Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Jonathan Cameron | 1747 | 67.35% | 32 | 58.18% |
Barry Song | 543 | 20.93% | 1 | 1.82% |
Lars-Peter Clausen | 205 | 7.90% | 4 | 7.27% |
Melissa Wen | 24 | 0.93% | 3 | 5.45% |
Sachin Kamat | 21 | 0.81% | 1 | 1.82% |
Bárbara Fernandes | 11 | 0.42% | 1 | 1.82% |
Uwe Kleine-König | 9 | 0.35% | 1 | 1.82% |
Ioana Ciornei | 8 | 0.31% | 2 | 3.64% |
Slawomir Stepien | 7 | 0.27% | 1 | 1.82% |
Michael Hennerich | 7 | 0.27% | 2 | 3.64% |
Grégor Boirie | 3 | 0.12% | 1 | 1.82% |
Shraddha Barke | 3 | 0.12% | 1 | 1.82% |
Paul Gortmaker | 2 | 0.08% | 1 | 1.82% |
Greg Kroah-Hartman | 1 | 0.04% | 1 | 1.82% |
Bhumika Goyal | 1 | 0.04% | 1 | 1.82% |
Pan Bian | 1 | 0.04% | 1 | 1.82% |
Cristina Moraru | 1 | 0.04% | 1 | 1.82% |
Total | 2594 | 55 |
// SPDX-License-Identifier: GPL-2.0+ /* * AD7150 capacitive sensor driver supporting AD7150/1/6 * * Copyright 2010-2011 Analog Devices Inc. * Copyright 2021 Jonathan Cameron <Jonathan.Cameron@huawei.com> */ #include <linux/bitfield.h> #include <linux/device.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/i2c.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/mod_devicetable.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> #include <linux/iio/events.h> #define AD7150_STATUS_REG 0 #define AD7150_STATUS_OUT1 BIT(3) #define AD7150_STATUS_OUT2 BIT(5) #define AD7150_CH1_DATA_HIGH_REG 1 #define AD7150_CH2_DATA_HIGH_REG 3 #define AD7150_CH1_AVG_HIGH_REG 5 #define AD7150_CH2_AVG_HIGH_REG 7 #define AD7150_CH1_SENSITIVITY_REG 9 #define AD7150_CH1_THR_HOLD_H_REG 9 #define AD7150_CH1_TIMEOUT_REG 10 #define AD7150_CH_TIMEOUT_RECEDING GENMASK(3, 0) #define AD7150_CH_TIMEOUT_APPROACHING GENMASK(7, 4) #define AD7150_CH1_SETUP_REG 11 #define AD7150_CH2_SENSITIVITY_REG 12 #define AD7150_CH2_THR_HOLD_H_REG 12 #define AD7150_CH2_TIMEOUT_REG 13 #define AD7150_CH2_SETUP_REG 14 #define AD7150_CFG_REG 15 #define AD7150_CFG_FIX BIT(7) #define AD7150_CFG_THRESHTYPE_MSK GENMASK(6, 5) #define AD7150_CFG_TT_NEG 0x0 #define AD7150_CFG_TT_POS 0x1 #define AD7150_CFG_TT_IN_WINDOW 0x2 #define AD7150_CFG_TT_OUT_WINDOW 0x3 #define AD7150_PD_TIMER_REG 16 #define AD7150_CH1_CAPDAC_REG 17 #define AD7150_CH2_CAPDAC_REG 18 #define AD7150_SN3_REG 19 #define AD7150_SN2_REG 20 #define AD7150_SN1_REG 21 #define AD7150_SN0_REG 22 #define AD7150_ID_REG 23 enum { AD7150, AD7151, }; /** * struct ad7150_chip_info - instance specific chip data * @client: i2c client for this device * @threshold: thresholds for simple capacitance value events * @thresh_sensitivity: threshold for simple capacitance offset * from 'average' value. * @thresh_timeout: a timeout, in samples from the moment an * adaptive threshold event occurs to when the average * value jumps to current value. Note made up of two fields, * 3:0 are for timeout receding - applies if below lower threshold * 7:4 are for timeout approaching - applies if above upper threshold * @state_lock: ensure consistent state of this structure wrt the * hardware. * @interrupts: one or two interrupt numbers depending on device type. * @int_enabled: is a given interrupt currently enabled. * @type: threshold type * @dir: threshold direction */ struct ad7150_chip_info { struct i2c_client *client; u16 threshold[2][2]; u8 thresh_sensitivity[2][2]; u8 thresh_timeout[2][2]; struct mutex state_lock; int interrupts[2]; bool int_enabled[2]; enum iio_event_type type; enum iio_event_direction dir; }; static const u8 