| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Linus Walleij | 4946 | 98.49% | 1 | 12.50% |
| Nuno Sá | 54 | 1.08% | 1 | 12.50% |
| Linus Torvalds | 8 | 0.16% | 1 | 12.50% |
| Andy Shevchenko | 5 | 0.10% | 1 | 12.50% |
| caihuoqing | 3 | 0.06% | 1 | 12.50% |
| Dmitry Eremin-Solenikov | 3 | 0.06% | 1 | 12.50% |
| Lee Jones | 2 | 0.04% | 1 | 12.50% |
| Thomas Gleixner | 1 | 0.02% | 1 | 12.50% |
| Total | 5022 | 8 |
// SPDX-License-Identifier: GPL-2.0-only /* * Qualcomm PM8xxx PMIC XOADC driver * * These ADCs are known as HK/XO (house keeping / chrystal oscillator) * "XO" in "XOADC" means Chrystal Oscillator. It's a bunch of * specific-purpose and general purpose ADC converters and channels. * * Copyright (C) 2017 Linaro Ltd. * Author: Linus Walleij <linus.walleij@linaro.org> */ #include <linux/iio/adc/qcom-vadc-common.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> #include <linux/module.h> #include <linux/mod_devicetable.h> #include <linux/platform_device.h> #include <linux/property.h> #include <linux/regmap.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/regulator/consumer.h> /* * Definitions for the "user processor" registers lifted from the v3.4 * Qualcomm tree. Their kernel has two out-of-tree drivers for the ADC: * drivers/misc/pmic8058-xoadc.c * drivers/hwmon/pm8xxx-adc.c * None of them contain any complete register specification, so this is * a best effort of combining the information. */ /* These appear to be "battery monitor" registers */ #define ADC_ARB_BTM_CNTRL1 0x17e #define ADC_ARB_BTM_CNTRL1_EN_BTM BIT(0) #define ADC_ARB_BTM_CNTRL1_SEL_OP_MODE BIT(1) #define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL1 BIT(2) #define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL2 BIT(3) #define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL3 BIT(4) #define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL4 BIT(5) #define ADC_ARB_BTM_CNTRL1_EOC BIT(6) #define ADC_ARB_BTM_CNTRL1_REQ BIT(7) #define ADC_ARB_BTM_AMUX_CNTRL 0x17f #define ADC_ARB_BTM_ANA_PARAM 0x180 #define ADC_ARB_BTM_DIG_PARAM 0x181 #define ADC_ARB_BTM_RSV 0x182 #define ADC_ARB_BTM_DATA1 0x183 #define ADC_ARB_BTM_DATA0 0x184 #define ADC_ARB_BTM_BAT_COOL_THR1 0x185 #define ADC_ARB_BTM_BAT_COOL_THR0 0x186 #define ADC_ARB_BTM_BAT_WARM_THR1 0x187 #define ADC_ARB_BTM_BAT_WARM_THR0 0x188 #define ADC_ARB_BTM_CNTRL2 0x18c /* Proper ADC registers */ #define ADC_ARB_USRP_CNTRL 0x197 #define ADC_ARB_USRP_CNTRL_EN_ARB BIT(0) #define ADC_ARB_USRP_CNTRL_RSV1 BIT(1) #define ADC_ARB_USRP_CNTRL_RSV2 BIT(2) #define ADC_ARB_USRP_CNTRL_RSV3 BIT(3) #define ADC_ARB_USRP_CNTRL_RSV4 BIT(4) #define ADC_ARB_USRP_CNTRL_RSV5 BIT(5) #define ADC_ARB_USRP_CNTRL_EOC BIT(6) #define ADC_ARB_USRP_CNTRL_REQ BIT(7) #define ADC_ARB_USRP_AMUX_CNTRL 0x198 /* * The channel mask includes the bits selecting channel mux and prescaler * on PM8058, or channel mux and premux on PM8921. */ #define ADC_ARB_USRP_AMUX_CNTRL_CHAN_MASK 0xfc #define ADC_ARB_USRP_AMUX_CNTRL_RSV0 BIT(0) #define ADC_ARB_USRP_AMUX_CNTRL_RSV1 BIT(1) /* On PM8058 this is prescaling, on PM8921 this is premux */ #define ADC_ARB_USRP_AMUX_CNTRL_PRESCALEMUX0 BIT(2) #define ADC_ARB_USRP_AMUX_CNTRL_PRESCALEMUX1 BIT(3) #define ADC_ARB_USRP_AMUX_CNTRL_SEL0 BIT(4) #define ADC_ARB_USRP_AMUX_CNTRL_SEL1 BIT(5) #define ADC_ARB_USRP_AMUX_CNTRL_SEL2 BIT(6) #define ADC_ARB_USRP_AMUX_CNTRL_SEL3 BIT(7) #define ADC_AMUX_PREMUX_SHIFT 2 #define ADC_AMUX_SEL_SHIFT 4 /* We know very little about the bits in this register */ #define ADC_ARB_USRP_ANA_PARAM 0x199 #define ADC_ARB_USRP_ANA_PARAM_DIS 0xFE #define ADC_ARB_USRP_ANA_PARAM_EN 0xFF #define ADC_ARB_USRP_DIG_PARAM 0x19A #define ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT0 BIT(0) #define ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT1 BIT(1) #define ADC_ARB_USRP_DIG_PARAM_CLK_RATE0 BIT(2) #define ADC_ARB_USRP_DIG_PARAM_CLK_RATE1 BIT(3) #define ADC_ARB_USRP_DIG_PARAM_EOC BIT(4) /* * On a later ADC the decimation factors are defined as * 00 = 512, 01 = 1024, 10 = 2048, 11 = 4096 so assume this * holds