Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Maxime Ripard | 2125 | 98.98% | 1 | 11.11% |
Chen-Yu Tsai | 13 | 0.61% | 2 | 22.22% |
Tomi Valkeinen | 3 | 0.14% | 2 | 22.22% |
Hans Verkuil | 3 | 0.14% | 2 | 22.22% |
Oleg Verych | 2 | 0.09% | 1 | 11.11% |
Laurent Pinchart | 1 | 0.05% | 1 | 11.11% |
Total | 2147 | 9 |
// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2016 NextThing Co * Copyright (C) 2016-2019 Bootlin * * Author: Maxime Ripard <maxime.ripard@bootlin.com> */ #include <linux/device.h> #include <linux/interrupt.h> #include <linux/list.h> #include <linux/mutex.h> #include <linux/spinlock.h> #include <media/videobuf2-dma-contig.h> #include <media/videobuf2-v4l2.h> #include "sun4i_csi.h" struct sun4i_csi_buffer { struct vb2_v4l2_buffer vb; struct list_head list; }; static inline struct sun4i_csi_buffer * vb2_v4l2_to_csi_buffer(const struct vb2_v4l2_buffer *p) { return container_of(p, struct sun4i_csi_buffer, vb); } static inline struct sun4i_csi_buffer * vb2_to_csi_buffer(const struct vb2_buffer *p) { return vb2_v4l2_to_csi_buffer(to_vb2_v4l2_buffer(p)); } static void sun4i_csi_capture_start(struct sun4i_csi *csi) { writel(CSI_CPT_CTRL_VIDEO_START, csi->regs + CSI_CPT_CTRL_REG); } static void sun4i_csi_capture_stop(struct sun4i_csi *csi) { writel(0, csi->regs + CSI_CPT_CTRL_REG); } static int sun4i_csi_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers, unsigned int *nplanes, unsigned int sizes[], struct device *alloc_devs[]) { struct sun4i_csi *csi = vb2_get_drv_priv(vq); unsigned int num_planes = csi->fmt.num_planes; unsigned int i; if (*nplanes) { if (*nplanes != num_planes) return -EINVAL; for (i = 0; i < num_planes; i++) if (sizes[i] < csi->fmt.plane_fmt[i].sizeimage) return -EINVAL; return 0; } *nplanes = num_planes; for (i = 0; i < num_planes; i++) sizes[i] = csi->fmt.plane_fmt[i].sizeimage; return 0; }; static int sun4i_csi_buffer_prepare(struct vb2_buffer *vb) { struct sun4i_csi *csi = vb2_get_drv_priv(vb->vb2_queue); unsigned int i; for (i = 0; i < csi->fmt.num_planes; i++) { unsigned long size = csi->fmt.plane_fmt[i].sizeimage; if (vb2_plane_size(vb, i) < size) { dev_err(csi->dev, "buffer too small (%lu < %lu)\n", vb2_plane_size(vb, i), size); return -EINVAL; } vb2_set_plane_payload(vb, i, size); } return 0; } static int sun4i_csi_setup_scratch_buffer(struct sun4i_csi *csi, unsigned int slot) { dma_addr_t addr = csi->scratch.paddr; unsigned int plane; dev_dbg(csi->dev, "No more available buffer, using the scratch buffer\n"); for (plane = 0; plane < csi->fmt.num_planes; plane++) { writel(addr, csi->regs + CSI_BUF_ADDR_REG(plane, slot)); addr += csi->fmt.plane_fmt[plane].sizeimage; } csi->current_buf[slot] = NULL; return 0; } static int sun4i_csi_buffer_fill_slot(struct sun4i_csi *csi, unsigned int slot) { struct sun4i_csi_buffer *c_buf; struct vb2_v4l2_buffer *v_buf; unsigned int plane; /* * We should never end up in a situation where we overwrite an * already filled slot. */ if (WARN_ON(csi->current_buf[slot])) return -EINVAL; if (list_empty(&csi->buf_list)) return sun4i_csi_setup_scratch_buffer(csi, slot); c_buf = list_first_entry(&csi->buf_list, struct sun4i_csi_buffer, list); list_del_init(&c_buf->list); v_buf = &c_buf->vb; csi->current_buf[slot] = v_buf; for (plane = 0; plane < csi->fmt.num_planes; plane++) { dma_addr_t buf_addr; buf_addr = vb2_dma_contig_plane_dma_addr(&v_buf->vb2_buf, plane); writel(buf_addr, csi->regs + CSI_BUF_ADDR_REG(plane, slot)); } return 0; } static int sun4i_csi_buffer_fill_all(struct sun4i_csi *csi) { unsigned int slot; int ret; for (slot = 0; slot < CSI_MAX_BUFFER; slot++) { ret = sun4i_csi_buffer_fill_slot(csi, slot); if (ret) return ret; } return 0; } static void sun4i_csi_buffer_mark_done(struct sun4i_csi *csi, unsigned int slot, unsigned int sequence) { struct vb2_v4l2_buffer *v_buf; if (!csi->current_buf[slot]) { dev_dbg(csi->dev, "Scratch buffer was used, ignoring..