Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
VSR Burru | 284 | 100.00% | 1 | 100.00% |
Total | 284 | 1 |
/* SPDX-License-Identifier: GPL-2.0 */ /* Marvell Octeon EP (EndPoint) Ethernet Driver * * Copyright (C) 2020 Marvell. * */ #ifndef _OCTEP_RX_H_ #define _OCTEP_RX_H_ /* struct octep_oq_desc_hw - Octeon Hardware OQ descriptor format. * * The descriptor ring is made of descriptors which have 2 64-bit values: * * @buffer_ptr: DMA address of the skb->data * @info_ptr: DMA address of host memory, used to update pkt count by hw. * This is currently unused to save pci writes. */ struct octep_oq_desc_hw { dma_addr_t buffer_ptr; u64 info_ptr; }; #define OCTEP_OQ_DESC_SIZE (sizeof(struct octep_oq_desc_hw)) #define OCTEP_CSUM_L4_VERIFIED 0x1 #define OCTEP_CSUM_IP_VERIFIED 0x2 #define OCTEP_CSUM_VERIFIED (OCTEP_CSUM_L4_VERIFIED | OCTEP_CSUM_IP_VERIFIED) /* Extended Response Header in packet data received from Hardware. * Includes metadata like checksum status. * this is valid only if hardware/firmware published support for this. * This is at offset 0 of packet data (skb->data). */ struct octep_oq_resp_hw_ext { /* Reserved. */ u64 reserved:62; /* checksum verified. */ u64 csum_verified:2; }; #define OCTEP_OQ_RESP_HW_EXT_SIZE (sizeof(struct octep_oq_resp_hw_ext)) /* Length of Rx packet DMA'ed by Octeon to Host. * this is in bigendian; so need to be converted to cpu endian. * Octeon writes this at the beginning of Rx buffer (skb->data). */ struct octep_oq_resp_hw { /* The Length of the packet. */ __be64 length; }; #define OCTEP_OQ_RESP_HW_SIZE (sizeof(struct octep_oq_resp_hw)) /* Pointer to data buffer. * Driver keeps a pointer to the data buffer that it made available to * the Octeon device. Since the descriptor ring keeps physical (bus) * addresses, this field is required for the driver to keep track of * the virtual address pointers. The fields are operated by * OS-dependent routines. */ struct octep_rx_buffer { struct page *page; /* length from rx hardware descriptor after converting to cpu endian */ u64 len; }; #define OCTEP_OQ_RECVBUF_SIZE (sizeof(struct octep_rx_buffer)) /* Output Queue statistics. Each output queue has four stats fields. */ struct octep_oq_stats { /* Number of packets received from the Device. */ u64 packets; /* Number of bytes received from the Device. */ u64 bytes; /* Number of times failed to allocate buffers. */ u64 alloc_failures; }; #define OCTEP_OQ_STATS_SIZE (sizeof(struct octep_oq_stats)) /* Hardware interface Rx statistics */ struct octep_iface_rx_stats { /* Received packets */ u64 pkts; /* Octets of received packets */ u64 octets; /* Received PAUSE and Control packets */ u64 pause_pkts; /* Received PAUSE and Control octets */ u64 pause_octets; /* Filtered DMAC0 packets */ u64 dmac0_pkts; /* Filtered DMAC0 octets */ u64 dmac0_octets; /* Packets dropped due to RX FIFO full */ u64 dropped_pkts_fifo_full; /* Octets dropped due to RX FIFO full */ u64 dropped_octets_fifo_full; /* Error packets */ u64 err_pkts; /* Filtered DMAC1 packets */ u64 dmac1_pkts; /* Filtered DMAC1 octets */ u64 dmac1_octets; /* NCSI-bound packets dropped */ u64 ncsi_dropped_pkts; /* NCSI-bound octets dropped */ u64 ncsi_dropped_octets; /* Multicast packets received. */ u64 mcast_pkts; /* Broadcast packets received. */ u64 bcast_pkts; }; /* The Descriptor Ring Output Queue structure. * This structure has all the information required to implement a * Octeon OQ. */ struct octep_oq { u32 q_no; struct octep_device *octep_dev; struct net_device *netdev; struct device *dev; struct napi_struct *napi; /* The receive buffer list. This list has the virtual addresses * of the buffers. */ struct octep_rx_buffer *buff_info; /* Pointer to the mapped packet credit register. * Host writes number of info/buffer ptrs available to this register */ u8 __iomem *pkts_credit_reg; /* Pointer to the mapped packet sent register. * Octeon writes the number of packets DMA'ed to host memory * in this register. */ u8 __iomem *pkts_sent_reg; /* Statistics for this OQ. */ struct octep_oq_stats stats; /* Packets pending to be processed */ u32 pkts_pending; u32 last_pkt_count; /* Index in the ring where the driver should read the next packet */ u32 host_read_idx; /* Number of descriptors in this ring. */ u32 max_count; u32 ring_size_mask; /* The number of descriptors pending refill. */ u32 refill_count; /* Index in the ring where the driver will refill the * descriptor's buffer */ u32 host_refill_idx; u32 refill_threshold; /* The size of each buffer pointed by the buffer pointer. */ u32 buffer_size; u32 max_single_buffer_size; /* The 8B aligned descriptor ring starts at this address. */ struct octep_oq_desc_hw *desc_ring; /* DMA mapped address of the OQ descriptor ring. */ dma_addr_t desc_ring_dma; }; #define OCTEP_OQ_SIZE (sizeof(struct octep_oq)) #endif /* _OCTEP_RX_H_ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1