ad7150_addresses[][6] = { { AD7150_CH1_DATA_HIGH_REG, AD7150_CH1_AVG_HIGH_REG, AD7150_CH1_SETUP_REG, AD7150_CH1_THR_HOLD_H_REG, AD7150_CH1_SENSITIVITY_REG, AD7150_CH1_TIMEOUT_REG }, { AD7150_CH2_DATA_HIGH_REG, AD7150_CH2_AVG_HIGH_REG, AD7150_CH2_SETUP_REG, AD7150_CH2_THR_HOLD_H_REG, AD7150_CH2_SENSITIVITY_REG, AD7150_CH2_TIMEOUT_REG }, }; static int ad7150_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { struct ad7150_chip_info *chip = iio_priv(indio_dev); int channel = chan->channel; int ret; switch (mask) { case IIO_CHAN_INFO_RAW: ret = i2c_smbus_read_word_swapped(chip->client, ad7150_addresses[channel][0]); if (ret < 0) return ret; *val = ret >> 4; return IIO_VAL_INT; case IIO_CHAN_INFO_AVERAGE_RAW: ret = i2c_smbus_read_word_swapped(chip->client, ad7150_addresses[channel][1]); if (ret < 0) return ret; *val = ret; return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: /* * Base units for capacitance are nano farads and the value * calculated from the datasheet formula is in picofarad * so multiply by 1000 */ *val = 1000; *val2 = 40944 >> 4; /* To match shift in _RAW */ return IIO_VAL_FRACTIONAL; case IIO_CHAN_INFO_OFFSET: *val = -(12288 >> 4); /* To match shift in _RAW */ return IIO_VAL_INT; case IIO_CHAN_INFO_SAMP_FREQ: /* Strangely same for both 1 and 2 chan parts */ *val = 100; return IIO_VAL_INT; default: return -EINVAL; } } static int ad7150_read_event_config(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, enum iio_event_type type, enum iio_event_direction dir) { struct ad7150_chip_info *chip = iio_priv(indio_dev); u8 threshtype; bool thrfixed; int ret; ret = i2c_smbus_read_byte_data(chip->client, AD7150_CFG_REG); if (ret < 0) return ret; threshtype = FIELD_GET(AD7150_CFG_THRESHTYPE_MSK, ret); /*check if threshold mode is fixed or adaptive*/ thrfixed = FIELD_GET(AD7150_CFG_FIX, ret); switch (type) { case IIO_EV_TYPE_THRESH_ADAPTIVE: if (dir == IIO_EV_DIR_RISING) return !thrfixed && (threshtype == AD7150_CFG_TT_POS); return !thrfixed && (threshtype == AD7150_CFG_TT_NEG); case IIO_EV_TYPE_THRESH: if (dir == IIO_EV_DIR_RISING) return thrfixed && (threshtype == AD7150_CFG_TT_POS); return thrfixed && (threshtype == AD7150_CFG_TT_NEG); default: break; } return -EINVAL; } /* state_lock should be held to ensure consistent state */ static int ad7150_write_event_params(struct iio_dev *indio_dev, unsigned int chan, enum iio_event_type type, enum iio_event_direction dir) { struct ad7150_chip_info *chip = iio_priv(indio_dev); int rising = (dir == IIO_EV_DIR_RISING); /* Only update value live, if parameter is in use */ if ((type != chip->type) || (dir != chip->dir)) return 0; switch (type) { /* Note completely different from the adaptive versions */ case IIO_EV_TYPE_THRESH: { u16 value = chip->threshold[rising][chan]; return i2c_smbus_write_word_swapped(chip->client, ad7150_addresses[chan][3], value); } case IIO_EV_TYPE_THRESH_ADAPTIVE: { int ret; u8 sens, timeout; sens = chip->thresh_sensitivity[rising][chan]; ret = i2c_smbus_write_byte_data(chip->client, ad7150_addresses[chan][4], sens); if (ret) return ret; /* * Single timeout register contains timeouts for both * directions. */ timeout = FIELD_PREP(AD7150_CH_TIMEOUT_APPROACHING, chip->thresh_timeout[1][chan]); timeout |= FIELD_PREP(AD7150_CH_TIMEOUT_RECEDING, chip->thresh_timeout[0][chan]); return i2c_smbus_write_byte_data(chip->client, ad7150_addresses[chan][5], timeout); } default: return -EINVAL; } } static int