Contributors: 21
Author Tokens Token Proportion Commits Commit Proportion
Sean Paul 564 68.53% 3 6.82%
Daniel Vetter 67 8.14% 9 20.45%
Rob Clark 67 8.14% 5 11.36%
Maarten Lankhorst 37 4.50% 7 15.91%
Dave Airlie 10 1.22% 1 2.27%
Boris Brezillon 10 1.22% 1 2.27%
Gustavo Padovan 10 1.22% 1 2.27%
Thierry Reding 9 1.09% 1 2.27%
Lionel Landwerlin 8 0.97% 1 2.27%
Hai Li 8 0.97% 1 2.27%
Ander Conselvan de Oliveira 8 0.97% 1 2.27%
Ville Syrjälä 6 0.73% 3 6.82%
Matt Roper 4 0.49% 1 2.27%
Sam Ravnborg 4 0.49% 2 4.55%
Noralf Trönnes 3 0.36% 1 2.27%
Keith Packard 2 0.24% 1 2.27%
Daniel Stone 2 0.24% 1 2.27%
Chris Wilson 1 0.12% 1 2.27%
Peter Rosin 1 0.12% 1 2.27%
Dan Carpenter 1 0.12% 1 2.27%
Jesse Barnes 1 0.12% 1 2.27%
Total 823 44


// SPDX-License-Identifier: MIT
/*
 * Copyright (C) 2019 Google, Inc.
 *
 * Authors:
 * Sean Paul <seanpaul@chromium.org>
 */
#include <linux/average.h>
#include <linux/bitops.h>
#include <linux/slab.h>
#include <linux/workqueue.h>

#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_connector.h>
#include <drm/drm_crtc.h>
#include <drm/drm_device.h>
#include <drm/drm_mode_config.h>
#include <drm/drm_modeset_lock.h>
#include <drm/drm_print.h>
#include <drm/drm_self_refresh_helper.h>

/**
 * DOC: overview
 *
 * This helper library provides an easy way for drivers to leverage the atomic
 * framework to implement panel self refresh (SR) support. Drivers are
 * responsible for initializing and cleaning up the SR helpers on load/unload
 * (see &drm_self_refresh_helper_init/&drm_self_refresh_helper_cleanup).
 * The connector is responsible for setting
 * &drm_connector_state.self_refresh_aware to true at runtime if it is SR-aware
 * (meaning it knows how to initiate self refresh on the panel).
 *
 * Once a crtc has enabled SR using &drm_self_refresh_helper_init, the
 * helpers will monitor activity and call back into the driver to enable/disable
 * SR as appropriate. The best way to think about this is that it's a DPMS
 * on/off request with &drm_crtc_state.self_refresh_active set in crtc state
 * that tells you to disable/enable SR on the panel instead of power-cycling it.
 *
 * During SR, drivers may choose to fully disable their crtc/encoder/bridge
 * hardware (in which case no driver changes are necessary), or they can inspect
 * &drm_crtc_state.self_refresh_active if they want to enter low power mode
 * without full disable (in case full disable/enable is too slow).
 *
 * SR will be deactivated if there are any atomic updates affecting the
 * pipe that is in SR mode. If a crtc is driving multiple connectors, all
 * connectors must be SR aware and all will enter/exit SR mode at the same time.
 *
 * If the crtc and connector are SR aware, but the panel connected does not
 * support it (or is otherwise unable to enter SR), the driver should fail
 * atomic_check when &drm_crtc_state.self_refresh_active is true.
 */

#define SELF_REFRESH_AVG_SEED_MS 200

DECLARE_EWMA(psr_time, 4, 4)

struct drm_self_refresh_data {
	struct drm_crtc *crtc;
	struct delayed_work entry_work;

	struct mutex avg_mutex;
	struct ewma_psr_time entry_avg_ms;
	struct ewma_psr_time exit_avg_ms;
};

static void drm_self_refresh_helper_entry_work(struct work_struct *work)
{
	struct drm_self_refresh_data *sr_data = container_of(
				to_delayed_work(work),
				struct drm_self_refresh_data, entry_work);
	struct drm_crtc *crtc = sr_data->crtc;
	struct drm_device *dev = crtc->dev;
	struct drm_modeset_acquire_ctx ctx;
	struct drm_atomic_state *state;
	struct drm_connector *conn;
	struct drm_connector_state *conn_state;
	struct drm_crtc_state *crtc_state;
	int i, ret = 0;

	drm_modeset_acquire_init(&ctx, 0);

	state = drm_atomic_state_alloc(dev);
	if (!state) {
		ret = -ENOMEM;
		goto out_drop_locks;
	}

retry:
	state->acquire_ctx = &ctx;

	crtc_state = drm_atomic_get_crtc_state(state, crtc);
	if (IS_ERR(crtc_state)) {
		ret = PTR_ERR(crtc_state);
		goto out;
	}

	if (!crtc_state->enable)
		goto out;

	ret = drm_atomic_add_affected_connectors(state, crtc);
	if (ret)
		goto out;

	for_each_new_connector_in_state(state, conn, conn_state, i) {
		if (!conn_state->self_refresh_aware)
			goto out;
	}

	crtc_state->active = false;
	crtc_state->self_refresh_active = true;

	ret = drm_atomic_commit(state);
	if (ret)
		goto out;

out:
	if (ret == -EDEADLK) {
		drm_atomic_state_clear(state);
		ret = drm_modeset_backoff(&ctx);
		if (!ret)
			goto retry;
	}

	drm_atomic_state_put(state);

out_drop_locks:
	drm_modeset_drop_locks(&ctx);
	drm_modeset_acquire_fini(&ctx);
}

