:%d:%s] busy with a previous commit\n", conn->base.id, conn->name); return -EBUSY; } /* Always track connectors explicitly for e.g. link retraining. */ commit = crtc_or_fake_commit(state, new_conn_state->crtc ?: old_conn_state->crtc); if (!commit) return -ENOMEM; new_conn_state->commit = drm_crtc_commit_get(commit); } for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, i) { /* * Userspace is not allowed to get ahead of the previous * commit with nonblocking ones. */ if (nonblock && old_plane_state->commit && !try_wait_for_completion(&old_plane_state->commit->flip_done)) { drm_dbg_atomic(plane->dev, "[PLANE:%d:%s] busy with a previous commit\n", plane->base.id, plane->name); return -EBUSY; } /* Always track planes explicitly for async pageflip support. */ commit = crtc_or_fake_commit(state, new_plane_state->crtc ?: old_plane_state->crtc); if (!commit) return -ENOMEM; new_plane_state->commit = drm_crtc_commit_get(commit); } if (funcs && funcs->atomic_commit_setup) return funcs->atomic_commit_setup(state); return 0; } EXPORT_SYMBOL(drm_atomic_helper_setup_commit); /** * drm_atomic_helper_wait_for_dependencies - wait for required preceeding commits * @old_state: atomic state object with old state structures * * This function waits for all preceeding commits that touch the same CRTC as * @old_state to both be committed to the hardware (as signalled by * drm_atomic_helper_commit_hw_done()) and executed by the hardware (as signalled * by calling drm_crtc_send_vblank_event() on the &drm_crtc_state.event). * * This is part of the atomic helper support for nonblocking commits, see * drm_atomic_helper_setup_commit() for an overview. */ void drm_atomic_helper_wait_for_dependencies(struct drm_atomic_state *old_state) { struct drm_crtc *crtc; struct drm_crtc_state *old_crtc_state; struct drm_plane *plane; struct drm_plane_state *old_plane_state; struct drm_connector *conn; struct drm_connector_state *old_conn_state; int i; long ret; for_each_old_crtc_in_state(old_state, crtc, old_crtc_state, i) { ret = drm_crtc_commit_wait(old_crtc_state->commit); if (ret) drm_err(crtc->dev, "[CRTC:%d:%s] commit wait timed out\n", crtc->base.id, crtc->name); } for_each_old_connector_in_state(old_state, conn, old_conn_state, i) { ret = drm_crtc_commit_wait(old_conn_state->commit); if (ret) drm_err(conn->dev, "[CONNECTOR:%d:%s] commit wait timed out\n", conn->base.id, conn->name); } for_each_old_plane_in_state(old_state, plane, old_plane_state, i) { ret = drm_crtc_commit_wait(old_plane_state->commit); if (ret) drm_err(plane->dev, "[PLANE:%d:%s] commit wait timed out\n", plane->base.id, plane->name); } } EXPORT_SYMBOL(drm_atomic_helper_wait_for_dependencies); /** * drm_atomic_helper_fake_vblank - fake VBLANK events if needed * @old_state: atomic state object with old state structures * * This function walks all CRTCs and fakes VBLANK events on those with * &drm_crtc_state.no_vblank set to true and &drm_crtc_state.event != NULL. * The primary use of this function is writeback connectors working in oneshot * mode and faking VBLANK events. In this case they only fake the VBLANK event * when a job is queued, and any change to the pipeline that does not touch the * connector is leading to timeouts when calling * drm_atomic_helper_wait_for_vblanks() or * drm_atomic_helper_wait_for_flip_done(). In addition to writeback * connectors, this function can also fake VBLANK events for CRTCs without * VBLANK interrupt. * * This is part of the atomic helper support for nonblocking commits, see * drm_atomic_helper_setup_commit() for an overview. */ void drm_atomic_helper_fake_vblank(struct drm_atomic_state *old_state) { struct drm_crtc_state *new_crtc_state; struct drm_crtc *crtc; int i; for_each_new_crtc_in_state(old_state, crtc, new_crtc_state, i) { unsigned long flags; if (!new_crtc_state->no_vblank) continue; spin_lock_irqsave(&old_state->dev->event_lock, flags); if (new_crtc_state->event) { drm_crtc_send_vblank_event(crtc, new_crtc_state->event); new_crtc_state->event = NULL; } spin_unlock_irqrestore(&old_state->dev->event_lock, flags); } } EXPORT_SYMBOL(drm_atomic_helper_fake_vblank); /** * drm_atomic_helper_commit_hw_done - setup possible nonblocking commit * @old_state: atomic state object with old state structures * * This function is used to signal completion of the hardware commit step. After * this step the driver is not allowed to read or change any permanent software * or hardware modeset state. The only exception is state protected by other * means than &drm_modeset_lock locks. * * Drivers should try to postpone any expensive or delayed cleanup work after * this function is called. * * This is part of the atomic helper support for nonblocking commits, see * drm_atomic_helper_setup_commit() for an overview. */ void drm_atomic_helper_commit_hw_done(struct drm_atomic_state *old_state) { struct drm_crtc *crtc; struct drm_crtc_state *old_crtc_state, *new_crtc_state; struct drm_crtc_commit *commit; int i; for_each_oldnew_crtc_in_state(old_state, crtc, old_crtc_state, new_crtc_state, i) { commit = new_crtc_state->commit; if (!commit) continue; /* * copy new_crtc_state->commit to old_crtc_state->commit, * it's unsafe to touch new_crtc_state after hw_done, * but we still need to do so in cleanup_done(). */ if (old_crtc_state->commit) drm_crtc_commit_put(old_crtc_state->commit); old_crtc_state->commit = drm_crtc_commit_get(commit); /* backend must have consumed any event by now */ WARN_ON(new_crtc_state->event); complete_all(&commit->hw_done); } if (old_state->fake_commit) { complete_all(&old_state->fake_commit->hw_done); complete_all(&old_state->fake_commit->flip_done); } } EXPORT_SYMBOL(drm_atomic_helper_commit_hw_done); /** * drm_atomic_helper_commit_cleanup_done - signal completion of commit * @old_state: atomic state object with old state structures * * This signals completion of the atomic update @old_state, including any * cleanup work. If used, it must be called right before calling * drm_atomic_state_put(). * * This is part of the atomic helper support for nonblocking commits, see * drm_atomic_helper_setup_commit() for an overview. */ void drm_atomic_helper_commit_cleanup_done(struct drm_atomic_state *old_state) { struct drm_crtc *crtc; struct drm_crtc_state *old_crtc_state; struct drm_crtc_commit *commit; int i; for_each_old_crtc_in_state(old_state, crtc, old_crtc_state, i) { commit = old_crtc_state->commit; if (WARN_ON(!commit)) continue; complete_all(&commit->cleanup_done); WARN_ON(!try_wait_for_completion(&commit->hw_done)); spin_lock(&crtc->commit_lock); list_del(&commit->commit_entry); spin_unlock(&crtc->commit_lock); } if (old_state->fake_commit) { complete_all(&old_state->fake_commit->cleanup_done); WARN_ON(!try_wait_for_completion(&old_state->fake_commit->hw_done)); } } EXPORT_SYMBOL(drm_atomic_helper_commit_cleanup_done); /** * drm_atomic_helper_prepare_planes - prepare plane resources before commit * @dev: DRM device * @state: atomic state object with new state structures * * This function prepares plane state, specifically framebuffers, for the new * configuration, by calling &drm_plane_helper_funcs.prepare_fb. If any failure * is encountered this function will call &drm_plane_helper_funcs.cleanup_fb on * any already successfully prepared framebuffer. * * Returns: * 0 on success, negative error code on failure. */ int drm_atomic_helper_prepare_planes(struct drm_device *dev, struct drm_atomic_state *state) { struct drm_connector *connector; struct drm_connector_state *new_conn_state; struct drm_plane *plane; struct drm_plane_state *new_plane_state; int ret, i, j; for_each_new_connector_in_state(state, connector, new_conn_state, i) { if (!new_conn_state->writeback_job) continue; ret = drm_writeback_prepare_job(new_conn_state->writeback_job); if (ret < 0) return ret; } for_each_new_plane_in_state(state, plane, new_plane_state, i) { const struct drm_plane_helper_funcs *funcs; funcs = plane->helper_private; if (funcs->prepare_fb) { ret = funcs->prepare_fb(plane, new_plane_state); if (ret) goto fail_prepare_fb; } else { WARN_ON_ONCE(funcs->cleanup_fb); if (!drm_core_check_feature(dev, DRIVER_GEM)) continue; ret = drm_gem_plane_helper_prepare_fb(plane, new_plane_state); if (ret) goto fail_prepare_fb; } } for_each_new_plane_in_state(state, plane, new_plane_state, i) { const struct drm_plane_helper_funcs *funcs = plane->helper_private; if (funcs->begin_fb_access) { ret = funcs->begin_fb_access(plane, new_plane_state); if (ret) goto fail_begin_fb_access; } } return 0; fail_begin_fb_access: for_each_new_plane_in_state(state, plane, new_plane_state, j) { const struct drm_plane_helper_funcs *funcs = plane->helper_private; if (j >= i) continue; if (funcs->end_fb_access) funcs->end_fb_access(plane, new_plane_state); } i = j; /* set i to upper limit to cleanup all planes */ fail_prepare_fb: for_each_new_plane_in_state(state, plane, new_plane_state, j) { const struct drm_plane_helper_funcs *funcs; if (j >= i) continue; funcs = plane->helper_private; if (funcs->cleanup_fb) funcs->cleanup_fb(plane, new_plane_state); } return ret; } EXPORT_SYMBOL(drm_atomic_helper_prepare_planes); static bool plane_crtc_active(const struct drm_plane_state *state) { return state->crtc && state->crtc->state->active; } /** * drm_atomic_helper_commit_planes - commit plane state * @dev: DRM device * @old_state: atomic state object with old state structures * @flags: flags for committing plane state * * This function commits the new plane state using the plane and atomic helper * functions for planes and CRTCs. It assumes that the atomic state has already * been pushed into the relevant object state pointers, since this step can no * longer fail. * * It still requires the global state object @old_state to know which planes and * crtcs need to be updated though. * * Note that this function does all plane updates across all CRTCs in one step. * If the hardware can't support this approach look at * drm_atomic_helper_commit_planes_on_crtc() instead. * * Plane parameters can be updated by applications while the associated CRTC is * disabled. The DRM/KMS core will store the parameters in the plane state, * which will