| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Michael Wu | 783 | 52.98% | 2 | 14.29% |
| Andrea Merello | 548 | 37.08% | 3 | 21.43% |
| Hin-Tak Leung | 71 | 4.80% | 1 | 7.14% |
| Herton Ronaldo Krzesinski | 53 | 3.59% | 2 | 14.29% |
| John W. Linville | 13 | 0.88% | 1 | 7.14% |
| Johannes Berg | 4 | 0.27% | 1 | 7.14% |
| Thomas Gleixner | 2 | 0.14% | 1 | 7.14% |
| Larry Finger | 2 | 0.14% | 1 | 7.14% |
| Eric Dumazet | 1 | 0.07% | 1 | 7.14% |
| Michael Buesch | 1 | 0.07% | 1 | 7.14% |
| Total | 1478 | 14 |
/* SPDX-License-Identifier: GPL-2.0-only */ /* * Definitions for RTL818x hardware * * Copyright 2007 Michael Wu <flamingice@sourmilk.net> * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> * * Based on the r8187 driver, which is: * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al. */ #ifndef RTL818X_H #define RTL818X_H struct rtl818x_csr { u8 MAC[6]; u8 reserved_0[2]; union { __le32 MAR[2]; /* 0x8 */ struct{ /* rtl8187se */ u8 rf_sw_config; /* 0x8 */ u8 reserved_01[3]; __le32 TMGDA; /* 0xc */ } __packed; } __packed; union { /* 0x10 */ struct { u8 RX_FIFO_COUNT; u8 reserved_1; u8 TX_FIFO_COUNT; u8 BQREQ; } __packed; __le32 TBKDA; /* for 8187se */ } __packed; __le32 TBEDA; /* 0x14 - for rtl8187se */ __le32 TSFT[2]; union { /* 0x20 */ __le32 TLPDA; __le32 TVIDA; /* for 8187se */ } __packed; union { /* 0x24 */ __le32 TNPDA; __le32 TVODA; /* for 8187se */ } __packed; /* hi pri ring for all cards */ __le32 THPDA; /* 0x28 */ union { /* 0x2c */ struct { u8 reserved_2a; u8 EIFS_8187SE; } __packed; __le16 BRSR; } __packed; u8 BSSID[6]; /* 0x2e */ union { /* 0x34 */ struct { u8 RESP_RATE; u8 EIFS; } __packed; __le16 BRSR_8187SE; } __packed; u8 reserved_3[1]; /* 0x36 */ u8 CMD; /* 0x37 */ #define RTL818X_CMD_TX_ENABLE (1 << 2) #define RTL818X_CMD_RX_ENABLE (1 << 3) #define RTL818X_CMD_RESET (1 << 4) u8 reserved_4[4]; /* 0x38 */ union { struct { __le16 INT_MASK; __le16 INT_STATUS; } __packed; __le32 INT_STATUS_SE; /* 0x3c */ } __packed; /* status bits for rtl8187 and rtl8180/8185 */ #define RTL818X_INT_RX_OK (1 << 0) #define RTL818X_INT_RX_ERR (1 << 1) #define RTL818X_INT_TXL_OK (1 << 2) #define RTL818X_INT_TXL_ERR (1 << 3) #define RTL818X_INT_RX_DU (1 << 4) #define RTL818X_INT_RX_FO (1 << 5) #define RTL818X_INT_TXN_OK (1 << 6) #define RTL818X_INT_TXN_ERR (1 << 7) #define RTL818X_INT_TXH_OK (1 << 8) #define RTL818X_INT_TXH_ERR (1 << 9) #define RTL818X_INT_TXB_OK (1 << 10) #define RTL818X_INT_TXB_ERR (1 << 11) #define RTL818X_INT_ATIM (1 << 12) #define RTL818X_INT_BEACON (1 << 13) #define