Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Puranjay Mohan | 3082 | 94.54% | 3 | 37.50% |
Ramona Bolboaca | 160 | 4.91% | 2 | 25.00% |
Jonathan Cameron | 15 | 0.46% | 2 | 25.00% |
Andy Shevchenko | 3 | 0.09% | 1 | 12.50% |
Total | 3260 | 8 |
// SPDX-License-Identifier: GPL-2.0-only /* * ADXL355 3-Axis Digital Accelerometer IIO core driver * * Copyright (c) 2021 Puranjay Mohan <puranjay12@gmail.com> * * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adxl354_adxl355.pdf */ #include <linux/bits.h> #include <linux/bitfield.h> #include <linux/iio/buffer.h> #include <linux/iio/iio.h> #include <linux/iio/trigger.h> #include <linux/iio/triggered_buffer.h> #include <linux/iio/trigger_consumer.h> #include <linux/limits.h> #include <linux/math64.h> #include <linux/module.h> #include <linux/mod_devicetable.h> #include <linux/property.h> #include <linux/regmap.h> #include <linux/units.h> #include <asm/unaligned.h> #include "adxl355.h" /* ADXL355 Register Definitions */ #define ADXL355_DEVID_AD_REG 0x00 #define ADXL355_DEVID_MST_REG 0x01 #define ADXL355_PARTID_REG 0x02 #define ADXL355_STATUS_REG 0x04 #define ADXL355_FIFO_ENTRIES_REG 0x05 #define ADXL355_TEMP2_REG 0x06 #define ADXL355_XDATA3_REG 0x08 #define ADXL355_YDATA3_REG 0x0B #define ADXL355_ZDATA3_REG 0x0E #define ADXL355_FIFO_DATA_REG 0x11 #define ADXL355_OFFSET_X_H_REG 0x1E #define ADXL355_OFFSET_Y_H_REG 0x20 #define ADXL355_OFFSET_Z_H_REG 0x22 #define ADXL355_ACT_EN_REG 0x24 #define ADXL355_ACT_THRESH_H_REG 0x25 #define ADXL355_ACT_THRESH_L_REG 0x26 #define ADXL355_ACT_COUNT_REG 0x27 #define ADXL355_FILTER_REG 0x28 #define ADXL355_FILTER_ODR_MSK GENMASK(3, 0) #define ADXL355_FILTER_HPF_MSK GENMASK(6, 4) #define ADXL355_FIFO_SAMPLES_REG 0x29 #define ADXL355_INT_MAP_REG 0x2A #define ADXL355_SYNC_REG 0x2B #define ADXL355_RANGE_REG 0x2C #define ADXL355_POWER_CTL_REG 0x2D #define ADXL355_POWER_CTL_MODE_MSK GENMASK(1, 0) #define ADXL355_POWER_CTL_DRDY_MSK BIT(2) #define ADXL355_SELF_TEST_REG 0x2E #define ADXL355_RESET_REG 0x2F #define ADXL355_DEVID_AD_VAL 0xAD #define ADXL355_DEVID_MST_VAL 0x1D #define ADXL355_PARTID_VAL 0xED #define ADXL359_PARTID_VAL 0xE9 #define ADXL355_RESET_CODE 0x52 static const struct regmap_range adxl355_read_reg_range[] = { regmap_reg_range(ADXL355_DEVID_AD_REG, ADXL355_FIFO_DATA_REG), regmap_reg_range(ADXL355_OFFSET_X_H_REG, ADXL355_SELF_TEST_REG), }; const struct regmap_access_table adxl355_readable_regs_tbl = { .yes_ranges = adxl355_read_reg_range, .n_yes_ranges = ARRAY_SIZE(adxl355_read_reg_range), }; EXPORT_SYMBOL_NS_GPL(adxl355_readable_regs_tbl, IIO_ADXL355); static const struct regmap_range adxl355_write_reg_range[] = { regmap_reg_range(ADXL355_OFFSET_X_H_REG, ADXL355_RESET_REG), }; const struct regmap_access_table adxl355_writeable_regs_tbl = { .yes_ranges = adxl355_write_reg_range, .n_yes_ranges = ARRAY_SIZE(adxl355_write_reg_range), }; EXPORT_SYMBOL_NS_GPL(adxl355_writeable_regs_tbl, IIO_ADXL355); const struct adxl355_chip_info adxl35x_chip_info[] = { [ADXL355] = { .name = "adxl355", .part_id = ADXL355_PARTID_VAL, /* * At +/- 2g with 20-bit resolution, scale is given in datasheet * as 3.9ug/LSB = 0.0000039 * 9.80665 = 0.00003824593 m/s^2. */ .accel_scale = { .integer = 0, .decimal = 38245, }, /* * The datasheet defines an intercept of 1885 LSB at 25 degC * and a slope of -9.05 LSB/C. The following formula can be used * to find the temperature: * Temp = ((RAW - 1885)/(-9.05)) + 25 but this doesn't follow * the format of the IIO which is Temp = (RAW + OFFSET) * SCALE. * Hence using some rearranging we get the scale as -110.497238 * and offset as -2111.25. */ .temp_offset = { .integer = -2111, .decimal = 250000, }, }, [ADXL359] = { .name = "adxl359", .part_id = ADXL359_PARTID_VAL, /* * At +/- 10g with 20-bit resolution, scale is given in datasheet * as 19.5ug/LSB = 0.0000195 * 9.80665 = 0.0.00019122967 m/s^2. */ .accel_scale = { .integer = 0, .decimal = 191229, }, /* * The datasheet defines an intercept of 1852 LSB at 25 degC * and a slope of -9.05 LSB/C. The following formula can be used * to find the temperature: * Temp = ((RAW - 1852)/(-9.05)) + 25 but this doesn't follow * the format of the IIO which is Temp = (RAW + OFFSET) * SCALE. * Hence using some rearranging we get the scale as -110.497238 * and offset as -2079.25. */ .temp_offset = { .integer = -2079, .decimal = 250000, }, }, }; EXPORT_SYMBOL_NS_GPL(adxl35x_chip_info, IIO_ADXL355); enum adxl355_op_mode { ADXL355_MEASUREMENT, ADXL355_STANDBY, ADXL355_TEMP_OFF, }; enum adxl355_odr { ADXL355_ODR_4000HZ, ADXL355_ODR_2000HZ, ADXL355_ODR_1000HZ, ADXL355_ODR_500HZ, ADXL355_ODR_250HZ, ADXL355_ODR_125HZ, ADXL355_ODR_62_5HZ, ADXL355_ODR_31_25HZ, ADXL355_ODR_15_625HZ, ADXL355_ODR_7_813HZ, ADXL355_ODR_3_906HZ, }; enum adxl355_hpf_3db { ADXL355_HPF_OFF, ADXL355_HPF_24_7, ADXL355_HPF_6_2084, ADXL355_HPF_1_5545, ADXL355_HPF_0_3862, ADXL355_HPF_0_0954, ADXL355_HPF_0_0238, }; static const int adxl355_odr_table[][2] = { [0] = {4000, 0}, [1] = {2000, 0}, [2] = {1000, 0}, [3] = {500, 0}, [4] = {250, 0}, [5] = {125, 0}, [6] = {62, 500000}, [7] = {31, 250000}, [8] = {15, 625000}, [9] = {7, 813000}, [10] = {3, 906000}, }; static const int adxl355_hpf_3db_multipliers[] = { 0, 247000, 62084, 15545, 3862, 954, 238, }; enum adxl355_chans { chan_x, chan_y, chan_z, }; struct adxl355_chan_info { u8 data_reg; u8 offset_reg; }; static const struct adxl355_chan_info adxl355_chans[] = { [chan_x] = { .data_reg = ADXL355_XDATA3_REG, .offset_reg = ADXL355_OFFSET_X_H_REG }, [chan_y] = { .data_reg = ADXL355_YDATA3_REG, .offset_reg = ADXL355_OFFSET_Y_H_REG }, [chan_z] = { .data_reg = ADXL355_ZDATA3_REG, .offset_reg = ADXL355_OFFSET_Z_H_REG }, }; struct adxl355_data { const struct adxl355_chip_info *chip_info; struct regmap *regmap; struct device *dev; struct mutex lock; /* lock to protect op_mode */ enum adxl355_op_mode op_mode; enum adxl355_odr odr; enum adxl355_hpf_3db hpf_3db; int calibbias[3]; int adxl355_hpf_3db_table[7][2]; struct iio_trigger *dready_trig; union { u8 transf_buf[3]; struct { u8 buf[14]; s64 ts; } buffer; } __aligned(IIO_DMA_MINALIGN); }; static int adxl355_set_op_mode(struct adxl355_data *data, enum adxl355_op_mode op_mode) { int ret; if (data->op_mode == op_mode) return 0; ret = regmap_update_bits(data->regmap, ADXL355_POWER_CTL_REG, ADXL355_POWER_CTL_MODE_MSK, op_mode); if (ret) return ret; data->op_mode = op_mode; return ret; } static int adxl355_data_rdy_trigger_set_state(struct iio_trigger *trig, bool state) { struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); struct adxl355_data *data = iio_priv(indio_dev); int ret; mutex_lock(&data->lock); ret = regmap_update_bits(data->regmap, ADXL355_POWER_CTL_REG, ADXL355_POWER_CTL_DRDY_MSK, FIELD_PREP(ADXL355_POWER_CTL_DRDY_MSK, state ? 