Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Janusz Dziedzic | 502 | 100.00% | 1 | 100.00% |
Total | 502 | 1 |
/* SPDX-License-Identifier: BSD-3-Clause-Clear */ /* * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved. * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved. */ #ifndef ATH12K_CE_H #define ATH12K_CE_H #define CE_COUNT_MAX 16 /* Byte swap data words */ #define CE_ATTR_BYTE_SWAP_DATA 2 /* no interrupt on copy completion */ #define CE_ATTR_DIS_INTR 8 /* Host software's Copy Engine configuration. */ #define CE_ATTR_FLAGS 0 /* Threshold to poll for tx completion in case of Interrupt disabled CE's */ #define ATH12K_CE_USAGE_THRESHOLD 32 /* Directions for interconnect pipe configuration. * These definitions may be used during configuration and are shared * between Host and Target. * * Pipe Directions are relative to the Host, so PIPEDIR_IN means * "coming IN over air through Target to Host" as with a WiFi Rx operation. * Conversely, PIPEDIR_OUT means "going OUT from Host through Target over air" * as with a WiFi Tx operation. This is somewhat awkward for the "middle-man" * Target since things that are "PIPEDIR_OUT" are coming IN to the Target * over the interconnect. */ #define PIPEDIR_NONE 0 #define PIPEDIR_IN 1 /* Target-->Host, WiFi Rx direction */ #define PIPEDIR_OUT 2 /* Host->Target, WiFi Tx direction */ #define PIPEDIR_INOUT 3 /* bidirectional */ #define PIPEDIR_INOUT_H2H 4 /* bidirectional, host to host */ /* CE address/mask */ #define CE_HOST_IE_ADDRESS 0x00A1803C #define CE_HOST_IE_2_ADDRESS 0x00A18040 #define CE_HOST_IE_3_ADDRESS CE_HOST_IE_ADDRESS #define CE_HOST_IE_3_SHIFT 0xC #define CE_RING_IDX_INCR(nentries_mask, idx) (((idx) + 1) & (nentries_mask)) #define ATH12K_CE_RX_POST_RETRY_JIFFIES 50 struct ath12k_base; /* Establish a mapping between a service/direction and a pipe. * Configuration information for a Copy Engine pipe and services. * Passed from Host to Target through QMI message and must be in * little endian format. */ struct service_to_pipe { __le32 service_id; __le32 pipedir; __le32 pipenum; }; /* Configuration information for a Copy Engine pipe. * Passed from Host to Target through QMI message during startup (one per CE). * * NOTE: Structure is shared between Host software and Target firmware! */ struct ce_pipe_config { __le32 pipenum; __le32 pipedir; __le32 nentries; __le32 nbytes_max; __le32 flags; __le32 reserved; }; struct ce_attr { /* CE_ATTR_* values */ unsigned int flags; /* #entries in source ring - Must be a power of 2 */ unsigned int src_nentries; /* Max source send size for this CE. * This is also the minimum size of a destination buffer. */ unsigned int src_sz_max; /* #entries in destination ring - Must be a power of 2 */ unsigned int dest_nentries; void (*recv_cb)(struct ath12k_base *ab, struct sk_buff *skb); }; #define CE_DESC_RING_ALIGN 8 struct ath12k_ce_ring { /* Number of entries in this ring; must be power of 2 */ unsigned int nentries; unsigned int nentries_mask; /* For dest ring, this is the next index to be processed * by software after it was/is received into. * * For src ring, this is the last descriptor that was sent * and completion processed by software. * * Regardless of src or dest ring, this is an invariant * (modulo ring size): * write index >= read index >= sw_index */ unsigned int sw_index; /* cached copy */ unsigned int write_index; /* Start of DMA-coherent area reserved for descriptors */ /* Host address space */ void *base_addr_owner_space_unaligned; /* CE address space */ u32 base_addr_ce_space_unaligned; /* Actual start of descriptors. * Aligned to descriptor-size boundary. * Points into reserved DMA-coherent area, above. */ /* Host address space */ void *base_addr_owner_space; /* CE address space */ u32 base_addr_ce_space; /* HAL ring id */ u32 hal_ring_id; /* keep last */ struct sk_buff *skb[]; }; struct ath12k_ce_pipe { struct ath12k_base *ab; u16 pipe_num; unsigned int attr_flags; unsigned int buf_sz; unsigned int rx_buf_needed; void (*send_cb)(struct ath12k_ce_pipe *pipe); void (*recv_cb)(struct ath12k_base *ab, struct sk_buff *skb); struct tasklet_struct intr_tq; struct ath12k_ce_ring *src_ring; struct ath12k_ce_ring *dest_ring; struct ath12k_ce_ring *status_ring; u64 timestamp; }; struct ath12k_ce { struct ath12k_ce_pipe ce_pipe[CE_COUNT_MAX]; /* Protects rings of all ce pipes */ spinlock_t ce_lock; struct ath12k_hp_update_timer hp_timer[CE_COUNT_MAX]; }; extern const struct ce_attr ath12k_host_ce_config_qcn9274[]; extern const struct ce_attr ath12k_host_ce_config_wcn7850[]; void ath12k_ce_cleanup_pipes(struct ath12k_base *ab); void ath12k_ce_rx_replenish_retry(struct timer_list *t); void ath12k_ce_per_engine_service(struct ath12k_base *ab, u16 ce_id); int ath12k_ce_send(struct ath12k_base *ab, struct sk_buff *skb, u8 pipe_id, u16 transfer_id); void ath12k_ce_rx_post_buf(struct ath12k_base *ab); int ath12k_ce_init_pipes(struct ath12k_base *ab); int ath12k_ce_alloc_pipes(struct ath12k_base *ab); void ath12k_ce_free_pipes(struct ath12k_base *ab); int ath12k_ce_get_attr_flags(struct ath12k_base *ab, int ce_id); void ath12k_ce_poll_send_completed(struct ath12k_base *ab, u8 pipe_id); int ath12k_ce_map_service_to_pipe(struct ath12k_base *ab, u16 service_id, u8 *ul_pipe, u8 *dl_pipe); int ath12k_ce_attr_attach(struct ath12k_base *ab); void ath12k_ce_get_shadow_config(struct ath12k_base *ab, u32 **shadow_cfg, u32 *shadow_cfg_len); #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1