Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Alan Cox | 1513 | 82.90% | 4 | 14.29% |
Patrik Jakobsson | 202 | 11.07% | 9 | 32.14% |
Daniel Vetter | 33 | 1.81% | 3 | 10.71% |
Thomas Zimmermann | 28 | 1.53% | 3 | 10.71% |
Jan Nikitenko | 21 | 1.15% | 1 | 3.57% |
Rob Clark | 12 | 0.66% | 1 | 3.57% |
Sam Ravnborg | 5 | 0.27% | 1 | 3.57% |
Colin Ian King | 3 | 0.16% | 1 | 3.57% |
Kirill A. Shutemov | 2 | 0.11% | 1 | 3.57% |
Lee Jones | 2 | 0.11% | 1 | 3.57% |
Thomas Gleixner | 2 | 0.11% | 1 | 3.57% |
Kuppuswamy Sathyanarayanan | 1 | 0.05% | 1 | 3.57% |
Joe Perches | 1 | 0.05% | 1 | 3.57% |
Total | 1825 | 28 |
// SPDX-License-Identifier: GPL-2.0-only /* * Copyright © 2006-2009 Intel Corporation * * Authors: * Eric Anholt <eric@anholt.net> * Dave Airlie <airlied@linux.ie> * Jesse Barnes <jesse.barnes@intel.com> */ #include <linux/i2c.h> #include <linux/pm_runtime.h> #include <asm/intel-mid.h> #include <drm/drm_edid.h> #include <drm/drm_modeset_helper_vtables.h> #include <drm/drm_simple_kms_helper.h> #include "intel_bios.h" #include "power.h" #include "psb_drv.h" #include "psb_intel_drv.h" #include "psb_intel_reg.h" /* The max/min PWM frequency in BPCR[31:17] - */ /* The smallest number is 1 (not 0) that can fit in the * 15-bit field of the and then*/ /* shifts to the left by one bit to get the actual 16-bit * value that the 15-bits correspond to.*/ #define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF #define BRIGHTNESS_MAX_LEVEL 100 /* * Sets the power state for the panel. */ static void oaktrail_lvds_set_power(struct drm_device *dev, struct gma_encoder *gma_encoder, bool on) { u32 pp_status; struct drm_psb_private *dev_priv = to_drm_psb_private(dev); if (!gma_power_begin(dev, true)) return; if (on) { REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | POWER_TARGET_ON); do { pp_status = REG_READ(PP_STATUS); } while ((pp_status & (PP_ON | PP_READY)) == PP_READY); dev_priv->is_lvds_on = true; if (dev_priv->ops->lvds_bl_power) dev_priv->ops->lvds_bl_power(dev, true); } else { if (dev_priv->ops->lvds_bl_power) dev_priv->ops->lvds_bl_power(dev, false); REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & ~POWER_TARGET_ON); do { pp_status = REG_READ(PP_STATUS); } while (pp_status & PP_ON); dev_priv->is_lvds_on = false; } gma_power_end(dev); } static void oaktrail_lvds_dpms(struct drm_encoder *encoder, int mode) { struct drm_device *dev = encoder->dev; struct gma_encoder *gma_encoder = to_gma_encoder(encoder); if (mode == DRM_MODE_DPMS_ON) oaktrail_lvds_set_power(dev, gma_encoder, true); else oaktrail_lvds_set_power(dev, gma_encoder, false); /* XXX: We never power down the LVDS pairs. */ } static void oaktrail_lvds_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { struct drm_device *dev = encoder->dev; struct drm_psb_private *dev_priv = to_drm_psb_private(dev); struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; struct drm_connector_list_iter conn_iter; struct drm_connector *connector = NULL; struct drm_crtc *crtc = encoder->crtc; u32 lvds_port; uint64_t v = DRM_MODE_SCALE_FULLSCREEN; if (!gma_power_begin(dev, true)) return; /* * The LVDS pin pair will already have been turned on in the * psb_intel_crtc_mode_set since it has a large impact on the DPLL * settings. */ lvds_port = (REG_READ(LVDS) & (~LVDS_PIPEB_SELECT)) | LVDS_PORT_EN | LVDS_BORDER_EN; /* If the firmware says dither on Moorestown, or the BIOS does on Oaktrail then enable dithering */ if (mode_dev->panel_wants_dither || dev_priv->lvds_dither) lvds_port |= MRST_PANEL_8TO6_DITHER_ENABLE; REG_WRITE(LVDS, lvds_port); /* Find the connector we're trying to set up */ drm_connector_list_iter_begin(dev, &conn_iter); drm_for_each_connector_iter(connector, &conn_iter) { if (connector->encoder && connector->encoder->crtc == crtc) break; } if (!connector) { drm_connector_list_iter_end(&conn_iter); DRM_ERROR("Couldn't find connector when setting mode"); gma_power_end(dev); return; } drm_object_property_get_value( &connector->base, dev->mode_config.scaling_mode_property, &v); drm_connector_list_iter_end(&conn_iter); if (v == DRM_MODE_SCALE_NO_SCALE) REG_WRITE(PFIT_CONTROL, 0); else if (v == DRM_MODE_SCALE_ASPECT) { if ((mode->vdisplay != adjusted_mode->crtc_vdisplay) || (mode->hdisplay != adjusted_mode->crtc_hdisplay)) { if ((adjusted_mode->crtc_hdisplay * mode->vdisplay) == (mode->hdisplay * adjusted_mode->crtc_vdisplay)) REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); else if ((adjusted_mode->crtc_hdisplay * mode->vdisplay) > (mode->hdisplay * adjusted_mode->crtc_vdisplay)) REG_WRITE(PFIT_CONTROL, PFIT_ENABLE | PFIT_SCALING_MODE_PILLARBOX); else REG_WRITE(PFIT_CONTROL, PFIT_ENABLE | PFIT_SCALING_MODE_LETTERBOX); } else REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); } else /*(v == DRM_MODE_SCALE_FULLSCREEN)*/ REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); gma_power_end(dev); } static void oaktrail_lvds_prepare(struct drm_encoder *encoder) { struct drm_device *dev = encoder->dev; struct drm_psb_private *dev_priv = to_drm_psb_private(dev); struct gma_encoder *gma_encoder = to_gma_encoder(encoder); struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; if (!gma_power_begin(dev, true)) return; mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL & BACKLIGHT_DUTY_CYCLE_MASK); oaktrail_lvds_set_power(dev, gma_encoder, false); gma_power_end(dev); } static u32 oaktrail_lvds_get_max_backlight(struct drm_device *dev) { struct drm_psb_private *dev_priv = to_drm_psb_private(dev); u32 ret; if (gma_power_begin(dev, false)) { ret = ((REG_READ(BLC_PWM_CTL) & BACKLIGHT_MODULATION_FREQ_MASK) >> BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; gma_power_end(dev); } else ret = ((dev_priv->regs.saveBLC_PWM_CTL & BACKLIGHT_MODULATION_FREQ_MASK) >> BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; return ret; } static void oaktrail_lvds_commit(struct drm_encoder *encoder) { struct drm_device *dev = encoder->dev; struct drm_psb_private *dev_priv = to_drm_psb_private(dev); struct gma_encoder *gma_encoder = to_gma_encoder(encoder); struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; if (mode_dev->backlight_duty_cycle == 0) mode_dev->backlight_duty_cycle = oaktrail_lvds_get_max_backlight(dev); oaktrail_lvds_set_power(dev, gma_encoder, true); } static const struct drm_encoder_helper_funcs oaktrail_lvds_helper_funcs = { .dpms = oaktrail_lvds_dpms, .mode_fixup = psb_intel_lvds_mode_fixup, .prepare = oaktrail_lvds_prepare, .mode_set = oaktrail_lvds_mode_set, .commit = oaktrail_lvds_commit, }; /* Returns the panel fixed mode from configuration. */ static void oaktrail_lvds_get_configuration_mode(struct drm_device *dev, struct psb_intel_mode_device *mode_dev) { struct drm_display_mode *mode = NULL; struct drm_psb_private *dev_priv = to_drm_psb_private(dev); struct oaktrail_timing_info *ti = &dev_priv->gct_data.DTD; mode_dev->panel_fixed_mode = NULL; /* Use the firmware provided data on Moorestown */ if (dev_priv->has_gct) { mode = kzalloc(sizeof(*mode), GFP_KERNEL); if (!mode) return; mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo; mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo; mode->hsync_start = mode->hdisplay + \ ((ti->hsync_offset_hi << 8) | \ ti->hsync_offset_lo); mode->hsync_end = mode->hsync_start + \ ((ti->hsync_pulse_width_hi << 8) | \ ti->hsync_pulse_width_lo); mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \ ti->hblank_lo); mode->vsync_start = \ mode->vdisplay + ((ti->vsync_offset_hi << 4) | \ ti->vsync_offset_lo); mode->vsync_end = \ mode->vsync_start + ((ti->vsync_pulse_width_hi << 4) | \ ti->vsync_pulse_width_lo); mode->vtotal = mode->vdisplay + \ ((ti->vblank_hi << 8) | ti->vblank_lo); mode->clock = ti->pixel_clock * 10; #if 0 pr_info("hdisplay is %d\n", mode->hdisplay); pr_info("vdisplay is %d\n", mode->vdisplay); pr_info("HSS is %d\n", mode->hsync_start); pr_info("HSE is %d\n", mode->hsync_end); pr_info("htotal is %d\n", mode->htotal); pr_info("VSS is %d\n", mode->vsync_start); pr_info("VSE is %d\n", mode->vsync_end); pr_info("vtotal is %d\n", mode->vtotal); pr_info("clock is %d\n", mode->clock); #endif mode_dev->panel_fixed_mode = mode; } /* Use the BIOS VBT mode if available */ if (mode_dev->panel_fixed_mode == NULL && mode_dev->vbt_mode) mode_dev->panel_fixed_mode = drm_mode_duplicate(dev, mode_dev->vbt_mode); /* Then try the LVDS VBT mode */ if (mode_dev->panel_fixed_mode == NULL) if (dev_priv->lfp_lvds_vbt_mode) mode_dev->panel_fixed_mode = drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode); /* If we still