Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
John Garry | 1515 | 66.71% | 3 | 21.43% |
Yicong Yang | 754 | 33.20% | 9 | 64.29% |
Jonathan Neuschäfer | 1 | 0.04% | 1 | 7.14% |
Colin Ian King | 1 | 0.04% | 1 | 7.14% |
Total | 2271 | 14 |
// SPDX-License-Identifier: GPL-2.0-only // // HiSilicon SPI NOR V3XX Flash Controller Driver for hi16xx chipsets // // Copyright (c) 2019 HiSilicon Technologies Co., Ltd. // Author: John Garry <john.garry@huawei.com> #include <linux/bitops.h> #include <linux/completion.h> #include <linux/dmi.h> #include <linux/interrupt.h> #include <linux/iopoll.h> #include <linux/module.h> #include <linux/mod_devicetable.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/spi/spi.h> #include <linux/spi/spi-mem.h> #define HISI_SFC_V3XX_VERSION (0x1f8) #define HISI_SFC_V3XX_GLB_CFG (0x100) #define HISI_SFC_V3XX_GLB_CFG_CS0_ADDR_MODE BIT(2) #define HISI_SFC_V3XX_RAW_INT_STAT (0x120) #define HISI_SFC_V3XX_INT_STAT (0x124) #define HISI_SFC_V3XX_INT_MASK (0x128) #define HISI_SFC_V3XX_INT_CLR (0x12c) #define HISI_SFC_V3XX_CMD_CFG (0x300) #define HISI_SFC_V3XX_CMD_CFG_DATA_CNT_OFF 9 #define HISI_SFC_V3XX_CMD_CFG_RW_MSK BIT(8) #define HISI_SFC_V3XX_CMD_CFG_DATA_EN_MSK BIT(7) #define HISI_SFC_V3XX_CMD_CFG_DUMMY_CNT_OFF 4 #define HISI_SFC_V3XX_CMD_CFG_ADDR_EN_MSK BIT(3) #define HISI_SFC_V3XX_CMD_CFG_CS_SEL_OFF 1 #define HISI_SFC_V3XX_CMD_CFG_START_MSK BIT(0) #define HISI_SFC_V3XX_CMD_INS (0x308) #define HISI_SFC_V3XX_CMD_ADDR (0x30c) #define HISI_SFC_V3XX_CMD_DATABUF0 (0x400) /* Common definition of interrupt bit masks */ #define HISI_SFC_V3XX_INT_MASK_ALL (0x1ff) /* all the masks */ #define HISI_SFC_V3XX_INT_MASK_CPLT BIT(0) /* command execution complete */ #define HISI_SFC_V3XX_INT_MASK_PP_ERR BIT(2) /* page progrom error */ #define HISI_SFC_V3XX_INT_MASK_IACCES BIT(5) /* error visiting inaccessible/ * protected address */ /* IO Mode definition in HISI_SFC_V3XX_CMD_CFG */ #define HISI_SFC_V3XX_STD (0 << 17) #define HISI_SFC_V3XX_DIDO (1 << 17) #define HISI_SFC_V3XX_DIO (2 << 17) #define HISI_SFC_V3XX_FULL_DIO (3 << 17) #define HISI_SFC_V3XX_QIQO (5 << 17) #define HISI_SFC_V3XX_QIO (6 << 17) #define HISI_SFC_V3XX_FULL_QIO (7 << 17) /* * The IO modes lookup table. hisi_sfc_v3xx_io_modes[(z - 1) / 2][y / 2][x / 2] * stands for x-y-z mode, as described in SFDP terminology. -EIO indicates * an invalid mode. */ static const int hisi_sfc_v3xx_io_modes[2][3][3] = { { { HISI_SFC_V3XX_DIDO, HISI_SFC_V3XX_DIDO, HISI_SFC_V3XX_DIDO }, { HISI_SFC_V3XX_DIO, HISI_SFC_V3XX_FULL_DIO, -EIO }, { -EIO, -EIO, -EIO }, }, { { HISI_SFC_V3XX_QIQO, HISI_SFC_V3XX_QIQO, HISI_SFC_V3XX_QIQO }, { -EIO, -EIO, -EIO }, { HISI_SFC_V3XX_QIO, -EIO, HISI_SFC_V3XX_FULL_QIO }, }, }; struct hisi_sfc_v3xx_host { struct device *dev; void __iomem *regbase; int max_cmd_dword; struct completion *completion; u8 address_mode; int irq; }; static void hisi_sfc_v3xx_disable_int(struct hisi_sfc_v3xx_host *host) { writel(0, host->regbase + HISI_SFC_V3XX_INT_MASK); } static void hisi_sfc_v3xx_enable_int(struct hisi_sfc_v3xx_host *host) { writel(HISI_SFC_V3XX_INT_MASK_ALL, host->regbase + HISI_SFC_V3XX_INT_MASK); } static void hisi_sfc_v3xx_clear_int(struct hisi_sfc_v3xx_host *host) { writel(HISI_SFC_V3XX_INT_MASK_ALL, host->regbase + HISI_SFC_V3XX_INT_CLR); } /* * The interrupt status register indicates whether an error occurs * after per operation. Check it, and