Contributors: 29
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| Mark Brown |
415 |
29.90% |
14 |
26.92% |
| Philippe Schenker |
302 |
21.76% |
1 |
1.92% |
| Rajendra Nayak |
202 |
14.55% |
1 |
1.92% |
| Dmitry Eremin-Solenikov |
185 |
13.33% |
1 |
1.92% |
| Laxman Dewangan |
49 |
3.53% |
3 |
5.77% |
| Linus Walleij |
47 |
3.39% |
3 |
5.77% |
| Axel Lin |
33 |
2.38% |
6 |
11.54% |
| Stephen Warren |
32 |
2.31% |
1 |
1.92% |
| Manish Badarkhe |
27 |
1.95% |
1 |
1.92% |
| Peng Fan |
18 |
1.30% |
1 |
1.92% |
| Richard Zhao |
13 |
0.94% |
2 |
3.85% |
| Javier Martinez Canillas |
8 |
0.58% |
1 |
1.92% |
| Chris Morgan |
6 |
0.43% |
1 |
1.92% |
| Christophe Jaillet |
6 |
0.43% |
1 |
1.92% |
| Sascha Hauer |
6 |
0.43% |
1 |
1.92% |
| Roger Quadros |
5 |
0.36% |
1 |
1.92% |
| Rouven Czerwinski |
5 |
0.36% |
1 |
1.92% |
| Jingoo Han |
4 |
0.29% |
1 |
1.92% |
| Dmitry Torokhov |
4 |
0.29% |
1 |
1.92% |
| Shawn Guo |
4 |
0.29% |
1 |
1.92% |
| Paul Gortmaker |
3 |
0.22% |
1 |
1.92% |
| Rikard Falkeborn |
3 |
0.22% |
1 |
1.92% |
| Sergei Shtylyov |
3 |
0.22% |
1 |
1.92% |
| Thomas Gleixner |
2 |
0.14% |
1 |
1.92% |
| Linus Torvalds (pre-git) |
2 |
0.14% |
1 |
1.92% |
| Linus Torvalds |
1 |
0.07% |
1 |
1.92% |
| Kieran Bingham |
1 |
0.07% |
1 |
1.92% |
| Colin Ian King |
1 |
0.07% |
1 |
1.92% |
| Sachin Kamat |
1 |
0.07% |
1 |
1.92% |
| Total |
1388 |
|
52 |
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* fixed.c
*
* Copyright 2008 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* Copyright (c) 2009 Nokia Corporation
* Roger Quadros <ext-roger.quadros@nokia.com>
*
* This is useful for systems with mixed controllable and
* non-controllable regulators, as well as for allowing testing on
* systems with no controllable regulators.
*/
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_opp.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/fixed.h>
#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/machine.h>
#include <linux/clk.h>
struct fixed_voltage_data {
struct regulator_desc desc;
struct regulator_dev *dev;
struct clk *enable_clock;
unsigned int enable_counter;
int performance_state;
};
struct fixed_dev_type {
bool has_enable_clock;
bool has_performance_state;
};
static int reg_clock_enable(struct regulator_dev *rdev)
{
struct fixed_voltage_data *priv = rdev_get_drvdata(rdev);
int ret = 0;
ret = clk_prepare_enable(priv->enable_clock);
if (ret)
return ret;
priv->enable_counter++;
return ret;
}
static int reg_clock_disable(struct regulator_dev *rdev)
{
struct fixed_voltage_data *priv = rdev_get_drvdata(rdev);
clk_disable_unprepare(priv->enable_clock);
priv->enable_counter--;
return 0;
}
static int reg_domain_enable(struct regulator_dev *rdev)
{
struct fixed_voltage_data *priv = rdev_get_drvdata(rdev);
struct device *dev = rdev->dev.parent;
int ret;
ret = dev_pm_genpd_set_performance_state(dev, priv->performance_state);
if (ret)
return ret;
priv->enable_counter++;
return ret;
}
static int reg_domain_disable(struct regulator_dev *rdev)
{
struct fixed_voltage_data *priv = rdev_get_drvdata(rdev);
struct device *dev = rdev->dev.parent;
int ret;
ret = dev_pm_genpd_set_performance_state(dev, 0);
if (ret)
return ret;
priv->enable_counter--;
return 0;
}
static int reg_is_enabled(struct regulator_dev *rdev)
{
struct fixed_voltage_data *priv = rdev_get_drvdata(rdev);
return priv->enable_counter > 0;
}
/**
* of_get_fixed_voltage_config - extract fixed_voltage_config structure info
* @dev: device requesting for fixed_voltage_config
* @desc: regulator description
*
* Populates fixed_voltage_config structure by extracting data from device
* tree node, returns a pointer to the populated structure of NULL if memory
* alloc fails.
