| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Kalle Valo | 1614 | 70.85% | 2 | 25.00% |
| Karthikeyan Periyasamy | 542 | 23.79% | 1 | 12.50% |
| Baochen Qiang | 89 | 3.91% | 1 | 12.50% |
| John Crispin | 28 | 1.23% | 1 | 12.50% |
| Gustavo A. R. Silva | 3 | 0.13% | 1 | 12.50% |
| Manikanta Pubbisetty | 1 | 0.04% | 1 | 12.50% |
| Jeff Johnson | 1 | 0.04% | 1 | 12.50% |
| Total | 2278 | 8 |
/* SPDX-License-Identifier: BSD-3-Clause-Clear */ /* * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. */ #ifndef ATH11K_RX_DESC_H #define ATH11K_RX_DESC_H enum rx_desc_rxpcu_filter { RX_DESC_RXPCU_FILTER_PASS, RX_DESC_RXPCU_FILTER_MONITOR_CLIENT, RX_DESC_RXPCU_FILTER_MONITOR_OTHER, }; /* rxpcu_filter_pass * This MPDU passed the normal frame filter programming of rxpcu. * * rxpcu_filter_monitor_client * This MPDU did not pass the regular frame filter and would * have been dropped, were it not for the frame fitting into the * 'monitor_client' category. * * rxpcu_filter_monitor_other * This MPDU did not pass the regular frame filter and also did * not pass the rxpcu_monitor_client filter. It would have been * dropped accept that it did pass the 'monitor_other' category. */ #define RX_DESC_INFO0_RXPCU_MPDU_FITLER GENMASK(1, 0) #define RX_DESC_INFO0_SW_FRAME_GRP_ID GENMASK(8, 2) enum rx_desc_sw_frame_grp_id { RX_DESC_SW_FRAME_GRP_ID_NDP_FRAME, RX_DESC_SW_FRAME_GRP_ID_MCAST_DATA, RX_DESC_SW_FRAME_GRP_ID_UCAST_DATA, RX_DESC_SW_FRAME_GRP_ID_NULL_DATA, RX_DESC_SW_FRAME_GRP_ID_MGMT_0000, RX_DESC_SW_FRAME_GRP_ID_MGMT_0001, RX_DESC_SW_FRAME_GRP_ID_MGMT_0010, RX_DESC_SW_FRAME_GRP_ID_MGMT_0011, RX_DESC_SW_FRAME_GRP_ID_MGMT_0100, RX_DESC_SW_FRAME_GRP_ID_MGMT_0101, RX_DESC_SW_FRAME_GRP_ID_MGMT_0110, RX_DESC_SW_FRAME_GRP_ID_MGMT_0111, RX_DESC_SW_FRAME_GRP_ID_MGMT_1000, RX_DESC_SW_FRAME_GRP_ID_MGMT_1001, RX_DESC_SW_FRAME_GRP_ID_MGMT_1010, RX_DESC_SW_FRAME_GRP_ID_MGMT_1011, RX_DESC_SW_FRAME_GRP_ID_MGMT_1100, RX_DESC_SW_FRAME_GRP_ID_MGMT_1101, RX_DESC_SW_FRAME_GRP_ID_MGMT_1110, RX_DESC_SW_FRAME_GRP_ID_MGMT_1111, RX_DESC_SW_FRAME_GRP_ID_CTRL_0000, RX_DESC_SW_FRAME_GRP_ID_CTRL_0001, RX_DESC_SW_FRAME_GRP_ID_CTRL_0010, RX_DESC_SW_FRAME_GRP_ID_CTRL_0011, RX_DESC_SW_FRAME_GRP_ID_CTRL_0100, RX_DESC_SW_FRAME_GRP_ID_CTRL_0101, RX_DESC_SW_FRAME_GRP_ID_CTRL_0110, RX_DESC_SW_FRAME_GRP_ID_CTRL_0111, RX_DESC_SW_FRAME_GRP_ID_CTRL_1000, RX_DESC_SW_FRAME_GRP_ID_CTRL_1001, RX_DESC_SW_FRAME_GRP_ID_CTRL_1010, RX_DESC_SW_FRAME_GRP_ID_CTRL_1011, RX_DESC_SW_FRAME_GRP_ID_CTRL_1100, RX_DESC_SW_FRAME_GRP_ID_CTRL_1101, RX_DESC_SW_FRAME_GRP_ID_CTRL_1110, RX_DESC_SW_FRAME_GRP_ID_CTRL_1111, RX_DESC_SW_FRAME_GRP_ID_UNSUPPORTED, RX_DESC_SW_FRAME_GRP_ID_PHY_ERR, }; enum rx_desc_decap_type { RX_DESC_DECAP_TYPE_RAW, RX_DESC_DECAP_TYPE_NATIVE_WIFI, RX_DESC_DECAP_TYPE_ETHERNET2_DIX, RX_DESC_DECAP_TYPE_8023, }; enum rx_desc_decrypt_status_code { RX_DESC_DECRYPT_STATUS_CODE_OK, RX_DESC_DECRYPT_STATUS_CODE_UNPROTECTED_FRAME, RX_DESC_DECRYPT_STATUS_CODE_DATA_ERR, RX_DESC_DECRYPT_STATUS_CODE_KEY_INVALID, RX_DESC_DECRYPT_STATUS_CODE_PEER_ENTRY_INVALID, RX_DESC_DECRYPT_STATUS_CODE_OTHER, }; #define RX_ATTENTION_INFO1_FIRST_MPDU BIT(0) #define RX_ATTENTION_INFO1_RSVD_1A BIT(1) #define RX_ATTENTION_INFO1_MCAST_BCAST BIT(2) #define RX_ATTENTION_INFO1_AST_IDX_NOT_FOUND BIT(3) #define RX_ATTENTION_INFO1_AST_IDX_TIMEDOUT BIT(4) #define RX_ATTENTION_INFO1_POWER_MGMT BIT(5) #define RX_ATTENTION_INFO1_NON_QOS BIT(6) #define RX_ATTENTION_INFO1_NULL_DATA BIT(7) #define RX_ATTENTION_INFO1_MGMT_TYPE BIT(8) #define RX_ATTENTION_INFO1_CTRL_TYPE BIT(9) #define RX_ATTENTION_INFO1_MORE_DATA BIT(10) #define RX_ATTENTION_INFO1_EOSP BIT(11) #define RX_ATTENTION_INFO1_A_MSDU_ERROR BIT(12) #define RX_ATTENTION_INFO1_FRAGMENT BIT(13) #define RX_ATTENTION_INFO1_ORDER BIT(14) #define RX_ATTENTION_INFO1_CCE_MATCH BIT(15) #define RX_ATTENTION_INFO1_OVERFLOW_ERR BIT(16) #define RX_ATTENTION_INFO1_MSDU_LEN_ERR BIT(17) #define RX_ATTENTION_INFO1_TCP_UDP_CKSUM_FAIL BIT(18) #define RX_ATTENTION_INFO1_IP_CKSUM_FAIL BIT(19) #define RX_ATTENTION_INFO1_SA_IDX_INVALID BIT(20) #define RX_ATTENTION_INFO1_DA_IDX_INVALID BIT(21) #define RX_ATTENTION_INFO1_RSVD_1B BIT(22) #define RX_ATTENTION_INFO1_RX_IN_TX_DECRYPT_BYP BIT(23) #define RX_ATTENTION_INFO1_ENCRYPT_REQUIRED BIT(24) #define RX_ATTENTION_INFO1_DIRECTED BIT(25) #define RX_ATTENTION_INFO1_BUFFER_FRAGMENT BIT(26) #define RX_ATTENTION_INFO1_MPDU_LEN_ERR BIT(27) #define RX_ATTENTION_INFO1_TKIP_MIC_ERR BIT(28) #define RX_ATTENTION_INFO1_DECRYPT_ERR BIT(29) #define RX_ATTENTION_INFO1_UNDECRYPT_FRAME_ERR BIT(30) #define RX_ATTENTION_INFO1_FCS_ERR BIT(31) #define RX_ATTENTION_INFO2_FLOW_IDX_TIMEOUT BIT(0) #define RX_ATTENTION_INFO2_FLOW_IDX_INVALID BIT(1) #define RX_ATTENTION_INFO2_WIFI_PARSER_ERR BIT(2) #define RX_ATTENTION_INFO2_AMSDU_PARSER_ERR BIT(3) #define RX_ATTENTION_INFO2_SA_IDX_TIMEOUT BIT(4) #define RX_ATTENTION_INFO2_DA_IDX_TIMEOUT BIT(5) #define RX_ATTENTION_INFO2_MSDU_LIMIT_ERR BIT(6) #define RX_ATTENTION_INFO2_DA_IS_VALID BIT(7) #define RX_ATTENTION_INFO2_DA_IS_MCBC BIT(8) #define RX_ATTENTION_INFO2_SA_IS_VALID BIT(9) #define RX_ATTENTION_INFO2_DCRYPT_STATUS_CODE GENMASK(12, 10) #define RX_ATTENTION_INFO2_RX_BITMAP_NOT_UPDED BIT(13) #define RX_ATTENTION_INFO2_MSDU_DONE BIT(31) struct rx_attention { __le16 info0; __le16 phy_ppdu_id; __le32 info1; __le32 info2; } __packed; /* rx_attention * * rxpcu_mpdu_filter_in_category * Field indicates what the reason was that this mpdu frame * was allowed to come into the receive path by rxpcu. Values * are defined in enum %RX_DESC_RXPCU_FILTER_*. * * sw_frame_group_id * SW processes frames based on certain classifications. Values * are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*. * * phy_ppdu_id * A ppdu counter value that PHY increments for every PPDU * received. The counter value wraps around. * * first_mpdu * Indicates the first MSDU of the PPDU. If both first_mpdu * and last_mpdu are set in the MSDU then this is a not an * A-MPDU frame but a stand alone MPDU. Interior MPDU in an * A-MPDU shall have both first_mpdu and last_mpdu bits set to * 0. The PPDU start status will only be valid when this bit * is set. * * mcast_bcast * Multicast / broadcast indicator. Only set when the MAC * address 1 bit 0 is set indicating mcast/bcast and the BSSID * matches one of the 4 BSSID registers. Only set when * first_msdu is set. * * ast_index_not_found * Only valid when first_msdu is set. Indicates no AST matching * entries within the max search count. * * ast_index_timeout * Only valid when first_msdu is set. Indicates an unsuccessful * search in the address search table due to timeout. * * power_mgmt * Power management bit set in the 802.11 header. Only set * when first_msdu is set. * * non_qos * Set if packet is not a non-QoS data frame. Only set when * first_msdu is set. * * null_data * Set if frame type indicates either null data or QoS null * data format. Only set when first_msdu is set. * * mgmt_type * Set if packet is a management packet. Only set when * first_msdu is set. * * ctrl_type * Set if packet is a control packet. Only set when first_msdu * is set. * * more_data * Set if more bit in frame control is set. Only set when * first_msdu is set. * * eosp * Set if the EOSP (end of service period) bit in the QoS * control field is set. Only set when first_msdu is set. * * a_msdu_error * Set if number of MSDUs in A-MSDU is above a threshold or if the * size of the MSDU is invalid. This receive buffer will contain * all of the remainder of MSDUs in this MPDU w/o decapsulation. * * fragment * Indicates that this is an 802.11 fragment frame. This is * set when either the more_frag bit is set in the frame * control or the fragment number is not zero. Only set when * first_msdu is set. * * order * Set if the order bit in the frame control is set. Only set * when first_msdu is set. * * cce_match * Indicates that this status has a corresponding MSDU that * requires FW processing. The OLE will have classification * ring mask registers which will indicate the ring(s) for * packets and descriptors which need FW attention. * * overflow_err * PCU Receive FIFO does not have enough space to store the * full receive packet. Enough space is reserved in the * receive FIFO for the status is written. This MPDU remaining * packets in the PPDU will be filtered and no Ack response * will be transmitted. * * msdu_length_err * Indicates that the MSDU length from the 802.3 encapsulated * length field extends beyond the MPDU boundary. * * tcp_udp_chksum_fail * Indicates that the computed checksum (tcp_udp_chksum) did * not match the checksum in the TCP/UDP header. * * ip_chksum_fail * Indicates that the computed checksum did not match the * checksum in the IP header. * * sa_idx_invalid * Indicates no matching entry was found in the address search * table for the source MAC address. * * da_idx_invalid * Indicates no matching entry was found in the address search * table for the destination MAC address. * * rx_in_tx_decrypt_byp * Indicates that RX packet is not decrypted as Crypto is busy * with TX packet processing. * * encrypt_required * Indicates that this data type frame is not encrypted even if * the policy for this MPDU requires encryption as indicated in * the peer table key type. * * directed * MPDU is a directed packet which means that the RA matched * our STA addresses. In proxySTA it means that the TA matched * an entry in our address search table with the corresponding * 'no_ack' bit is the address search entry cleared. * * buffer_fragment * Indicates that at least one of the rx buffers has been * fragmented. If set the FW should look at the rx_frag_info * descriptor described below. * * mpdu_length_err * Indicates that the MPDU was pre-maturely terminated * resulting in a truncated MPDU. Don't trust the MPDU length * field. * * tkip_mic_err * Indicates that the MPDU Michael integrity check failed * * decrypt_err * Indicates that the MPDU decrypt integrity check failed * * fcs_err * Indicates that the MPDU FCS check failed * * flow_idx_timeout * Indicates an unsuccessful flow search due to the expiring of * the search timer. * * flow_idx_invalid * flow id is not valid. * * amsdu_parser_error * A-MSDU could not be properly de-agregated. * * sa_idx_timeout * Indicates an unsuccessful search for the source MAC address * due to the expiring of the search timer. * * da_idx_timeout * Indicates an unsuccessful search for the destination MAC * address due to the expiring of the search timer. * * msdu_limit_error * Indicates that the MSDU threshold was exceeded and thus * all the rest of the MSDUs will not be scattered and will not * be decasulated but will be DMA'ed in RAW format as a single * MSDU buffer. * * da_is_valid * Indicates that OLE found a valid DA entry. * * da_is_mcbc * Field Only valid if da_is_valid is set. Indicates the DA address * was a Multicast or Broadcast address. * * sa_is_valid * Indicates that OLE found a valid SA entry. * * decrypt_status_code * Field provides insight into the decryption performed. Values are * defined in enum %RX_DESC_DECRYPT_STATUS_CODE*. * * rx_bitmap_not_updated * Frame is received, but RXPCU could not update the receive bitmap * due to (temporary) fifo constraints. * * msdu_done * If set indicates that the RX packet data, RX header data, RX * PPDU start descriptor, RX MPDU start/end descriptor, RX MSDU * start/end descriptors and RX Attention descriptor are all * valid. This bit must be in the last octet of the * descriptor. */ #define RX_MPDU_START_INFO0_NDP_FRAME BIT(9) #define RX_MPDU_START_INFO0_PHY_ERR BIT(10) #define RX_MPDU_START_INFO0_PHY_ERR_MPDU_HDR BIT(11) #define RX_MPDU_START_INFO0_PROTO_VER_ERR BIT(12) #define RX_MPDU_START_INFO0_AST_LOOKUP_VALID BIT(13) #define RX_MPDU_START_INFO1_MPDU_FCTRL_VALID BIT(0) #define RX_MPDU_START_INFO1_MPDU_DUR_VALID BIT(1) #define RX_MPDU_START_INFO1_MAC_ADDR1_VALID BIT(2) #define