| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Tejun Heo | 5713 | 93.17% | 89 | 65.44% |
| Jeff Garzik | 115 | 1.88% | 10 | 7.35% |
| Robert Hancock | 65 | 1.06% | 1 | 0.74% |
| Vivek Mahajan | 50 | 0.82% | 1 | 0.74% |
| Alexey Dobriyan | 20 | 0.33% | 2 | 1.47% |
| Al Viro | 18 | 0.29% | 1 | 0.74% |
| Joe Perches | 16 | 0.26% | 4 | 2.94% |
| Lee Jones | 15 | 0.24% | 1 | 0.74% |
| Bartlomiej Zolnierkiewicz | 13 | 0.21% | 1 | 0.74% |
| Jamie Clark | 11 | 0.18% | 1 | 0.74% |
| Albert Lee | 10 | 0.16% | 1 | 0.74% |
| Catalin Marinas | 8 | 0.13% | 1 | 0.74% |
| Dan Carpenter | 8 | 0.13% | 1 | 0.74% |
| Tim Small | 7 | 0.11% | 1 | 0.74% |
| Jiri Slaby | 7 | 0.11% | 1 | 0.74% |
| Erik Inge Bolsö | 6 | 0.10% | 1 | 0.74% |
| Colin Tuckley | 6 | 0.10% | 1 | 0.74% |
| Gwendal Grignou | 6 | 0.10% | 1 | 0.74% |
| Shaohua Li | 5 | 0.08% | 1 | 0.74% |
| Yang Hongyang | 4 | 0.07% | 1 | 0.74% |
| Quentin Lambert | 3 | 0.05% | 1 | 0.74% |
| Jens Axboe | 3 | 0.05% | 1 | 0.74% |
| Bart Van Assche | 3 | 0.05% | 2 | 1.47% |
| Hannes Reinecke | 3 | 0.05% | 1 | 0.74% |
| Avi Kivity | 3 | 0.05% | 1 | 0.74% |
| Thomas Gleixner | 2 | 0.03% | 1 | 0.74% |
| Christoph Hellwig | 2 | 0.03% | 1 | 0.74% |
| Colin Ian King | 2 | 0.03% | 1 | 0.74% |
| Alan Cox | 2 | 0.03% | 1 | 0.74% |
| Damien Le Moal | 2 | 0.03% | 1 | 0.74% |
| Niklas Svensson (Niklas Cassel) | 1 | 0.02% | 1 | 0.74% |
| Rusty Russell | 1 | 0.02% | 1 | 0.74% |
| Axel Lin | 1 | 0.02% | 1 | 0.74% |
| Jingoo Han | 1 | 0.02% | 1 | 0.74% |
| Total | 6132 | 136 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers * * Copyright 2005 Tejun Heo * * Based on preview driver from Silicon Image. */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/gfp.h> #include <linux/pci.h> #include <linux/blkdev.h> #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/dma-mapping.h> #include <linux/device.h> #include <scsi/scsi_host.h> #include <scsi/scsi_cmnd.h> #include <linux/libata.h> #define DRV_NAME "sata_sil24" #define DRV_VERSION "1.1" /* * Port request block (PRB) 32 bytes */ struct sil24_prb { __le16 ctrl; __le16 prot; __le32 rx_cnt; u8 fis[6 * 4]; }; /* * Scatter gather entry (SGE) 16 bytes */ struct sil24_sge { __le64 addr; __le32 cnt; __le32 flags; }; enum { SIL24_HOST_BAR = 0, SIL24_PORT_BAR = 2, /* sil24 fetches in chunks of 64bytes. The first block * contains the PRB and two SGEs. From the second block, it's * consisted of four SGEs and called SGT. Calculate the * number of SGTs that fit into one page. */ SIL24_PRB_SZ = sizeof(struct sil24_prb) + 2 * sizeof(struct sil24_sge), SIL24_MAX_SGT = (PAGE_SIZE - SIL24_PRB_SZ) / (4 * sizeof(struct sil24_sge)), /* This will give us one unused SGEs for ATA. This extra SGE * will be used to store CDB for ATAPI devices. */ SIL24_MAX_SGE = 4 * SIL24_MAX_SGT + 1, /* * Global controller registers (128 bytes @ BAR0) */ /* 32 bit regs */ HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */ HOST_CTRL = 0x40, HOST_IRQ_STAT = 0x44, HOST_PHY_CFG = 0x48, HOST_BIST_CTRL = 0x50, HOST_BIST_PTRN = 0x54, HOST_BIST_STAT = 0x58, HOST_MEM_BIST_STAT = 0x5c, HOST_FLASH_CMD = 0x70, /* 8 bit regs */ HOST_FLASH_DATA = 0x74, HOST_TRANSITION_DETECT = 0x75, HOST_GPIO_CTRL = 0x76, HOST_I2C_ADDR = 0x78, /* 32 bit */ HOST_I2C_DATA = 0x7c, HOST_I2C_XFER_CNT = 0x7e, HOST_I2C_CTRL = 0x7f, /* HOST_SLOT_STAT bits */ HOST_SSTAT_ATTN = (1 << 31), /* HOST_CTRL bits */ HOST_CTRL_M66EN = (1 << 16), /* M66EN PCI bus signal */ HOST_CTRL_TRDY = (1 << 17), /* latched PCI TRDY */ HOST_CTRL_STOP = (1 << 18), /* latched PCI STOP */ HOST_CTRL_DEVSEL = (1 << 19), /* latched PCI DEVSEL */ HOST_CTRL_REQ64 = (1 << 20), /* latched PCI REQ64 */ HOST_CTRL_GLOBAL_RST = (1 << 31), /* global reset */ /* * Port registers * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2) */ PORT_REGS_SIZE = 0x2000, PORT_LRAM = 0x0000, /* 31 LRAM slots and PMP regs */ PORT_LRAM_SLOT_SZ = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */ PORT_PMP = 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */ PORT_PMP_STATUS = 0x0000, /* port device status offset */ PORT_PMP_QACTIVE = 0x0004, /* port device QActive offset */ PORT_PMP_SIZE = 0x0008, /* 8 bytes per PMP */ /* 32 bit regs */ PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */ PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */ PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */ PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */ PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */ PORT_ACTIVATE_UPPER_ADDR= 