| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Greg Kroah-Hartman | 3919 | 53.28% | 9 | 12.33% |
| Mike Dunn | 2389 | 32.48% | 3 | 4.11% |
| Johan Hovold | 267 | 3.63% | 21 | 28.77% |
| Kees Schoenmakers | 193 | 2.62% | 2 | 2.74% |
| Davidlohr Bueso A | 151 | 2.05% | 1 | 1.37% |
| Sudip Mukherjee | 105 | 1.43% | 2 | 2.74% |
| Alan Cox | 101 | 1.37% | 8 | 10.96% |
| Oliver Neukum | 66 | 0.90% | 5 | 6.85% |
| Linus Torvalds (pre-git) | 57 | 0.77% | 1 | 1.37% |
| Jiri Slaby | 28 | 0.38% | 6 | 8.22% |
| Harvey Harrison | 26 | 0.35% | 1 | 1.37% |
| Alan Stern | 19 | 0.26% | 2 | 2.74% |
| Dan Carpenter | 7 | 0.10% | 1 | 1.37% |
| Tom Rix | 7 | 0.10% | 1 | 1.37% |
| Peter Hurley | 6 | 0.08% | 1 | 1.37% |
| Huzaifa Sidhpurwala | 3 | 0.04% | 1 | 1.37% |
| Rahul Bedarkar | 2 | 0.03% | 1 | 1.37% |
| Ilpo Järvinen | 2 | 0.03% | 1 | 1.37% |
| Wolfram Sang | 2 | 0.03% | 1 | 1.37% |
| Márton Németh | 1 | 0.01% | 1 | 1.37% |
| Joe Perches | 1 | 0.01% | 1 | 1.37% |
| Jiang Jian | 1 | 0.01% | 1 | 1.37% |
| Alexey Khoroshilov | 1 | 0.01% | 1 | 1.37% |
| Uwe Kleine-König | 1 | 0.01% | 1 | 1.37% |
| Total | 7355 | 73 |
// SPDX-License-Identifier: GPL-2.0 /* * mos7720.c * Controls the Moschip 7720 usb to dual port serial converter * * Copyright 2006 Moschip Semiconductor Tech. Ltd. * * Developed by: * Vijaya Kumar <vijaykumar.gn@gmail.com> * Ajay Kumar <naanuajay@yahoo.com> * Gurudeva <ngurudeva@yahoo.com> * * Cleaned up from the original by: * Greg Kroah-Hartman <gregkh@suse.de> * * Originally based on drivers/usb/serial/io_edgeport.c which is: * Copyright (C) 2000 Inside Out Networks, All rights reserved. * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com> */ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/slab.h> #include <linux/tty.h> #include <linux/tty_driver.h> #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/spinlock.h> #include <linux/serial.h> #include <linux/serial_reg.h> #include <linux/usb.h> #include <linux/usb/serial.h> #include <linux/uaccess.h> #include <linux/parport.h> #define DRIVER_AUTHOR "Aspire Communications pvt Ltd." #define DRIVER_DESC "Moschip USB Serial Driver" /* default urb timeout */ #define MOS_WDR_TIMEOUT 5000 #define MOS_MAX_PORT 0x02 #define MOS_WRITE 0x0E #define MOS_READ 0x0D /* Interrupt Routines Defines */ #define SERIAL_IIR_RLS 0x06 #define SERIAL_IIR_RDA 0x04 #define SERIAL_IIR_CTI 0x0c #define SERIAL_IIR_THR 0x02 #define SERIAL_IIR_MS 0x00 #define NUM_URBS 16 /* URB Count */ #define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */ /* This structure holds all of the local serial port information */ struct moschip_port { __u8 shadowLCR; /* last LCR value received */ __u8 shadowMCR; /* last MCR value received */ __u8 shadowMSR; /* last MSR value received */ char open; struct usb_serial_port *port; /* loop back to the owner */ struct urb *write_urb_pool[NUM_URBS]; }; #define USB_VENDOR_ID_MOSCHIP 0x9710 #define MOSCHIP_DEVICE_ID_7720 0x7720 #define MOSCHIP_DEVICE_ID_7715 0x7715 static const struct usb_device_id id_table[] = { { USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) }, { USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7715) }, { } /* terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table); #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT /* initial values for parport regs */ #define DCR_INIT_VAL 0x0c /* SLCTIN, nINIT */ #define ECR_INIT_VAL 0x00 /* SPP mode */ enum mos7715_pp_modes { SPP = 0<<5, PS2 = 1<<5, /* moschip calls this 'NIBBLE' mode */ PPF = 2<<5, /* moschip calls this 'CB-FIFO mode */ }; struct mos7715_parport { struct parport *pp; /* back to containing struct */ struct kref ref_count; /* to instance of this struct */ bool msg_pending; /* usb sync call pending */ struct completion syncmsg_compl; /* usb sync call completed */ struct work_struct work; /* restore deferred writes */ struct usb_serial *serial; /* back to containing struct */ __u8 shadowECR; /* parallel port regs... */ __u8 shadowDCR; atomic_t shadowDSR; /* updated in int-in callback */ }; /* lock guards against dereferencing NULL ptr in parport ops callbacks */ static DEFINE_SPINLOCK(release_lock); #endif /* CONFIG_USB_SERIAL_MOS7715_PARPORT */ static const unsigned int dummy; /* for clarity in register access fns */ enum mos_regs { MOS7720_THR, /* serial port regs */ MOS7720_RHR, MOS7720_IER, MOS7720_FCR, MOS7720_ISR, MOS7720_LCR, MOS7720_MCR, MOS7720_LSR, MOS7720_MSR, MOS7720_SPR, MOS7720_DLL, MOS7720_DLM, MOS7720_DPR, /* parallel port regs */ MOS7720_DSR, MOS7720_DCR, MOS7720_ECR, MOS7720_SP1_REG, /* device control regs */ MOS7720_SP2_REG, /* serial port 2 (7720 only) */ MOS7720_PP_REG, MOS7720_SP_CONTROL_REG, }; /* * Return the correct value for the Windex field of the setup packet * for a control endpoint message. See the 7715 datasheet. */ static inline __u16 get_reg_index(enum mos_regs reg) { static const __u16 mos7715_index_lookup_table[] = { 0x00, /* MOS7720_THR */ 0x00, /* MOS7720_RHR */ 0x01, /* MOS7720_IER */ 0x02, /* MOS7720_FCR */ 0x02, /* MOS7720_ISR */ 0x03, /* MOS7720_LCR */ 0x04, /* MOS7720_MCR */ 0x05, /* MOS7720_LSR */ 0x06, /* MOS7720_MSR */ 0x07, /* MOS7720_SPR */ 0x00, /* MOS7720_DLL */ 0x01, /* MOS7720_DLM */ 0x00, /* MOS7720_DPR */ 0x01, /* MOS7720_DSR */ 0x02, /* MOS7720_DCR */ 0x0a, /* MOS7720_ECR */ 0x01, /* MOS7720_SP1_REG */ 0x02, /* MOS7720_SP2_REG (7720 only) */ 0x04, /* MOS7720_PP_REG (7715 only) */ 0x08, /* MOS7720_SP_CONTROL_REG */ }; return mos7715_index_lookup_table[reg]; } /* * Return the correct value for the upper byte of the Wvalue field of * the setup packet for a control endpoint message. */ static inline __u16 get_reg_value(enum mos_regs reg, unsigned int serial_portnum) { if (reg >= MOS7720_SP1_REG) /* control reg */ return 0x0000; else if (reg >= MOS7720_DPR) /* parallel port reg (7715 only) */ return 0x0100; else /* serial port reg */ return (serial_portnum + 2) << 8; } /* * Write data byte to the specified device register. The data is embedded in * the value field of the setup packet. serial_portnum is ignored for registers * not specific to a particular serial port. */ static int write_mos_reg(struct usb_serial *serial, unsigned int serial_portnum, enum mos_regs reg, __u8 data) { struct usb_device *usbdev = serial->dev; unsigned int pipe = usb_sndctrlpipe(usbdev, 0); __u8 request = (__u8)0x0e; __u8 requesttype = (__u8)0x40; __u16 index = get_reg_index(reg); __u16 value = get_reg_value(reg, serial_portnum) + data; int status = usb_control_msg(usbdev, pipe, request, requesttype, value, index, NULL, 0, MOS_WDR_TIMEOUT); if (status < 0) dev_err(&usbdev->dev, "mos7720: usb_control_msg() failed: %d\n", status); return status; } /* * Read data byte from the specified device register. The data returned by the * device is embedded in the value field of the setup packet. serial_portnum is * ignored for registers that are not specific to a particular serial port. */ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum, enum mos_regs reg, __u8 *data) { struct usb_device *usbdev = serial->dev; unsigned int pipe = usb_rcvctrlpipe(usbdev, 0); __u8 request = (__u8)0x0d; __u8 requesttype = (__u8)0xc0; __u16 index = get_reg_index(reg); __u16 value = get_reg_value(reg, serial_portnum); u8 *buf; int status; buf = kmalloc(1, GFP_KERNEL); if (!buf) { *data = 0; return -ENOMEM; } status = usb_control_msg(usbdev, pipe, request, requesttype, value, index, buf, 1, MOS_WDR_TIMEOUT); if (status == 1) { *data = *buf; } else { dev_err(&usbdev->dev, "mos7720: usb_control_msg() failed: %d\n", status); if (status >= 0) status = -EIO; *data = 0; } kfree(buf); return status; } #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT static inline int mos7715_change_mode(struct mos7715_parport *mos_parport, enum mos7715_pp_modes mode) { mos_parport->shadowECR = mode; write_mos_reg(mos_parport->serial, dummy, MOS7720_ECR, mos_parport->shadowECR); return 0; } static void destroy_mos_parport(struct kref *kref) { struct mos7715_parport *mos_parport = container_of(kref, struct mos7715_parport, ref_count); kfree(mos_parport); } /* * This is the common top part of all parallel port callback operations that * send synchronous messages to the device. This implements convoluted locking * that avoids two scenarios: (1) a port operation is called after usbserial * has called our release function, at which point struct mos7715_parport has * been destroyed, and (2) the device has been disconnected, but usbserial has * not called the release function yet because someone has a serial port open. * The shared release_lock prevents the first, and the mutex and disconnected * flag maintained by usbserial covers the second. We also use the msg_pending * flag to ensure that all synchronous usb message calls have completed before * our release function can return. */ static int parport_prologue(struct parport *pp) { struct mos7715_parport *mos_parport; spin_lock(&release_lock); mos_parport = pp->private_data; if (unlikely(mos_parport == NULL)) { /* release fn called, port struct destroyed */ spin_unlock(&release_lock); return -1; } mos_parport->msg_pending = true; /* synch usb call pending */ reinit_completion(&mos_parport->syncmsg_compl); spin_unlock(&release_lock); /* ensure writes from restore are submitted before new requests */ if (work_pending(&mos_parport->work)) flush_work(&mos_parport->work); mutex_lock(&mos_parport->serial->disc_mutex); if (mos_parport->serial->disconnected) { /* device disconnected */ mutex_unlock(&mos_parport->serial->disc_mutex); mos_parport->msg_pending = false; complete(&mos_parport->syncmsg_compl); return -1; } return 0; } /* * This is the common bottom part of all parallel port functions that send * synchronous messages to the device. */ static inline void parport_epilogue(struct parport *pp) { struct mos7715_parport *mos_parport = pp->private_data; mutex_unlock(&mos_parport->serial->disc_mutex); mos_parport->msg_pending = false; complete(&mos_parport->syncmsg_compl); } static void deferred_restore_writes(struct work_struct *work) { struct mos7715_parport *mos_parport; mos_parport = container_of(work, struct mos7715_parport, work); mutex_lock(&mos_parport->serial->disc_mutex); /* if device disconnected, game over */ if (mos_parport->serial->disconnected) goto done; write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR, mos_parport->shadowDCR); write_mos_reg(mos_parport->serial, dummy, MOS7720_ECR, mos_parport->shadowECR); done: mutex_unlock(&mos_parport->serial->disc_mutex); } static void parport_mos7715_write_data(struct parport *pp, unsigned char d) { struct mos7715_parport *mos_parport = pp->private_data; if (parport_prologue(pp) < 0) return; mos7715_change_mode(mos_parport, SPP); write_mos_reg(mos_parport->serial, dummy, MOS7720_DPR, (__u8)d); parport_epilogue(pp); } static unsigned char parport_mos7715_read_data(struct parport *pp) { struct mos7715_parport *mos_parport = pp->private_data; unsigned char d; if (parport_prologue(pp) < 0) return 0; read_mos_reg(mos_parport->serial, dummy, MOS7720_DPR, &d); parport_epilogue(pp); return d; } static void parport_mos7715_write_control(struct parport *pp, unsigned char d) { struct mos7715_parport *mos_parport = pp->private_data; __u8 data; if (parport_prologue(pp) < 0) return; data = ((__u8)d & 0x0f) | (mos_parport->shadowDCR & 0xf0); write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR, data); mos_parport->shadowDCR = data; parport_epilogue(pp); } static