0 : 1)); mutex_unlock(&data->lock); return ret; } static void adxl355_fill_3db_frequency_table(struct adxl355_data *data) { u32 multiplier; u64 div, rem; u64 odr; int i; odr = mul_u64_u32_shr(adxl355_odr_table[data->odr][0], MEGA, 0) + adxl355_odr_table[data->odr][1]; for (i = 0; i < ARRAY_SIZE(adxl355_hpf_3db_multipliers); i++) { multiplier = adxl355_hpf_3db_multipliers[i]; div = div64_u64_rem(mul_u64_u32_shr(odr, multiplier, 0), TERA * 100, &rem); data->adxl355_hpf_3db_table[i][0] = div; data->adxl355_hpf_3db_table[i][1] = div_u64(rem, MEGA * 100); } } static int adxl355_setup(struct adxl355_data *data) { unsigned int regval; int ret; ret = regmap_read(data->regmap, ADXL355_DEVID_AD_REG, ®val); if (ret) return ret; if (regval != ADXL355_DEVID_AD_VAL) { dev_err(data->dev, "Invalid ADI ID 0x%02x\n", regval); return -ENODEV; } ret = regmap_read(data->regmap, ADXL355_DEVID_MST_REG, ®val); if (ret) return ret; if (regval != ADXL355_DEVID_MST_VAL) { dev_err(data->dev, "Invalid MEMS ID 0x%02x\n", regval); return -ENODEV; } ret = regmap_read(data->regmap, ADXL355_PARTID_REG, ®val); if (ret) return ret; if (regval != ADXL355_PARTID_VAL) dev_warn(data->dev, "Invalid DEV ID 0x%02x\n", regval); /* * Perform a software reset to make sure the device is in a consistent * state after start-up. */ ret = regmap_write(data->regmap, ADXL355_RESET_REG, ADXL355_RESET_CODE); if (ret) return ret; ret = regmap_update_bits(data->regmap, ADXL355_POWER_CTL_REG, ADXL355_POWER_CTL_DRDY_MSK, FIELD_PREP(ADXL355_POWER_CTL_DRDY_MSK, 1)); if (ret) return ret; adxl355_fill_3db_frequency_table(data); return adxl355_set_op_mode(data, ADXL355_MEASUREMENT); } static int adxl355_get_temp_data(struct adxl355_data *data, u8 addr) { return regmap_bulk_read(data->regmap, addr, data->transf_buf, 2); } static int adxl355_read_axis(struct adxl355_data *data, u8 addr) { int ret; ret = regmap_bulk_read(data->regmap, addr, data->transf_buf, ARRAY_SIZE(data->transf_buf)); if (ret) return ret; return get_unaligned_be24(data->transf_buf); } static int adxl355_find_match(const int (*freq_tbl)[2], const int n, const int val, const int val2) { int i; for (i = 0; i < n; i++) { if (freq_tbl[i][0] == val && freq_tbl[i][1] == val2) return i; } return -EINVAL; } static int adxl355_set_odr(struct adxl355_data *data, enum adxl355_odr odr) { int ret; mutex_lock(&data->lock); if (data->odr == odr) { mutex_unlock(&data->lock); return 0; } ret = adxl355_set_op_mode(data, ADXL355_STANDBY); if (ret) goto err_unlock; ret = regmap_update_bits(data->regmap, ADXL355_FILTER_REG, ADXL355_FILTER_ODR_MSK, FIELD_PREP(ADXL355_FILTER_ODR_MSK, odr)); if (ret) goto err_set_opmode; data->odr = odr; adxl355_fill_3db_frequency_table(data); ret = adxl355_set_op_mode(data, ADXL355_MEASUREMENT); if (ret) goto err_set_opmode; mutex_unlock(&data->lock); return 0; err_set_opmode: adxl355_set_op_mode(data, ADXL355_MEASUREMENT); err_unlock: mutex_unlock(&data->lock); return ret; } static int adxl355_set_hpf_3db(struct adxl355_data *data, enum adxl355_hpf_3db hpf) { int ret; mutex_lock(&data->lock); if (data->hpf_3db == hpf) { mutex_unlock(&data->lock); return 0; } ret = adxl355_set_op_mode(data, ADXL355_STANDBY); if (ret) goto err_unlock; ret = regmap_update_bits(data->regmap, ADXL355_FILTER_REG, ADXL355_FILTER_HPF_MSK, FIELD_PREP(ADXL355_FILTER_HPF_MSK, hpf)); if (ret) goto err_set_opmode; data->hpf_3db = hpf; ret = adxl355_set_op_mode(data, ADXL355_MEASUREMENT); if (ret) goto err_set_opmode; mutex_unlock(&data->lock); return 0; err_set_opmode: adxl355_set_op_mode(data, ADXL355_MEASUREMENT); err_unlock: mutex_unlock(&data->lock); return ret; } static int adxl355_set_calibbias(struct adxl355_data *data, enum adxl355_chans chan, int calibbias) { int ret; mutex_lock(&data->lock); ret = adxl355_set_op_mode(data, ADXL355_STANDBY); if (ret) goto err_unlock; put_unaligned_be16(calibbias, data->transf_buf); ret = regmap_bulk_write(data->regmap, adxl355_chans[chan].offset_reg, data->transf_buf, 2); if (ret) goto err_set_opmode; data->calibbias[chan] = calibbias; ret = adxl355_set_op_mode(data, ADXL355_MEASUREMENT); if (ret) goto err_set_opmode; mutex_unlock(&data->lock); return 0; err_set_opmode: adxl355_set_op_mode(data, ADXL355_MEASUREMENT); err_unlock: mutex_unlock(&data->lock); return ret; } static int adxl355_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { struct adxl355_data *data = iio_priv(indio_dev); int ret; switch (mask) { case IIO_CHAN_INFO_RAW: switch (chan->type) { case IIO_TEMP: ret = adxl355_get_temp_data(data, chan->address); if (ret < 0) return ret; *val = get_unaligned_be16(data->transf_buf); return IIO_VAL_INT; case IIO_ACCEL: ret = adxl355_read_axis(data, adxl355_chans[ chan->address].data_reg); if (ret < 0) return ret; *val = sign_extend32(ret >> chan->scan_type.shift, chan->scan_type.realbits - 1); return IIO_VAL_INT; default: return -EINVAL; } case IIO_CHAN_INFO_SCALE: switch (chan->type) { case IIO_TEMP: /* * Temperature scale is -110.497238. * See the detailed explanation in adxl35x_chip_info * definition above. */ *val = -110; *val2 = 497238; return IIO_VAL_INT_PLUS_MICRO; case IIO_ACCEL: *val = data->chip_info->accel_scale.integer; *val2 = data->chip_info->accel_scale.decimal; return IIO_VAL_INT_PLUS_NANO; default: return -EINVAL; } case IIO_CHAN_INFO_OFFSET: *val = data->chip_info->temp_offset.integer; *val2 = data->chip_info->temp_offset.decimal; return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_CALIBBIAS: *val = sign_extend32(data->calibbias[chan->address], 15); return IIO_VAL_INT; case IIO_CHAN_INFO_SAMP_FREQ: *val = adxl355_odr_table[data->odr][0]; *val2 = adxl355_odr_table[data->odr][1]; return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: *val = data->adxl355_hpf_3db_table[data->hpf_3db][0]; *val2 = data->adxl355_hpf_3db_table[data->hpf_3db][1]; return IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; } } static