also for this older XOADC. */ #define ADC_ARB_USRP_DIG_PARAM_DEC_RATE0 BIT(5) #define ADC_ARB_USRP_DIG_PARAM_DEC_RATE1 BIT(6) #define ADC_ARB_USRP_DIG_PARAM_EN BIT(7) #define ADC_DIG_PARAM_DEC_SHIFT 5 #define ADC_ARB_USRP_RSV 0x19B #define ADC_ARB_USRP_RSV_RST BIT(0) #define ADC_ARB_USRP_RSV_DTEST0 BIT(1) #define ADC_ARB_USRP_RSV_DTEST1 BIT(2) #define ADC_ARB_USRP_RSV_OP BIT(3) #define ADC_ARB_USRP_RSV_IP_SEL0 BIT(4) #define ADC_ARB_USRP_RSV_IP_SEL1 BIT(5) #define ADC_ARB_USRP_RSV_IP_SEL2 BIT(6) #define ADC_ARB_USRP_RSV_TRM BIT(7) #define ADC_RSV_IP_SEL_SHIFT 4 #define ADC_ARB_USRP_DATA0 0x19D #define ADC_ARB_USRP_DATA1 0x19C /* * Physical channels which MUST exist on all PM variants in order to provide * proper reference points for calibration. * * @PM8XXX_CHANNEL_INTERNAL: 625mV reference channel * @PM8XXX_CHANNEL_125V: 1250mV reference channel * @PM8XXX_CHANNEL_INTERNAL_2: 325mV reference channel * @PM8XXX_CHANNEL_MUXOFF: channel to reduce input load on mux, apparently also * measures XO temperature */ #define PM8XXX_CHANNEL_INTERNAL 0x0c #define PM8XXX_CHANNEL_125V 0x0d #define PM8XXX_CHANNEL_INTERNAL_2 0x0e #define PM8XXX_CHANNEL_MUXOFF 0x0f /* * PM8058 AMUX premux scaling, two bits. This is done of the channel before * reaching the AMUX. */ #define PM8058_AMUX_PRESCALE_0 0x0 /* No scaling on the signal */ #define PM8058_AMUX_PRESCALE_1 0x1 /* Unity scaling selected by the user */ #define PM8058_AMUX_PRESCALE_1_DIV3 0x2 /* 1/3 prescaler on the input */ /* Defines reference voltage for the XOADC */ #define AMUX_RSV0 0x0 /* XO_IN/XOADC_GND, special selection to read XO temp */ #define AMUX_RSV1 0x1 /* PMIC_IN/XOADC_GND */ #define AMUX_RSV2 0x2 /* PMIC_IN/BMS_CSP */ #define AMUX_RSV3 0x3 /* not used */ #define AMUX_RSV4 0x4 /* XOADC_GND/XOADC_GND */ #define AMUX_RSV5 0x5 /* XOADC_VREF/XOADC_GND */ #define XOADC_RSV_MAX 5 /* 3 bits 0..7, 3 and 6,7 are invalid */ /** * struct xoadc_channel - encodes channel properties and defaults * @datasheet_name: the hardwarename of this channel * @pre_scale_mux: prescale (PM8058) or premux (PM8921) for selecting * this channel. Both this and the amux channel is needed to uniquely * identify a channel. Values 0..3. * @amux_channel: value of the ADC_ARB_USRP_AMUX_CNTRL register for this * channel, bits 4..7, selects the amux, values 0..f * @prescale: the channels have hard-coded prescale ratios defined * by the hardware, this tells us what it is * @type: corresponding IIO channel type, usually IIO_VOLTAGE or * IIO_TEMP * @scale_fn_type: the liner interpolation etc to convert the * ADC code to the value that IIO expects, in uV or millicelsius * etc. This scale function can be pretty elaborate if different * thermistors are connected or other hardware characteristics are * deployed. * @amux_ip_rsv: ratiometric scale value used by the analog muxer: this * selects the reference voltage for ratiometric scaling */ struct xoadc_channel { const char *datasheet_name; u8 pre_scale_mux:2; u8 amux_channel:4; const struct u32_fract prescale; enum iio_chan_type type; enum vadc_scale_fn_type scale_fn_type; u8 amux_ip_rsv:3; }; /** * struct xoadc_variant - encodes the XOADC variant characteristics * @name: name of this PMIC variant * @channels: the hardware channels and respective settings and defaults * @broken_ratiometric: if the PMIC has broken ratiometric scaling (this * is a known problem on PM8058) * @prescaling: this variant uses AMUX bits 2 & 3 for prescaling (PM8058) * @second_level_mux: this variant uses AMUX bits 2 & 3 for a second level * mux */ struct xoadc_variant { const char name[16]; const struct xoadc_channel *channels; bool broken_ratiometric; bool prescaling; bool second_level_mux; }; /* * XOADC_CHAN macro parameters: * _dname: the name of the channel * _presmux: prescaler (PM8058) or premux (PM8921) setting for this channel * _amux: the value in bits 2..7 of the ADC_ARB_USRP_AMUX_CNTRL register * for this channel. On some PMICs some of the bits select a prescaler, and * on some PMICs some of the bits select various complex multiplex