Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Karl-Heinz Schneider | 1161 | 62.32% | 1 | 11.11% |
Phil Reid | 616 | 33.06% | 1 | 11.11% |
Sebastian Reichel | 70 | 3.76% | 3 | 33.33% |
Uwe Kleine-König | 9 | 0.48% | 1 | 11.11% |
Wolfram Sang | 5 | 0.27% | 2 | 22.22% |
Thomas Gleixner | 2 | 0.11% | 1 | 11.11% |
Total | 1863 | 9 |
// SPDX-License-Identifier: GPL-2.0-only /* * Driver for SBS compliant Smart Battery System Managers * * The device communicates via i2c at address 0x0a and multiplexes access to up * to four smart batteries at address 0x0b. * * Via sysfs interface the online state and charge type are presented. * * Datasheet SBSM: http://sbs-forum.org/specs/sbsm100b.pdf * Datasheet LTC1760: http://cds.linear.com/docs/en/datasheet/1760fb.pdf * * Karl-Heinz Schneider <karl-heinz@schneider-inet.de> */ #include <linux/gpio/driver.h> #include <linux/module.h> #include <linux/i2c.h> #include <linux/i2c-mux.h> #include <linux/power_supply.h> #include <linux/property.h> #define SBSM_MAX_BATS 4 #define SBSM_RETRY_CNT 3 /* registers addresses */ #define SBSM_CMD_BATSYSSTATE 0x01 #define SBSM_CMD_BATSYSSTATECONT 0x02 #define SBSM_CMD_BATSYSINFO 0x04 #define SBSM_CMD_LTC 0x3c #define SBSM_MASK_BAT_SUPPORTED GENMASK(3, 0) #define SBSM_MASK_CHARGE_BAT GENMASK(7, 4) #define SBSM_BIT_AC_PRESENT BIT(0) #define SBSM_BIT_TURBO BIT(7) #define SBSM_SMB_BAT_OFFSET 11 struct sbsm_data { struct i2c_client *client; struct i2c_mux_core *muxc; struct power_supply *psy; u8 cur_chan; /* currently selected channel */ struct gpio_chip chip; bool is_ltc1760; /* special capabilities */ unsigned int supported_bats; unsigned int last_state; unsigned int last_state_cont; }; static enum power_supply_property sbsm_props[] = { POWER_SUPPLY_PROP_ONLINE, POWER_SUPPLY_PROP_CHARGE_TYPE, }; static int sbsm_read_word(struct i2c_client *client, u8 address) { int reg, retries; for (retries = SBSM_RETRY_CNT; retries > 0; retries--) { reg = i2c_smbus_read_word_data(client, address); if (reg >= 0) break; } if (reg < 0) { dev_err(&client->dev, "failed to read register 0x%02x\n", address); } return reg; } static int sbsm_write_word(struct i2c_client *client, u8 address, u16 word) { int ret, retries; for (retries = SBSM_RETRY_CNT; retries > 0; retries--) { ret = i2c_smbus_write_word_data(client, address, word); if (ret >= 0) break; } if (ret < 0) dev_err(&client->dev, "failed to write to register 0x%02x\n", address); return ret; } static int sbsm_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) { struct sbsm_data *data = power_supply_get_drvdata(psy); int regval = 0; switch (psp) { case POWER_SUPPLY_PROP_ONLINE: regval = sbsm_read_word(data->client, SBSM_CMD_BATSYSSTATECONT); if (regval < 0) return regval; val->intval = !!(regval & SBSM_BIT_AC_PRESENT); break; case POWER_SUPPLY_PROP_CHARGE_TYPE: regval = sbsm_read_word(data->client, SBSM_CMD_BATSYSSTATE); if (regval < 0) return regval; if ((regval & SBSM_MASK_CHARGE_BAT) == 0) { val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; return 0; } val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; if (data->is_ltc1760) { /* charge mode fast if turbo is active */ regval = sbsm_read_word(data->client, SBSM_CMD_LTC); if (regval < 0) return regval; else if (regval & SBSM_BIT_TURBO) val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; } break; default: return -EINVAL; } return 0; } static int