RX_MPDU_START_INFO1_MAC_ADDR2_VALID BIT(3) #define RX_MPDU_START_INFO1_MAC_ADDR3_VALID BIT(4) #define RX_MPDU_START_INFO1_MAC_ADDR4_VALID BIT(5) #define RX_MPDU_START_INFO1_MPDU_SEQ_CTRL_VALID BIT(6) #define RX_MPDU_START_INFO1_MPDU_QOS_CTRL_VALID BIT(7) #define RX_MPDU_START_INFO1_MPDU_HT_CTRL_VALID BIT(8) #define RX_MPDU_START_INFO1_ENCRYPT_INFO_VALID BIT(9) #define RX_MPDU_START_INFO1_MPDU_FRAG_NUMBER GENMASK(13, 10) #define RX_MPDU_START_INFO1_MORE_FRAG_FLAG BIT(14) #define RX_MPDU_START_INFO1_FROM_DS BIT(16) #define RX_MPDU_START_INFO1_TO_DS BIT(17) #define RX_MPDU_START_INFO1_ENCRYPTED BIT(18) #define RX_MPDU_START_INFO1_MPDU_RETRY BIT(19) #define RX_MPDU_START_INFO1_MPDU_SEQ_NUM GENMASK(31, 20) #define RX_MPDU_START_INFO2_EPD_EN BIT(0) #define RX_MPDU_START_INFO2_ALL_FRAME_ENCPD BIT(1) #define RX_MPDU_START_INFO2_ENC_TYPE GENMASK(5, 2) #define RX_MPDU_START_INFO2_VAR_WEP_KEY_WIDTH GENMASK(7, 6) #define RX_MPDU_START_INFO2_MESH_STA BIT(8) #define RX_MPDU_START_INFO2_BSSID_HIT BIT(9) #define RX_MPDU_START_INFO2_BSSID_NUM GENMASK(13, 10) #define RX_MPDU_START_INFO2_TID GENMASK(17, 14) #define RX_MPDU_START_INFO2_TID_WCN6855 GENMASK(18, 15) #define RX_MPDU_START_INFO3_REO_DEST_IND GENMASK(4, 0) #define RX_MPDU_START_INFO3_FLOW_ID_TOEPLITZ BIT(7) #define RX_MPDU_START_INFO3_PKT_SEL_FP_UCAST_DATA BIT(8) #define RX_MPDU_START_INFO3_PKT_SEL_FP_MCAST_DATA BIT(9) #define RX_MPDU_START_INFO3_PKT_SEL_FP_CTRL_BAR BIT(10) #define RX_MPDU_START_INFO3_RXDMA0_SRC_RING_SEL GENMASK(12, 11) #define RX_MPDU_START_INFO3_RXDMA0_DST_RING_SEL GENMASK(14, 13) #define RX_MPDU_START_INFO4_REO_QUEUE_DESC_HI GENMASK(7, 0) #define RX_MPDU_START_INFO4_RECV_QUEUE_NUM GENMASK(23, 8) #define RX_MPDU_START_INFO4_PRE_DELIM_ERR_WARN BIT(24) #define RX_MPDU_START_INFO4_FIRST_DELIM_ERR BIT(25) #define RX_MPDU_START_INFO5_KEY_ID GENMASK(7, 0) #define RX_MPDU_START_INFO5_NEW_PEER_ENTRY BIT(8) #define RX_MPDU_START_INFO5_DECRYPT_NEEDED BIT(9) #define RX_MPDU_START_INFO5_DECAP_TYPE GENMASK(11, 10) #define RX_MPDU_START_INFO5_VLAN_TAG_C_PADDING BIT(12) #define RX_MPDU_START_INFO5_VLAN_TAG_S_PADDING BIT(13) #define RX_MPDU_START_INFO5_STRIP_VLAN_TAG_C BIT(14) #define RX_MPDU_START_INFO5_STRIP_VLAN_TAG_S BIT(15) #define RX_MPDU_START_INFO5_PRE_DELIM_COUNT GENMASK(27, 16) #define RX_MPDU_START_INFO5_AMPDU_FLAG BIT(28) #define RX_MPDU_START_INFO5_BAR_FRAME BIT(29) #define RX_MPDU_START_INFO6_MPDU_LEN GENMASK(13, 0) #define RX_MPDU_START_INFO6_FIRST_MPDU BIT(14) #define RX_MPDU_START_INFO6_MCAST_BCAST BIT(15) #define RX_MPDU_START_INFO6_AST_IDX_NOT_FOUND BIT(16) #define RX_MPDU_START_INFO6_AST_IDX_TIMEOUT BIT(17) #define RX_MPDU_START_INFO6_POWER_MGMT BIT(18) #define RX_MPDU_START_INFO6_NON_QOS BIT(19) #define RX_MPDU_START_INFO6_NULL_DATA BIT(20) #define RX_MPDU_START_INFO6_MGMT_TYPE BIT(21) #define RX_MPDU_START_INFO6_CTRL_TYPE BIT(22) #define RX_MPDU_START_INFO6_MORE_DATA BIT(23) #define RX_MPDU_START_INFO6_EOSP BIT(24) #define RX_MPDU_START_INFO6_FRAGMENT BIT(25) #define RX_MPDU_START_INFO6_ORDER BIT(26) #define RX_MPDU_START_INFO6_UAPSD_TRIGGER BIT(27) #define RX_MPDU_START_INFO6_ENCRYPT_REQUIRED BIT(28) #define RX_MPDU_START_INFO6_DIRECTED BIT(29) #define RX_MPDU_START_RAW_MPDU BIT(0) struct rx_mpdu_start_ipq8074 { __le16 info0; __le16 phy_ppdu_id; __le16 ast_index; __le16 sw_peer_id; __le32 info1; __le32 info2; __le32 pn[4]; __le32 peer_meta_data; __le32 info3; __le32 reo_queue_desc_lo; __le32 info4; __le32 info5; __le32 info6; __le16 frame_ctrl; __le16 duration; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; __le16 seq_ctrl; u8 addr4[ETH_ALEN]; __le16 qos_ctrl; __le32 ht_ctrl; __le32 raw; } __packed; #define RX_MPDU_START_INFO7_REO_DEST_IND GENMASK(4, 0) #define RX_MPDU_START_INFO7_LMAC_PEER_ID_MSB GENMASK(6, 5) #define RX_MPDU_START_INFO7_FLOW_ID_TOEPLITZ BIT(7) #define RX_MPDU_START_INFO7_PKT_SEL_FP_UCAST_DATA BIT(8) #define RX_MPDU_START_INFO7_PKT_SEL_FP_MCAST_DATA BIT(9) #define RX_MPDU_START_INFO7_PKT_SEL_FP_CTRL_BAR BIT(10) #define RX_MPDU_START_INFO7_RXDMA0_SRC_RING_SEL GENMASK(12, 11) #define RX_MPDU_START_INFO7_RXDMA0_DST_RING_SEL GENMASK(14, 13) #define RX_MPDU_START_INFO8_REO_QUEUE_DESC_HI GENMASK(7, 0) #define RX_MPDU_START_INFO8_RECV_QUEUE_NUM GENMASK(23, 8) #define RX_MPDU_START_INFO8_PRE_DELIM_ERR_WARN BIT(24) #define RX_MPDU_START_INFO8_FIRST_DELIM_ERR BIT(25) #define RX_MPDU_START_INFO9_EPD_EN BIT(0) #define RX_MPDU_START_INFO9_ALL_FRAME_ENCPD BIT(1) #define RX_MPDU_START_INFO9_ENC_TYPE GENMASK(5, 2) #define RX_MPDU_START_INFO9_VAR_WEP_KEY_WIDTH GENMASK(7, 6) #define RX_MPDU_START_INFO9_MESH_STA GENMASK(9, 8) #define RX_MPDU_START_INFO9_BSSID_HIT BIT(10) #define RX_MPDU_START_INFO9_BSSID_NUM GENMASK(14, 11) #define RX_MPDU_START_INFO9_TID GENMASK(18, 15) #define RX_MPDU_START_INFO10_RXPCU_MPDU_FLTR GENMASK(1, 0) #define RX_MPDU_START_INFO10_SW_FRAME_GRP_ID GENMASK(8, 2) #define RX_MPDU_START_INFO10_NDP_FRAME BIT(9) #define RX_MPDU_START_INFO10_PHY_ERR BIT(10) #define RX_MPDU_START_INFO10_PHY_ERR_MPDU_HDR BIT(11) #define RX_MPDU_START_INFO10_PROTO_VER_ERR BIT(12) #define RX_MPDU_START_INFO10_AST_LOOKUP_VALID BIT(13) #define RX_MPDU_START_INFO11_MPDU_FCTRL_VALID BIT(0) #define RX_MPDU_START_INFO11_MPDU_DUR_VALID BIT(1) #define RX_MPDU_START_INFO11_MAC_ADDR1_VALID BIT(2) #define RX_MPDU_START_INFO11_MAC_ADDR2_VALID BIT(3) #define RX_MPDU_START_INFO11_MAC_ADDR3_VALID BIT(4) #define RX_MPDU_START_INFO11_MAC_ADDR4_VALID BIT(5) #define RX_MPDU_START_INFO11_MPDU_SEQ_CTRL_VALID BIT(6) #define RX_MPDU_START_INFO11_MPDU_QOS_CTRL_VALID BIT(7) #define RX_MPDU_START_INFO11_MPDU_HT_CTRL_VALID BIT(8) #define RX_MPDU_START_INFO11_ENCRYPT_INFO_VALID BIT(9) #define RX_MPDU_START_INFO11_MPDU_FRAG_NUMBER GENMASK(13, 10) #define RX_MPDU_START_INFO11_MORE_FRAG_FLAG BIT(14) #define RX_MPDU_START_INFO11_FROM_DS BIT(16) #define RX_MPDU_START_INFO11_TO_DS BIT(17) #define RX_MPDU_START_INFO11_ENCRYPTED BIT(18) #define RX_MPDU_START_INFO11_MPDU_RETRY BIT(19) #define RX_MPDU_START_INFO11_MPDU_SEQ_NUM