settings. * _type: IIO channel type * _prenum: prescaler numerator (dividend) * _preden: prescaler denominator (divisor) * _scale: scaling function type, this selects how the raw valued is mangled * to output the actual processed measurement * _amip: analog mux input parent when using ratiometric measurements */ #define XOADC_CHAN(_dname, _presmux, _amux, _type, _prenum, _preden, _scale, _amip) \ { \ .datasheet_name = __stringify(_dname), \ .pre_scale_mux = _presmux, \ .amux_channel = _amux, \ .prescale = { \ .numerator = _prenum, .denominator = _preden, \ }, \ .type = _type, \ .scale_fn_type = _scale, \ .amux_ip_rsv = _amip, \ } /* * Taken from arch/arm/mach-msm/board-9615.c in the vendor tree: * TODO: incomplete, needs testing. */ static const struct xoadc_channel pm8018_xoadc_channels[] = { XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(VPH_PWR, 0x00, 0x02, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1), /* Used for battery ID or battery temperature */ XOADC_CHAN(AMUX8, 0x00, 0x08, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV2), XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0), { }, /* Sentinel */ }; /* * Taken from arch/arm/mach-msm/board-8930-pmic.c in the vendor tree: * TODO: needs testing. */ static const struct xoadc_channel pm8038_xoadc_channels[] = { XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(DCIN, 0x00, 0x02, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(ICHG, 0x00, 0x03, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(VPH_PWR, 0x00, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(AMUX5, 0x00, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(AMUX6, 0x00, 0x06, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(AMUX7, 0x00, 0x07, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), /* AMUX8 used for battery temperature in most cases */ XOADC_CHAN(AMUX8, 0x00, 0x08, IIO_TEMP, 1, 1, SCALE_THERM_100K_PULLUP, AMUX_RSV2), XOADC_CHAN(AMUX9, 0x00, 0x09, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(USB_VBUS, 0x00, 0x0a, IIO_VOLTAGE, 1, 4, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1), XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(INTERNAL_2, 0x00, 0x0e, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0), { }, /* Sentinel */ }; /* * This was created by cross-referencing the vendor tree * arch/arm/mach-msm/board-msm8x60.c msm_adc_channels_data[] * with the "channel types" (first field) to find the right * configuration for these channels on an MSM8x60 i.e. PM8058 * setup. */ static const struct xoadc_channel pm8058_xoadc_channels[] = { XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(DCIN, 0x00, 0x02, IIO_VOLTAGE, 1, 10, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(ICHG, 0x00, 0x03, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(VPH_PWR, 0x00, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), /* * AMUX channels 5 thru 9 are referred to as MPP5 thru MPP9 in * some code and documentation. But they are really just 5 * channels just like any other. They are connected to a switching * matrix where they can be routed to any of the MPPs, not just * 1-to-1 onto MPP5 thru 9, so naming them MPP5 thru MPP9 is * very confusing. */ XOADC_CHAN(AMUX5, 0x00, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(AMUX6, 0x00, 0x06, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(AMUX7, 0x00, 0x07, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(AMUX8, 0x00, 0x08, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(AMUX9, 0x00, 0x09, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(USB_VBUS, 0x00, 0x0a, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1), XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(INTERNAL_2, 0x00, 0x0e, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0), /* There are also "unity" and divided by 3 channels (prescaler) but noone is using them */ { }, /* Sentinel */ }; /* * The PM8921 has some pre-muxing on its channels, this comes from the vendor tree * include/linux/mfd/pm8xxx/pm8xxx-adc.h * board-flo-pmic.c (Nexus 7) and