Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Thomas Petazzoni | 663 | 34.23% | 2 | 5.56% |
Antoine Tenart | 396 | 20.44% | 6 | 16.67% |
Florian Fainelli | 299 | 15.44% | 3 | 8.33% |
Russell King | 153 | 7.90% | 3 | 8.33% |
Leigh Brown | 109 | 5.63% | 4 | 11.11% |
Sebastian Hesselbarth | 88 | 4.54% | 1 | 2.78% |
Marcin Wojtas | 69 | 3.56% | 4 | 11.11% |
Arnaud Patard | 51 | 2.63% | 1 | 2.78% |
Ezequiel García | 34 | 1.76% | 2 | 5.56% |
Josua Mayer | 31 | 1.60% | 3 | 8.33% |
Tobias Jordan | 14 | 0.72% | 1 | 2.78% |
Andrew Lunn | 12 | 0.62% | 1 | 2.78% |
Chris Packham | 6 | 0.31% | 2 | 5.56% |
Simon Baatz | 5 | 0.26% | 1 | 2.78% |
Alexey Khoroshilov | 4 | 0.21% | 1 | 2.78% |
Calvin Johnson | 3 | 0.15% | 1 | 2.78% |
Total | 1937 | 36 |
/* * Driver for the MDIO interface of Marvell network interfaces. * * Since the MDIO interface of Marvell network interfaces is shared * between all network interfaces, having a single driver allows to * handle concurrent accesses properly (you may have four Ethernet * ports, but they in fact share the same SMI interface to access * the MDIO bus). This driver is currently used by the mvneta and * mv643xx_eth drivers. * * Copyright (C) 2012 Marvell * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ #include <linux/acpi.h> #include <linux/acpi_mdio.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/of_mdio.h> #include <linux/phy.h> #include <linux/platform_device.h> #include <linux/sched.h> #include <linux/wait.h> #define MVMDIO_SMI_DATA_SHIFT 0 #define MVMDIO_SMI_PHY_ADDR_SHIFT 16 #define MVMDIO_SMI_PHY_REG_SHIFT 21 #define MVMDIO_SMI_READ_OPERATION BIT(26) #define MVMDIO_SMI_WRITE_OPERATION 0 #define MVMDIO_SMI_READ_VALID BIT(27) #define MVMDIO_SMI_BUSY BIT(28) #define MVMDIO_ERR_INT_CAUSE 0x007C #define MVMDIO_ERR_INT_SMI_DONE 0x00000010 #define MVMDIO_ERR_INT_MASK 0x0080 #define MVMDIO_XSMI_MGNT_REG 0x0 #define MVMDIO_XSMI_PHYADDR_SHIFT 16 #define MVMDIO_XSMI_DEVADDR_SHIFT 21 #define MVMDIO_XSMI_WRITE_OPERATION (0x5 << 26) #define MVMDIO_XSMI_READ_OPERATION (0x7 << 26) #define MVMDIO_XSMI_READ_VALID BIT(29) #define MVMDIO_XSMI_BUSY BIT(30) #define MVMDIO_XSMI_ADDR_REG 0x8 /* * SMI Timeout measurements: * - Kirkwood 88F6281 (Globalscale Dreamplug): 45us to 95us (Interrupt) * - Armada 370 (Globalscale Mirabox): 41us to 43us (Polled) */ #define MVMDIO_SMI_TIMEOUT 1000 /* 1000us = 1ms */ #define MVMDIO_SMI_POLL_INTERVAL_MIN 45 #define MVMDIO_SMI_POLL_INTERVAL_MAX 55 #define MVMDIO_XSMI_POLL_INTERVAL_MIN 150 #define MVMDIO_XSMI_POLL_INTERVAL_MAX 160 struct orion_mdio_dev { void __iomem *regs; struct clk *clk[4]; /* * If we have access to the error interrupt pin (which is * somewhat misnamed as it not only reflects internal errors * but also reflects SMI completion), use that to wait for * SMI access completion instead of polling the SMI busy bit. */ int err_interrupt; wait_queue_head_t smi_busy_wait; }; enum orion_mdio_bus_type { BUS_TYPE_SMI, BUS_TYPE_XSMI }; struct orion_mdio_ops { int (*is_done)(struct orion_mdio_dev *); unsigned int poll_interval_min; unsigned int poll_interval_max; }; /* Wait for the SMI unit to be ready for another operation */ static int orion_mdio_wait_ready(const struct orion_mdio_ops *ops, struct mii_bus *bus) { struct orion_mdio_dev *dev = bus->priv; unsigned long timeout = usecs_to_jiffies(MVMDIO_SMI_TIMEOUT); unsigned long end = jiffies + timeout; int timedout = 0; while (1) { if (ops->is_done(dev)) return 0; else if (timedout) break; if (dev->err_interrupt <= 0) { usleep_range(ops->poll_interval_min, ops->poll_interval_max); if (time_is_before_jiffies(end)) ++timedout; } else { /* wait_event_timeout does not guarantee a delay of at * least one whole jiffie, so timeout must be no less * than two. */ if (timeout < 2) timeout = 2; wait_event_timeout(dev->smi_busy_wait, ops->is_done(dev), timeout); ++timedout; } } dev_err(bus->parent, "Timeout: SMI busy for too long\n"); return -ETIMEDOUT; } static int orion_mdio_smi_is_done(struct orion_mdio_dev *dev) { return !