got no mode then bail */ if (mode_dev->panel_fixed_mode == NULL) return; drm_mode_set_name(mode_dev->panel_fixed_mode); drm_mode_set_crtcinfo(mode_dev->panel_fixed_mode, 0); } /** * oaktrail_lvds_init - setup LVDS connectors on this device * @dev: drm device * @mode_dev: PSB mode device * * Create the connector, register the LVDS DDC bus, and try to figure out what * modes we can display on the LVDS panel (if present). */ void oaktrail_lvds_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev) { struct gma_encoder *gma_encoder; struct gma_connector *gma_connector; struct gma_i2c_chan *ddc_bus; struct drm_connector *connector; struct drm_encoder *encoder; struct drm_psb_private *dev_priv = to_drm_psb_private(dev); struct edid *edid; struct i2c_adapter *i2c_adap; struct drm_display_mode *scan; /* *modes, *bios_mode; */ int ret; gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL); if (!gma_encoder) return; gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL); if (!gma_connector) goto err_free_encoder; connector = &gma_connector->base; encoder = &gma_encoder->base; dev_priv->is_lvds_on = true; ret = drm_connector_init(dev, connector, &psb_intel_lvds_connector_funcs, DRM_MODE_CONNECTOR_LVDS); if (ret) goto err_free_connector; ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_LVDS); if (ret) goto err_connector_cleanup; gma_connector_attach_encoder(gma_connector, gma_encoder); gma_encoder->type = INTEL_OUTPUT_LVDS; drm_encoder_helper_add(encoder, &oaktrail_lvds_helper_funcs); drm_connector_helper_add(connector, &psb_intel_lvds_connector_helper_funcs); connector->display_info.subpixel_order = SubPixelHorizontalRGB; connector->interlace_allowed = false; connector->doublescan_allowed = false; drm_object_attach_property(&connector->base, dev->mode_config.scaling_mode_property, DRM_MODE_SCALE_FULLSCREEN); drm_object_attach_property(&connector->base, dev_priv->backlight_property, BRIGHTNESS_MAX_LEVEL); mode_dev->panel_wants_dither = false; if (dev_priv->has_gct) mode_dev->panel_wants_dither = (dev_priv->gct_data. Panel_Port_Control & MRST_PANEL_8TO6_DITHER_ENABLE); if (dev_priv->lvds_dither) mode_dev->panel_wants_dither = 1; /* * LVDS discovery: * 1) check for EDID on DDC * 2) check for VBT data * 3) check to see if LVDS is already on * if none of the above, no panel * 4) make sure lid is open * if closed, act like it's not there for now */ edid = NULL; mutex_lock(&dev->mode_config.mutex); i2c_adap = i2c_get_adapter(dev_priv->ops->i2c_bus); if (i2c_adap) edid = drm_get_edid(connector, i2c_adap); if (edid == NULL && dev_priv->lpc_gpio_base) { ddc_bus = oaktrail_lvds_i2c_init(dev); if (!IS_ERR(ddc_bus)) { i2c_adap = &ddc_bus->base; edid = drm_get_edid(connector, i2c_adap); } } /* * Due to the logic in probing for i2c buses above we do not know the * i2c_adap until now. Hence we cannot use drm_connector_init_with_ddc() * but must instead set connector->ddc manually here. */ connector->ddc = i2c_adap; /* * Attempt to get the fixed panel mode from DDC. Assume that the * preferred mode is the right one. */ if (edid) { drm_connector_update_edid_property(connector, edid); drm_add_edid_modes(connector, edid); kfree(edid); list_for_each_entry(scan, &connector->probed_modes, head) { if (scan->type & DRM_MODE_TYPE_PREFERRED) { mode_dev->panel_fixed_mode = drm_mode_duplicate(dev, scan); goto out; /* FIXME: check for quirks */ } } } else dev_err(dev->dev, "No ddc adapter available!\n"); /* * If we didn't get EDID, try geting panel timing * from configuration data */ oaktrail_lvds_get_configuration_mode(dev, mode_dev); if (mode_dev->panel_fixed_mode) { mode_dev->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; goto out; /* FIXME: check for quirks */ } /* If we still don't have a mode after all that, give up. */ if (!mode_dev->panel_fixed_mode) { dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n"); goto err_unlock; } out: mutex_unlock(&dev->mode_config.mutex); return; err_unlock: mutex_unlock(&dev->mode_config.mutex); gma_i2c_destroy(to_gma_i2c_chan(connector->ddc)); drm_encoder_cleanup(encoder); err_connector_cleanup: drm_connector_cleanup(connector); err_free_connector: kfree(gma_connector); err_free_encoder: kfree(gma_encoder); }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1