be available to the driver when the CRTC is turned on. As a result * most drivers don't need to be immediately notified of plane updates for a * disabled CRTC. * * Unless otherwise needed, drivers are advised to set the ACTIVE_ONLY flag in * @flags in order not to receive plane update notifications related to a * disabled CRTC. This avoids the need to manually ignore plane updates in * driver code when the driver and/or hardware can't or just don't need to deal * with updates on disabled CRTCs, for example when supporting runtime PM. * * Drivers may set the NO_DISABLE_AFTER_MODESET flag in @flags if the relevant * display controllers require to disable a CRTC's planes when the CRTC is * disabled. This function would skip the &drm_plane_helper_funcs.atomic_disable * call for a plane if the CRTC of the old plane state needs a modesetting * operation. Of course, the drivers need to disable the planes in their CRTC * disable callbacks since no one else would do that. * * The drm_atomic_helper_commit() default implementation doesn't set the * ACTIVE_ONLY flag to most closely match the behaviour of the legacy helpers. * This should not be copied blindly by drivers. */ void drm_atomic_helper_commit_planes(struct drm_device *dev, struct drm_atomic_state *old_state, uint32_t flags) { struct drm_crtc *crtc; struct drm_crtc_state *old_crtc_state, *new_crtc_state; struct drm_plane *plane; struct drm_plane_state *old_plane_state, *new_plane_state; int i; bool active_only = flags & DRM_PLANE_COMMIT_ACTIVE_ONLY; bool no_disable = flags & DRM_PLANE_COMMIT_NO_DISABLE_AFTER_MODESET; for_each_oldnew_crtc_in_state(old_state, crtc, old_crtc_state, new_crtc_state, i) { const struct drm_crtc_helper_funcs *funcs; funcs = crtc->helper_private; if (!funcs || !funcs->atomic_begin) continue; if (active_only && !new_crtc_state->active) continue; funcs->atomic_begin(crtc, old_state); } for_each_oldnew_plane_in_state(old_state, plane, old_plane_state, new_plane_state, i) { const struct drm_plane_helper_funcs *funcs; bool disabling; funcs = plane->helper_private; if (!funcs) continue; disabling = drm_atomic_plane_disabling(old_plane_state, new_plane_state); if (active_only) { /* * Skip planes related to inactive CRTCs. If the plane * is enabled use the state of the current CRTC. If the * plane is being disabled use the state of the old * CRTC to avoid skipping planes being disabled on an * active CRTC. */ if (!disabling && !plane_crtc_active(new_plane_state)) continue; if (disabling && !plane_crtc_active(old_plane_state)) continue; } /* * Special-case disabling the plane if drivers support it. */ if (disabling && funcs->atomic_disable) { struct drm_crtc_state *crtc_state; crtc_state = old_plane_state->crtc->state; if (drm_atomic_crtc_needs_modeset(crtc_state) && no_disable) continue; funcs->atomic_disable(plane, old_state); } else if (new_plane_state->crtc || disabling) { funcs->atomic_update(plane, old_state); } } for_each_oldnew_crtc_in_state(old_state, crtc, old_crtc_state, new_crtc_state, i) { const struct drm_crtc_helper_funcs *funcs; funcs = crtc->helper_private; if (!funcs || !funcs->atomic_flush) continue; if (active_only && !new_crtc_state->active) continue; funcs->atomic_flush(crtc, old_state); } } EXPORT_SYMBOL(drm_atomic_helper_commit_planes); /** * drm_atomic_helper_commit_planes_on_crtc - commit plane state for a CRTC * @old_crtc_state: atomic state object with the old CRTC state * * This function commits the new plane state using the plane and atomic helper * functions for planes on the specific CRTC. It assumes that the atomic state * has already been pushed into the relevant object state pointers, since this * step can no longer fail. * * This function is useful when plane updates should be done CRTC-by-CRTC * instead of one global step like drm_atomic_helper_commit_planes() does. * * This function can only be savely used when planes are not allowed to move * between different CRTCs because this function doesn't handle inter-CRTC * dependencies. Callers need to ensure that either no such dependencies exist, * resolve them through ordering of commit calls or through some other means. */ void drm_atomic_helper_commit_planes_on_crtc(struct drm_crtc_state *old_crtc_state) { const struct drm_crtc_helper_funcs *crtc_funcs; struct drm_crtc *crtc = old_crtc_state->crtc; struct drm_atomic_state *old_state = old_crtc_state->state; struct drm_crtc_state *new_crtc_state = drm_atomic_get_new_crtc_state(old_state, crtc); struct drm_plane *plane; unsigned int plane_mask; plane_mask = old_crtc_state->plane_mask; plane_mask |= new_crtc_state->plane_mask; crtc_funcs = crtc->helper_private; if (crtc_funcs && crtc_funcs->atomic_begin) crtc_funcs->atomic_begin(crtc, old_state); drm_for_each_plane_mask(plane, crtc->dev, plane_mask) { struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(old_state, plane); struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(old_state, plane); const struct drm_plane_helper_funcs *plane_funcs; plane_funcs = plane->helper_private; if (!old_plane_state || !plane_funcs) continue; WARN_ON(new_plane_state->crtc && new_plane_state->crtc != crtc); if (drm_atomic_plane_disabling(old_plane_state, new_plane_state) && plane_funcs->atomic_disable) plane_funcs->atomic_disable(plane, old_state); else if (new_plane_state->crtc || drm_atomic_plane_disabling(old_plane_state, new_plane_state)) plane_funcs->atomic_update(plane, old_state); } if (crtc_funcs && crtc_funcs->atomic_flush) crtc_funcs->atomic_flush(crtc, old_state); } EXPORT_SYMBOL(drm_atomic_helper_commit_planes_on_crtc); /** * drm_atomic_helper_disable_planes_on_crtc - helper to disable CRTC's planes * @old_crtc_state: atomic state object with the old CRTC state * @atomic: if set, synchronize with CRTC's atomic_begin/flush hooks * * Disables all planes associated with the given CRTC. This can be * used for instance in the CRTC helper atomic_disable callback to disable * all planes. * * If the atomic-parameter is set the function calls the CRTC's * atomic_begin hook before and atomic_flush hook after disabling the * planes. * * It is a bug to call this function without having implemented the * &drm_plane_helper_funcs.atomic_disable plane hook. */ void drm_atomic_helper_disable_planes_on_crtc(struct drm_crtc_state *old_crtc_state, bool atomic) { struct drm_crtc *crtc = old_crtc_state->crtc; const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; struct drm_plane *plane; if (atomic && crtc_funcs && crtc_funcs->atomic_begin) crtc_funcs->atomic_begin(crtc, NULL); drm_atomic_crtc_state_for_each_plane(plane, old_crtc_state) { const struct drm_plane_helper_funcs *plane_funcs = plane->helper_private; if (!plane_funcs) continue; WARN_ON(!plane_funcs->atomic_disable); if (plane_funcs->atomic_disable) plane_funcs->atomic_disable(plane, NULL); } if (atomic && crtc_funcs && crtc_funcs->atomic_flush) crtc_funcs->atomic_flush(crtc, NULL); } EXPORT_SYMBOL(drm_atomic_helper_disable_planes_on_crtc); /** * drm_atomic_helper_cleanup_planes - cleanup plane resources after commit * @dev: DRM device * @old_state: atomic state object with old state structures * * This function cleans up plane state, specifically framebuffers, from the old * configuration. Hence the old configuration must be perserved in @old_state to * be able to call this function. * * This function must also be called on the new state when the atomic update * fails at any point after calling drm_atomic_helper_prepare_planes(). */ void drm_atomic_helper_cleanup_planes(struct drm_device *dev, struct drm_atomic_state *old_state) { struct drm_plane *plane; struct drm_plane_state *old_plane_state, *new_plane_state; int i; for_each_oldnew_plane_in_state(old_state, plane, old_plane_state, new_plane_state, i) { const struct drm_plane_helper_funcs *funcs = plane->helper_private; if (funcs->end_fb_access) funcs->end_fb_access(plane, new_plane_state); } for_each_oldnew_plane_in_state(old_state, plane, old_plane_state, new_plane_state, i) { const struct drm_plane_helper_funcs *funcs; struct drm_plane_state *plane_state; /* * This might be called before swapping when commit is aborted, * in which case we have to cleanup the new state. */ if (old_plane_state == plane->state) plane_state = new_plane_state; else plane_state = old_plane_state; funcs = plane->helper_private; if (funcs->cleanup_fb) funcs->cleanup_fb(plane, plane_state); } } EXPORT_SYMBOL(drm_atomic_helper_cleanup_planes); /** * drm_atomic_helper_swap_state - store atomic state into current sw state * @state: atomic state * @stall: stall for preceding commits * * This function stores the atomic state into the current state pointers in all * driver objects. It should be called after all failing steps have been done * and succeeded, but before the actual hardware state is committed. * * For cleanup and error recovery the current state for all changed objects will * be swapped into @state. * * With that sequence it fits perfectly into the plane prepare/cleanup sequence: * * 1. Call drm_atomic_helper_prepare_planes() with the staged atomic state. * * 2. Do any other steps that might fail. * * 3. Put the staged state into the current state pointers with this function. * * 4. Actually commit the hardware state. * * 5. Call drm_atomic_helper_cleanup_planes() with @state, which since step 3 * contains the old state. Also do any other cleanup required with that state. * * @stall must be set when nonblocking commits for this driver directly access * the &drm_plane.state, &drm_crtc.state or &drm_connector.state pointer. With * the current atomic helpers this is almost always the case, since the helpers * don't pass the right state structures to the callbacks. * * Returns: * * Returns 0 on success. Can return -ERESTARTSYS when @stall is true and the * waiting for the previous commits has been interrupted. */ int drm_atomic_helper_swap_state(struct drm_atomic_state *state, bool stall) { int i, ret; struct drm_connector *connector; struct drm_connector_state *old_conn_state, *new_conn_state; struct drm_crtc *crtc; struct drm_crtc_state *old_crtc_state, *new_crtc_state; struct drm_plane *plane; struct drm_plane_state *old_plane_state, *new_plane_state; struct drm_crtc_commit *commit; struct drm_private_obj *obj; struct drm_private_state *old_obj_state, *new_obj_state; if (stall) { /* * We have to stall for hw_done here before * drm_atomic_helper_wait_for_dependencies() because flip * depth > 1 is not yet supported by all drivers. As long as * obj->state is directly dereferenced anywhere in the drivers * atomic_commit_tail function, then it's unsafe to swap state * before drm_atomic_helper_commit_hw_done() is called. */ for_each_old_crtc_in_state(state, crtc, old_crtc_state, i) { commit = old_crtc_state->commit; if (!commit) continue; ret = wait_for_completion_interruptible(&commit->hw_done); if (ret) return ret; } for_each_old_connector_in_state(state, connector, old_conn_state, i) { commit = old_conn_state->commit; if (!commit) continue; ret = wait_for_completion_interruptible(&commit->hw_done); if (ret) return ret; } for_each_old_plane_in_state(state, plane, old_plane_state, i) { commit = old_plane_state->commit; if (!commit) continue; ret = wait_for_completion_interruptible(&commit->hw_done); if (ret) return ret; } } for_each_oldnew_connector_in_state(state, connector, old_conn_state, new_conn_state, i) { WARN_ON(connector->state != old_conn_state); old_conn_state->state = state; new_conn_state->state = NULL; state->connectors[i].state = old_conn_state; connector->state = new_conn_state; } for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { WARN_ON(crtc->state != old_crtc_state); old_crtc_state->state = state; new_crtc_state->state = NULL; state->crtcs[i].state = old_crtc_state; crtc->state = new_crtc_state; if (new_crtc_state->commit) { spin_lock(&crtc->commit_lock); list_add(&new_crtc_state->commit->commit_entry, &crtc->commit_list); spin_unlock(&crtc->commit_lock); new_crtc_state->commit->event = NULL; } } for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, i) { WARN_ON(plane->state != old_plane_state); old_plane_state->state = state; new_plane_state->state = NULL; state->planes[i].state = old_plane_state; plane->state = new_plane_state; } for_each_oldnew_private_obj_in_state(state, obj, old_obj_state, new_obj_state, i) { WARN_ON(obj->state != old_obj_state); old_obj_state->state = state; new_obj_state->state = NULL; state->private_objs[i].state = old_obj_state; obj->state = new_obj_state; } return 0; } EXPORT_SYMBOL(drm_atomic_helper_swap_state); /** * drm_atomic_helper_update_plane - Helper for primary plane update using atomic * @plane: plane object to update * @crtc: owning CRTC of owning plane * @fb: framebuffer to flip onto plane * @crtc_x: x offset of primary plane on @crtc * @crtc_y: y offset of primary plane on @crtc * @crtc_w: width of primary plane rectangle on @crtc * @crtc_h: height of primary plane rectangle on @crtc * @src_x: x offset of @fb for panning * @src_y: y offset of @fb for panning * @src_w: width of source rectangle in @fb * @src_h: height of source rectangle in @fb * @ctx: lock acquire context * * Provides a default plane update handler using the atomic driver interface. * * RETURNS: * Zero on success, error code on failure */ int drm_atomic_helper_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, struct drm_framebuffer *fb, int crtc_x, int crtc_y, unsigned int crtc_w, unsigned int crtc_h, uint32_t src_x, uint32_t src_y, uint32_t src_w, uint32_t src_h, struct drm_modeset_acquire_ctx *ctx) { struct drm_atomic_state *state; struct drm_plane_state *plane_state; int ret = 0; state = drm_atomic_state_alloc(plane->dev); if (!state) return -ENOMEM; state->acquire_ctx = ctx; plane_state = drm_atomic_get_plane_state(state, plane); if (IS_ERR(plane_state)) { ret = PTR_ERR(plane_state); goto fail; } ret = drm_atomic_set_crtc_for_plane(plane_state, crtc); if (ret != 0) goto fail; drm_atomic_set_fb_for_plane(plane_state, fb); plane_state->crtc_x = crtc_x; plane_state->crtc_y = crtc_y; plane_state->crtc_w = crtc_w; plane_state->crtc_h = crtc_h; plane_state->src_x = src_x; plane_state->src_y = src_y; plane_state->src_w = src_w; plane_state->src_h = src_h; if (plane == crtc->cursor) state->legacy_cursor_update = true; ret = drm_atomic_commit(state); fail: drm_atomic_state_put(state); return ret; } EXPORT_SYMBOL(drm_atomic_helper_update_plane); /** * drm_atomic_helper_disable_plane - Helper for primary plane disable using * atomic * @plane: plane to disable * @ctx: lock acquire context * * Provides a default plane disable handler using the atomic driver interface. * * RETURNS: * Zero on success, error code on failure */ int drm_atomic_helper_disable_plane(struct drm_plane *plane, struct drm_modeset_acquire_ctx *ctx) { struct drm_atomic_state *state; struct drm_plane_state *plane_state; int ret = 0; state = drm_atomic_state_alloc(plane->dev); if (!state) return -ENOMEM; state->acquire_ctx = ctx; plane_state = drm_atomic_get_plane_state(state, plane); if (IS_ERR(plane_state)) { ret = PTR_ERR(plane_state); goto fail; } if (plane_state->crtc && plane_state->crtc->cursor == plane) plane_state->state->legacy_cursor_update = true; ret = __drm_atomic_helper_disable_plane(plane, plane_state); if (ret != 0) goto fail; ret = drm_atomic_commit(state); fail: drm_atomic_state_put(state); return ret; } EXPORT_SYMBOL(drm_atomic_helper_disable_plane); /** * drm_atomic_helper_set_config - set a new config from userspace * @set: mode set configuration * @ctx: lock acquisition context * * Provides a default CRTC set_config handler using the atomic driver interface. * * NOTE: For backwards compatibility with old userspace this automatically * resets the "link-status" property to GOOD, to force any link * re-training. The SETCRTC ioctl does not define whether an update does * need a full modeset or just a plane update, hence we're allowed to do * that. See also drm_connector_set_link_status_property(). * * Returns: * Returns 0 on success, negative errno numbers on failure. */ int drm_atomic_helper_set_config(struct drm_mode_set *set, struct drm_modeset_acquire_ctx *ctx) { struct drm_atomic_state *state; struct drm_crtc *crtc = set->crtc; int ret = 0; state = drm_atomic_state_alloc(crtc->dev); if (!state) return -ENOMEM; state->acquire_ctx = ctx; ret = __drm_atomic_helper_set_config(set, state); if (ret != 0) goto fail; ret = handle_conflicting_encoders(state, true); if (ret) goto fail; ret = drm_atomic_commit(state); fail: drm_atomic_state_put(state); return ret; } EXPORT_SYMBOL(drm_atomic_helper_set_config); /** * drm_atomic_helper_disable_all - disable all currently active outputs * @dev: DRM device * @ctx: lock acquisition context * * Loops through all connectors, finding those that aren't turned off and then * turns them off by setting their DPMS mode to OFF and deactivating the CRTC * that they are connected to. * * This is used for example in suspend/resume to disable all currently active * functions when suspending. If you just want to shut down everything at e.g. * driver unload, look at drm_atomic_helper_shutdown(). * * Note that if callers haven't already acquired all modeset locks this might * return -EDEADLK, which must be handled by calling drm_modeset_backoff(). * * Returns: * 0 on success or a negative error code on failure. * * See also: * drm_atomic_helper_suspend(), drm_atomic_helper_resume() and * drm_atomic_helper_shutdown(). */ int drm_atomic_helper_disable_all(struct drm_device *dev, struct drm_modeset_acquire_ctx *ctx) { struct drm_atomic_state *state; struct drm_connector_state *conn_state; struct drm_connector *conn; struct drm_plane_state *plane_state; struct drm_plane *plane; struct drm_crtc_state *crtc_state; struct drm_crtc *crtc; int ret, i; state = drm_atomic_state_alloc(dev); if (!state) return -ENOMEM; state->acquire_ctx = ctx; drm_for_each_crtc(crtc, dev) { crtc_state = drm_atomic_get_crtc_state(state, crtc); if (IS_ERR(crtc_state)) { ret = PTR_ERR(crtc_state); goto free; } crtc_state->active = false; ret = drm_atomic_set_mode_prop_for_crtc(crtc_state, NULL); if (ret < 0) goto free; ret = drm_atomic_add_affected_planes(state, crtc); if (ret < 0) goto free; ret = drm_atomic_add_affected_connectors(state, crtc); if (ret < 0) goto free; } for_each_new_connector_in_state(state, conn, conn_state, i) { ret = drm_atomic_set_crtc_for_connector(conn_state, NULL); if (ret < 0) goto free; } for_each_new_plane_in_state(state, plane, plane_state, i) { ret = drm_atomic_set_crtc_for_plane(plane_state, NULL); if (ret < 0) goto free; drm_atomic_set_fb_for_plane(plane_state, NULL); } ret = drm_atomic_commit(state); free: drm_atomic_state_put(state); return ret; } EXPORT_SYMBOL(drm_atomic_helper_disable_all); /** * drm_atomic_helper_shutdown - shutdown all CRTC * @dev: DRM device * * This shuts down all CRTC, which is useful for driver unloading. Shutdown on * suspend should instead be handled with drm_atomic_helper_suspend(), since * that also takes a snapshot of the modeset state to be restored on resume. * * This is just a convenience wrapper around drm_atomic_helper_disable_all(), * and it is the atomic version of drm_crtc_force_disable_all(). */ void drm_atomic_helper_shutdown(struct drm_device *dev) { struct drm_modeset_acquire_ctx ctx; int ret; DRM_MODESET_LOCK_ALL_BEGIN(dev, ctx, 0, ret); ret = drm_atomic_helper_disable_all(dev, &ctx); if (ret) drm_err(dev, "Disabling all crtc's during unload failed with %i\n", ret); DRM_MODESET_LOCK_ALL_END(dev, ctx, ret); } EXPORT_SYMBOL(drm_atomic_helper_shutdown); /** * drm_atomic_helper_duplicate_state - duplicate an atomic state object * @dev: DRM device * @ctx: lock acquisition context * * Makes a copy of the current atomic state by looping over all objects and * duplicating their respective states. This is used for example by suspend/ * resume support code to save the state prior to suspend such that it can * be restored upon resume. * * Note that this treats atomic state as persistent between save and restore. * Drivers must make sure that this is possible and won't result in confusion * or erroneous behaviour. * * Note that if callers haven't already acquired all modeset locks this might * return -EDEADLK, which must be handled by calling drm_modeset_backoff(). * * Returns: * A pointer to