(readl(dev->regs) & MVMDIO_SMI_BUSY); } static const struct orion_mdio_ops orion_mdio_smi_ops = { .is_done = orion_mdio_smi_is_done, .poll_interval_min = MVMDIO_SMI_POLL_INTERVAL_MIN, .poll_interval_max = MVMDIO_SMI_POLL_INTERVAL_MAX, }; static int orion_mdio_smi_read(struct mii_bus *bus, int mii_id, int regnum) { struct orion_mdio_dev *dev = bus->priv; u32 val; int ret; ret = orion_mdio_wait_ready(&orion_mdio_smi_ops, bus); if (ret < 0) return ret; writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) | (regnum << MVMDIO_SMI_PHY_REG_SHIFT) | MVMDIO_SMI_READ_OPERATION), dev->regs); ret = orion_mdio_wait_ready(&orion_mdio_smi_ops, bus); if (ret < 0) return ret; val = readl(dev->regs); if (!(val & MVMDIO_SMI_READ_VALID)) { dev_err(bus->parent, "SMI bus read not valid\n"); return -ENODEV; } return val & GENMASK(15, 0); } static int orion_mdio_smi_write(struct mii_bus *bus, int mii_id, int regnum, u16 value) { struct orion_mdio_dev *dev = bus->priv; int ret; ret = orion_mdio_wait_ready(&orion_mdio_smi_ops, bus); if (ret < 0) return ret; writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) | (regnum << MVMDIO_SMI_PHY_REG_SHIFT) | MVMDIO_SMI_WRITE_OPERATION | (value << MVMDIO_SMI_DATA_SHIFT)), dev->regs); return 0; } static int orion_mdio_xsmi_is_done(struct orion_mdio_dev *dev) { return !(readl(dev->regs + MVMDIO_XSMI_MGNT_REG) & MVMDIO_XSMI_BUSY); } static const struct orion_mdio_ops orion_mdio_xsmi_ops = { .is_done = orion_mdio_xsmi_is_done, .poll_interval_min = MVMDIO_XSMI_POLL_INTERVAL_MIN, .poll_interval_max = MVMDIO_XSMI_POLL_INTERVAL_MAX, }; static int orion_mdio_xsmi_read_c45(struct mii_bus *bus, int mii_id, int dev_addr, int regnum) { struct orion_mdio_dev *dev = bus->priv; int ret; ret = orion_mdio_wait_ready(&orion_mdio_xsmi_ops, bus); if (ret < 0) return ret; writel(regnum, dev->regs + MVMDIO_XSMI_ADDR_REG); writel((mii_id << MVMDIO_XSMI_PHYADDR_SHIFT) | (dev_addr << MVMDIO_XSMI_DEVADDR_SHIFT) | MVMDIO_XSMI_READ_OPERATION, dev->regs + MVMDIO_XSMI_MGNT_REG); ret = orion_mdio_wait_ready(&orion_mdio_xsmi_ops, bus); if (ret < 0) return ret; if (!(readl(dev->regs + MVMDIO_XSMI_MGNT_REG) & MVMDIO_XSMI_READ_VALID)) { dev_err(bus->parent, "XSMI bus read not valid\n"); return -ENODEV; } return readl(dev->regs + MVMDIO_XSMI_MGNT_REG) & GENMASK(15, 0); } static int orion_mdio_xsmi_write_c45(struct mii_bus *bus, int mii_id, int dev_addr, int regnum, u16 value) { struct orion_mdio_dev *dev = bus->priv; int ret; ret = orion_mdio_wait_ready(&orion_mdio_xsmi_ops, bus); if (ret < 0) return ret; writel(regnum, dev->regs + MVMDIO_XSMI_ADDR_REG); writel((mii_id << MVMDIO_XSMI_PHYADDR_SHIFT) | (dev_addr << MVMDIO_XSMI_DEVADDR_SHIFT) | MVMDIO_XSMI_WRITE_OPERATION | value, dev->regs + MVMDIO_XSMI_MGNT_REG); return 0; } static irqreturn_t orion_mdio_err_irq(int irq, void *dev_id) { struct orion_mdio_dev *dev = dev_id; if (readl(dev->regs + MVMDIO_ERR_INT_CAUSE) & MVMDIO_ERR_INT_SMI_DONE) { writel(~MVMDIO_ERR_INT_SMI_DONE, dev->regs + MVMDIO_ERR_INT_CAUSE); wake_up(&dev->smi_busy_wait); return IRQ_HANDLED; } return IRQ_NONE; } static int orion_mdio_probe(struct platform_device *pdev) { enum orion_mdio_bus_type type; struct resource *r; struct mii_bus *bus; struct orion_mdio_dev *dev; int i, ret; type = (enum orion_mdio_bus_type)device_get_match_data(&pdev->dev); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!r) { dev_err(&pdev->dev, "No SMI register address given\n"); return -ENODEV; } bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(struct