*/
static struct fixed_voltage_config *
of_get_fixed_voltage_config(struct device *dev,
const struct regulator_desc *desc)
{
struct fixed_voltage_config *config;
struct device_node *np = dev->of_node;
struct regulator_init_data *init_data;
config = devm_kzalloc(dev, sizeof(struct fixed_voltage_config),
GFP_KERNEL);
if (!config)
return ERR_PTR(-ENOMEM);
config->init_data = of_get_regulator_init_data(dev, dev->of_node, desc);
if (!config->init_data)
return ERR_PTR(-EINVAL);
init_data = config->init_data;
init_data->constraints.apply_uV = 0;
config->supply_name = init_data->constraints.name;
if (init_data->constraints.min_uV == init_data->constraints.max_uV) {
config->microvolts = init_data->constraints.min_uV;
} else {
dev_err(dev,
"Fixed regulator specified with variable voltages\n");
return ERR_PTR(-EINVAL);
}
if (init_data->constraints.boot_on)
config->enabled_at_boot = true;
of_property_read_u32(np, "startup-delay-us", &config->startup_delay);
of_property_read_u32(np, "off-on-delay-us", &config->off_on_delay);
if (of_find_property(np, "vin-supply", NULL))
config->input_supply = "vin";
return config;
}
static const struct regulator_ops fixed_voltage_ops = {
};
static const struct regulator_ops fixed_voltage_clkenabled_ops = {
.enable = reg_clock_enable,
.disable = reg_clock_disable,
.is_enabled = reg_is_enabled,
};
static const struct regulator_ops fixed_voltage_domain_ops = {
.enable = reg_domain_enable,
.disable = reg_domain_disable,
.is_enabled = reg_is_enabled,
};
static int reg_fixed_voltage_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct fixed_voltage_config *config;
struct fixed_voltage_data *drvdata;
const struct fixed_dev_type *drvtype = of_device_get_match_data(dev);
struct regulator_config cfg = { };
enum gpiod_flags gflags;
int ret;
drvdata = devm_kzalloc(&pdev->dev, sizeof(struct fixed_voltage_data),
GFP_KERNEL);
if (!drvdata)
return -ENOMEM;
if (pdev->dev.of_node) {
config = of_get_fixed_voltage_config(&pdev->dev,
&drvdata->desc);
if (IS_ERR(config))
return PTR_ERR(config);
} else {
config = dev_get_platdata(&pdev->dev);
}
if (!config)
return -ENOMEM;
drvdata->desc.name = devm_kstrdup(&pdev->dev,
config->supply_name,
GFP_KERNEL);
if (drvdata->desc.name == NULL) {
dev_err(&pdev->dev, "Failed to allocate supply name\n");
return -ENOMEM;
}
drvdata->desc.type = REGULATOR_VOLTAGE;
drvdata->desc.owner = THIS_MODULE;
if (drvtype && drvtype->has_enable_clock) {
drvdata->desc.ops = &fixed_voltage_clkenabled_ops;
drvdata->enable_clock = devm_clk_get(dev, NULL);
if (IS_ERR(drvdata->enable_clock)) {
dev_err(dev, "Can't get enable-clock from devicetree\n");
return PTR_ERR(drvdata->enable_clock);
}
} else if (drvtype && drvtype->has_performance_state) {
drvdata->desc.ops = &fixed_voltage_domain_ops;
drvdata->performance_state = of_get_required_opp_performance_state(dev->of_node, 0);
if (drvdata->performance_state < 0) {
dev_err(dev, "Can't get performance state from devicetree\n");
return drvdata->performance_state;
}
} else {
drvdata->desc.ops = &fixed_voltage_ops;
}
drvdata->desc.enable_time = config->startup_delay;
drvdata->desc.off_on_delay = config->off_on_delay;
if (config->input_supply) {
drvdata->desc.supply_name = devm_kstrdup(&pdev->dev,
config->input_supply,
GFP_KERNEL);
if (!drvdata->desc.supply_name)
return -ENOMEM;
}
if (config->microvolts)
drvdata->desc.n_voltages = 1;
drvdata->desc.fixed_uV = config->microvolts;
/*
* The signal will be inverted by the GPIO core if flagged so in the
* descriptor.