sbsm_prop_is_writeable(struct power_supply *psy, enum power_supply_property psp) { struct sbsm_data *data = power_supply_get_drvdata(psy); return (psp == POWER_SUPPLY_PROP_CHARGE_TYPE) && data->is_ltc1760; } static int sbsm_set_property(struct power_supply *psy, enum power_supply_property psp, const union power_supply_propval *val) { struct sbsm_data *data = power_supply_get_drvdata(psy); int ret = -EINVAL; u16 regval; switch (psp) { case POWER_SUPPLY_PROP_CHARGE_TYPE: /* write 1 to TURBO if type fast is given */ if (!data->is_ltc1760) break; regval = val->intval == POWER_SUPPLY_CHARGE_TYPE_FAST ? SBSM_BIT_TURBO : 0; ret = sbsm_write_word(data->client, SBSM_CMD_LTC, regval); break; default: break; } return ret; } /* * Switch to battery * Parameter chan is directly the content of SMB_BAT* nibble */ static int sbsm_select(struct i2c_mux_core *muxc, u32 chan) { struct sbsm_data *data = i2c_mux_priv(muxc); struct device *dev = &data->client->dev; int ret = 0; u16 reg; if (data->cur_chan == chan) return ret; /* chan goes from 1 ... 4 */ reg = BIT(SBSM_SMB_BAT_OFFSET + chan); ret = sbsm_write_word(data->client, SBSM_CMD_BATSYSSTATE, reg); if (ret) dev_err(dev, "Failed to select channel %i\n", chan); else data->cur_chan = chan; return ret; } static int sbsm_gpio_get_value(struct gpio_chip *gc, unsigned int off) { struct sbsm_data *data = gpiochip_get_data(gc); int ret; ret = sbsm_read_word(data->client, SBSM_CMD_BATSYSSTATE); if (ret < 0) return ret; return ret & BIT(off); } /* * This needs to be defined or the GPIO lib fails to register the pin. * But the 'gpio' is always an input. */ static int sbsm_gpio_direction_input(struct gpio_chip *gc, unsigned int off) { return 0; } static int sbsm_do_alert(struct device *dev, void *d) { struct i2c_client *client = i2c_verify_client(dev); struct i2c_driver *driver; if (!client || client->addr != 0x0b) return 0; device_lock(dev); if (client->dev.driver) { driver = to_i2c_driver(client->dev.driver); if (driver->alert) driver->alert(client, I2C_PROTOCOL_SMBUS_ALERT, 0); else dev_warn(&client->dev, "no driver alert()!\n"); } else { dev_dbg(&client->dev, "alert with no driver\n"); } device_unlock(dev); return -EBUSY; } static void sbsm_alert(struct i2c_client *client, enum i2c_alert_protocol prot, unsigned int d) { struct sbsm_data *sbsm = i2c_get_clientdata(client); int ret, i, irq_bat = 0, state = 0; ret = sbsm_read_word(sbsm->client, SBSM_CMD_BATSYSSTATE); if (ret >= 0) { irq_bat = ret ^ sbsm->last_state; sbsm->last_state = ret; state = ret; } ret = sbsm_read_word(sbsm->client, SBSM_CMD_BATSYSSTATECONT); if ((ret >= 0) && ((ret ^ sbsm->last_state_cont) & SBSM_BIT_AC_PRESENT)) { irq_bat |= sbsm->supported_bats & state; power_supply_changed(sbsm->psy); } sbsm->last_state_cont = ret; for (i = 0; i < SBSM_MAX_BATS; i++) { if (irq_bat & BIT(i)) { device_for_each_child(&sbsm->muxc->adapter[i]->dev, NULL, sbsm_do_alert); } } } static int sbsm_gpio_setup(struct sbsm_data *data) { struct gpio_chip *gc = &data->chip; struct i2c_client *client = data->client; struct device *dev = &client->dev; int ret; if (!device_property_present(dev, "gpio-controller")) return 0; ret = sbsm_read_word(client, SBSM_CMD_BATSYSSTATE); if (ret < 0) return ret; data->last_state = ret; ret = sbsm_read_word(client, SBSM_CMD_BATSYSSTATECONT); if (ret < 0) return ret; data->last_state_cont = ret; gc->get = sbsm_gpio_get_value; gc->direction_input = sbsm_gpio_direction_input; gc->can_sleep = true; gc->base = -1; gc->ngpio = SBSM_MAX_BATS; gc->label = client->name; gc->parent = dev; gc->owner = THIS_MODULE; ret = devm_gpiochip_add_data(dev, gc, data); if (ret) return dev_err_probe(dev, ret, "devm_gpiochip_add_data failed\n"); return ret; } static const struct power_supply_desc sbsm_default_psy_desc = { .type = POWER_SUPPLY_TYPE_MAINS, .properties = sbsm_props, .num_properties = ARRAY_SIZE(sbsm_props), .get_property = &sbsm_get_property, .set_property = &sbsm_set_property, .property_is_writeable = &sbsm_prop_is_writeable, }; static void sbsm_del_mux_adapter(void *data) { struct sbsm_data *sbsm = data; i2c_mux_del_adapters(sbsm->muxc); } static int sbsm_probe(struct i2c_client *client) { const struct i2c_device_id *id = i2c_client_get_device_id(client); struct i2c_adapter *adapter = client->adapter; struct sbsm_data *data; struct device *dev = &client->dev; struct power_supply_desc *psy_desc; struct power_supply_config psy_cfg = {}; int ret = 0, i; /* Device listens only at address 0x0a */ if (client->addr != 0x0a) return -EINVAL; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) return -EPFNOSUPPORT; data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; i2c_set_clientdata(client, data); data->client = client; data->is_ltc1760 = !!strstr(id->name, "ltc1760"); ret = sbsm_read_word(client, SBSM_CMD_BATSYSINFO); if (ret < 0) return ret; data->supported_bats = ret & SBSM_MASK_BAT_SUPPORTED; data->muxc = i2c_mux_alloc(adapter, dev, SBSM_MAX_BATS, 0, I2C_MUX_LOCKED, &sbsm_select, NULL); if (!data->muxc) return dev_err_probe(dev, -ENOMEM, "failed to alloc i2c mux\n"); data->muxc->priv = data; ret = devm_add_action_or_reset(dev, sbsm_del_mux_adapter, data); if (ret) return ret; /* register muxed i2c channels. One for each supported battery */ for (i = 0; i < SBSM_MAX_BATS; ++i) { if (data->supported_bats & BIT(i)) { ret = i2c_mux_add_adapter(data->muxc, 0, i + 1, 0); if (ret) break; } } if (ret) return dev_err_probe(dev, ret, "failed to register i2c mux channel %d\n", i + 1); psy_desc = devm_kmemdup(dev, &sbsm_default_psy_desc, sizeof(*psy_desc), GFP_KERNEL); if (!psy_desc) return -ENOMEM; psy_desc->name = devm_kasprintf(dev, GFP_KERNEL, "sbsm-%s", dev_name(&client->dev)); if (!psy_desc->name) return -ENOMEM; ret = sbsm_gpio_setup(data); if (ret < 0) return ret; psy_cfg.drv_data = data; psy_cfg.of_node = dev->of_node; data->psy = devm_power_supply_register(dev, psy_desc, &psy_cfg); if (IS_ERR(data->psy)) return dev_err_probe(dev, PTR_ERR(data->psy), "failed to register power supply %s\n", psy_desc->name); return 0; } static const struct i2c_device_id sbsm_ids[] = { { "sbs-manager", 0 }, { "ltc1760", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, sbsm_ids); #ifdef CONFIG_OF static const struct of_device_id sbsm_dt_ids[] = { { .compatible = "sbs,sbs-manager" }, { .compatible = "lltc,ltc1760" }, { } }; MODULE_DEVICE_TABLE(of, sbsm_dt_ids); #endif static struct i2c_driver sbsm_driver = { .driver = { .name = "sbsm", .of_match_table = of_match_ptr(sbsm_dt_ids), }, .probe_new = sbsm_probe, .alert = sbsm_alert, .id_table = sbsm_ids }; module_i2c_driver(sbsm_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Karl-Heinz Schneider <karl-heinz@schneider-inet.de>"); MODULE_DESCRIPTION("SBSM Smart Battery System Manager");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1