orion_mdio_dev)); if (!bus) return -ENOMEM; switch (type) { case BUS_TYPE_SMI: bus->read = orion_mdio_smi_read; bus->write = orion_mdio_smi_write; break; case BUS_TYPE_XSMI: bus->read_c45 = orion_mdio_xsmi_read_c45; bus->write_c45 = orion_mdio_xsmi_write_c45; break; } bus->name = "orion_mdio_bus"; snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(&pdev->dev)); bus->parent = &pdev->dev; dev = bus->priv; dev->regs = devm_ioremap(&pdev->dev, r->start, resource_size(r)); if (!dev->regs) { dev_err(&pdev->dev, "Unable to remap SMI register\n"); return -ENODEV; } init_waitqueue_head(&dev->smi_busy_wait); if (pdev->dev.of_node) { for (i = 0; i < ARRAY_SIZE(dev->clk); i++) { dev->clk[i] = of_clk_get(pdev->dev.of_node, i); if (PTR_ERR(dev->clk[i]) == -EPROBE_DEFER) { ret = -EPROBE_DEFER; goto out_clk; } if (IS_ERR(dev->clk[i])) break; clk_prepare_enable(dev->clk[i]); } if (!IS_ERR(of_clk_get(pdev->dev.of_node, ARRAY_SIZE(dev->clk)))) dev_warn(&pdev->dev, "unsupported number of clocks, limiting to the first " __stringify(ARRAY_SIZE(dev->clk)) "\n"); } else { dev->clk[0] = clk_get(&pdev->dev, NULL); if (PTR_ERR(dev->clk[0]) == -EPROBE_DEFER) { ret = -EPROBE_DEFER; goto out_clk; } if (!IS_ERR(dev->clk[0])) clk_prepare_enable(dev->clk[0]); } dev->err_interrupt = platform_get_irq_optional(pdev, 0); if (dev->err_interrupt > 0 && resource_size(r) < MVMDIO_ERR_INT_MASK + 4) { dev_err(&pdev->dev, "disabling interrupt, resource size is too small\n"); dev->err_interrupt = 0; } if (dev->err_interrupt > 0) { ret = devm_request_irq(&pdev->dev, dev->err_interrupt, orion_mdio_err_irq, IRQF_SHARED, pdev->name, dev); if (ret) goto out_mdio; writel(MVMDIO_ERR_INT_SMI_DONE, dev->regs + MVMDIO_ERR_INT_MASK); } else if (dev->err_interrupt == -EPROBE_DEFER) { ret = -EPROBE_DEFER; goto out_mdio; } /* For the platforms not supporting DT/ACPI fall-back * to mdiobus_register via of_mdiobus_register. */ if (is_acpi_node(pdev->dev.fwnode)) ret = acpi_mdiobus_register(bus, pdev->dev.fwnode); else ret = of_mdiobus_register(bus, pdev->dev.of_node); if (ret < 0) { dev_err(&pdev->dev, "Cannot register MDIO bus (%d)\n", ret); goto out_mdio; } platform_set_drvdata(pdev, bus); return 0; out_mdio: if (dev->err_interrupt > 0) writel(0, dev->regs + MVMDIO_ERR_INT_MASK); out_clk: for (i = 0; i < ARRAY_SIZE(dev->clk); i++) { if (IS_ERR(dev->clk[i])) break; clk_disable_unprepare(dev->clk[i]); clk_put(dev->clk[i]); } return ret; } static int orion_mdio_remove(struct platform_device *pdev) { struct mii_bus *bus = platform_get_drvdata(pdev); struct orion_mdio_dev *dev = bus->priv; int i; if (dev->err_interrupt > 0) writel(0, dev->regs + MVMDIO_ERR_INT_MASK); mdiobus_unregister(bus); for (i = 0; i < ARRAY_SIZE(dev->clk); i++) { if (IS_ERR(dev->clk[i])) break; clk_disable_unprepare(dev->clk[i]); clk_put(dev->clk[i]); } return 0; } static const struct of_device_id orion_mdio_match[] = { { .compatible = "marvell,orion-mdio", .data = (void *)BUS_TYPE_SMI }, { .compatible = "marvell,xmdio", .data = (void *)BUS_TYPE_XSMI }, { } }; MODULE_DEVICE_TABLE(of, orion_mdio_match); #ifdef CONFIG_ACPI static const struct acpi_device_id orion_mdio_acpi_match[] = { { "MRVL0100", BUS_TYPE_SMI }, { "MRVL0101", BUS_TYPE_XSMI }, { }, }; MODULE_DEVICE_TABLE(acpi, orion_mdio_acpi_match); #endif static struct platform_driver orion_mdio_driver = { .probe = orion_mdio_probe, .remove = orion_mdio_remove, .driver = { .name = "orion-mdio", .of_match_table = orion_mdio_match, .acpi_match_table = ACPI_PTR(orion_mdio_acpi_match), }, }; module_platform_driver(orion_mdio_driver); MODULE_DESCRIPTION("Marvell MDIO interface driver"); MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:orion-mdio");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1