GENMASK(31, 20) #define RX_MPDU_START_INFO12_KEY_ID GENMASK(7, 0) #define RX_MPDU_START_INFO12_NEW_PEER_ENTRY BIT(8) #define RX_MPDU_START_INFO12_DECRYPT_NEEDED BIT(9) #define RX_MPDU_START_INFO12_DECAP_TYPE GENMASK(11, 10) #define RX_MPDU_START_INFO12_VLAN_TAG_C_PADDING BIT(12) #define RX_MPDU_START_INFO12_VLAN_TAG_S_PADDING BIT(13) #define RX_MPDU_START_INFO12_STRIP_VLAN_TAG_C BIT(14) #define RX_MPDU_START_INFO12_STRIP_VLAN_TAG_S BIT(15) #define RX_MPDU_START_INFO12_PRE_DELIM_COUNT GENMASK(27, 16) #define RX_MPDU_START_INFO12_AMPDU_FLAG BIT(28) #define RX_MPDU_START_INFO12_BAR_FRAME BIT(29) #define RX_MPDU_START_INFO12_RAW_MPDU BIT(30) #define RX_MPDU_START_INFO13_MPDU_LEN GENMASK(13, 0) #define RX_MPDU_START_INFO13_FIRST_MPDU BIT(14) #define RX_MPDU_START_INFO13_MCAST_BCAST BIT(15) #define RX_MPDU_START_INFO13_AST_IDX_NOT_FOUND BIT(16) #define RX_MPDU_START_INFO13_AST_IDX_TIMEOUT BIT(17) #define RX_MPDU_START_INFO13_POWER_MGMT BIT(18) #define RX_MPDU_START_INFO13_NON_QOS BIT(19) #define RX_MPDU_START_INFO13_NULL_DATA BIT(20) #define RX_MPDU_START_INFO13_MGMT_TYPE BIT(21) #define RX_MPDU_START_INFO13_CTRL_TYPE BIT(22) #define RX_MPDU_START_INFO13_MORE_DATA BIT(23) #define RX_MPDU_START_INFO13_EOSP BIT(24) #define RX_MPDU_START_INFO13_FRAGMENT BIT(25) #define RX_MPDU_START_INFO13_ORDER BIT(26) #define RX_MPDU_START_INFO13_UAPSD_TRIGGER BIT(27) #define RX_MPDU_START_INFO13_ENCRYPT_REQUIRED BIT(28) #define RX_MPDU_START_INFO13_DIRECTED BIT(29) #define RX_MPDU_START_INFO13_AMSDU_PRESENT BIT(30) struct rx_mpdu_start_qcn9074 { __le32 info7; __le32 reo_queue_desc_lo; __le32 info8; __le32 pn[4]; __le32 info9; __le32 peer_meta_data; __le16 info10; __le16 phy_ppdu_id; __le16 ast_index; __le16 sw_peer_id; __le32 info11; __le32 info12; __le32 info13; __le16 frame_ctrl; __le16 duration; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; __le16 seq_ctrl; u8 addr4[ETH_ALEN]; __le16 qos_ctrl; __le32 ht_ctrl; } __packed; struct rx_mpdu_start_wcn6855 { __le32 info3; __le32 reo_queue_desc_lo; __le32 info4; __le32 pn[4]; __le32 info2; __le32 peer_meta_data; __le16 info0; __le16 phy_ppdu_id; __le16 ast_index; __le16 sw_peer_id; __le32 info1; __le32 info5; __le32 info6; __le16 frame_ctrl; __le16 duration; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; __le16 seq_ctrl; u8 addr4[ETH_ALEN]; __le16 qos_ctrl; __le32 ht_ctrl; } __packed; /* rx_mpdu_start * * rxpcu_mpdu_filter_in_category * Field indicates what the reason was that this mpdu frame * was allowed to come into the receive path by rxpcu. Values * are defined in enum %RX_DESC_RXPCU_FILTER_*. * Note: for ndp frame, if it was expected because the preceding * NDPA was filter_pass, the setting rxpcu_filter_pass will be * used. This setting will also be used for every ndp frame in * case Promiscuous mode is enabled. * * sw_frame_group_id * SW processes frames based on certain classifications. Values * are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*. * * ndp_frame * Indicates that the received frame was an NDP frame. * * phy_err * Indicates that PHY error was received before MAC received data. * * phy_err_during_mpdu_header * PHY error was received before MAC received the complete MPDU * header which was needed for proper decoding. * * protocol_version_err * RXPCU detected a version error in the frame control field. * * ast_based_lookup_valid * AST based lookup for this frame has found a valid result. * * phy_ppdu_id * A ppdu counter value that PHY increments for every PPDU * received. The counter value wraps around. * * ast_index * This field indicates the index of the AST entry corresponding * to this MPDU. It is provided by the GSE module instantiated in * RXPCU. A value of 0xFFFF indicates an invalid AST index. * * sw_peer_id * This field indicates a unique peer identifier. It is set equal * to field 'sw_peer_id' from the AST entry. * * mpdu_frame_control_valid, mpdu_duration_valid, mpdu_qos_control_valid, * mpdu_ht_control_valid, frame_encryption_info_valid * Indicates that each fields have valid entries. * * mac_addr_adx_valid * Corresponding mac_addr_adx_{lo/hi} has valid entries. * * from_ds, to_ds * Valid only when mpdu_frame_control_valid is set. Indicates that * frame is received from DS and sent to DS. * * encrypted * Protected bit from the frame control. * * mpdu_retry * Retry bit from frame control. Only valid when first_msdu is set. * * mpdu_sequence_number * The sequence number from the 802.11 header. * * epd_en * If set, use EPD instead of LPD. * * all_frames_shall_be_encrypted * If set, all frames (data only?) shall be encrypted. If not, * RX CRYPTO shall set an error flag. * * encrypt_type * Values are defined in enum %HAL_ENCRYPT_TYPE_. * * mesh_sta * Indicates a Mesh (11s) STA. * * bssid_hit * BSSID of the incoming frame matched one of the 8 BSSID * register values. * * bssid_number * This number indicates which one out of the 8 BSSID register * values matched the incoming frame. * * tid * TID field in the QoS control field * * pn * The PN number. * * peer_meta_data * Meta data that SW has programmed in the Peer table entry * of the transmitting STA. * * rx_reo_queue_desc_addr_lo * Address (lower 32 bits) of the REO queue descriptor. * * rx_reo_queue_desc_addr_hi * Address (upper 8 bits) of the REO queue descriptor. * * receive_queue_number * Indicates the MPDU queue ID to which this MPDU link * descriptor belongs. * * pre_delim_err_warning * Indicates that a delimiter FCS error was found in between the * previous MPDU and this MPDU. Note that this is just a warning, * and does not mean that this MPDU is corrupted in any way. If * it is, there will be other errors indicated such as FCS or * decrypt errors. * * first_delim_err * Indicates that the first delimiter had a FCS failure. * * key_id * The key ID octet from the IV. * * new_peer_entry * Set if new RX_PEER_ENTRY TLV follows. If clear, RX_PEER_ENTRY * doesn't follow so RX DECRYPTION module either uses old