Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Sunil Goutham | 922 | 99.25% | 3 | 42.86% |
David Daney | 3 | 0.32% | 1 | 14.29% |
Thomas Gleixner | 2 | 0.22% | 1 | 14.29% |
Vadim Lomovtsev | 1 | 0.11% | 1 | 14.29% |
Vincent Stehlé | 1 | 0.11% | 1 | 14.29% |
Total | 929 | 7 |
// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2016 Cavium, Inc. */ #include <linux/acpi.h> #include <linux/module.h> #include <linux/interrupt.h> #include <linux/pci.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/phy.h> #include <linux/of.h> #include <linux/of_mdio.h> #include <linux/of_net.h> #include "nic.h" #include "thunder_bgx.h" #define DRV_NAME "thunder_xcv" #define DRV_VERSION "1.0" /* Register offsets */ #define XCV_RESET 0x00 #define PORT_EN BIT_ULL(63) #define CLK_RESET BIT_ULL(15) #define DLL_RESET BIT_ULL(11) #define COMP_EN BIT_ULL(7) #define TX_PKT_RESET BIT_ULL(3) #define TX_DATA_RESET BIT_ULL(2) #define RX_PKT_RESET BIT_ULL(1) #define RX_DATA_RESET BIT_ULL(0) #define XCV_DLL_CTL 0x10 #define CLKRX_BYP BIT_ULL(23) #define CLKTX_BYP BIT_ULL(15) #define XCV_COMP_CTL 0x20 #define DRV_BYP BIT_ULL(63) #define XCV_CTL 0x30 #define XCV_INT 0x40 #define XCV_INT_W1S 0x48 #define XCV_INT_ENA_W1C 0x50 #define XCV_INT_ENA_W1S 0x58 #define XCV_INBND_STATUS 0x80 #define XCV_BATCH_CRD_RET 0x100 struct xcv { void __iomem *reg_base; struct pci_dev *pdev; }; static struct xcv *xcv; /* Supported devices */ static const struct pci_device_id xcv_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, 0xA056) }, { 0, } /* end of table */ }; MODULE_AUTHOR("Cavium Inc"); MODULE_DESCRIPTION("Cavium Thunder RGX/XCV Driver"); MODULE_LICENSE("GPL v2"); MODULE_VERSION(DRV_VERSION); MODULE_DEVICE_TABLE(pci, xcv_id_table); void xcv_init_hw(void) { u64 cfg; /* Take DLL out of reset */ cfg = readq_relaxed(xcv->reg_base + XCV_RESET); cfg &= ~DLL_RESET; writeq_relaxed(cfg, xcv->reg_base + XCV_RESET); /* Take clock tree out of reset */ cfg = readq_relaxed(xcv->reg_base + XCV_RESET); cfg &= ~CLK_RESET; writeq_relaxed(cfg, xcv->reg_base + XCV_RESET); /* Wait for DLL to lock */ msleep(1); /* Configure DLL - enable or bypass * TX no bypass, RX bypass */ cfg = readq_relaxed(xcv->reg_base + XCV_DLL_CTL); cfg &= ~0xFF03; cfg |= CLKRX_BYP; writeq_relaxed(cfg, xcv->reg_base + XCV_DLL_CTL); /* Enable compensation controller and force the * write to be visible to HW by readig back. */ cfg = readq_relaxed(xcv->reg_base + XCV_RESET); cfg |= COMP_EN; writeq_relaxed(cfg, xcv->reg_base + XCV_RESET); readq_relaxed(xcv->reg_base + XCV_RESET); /* Wait for compensation state machine to lock */ msleep(10); /* enable the XCV block */ cfg = readq_relaxed(xcv->reg_base + XCV_RESET); cfg |= PORT_EN; writeq_relaxed(cfg, xcv->reg_base + XCV_RESET); cfg = readq_relaxed(xcv->reg_base + XCV_RESET); cfg |= CLK_RESET; writeq_relaxed(cfg, xcv->reg_base + XCV_RESET); } EXPORT_SYMBOL(xcv_init_hw); void xcv_setup_link(bool link_up, int link_speed) { u64 cfg; int speed = 2; if (!xcv) { pr_err("XCV init not done, probe may have failed\n"); return; } if (link_speed == 100) speed = 1; else if (link_speed == 10) speed = 0; if (link_up) { /* set operating speed */ cfg = readq_relaxed(xcv->reg_base + XCV_CTL); cfg &= ~0x03; cfg |= speed; writeq_relaxed(cfg, xcv->reg_base + XCV_CTL); /* Reset datapaths */ cfg = readq_relaxed(xcv->reg_base + XCV_RESET); cfg |= TX_DATA_RESET | RX_DATA_RESET; writeq_relaxed(cfg, xcv->reg_base + XCV_RESET); /* Enable the packet flow */ cfg = readq_relaxed(xcv->reg_base + XCV_RESET); cfg |= TX_PKT_RESET | RX_PKT_RESET; writeq_relaxed(cfg, xcv->reg_base + XCV_RESET); /* Return credits to RGX */ writeq_relaxed(0x01, xcv->reg_base + XCV_BATCH_CRD_RET); } else { /* Disable packet flow */ cfg = readq_relaxed(xcv->reg_base + XCV_RESET); cfg &= ~(TX_PKT_RESET | RX_PKT_RESET); writeq_relaxed(cfg, xcv->reg_base + XCV_RESET); readq_relaxed(xcv->reg_base + XCV_RESET); } } EXPORT_SYMBOL(xcv_setup_link); static int xcv_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { int err; struct device *dev = &pdev->dev; xcv = devm_kzalloc(dev, sizeof(struct xcv), GFP_KERNEL); if (!xcv) return -ENOMEM; xcv->pdev = pdev; pci_set_drvdata(pdev, xcv); err = pci_enable_device(pdev); if (err) { dev_err(dev, "Failed to enable PCI device\n"); goto err_kfree; } err = pci_request_regions(pdev, DRV_NAME); if (err) { dev_err(dev, "PCI request regions failed 0x%x\n", err); goto err_disable_device; } /* MAP configuration registers */ xcv->reg_base = pcim_iomap(pdev, PCI_CFG_REG_BAR_NUM, 0); if (!xcv->reg_base) { dev_err(dev, "XCV: Cannot map CSR memory space, aborting\n"); err = -ENOMEM; goto err_release_regions; } return 0; err_release_regions: pci_release_regions(pdev); err_disable_device: pci_disable_device(pdev); err_kfree: devm_kfree(dev, xcv); xcv = NULL; return err; } static void xcv_remove(struct pci_dev *pdev) { struct device *dev = &pdev->dev; if (xcv) { devm_kfree(dev, xcv); xcv = NULL; } pci_release_regions(pdev); pci_disable_device(pdev); } static struct pci_driver xcv_driver = { .name = DRV_NAME, .id_table = xcv_id_table, .probe = xcv_probe, .remove = xcv_remove, }; static int __init xcv_init_module(void) { pr_info("%s, ver %s\n", DRV_NAME, DRV_VERSION); return pci_register_driver(&xcv_driver); } static void __exit xcv_cleanup_module(void) { pci_unregister_driver(&xcv_driver); } module_init(xcv_init_module); module_exit(xcv_cleanup_module);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1