unsigned char parport_mos7715_read_control(struct parport *pp) { struct mos7715_parport *mos_parport; __u8 dcr; spin_lock(&release_lock); mos_parport = pp->private_data; if (unlikely(mos_parport == NULL)) { spin_unlock(&release_lock); return 0; } dcr = mos_parport->shadowDCR & 0x0f; spin_unlock(&release_lock); return dcr; } static unsigned char parport_mos7715_frob_control(struct parport *pp, unsigned char mask, unsigned char val) { struct mos7715_parport *mos_parport = pp->private_data; __u8 dcr; mask &= 0x0f; val &= 0x0f; if (parport_prologue(pp) < 0) return 0; mos_parport->shadowDCR = (mos_parport->shadowDCR & (~mask)) ^ val; write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR, mos_parport->shadowDCR); dcr = mos_parport->shadowDCR & 0x0f; parport_epilogue(pp); return dcr; } static unsigned char parport_mos7715_read_status(struct parport *pp) { unsigned char status; struct mos7715_parport *mos_parport; spin_lock(&release_lock); mos_parport = pp->private_data; if (unlikely(mos_parport == NULL)) { /* release called */ spin_unlock(&release_lock); return 0; } status = atomic_read(&mos_parport->shadowDSR) & 0xf8; spin_unlock(&release_lock); return status; } static void parport_mos7715_enable_irq(struct parport *pp) { } static void parport_mos7715_disable_irq(struct parport *pp) { } static void parport_mos7715_data_forward(struct parport *pp) { struct mos7715_parport *mos_parport = pp->private_data; if (parport_prologue(pp) < 0) return; mos7715_change_mode(mos_parport, PS2); mos_parport->shadowDCR &= ~0x20; write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR, mos_parport->shadowDCR); parport_epilogue(pp); } static void parport_mos7715_data_reverse(struct parport *pp) { struct mos7715_parport *mos_parport = pp->private_data; if (parport_prologue(pp) < 0) return; mos7715_change_mode(mos_parport, PS2); mos_parport->shadowDCR |= 0x20; write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR, mos_parport->shadowDCR); parport_epilogue(pp); } static void parport_mos7715_init_state(struct pardevice *dev, struct parport_state *s) { s->u.pc.ctr = DCR_INIT_VAL; s->u.pc.ecr = ECR_INIT_VAL; } /* N.B. Parport core code requires that this function not block */ static void parport_mos7715_save_state(struct parport *pp, struct parport_state *s) { struct mos7715_parport *mos_parport; spin_lock(&release_lock); mos_parport = pp->private_data; if (unlikely(mos_parport == NULL)) { /* release called */ spin_unlock(&release_lock); return; } s->u.pc.ctr = mos_parport->shadowDCR; s->u.pc.ecr = mos_parport->shadowECR; spin_unlock(&release_lock); } /* N.B. Parport core code requires that this function not block */ static void parport_mos7715_restore_state(struct parport *pp, struct parport_state *s) { struct mos7715_parport *mos_parport; spin_lock(&release_lock); mos_parport = pp->private_data; if (unlikely(mos_parport == NULL)) { /* release called */ spin_unlock(&release_lock); return; } mos_parport->shadowDCR = s->u.pc.ctr; mos_parport->shadowECR = s->u.pc.ecr; schedule_work(&mos_parport->work); spin_unlock(&release_lock); } static size_t parport_mos7715_write_compat(struct parport *pp, const void *buffer, size_t len, int flags) { int retval; struct mos7715_parport *mos_parport = pp->private_data; int actual_len; if (parport_prologue(pp) < 0) return 0; mos7715_change_mode(mos_parport, PPF); retval = usb_bulk_msg(mos_parport->serial->dev, usb_sndbulkpipe(mos_parport->serial->dev, 2), (void *)buffer, len, &actual_len, MOS_WDR_TIMEOUT); parport_epilogue(pp); if (retval) { dev_err(&mos_parport->serial->dev->dev, "mos7720: usb_bulk_msg() failed: %d\n", retval); return 0; } return actual_len; } static struct parport_operations parport_mos7715_ops = { .owner = THIS_MODULE, .write_data = parport_mos7715_write_data, .read_data = parport_mos7715_read_data, .write_control = parport_mos7715_write_control, .read_control = parport_mos7715_read_control, .frob_control = parport_mos7715_frob_control, .read_status = parport_mos7715_read_status, .enable_irq = parport_mos7715_enable_irq, .disable_irq = parport_mos7715_disable_irq, .data_forward = parport_mos7715_data_forward, .data_reverse = parport_mos7715_data_reverse, .init_state = parport_mos7715_init_state, .save_state = parport_mos7715_save_state, .restore_state = parport_mos7715_restore_state, .compat_write_data = parport_mos7715_write_compat, .nibble_read_data = parport_ieee1284_read_nibble, .byte_read_data = parport_ieee1284_read_byte, }; /* * Allocate and initialize parallel port control struct, initialize * the parallel port hardware device, and register with the parport subsystem. */ static int mos7715_parport_init(struct usb_serial *serial) { struct mos7715_parport *mos_parport; /* allocate and initialize parallel port control struct */ mos_parport = kzalloc(sizeof(struct mos7715_parport), GFP_KERNEL); if (!mos_parport) return -ENOMEM; mos_parport->msg_pending = false; kref_init(&mos_parport->ref_count); usb_set_serial_data(serial, mos_parport); /* hijack private pointer */ mos_parport->serial = serial; INIT_WORK(&mos_parport->work, deferred_restore_writes); init_completion(&mos_parport->syncmsg_compl); /* cycle parallel port reset bit */ write_mos_reg(mos_parport->serial, dummy, MOS7720_PP_REG, (__u8)0x80); write_mos_reg(mos_parport->serial, dummy, MOS7720_PP_REG, (__u8)0x00); /* initialize device registers */ mos_parport->shadowDCR = DCR_INIT_VAL; write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR, mos_parport->shadowDCR); mos_parport->shadowECR = ECR_INIT_VAL; write_mos_reg(mos_parport->serial, dummy, MOS7720_ECR, mos_parport->shadowECR); /* register with parport core */ mos_parport->pp = parport_register_port(0, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, &parport_mos7715_ops); if (mos_parport->pp == NULL) { dev_err(&serial->interface->dev, "Could not register parport\n"); kref_put(&mos_parport->ref_count, destroy_mos_parport); return -EIO; } mos_parport->pp->private_data = mos_parport; mos_parport->pp->modes = PARPORT_MODE_COMPAT | PARPORT_MODE_PCSPP; mos_parport->pp->dev = &serial->interface->dev; parport_announce_port(mos_parport->pp); return 0; } #endif /* CONFIG_USB_SERIAL_MOS7715_PARPORT */ /* * mos7720_interrupt_callback * this is the callback function for when we have received data on the * interrupt endpoint. */ static void mos7720_interrupt_callback(struct urb *urb) { int result; int length; int status = urb->status; struct device *dev = &urb->dev->dev; __u8 *data; __u8 sp1; __u8 sp2; switch (status) { case 0: /* success */ break; case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); goto exit; } length = urb->actual_length; data = urb->transfer_buffer; /* Moschip get 4 bytes * Byte 1 IIR Port 1 (port.number is 0) * Byte 2 IIR Port 2 (port.number is 1) * Byte 3 -------------- * Byte 4 FIFO status for both */ /* the above description is inverted * oneukum 2007-03-14 */ if (unlikely(length != 4)) { dev_dbg(dev, "Wrong data !!!\n"); return; } sp1 = data[3]; sp2 = data[2]; if ((sp1 | sp2) & 0x01) { /* No Interrupt Pending in both the ports */ dev_dbg(dev, "No Interrupt !!!\n"); } else { switch (sp1 & 0x0f) { case SERIAL_IIR_RLS: dev_dbg(dev, "Serial Port 1: Receiver status error or address bit detected in 9-bit mode\n"); break; case SERIAL_IIR_CTI: dev_dbg(dev, "Serial Port 1: Receiver time out\n"); break; case SERIAL_IIR_MS: /* dev_dbg(dev, "Serial Port 1: Modem status change\n"); */ break; } switch (sp2 & 0x0f) { case SERIAL_IIR_RLS: dev_dbg(dev, "Serial Port 2: Receiver status error or address bit detected in 9-bit mode\n"); break; case SERIAL_IIR_CTI: dev_dbg(dev, "Serial Port 2: Receiver time out\n"); break; case SERIAL_IIR_MS: /* dev_dbg(dev, "Serial Port 2: Modem status change\n"); */ break; } } exit: result = usb_submit_urb(urb, GFP_ATOMIC); if (result) dev_err(dev, "%s - Error %d submitting control urb\n", __func__, result); } /* * mos7715_interrupt_callback * this is the 7715's callback function for when we have received data on * the interrupt endpoint. */ static void mos7715_interrupt_callback(struct urb *urb) { int result; int length; int status = urb->status; struct device *dev = &urb->dev->dev; __u8 *data; __u8 iir; switch (status) { case 0: /* success */ break; case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: case -ENODEV: /* this urb is terminated, clean up */ dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); goto exit; } length = urb->actual_length; data = urb->transfer_buffer; /* Structure of data from 7715 device: * Byte 1: IIR serial Port * Byte 2: unused * Byte 2: DSR parallel port * Byte 4: FIFO status for both */ if (unlikely(length != 4)) { dev_dbg(dev, "Wrong data !!!\n"); return; } iir = data[0]; if (!(iir & 0x01)) { /* serial port interrupt pending */ switch (iir & 0x0f) { case SERIAL_IIR_RLS: dev_dbg(dev, "Serial Port: Receiver status error or address bit detected in 9-bit mode\n"); break; case SERIAL_IIR_CTI: dev_dbg(dev, "Serial Port: Receiver time out\n"); break; case SERIAL_IIR_MS: /* dev_dbg(dev, "Serial Port: Modem status change\n"); */ break; } } #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT { /* update local copy of DSR reg */ struct usb_serial_port *port = urb->context; struct mos7715_parport *mos_parport = port->serial->private; if (unlikely(mos_parport == NULL)) return; atomic_set(&mos_parport->shadowDSR, data[2]); } #endif exit: result = usb_submit_urb(urb, GFP_ATOMIC); if (result) dev_err(dev, "%s - Error %d submitting control urb\n", __func__, result); } /* * mos7720_bulk_in_callback * this is the callback function for when we have received data on the * bulk in endpoint. */ static void mos7720_bulk_in_callback(struct urb *urb) { int retval; unsigned char *data ; struct usb_serial_port *port; int status = urb->status; if (status) { dev_dbg(&urb->dev->dev, "nonzero read bulk status received: %d\n", status); return; } port = urb->context; dev_dbg(&port->dev, "Entering...%s\n", __func__); data = urb->transfer_buffer; if (urb->actual_length) { tty_insert_flip_string(&port->port, data, urb->actual_length); tty_flip_buffer_push(&port->port); } if (port->read_urb->status != -EINPROGRESS) { retval = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (retval) dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, retval = %d\n", retval); } } /* * mos7720_bulk_out_data_callback * this is the callback function for when we have finished sending serial * data on the bulk out endpoint. */ static void mos7720_bulk_out_data_callback(struct urb *urb) { struct moschip_port *mos7720_port; int status = urb->status; if (status) { dev_dbg(&urb->dev->dev, "nonzero write bulk status received:%d\n", status); return; } mos7720_port = urb->context; if (!mos7720_port) { dev_dbg(&urb->dev->dev, "NULL mos7720_port pointer\n"); return ; } if (mos7720_port->open) tty_port_tty_wakeup(&mos7720_port->port->port); } static int mos77xx_calc_num_ports(struct usb_serial *serial, struct usb_serial_endpoints *epds) { u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); if (product == MOSCHIP_DEVICE_ID_7715) { /* * The 7715 uses the first bulk in/out endpoint pair for the * parallel port, and the second for the serial port. We swap * the endpoint descriptors here so that the first and * only registered port structure uses the serial-port * endpoints. */ swap(epds->bulk_in[0], epds->bulk_in[1]); swap(epds->bulk_out[0], epds->bulk_out[1]); return 1; } return 