peer * entry or not decrypt. * * decrypt_needed * When RXPCU sets bit 'ast_index_not_found or ast_index_timeout', * RXPCU will also ensure that this bit is NOT set. CRYPTO for that * reason only needs to evaluate this bit and non of the other ones * * decap_type * Used by the OLE during decapsulation. Values are defined in * enum %MPDU_START_DECAP_TYPE_*. * * rx_insert_vlan_c_tag_padding * rx_insert_vlan_s_tag_padding * Insert 4 byte of all zeros as VLAN tag or double VLAN tag if * the rx payload does not have VLAN. * * strip_vlan_c_tag_decap * strip_vlan_s_tag_decap * Strip VLAN or double VLAN during decapsulation. * * pre_delim_count * The number of delimiters before this MPDU. Note that this * number is cleared at PPDU start. If this MPDU is the first * received MPDU in the PPDU and this MPDU gets filtered-in, * this field will indicate the number of delimiters located * after the last MPDU in the previous PPDU. * * If this MPDU is located after the first received MPDU in * an PPDU, this field will indicate the number of delimiters * located between the previous MPDU and this MPDU. * * ampdu_flag * Received frame was part of an A-MPDU. * * bar_frame * Received frame is a BAR frame * * mpdu_length * MPDU length before decapsulation. * * first_mpdu..directed * See definition in RX attention descriptor * */ enum rx_msdu_start_pkt_type { RX_MSDU_START_PKT_TYPE_11A, RX_MSDU_START_PKT_TYPE_11B, RX_MSDU_START_PKT_TYPE_11N, RX_MSDU_START_PKT_TYPE_11AC, RX_MSDU_START_PKT_TYPE_11AX, }; enum rx_msdu_start_sgi { RX_MSDU_START_SGI_0_8_US, RX_MSDU_START_SGI_0_4_US, RX_MSDU_START_SGI_1_6_US, RX_MSDU_START_SGI_3_2_US, }; enum rx_msdu_start_recv_bw { RX_MSDU_START_RECV_BW_20MHZ, RX_MSDU_START_RECV_BW_40MHZ, RX_MSDU_START_RECV_BW_80MHZ, RX_MSDU_START_RECV_BW_160MHZ, }; enum rx_msdu_start_reception_type { RX_MSDU_START_RECEPTION_TYPE_SU, RX_MSDU_START_RECEPTION_TYPE_DL_MU_MIMO, RX_MSDU_START_RECEPTION_TYPE_DL_MU_OFDMA, RX_MSDU_START_RECEPTION_TYPE_DL_MU_OFDMA_MIMO, RX_MSDU_START_RECEPTION_TYPE_UL_MU_MIMO, RX_MSDU_START_RECEPTION_TYPE_UL_MU_OFDMA, RX_MSDU_START_RECEPTION_TYPE_UL_MU_OFDMA_MIMO, }; #define RX_MSDU_START_INFO1_MSDU_LENGTH GENMASK(13, 0) #define RX_MSDU_START_INFO1_RSVD_1A BIT(14) #define RX_MSDU_START_INFO1_IPSEC_ESP BIT(15) #define RX_MSDU_START_INFO1_L3_OFFSET GENMASK(22, 16) #define RX_MSDU_START_INFO1_IPSEC_AH BIT(23) #define RX_MSDU_START_INFO1_L4_OFFSET GENMASK(31, 24) #define RX_MSDU_START_INFO2_MSDU_NUMBER GENMASK(7, 0) #define RX_MSDU_START_INFO2_DECAP_TYPE GENMASK(9, 8) #define RX_MSDU_START_INFO2_IPV4 BIT(10) #define RX_MSDU_START_INFO2_IPV6 BIT(11) #define RX_MSDU_START_INFO2_TCP BIT(12) #define RX_MSDU_START_INFO2_UDP BIT(13) #define RX_MSDU_START_INFO2_IP_FRAG BIT(14) #define RX_MSDU_START_INFO2_TCP_ONLY_ACK BIT(15) #define RX_MSDU_START_INFO2_DA_IS_BCAST_MCAST BIT(16) #define RX_MSDU_START_INFO2_SELECTED_TOEPLITZ_HASH GENMASK(18, 17) #define RX_MSDU_START_INFO2_IP_FIXED_HDR_VALID BIT(19) #define RX_MSDU_START_INFO2_IP_EXTN_HDR_VALID BIT(20) #define RX_MSDU_START_INFO2_IP_TCP_UDP_HDR_VALID BIT(21) #define RX_MSDU_START_INFO2_MESH_CTRL_PRESENT BIT(22) #define RX_MSDU_START_INFO2_LDPC BIT(23) #define RX_MSDU_START_INFO2_IP4_IP6_NXT_HDR GENMASK(31, 24) #define RX_MSDU_START_INFO2_DECAP_FORMAT GENMASK(9, 8) #define RX_MSDU_START_INFO3_USER_RSSI GENMASK(7, 0) #define RX_MSDU_START_INFO3_PKT_TYPE GENMASK(11, 8) #define RX_MSDU_START_INFO3_STBC BIT(12) #define RX_MSDU_START_INFO3_SGI GENMASK(14, 13) #define RX_MSDU_START_INFO3_RATE_MCS GENMASK(18, 15) #define RX_MSDU_START_INFO3_RECV_BW GENMASK(20, 19) #define RX_MSDU_START_INFO3_RECEPTION_TYPE GENMASK(23, 21) #define RX_MSDU_START_INFO3_MIMO_SS_BITMAP GENMASK(31, 24) struct rx_msdu_start_ipq8074 { __le16 info0; __le16 phy_ppdu_id; __le32 info1; __le32 info2; __le32 toeplitz_hash; __le32 flow_id_toeplitz; __le32 info3; __le32 ppdu_start_timestamp; __le32 phy_meta_data; } __packed; struct rx_msdu_start_qcn9074 { __le16 info0; __le16 phy_ppdu_id; __le32 info1; __le32 info2; __le32 toeplitz_hash; __le32 flow_id_toeplitz; __le32 info3; __le32 ppdu_start_timestamp; __le32 phy_meta_data; __le16 vlan_ctag_c1; __le16 vlan_stag_c1; } __packed; struct rx_msdu_start_wcn6855 { __le16 info0; __le16 phy_ppdu_id; __le32 info1; __le32 info2; __le32 toeplitz_hash; __le32 flow_id_toeplitz; __le32 info3; __le32 ppdu_start_timestamp; __le32 phy_meta_data; __le16 vlan_ctag_ci; __le16 vlan_stag_ci; } __packed; /* rx_msdu_start * * rxpcu_mpdu_filter_in_category * Field indicates what the reason was that this mpdu frame * was allowed to come into the receive path by rxpcu. Values * are defined in enum %RX_DESC_RXPCU_FILTER_*. * * sw_frame_group_id * SW processes frames based on certain classifications. Values * are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*. * * phy_ppdu_id * A ppdu counter value that PHY increments for every PPDU * received. The counter value wraps around. * * msdu_length * MSDU length in bytes after decapsulation. * * ipsec_esp * Set if IPv4/v6 packet is using IPsec ESP. * * l3_offset * Depending upon mode bit, this field either indicates the * L3 offset in bytes from the start of the RX_HEADER or the IP * offset in bytes from the start of the packet after * decapsulation. The latter is only valid if ipv4_proto or * ipv6_proto is set. * * ipsec_ah * Set if IPv4/v6 packet is using IPsec AH * * l4_offset * Depending upon mode bit, this field either indicates the * L4 offset in bytes from the start of RX_HEADER (only valid * if either ipv4_proto or ipv6_proto is set to 1) or indicates * the offset in bytes to the start of TCP or UDP header from * the start of the IP header after decapsulation (Only valid if * tcp_proto or udp_proto is set). The value 0 indicates that * the offset is longer than 127 bytes. * * msdu_number * Indicates the MSDU number within a MPDU. This value is * reset to zero at the start of each MPDU. If the number of * MSDU exceeds 255 this number will wrap using