RTL818X_INT_TIME_OUT (1 << 14) #define RTL818X_INT_TX_FO (1 << 15) /* status bits for rtl8187se */ #define RTL818X_INT_SE_TIMER3 (1 << 0) #define RTL818X_INT_SE_TIMER2 (1 << 1) #define RTL818X_INT_SE_RQ0SOR (1 << 2) #define RTL818X_INT_SE_TXBED_OK (1 << 3) #define RTL818X_INT_SE_TXBED_ERR (1 << 4) #define RTL818X_INT_SE_TXBE_OK (1 << 5) #define RTL818X_INT_SE_TXBE_ERR (1 << 6) #define RTL818X_INT_SE_RX_OK (1 << 7) #define RTL818X_INT_SE_RX_ERR (1 << 8) #define RTL818X_INT_SE_TXL_OK (1 << 9) #define RTL818X_INT_SE_TXL_ERR (1 << 10) #define RTL818X_INT_SE_RX_DU (1 << 11) #define RTL818X_INT_SE_RX_FIFO (1 << 12) #define RTL818X_INT_SE_TXN_OK (1 << 13) #define RTL818X_INT_SE_TXN_ERR (1 << 14) #define RTL818X_INT_SE_TXH_OK (1 << 15) #define RTL818X_INT_SE_TXH_ERR (1 << 16) #define RTL818X_INT_SE_TXB_OK (1 << 17) #define RTL818X_INT_SE_TXB_ERR (1 << 18) #define RTL818X_INT_SE_ATIM_TO (1 << 19) #define RTL818X_INT_SE_BK_TO (1 << 20) #define RTL818X_INT_SE_TIMER1 (1 << 21) #define RTL818X_INT_SE_TX_FIFO (1 << 22) #define RTL818X_INT_SE_WAKEUP (1 << 23) #define RTL818X_INT_SE_BK_DMA (1 << 24) #define RTL818X_INT_SE_TMGD_OK (1 << 30) __le32 TX_CONF; /* 0x40 */ #define RTL818X_TX_CONF_LOOPBACK_MAC (1 << 17) #define RTL818X_TX_CONF_LOOPBACK_CONT (3 << 17) #define RTL818X_TX_CONF_NO_ICV (1 << 19) #define RTL818X_TX_CONF_DISCW (1 << 20) #define RTL818X_TX_CONF_SAT_HWPLCP (1 << 24) #define RTL818X_TX_CONF_R8180_ABCD (2 << 25) #define RTL818X_TX_CONF_R8180_F (3 << 25) #define RTL818X_TX_CONF_R8185_ABC (4 << 25) #define RTL818X_TX_CONF_R8185_D (5 << 25) #define RTL818X_TX_CONF_R8187vD (5 << 25) #define RTL818X_TX_CONF_R8187vD_B (6 << 25) #define RTL818X_TX_CONF_RTL8187SE (6 << 25) #define RTL818X_TX_CONF_HWVER_MASK (7 << 25) #define RTL818X_TX_CONF_DISREQQSIZE (1 << 28) #define RTL818X_TX_CONF_PROBE_DTS (1 << 29) #define RTL818X_TX_CONF_HW_SEQNUM (1 << 30) #define RTL818X_TX_CONF_CW_MIN (1 << 31) __le32 RX_CONF; #define RTL818X_RX_CONF_MONITOR (1 << 0) #define RTL818X_RX_CONF_NICMAC (1 << 1) #define RTL818X_RX_CONF_MULTICAST (1 << 2) #define RTL818X_RX_CONF_BROADCAST (1 << 3) #define RTL818X_RX_CONF_FCS (1 << 5) #define RTL818X_RX_CONF_DATA (1 << 18) #define RTL818X_RX_CONF_CTRL (1 << 19) #define RTL818X_RX_CONF_MGMT (1 << 20) #define RTL818X_RX_CONF_ADDR3 (1 << 21) #define RTL818X_RX_CONF_PM (1 << 22) #define RTL818X_RX_CONF_BSSID (1 << 23) #define RTL818X_RX_CONF_RX_AUTORESETPHY (1 << 28) #define RTL818X_RX_CONF_CSDM1 (1 << 29) #define RTL818X_RX_CONF_CSDM2 (1 << 30) #define RTL818X_RX_CONF_ONLYERLPKT (1 << 31) __le32 INT_TIMEOUT; __le32 TBDA; u8 EEPROM_CMD; #define RTL818X_EEPROM_CMD_READ (1 << 0) #define RTL818X_EEPROM_CMD_WRITE (1 << 1) #define RTL818X_EEPROM_CMD_CK (1 << 2) #define RTL818X_EEPROM_CMD_CS (1 << 3) #define RTL818X_EEPROM_CMD_NORMAL (0 << 6) #define RTL818X_EEPROM_CMD_LOAD (1 << 6) #define RTL818X_EEPROM_CMD_PROGRAM (2 << 6) #define RTL818X_EEPROM_CMD_CONFIG (3 << 6) u8 CONFIG0; u8 CONFIG1; u8 CONFIG2; #define RTL818X_CONFIG2_ANTENNA_DIV (1 << 6) __le32 ANAPARAM; u8 MSR; #define RTL818X_MSR_NO_LINK (0 << 2) #define RTL818X_MSR_ADHOC (1 << 2) #define RTL818X_MSR_INFRA (2 << 2) #define RTL818X_MSR_MASTER (3 << 2) #define RTL818X_MSR_ENEDCA (4 << 2) u8 CONFIG3; #define RTL818X_CONFIG3_ANAPARAM_WRITE (1 << 6) #define RTL818X_CONFIG3_GNT_SELECT (1 << 7) u8 CONFIG4; #define RTL818X_CONFIG4_POWEROFF (1 << 6) #define RTL818X_CONFIG4_VCOOFF (1 << 7) u8 TESTR; u8 reserved_9[2]; u8 PGSELECT; u8 SECURITY; __le32 ANAPARAM2; u8 reserved_10[8]; __le32 IMR; /* 0x6c - Interrupt mask reg for 8187se */ #define IMR_TMGDOK ((1 << 30)) #define IMR_DOT11HINT ((1 << 25)) /* 802.11h Measurement Interrupt */ #define IMR_BCNDMAINT ((1 << 24)) /* Beacon DMA Interrupt */ #define IMR_WAKEINT ((1 << 23)) /* Wake Up Interrupt */ #define IMR_TXFOVW ((1 << 22)) /* Tx FIFO Overflow */ #define IMR_TIMEOUT1 ((1 << 21)) /* Time Out Interrupt 1 */ #define IMR_BCNINT ((1 << 20)) /* Beacon Time out */ #define IMR_ATIMINT ((1 << 19)) /* ATIM Time Out */ #define IMR_TBDER ((1 << 18)) /* Tx Beacon Descriptor Error */ #define IMR_TBDOK ((1 << 17)) /* Tx Beacon Descriptor OK */ #define IMR_THPDER ((1 << 16)) /* Tx High Priority Descriptor Error */ #define IMR_THPDOK ((1 << 15)) /* Tx High Priority Descriptor OK */ #define IMR_TVODER ((1 << 14)) /* Tx AC_VO Descriptor Error Int */ #define IMR_TVODOK ((1 << 13)) /* Tx AC_VO Descriptor OK Interrupt */ #define IMR_FOVW ((1 << 12)) /* Rx FIFO Overflow Interrupt */ #define IMR_RDU ((1 << 11)) /* Rx Descriptor Unavailable */ #define IMR_TVIDER ((1 << 10)) /* Tx AC_VI Descriptor Error */ #define IMR_TVIDOK ((1 << 9)) /* Tx AC_VI Descriptor OK Interrupt */ #define IMR_RER ((1 << 8)) /* Rx Error Interrupt */ #define IMR_ROK ((1 << 7)) /* Receive OK Interrupt */ #define IMR_TBEDER ((1 << 6)) /* Tx AC_BE Descriptor Error */ #define IMR_TBEDOK ((1 << 5)) /* Tx AC_BE Descriptor OK */ #define IMR_TBKDER ((1 << 4)) /* Tx AC_BK Descriptor Error */ #define IMR_TBKDOK ((1 << 3)) /* Tx AC_BK Descriptor OK */ #define IMR_RQOSOK ((1 << 2)) /* Rx QoS OK Interrupt */ #define IMR_TIMEOUT2 ((1 << 1)) /* Time Out Interrupt 2 */ #define IMR_TIMEOUT3 ((1 << 0)) /* Time Out Interrupt 3 */ __le16 BEACON_INTERVAL; /* 0x70 */ __le16 ATIM_WND; /* 0x72 */ __le16 BEACON_INTERVAL_TIME; /* 0x74 */ __le16 ATIMTR_INTERVAL; /* 0x76 */ u8 PHY_DELAY; /* 0x78 */ u8 CARRIER_SENSE_COUNTER; /* 0x79 */ u8 reserved_11[2]; /* 0x7a */ u8 PHY[4]; /* 0x7c */ __le16 RFPinsOutput; /* 0x80 */ __le16 RFPinsEnable; /* 0x82 */ __le16 RFPinsSelect; /* 0x84 */ __le16 RFPinsInput; /* 0x86 */ __le32 RF_PARA; /* 0x88 */ __le32 RF_TIMING; /* 0x8c */ u8 GP_ENABLE; /* 0x90 */ u8 GPIO0; /* 0x91 */ u8 GPIO1; /* 0x92 */ u8 TPPOLL_STOP; /* 0x93 - rtl8187se only */ #define RTL818x_TPPOLL_STOP_BQ (1 << 7) #define RTL818x_TPPOLL_STOP_VI (1 << 4) #define RTL818x_TPPOLL_STOP_VO (1 << 5) #define RTL818x_TPPOLL_STOP_BE (1 << 3) #define RTL818x_TPPOLL_STOP_BK (1 << 2) #define RTL818x_TPPOLL_STOP_MG (1 << 1) #define RTL818x_TPPOLL_STOP_HI (1 << 6) __le32 HSSI_PARA; /* 0x94 */ u8 reserved_13[4]; /* 0x98 */ u8 TX_AGC_CTL; /* 0x9c */ #define RTL818X_TX_AGC_CTL_PERPACKET_GAIN (1 << 0) #define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL (1 << 1) #define RTL818X_TX_AGC_CTL_FEEDBACK_ANT (1 << 2) u8 TX_GAIN_CCK; u8 TX_GAIN_OFDM; u8 TX_ANTENNA; u8 reserved_14[16]; u8 WPA_CONF; u8 reserved_15[3]; u8 SIFS; u8 DIFS; u8 SLOT; u8 reserved_16[5]; u8 CW_CONF; #define RTL818X_CW_CONF_PERPACKET_CW (1 << 0) #define RTL818X_CW_CONF_PERPACKET_RETRY (1 << 1) u8 CW_VAL; u8 RATE_FALLBACK; #define RTL818X_RATE_FALLBACK_ENABLE (1 << 7) u8 ACM_CONTROL; u8 reserved_17[24]; u8 CONFIG5; u8 TX_DMA_POLLING; u8 PHY_PR; u8 reserved_18; __le16 CWR; u8 RETRY_CTR; u8 reserved_19[3]; __le16 INT_MIG; /* RTL818X_R8187B_*: magic numbers from ioregisters */ #define RTL818X_R8187B_B 0 #define RTL818X_R8187B_D 1 #define RTL818X_R8187B_E 2 __le32 RDSAR; __le16 TID_AC_MAP; u8 reserved_20[4]; union { __le16 ANAPARAM3; /* 0xee */ u8 ANAPARAM3A; /* for rtl8187 */ }; #define AC_PARAM_TXOP_LIMIT_SHIFT 16 #define AC_PARAM_ECW_MAX_SHIFT 12 #define AC_PARAM_ECW_MIN_SHIFT 8 #define AC_PARAM_AIFS_SHIFT 0 __le32 AC_VO_PARAM; /* 0xf0 */ union { /* 0xf4 */ __le32 AC_VI_PARAM; __le16 FEMR; } __packed; union{ /* 0xf8 */ __le32 AC_BE_PARAM; /* rtl8187se */ struct{ u8 reserved_21[2]; __le16 TALLY_CNT; /* 0xfa */ } __packed; } __packed; union { u8 TALLY_SEL; /* 0xfc */ __le32 AC_BK_PARAM; } __packed; } __packed; /* These are addresses with NON-standard usage. * They have offsets very far from this struct. * I don't like to introduce a ton of "reserved".. * They are for RTL8187SE */ #define REG_ADDR1(addr) ((u8 __iomem *)priv->map + (addr)) #define REG_ADDR2(addr) ((__le16 __iomem *)priv->map + ((addr) >> 1)) #define REG_ADDR4(addr) ((__le32 __iomem *)priv->map + ((addr) >> 2)) #define FEMR_SE REG_ADDR2(0x1D4) #define ARFR REG_ADDR2(0x1E0) #define RFSW_CTRL REG_ADDR2(0x272) #define SW_3W_DB0 REG_ADDR2(0x274) #define SW_3W_DB0_4 REG_ADDR4(0x274) #define SW_3W_DB1 REG_ADDR2(0x278) #define SW_3W_DB1_4 REG_ADDR4(0x278) #define SW_3W_CMD1 REG_ADDR1(0x27D) #define PI_DATA_REG REG_ADDR2(0x360) #define SI_DATA_REG REG_ADDR2(0x362) struct rtl818x_rf_ops { char *name; void (*init)(struct ieee80211_hw *); void (*stop)(struct ieee80211_hw *); void (*set_chan)(struct ieee80211_hw *, struct ieee80211_conf *); u8 (*calc_rssi)(u8 agc, u8 sq); }; /** * enum rtl818x_tx_desc_flags - Tx/Rx flags are common between RTL818X chips * * @RTL818X_TX_DESC_FLAG_NO_ENC: Disable hardware based encryption. * @RTL818X_TX_DESC_FLAG_TX_OK: TX frame was ACKed. * @RTL818X_TX_DESC_FLAG_SPLCP: Use short preamble. * @RTL818X_TX_DESC_FLAG_MOREFRAG: More fragments follow. * @RTL818X_TX_DESC_FLAG_CTS: Use CTS-to-self protection. * @RTL818X_TX_DESC_FLAG_RTS: Use RTS/CTS protection. * @RTL818X_TX_DESC_FLAG_LS: Last segment of the frame. * @RTL818X_TX_DESC_FLAG_FS: First segment of the frame. */ enum rtl818x_tx_desc_flags { RTL818X_TX_DESC_FLAG_NO_ENC = (1 << 15), RTL818X_TX_DESC_FLAG_TX_OK = (1 << 15), RTL818X_TX_DESC_FLAG_SPLCP = (1 << 16), RTL818X_TX_DESC_FLAG_RX_UNDER = (1 << 16), RTL818X_TX_DESC_FLAG_MOREFRAG = (1 << 17), RTL818X_TX_DESC_FLAG_CTS = (1 << 18), RTL818X_TX_DESC_FLAG_RTS = (1 << 23), RTL818X_TX_DESC_FLAG_LS = (1 << 28), RTL818X_TX_DESC_FLAG_FS = (1 << 29), RTL818X_TX_DESC_FLAG_DMA = (1 << 30), RTL818X_TX_DESC_FLAG_OWN = (1 << 31) }; enum rtl818x_rx_desc_flags { RTL818X_RX_DESC_FLAG_ICV_ERR = (1 << 12), RTL818X_RX_DESC_FLAG_CRC32_ERR = (1 << 13), RTL818X_RX_DESC_FLAG_PM = (1 << 14), RTL818X_RX_DESC_FLAG_RX_ERR = (1 << 15), RTL818X_RX_DESC_FLAG_BCAST = (1 << 16), RTL818X_RX_DESC_FLAG_PAM = (1 << 17), RTL818X_RX_DESC_FLAG_MCAST = (1 << 18), RTL818X_RX_DESC_FLAG_QOS = (1 << 19), /* RTL8187(B) only */ RTL818X_RX_DESC_FLAG_TRSW = (1 << 24), /* RTL8187(B) only */ RTL818X_RX_DESC_FLAG_SPLCP = (1 << 25), RTL818X_RX_DESC_FLAG_FOF = (1 << 26), RTL818X_RX_DESC_FLAG_DMA_FAIL = (1 << 27), RTL818X_RX_DESC_FLAG_LS = (1 << 28), RTL818X_RX_DESC_FLAG_FS = (1 << 29), RTL818X_RX_DESC_FLAG_EOR = (1 << 30), RTL818X_RX_DESC_FLAG_OWN = (1 << 31) }; #endif /* RTL818X_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1