board-8064-pmic.c */ static const struct xoadc_channel pm8921_xoadc_channels[] = { XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(DCIN, 0x00, 0x02, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1), /* channel "ICHG" is reserved and not used on PM8921 */ XOADC_CHAN(VPH_PWR, 0x00, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(IBAT, 0x00, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), /* CHAN 6 & 7 (MPP1 & MPP2) are reserved for MPP channels on PM8921 */ XOADC_CHAN(BATT_THERM, 0x00, 0x08, IIO_TEMP, 1, 1, SCALE_THERM_100K_PULLUP, AMUX_RSV1), XOADC_CHAN(BATT_ID, 0x00, 0x09, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(USB_VBUS, 0x00, 0x0a, IIO_VOLTAGE, 1, 4, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1), XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), /* FIXME: look into the scaling of this temperature */ XOADC_CHAN(CHG_TEMP, 0x00, 0x0e, IIO_TEMP, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0), /* The following channels have premux bit 0 set to 1 (all end in 4) */ XOADC_CHAN(ATEST_8, 0x01, 0x00, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), /* Set scaling to 1/2 based on the name for these two */ XOADC_CHAN(USB_SNS_DIV20, 0x01, 0x01, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(DCIN_SNS_DIV20, 0x01, 0x02, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(AMUX3, 0x01, 0x03, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(AMUX4, 0x01, 0x04, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(AMUX5, 0x01, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(AMUX6, 0x01, 0x06, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(AMUX7, 0x01, 0x07, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(AMUX8, 0x01, 0x08, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), /* Internal test signals, I think */ XOADC_CHAN(ATEST_1, 0x01, 0x09, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(ATEST_2, 0x01, 0x0a, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(ATEST_3, 0x01, 0x0b, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(ATEST_4, 0x01, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(ATEST_5, 0x01, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(ATEST_6, 0x01, 0x0e, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(ATEST_7, 0x01, 0x0f, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), /* The following channels have premux bit 1 set to 1 (all end in 8) */ /* I guess even ATEST8 will be divided by 3 here */ XOADC_CHAN(ATEST_8, 0x02, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), /* I guess div 2 div 3 becomes div 6 */ XOADC_CHAN(USB_SNS_DIV20_DIV3, 0x02, 0x01, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(DCIN_SNS_DIV20_DIV3, 0x02, 0x02, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(AMUX3_DIV3, 0x02, 0x03, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(AMUX4_DIV3, 0x02, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(AMUX5_DIV3, 0x02, 0x05, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(AMUX6_DIV3, 0x02, 0x06, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(AMUX7_DIV3, 0x02, 0x07, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(AMUX8_DIV3, 0x02, 0x08, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(ATEST_1_DIV3, 0x02, 0x09, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(ATEST_2_DIV3, 0x02, 0x0a, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(ATEST_3_DIV3, 0x02, 0x0b, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(ATEST_4_DIV3, 0x02, 0x0c, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(ATEST_5_DIV3, 0x02, 0x0d, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(ATEST_6_DIV3, 0x02, 0x0e, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), XOADC_CHAN(ATEST_7_DIV3, 0x02, 0x0f, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), { }, /* Sentinel */ }; /** * struct pm8xxx_chan_info - ADC channel information * @name: name of this channel * @hwchan: pointer to hardware channel information (muxing & scaling settings) * @calibration: whether to use absolute or ratiometric calibration * @scale_fn_type: scaling function type * @decimation: 0,1,2,3 * @amux_ip_rsv: ratiometric scale value if using ratiometric * calibration: 0, 1, 2, 4, 5. */ struct pm8xxx_chan_info { const char *name; const struct xoadc_channel *hwchan; enum vadc_calibration calibration; u8 decimation:2; u8 amux_ip_rsv:3; }; /** * struct pm8xxx_xoadc - state container for the XOADC * @dev: pointer to device * @map: regmap to access registers * @variant: XOADC variant characteristics * @vref: reference voltage regulator * characteristics of the channels, and sensible default settings * @nchans: number of channels, configured by the device tree * @chans: the channel information per-channel, configured by the device tree * @iio_chans: IIO channel specifiers * @graph: linear calibration parameters for absolute and * ratiometric measurements * @complete: completion to indicate end of conversion * @lock: lock to restrict access to the hardware to one client at the time */ struct pm8xxx_xoadc { struct device *dev; struct regmap *map; const struct xoadc_variant *variant; struct regulator *vref; unsigned int nchans; struct pm8xxx_chan_info *chans; struct iio_chan_spec *iio_chans; struct vadc_linear_graph graph[2]; struct completion complete; struct mutex lock; }; static irqreturn_t pm8xxx_eoc_irq(int irq, void *d) { struct iio_dev *indio_dev = d; struct pm8xxx_xoadc *adc = iio_priv(indio_dev); complete(&adc->complete); return IRQ_HANDLED; } static struct pm8xxx_chan_info * pm8xxx_get_channel(struct pm8xxx_xoadc *adc, u8 chan) { int i; for (i = 0; i < adc->nchans; i++) { struct pm8xxx_chan_info *ch = &adc->chans[i]; if (ch->hwchan->amux_channel == chan) return ch; } return NULL; } static int pm8xxx_read_channel_rsv(struct pm8xxx_xoadc *adc, const struct pm8xxx_chan_info *ch, u8 rsv, u16 *adc_code, bool force_ratiometric) { int ret; unsigned int val; u8 rsvmask, rsvval; u8 lsb, msb; dev_dbg(adc->dev, "read channel \"%s\", amux %d, prescale/mux: %d, rsv %d\n", ch->name, ch->hwchan->amux_channel, ch->hwchan->pre_scale_mux, rsv); mutex_lock(&adc->lock); /* Mux in this channel */ val = ch->hwchan->amux_channel << ADC_AMUX_SEL_SHIFT; val |= ch->hwchan->pre_scale_mux << ADC_AMUX_PREMUX_SHIFT; ret = regmap_write(adc->map, ADC_ARB_USRP_AMUX_CNTRL, val); if (ret) goto unlock; /* Set up ratiometric scale value, mask off all bits except these */ rsvmask = (ADC_ARB_USRP_RSV_RST | ADC_ARB_USRP_RSV_DTEST0 | ADC_ARB_USRP_RSV_DTEST1 | ADC_ARB_USRP_RSV_OP); if (adc->variant->broken_ratiometric && !force_ratiometric) { /* * Apparently the PM8058 has some kind of bug which is * reflected in the vendor tree drivers/misc/pmix8058-xoadc.c * which just hardcodes the RSV selector to SEL1 (0x20) for * most cases and SEL0 (0x10) for the MUXOFF channel only. * If we force ratiometric (currently only done when attempting * to do ratiometric calibration) this doesn't seem to work * very well and I suspect ratiometric conversion is simply * broken or not supported on the PM8058. * * Maybe IO_SEL2 doesn't exist on PM8058 and bits 4 & 5 select * the mode alone. * * Some PM8058 register documentation would be nice to get * this right. */ if (ch->hwchan->amux_channel == PM8XXX_CHANNEL_MUXOFF) rsvval = ADC_ARB_USRP_RSV_IP_SEL0; else rsvval = ADC_ARB_USRP_RSV_IP_SEL1; } else { if (rsv == 0xff) rsvval = (ch->amux_ip_rsv << ADC_RSV_IP_SEL_SHIFT) | ADC_ARB_USRP_RSV_TRM; else rsvval = (rsv << ADC_RSV_IP_SEL_SHIFT) | ADC_ARB_USRP_RSV_TRM; } ret = regmap_update_bits(adc->map, ADC_ARB_USRP_RSV, ~rsvmask, rsvval); if (ret) goto unlock; ret = regmap_write(adc->map, ADC_ARB_USRP_ANA_PARAM, ADC_ARB_USRP_ANA_PARAM_DIS); if (ret) goto unlock; /* Decimation factor */ ret = regmap_write(adc->map, ADC_ARB_USRP_DIG_PARAM, ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT0 | ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT1 | ch->decimation << ADC_DIG_PARAM_DEC_SHIFT); if (ret) goto unlock; ret = regmap_write(adc->map, ADC_ARB_USRP_ANA_PARAM, ADC_ARB_USRP_ANA_PARAM_EN); if (ret) goto unlock; /* Enable the arbiter, the Qualcomm code does it twice like this */ ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, ADC_ARB_USRP_CNTRL_EN_ARB); if (ret) goto unlock; ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, ADC_ARB_USRP_CNTRL_EN_ARB); if (ret) goto unlock; /* Fire a request! */ reinit_completion(&adc->complete); ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, ADC_ARB_USRP_CNTRL_EN_ARB | ADC_ARB_USRP_CNTRL_REQ); if (ret) goto unlock; /* Next the interrupt occurs */ ret = wait_for_completion_timeout(&adc->complete, VADC_CONV_TIME_MAX_US); if (!ret) { dev_err(adc->dev, "conversion timed out\n"); ret = -ETIMEDOUT; goto unlock; } ret = regmap_read(adc->map, ADC_ARB_USRP_DATA0, &val); if (ret) goto unlock; lsb = val; ret = regmap_read(adc->map, ADC_ARB_USRP_DATA1, &val); if (ret) goto unlock; msb = val; *adc_code = (msb << 8) | lsb; /* Turn off the ADC by setting the arbiter to 0 twice */ ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, 0); if (ret) goto unlock; ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, 0); if (ret) goto unlock; unlock: mutex_unlock(&adc->lock); return ret; } static int pm8xxx_read_channel(struct pm8xxx_xoadc *adc, const struct pm8xxx_chan_info *ch, u16 *adc_code) { /* * Normally we just use the ratiometric scale value (RSV) predefined * for the channel, but during calibration we need to modify this * so this wrapper is a helper hiding the more complex version. */ return pm8xxx_read_channel_rsv(adc, ch, 0xff, adc_code, false); } static int pm8xxx_calibrate_device(struct pm8xxx_xoadc *adc) { const struct pm8xxx_chan_info *ch; u16 read_1250v; u16 read_0625v; u16 read_nomux_rsv5; u16 read_nomux_rsv4; int ret; adc->graph[VADC_CALIB_ABSOLUTE].dx = VADC_ABSOLUTE_RANGE_UV; adc->graph[VADC_CALIB_RATIOMETRIC].dx = VADC_RATIOMETRIC_RANGE; /* Common reference channel calibration */ ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_125V); if (!ch) return -ENODEV; ret = pm8xxx_read_channel(adc, ch, &read_1250v); if (ret) { dev_err(adc->dev, "could not read 1.25V reference channel\n"); return -ENODEV; } ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_INTERNAL); if (!ch) return -ENODEV; ret = pm8xxx_read_channel(adc, ch, &read_0625v); if (ret) { dev_err(adc->dev, "could not read 0.625V reference channel\n"); return -ENODEV; } if (read_1250v == read_0625v) { dev_err(adc->dev, "read same ADC code for 1.25V and 0.625V\n"); return -ENODEV; } adc->graph[VADC_CALIB_ABSOLUTE].dy = read_1250v - read_0625v; adc->graph[VADC_CALIB_ABSOLUTE].gnd = read_0625v; dev_info(adc->dev, "absolute calibration dx = %d uV, dy = %d units\n", VADC_ABSOLUTE_RANGE_UV, adc->graph[VADC_CALIB_ABSOLUTE].dy); /* Ratiometric calibration */ ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_MUXOFF); if (!ch) return -ENODEV; ret = pm8xxx_read_channel_rsv(adc, ch, AMUX_RSV5, &read_nomux_rsv5, true); if (ret) { dev_err(adc->dev, "could not read MUXOFF reference channel\n"); return -ENODEV; } ret = pm8xxx_read_channel_rsv(adc, ch, AMUX_RSV4, &read_nomux_rsv4, true); if (ret) { dev_err(adc->dev, "could not read MUXOFF reference channel\n"); return -ENODEV; } adc->graph[VADC_CALIB_RATIOMETRIC].dy = read_nomux_rsv5 - read_nomux_rsv4; adc->graph[VADC_CALIB_RATIOMETRIC].gnd = read_nomux_rsv4; dev_info(adc->dev, "ratiometric calibration dx = %d, dy = %d units\n", VADC_RATIOMETRIC_RANGE, adc->graph[VADC_CALIB_RATIOMETRIC].dy); return 0; } static int pm8xxx_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { struct pm8xxx_xoadc *adc = iio_priv(indio_dev); const struct pm8xxx_chan_info *ch; u16 adc_code; int ret; switch (mask) { case IIO_CHAN_INFO_PROCESSED: ch = pm8xxx_get_channel(adc, chan->address); if (!ch) { dev_err(adc->dev, "no such channel %lu\n", chan->address); return -EINVAL; } ret = pm8xxx_read_channel(adc, ch, &adc_code); if (ret) return ret; ret = qcom_vadc_scale(ch->hwchan->scale_fn_type, &adc->graph[ch->calibration], &ch->hwchan->prescale, (ch->calibration == VADC_CALIB_ABSOLUTE), adc_code, val); if (ret) return ret; return IIO_VAL_INT; case IIO_CHAN_INFO_RAW: ch = pm8xxx_get_channel(adc, chan->address); if (!ch) { dev_err(adc->dev, "no such channel %lu\n", chan->address); return -EINVAL; } ret = pm8xxx_read_channel(adc, ch, &adc_code); if (ret) return ret; *val = (int)adc_code; return IIO_VAL_INT; default: return -EINVAL; } } static int pm8xxx_fwnode_xlate(struct iio_dev *indio_dev, const struct fwnode_reference_args *iiospec) { struct pm8xxx_xoadc *adc = iio_priv(indio_dev); u8 pre_scale_mux; u8 amux_channel; unsigned int i; /* * First cell is prescaler or premux, second cell is analog * mux. */ if (iiospec->nargs != 2) { dev_err(&indio_dev->dev, "wrong number of arguments for %pfwP need 2 got %d\n", iiospec->fwnode, iiospec->nargs); return -EINVAL; } pre_scale_mux = (u8)iiospec->args[0]; amux_channel = (u8)iiospec->args[1]; dev_dbg(&indio_dev->dev, "pre scale/mux: %02x, amux: %02x\n", pre_scale_mux, amux_channel); /* We need to match exactly on the prescale/premux and channel */ for (i = 0; i < adc->nchans; i++) if (adc->chans[i].hwchan->pre_scale_mux == pre_scale_mux && adc->chans[i].hwchan->amux_channel == amux_channel) return i; return -EINVAL; } static const struct iio_info pm8xxx_xoadc_info = { .fwnode_xlate = pm8xxx_fwnode_xlate, .read_raw = pm8xxx_read_raw, }; static int pm8xxx_xoadc_parse_channel(struct device *dev, struct fwnode_handle *fwnode, const struct xoadc_channel *hw_channels, struct iio_chan_spec *iio_chan, struct pm8xxx_chan_info *ch) { const char *name = fwnode_get_name(fwnode); const struct xoadc_channel *hwchan; u32 pre_scale_mux, amux_channel, reg[2]; u32 rsv, dec; int ret; int chid; ret = fwnode_property_read_u32_array(fwnode, "reg", reg, ARRAY_SIZE(reg)); if (ret) { dev_err(dev, "invalid pre scale/mux or amux channel number %s\n", name); return ret; } pre_scale_mux = reg[0]; amux_channel = reg[1]; /* Find the right channel setting */ chid = 0; hwchan = &hw_channels[0]; while (hwchan && hwchan->datasheet_name) { if (hwchan->pre_scale_mux == pre_scale_mux && hwchan->amux_channel == amux_channel) break; hwchan++; chid++; } /* The sentinel does not have a name assigned */ if (!hwchan->datasheet_name) { dev_err(dev, "could not locate channel %02x/%02x\n", pre_scale_mux, amux_channel); return -EINVAL; } ch->name = name; ch->hwchan = hwchan; /* Everyone seems to use absolute calibration except in special cases */ ch->calibration = VADC_CALIB_ABSOLUTE; /* Everyone seems to use default ("type 2") decimation */ ch->decimation = VADC_DEF_DECIMATION; if (!fwnode_property_read_u32(fwnode, "qcom,ratiometric", &rsv)) { ch->calibration = VADC_CALIB_RATIOMETRIC; if (rsv > XOADC_RSV_MAX) { dev_err(dev, "%s too large RSV value %d\n", name, rsv); return -EINVAL; } if (rsv == AMUX_RSV3) { dev_err(dev, "%s invalid RSV value %d\n", name, rsv); return -EINVAL; } } /* Optional decimation, if omitted we use the default */ ret = fwnode_property_read_u32(fwnode, "qcom,decimation", &dec); if (!ret) { ret = qcom_vadc_decimation_from_dt(dec); if (ret < 0) { dev_err(dev, "%s invalid decimation %d\n", name, dec); return ret; } ch->decimation = ret; } iio_chan->channel = chid; iio_chan->address = hwchan->amux_channel; iio_chan->datasheet_name = hwchan->datasheet_name; iio_chan->type = hwchan->type; /* All channels are raw or processed */ iio_chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_PROCESSED); iio_chan->indexed = 1; dev_dbg(dev, "channel [PRESCALE/MUX: %02x AMUX: %02x] \"%s\" ref voltage: %d, decimation %d prescale %d/%d, scale function %d\n", hwchan->pre_scale_mux, hwchan->amux_channel, ch->name, ch->amux_ip_rsv, ch->decimation, hwchan->prescale.numerator, hwchan->prescale.denominator, hwchan->scale_fn_type); return 0; } static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc) { struct fwnode_handle *child; struct pm8xxx_chan_info *ch; int ret; int i; adc->nchans = device_get_child_node_count(adc->dev); if (!adc->nchans) { dev_err(adc->dev, "no channel children\n"); return -ENODEV; } dev_dbg(adc->dev, "found %d ADC channels\n", adc->nchans); adc->iio_chans = devm_kcalloc(adc->dev, adc->nchans, sizeof(*adc->iio_chans), GFP_KERNEL); if (!adc->iio_chans) return -ENOMEM; adc->chans = devm_kcalloc(adc->dev, adc->nchans, sizeof(*adc->chans), GFP_KERNEL); if (!adc->chans) return -ENOMEM; i = 0; device_for_each_child_node(adc->dev, child) { ch = &adc->chans[i]; ret = pm8xxx_xoadc_parse_channel(adc->dev, child, adc->variant->channels, &adc->iio_chans[i], ch); if (ret) { fwnode_handle_put(child); return ret; } i++; } /* Check for required channels */ ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_125V); if (!ch) { dev_err(adc->dev, "missing 1.25V reference channel\n"); return -ENODEV; } ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_INTERNAL); if (!ch) { dev_err(adc->dev, "missing 0.625V reference channel\n"); return -ENODEV; } ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_MUXOFF); if (!ch) { dev_err(adc->dev, "missing MUXOFF reference channel\n"); return -ENODEV; } return 0; } static int pm8xxx_xoadc_probe(struct platform_device *pdev) { const struct xoadc_variant *variant; struct pm8xxx_xoadc *adc; struct iio_dev *indio_dev; struct regmap *map; struct device *dev = &pdev->dev; int ret; variant = device_get_match_data(dev); if (!variant) return -ENODEV; indio_dev = devm_iio_device_alloc(dev, sizeof(*adc)); if (!indio_dev) return -ENOMEM; platform_set_drvdata(pdev, indio_dev); adc = iio_priv(indio_dev); adc->dev = dev; adc->variant = variant; init_completion(&adc->complete); mutex_init(&adc->lock); ret = pm8xxx_xoadc_parse_channels(adc); if (ret) return ret; map = dev_get_regmap(dev->parent, NULL); if (!map) { dev_err(dev, "parent regmap unavailable.\n"); return -ENODEV; } adc->map = map; /* Bring up regulator */ adc->vref = devm_regulator_get(dev, "xoadc-ref"); if (IS_ERR(adc->vref)) return dev_err_probe(dev, PTR_ERR(adc->vref), "failed to get XOADC VREF regulator\n"); ret = regulator_enable(adc->vref); if (ret) { dev_err(dev, "failed to enable XOADC VREF regulator\n"); return ret; } ret = devm_request_threaded_irq(dev, platform_get_irq(pdev, 0), pm8xxx_eoc_irq, NULL, 0, variant->name, indio_dev); if (ret) { dev_err(dev, "unable to request IRQ\n"); goto out_disable_vref; } indio_dev->name = variant->name; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &pm8xxx_xoadc_info; indio_dev->channels = adc->iio_chans; indio_dev->num_channels = adc->nchans; ret = iio_device_register(indio_dev); if (ret) goto out_disable_vref; ret = pm8xxx_calibrate_device(adc); if (ret) goto out_unreg_device; dev_info(dev, "%s XOADC driver enabled\n", variant->name); return 0; out_unreg_device: iio_device_unregister(indio_dev); out_disable_vref: regulator_disable(adc->vref); return ret; } static int pm8xxx_xoadc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct pm8xxx_xoadc *adc = iio_priv(indio_dev); iio_device_unregister(indio_dev); regulator_disable(adc->vref); return 0; } static const struct xoadc_variant pm8018_variant = { .name = "PM8018-XOADC", .channels = pm8018_xoadc_channels, }; static const struct xoadc_variant pm8038_variant = { .name = "PM8038-XOADC", .channels = pm8038_xoadc_channels, }; static const struct xoadc_variant pm8058_variant = { .name = "PM8058-XOADC", .channels = pm8058_xoadc_channels, .broken_ratiometric = true, .prescaling = true, }; static const struct xoadc_variant pm8921_variant = { .name = "PM8921-XOADC", .channels = pm8921_xoadc_channels, .second_level_mux = true, }; static const struct of_device_id pm8xxx_xoadc_id_table[] = { { .compatible = "qcom,pm8018-adc", .data = &pm8018_variant, }, { .compatible = "qcom,pm8038-adc", .data = &pm8038_variant, }, { .compatible = "qcom,pm8058-adc", .data = &pm8058_variant, }, { .compatible = "qcom,pm8921-adc", .data = &pm8921_variant, }, { }, }; MODULE_DEVICE_TABLE(of, pm8xxx_xoadc_id_table); static struct platform_driver pm8xxx_xoadc_driver = { .driver = { .name = "pm8xxx-adc", .of_match_table = pm8xxx_xoadc_id_table, }, .probe = pm8xxx_xoadc_probe, .remove = pm8xxx_xoadc_remove, }; module_platform_driver(pm8xxx_xoadc_driver); MODULE_DESCRIPTION("PM8xxx XOADC driver"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:pm8xxx-xoadc");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1