Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Hans de Goede | 631 | 84.36% | 2 | 28.57% |
Heikki Krogerus | 112 | 14.97% | 3 | 42.86% |
Björn Andersson | 4 | 0.53% | 1 | 14.29% |
Uwe Kleine-König | 1 | 0.13% | 1 | 14.29% |
Total | 748 | 7 |
// SPDX-License-Identifier: GPL-2.0+ /* * Pericom PI3USB30532 Type-C cross switch / mux driver * * Copyright (c) 2017-2018 Hans de Goede <hdegoede@redhat.com> */ #include <linux/i2c.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/mutex.h> #include <linux/usb/typec_dp.h> #include <linux/usb/typec_mux.h> #define PI3USB30532_CONF 0x00 #define PI3USB30532_CONF_OPEN 0x00 #define PI3USB30532_CONF_SWAP 0x01 #define PI3USB30532_CONF_4LANE_DP 0x02 #define PI3USB30532_CONF_USB3 0x04 #define PI3USB30532_CONF_USB3_AND_2LANE_DP 0x06 struct pi3usb30532 { struct i2c_client *client; struct mutex lock; /* protects the cached conf register */ struct typec_switch_dev *sw; struct typec_mux_dev *mux; u8 conf; }; static int pi3usb30532_set_conf(struct pi3usb30532 *pi, u8 new_conf) { int ret = 0; if (pi->conf == new_conf) return 0; ret = i2c_smbus_write_byte_data(pi->client, PI3USB30532_CONF, new_conf); if (ret) { dev_err(&pi->client->dev, "Error writing conf: %d\n", ret); return ret; } pi->conf = new_conf; return 0; } static int pi3usb30532_sw_set(struct typec_switch_dev *sw, enum typec_orientation orientation) { struct pi3usb30532 *pi = typec_switch_get_drvdata(sw); u8 new_conf; int ret; mutex_lock(&pi->lock); new_conf = pi->conf; switch (orientation) { case TYPEC_ORIENTATION_NONE: new_conf = PI3USB30532_CONF_OPEN; break; case TYPEC_ORIENTATION_NORMAL: new_conf &= ~PI3USB30532_CONF_SWAP; break; case TYPEC_ORIENTATION_REVERSE: new_conf |= PI3USB30532_CONF_SWAP; break; } ret = pi3usb30532_set_conf(pi, new_conf); mutex_unlock(&pi->lock); return ret; } static int pi3usb30532_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state) { struct pi3usb30532 *pi = typec_mux_get_drvdata(mux); u8 new_conf; int ret; mutex_lock(&pi->lock); new_conf = pi->conf; switch (state->mode) { case TYPEC_STATE_SAFE: new_conf = (new_conf & PI3USB30532_CONF_SWAP) | PI3USB30532_CONF_OPEN; break; case TYPEC_STATE_USB: new_conf = (new_conf & PI3USB30532_CONF_SWAP) | PI3USB30532_CONF_USB3; break; case TYPEC_DP_STATE_C: case TYPEC_DP_STATE_E: new_conf = (new_conf & PI3USB30532_CONF_SWAP) | PI3USB30532_CONF_4LANE_DP; break; case TYPEC_DP_STATE_D: new_conf = (new_conf & PI3USB30532_CONF_SWAP) | PI3USB30532_CONF_USB3_AND_2LANE_DP; break; default: break; } ret = pi3usb30532_set_conf(pi, new_conf); mutex_unlock(&pi->lock); return ret; } static int pi3usb30532_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct typec_switch_desc sw_desc = { }; struct typec_mux_desc mux_desc = { }; struct pi3usb30532 *pi; int ret; pi = devm_kzalloc(dev, sizeof(*pi), GFP_KERNEL); if (!pi) return -ENOMEM; pi->client = client; mutex_init(&pi->lock); ret = i2c_smbus_read_byte_data(client, PI3USB30532_CONF); if (ret < 0) { dev_err(dev, "Error reading config register %d\n", ret); return ret; } pi->conf = ret; sw_desc.drvdata = pi; sw_desc.fwnode = dev->fwnode; sw_desc.set = pi3usb30532_sw_set; pi->sw = typec_switch_register(dev, &sw_desc); if (IS_ERR(pi->sw)) { dev_err(dev, "Error registering typec switch: %ld\n", PTR_ERR(pi->sw)); return PTR_ERR(pi->sw); } mux_desc.drvdata = pi; mux_desc.fwnode = dev->fwnode; mux_desc.set = pi3usb30532_mux_set; pi->mux = typec_mux_register(dev, &mux_desc); if (IS_ERR(pi->mux)) { typec_switch_unregister(pi->sw); dev_err(dev, "Error registering typec mux: %ld\n", PTR_ERR(pi->mux)); return PTR_ERR(pi->mux); } i2c_set_clientdata(client, pi); return 0; } static void pi3usb30532_remove(struct i2c_client *client) { struct pi3usb30532 *pi = i2c_get_clientdata(client); typec_mux_unregister(pi->mux); typec_switch_unregister(pi->sw); } static const struct i2c_device_id pi3usb30532_table[] = { { "pi3usb30532" }, { } }; MODULE_DEVICE_TABLE(i2c, pi3usb30532_table); static struct i2c_driver pi3usb30532_driver = { .driver = { .name = "pi3usb30532", }, .probe_new = pi3usb30532_probe, .remove = pi3usb30532_remove, .id_table = pi3usb30532_table, }; module_i2c_driver(pi3usb30532_driver); MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); MODULE_DESCRIPTION("Pericom PI3USB30532 Type-C mux driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1