\n"); return; } v_buf = csi->current_buf[slot]; v_buf->field = csi->fmt.field; v_buf->sequence = sequence; v_buf->vb2_buf.timestamp = ktime_get_ns(); vb2_buffer_done(&v_buf->vb2_buf, VB2_BUF_STATE_DONE); csi->current_buf[slot] = NULL; } static int sun4i_csi_buffer_flip(struct sun4i_csi *csi, unsigned int sequence) { u32 reg = readl(csi->regs + CSI_BUF_CTRL_REG); unsigned int next; /* Our next buffer is not the current buffer */ next = !(reg & CSI_BUF_CTRL_DBS); /* Report the previous buffer as done */ sun4i_csi_buffer_mark_done(csi, next, sequence); /* Put a new buffer in there */ return sun4i_csi_buffer_fill_slot(csi, next); } static void sun4i_csi_buffer_queue(struct vb2_buffer *vb) { struct sun4i_csi *csi = vb2_get_drv_priv(vb->vb2_queue); struct sun4i_csi_buffer *buf = vb2_to_csi_buffer(vb); unsigned long flags; spin_lock_irqsave(&csi->qlock, flags); list_add_tail(&buf->list, &csi->buf_list); spin_unlock_irqrestore(&csi->qlock, flags); } static void return_all_buffers(struct sun4i_csi *csi, enum vb2_buffer_state state) { struct sun4i_csi_buffer *buf, *node; unsigned int slot; list_for_each_entry_safe(buf, node, &csi->buf_list, list) { vb2_buffer_done(&buf->vb.vb2_buf, state); list_del(&buf->list); } for (slot = 0; slot < CSI_MAX_BUFFER; slot++) { struct vb2_v4l2_buffer *v_buf = csi->current_buf[slot]; if (!v_buf) continue; vb2_buffer_done(&v_buf->vb2_buf, state); csi->current_buf[slot] = NULL; } } static int sun4i_csi_start_streaming(struct vb2_queue *vq, unsigned int count) { struct sun4i_csi *csi = vb2_get_drv_priv(vq); struct v4l2_mbus_config_parallel *bus = &csi->bus; const struct sun4i_csi_format *csi_fmt; unsigned long href_pol, pclk_pol, vref_pol; unsigned long flags; unsigned int i; int ret; csi_fmt = sun4i_csi_find_format(&csi->fmt.pixelformat, NULL); if (!csi_fmt) return -EINVAL; dev_dbg(csi->dev, "Starting capture\n"); csi->sequence = 0; /* * We need a scratch buffer in case where we'll not have any * more buffer queued so that we don't error out. One of those * cases is when you end up at the last frame to capture, you * don't have any buffer queued any more, and yet it doesn't * really matter since you'll never reach the next buffer. * * Since we support the multi-planar API, we need to have a * buffer for each plane. Allocating a single one large enough * to hold all the buffers is simpler, so let's go for that. */ csi->scratch.size = 0; for (i = 0; i < csi->fmt.num_planes; i++) csi->scratch.size += csi->fmt.plane_fmt[i].sizeimage; csi->scratch.vaddr = dma_alloc_coherent(csi->dev, csi->scratch.size, &csi->scratch.paddr, GFP_KERNEL); if (!csi->scratch.vaddr) { dev_err(csi->dev, "Failed to allocate scratch buffer\n"); ret = -ENOMEM; goto err_clear_dma_queue; } ret = video_device_pipeline_alloc_start(&csi->vdev); if (ret < 0) goto err_free_scratch_buffer; spin_lock_irqsave(&csi->qlock, flags); /* Setup timings */ writel(CSI_WIN_CTRL_W_ACTIVE(csi->fmt.width * 2), csi->regs + CSI_WIN_CTRL_W_REG); writel(CSI_WIN_CTRL_H_ACTIVE(csi->fmt.height), csi->regs + CSI_WIN_CTRL_H_REG); /* * This hardware uses [HV]REF instead of [HV]SYNC. Based on the * provided timing diagrams in the manual, positive polarity * equals active high [HV]REF. * * When the back porch is 0, [HV]REF is more or less equivalent * to [HV]SYNC inverted. */ href_pol = !!(bus->flags & V4L2_MBUS_HSYNC_ACTIVE_LOW); vref_pol = !!(bus->flags & V4L2_MBUS_VSYNC_ACTIVE_LOW); pclk_pol = !!