int adxl355_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int val, int val2, long mask) { struct adxl355_data *data = iio_priv(indio_dev); int odr_idx, hpf_idx, calibbias; switch (mask) { case IIO_CHAN_INFO_SAMP_FREQ: odr_idx = adxl355_find_match(adxl355_odr_table, ARRAY_SIZE(adxl355_odr_table), val, val2); if (odr_idx < 0) return odr_idx; return adxl355_set_odr(data, odr_idx); case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: hpf_idx = adxl355_find_match(data->adxl355_hpf_3db_table, ARRAY_SIZE(data->adxl355_hpf_3db_table), val, val2); if (hpf_idx < 0) return hpf_idx; return adxl355_set_hpf_3db(data, hpf_idx); case IIO_CHAN_INFO_CALIBBIAS: calibbias = clamp_t(int, val, S16_MIN, S16_MAX); return adxl355_set_calibbias(data, chan->address, calibbias); default: return -EINVAL; } } static int adxl355_read_avail(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, const int **vals, int *type, int *length, long mask) { struct adxl355_data *data = iio_priv(indio_dev); switch (mask) { case IIO_CHAN_INFO_SAMP_FREQ: *vals = (const int *)adxl355_odr_table; *type = IIO_VAL_INT_PLUS_MICRO; /* Values are stored in a 2D matrix */ *length = ARRAY_SIZE(adxl355_odr_table) * 2; return IIO_AVAIL_LIST; case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: *vals = (const int *)data->adxl355_hpf_3db_table; *type = IIO_VAL_INT_PLUS_MICRO; /* Values are stored in a 2D matrix */ *length = ARRAY_SIZE(data->adxl355_hpf_3db_table) * 2; return IIO_AVAIL_LIST; default: return -EINVAL; } } static const unsigned long adxl355_avail_scan_masks[] = { GENMASK(3, 0), 0 }; static const struct iio_info adxl355_info = { .read_raw = adxl355_read_raw, .write_raw = adxl355_write_raw, .read_avail = &adxl355_read_avail, }; static const struct iio_trigger_ops adxl355_trigger_ops = { .set_trigger_state = &adxl355_data_rdy_trigger_set_state, .validate_device = &iio_trigger_validate_own_device, }; static irqreturn_t adxl355_trigger_handler(int irq, void *p) { struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct adxl355_data *data = iio_priv(indio_dev); int ret; mutex_lock(&data->lock); /* * data->buffer is used both for triggered buffer support * and read/write_raw(), hence, it has to be zeroed here before usage. */ data->buffer.buf[0] = 0; /* * The acceleration data is 24 bits and big endian. It has to be saved * in 32 bits, hence, it is saved in the 2nd byte of the 4 byte buffer. * The buf array is 14 bytes as it includes 3x4=12 bytes for * accelaration data of x, y, and z axis. It also includes 2 bytes for * temperature data. */ ret = regmap_bulk_read(data->regmap, ADXL355_XDATA3_REG, &data->buffer.buf[1], 3); if (ret) goto out_unlock_notify; ret = regmap_bulk_read(data->regmap, ADXL355_YDATA3_REG, &data->buffer.buf[5], 3); if (ret) goto out_unlock_notify; ret = regmap_bulk_read(data->regmap, ADXL355_ZDATA3_REG, &data->buffer.buf[9], 3); if (ret) goto out_unlock_notify; ret = regmap_bulk_read(data->regmap, ADXL355_TEMP2_REG, &data->buffer.buf[12], 2); if (ret) goto out_unlock_notify; iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer, pf->timestamp); out_unlock_notify: mutex_unlock(&data->lock); iio_trigger_notify_done(indio_dev->trig); return IRQ_HANDLED; } #define ADXL355_ACCEL_CHANNEL(index, reg, axis) { \ .type = IIO_ACCEL, \ .address = reg, \ .modified = 1, \ .channel2 = IIO_MOD_##axis, \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ BIT(IIO_CHAN_INFO_CALIBBIAS), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY), \ .info_mask_shared_by_type_available = \ BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY), \ .scan_index = index, \ .scan_type = { \ .sign = 's', \ .realbits = 20, \ .storagebits = 32, \ .shift = 4, \ .endianness = IIO_BE, \ } \ } static const struct iio_chan_spec adxl355_channels[] = { ADXL355_ACCEL_CHANNEL(0, chan_x, X), ADXL355_ACCEL_CHANNEL(1, chan_y, Y), ADXL355_ACCEL_CHANNEL(2, chan_z, Z), { .type = IIO_TEMP, .address = ADXL355_TEMP2_REG, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET), .scan_index = 3, .scan_type = { .sign = 's', .realbits = 12, .storagebits = 16, .endianness = IIO_BE, }, }, IIO_CHAN_SOFT_TIMESTAMP(4), }; static int adxl355_probe_trigger(struct iio_dev *indio_dev, int irq) { struct adxl355_data *data = iio_priv(indio_dev); int ret; data->dready_trig = devm_iio_trigger_alloc(data->dev, "%s-dev%d", indio_dev->name, iio_device_id(indio_dev)); if (!data->dready_trig) return -ENOMEM; data->dready_trig->ops = &adxl355_trigger_ops; iio_trigger_set_drvdata(data->dready_trig, indio_dev); ret = devm_request_irq(data->dev, irq, &iio_trigger_generic_data_rdy_poll, IRQF_ONESHOT, "adxl355_irq", data->dready_trig); if (ret) return dev_err_probe(data->dev, ret, "request irq %d failed\n", irq); ret = devm_iio_trigger_register(data->dev, data->dready_trig); if (ret) { dev_err(data->dev, "iio trigger register failed\n"); return ret; } indio_dev->trig = iio_trigger_get(data->dready_trig); return 0; } int adxl355_core_probe(struct device *dev, struct regmap *regmap, const struct adxl355_chip_info *chip_info) { struct adxl355_data *data; struct iio_dev *indio_dev; int ret; int irq; indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; data = iio_priv(indio_dev); data->regmap = regmap; data->dev = dev; data->op_mode = ADXL355_STANDBY; data->chip_info = chip_info; mutex_init(&data->lock); indio_dev->name = chip_info->name; indio_dev->info = &adxl355_info; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = adxl355_channels; indio_dev->num_channels = ARRAY_SIZE(adxl355_channels); indio_dev->available_scan_masks = adxl355_avail_scan_masks; ret = adxl355_setup(data); if (ret) { dev_err(dev, "ADXL355 setup failed\n"); return ret; } ret = devm_iio_triggered_buffer_setup(dev, indio_dev, &iio_pollfunc_store_time, &adxl355_trigger_handler, NULL); if (ret) { dev_err(dev, "iio triggered buffer setup failed\n"); return ret; } irq = fwnode_irq_get_byname(dev_fwnode(dev), "DRDY"); if (irq > 0) { ret = adxl355_probe_trigger(indio_dev, irq); if (ret) return ret; } return devm_iio_device_register(dev, indio_dev); } EXPORT_SYMBOL_NS_GPL(adxl355_core_probe, IIO_ADXL355); MODULE_AUTHOR("Puranjay Mohan <puranjay12@gmail.com>"); MODULE_DESCRIPTION("ADXL355 3-Axis Digital Accelerometer core driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1