clear the interrupts for * next time judgement. */ static int hisi_sfc_v3xx_handle_completion(struct hisi_sfc_v3xx_host *host) { u32 reg; reg = readl(host->regbase + HISI_SFC_V3XX_RAW_INT_STAT); hisi_sfc_v3xx_clear_int(host); if (reg & HISI_SFC_V3XX_INT_MASK_IACCES) { dev_err(host->dev, "fail to access protected address\n"); return -EIO; } if (reg & HISI_SFC_V3XX_INT_MASK_PP_ERR) { dev_err(host->dev, "page program operation failed\n"); return -EIO; } /* * The other bits of the interrupt registers is not currently * used and probably not be triggered in this driver. When it * happens, we regard it as an unsupported error here. */ if (!(reg & HISI_SFC_V3XX_INT_MASK_CPLT)) { dev_err(host->dev, "unsupported error occurred, status=0x%x\n", reg); return -EIO; } return 0; } #define HISI_SFC_V3XX_WAIT_TIMEOUT_US 1000000 #define HISI_SFC_V3XX_WAIT_POLL_INTERVAL_US 10 static int hisi_sfc_v3xx_wait_cmd_idle(struct hisi_sfc_v3xx_host *host) { u32 reg; return readl_poll_timeout(host->regbase + HISI_SFC_V3XX_CMD_CFG, reg, !(reg & HISI_SFC_V3XX_CMD_CFG_START_MSK), HISI_SFC_V3XX_WAIT_POLL_INTERVAL_US, HISI_SFC_V3XX_WAIT_TIMEOUT_US); } static int hisi_sfc_v3xx_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) { struct spi_device *spi = mem->spi; struct hisi_sfc_v3xx_host *host; uintptr_t addr = (uintptr_t)op->data.buf.in; int max_byte_count; host = spi_controller_get_devdata(spi->master); max_byte_count = host->max_cmd_dword * 4; if (!IS_ALIGNED(addr, 4) && op->data.nbytes >= 4) op->data.nbytes = 4 - (addr % 4); else if (op->data.nbytes > max_byte_count) op->data.nbytes = max_byte_count; return 0; } /* * The controller only supports Standard SPI mode, Dual mode and * Quad mode. Double sanitize the ops here to avoid OOB access. */ static bool hisi_sfc_v3xx_supports_op(struct spi_mem *mem, const struct spi_mem_op *op) { struct spi_device *spi = mem->spi; struct hisi_sfc_v3xx_host *host; host = spi_controller_get_devdata(spi->master); if (op->data.buswidth > 4 || op->dummy.buswidth > 4 || op->addr.buswidth > 4 || op->cmd.buswidth > 4) return false; if (op->addr.nbytes != host->address_mode && op->addr.nbytes) return false; return spi_mem_default_supports_op(mem, op); } /* * memcpy_{to,from}io doesn't gurantee 32b accesses - which we require for the * DATABUF registers -so use __io{read,write}32_copy when possible. For * trailing bytes, copy them byte-by-byte from the DATABUF register, as we * can't clobber outside the source/dest buffer. * * For efficient data read/write, we try to put any start 32b unaligned data * into a separate transaction in hisi_sfc_v3xx_adjust_op_size(). */ static void hisi_sfc_v3xx_read_databuf(struct hisi_sfc_v3xx_host *host, u8 *to, unsigned int len) { void __iomem *from; int i; from = host->regbase + HISI_SFC_V3XX_CMD_DATABUF0; if (IS_ALIGNED((uintptr_t)to, 4)) { int words = len / 4; __ioread32_copy(to, from, words); len -= words * 4; if (len) { u32 val; to += words * 4; from += words * 4; val = __raw_readl(from); for (i = 0; i < len; i++, val >>= 8, to++) *to = (u8)val; } } else { for (i = 0; i < DIV_ROUND_UP(len, 4); i++, from += 4) { u32 val = __raw_readl(from); int j; for (j = 0; j < 4 && (j + (i * 4) < len); to++, val >>= 8, j++) *to = (u8)val; } } } static void hisi_sfc_v3xx_write_databuf(struct hisi_sfc_v3xx_host *host, const u8 *from, unsigned int len) { void __iomem *to; int i; to = host->regbase + HISI_SFC_V3XX_CMD_DATABUF0; if (IS_ALIGNED((uintptr_t)from, 4)) { int words = len / 4; __iowrite32_copy(to, from, words); len -= words * 4; if (len) { u32 val = 0; to += words * 4; from += words * 4; for (i = 0; i < len; i++, from++) val |= *from << i * 8; __raw_writel(val, to); } } else { for (i = 0; i < DIV_ROUND_UP(len, 4); i++, to += 4) { u32 val = 0; int j; for (j = 0; j < 4 && (j + (i * 4) < len); from++, j++) val |= *from << j * 8; __raw_writel(val, to); } } } static int hisi_sfc_v3xx_start_bus(struct hisi_sfc_v3xx_host *host, const struct spi_mem_op *op, u8 chip_select) { int len = op->data.nbytes, buswidth_mode; u32 config = 0; if (op->addr.nbytes) config |= HISI_SFC_V3XX_CMD_CFG_ADDR_EN_MSK; if (op->data.buswidth == 0 || op->data.buswidth == 1) { buswidth_mode = HISI_SFC_V3XX_STD; } else { int data_idx, addr_idx, cmd_idx; data_idx = (op->data.buswidth - 1) / 2; addr_idx = op->addr.buswidth / 2; cmd_idx = op->cmd.buswidth / 2; buswidth_mode = hisi_sfc_v3xx_io_modes[data_idx][addr_idx][cmd_idx]; } if (buswidth_mode < 0) return buswidth_mode; config |= buswidth_mode; if (op->data.dir != SPI_MEM_NO_DATA) { config |= (len - 1) << HISI_SFC_V3XX_CMD_CFG_DATA_CNT_OFF; config |= HISI_SFC_V3XX_CMD_CFG_DATA_EN_MSK; } if (op->data.dir == SPI_MEM_DATA_IN) config |= HISI_SFC_V3XX_CMD_CFG_RW_MSK; config |= op->dummy.nbytes << HISI_SFC_V3XX_CMD_CFG_DUMMY_CNT_OFF | chip_select << HISI_SFC_V3XX_CMD_CFG_CS_SEL_OFF | HISI_SFC_V3XX_CMD_CFG_START_MSK; writel(op->addr.val, host->regbase + HISI_SFC_V3XX_CMD_ADDR); writel(op->cmd.opcode, host->regbase + HISI_SFC_V3XX_CMD_INS); writel(config, host->regbase + HISI_SFC_V3XX_CMD_CFG); return 0; } static int hisi_sfc_v3xx_generic_exec_op(struct hisi_sfc_v3xx_host *host, const struct spi_mem_op *op, u8 chip_select) { DECLARE_COMPLETION_ONSTACK(done); int ret; if (host->irq) { host->completion = &done; hisi_sfc_v3xx_enable_int(host); } if (op->data.dir == SPI_MEM_DATA_OUT) hisi_sfc_v3xx_write_databuf(host, op->data.buf.out, op->data.nbytes); ret = hisi_sfc_v3xx_start_bus(host, op, chip_select); if (ret) return ret; if (host->irq) { ret = wait_for_completion_timeout(host->completion, usecs_to_jiffies(HISI_SFC_V3XX_WAIT_TIMEOUT_US)); if (!ret) ret = -ETIMEDOUT; else ret = 0; hisi_sfc_v3xx_disable_int(host); synchronize_irq(host->irq); host->completion = NULL; } else { ret = hisi_sfc_v3xx_wait_cmd_idle(host); } if (hisi_sfc_v3xx_handle_completion(host) || ret) return -EIO; if (op->data.dir == SPI_MEM_DATA_IN) hisi_sfc_v3xx_read_databuf(host, op->data.buf.in, op->data.nbytes); return 0; } static int hisi_sfc_v3xx_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) { struct hisi_sfc_v3xx_host *host; struct spi_device *spi = mem->spi; u8 chip_select = spi->chip_select; host = spi_controller_get_devdata(spi->master); return hisi_sfc_v3xx_generic_exec_op(host, op, chip_select); } static const struct spi_controller_mem_ops hisi_sfc_v3xx_mem_ops = { .adjust_op_size = hisi_sfc_v3xx_adjust_op_size, .supports_op = hisi_sfc_v3xx_supports_op, .exec_op = hisi_sfc_v3xx_exec_op, }; static irqreturn_t hisi_sfc_v3xx_isr(int irq, void *data) { struct hisi_sfc_v3xx_host *host = data; hisi_sfc_v3xx_disable_int(host); complete(host->completion); return IRQ_HANDLED; } static int hisi_sfc_v3xx_buswidth_override_bits; /* * ACPI FW does not allow us to currently set the device buswidth, so quirk it * depending on the board. */ static