modulo 256. * * decap_type * Indicates the format after decapsulation. Values are defined in * enum %MPDU_START_DECAP_TYPE_*. * * ipv4_proto * Set if L2 layer indicates IPv4 protocol. * * ipv6_proto * Set if L2 layer indicates IPv6 protocol. * * tcp_proto * Set if the ipv4_proto or ipv6_proto are set and the IP protocol * indicates TCP. * * udp_proto * Set if the ipv4_proto or ipv6_proto are set and the IP protocol * indicates UDP. * * ip_frag * Indicates that either the IP More frag bit is set or IP frag * number is non-zero. If set indicates that this is a fragmented * IP packet. * * tcp_only_ack * Set if only the TCP Ack bit is set in the TCP flags and if * the TCP payload is 0. * * da_is_bcast_mcast * The destination address is broadcast or multicast. * * toeplitz_hash * Actual chosen Hash. * 0 - Toeplitz hash of 2-tuple (IP source address, IP * destination address) * 1 - Toeplitz hash of 4-tuple (IP source address, * IP destination address, L4 (TCP/UDP) source port, * L4 (TCP/UDP) destination port) * 2 - Toeplitz of flow_id * 3 - Zero is used * * ip_fixed_header_valid * Fixed 20-byte IPv4 header or 40-byte IPv6 header parsed * fully within first 256 bytes of the packet * * ip_extn_header_valid * IPv6/IPv6 header, including IPv4 options and * recognizable extension headers parsed fully within first 256 * bytes of the packet * * tcp_udp_header_valid * Fixed 20-byte TCP (excluding TCP options) or 8-byte UDP * header parsed fully within first 256 bytes of the packet * * mesh_control_present * When set, this MSDU includes the 'Mesh Control' field * * ldpc * * ip4_protocol_ip6_next_header * For IPv4, this is the 8 bit protocol field set). For IPv6 this * is the 8 bit next_header field. * * toeplitz_hash_2_or_4 * Controlled by RxOLE register - If register bit set to 0, * Toeplitz hash is computed over 2-tuple IPv4 or IPv6 src/dest * addresses; otherwise, toeplitz hash is computed over 4-tuple * IPv4 or IPv6 src/dest addresses and src/dest ports. * * flow_id_toeplitz * Toeplitz hash of 5-tuple * {IP source address, IP destination address, IP source port, IP * destination port, L4 protocol} in case of non-IPSec. * * In case of IPSec - Toeplitz hash of 4-tuple * {IP source address, IP destination address, SPI, L4 protocol} * * The relevant Toeplitz key registers are provided in RxOLE's * instance of common parser module. These registers are separate * from the Toeplitz keys used by ASE/FSE modules inside RxOLE. * The actual value will be passed on from common parser module * to RxOLE in one of the WHO_* TLVs. * * user_rssi * RSSI for this user * * pkt_type * Values are defined in enum %RX_MSDU_START_PKT_TYPE_*. * * stbc * When set, use STBC transmission rates. * * sgi * Field only valid when pkt type is HT, VHT or HE. Values are * defined in enum %RX_MSDU_START_SGI_*. * * rate_mcs * MCS Rate used. * * receive_bandwidth * Full receive Bandwidth. Values are defined in enum * %RX_MSDU_START_RECV_*. * * reception_type * Indicates what type of reception this is and defined in enum * %RX_MSDU_START_RECEPTION_TYPE_*. * * mimo_ss_bitmap * Field only valid when * Reception_type is RX_MSDU_START_RECEPTION_TYPE_DL_MU_MIMO or * RX_MSDU_START_RECEPTION_TYPE_DL_MU_OFDMA_MIMO. * * Bitmap, with each bit indicating if the related spatial * stream is used for this STA * * LSB related to SS 0 * * 0 - spatial stream not used for this reception * 1 - spatial stream used for this reception * * ppdu_start_timestamp * Timestamp that indicates when the PPDU that contained this MPDU * started on the medium. * * phy_meta_data * SW programmed Meta data provided by the PHY. Can be used for SW * to indicate the channel the device is on. */ #define RX_MSDU_END_INFO0_RXPCU_MPDU_FITLER GENMASK(1, 0) #define RX_MSDU_END_INFO0_SW_FRAME_GRP_ID GENMASK(8, 2) #define RX_MSDU_END_INFO1_KEY_ID GENMASK(7, 0) #define RX_MSDU_END_INFO1_CCE_SUPER_RULE GENMASK(13, 8) #define RX_MSDU_END_INFO1_CCND_TRUNCATE BIT(14) #define RX_MSDU_END_INFO1_CCND_CCE_DIS BIT(15) #define RX_MSDU_END_INFO1_EXT_WAPI_PN GENMASK(31, 16) #define RX_MSDU_END_INFO2_REPORTED_MPDU_LEN GENMASK(13, 0) #define RX_MSDU_END_INFO2_FIRST_MSDU BIT(14) #define RX_MSDU_END_INFO2_FIRST_MSDU_WCN6855 BIT(28) #define RX_MSDU_END_INFO2_LAST_MSDU BIT(15) #define RX_MSDU_END_INFO2_LAST_MSDU_WCN6855 BIT(29) #define RX_MSDU_END_INFO2_SA_IDX_TIMEOUT BIT(16) #define RX_MSDU_END_INFO2_DA_IDX_TIMEOUT BIT(17) #define RX_MSDU_END_INFO2_MSDU_LIMIT_ERR BIT(18) #define RX_MSDU_END_INFO2_FLOW_IDX_TIMEOUT BIT(19) #define RX_MSDU_END_INFO2_FLOW_IDX_INVALID BIT(20) #define RX_MSDU_END_INFO2_WIFI_PARSER_ERR BIT(21) #define RX_MSDU_END_INFO2_AMSDU_PARSET_ERR BIT(22) #define RX_MSDU_END_INFO2_SA_IS_VALID BIT(23) #define RX_MSDU_END_INFO2_DA_IS_VALID BIT(24) #define RX_MSDU_END_INFO2_DA_IS_MCBC BIT(25) #define RX_MSDU_END_INFO2_L3_HDR_PADDING GENMASK(27, 26) #define RX_MSDU_END_INFO3_TCP_FLAG GENMASK(8, 0) #define RX_MSDU_END_INFO3_LRO_ELIGIBLE BIT(9) #define RX_MSDU_END_INFO4_DA_OFFSET GENMASK(5, 0) #define RX_MSDU_END_INFO4_SA_OFFSET GENMASK(11, 6) #define RX_MSDU_END_INFO4_DA_OFFSET_VALID BIT(12) #define RX_MSDU_END_INFO4_SA_OFFSET_VALID BIT(13) #define RX_MSDU_END_INFO4_L3_TYPE GENMASK(31, 16) #define RX_MSDU_END_INFO5_MSDU_DROP BIT(0) #define RX_MSDU_END_INFO5_REO_DEST_IND GENMASK(5, 1) #define RX_MSDU_END_INFO5_FLOW_IDX GENMASK(25, 6) struct rx_msdu_end_ipq8074 { __le16 info0; __le16 phy_ppdu_id; __le16 ip_hdr_cksum; __le16 tcp_udp_cksum; __le32 info1; __le32 ext_wapi_pn[2]; __le32 info2; __le32 ipv6_options_crc; __le32 tcp_seq_num; __le32 tcp_ack_num; __le16 info3; __le16 window_size; __le32 info4; __le32 rule_indication[2]; __le16 sa_idx; __le16 da_idx; __le32 info5; __le32 fse_metadata; __le16 cce_metadata; __le16 sa_sw_peer_id; } __packed; struct rx_msdu_end_wcn6855 { __le16 info0; __le16 phy_ppdu_id; __le16 ip_hdr_cksum; __le16 reported_mpdu_len; __le32 info1; __le32 ext_wapi_pn[2]; __le32 info4; __le32 ipv6_options_crc; __le32 tcp_seq_num; __le32 