2; } static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_serial *serial; struct urb *urb; struct moschip_port *mos7720_port; int response; int port_number; __u8 data; int allocated_urbs = 0; int j; serial = port->serial; mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) return -ENODEV; usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); /* Initialising the write urb pool */ for (j = 0; j < NUM_URBS; ++j) { urb = usb_alloc_urb(0, GFP_KERNEL); mos7720_port->write_urb_pool[j] = urb; if (!urb) continue; urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (!urb->transfer_buffer) { usb_free_urb(mos7720_port->write_urb_pool[j]); mos7720_port->write_urb_pool[j] = NULL; continue; } allocated_urbs++; } if (!allocated_urbs) return -ENOMEM; /* Initialize MCS7720 -- Write Init values to corresponding Registers * * Register Index * 0 : MOS7720_THR/MOS7720_RHR * 1 : MOS7720_IER * 2 : MOS7720_FCR * 3 : MOS7720_LCR * 4 : MOS7720_MCR * 5 : MOS7720_LSR * 6 : MOS7720_MSR * 7 : MOS7720_SPR * * 0x08 : SP1/2 Control Reg */ port_number = port->port_number; read_mos_reg(serial, port_number, MOS7720_LSR, &data); dev_dbg(&port->dev, "SS::%p LSR:%x\n", mos7720_port, data); write_mos_reg(serial, dummy, MOS7720_SP1_REG, 0x02); write_mos_reg(serial, dummy, MOS7720_SP2_REG, 0x02); write_mos_reg(serial, port_number, MOS7720_IER, 0x00); write_mos_reg(serial, port_number, MOS7720_FCR, 0x00); write_mos_reg(serial, port_number, MOS7720_FCR, 0xcf); mos7720_port->shadowLCR = 0x03; write_mos_reg(serial, port_number, MOS7720_LCR, mos7720_port->shadowLCR); mos7720_port->shadowMCR = 0x0b; write_mos_reg(serial, port_number, MOS7720_MCR, mos7720_port->shadowMCR); write_mos_reg(serial, port_number, MOS7720_SP_CONTROL_REG, 0x00); read_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, &data); data = data | (port->port_number + 1); write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, data); mos7720_port->shadowLCR = 0x83; write_mos_reg(serial, port_number, MOS7720_LCR, mos7720_port->shadowLCR); write_mos_reg(serial, port_number, MOS7720_THR, 0x0c); write_mos_reg(serial, port_number, MOS7720_IER, 0x00); mos7720_port->shadowLCR = 0x03; write_mos_reg(serial, port_number, MOS7720_LCR, mos7720_port->shadowLCR); write_mos_reg(serial, port_number, MOS7720_IER, 0x0c); response = usb_submit_urb(port->read_urb, GFP_KERNEL); if (response) dev_err(&port->dev, "%s - Error %d submitting read urb\n", __func__, response); /* initialize our port settings */ mos7720_port->shadowMCR = UART_MCR_OUT2; /* Must set to enable ints! */ /* send a open port command */ mos7720_port->open = 1; return 0; } /* * mos7720_chars_in_buffer * this function is called by the tty driver when it wants to know how many * bytes of data we currently have outstanding in the port (data that has * been written, but hasn't made it out the port yet) */ static unsigned int mos7720_chars_in_buffer(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port = usb_get_serial_port_data(port); int i; unsigned int chars = 0; for (i = 0; i < NUM_URBS; ++i) { if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status == -EINPROGRESS) chars += URB_TRANSFER_BUFFER_SIZE; } dev_dbg(&port->dev, "%s - returns %u\n", __func__, chars); return chars; } static void mos7720_close(struct usb_serial_port *port) { struct usb_serial *serial; struct moschip_port *mos7720_port; int j; serial = port->serial; mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) return; for (j = 0; j < NUM_URBS; ++j) usb_kill_urb(mos7720_port->write_urb_pool[j]); /* Freeing Write URBs */ for (j = 0; j < NUM_URBS; ++j) { if (mos7720_port->write_urb_pool[j]) { kfree(mos7720_port->write_urb_pool[j]->transfer_buffer); usb_free_urb(mos7720_port->write_urb_pool[j]); } } /* While closing port, shutdown all bulk read, write * * and interrupt read if they exists, otherwise nop */ usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); write_mos_reg(serial, port->port_number, MOS7720_MCR, 0x00); write_mos_reg(serial, port->port_number, MOS7720_IER, 0x00); mos7720_port->open = 0; } static void mos7720_break(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; unsigned char data; struct usb_serial *serial; struct moschip_port *mos7720_port; serial = port->serial; mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) return; if (break_state == -1) data = mos7720_port->shadowLCR | UART_LCR_SBC; else data = mos7720_port->shadowLCR & ~UART_LCR_SBC; mos7720_port->shadowLCR = data; write_mos_reg(serial, port->port_number, MOS7720_LCR, mos7720_port->shadowLCR); } /* * mos7720_write_room * this function is called by the tty driver when it wants to know how many * bytes of data we can accept for a specific port. */ static unsigned int mos7720_write_room(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port = usb_get_serial_port_data(port); unsigned int room = 0; int i; /* FIXME: Locking */ for (i = 0; i < NUM_URBS; ++i) { if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) room += URB_TRANSFER_BUFFER_SIZE; } dev_dbg(&port->dev, "%s - returns %u\n", __func__, room); return room; } static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *data, int count) { int status; int i; int bytes_sent = 0; int transfer_size; struct moschip_port *mos7720_port; struct usb_serial *serial; struct urb *urb; const unsigned char *current_position = data; serial = port->serial; mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) return -ENODEV; /* try to find a free urb in the list */ urb = NULL; for (i = 0; i < NUM_URBS; ++i) { if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) { urb = mos7720_port->write_urb_pool[i]; dev_dbg(&port->dev, "URB:%d\n", i); break; } } if (urb == NULL) { dev_dbg(&port->dev, "%s - no