int __init hisi_sfc_v3xx_dmi_quirk(const struct dmi_system_id *d) { hisi_sfc_v3xx_buswidth_override_bits = SPI_RX_QUAD | SPI_TX_QUAD; return 0; } static const struct dmi_system_id hisi_sfc_v3xx_dmi_quirk_table[] = { { .callback = hisi_sfc_v3xx_dmi_quirk, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Huawei"), DMI_MATCH(DMI_PRODUCT_NAME, "D06"), }, }, { .callback = hisi_sfc_v3xx_dmi_quirk, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Huawei"), DMI_MATCH(DMI_PRODUCT_NAME, "TaiShan 2280 V2"), }, }, { .callback = hisi_sfc_v3xx_dmi_quirk, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Huawei"), DMI_MATCH(DMI_PRODUCT_NAME, "TaiShan 200 (Model 2280)"), }, }, {} }; static int hisi_sfc_v3xx_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct hisi_sfc_v3xx_host *host; struct spi_controller *ctlr; u32 version, glb_config; int ret; ctlr = spi_alloc_master(&pdev->dev, sizeof(*host)); if (!ctlr) return -ENOMEM; ctlr->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_DUAL | SPI_TX_QUAD; ctlr->buswidth_override_bits = hisi_sfc_v3xx_buswidth_override_bits; host = spi_controller_get_devdata(ctlr); host->dev = dev; platform_set_drvdata(pdev, host); host->regbase = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(host->regbase)) { ret = PTR_ERR(host->regbase); goto err_put_master; } host->irq = platform_get_irq_optional(pdev, 0); if (host->irq == -EPROBE_DEFER) { ret = -EPROBE_DEFER; goto err_put_master; } hisi_sfc_v3xx_disable_int(host); if (host->irq > 0) { ret = devm_request_irq(dev, host->irq, hisi_sfc_v3xx_isr, 0, "hisi-sfc-v3xx", host); if (ret) { dev_err(dev, "failed to request irq%d, ret = %d\n", host->irq, ret); host->irq = 0; } } else { host->irq = 0; } ctlr->bus_num = -1; ctlr->num_chipselect = 1; ctlr->mem_ops = &hisi_sfc_v3xx_mem_ops; /* * The address mode of the controller is either 3 or 4, * which is indicated by the address mode bit in * the global config register. The register is read only * for the OS driver. */ glb_config = readl(host->regbase + HISI_SFC_V3XX_GLB_CFG); if (glb_config & HISI_SFC_V3XX_GLB_CFG_CS0_ADDR_MODE) host->address_mode = 4; else host->address_mode = 3; version = readl(host->regbase + HISI_SFC_V3XX_VERSION); if (version >= 0x351) host->max_cmd_dword = 64; else host->max_cmd_dword = 16; ret = devm_spi_register_controller(dev, ctlr); if (ret) goto err_put_master; dev_info(&pdev->dev, "hw version 0x%x, %s mode.\n", version, host->irq ? "irq" : "polling"); return 0; err_put_master: spi_master_put(ctlr); return ret; } static const struct acpi_device_id hisi_sfc_v3xx_acpi_ids[] = { {"HISI0341", 0}, {} }; MODULE_DEVICE_TABLE(acpi, hisi_sfc_v3xx_acpi_ids); static struct platform_driver hisi_sfc_v3xx_spi_driver = { .driver = { .name = "hisi-sfc-v3xx", .acpi_match_table = hisi_sfc_v3xx_acpi_ids, }, .probe = hisi_sfc_v3xx_probe, }; static int __init hisi_sfc_v3xx_spi_init(void) { dmi_check_system(hisi_sfc_v3xx_dmi_quirk_table); return platform_driver_register(&hisi_sfc_v3xx_spi_driver); } static void __exit hisi_sfc_v3xx_spi_exit(void) { platform_driver_unregister(&hisi_sfc_v3xx_spi_driver); } module_init(hisi_sfc_v3xx_spi_init); module_exit(hisi_sfc_v3xx_spi_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("John Garry <john.garry@huawei.com>"); MODULE_DESCRIPTION("HiSilicon SPI NOR V3XX Flash Controller Driver for hi16xx chipsets");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1