tcp_ack_num; __le16 info3; __le16 window_size; __le32 info2; __le16 sa_idx; __le16 da_idx; __le32 info5; __le32 fse_metadata; __le16 cce_metadata; __le16 sa_sw_peer_id; __le32 rule_indication[2]; __le32 info6; __le32 info7; } __packed; #define RX_MSDU_END_MPDU_LENGTH_INFO GENMASK(13, 0) #define RX_MSDU_END_INFO2_DA_OFFSET GENMASK(5, 0) #define RX_MSDU_END_INFO2_SA_OFFSET GENMASK(11, 6) #define RX_MSDU_END_INFO2_DA_OFFSET_VALID BIT(12) #define RX_MSDU_END_INFO2_SA_OFFSET_VALID BIT(13) #define RX_MSDU_END_INFO2_L3_TYPE GENMASK(31, 16) #define RX_MSDU_END_INFO4_SA_IDX_TIMEOUT BIT(0) #define RX_MSDU_END_INFO4_DA_IDX_TIMEOUT BIT(1) #define RX_MSDU_END_INFO4_MSDU_LIMIT_ERR BIT(2) #define RX_MSDU_END_INFO4_FLOW_IDX_TIMEOUT BIT(3) #define RX_MSDU_END_INFO4_FLOW_IDX_INVALID BIT(4) #define RX_MSDU_END_INFO4_WIFI_PARSER_ERR BIT(5) #define RX_MSDU_END_INFO4_AMSDU_PARSER_ERR BIT(6) #define RX_MSDU_END_INFO4_SA_IS_VALID BIT(7) #define RX_MSDU_END_INFO4_DA_IS_VALID BIT(8) #define RX_MSDU_END_INFO4_DA_IS_MCBC BIT(9) #define RX_MSDU_END_INFO4_L3_HDR_PADDING GENMASK(11, 10) #define RX_MSDU_END_INFO4_FIRST_MSDU BIT(12) #define RX_MSDU_END_INFO4_LAST_MSDU BIT(13) #define RX_MSDU_END_INFO6_AGGR_COUNT GENMASK(7, 0) #define RX_MSDU_END_INFO6_FLOW_AGGR_CONTN BIT(8) #define RX_MSDU_END_INFO6_FISA_TIMEOUT BIT(9) struct rx_msdu_end_qcn9074 { __le16 info0; __le16 phy_ppdu_id; __le16 ip_hdr_cksum; __le16 mpdu_length_info; __le32 info1; __le32 rule_indication[2]; __le32 info2; __le32 ipv6_options_crc; __le32 tcp_seq_num; __le32 tcp_ack_num; __le16 info3; __le16 window_size; __le16 tcp_udp_cksum; __le16 info4; __le16 sa_idx; __le16 da_idx; __le32 info5; __le32 fse_metadata; __le16 cce_metadata; __le16 sa_sw_peer_id; __le32 info6; __le16 cum_l4_cksum; __le16 cum_ip_length; } __packed; /* rx_msdu_end * * rxpcu_mpdu_filter_in_category * Field indicates what the reason was that this mpdu frame * was allowed to come into the receive path by rxpcu. Values * are defined in enum %RX_DESC_RXPCU_FILTER_*. * * sw_frame_group_id * SW processes frames based on certain classifications. Values * are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*. * * phy_ppdu_id * A ppdu counter value that PHY increments for every PPDU * received. The counter value wraps around. * * ip_hdr_cksum * This can include the IP header checksum or the pseudo * header checksum used by TCP/UDP checksum. * * tcp_udp_chksum * The value of the computed TCP/UDP checksum. A mode bit * selects whether this checksum is the full checksum or the * partial checksum which does not include the pseudo header. * * key_id * The key ID octet from the IV. Only valid when first_msdu is set. * * cce_super_rule * Indicates the super filter rule. * * cce_classify_not_done_truncate * Classification failed due to truncated frame. * * cce_classify_not_done_cce_dis * Classification failed due to CCE global disable * * ext_wapi_pn* * Extension PN (packet number) which is only used by WAPI. * * reported_mpdu_length * MPDU length before decapsulation. Only valid when first_msdu is * set. This field is taken directly from the length field of the * A-MPDU delimiter or the preamble length field for non-A-MPDU * frames. * * first_msdu * Indicates the first MSDU of A-MSDU. If both first_msdu and * last_msdu are set in the MSDU then this is a non-aggregated MSDU * frame: normal MPDU. Interior MSDU in an A-MSDU shall have both * first_mpdu and last_mpdu bits set to 0. * * last_msdu * Indicates the last MSDU of the A-MSDU. MPDU end status is only * valid when last_msdu is set. * * sa_idx_timeout * Indicates an unsuccessful MAC source address search due to the * expiring of the search timer. * * da_idx_timeout * Indicates an unsuccessful MAC destination address search due to * the expiring of the search timer. * * msdu_limit_error * Indicates that the MSDU threshold was exceeded and thus all the * rest of the MSDUs will not be scattered and will not be * decapsulated but will be DMA'ed in RAW format as a single MSDU. * * flow_idx_timeout * Indicates an unsuccessful flow search due to the expiring of * the search timer. * * flow_idx_invalid * flow id is not valid. * * amsdu_parser_error * A-MSDU could not be properly de-agregated. * * sa_is_valid * Indicates that OLE found a valid SA entry. * * da_is_valid * Indicates that OLE found a valid DA entry. * * da_is_mcbc * Field Only valid if da_is_valid is set. Indicates the DA address * was a Multicast of Broadcast address. * * l3_header_padding * Number of bytes padded to make sure that the L3 header will * always start of a Dword boundary. * * ipv6_options_crc * 32 bit CRC computed out of IP v6 extension headers. * * tcp_seq_number * TCP sequence number. * * tcp_ack_number * TCP acknowledge number. * * tcp_flag * TCP flags {NS, CWR, ECE, URG, ACK, PSH, RST, SYN, FIN}. * * lro_eligible * Computed out of TCP and IP fields to indicate that this * MSDU is eligible for LRO. * * window_size * TCP receive window size. * * da_offset * Offset into MSDU buffer for DA. * * sa_offset * Offset into MSDU buffer for SA. * * da_offset_valid * da_offset field is valid. This will be set to 0 in case * of a dynamic A-MSDU when DA is compressed. * * sa_offset_valid * sa_offset field is valid. This will be set to 0 in case * of a dynamic A-MSDU when SA is compressed. * * l3_type * The 16-bit type value indicating the type of L3 later * extracted from LLC/SNAP, set to zero if SNAP is not * available. * * rule_indication * Bitmap indicating which of rules have matched. * * sa_idx * The offset in the address table which matches MAC source address * * da_idx * The offset in the address table which matches MAC destination * address. * * msdu_drop * REO shall drop this MSDU and not forward it to any other ring. * * reo_destination_indication * The id of the reo exit ring where the msdu frame shall push * after (MPDU level) reordering has finished. Values are defined * in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_. * * flow_idx * Flow table index. * * fse_metadata * FSE related meta data. * * cce_metadata * CCE related meta data. * * sa_sw_peer_id * sw_peer_id from the address search entry corresponding to the * source address of the MSDU. */ enum rx_mpdu_end_rxdma_dest_ring { RX_MPDU_END_RXDMA_DEST_RING_RELEASE, RX_MPDU_END_RXDMA_DEST_RING_FW, RX_MPDU_END_RXDMA_DEST_RING_SW, RX_MPDU_END_RXDMA_DEST_RING_REO, }; #define RX_MPDU_END_INFO1_UNSUP_KTYPE_SHORT_FRAME BIT(11) #define RX_MPDU_END_INFO1_RX_IN_TX_DECRYPT_BYT BIT(12) #define RX_MPDU_END_INFO1_OVERFLOW_ERR BIT(13) #define RX_MPDU_END_INFO1_MPDU_LEN_ERR BIT(14) #define RX_MPDU_END_INFO1_TKIP_MIC_ERR BIT(15) #define RX_MPDU_END_INFO1_DECRYPT_ERR BIT(16) #define RX_MPDU_END_INFO1_UNENCRYPTED_FRAME_ERR BIT(17) #define RX_MPDU_END_INFO1_PN_FIELDS_VALID BIT(18) #define RX_MPDU_END_INFO1_FCS_ERR BIT(19) #define RX_MPDU_END_INFO1_MSDU_LEN_ERR BIT(20) #define RX_MPDU_END_INFO1_RXDMA0_DEST_RING GENMASK(22, 21) #define RX_MPDU_END_INFO1_RXDMA1_DEST_RING GENMASK(24, 23) #define RX_MPDU_END_INFO1_DECRYPT_STATUS_CODE GENMASK(27, 25) #define RX_MPDU_END_INFO1_RX_BITMAP_NOT_UPD BIT(28) struct rx_mpdu_end { __le16 info0; __le16 phy_ppdu_id; __le32 info1; } __packed; /* rx_mpdu_end * * rxpcu_mpdu_filter_in_category * Field indicates what the reason was that this mpdu frame * was allowed to come into the receive path by rxpcu. Values * are defined in enum %RX_DESC_RXPCU_FILTER_*. * * sw_frame_group_id * SW processes frames based on certain classifications. Values * are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*. * * phy_ppdu_id * A ppdu counter value that PHY increments for every PPDU * received. The counter value wraps around. * * unsup_ktype_short_frame * This bit will be '1' when WEP or TKIP or WAPI key type is * received for 11ah short frame. Crypto will bypass the received * packet without decryption to RxOLE after setting this bit. * * rx_in_tx_decrypt_byp * Indicates that RX packet is not decrypted as Crypto is * busy with TX packet processing. * * overflow_err * RXPCU Receive FIFO ran out of space to receive the full MPDU. * Therefore this MPDU is terminated early and is thus corrupted. * * This MPDU will not be ACKed. * * RXPCU might still be able to correctly receive the following * MPDUs in the PPDU if enough fifo space became available in time. * * mpdu_length_err * Set by RXPCU if the expected MPDU length does not correspond * with the actually received number of bytes in the MPDU. * * tkip_mic_err * Set by Rx crypto when crypto detected a TKIP MIC error for * this MPDU. * * decrypt_err * Set by RX CRYPTO when CRYPTO detected a decrypt error for this * MPDU or CRYPTO received an encrypted frame, but did not get a * valid corresponding key id in the peer entry. * * unencrypted_frame_err * Set by RX CRYPTO when CRYPTO detected an unencrypted frame while * in the peer entry field 'All_frames_shall_be_encrypted' is set. * * pn_fields_contain_valid_info * Set by RX CRYPTO to indicate that there is a valid PN field * present in this MPDU. * * fcs_err * Set by RXPCU when there is an FCS error detected for this MPDU. * * msdu_length_err * Set by RXOLE when there is an msdu length error detected * in at least 1 of the MSDUs embedded within the MPDU. * * rxdma0_destination_ring * rxdma1_destination_ring * The ring to which RXDMA0/1 shall push the frame, assuming * no MPDU level errors are detected. In case of MPDU level * errors, RXDMA0/1 might change the RXDMA0/1 destination. Values * are defined in %enum RX_MPDU_END_RXDMA_DEST_RING_*. * * decrypt_status_code * Field provides insight into the decryption performed. Values * are defined in enum %RX_DESC_DECRYPT_STATUS_CODE_*. * * rx_bitmap_not_updated * Frame is received, but RXPCU could not update the receive bitmap * due to (temporary) fifo constraints. */ /* Padding bytes to avoid TLV's spanning across 128 byte boundary */ #define HAL_RX_DESC_PADDING0_BYTES 4 #define HAL_RX_DESC_PADDING1_BYTES 16 #define HAL_RX_DESC_HDR_STATUS_LEN 120 struct hal_rx_desc_ipq8074 { __le32 msdu_end_tag; struct rx_msdu_end_ipq8074 msdu_end; __le32 rx_attn_tag; struct rx_attention attention; __le32 msdu_start_tag; struct rx_msdu_start_ipq8074 msdu_start; u8 rx_padding0[HAL_RX_DESC_PADDING0_BYTES]; __le32 mpdu_start_tag; struct rx_mpdu_start_ipq8074 mpdu_start; __le32 mpdu_end_tag; struct rx_mpdu_end mpdu_end; u8 rx_padding1[HAL_RX_DESC_PADDING1_BYTES]; __le32 hdr_status_tag; __le32 phy_ppdu_id; u8 hdr_status[HAL_RX_DESC_HDR_STATUS_LEN]; u8 msdu_payload[]; } __packed; struct hal_rx_desc_qcn9074 { __le32 msdu_end_tag; struct rx_msdu_end_qcn9074 msdu_end; __le32 rx_attn_tag; struct rx_attention attention; __le32 msdu_start_tag; struct rx_msdu_start_qcn9074 msdu_start; u8 rx_padding0[HAL_RX_DESC_PADDING0_BYTES]; __le32 mpdu_start_tag; struct rx_mpdu_start_qcn9074 mpdu_start; __le32 mpdu_end_tag; struct rx_mpdu_end mpdu_end; u8 rx_padding1[HAL_RX_DESC_PADDING1_BYTES]; __le32 hdr_status_tag; __le32 phy_ppdu_id; u8 hdr_status[HAL_RX_DESC_HDR_STATUS_LEN]; u8 msdu_payload[]; } __packed; struct hal_rx_desc_wcn6855 { __le32 msdu_end_tag; struct rx_msdu_end_wcn6855 msdu_end; __le32 rx_attn_tag; struct rx_attention attention; __le32 msdu_start_tag; struct rx_msdu_start_wcn6855 msdu_start; u8 rx_padding0[HAL_RX_DESC_PADDING0_BYTES]; __le32 mpdu_start_tag; struct rx_mpdu_start_wcn6855 mpdu_start; __le32 mpdu_end_tag; struct rx_mpdu_end mpdu_end; u8 rx_padding1[HAL_RX_DESC_PADDING1_BYTES]; __le32 hdr_status_tag; __le32 phy_ppdu_id; u8 hdr_status[HAL_RX_DESC_HDR_STATUS_LEN]; u8 msdu_payload[]; } __packed; struct hal_rx_desc { union { struct hal_rx_desc_ipq8074 ipq8074; struct hal_rx_desc_qcn9074 qcn9074; struct hal_rx_desc_wcn6855 wcn6855; } u; } __packed; #define HAL_RX_RU_ALLOC_TYPE_MAX 6 #define RU_26 1 #define RU_52 2 #define RU_106 4 #define RU_242 9 #define RU_484 18 #define RU_996 37 #endif /* ATH11K_RX_DESC_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1