the copy of the atomic state object on success or an * ERR_PTR()-encoded error code on failure. * * See also: * drm_atomic_helper_suspend(), drm_atomic_helper_resume() */ struct drm_atomic_state * drm_atomic_helper_duplicate_state(struct drm_device *dev, struct drm_modeset_acquire_ctx *ctx) { struct drm_atomic_state *state; struct drm_connector *conn; struct drm_connector_list_iter conn_iter; struct drm_plane *plane; struct drm_crtc *crtc; int err = 0; state = drm_atomic_state_alloc(dev); if (!state) return ERR_PTR(-ENOMEM); state->acquire_ctx = ctx; state->duplicated = true; drm_for_each_crtc(crtc, dev) { struct drm_crtc_state *crtc_state; crtc_state = drm_atomic_get_crtc_state(state, crtc); if (IS_ERR(crtc_state)) { err = PTR_ERR(crtc_state); goto free; } } drm_for_each_plane(plane, dev) { struct drm_plane_state *plane_state; plane_state = drm_atomic_get_plane_state(state, plane); if (IS_ERR(plane_state)) { err = PTR_ERR(plane_state); goto free; } } drm_connector_list_iter_begin(dev, &conn_iter); drm_for_each_connector_iter(conn, &conn_iter) { struct drm_connector_state *conn_state; conn_state = drm_atomic_get_connector_state(state, conn); if (IS_ERR(conn_state)) { err = PTR_ERR(conn_state); drm_connector_list_iter_end(&conn_iter); goto free; } } drm_connector_list_iter_end(&conn_iter); /* clear the acquire context so that it isn't accidentally reused */ state->acquire_ctx = NULL; free: if (err < 0) { drm_atomic_state_put(state); state = ERR_PTR(err); } return state; } EXPORT_SYMBOL(drm_atomic_helper_duplicate_state); /** * drm_atomic_helper_suspend - subsystem-level suspend helper * @dev: DRM device * * Duplicates the current atomic state, disables all active outputs and then * returns a pointer to the original atomic state to the caller. Drivers can * pass this pointer to the drm_atomic_helper_resume() helper upon resume to * restore the output configuration that was active at the time the system * entered suspend. * * Note that it is potentially unsafe to use this. The atomic state object * returned by this function is assumed to be persistent. Drivers must ensure * that this holds true. Before calling this function, drivers must make sure * to suspend fbdev emulation so that nothing can be using the device. * * Returns: * A pointer to a copy of the state before suspend on success or an ERR_PTR()- * encoded error code on failure. Drivers should store the returned atomic * state object and pass it to the drm_atomic_helper_resume() helper upon * resume. * * See also: * drm_atomic_helper_duplicate_state(), drm_atomic_helper_disable_all(), * drm_atomic_helper_resume(), drm_atomic_helper_commit_duplicated_state() */ struct drm_atomic_state *drm_atomic_helper_suspend(struct drm_device *dev) { struct drm_modeset_acquire_ctx ctx; struct drm_atomic_state *state; int err; /* This can never be returned, but it makes the compiler happy */ state = ERR_PTR(-EINVAL); DRM_MODESET_LOCK_ALL_BEGIN(dev, ctx, 0, err); state = drm_atomic_helper_duplicate_state(dev, &ctx); if (IS_ERR(state)) goto unlock; err = drm_atomic_helper_disable_all(dev, &ctx); if (err < 0) { drm_atomic_state_put(state); state = ERR_PTR(err); goto unlock; } unlock: DRM_MODESET_LOCK_ALL_END(dev, ctx, err); if (err) return ERR_PTR(err); return state; } EXPORT_SYMBOL(drm_atomic_helper_suspend); /** * drm_atomic_helper_commit_duplicated_state - commit duplicated state * @state: duplicated atomic state to commit * @ctx: pointer to acquire_ctx to use for commit. * * The state returned by drm_atomic_helper_duplicate_state() and * drm_atomic_helper_suspend() is partially invalid, and needs to * be fixed up before commit. * * Returns: * 0 on success or a negative error code on failure. * * See also: * drm_atomic_helper_suspend() */ int drm_atomic_helper_commit_duplicated_state(struct drm_atomic_state *state, struct drm_modeset_acquire_ctx *ctx) { int i, ret; struct drm_plane *plane; struct drm_plane_state *new_plane_state; struct drm_connector *connector; struct drm_connector_state *new_conn_state; struct drm_crtc *crtc; struct drm_crtc_state *new_crtc_state; state->acquire_ctx = ctx; for_each_new_plane_in_state(state, plane, new_plane_state, i) state->planes[i].old_state = plane->state; for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) state->crtcs[i].old_state = crtc->state; for_each_new_connector_in_state(state, connector, new_conn_state, i) state->connectors[i].old_state = connector->state; ret = drm_atomic_commit(state); state->acquire_ctx = NULL; return ret; } EXPORT_SYMBOL(drm_atomic_helper_commit_duplicated_state); /** * drm_atomic_helper_resume - subsystem-level resume helper * @dev: DRM device * @state: atomic state to resume to * * Calls drm_mode_config_reset() to synchronize hardware and software states, * grabs all modeset locks and commits the atomic state object. This can be * used in conjunction with the drm_atomic_helper_suspend() helper to * implement suspend/resume for drivers that support atomic mode-setting. * * Returns: * 0 on success or a negative error code on failure. * * See also: * drm_atomic_helper_suspend() */ int drm_atomic_helper_resume(struct drm_device *dev, struct drm_atomic_state *state) { struct drm_modeset_acquire_ctx ctx; int err; drm_mode_config_reset(dev); DRM_MODESET_LOCK_ALL_BEGIN(dev, ctx, 0, err); err = drm_atomic_helper_commit_duplicated_state(state, &ctx); DRM_MODESET_LOCK_ALL_END(dev, ctx, err); drm_atomic_state_put(state); return err; } EXPORT_SYMBOL(drm_atomic_helper_resume); static int page_flip_common(struct drm_atomic_state *state, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_pending_vblank_event *event, uint32_t flags) { struct drm_plane *plane = crtc->primary; struct drm_plane_state *plane_state; struct drm_crtc_state *crtc_state; int ret = 0; crtc_state = drm_atomic_get_crtc_state(state, crtc); if (IS_ERR(crtc_state)) return PTR_ERR(crtc_state); crtc_state->event = event; crtc_state->async_flip = flags & DRM_MODE_PAGE_FLIP_ASYNC; plane_state = drm_atomic_get_plane_state(state, plane); if (IS_ERR(plane_state)) return PTR_ERR(plane_state); ret = drm_atomic_set_crtc_for_plane(plane_state, crtc); if (ret != 0) return ret; drm_atomic_set_fb_for_plane(plane_state, fb); /* Make sure we don't accidentally do a full modeset. */ state->allow_modeset = false; if (!crtc_state->active) { drm_dbg_atomic(crtc->dev, "[CRTC:%d:%s] disabled, rejecting legacy flip\n", crtc->base.id, crtc->name); return -EINVAL; } return ret; } /** * drm_atomic_helper_page_flip - execute a legacy page flip * @crtc: DRM CRTC * @fb: DRM framebuffer * @event: optional DRM event to signal upon completion * @flags: flip flags for non-vblank sync'ed updates * @ctx: lock acquisition context * * Provides a default &drm_crtc_funcs.page_flip implementation * using the atomic driver interface. * * Returns: * Returns 0 on success, negative errno numbers on failure. * * See also: * drm_atomic_helper_page_flip_target() */ int drm_atomic_helper_page_flip(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_pending_vblank_event *event, uint32_t flags, struct drm_modeset_acquire_ctx *ctx) { struct drm_plane *plane = crtc->primary; struct drm_atomic_state *state; int ret = 0; state = drm_atomic_state_alloc(plane->dev); if (!state) return -ENOMEM; state->acquire_ctx = ctx; ret = page_flip_common(state, crtc, fb, event, flags); if (ret != 0) goto fail; ret = drm_atomic_nonblocking_commit(state); fail: drm_atomic_state_put(state); return ret; } EXPORT_SYMBOL(drm_atomic_helper_page_flip); /** * drm_atomic_helper_page_flip_target - do page flip on target vblank period. * @crtc: DRM CRTC * @fb: DRM framebuffer * @event: optional DRM event to signal upon completion * @flags: flip flags for non-vblank sync'ed updates * @target: specifying the target vblank period when the flip to take effect * @ctx: lock acquisition context * * Provides a default &drm_crtc_funcs.page_flip_target implementation. * Similar to drm_atomic_helper_page_flip() with extra parameter to specify * target vblank period to flip. * * Returns: * Returns 0 on success, negative errno numbers on failure. */ int drm_atomic_helper_page_flip_target(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_pending_vblank_event *event, uint32_t flags, uint32_t target, struct drm_modeset_acquire_ctx *ctx) { struct drm_plane *plane = crtc->primary; struct drm_atomic_state *state; struct drm_crtc_state *crtc_state; int ret = 0; state = drm_atomic_state_alloc(plane->dev); if (!state) return -ENOMEM; state->acquire_ctx = ctx; ret = page_flip_common(state, crtc, fb, event, flags); if (ret != 0) goto fail; crtc_state = drm_atomic_get_new_crtc_state(state, crtc); if (WARN_ON(!crtc_state)) { ret = -EINVAL; goto fail; } crtc_state->target_vblank = target; ret = drm_atomic_nonblocking_commit(state); fail: drm_atomic_state_put(state); return ret; } EXPORT_SYMBOL(drm_atomic_helper_page_flip_target); /** * drm_atomic_helper_bridge_propagate_bus_fmt() - Propagate output format to * the input end of a bridge * @bridge: bridge control structure * @bridge_state: new bridge state * @crtc_state: new CRTC state * @conn_state: new connector state * @output_fmt: tested output bus format * @num_input_fmts: will contain the size of the returned array * * This helper is a pluggable implementation of the * &drm_bridge_funcs.atomic_get_input_bus_fmts operation for bridges that don't * modify the bus configuration between their input and their output. It * returns an array of input formats with a single element set to @output_fmt. * * RETURNS: * a valid format array of size @num_input_fmts, or NULL if the allocation * failed */ u32 * drm_atomic_helper_bridge_propagate_bus_fmt(struct drm_bridge *bridge, struct drm_bridge_state *bridge_state, struct drm_crtc_state *crtc_state, struct drm_connector_state *conn_state, u32 output_fmt, unsigned int *num_input_fmts) { u32 *input_fmts; input_fmts = kzalloc(sizeof(*input_fmts), GFP_KERNEL); if (!input_fmts) { *num_input_fmts = 0; return NULL; } *num_input_fmts = 1; input_fmts[0] = output_fmt; return input_fmts; } EXPORT_SYMBOL(drm_atomic_helper_bridge_propagate_bus_fmt);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1