more free urbs\n", __func__); goto exit; } if (urb->transfer_buffer == NULL) { urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC); if (!urb->transfer_buffer) { bytes_sent = -ENOMEM; goto exit; } } transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE); memcpy(urb->transfer_buffer, current_position, transfer_size); usb_serial_debug_data(&port->dev, __func__, transfer_size, urb->transfer_buffer); /* fill urb with data and submit */ usb_fill_bulk_urb(urb, serial->dev, usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress), urb->transfer_buffer, transfer_size, mos7720_bulk_out_data_callback, mos7720_port); /* send it down the pipe */ status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { dev_err_console(port, "%s - usb_submit_urb(write bulk) failed " "with status = %d\n", __func__, status); bytes_sent = status; goto exit; } bytes_sent = transfer_size; exit: return bytes_sent; } static void mos7720_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port; int status; mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) return; if (!mos7720_port->open) { dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } /* if we are implementing XON/XOFF, send the stop character */ if (I_IXOFF(tty)) { unsigned char stop_char = STOP_CHAR(tty); status = mos7720_write(tty, port, &stop_char, 1); if (status <= 0) return; } /* if we are implementing RTS/CTS, toggle that line */ if (C_CRTSCTS(tty)) { mos7720_port->shadowMCR &= ~UART_MCR_RTS; write_mos_reg(port->serial, port->port_number, MOS7720_MCR, mos7720_port->shadowMCR); } } static void mos7720_unthrottle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port = usb_get_serial_port_data(port); int status; if (mos7720_port == NULL) return; if (!mos7720_port->open) { dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } /* if we are implementing XON/XOFF, send the start character */ if (I_IXOFF(tty)) { unsigned char start_char = START_CHAR(tty); status = mos7720_write(tty, port, &start_char, 1); if (status <= 0) return; } /* if we are implementing RTS/CTS, toggle that line */ if (C_CRTSCTS(tty)) { mos7720_port->shadowMCR |= UART_MCR_RTS; write_mos_reg(port->serial, port->port_number, MOS7720_MCR, mos7720_port->shadowMCR); } } /* FIXME: this function does not work */ static int set_higher_rates(struct moschip_port *mos7720_port, unsigned int baud) { struct usb_serial_port *port; struct usb_serial *serial; int port_number; enum mos_regs sp_reg; if (mos7720_port == NULL) return -EINVAL; port = mos7720_port->port; serial = port->serial; /*********************************************** * Init Sequence for higher rates ***********************************************/ dev_dbg(&port->dev, "Sending Setting Commands ..........\n"); port_number = port->port_number; write_mos_reg(serial, port_number, MOS7720_IER, 0x00); write_mos_reg(serial, port_number, MOS7720_FCR, 0x00); write_mos_reg(serial, port_number, MOS7720_FCR, 0xcf); mos7720_port->shadowMCR = 0x0b; write_mos_reg(serial, port_number, MOS7720_MCR, mos7720_port->shadowMCR); write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, 0x00); /*********************************************** * Set for higher rates * ***********************************************/ /* writing baud rate verbatum into uart clock field clearly not right */ if (port_number == 0) sp_reg = MOS7720_SP1_REG; else sp_reg = MOS7720_SP2_REG; write_mos_reg(serial, dummy, sp_reg, baud * 0x10); write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, 0x03); mos7720_port->shadowMCR = 0x2b; write_mos_reg(serial, port_number, MOS7720_MCR, mos7720_port->shadowMCR); /*********************************************** * Set DLL/DLM ***********************************************/ mos7720_port->shadowLCR = mos7720_port->shadowLCR | UART_LCR_DLAB; write_mos_reg(serial, port_number, MOS7720_LCR, mos7720_port->shadowLCR); write_mos_reg(serial, port_number, MOS7720_DLL, 0x01); write_mos_reg(serial, port_number, MOS7720_DLM, 0x00); mos7720_port->shadowLCR = mos7720_port->shadowLCR & ~UART_LCR_DLAB; write_mos_reg(serial, port_number, MOS7720_LCR, mos7720_port->shadowLCR); return 0; } /* baud rate information */ struct divisor_table_entry { __u32 baudrate; __u16 divisor; }; /* Define table of divisors for moschip 7720 hardware * * These assume a 3.6864MHz crystal, the standard /16, and * * MCR.7 = 0. */ static const struct divisor_table_entry divisor_table[] = { { 50, 2304}, { 110, 1047}, /* 2094.545455 => 230450 => .0217 % over */ { 134, 857}, /* 1713.011152 => 230398.5 => .00065% under */ { 150, 768}, { 300, 384}, { 600, 192}, { 1200, 96}, { 1800, 64}, { 2400, 48}, { 4800, 24}, { 7200, 16}, { 9600, 12}, { 19200, 6}, { 38400, 3}, { 57600, 2}, { 115200, 1}, }; /***************************************************************************** * calc_baud_rate_divisor * this function calculates the proper baud rate divisor for the specified * baud rate. *****************************************************************************/ static int calc_baud_rate_divisor(struct usb_serial_port *port, int baudrate, int *divisor) { int i; __u16 custom; __u16 round1; __u16 round; dev_dbg(&port->dev, "%s - %d\n", __func__, baudrate); for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { if (divisor_table[i].baudrate == baudrate) { *divisor = divisor_table[i].divisor; return 0; } } /* After trying for all the standard baud rates * * Try calculating the divisor for this baud rate */ if (baudrate > 75 && baudrate < 230400) { /* get the divisor */ custom = (__u16)(230400L / baudrate); /* Check for round off */ round1 = (__u16)(2304000L / baudrate); round = (__u16)(round1 - (custom * 10)); if (round > 4) custom++; *divisor = custom; dev_dbg(&port->dev, "Baud %d = %d\n", baudrate, custom); return 0; } dev_dbg(&port->dev, "Baud calculation Failed...