/**
 * drm_self_refresh_helper_update_avg_times - Updates a crtc's SR time averages
 * @state: the state which has just been applied to hardware
 * @commit_time_ms: the amount of time in ms that this commit took to complete
 * @new_self_refresh_mask: bitmask of crtc's that have self_refresh_active in
 *    new state
 *
 * Called after &drm_mode_config_funcs.atomic_commit_tail, this function will
 * update the average entry/exit self refresh times on self refresh transitions.
 * These averages will be used when calculating how long to delay before
 * entering self refresh mode after activity.
 */
void
drm_self_refresh_helper_update_avg_times(struct drm_atomic_state *state,
					 unsigned int commit_time_ms,
					 unsigned int new_self_refresh_mask)
{
	struct drm_crtc *crtc;
	struct drm_crtc_state *old_crtc_state;
	int i;

	for_each_old_crtc_in_state(state, crtc, old_crtc_state, i) {
		bool new_self_refresh_active = new_self_refresh_mask & BIT(i);
		struct drm_self_refresh_data *sr_data = crtc->self_refresh_data;
		struct ewma_psr_time *time;

		if (old_crtc_state->self_refresh_active ==
		    new_self_refresh_active)
			continue;

		if (new_self_refresh_active)
			time = &sr_data->entry_avg_ms;
		else
			time = &sr_data->exit_avg_ms;

		mutex_lock(&sr_data->avg_mutex);
		ewma_psr_time_add(time, commit_time_ms);
		mutex_unlock(&sr_data->avg_mutex);
	}
}
EXPORT_SYMBOL(drm_self_refresh_helper_update_avg_times);

/**
 * drm_self_refresh_helper_alter_state - Alters the atomic state for SR exit
 * @state: the state currently being checked
 *
 * Called at the end of atomic check. This function checks the state for flags
 * incompatible with self refresh exit and changes them. This is a bit
 * disingenuous since userspace is expecting one thing and we're giving it
 * another. However in order to keep self refresh entirely hidden from
 * userspace, this is required.
 *
 * At the end, we queue up the self refresh entry work so we can enter PSR after
 * the desired delay.
 */
void drm_self_refresh_helper_alter_state(struct drm_atomic_state *state)
{
	struct drm_crtc *crtc;
	struct drm_crtc_state *crtc_state;
	int i;

	if (state->async_update || !state->allow_modeset) {
		for_each_old_crtc_in_state(state, crtc, crtc_state, i) {
			if (crtc_state->self_refresh_active) {
				state->async_update = false;
				state->allow_modeset = true;
				break;
			}
		}
	}

	for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
		struct drm_self_refresh_data *sr_data;
		unsigned int delay;

		/* Don't trigger the entry timer when we're already in SR */
		if (crtc_state->self_refresh_active)
			continue;

		sr_data = crtc->self_refresh_data;
		if (!sr_data)
			continue;

		mutex_lock(&sr_data->avg_mutex);
		delay = (ewma_psr_time_read(&sr_data->entry_avg_ms) +
			 ewma_psr_time_read(&sr_data->exit_avg_ms)) * 2;
		mutex_unlock(&sr_data->avg_mutex);

		mod_delayed_work(system_wq, &sr_data->entry_work,
				 msecs_to_jiffies(delay));
	}
}
EXPORT_SYMBOL(drm_self_refresh_helper_alter_state);

/**
 * drm_self_refresh_helper_init - Initializes self refresh helpers for a crtc
 * @crtc: the crtc which supports self refresh supported displays
 *
 * Returns zero if successful or -errno on failure
 */
int drm_self_refresh_helper_init(struct drm_crtc *crtc)
{
	struct drm_self_refresh_data *sr_data = crtc->self_refresh_data;

	/* Helper is already initialized */
	if (WARN_ON(sr_data))
		return -EINVAL;

	sr_data = kzalloc(sizeof(*sr_data), GFP_KERNEL);
	if (!sr_data)
		return -ENOMEM;

	INIT_DELAYED_WORK(&sr_data->entry_work,
			  drm_self_refresh_helper_entry_work);
	sr_data->crtc = crtc;
	mutex_init(&sr_data->avg_mutex);
	ewma_psr_time_init(&sr_data->entry_avg_ms);
	ewma_psr_time_init(&sr_data->exit_avg_ms);

	/*
	 * Seed the averages so they're non-zero (and sufficiently large
	 * for even poorly performing panels). As time goes on, this will be
	 * averaged out and the values will trend to their true value.
	 */
	ewma_psr_time_add(&sr_data->entry_avg_ms, SELF_REFRESH_AVG_SEED_MS);
	ewma_psr_time_add(&sr_data->exit_avg_ms, SELF_REFRESH_AVG_SEED_MS);

	crtc->self_refresh_data = sr_data;
	return 0;
}
EXPORT_SYMBOL(drm_self_refresh_helper_init);

/**
 * drm_self_refresh_helper_cleanup - Cleans up self refresh helpers for a crtc
 * @crtc: the crtc to cleanup
 */
void drm_self_refresh_helper_cleanup(struct drm_crtc *crtc)
{
	struct drm_self_refresh_data *sr_data = crtc->self_refresh_data;

	/* Helper is already uninitialized */
	if (!sr_data)
		return;

	crtc->self_refresh_data = NULL;

	cancel_delayed_work_sync(&sr_data->entry_work);
	kfree(sr_data);
}
EXPORT_SYMBOL(drm_self_refresh_helper_cleanup);