ad7150_write_event_config(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, enum iio_event_type type, enum iio_event_direction dir, int state) { struct ad7150_chip_info *chip = iio_priv(indio_dev); int ret = 0; /* * There is only a single shared control and no on chip * interrupt disables for the two interrupt lines. * So, enabling will switch the events configured to enable * whatever was most recently requested and if necessary enable_irq() * the interrupt and any disable will disable_irq() for that * channels interrupt. */ if (!state) { if ((chip->int_enabled[chan->channel]) && (type == chip->type) && (dir == chip->dir)) { disable_irq(chip->interrupts[chan->channel]); chip->int_enabled[chan->channel] = false; } return 0; } mutex_lock(&chip->state_lock); if ((type != chip->type) || (dir != chip->dir)) { int rising = (dir == IIO_EV_DIR_RISING); u8 thresh_type, cfg, fixed; /* * Need to temporarily disable both interrupts if * enabled - this is to avoid races around changing * config and thresholds. * Note enable/disable_irq() are reference counted so * no need to check if already enabled. */ disable_irq(chip->interrupts[0]); disable_irq(chip->interrupts[1]); ret = i2c_smbus_read_byte_data(chip->client, AD7150_CFG_REG); if (ret < 0) goto error_ret; cfg = ret & ~(AD7150_CFG_THRESHTYPE_MSK | AD7150_CFG_FIX); if (type == IIO_EV_TYPE_THRESH_ADAPTIVE) fixed = 0; else fixed = 1; if (rising) thresh_type = AD7150_CFG_TT_POS; else thresh_type = AD7150_CFG_TT_NEG; cfg |= FIELD_PREP(AD7150_CFG_FIX, fixed) | FIELD_PREP(AD7150_CFG_THRESHTYPE_MSK, thresh_type); ret = i2c_smbus_write_byte_data(chip->client, AD7150_CFG_REG, cfg); if (ret < 0) goto error_ret; /* * There is a potential race condition here, but not easy * to close given we can't disable the interrupt at the * chip side of things. Rely on the status bit. */ chip->type = type; chip->dir = dir; /* update control attributes */ ret = ad7150_write_event_params(indio_dev, chan->channel, type, dir); if (ret) goto error_ret; /* reenable any irq's we disabled whilst changing mode */ enable_irq(chip->interrupts[0]); enable_irq(chip->interrupts[1]); } if (!chip->int_enabled[chan->channel]) { enable_irq(chip->interrupts[chan->channel]); chip->int_enabled[chan->channel] = true; } error_ret: mutex_unlock(&chip->state_lock); return ret; } static int ad7150_read_event_value(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, enum iio_event_type type, enum iio_event_direction dir, enum iio_event_info info, int *val, int *val2) { struct ad7150_chip_info *chip = iio_priv(indio_dev); int rising = (dir == IIO_EV_DIR_RISING); /* Complex register sharing going on here */ switch (info) { case IIO_EV_INFO_VALUE: switch (type) { case IIO_EV_TYPE_THRESH_ADAPTIVE: *val = chip->thresh_sensitivity[rising][chan->channel]; return IIO_VAL_INT; case IIO_EV_TYPE_THRESH: *val = chip->threshold[rising][chan->channel]; return IIO_VAL_INT; default: return -EINVAL; } case IIO_EV_INFO_TIMEOUT: *val = 0; *val2 = chip->thresh_timeout[rising][chan->channel] * 10000; return IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; } } static int ad7150_write_event_value(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, enum iio_event_type type, enum iio_event_direction dir, enum iio_event_info info, int val, int val2) { int ret; struct ad7150_chip_info *chip = iio_priv(indio_dev); int rising = (dir == IIO_EV_DIR_RISING); mutex_lock(&chip->state_lock); switch (info) { case