\n"); return -EINVAL; } /* * send_cmd_write_baud_rate * this function sends the proper command to change the baud rate of the * specified port. */ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port, int baudrate) { struct usb_serial_port *port; struct usb_serial *serial; int divisor; int status; unsigned char number; if (mos7720_port == NULL) return -1; port = mos7720_port->port; serial = port->serial; number = port->port_number; dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudrate); /* Calculate the Divisor */ status = calc_baud_rate_divisor(port, baudrate, &divisor); if (status) { dev_err(&port->dev, "%s - bad baud rate\n", __func__); return status; } /* Enable access to divisor latch */ mos7720_port->shadowLCR = mos7720_port->shadowLCR | UART_LCR_DLAB; write_mos_reg(serial, number, MOS7720_LCR, mos7720_port->shadowLCR); /* Write the divisor */ write_mos_reg(serial, number, MOS7720_DLL, (__u8)(divisor & 0xff)); write_mos_reg(serial, number, MOS7720_DLM, (__u8)((divisor & 0xff00) >> 8)); /* Disable access to divisor latch */ mos7720_port->shadowLCR = mos7720_port->shadowLCR & ~UART_LCR_DLAB; write_mos_reg(serial, number, MOS7720_LCR, mos7720_port->shadowLCR); return status; } /* * change_port_settings * This routine is called to set the UART on the device to match * the specified new settings. */ static void change_port_settings(struct tty_struct *tty, struct moschip_port *mos7720_port, const struct ktermios *old_termios) { struct usb_serial_port *port; struct usb_serial *serial; int baud; unsigned cflag; __u8 lData; __u8 lParity; __u8 lStop; int status; int port_number; if (mos7720_port == NULL) return ; port = mos7720_port->port; serial = port->serial; port_number = port->port_number; if (!mos7720_port->open) { dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } lStop = 0x00; /* 1 stop bit */ lParity = 0x00; /* No parity */ cflag = tty->termios.c_cflag; lData = UART_LCR_WLEN(tty_get_char_size(cflag)); /* Change the Parity bit */ if (cflag & PARENB) { if (cflag & PARODD) { lParity = UART_LCR_PARITY; dev_dbg(&port->dev, "%s - parity = odd\n", __func__); } else { lParity = (UART_LCR_EPAR | UART_LCR_PARITY); dev_dbg(&port->dev, "%s - parity = even\n", __func__); } } else { dev_dbg(&port->dev, "%s - parity = none\n", __func__); } if (cflag & CMSPAR) lParity = lParity | 0x20; /* Change the Stop bit */ if (cflag & CSTOPB) { lStop = UART_LCR_STOP; dev_dbg(&port->dev, "%s - stop bits = 2\n", __func__); } else { lStop = 0x00; dev_dbg(&port->dev, "%s - stop bits = 1\n", __func__); } #define LCR_BITS_MASK 0x03 /* Mask for bits/char field */ #define LCR_STOP_MASK 0x04 /* Mask for stop bits field */ #define LCR_PAR_MASK 0x38 /* Mask for parity field */ /* Update the LCR with the correct value */ mos7720_port->shadowLCR &= ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); mos7720_port->shadowLCR |= (lData | lParity | lStop); /* Disable Interrupts */ write_mos_reg(serial, port_number, MOS7720_IER, 0x00); write_mos_reg(serial, port_number, MOS7720_FCR, 0x00); write_mos_reg(serial, port_number, MOS7720_FCR, 0xcf); /* Send the updated LCR value to the mos7720 */ write_mos_reg(serial, port_number, MOS7720_LCR, mos7720_port->shadowLCR); mos7720_port->shadowMCR = 0x0b; write_mos_reg(serial, port_number, MOS7720_MCR, mos7720_port->shadowMCR); /* set up the MCR register and send it to the mos7720 */ mos7720_port->shadowMCR = UART_MCR_OUT2; if (cflag & CBAUD) mos7720_port->shadowMCR |= (UART_MCR_DTR | UART_MCR_RTS); if (cflag & CRTSCTS) { mos7720_port->shadowMCR |= (UART_MCR_XONANY); /* To set hardware flow control to the specified * * serial port, in SP1/2_CONTROL_REG */ if (port_number) write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, 0x01); else write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, 0x02); } else mos7720_port->shadowMCR &= ~(UART_MCR_XONANY); write_mos_reg(serial, port_number, MOS7720_MCR, mos7720_port->shadowMCR); /* Determine divisor based on baud rate */ baud = tty_get_baud_rate(tty); if (!baud) { /* pick a default, any default... */ dev_dbg(&port->dev, "Picked default baud...\n"); baud = 9600; } if (baud >= 230400) { set_higher_rates(mos7720_port, baud); /* Enable Interrupts */ write_mos_reg(serial, port_number, MOS7720_IER, 0x0c); return; } dev_dbg(&port->dev, "%s - baud rate = %d\n", __func__, baud); status = send_cmd_write_baud_rate(mos7720_port, baud); /* FIXME: needs to write actual resulting baud back not just blindly do so */ if (cflag & CBAUD) tty_encode_baud_rate(tty, baud, baud); /* Enable Interrupts */ write_mos_reg(serial, port_number, MOS7720_IER, 0x0c); if (port->read_urb->status != -EINPROGRESS) { status = usb_submit_urb(port->read_urb, GFP_KERNEL); if (status) dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", status); } } /* * mos7720_set_termios * this function is called by the tty driver when it wants to change the * termios structure. */ static void mos7720_set_termios(struct tty_struct *tty, struct usb_serial_port *port, const struct ktermios *old_termios) { int status; struct moschip_port *mos7720_port; mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) return; if (!mos7720_port->open) { dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } /* change the port settings to the new ones specified */ change_port_settings(tty, mos7720_port, old_termios); if (port->read_urb->status != -EINPROGRESS) { status = usb_submit_urb(port->read_urb, GFP_KERNEL); if (status) dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", status); } } /* * get_lsr_info - get line status register info * * Purpose: Let user call ioctl() to get info