(bus->flags & V4L2_MBUS_PCLK_SAMPLE_RISING); writel(CSI_CFG_INPUT_FMT(csi_fmt->input) | CSI_CFG_OUTPUT_FMT(csi_fmt->output) | CSI_CFG_VREF_POL(vref_pol) | CSI_CFG_HREF_POL(href_pol) | CSI_CFG_PCLK_POL(pclk_pol), csi->regs + CSI_CFG_REG); /* Setup buffer length */ writel(csi->fmt.plane_fmt[0].bytesperline, csi->regs + CSI_BUF_LEN_REG); /* Prepare our buffers in hardware */ ret = sun4i_csi_buffer_fill_all(csi); if (ret) { spin_unlock_irqrestore(&csi->qlock, flags); goto err_disable_pipeline; } /* Enable double buffering */ writel(CSI_BUF_CTRL_DBE, csi->regs + CSI_BUF_CTRL_REG); /* Clear the pending interrupts */ writel(CSI_INT_FRM_DONE, csi->regs + CSI_INT_STA_REG); /* Enable frame done interrupt */ writel(CSI_INT_FRM_DONE, csi->regs + CSI_INT_EN_REG); sun4i_csi_capture_start(csi); spin_unlock_irqrestore(&csi->qlock, flags); ret = v4l2_subdev_call(csi->src_subdev, video, s_stream, 1); if (ret < 0 && ret != -ENOIOCTLCMD) goto err_disable_device; return 0; err_disable_device: sun4i_csi_capture_stop(csi); err_disable_pipeline: video_device_pipeline_stop(&csi->vdev); err_free_scratch_buffer: dma_free_coherent(csi->dev, csi->scratch.size, csi->scratch.vaddr, csi->scratch.paddr); err_clear_dma_queue: spin_lock_irqsave(&csi->qlock, flags); return_all_buffers(csi, VB2_BUF_STATE_QUEUED); spin_unlock_irqrestore(&csi->qlock, flags); return ret; } static void sun4i_csi_stop_streaming(struct vb2_queue *vq) { struct sun4i_csi *csi = vb2_get_drv_priv(vq); unsigned long flags; dev_dbg(csi->dev, "Stopping capture\n"); v4l2_subdev_call(csi->src_subdev, video, s_stream, 0); sun4i_csi_capture_stop(csi); /* Release all active buffers */ spin_lock_irqsave(&csi->qlock, flags); return_all_buffers(csi, VB2_BUF_STATE_ERROR); spin_unlock_irqrestore(&csi->qlock, flags); video_device_pipeline_stop(&csi->vdev); dma_free_coherent(csi->dev, csi->scratch.size, csi->scratch.vaddr, csi->scratch.paddr); } static const struct vb2_ops sun4i_csi_qops = { .queue_setup = sun4i_csi_queue_setup, .buf_prepare = sun4i_csi_buffer_prepare, .buf_queue = sun4i_csi_buffer_queue, .start_streaming = sun4i_csi_start_streaming, .stop_streaming = sun4i_csi_stop_streaming, .wait_prepare = vb2_ops_wait_prepare, .wait_finish = vb2_ops_wait_finish, }; static irqreturn_t sun4i_csi_irq(int irq, void *data) { struct sun4i_csi *csi = data; u32 reg; reg = readl(csi->regs + CSI_INT_STA_REG); /* Acknowledge the interrupts */ writel(reg, csi->regs + CSI_INT_STA_REG); if (!(reg & CSI_INT_FRM_DONE)) return IRQ_HANDLED; spin_lock(&csi->qlock); if (sun4i_csi_buffer_flip(csi, csi->sequence++)) { dev_warn(csi->dev, "%s: Flip failed\n", __func__); sun4i_csi_capture_stop(csi); } spin_unlock(&csi->qlock); return IRQ_HANDLED; } int sun4i_csi_dma_register(struct sun4i_csi *csi, int irq) { struct vb2_queue *q = &csi->queue; int ret; int i; spin_lock_init(&csi->qlock); mutex_init(&csi->lock); INIT_LIST_HEAD(&csi->buf_list); for (i = 0; i < CSI_MAX_BUFFER; i++) csi->current_buf[i] = NULL; q->min_buffers_needed = 3; q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; q->io_modes = VB2_MMAP | VB2_DMABUF; q->lock = &csi->lock; q->drv_priv = csi; q->buf_struct_size = sizeof(struct sun4i_csi_buffer); q->ops = &sun4i_csi_qops; q->mem_ops = &vb2_dma_contig_memops; q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; q->dev = csi->dev; ret = vb2_queue_init(q); if (ret < 0) { dev_err(csi->dev, "failed to initialize VB2 queue\n"); goto err_free_mutex; } ret = v4l2_device_register(csi->dev, &csi->v4l); if (ret) { dev_err(csi->dev, "Couldn't register the v4l2 device\n"); goto err_free_mutex; } ret = devm_request_irq(csi->dev, irq, sun4i_csi_irq, 0, dev_name(csi->dev), csi); if (ret) { dev_err(csi->dev, "Couldn't register our interrupt\n"); goto err_unregister_device; } return 0; err_unregister_device: v4l2_device_unregister(&csi->v4l); err_free_mutex: mutex_destroy(&csi->lock); return ret; } void sun4i_csi_dma_unregister(struct sun4i_csi *csi) { v4l2_device_unregister(&csi->v4l); mutex_destroy(&csi->lock); }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1