IIO_EV_INFO_VALUE: switch (type) { case IIO_EV_TYPE_THRESH_ADAPTIVE: chip->thresh_sensitivity[rising][chan->channel] = val; break; case IIO_EV_TYPE_THRESH: chip->threshold[rising][chan->channel] = val; break; default: ret = -EINVAL; goto error_ret; } break; case IIO_EV_INFO_TIMEOUT: { /* * Raw timeout is in cycles of 10 msecs as long as both * channels are enabled. * In terms of INT_PLUS_MICRO, that is in units of 10,000 */ int timeout = val2 / 10000; if (val != 0 || timeout < 0 || timeout > 15 || val2 % 10000) { ret = -EINVAL; goto error_ret; } chip->thresh_timeout[rising][chan->channel] = timeout; break; } default: ret = -EINVAL; goto error_ret; } /* write back if active */ ret = ad7150_write_event_params(indio_dev, chan->channel, type, dir); error_ret: mutex_unlock(&chip->state_lock); return ret; } static const struct iio_event_spec ad7150_events[] = { { .type = IIO_EV_TYPE_THRESH, .dir = IIO_EV_DIR_RISING, .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE), }, { .type = IIO_EV_TYPE_THRESH, .dir = IIO_EV_DIR_FALLING, .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE), }, { .type = IIO_EV_TYPE_THRESH_ADAPTIVE, .dir = IIO_EV_DIR_RISING, .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE) | BIT(IIO_EV_INFO_TIMEOUT), }, { .type = IIO_EV_TYPE_THRESH_ADAPTIVE, .dir = IIO_EV_DIR_FALLING, .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE) | BIT(IIO_EV_INFO_TIMEOUT), }, }; #define AD7150_CAPACITANCE_CHAN(_chan) { \ .type = IIO_CAPACITANCE, \ .indexed = 1, \ .channel = _chan, \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ BIT(IIO_CHAN_INFO_AVERAGE_RAW), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ BIT(IIO_CHAN_INFO_OFFSET), \ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\ .event_spec = ad7150_events, \ .num_event_specs = ARRAY_SIZE(ad7150_events), \ } #define AD7150_CAPACITANCE_CHAN_NO_IRQ(_chan) { \ .type = IIO_CAPACITANCE, \ .indexed = 1, \ .channel = _chan, \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ BIT(IIO_CHAN_INFO_AVERAGE_RAW), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ BIT(IIO_CHAN_INFO_OFFSET), \ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\ } static const struct iio_chan_spec ad7150_channels[] = { AD7150_CAPACITANCE_CHAN(0), AD7150_CAPACITANCE_CHAN(1), }; static const struct iio_chan_spec ad7150_channels_no_irq[] = { AD7150_CAPACITANCE_CHAN_NO_IRQ(0), AD7150_CAPACITANCE_CHAN_NO_IRQ(1), }; static const struct iio_chan_spec ad7151_channels[] = { AD7150_CAPACITANCE_CHAN(0), }; static const struct iio_chan_spec ad7151_channels_no_irq[] = { AD7150_CAPACITANCE_CHAN_NO_IRQ(0), }; static irqreturn_t __ad7150_event_handler(void *private, u8 status_mask, int channel) { struct iio_dev *indio_dev = private; struct ad7150_chip_info *chip = iio_priv(indio_dev); s64 timestamp = iio_get_time_ns(indio_dev); int int_status; int_status = i2c_smbus_read_byte_data(chip->client, AD7150_STATUS_REG); if (int_status < 0) return IRQ_HANDLED; if (!