when the UART physically * is emptied. On bus types like RS485, the transmitter must * release the bus after transmitting. This must be done when * the transmit shift register is empty, not be done when the * transmit holding register is empty. This functionality * allows an RS485 driver to be written in user space. */ static int get_lsr_info(struct tty_struct *tty, struct moschip_port *mos7720_port, unsigned int __user *value) { struct usb_serial_port *port = tty->driver_data; unsigned int result = 0; unsigned char data = 0; int port_number = port->port_number; int count; count = mos7720_chars_in_buffer(tty); if (count == 0) { read_mos_reg(port->serial, port_number, MOS7720_LSR, &data); if ((data & (UART_LSR_TEMT | UART_LSR_THRE)) == (UART_LSR_TEMT | UART_LSR_THRE)) { dev_dbg(&port->dev, "%s -- Empty\n", __func__); result = TIOCSER_TEMT; } } if (copy_to_user(value, &result, sizeof(int))) return -EFAULT; return 0; } static int mos7720_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port = usb_get_serial_port_data(port); unsigned int result = 0; unsigned int mcr ; unsigned int msr ; mcr = mos7720_port->shadowMCR; msr = mos7720_port->shadowMSR; result = ((mcr & UART_MCR_DTR) ? TIOCM_DTR : 0) /* 0x002 */ | ((mcr & UART_MCR_RTS) ? TIOCM_RTS : 0) /* 0x004 */ | ((msr & UART_MSR_CTS) ? TIOCM_CTS : 0) /* 0x020 */ | ((msr & UART_MSR_DCD) ? TIOCM_CAR : 0) /* 0x040 */ | ((msr & UART_MSR_RI) ? TIOCM_RI : 0) /* 0x080 */ | ((msr & UART_MSR_DSR) ? TIOCM_DSR : 0); /* 0x100 */ return result; } static int mos7720_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port = usb_get_serial_port_data(port); unsigned int mcr ; mcr = mos7720_port->shadowMCR; if (set & TIOCM_RTS) mcr |= UART_MCR_RTS; if (set & TIOCM_DTR) mcr |= UART_MCR_DTR; if (set & TIOCM_LOOP) mcr |= UART_MCR_LOOP; if (clear & TIOCM_RTS) mcr &= ~UART_MCR_RTS; if (clear & TIOCM_DTR) mcr &= ~UART_MCR_DTR; if (clear & TIOCM_LOOP) mcr &= ~UART_MCR_LOOP; mos7720_port->shadowMCR = mcr; write_mos_reg(port->serial, port->port_number, MOS7720_MCR, mos7720_port->shadowMCR); return 0; } static int mos7720_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port; mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) return -ENODEV; switch (cmd) { case TIOCSERGETLSR: dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__); return get_lsr_info(tty, mos7720_port, (unsigned int __user *)arg); } return -ENOIOCTLCMD; } static int mos7720_startup(struct usb_serial *serial) { struct usb_device *dev; char data; u16 product; int ret_val; product = le16_to_cpu(serial->dev->descriptor.idProduct); dev = serial->dev; if (product == MOSCHIP_DEVICE_ID_7715) { struct urb *urb = serial->port[0]->interrupt_in_urb; urb->complete = mos7715_interrupt_callback; #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT ret_val = mos7715_parport_init(serial); if (ret_val < 0) return ret_val; #endif } /* start the interrupt urb */ ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); if (ret_val) { dev_err(&dev->dev, "failed to submit interrupt urb: %d\n", ret_val); } /* LSR For Port 1 */ read_mos_reg(serial, 0, MOS7720_LSR, &data); dev_dbg(&dev->dev, "LSR:%x\n", data); return 0; } static void mos7720_release(struct usb_serial *serial) { usb_kill_urb(serial->port[0]->interrupt_in_urb); #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT /* close the parallel port */ if (le16_to_cpu(serial->dev->descriptor.idProduct) == MOSCHIP_DEVICE_ID_7715) { struct mos7715_parport *mos_parport = usb_get_serial_data(serial); /* prevent NULL ptr dereference in port callbacks */ spin_lock(&release_lock); mos_parport->pp->private_data = NULL; spin_unlock(&release_lock); /* wait for synchronous usb calls to return */ if (mos_parport->msg_pending) wait_for_completion_timeout(&mos_parport->syncmsg_compl, msecs_to_jiffies(MOS_WDR_TIMEOUT)); /* * If delayed work is currently scheduled, wait for it to * complete. This also implies barriers that ensure the * below serial clearing is not hoisted above the ->work. */ cancel_work_sync(&mos_parport->work); parport_remove_port(mos_parport->pp); usb_set_serial_data(serial, NULL); mos_parport->serial = NULL; parport_del_port(mos_parport->pp); kref_put(&mos_parport->ref_count, destroy_mos_parport); } #endif } static int mos7720_port_probe(struct usb_serial_port *port) { struct moschip_port *mos7720_port; mos7720_port = kzalloc(sizeof(*mos7720_port), GFP_KERNEL); if (!mos7720_port) return -ENOMEM; mos7720_port->port = port; usb_set_serial_port_data(port, mos7720_port); return 0; } static void mos7720_port_remove(struct usb_serial_port *port) { struct moschip_port *mos7720_port; mos7720_port = usb_get_serial_port_data(port); kfree(mos7720_port); } static struct usb_serial_driver moschip7720_2port_driver = { .driver = { .owner = THIS_MODULE, .name = "moschip7720", }, .description = "Moschip 2 port adapter", .id_table = id_table, .num_bulk_in = 2, .num_bulk_out = 2, .num_interrupt_in = 1, .calc_num_ports = mos77xx_calc_num_ports, .open = mos7720_open, .close = mos7720_close, .throttle = mos7720_throttle, .unthrottle = mos7720_unthrottle, .attach = mos7720_startup, .release = mos7720_release, .port_probe = mos7720_port_probe, .port_remove = mos7720_port_remove, .ioctl = mos7720_ioctl, .tiocmget = mos7720_tiocmget, .tiocmset = mos7720_tiocmset, .set_termios = mos7720_set_termios, .write = mos7720_write, .write_room = mos7720_write_room, .chars_in_buffer = mos7720_chars_in_buffer, .break_ctl = mos7720_break, .read_bulk_callback = mos7720_bulk_in_callback, .read_int_callback = mos7720_interrupt_callback, }; static struct usb_serial_driver * const serial_drivers[] = { &moschip7720_2port_driver, NULL }; module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1