*/
if (config->enabled_at_boot)
gflags = GPIOD_OUT_HIGH;
else
gflags = GPIOD_OUT_LOW;
/*
* Some fixed regulators share the enable line between two
* regulators which makes it necessary to get a handle on the
* same descriptor for two different consumers. This will get
* the GPIO descriptor, but only the first call will initialize
* it so any flags such as inversion or open drain will only
* be set up by the first caller and assumed identical on the
* next caller.
*
* FIXME: find a better way to deal with this.
*/
gflags |= GPIOD_FLAGS_BIT_NONEXCLUSIVE;
/*
* Do not use devm* here: the regulator core takes over the
* lifecycle management of the GPIO descriptor.
*/
cfg.ena_gpiod = gpiod_get_optional(&pdev->dev, NULL, gflags);
if (IS_ERR(cfg.ena_gpiod))
return dev_err_probe(&pdev->dev, PTR_ERR(cfg.ena_gpiod),
"can't get GPIO\n");
cfg.dev = &pdev->dev;
cfg.init_data = config->init_data;
cfg.driver_data = drvdata;
cfg.of_node = pdev->dev.of_node;
drvdata->dev = devm_regulator_register(&pdev->dev, &drvdata->desc,
&cfg);
if (IS_ERR(drvdata->dev)) {
ret = dev_err_probe(&pdev->dev, PTR_ERR(drvdata->dev),
"Failed to register regulator: %ld\n",
PTR_ERR(drvdata->dev));
return ret;
}
platform_set_drvdata(pdev, drvdata);
dev_dbg(&pdev->dev, "%s supplying %duV\n", drvdata->desc.name,
drvdata->desc.fixed_uV);
return 0;
}
#if defined(CONFIG_OF)
static const struct fixed_dev_type fixed_voltage_data = {
.has_enable_clock = false,
};
static const struct fixed_dev_type fixed_clkenable_data = {
.has_enable_clock = true,
};
static const struct fixed_dev_type fixed_domain_data = {
.has_performance_state = true,
};
static const struct of_device_id fixed_of_match[] = {
{
.compatible = "regulator-fixed",
.data = &fixed_voltage_data,
},
{
.compatible = "regulator-fixed-clock",
.data = &fixed_clkenable_data,
},
{
.compatible = "regulator-fixed-domain",
.data = &fixed_domain_data,
},
{
},
};
MODULE_DEVICE_TABLE(of, fixed_of_match);
#endif
static struct platform_driver regulator_fixed_voltage_driver = {
.probe = reg_fixed_voltage_probe,
.driver = {
.name = "reg-fixed-voltage",
.of_match_table = of_match_ptr(fixed_of_match),
},
};
static int __init regulator_fixed_voltage_init(void)
{
return platform_driver_register(®ulator_fixed_voltage_driver);
}
subsys_initcall(regulator_fixed_voltage_init);
static void __exit regulator_fixed_voltage_exit(void)
{
platform_driver_unregister(®ulator_fixed_voltage_driver);
}
module_exit(regulator_fixed_voltage_exit);
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_DESCRIPTION("Fixed voltage regulator");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:reg-fixed-voltage");