(int_status & status_mask)) return IRQ_HANDLED; iio_push_event(indio_dev, IIO_UNMOD_EVENT_CODE(IIO_CAPACITANCE, channel, chip->type, chip->dir), timestamp); return IRQ_HANDLED; } static irqreturn_t ad7150_event_handler_ch1(int irq, void *private) { return __ad7150_event_handler(private, AD7150_STATUS_OUT1, 0); } static irqreturn_t ad7150_event_handler_ch2(int irq, void *private) { return __ad7150_event_handler(private, AD7150_STATUS_OUT2, 1); } static IIO_CONST_ATTR(in_capacitance_thresh_adaptive_timeout_available, "[0 0.01 0.15]"); static struct attribute *ad7150_event_attributes[] = { &iio_const_attr_in_capacitance_thresh_adaptive_timeout_available .dev_attr.attr, NULL, }; static const struct attribute_group ad7150_event_attribute_group = { .attrs = ad7150_event_attributes, .name = "events", }; static const struct iio_info ad7150_info = { .event_attrs = &ad7150_event_attribute_group, .read_raw = &ad7150_read_raw, .read_event_config = &ad7150_read_event_config, .write_event_config = &ad7150_write_event_config, .read_event_value = &ad7150_read_event_value, .write_event_value = &ad7150_write_event_value, }; static const struct iio_info ad7150_info_no_irq = { .read_raw = &ad7150_read_raw, }; static int ad7150_probe(struct i2c_client *client) { const struct i2c_device_id *id = i2c_client_get_device_id(client); struct ad7150_chip_info *chip; struct iio_dev *indio_dev; int ret; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip)); if (!indio_dev) return -ENOMEM; chip = iio_priv(indio_dev); mutex_init(&chip->state_lock); chip->client = client; indio_dev->name = id->name; indio_dev->modes = INDIO_DIRECT_MODE; ret = devm_regulator_get_enable(&client->dev, "vdd"); if (ret) return ret; chip->interrupts[0] = fwnode_irq_get(dev_fwnode(&client->dev), 0); if (chip->interrupts[0] < 0) return chip->interrupts[0]; if (id->driver_data == AD7150) { chip->interrupts[1] = fwnode_irq_get(dev_fwnode(&client->dev), 1); if (chip->interrupts[1] < 0) return chip->interrupts[1]; } if (chip->interrupts[0] && (id->driver_data == AD7151 || chip->interrupts[1])) { irq_set_status_flags(chip->interrupts[0], IRQ_NOAUTOEN); ret = devm_request_threaded_irq(&client->dev, chip->interrupts[0], NULL, &ad7150_event_handler_ch1, IRQF_TRIGGER_RISING | IRQF_ONESHOT, "ad7150_irq1", indio_dev); if (ret) return ret; indio_dev->info = &ad7150_info; switch (id->driver_data) { case AD7150: indio_dev->channels = ad7150_channels; indio_dev->num_channels = ARRAY_SIZE(ad7150_channels); irq_set_status_flags(chip->interrupts[1], IRQ_NOAUTOEN); ret = devm_request_threaded_irq(&client->dev, chip->interrupts[1], NULL, &ad7150_event_handler_ch2, IRQF_TRIGGER_RISING | IRQF_ONESHOT, "ad7150_irq2", indio_dev); if (ret) return ret; break; case AD7151: indio_dev->channels = ad7151_channels; indio_dev->num_channels = ARRAY_SIZE(ad7151_channels); break; default: return -EINVAL; } } else { indio_dev->info = &ad7150_info_no_irq; switch (id->driver_data) { case AD7150: indio_dev->channels = ad7150_channels_no_irq; indio_dev->num_channels = ARRAY_SIZE(ad7150_channels_no_irq); break; case AD7151: indio_dev->channels = ad7151_channels_no_irq; indio_dev->num_channels = ARRAY_SIZE(ad7151_channels_no_irq); break; default: return -EINVAL; } } return devm_iio_device_register(indio_dev->dev.parent, indio_dev); } static const struct i2c_device_id ad7150_id[] = { { "ad7150", AD7150 }, { "ad7151", AD7151 }, { "ad7156", AD7150 }, {} }; MODULE_DEVICE_TABLE(i2c, ad7150_id); static const struct of_device_id ad7150_of_match[] = { { "adi,ad7150" }, { "adi,ad7151" }, { "adi,ad7156" }, {} }; static struct i2c_driver ad7150_driver = { .driver = { .name = "ad7150", .of_match_table = ad7150_of_match, }, .probe_new = ad7150_probe, .id_table = ad7150_id, }; module_i2c_driver(ad7150_driver); MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); MODULE_DESCRIPTION("Analog Devices AD7150/1/6 capacitive sensor driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1