0x101c, PORT_EXEC_FIFO = 0x1020, /* command execution fifo */ PORT_CMD_ERR = 0x1024, /* command error number */ PORT_FIS_CFG = 0x1028, PORT_FIFO_THRES = 0x102c, /* 16 bit regs */ PORT_DECODE_ERR_CNT = 0x1040, PORT_DECODE_ERR_THRESH = 0x1042, PORT_CRC_ERR_CNT = 0x1044, PORT_CRC_ERR_THRESH = 0x1046, PORT_HSHK_ERR_CNT = 0x1048, PORT_HSHK_ERR_THRESH = 0x104a, /* 32 bit regs */ PORT_PHY_CFG = 0x1050, PORT_SLOT_STAT = 0x1800, PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */ PORT_CONTEXT = 0x1e04, PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */ PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */ PORT_SCONTROL = 0x1f00, PORT_SSTATUS = 0x1f04, PORT_SERROR = 0x1f08, PORT_SACTIVE = 0x1f0c, /* PORT_CTRL_STAT bits */ PORT_CS_PORT_RST = (1 << 0), /* port reset */ PORT_CS_DEV_RST = (1 << 1), /* device reset */ PORT_CS_INIT = (1 << 2), /* port initialize */ PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */ PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */ PORT_CS_PMP_RESUME = (1 << 6), /* PMP resume */ PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */ PORT_CS_PMP_EN = (1 << 13), /* port multiplier enable */ PORT_CS_RDY = (1 << 31), /* port ready to accept commands */ /* PORT_IRQ_STAT/ENABLE_SET/CLR */ /* bits[11:0] are masked */ PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */ PORT_IRQ_ERROR = (1 << 1), /* command execution error */ PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */ PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */ PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */ PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */ PORT_IRQ_UNK_FIS = (1 << 6), /* unknown FIS received */ PORT_IRQ_DEV_XCHG = (1 << 7), /* device exchanged */ PORT_IRQ_8B10B = (1 << 8), /* 8b/10b decode error threshold */ PORT_IRQ_CRC = (1 << 9), /* CRC error threshold */ PORT_IRQ_HANDSHAKE = (1 << 10), /* handshake error threshold */ PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */ DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG | PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_NOTIFY, /* bits[27:16] are unmasked (raw) */ PORT_IRQ_RAW_SHIFT = 16, PORT_IRQ_MASKED_MASK = 0x7ff, PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT), /* ENABLE_SET/CLR specific, intr steering - 2 bit field */ PORT_IRQ_STEER_SHIFT = 30, PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT), /* PORT_CMD_ERR constants */ PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */ PORT_CERR_SDB = 2, /* Error bit in SDB FIS */ PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */ PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */ PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */ PORT_CERR_DIRECTION = 6, /* Data direction mismatch */ PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */ PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */ PORT_CERR_PKT_PROT = 11, /* DIR invalid in 1st PIO setup of ATAPI */ PORT_CERR_SGT_BOUNDARY = 16, /* PLD ecode 00 - SGT not on qword boundary */ PORT_CERR_SGT_TGTABRT = 17, /* PLD ecode 01 - target abort */ PORT_CERR_SGT_MSTABRT = 18, /* PLD ecode 10 - master abort */ PORT_CERR_SGT_PCIPERR = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */ PORT_CERR_CMD_BOUNDARY = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */ PORT_CERR_CMD_TGTABRT = 25, /* ctrl[15:13] 010 - target abort */ PORT_CERR_CMD_MSTABRT = 26, /* ctrl[15:13] 100 - master abort */ PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */ PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */ PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */ PORT_CERR_XFR_MSTABRT = 34, /* PSD ecode 10 - master abort */ PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */ PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */ /* bits of PRB control field */ PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */ PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */ PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */ PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */ PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */ /* PRB protocol field */ PRB_PROT_PACKET = (1 << 0), PRB_PROT_TCQ = (1 << 1), PRB_PROT_NCQ = (1 << 2), PRB_PROT_READ = (1 << 3), PRB_PROT_WRITE = (1 << 4), PRB_PROT_TRANSPARENT = (1 << 5), /* * Other constants */ SGE_TRM = (1 << 31), /* Last SGE in chain */ SGE_LNK = (1 << 30), /* linked list Points to SGT, not SGE */ SGE_DRD = (1 << 29), /* discard data read (/dev/null) data address ignored */ SIL24_MAX_CMDS = 31, /* board id */ BID_SIL3124 = 0, BID_SIL3132 = 1, BID_SIL3131 = 2, /* host flags */ SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA | ATA_FLAG_AN | ATA_FLAG_PMP, SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */ IRQ_STAT_4PORTS = 0xf, }; struct sil24_ata_block { struct sil24_prb prb; struct sil24_sge sge[SIL24_MAX_SGE]; }; struct sil24_atapi_block { struct sil24_prb prb; u8 cdb[16]; struct sil24_sge sge[SIL24_MAX_SGE]; }; union sil24_cmd_block { struct sil24_ata_block ata; struct sil24_atapi_block atapi; }; static const struct sil24_cerr_info { unsigned int err_mask, action; const char *desc; } sil24_cerr_db[] = { [0] = { AC_ERR_DEV, 0, "device error" }, [PORT_CERR_DEV] = { AC_ERR_DEV, 0, "device error via D2H FIS" }, [PORT_CERR_SDB] = { AC_ERR_DEV, 0, "device error via SDB FIS" }, [PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_RESET, "error in data FIS" }, [PORT_CERR_SEND] = { AC_ERR_ATA_BUS, ATA_EH_RESET, "failed to transmit command FIS" }, [PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_RESET, "protocol mismatch" }, [PORT_CERR_DIRECTION] = { AC_ERR_HSM, ATA_EH_RESET, "data direction mismatch" }, [PORT_CERR_UNDERRUN] = { AC_ERR_HSM, ATA_EH_RESET, "ran out of SGEs while writing" }, [PORT_CERR_OVERRUN] = { AC_ERR_HSM, ATA_EH_RESET, "ran out of SGEs while reading" }, [PORT_CERR_PKT_PROT] = { AC_ERR_HSM, ATA_EH_RESET, "invalid data direction for ATAPI CDB" }, [PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET, "SGT not on qword boundary" }, [PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET, "PCI target abort while fetching SGT" }, [PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET, "PCI master abort while fetching SGT" }, [PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET, "PCI parity error while fetching SGT" }, [PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET, "PRB not on qword boundary" }, [PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET, "PCI target abort while fetching PRB" }, [PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET, "PCI master abort while fetching PRB" }, [PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET, "PCI parity error while fetching PRB" }, [PORT_CERR_XFR_UNDEF] = { AC_ERR_HOST_BUS, ATA_EH_RESET, "undefined error while transferring data" }, [PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET, "PCI target abort while transferring data" }, [PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET, "PCI master abort while transferring data" }, [PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET, "PCI parity error while transferring data" }, [PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_RESET, "FIS received while sending service FIS" }, }; /* * ap->private_data * * The preview driver always returned 0 for status. We emulate it * here from the previous interrupt. */ struct sil24_port_priv { union sil24_cmd_block *cmd_block; /* 32 cmd blocks */ dma_addr_t cmd_block_dma; /* DMA base addr for them */ int do_port_rst; }; static void sil24_dev_config(struct ata_device *dev); static int sil24_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val); static int sil24_scr_write(struct ata_link *link, unsigned sc_reg, u32 val); static int sil24_qc_defer(struct ata_queued_cmd *qc); static enum ata_completion_errors sil24_qc_prep(struct ata_queued_cmd *qc); static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc); static void sil24_qc_fill_rtf(struct ata_queued_cmd *qc); static void sil24_pmp_attach(struct ata_port *ap); static void sil24_pmp_detach(struct ata_port *ap); static void sil24_freeze(struct ata_port *ap); static void sil24_thaw(struct ata_port *ap); static int sil24_softreset(struct ata_link *link, unsigned int *class, unsigned long deadline); static int sil24_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); static void sil24_error_handler(struct ata_port *ap); static void sil24_post_internal_cmd(struct ata_queued_cmd *qc); static int sil24_port_start(struct ata_port *ap); static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); #ifdef CONFIG_PM_SLEEP static int sil24_pci_device_resume(struct pci_dev *pdev); #endif #ifdef CONFIG_PM static int sil24_port_resume(struct ata_port *ap); #endif static const struct pci_device_id sil24_pci_tbl[] = { { PCI_VDEVICE(CMD, 0x3124), BID_SIL3124 }, { PCI_VDEVICE(INTEL, 0x3124), BID_SIL3124 }, { PCI_VDEVICE(CMD, 0x3132), BID_SIL3132 }, { PCI_VDEVICE(CMD, 0x0242), BID_SIL3132 }, { PCI_VDEVICE(CMD, 0x0244), BID_SIL3132 }, { PCI_VDEVICE(CMD, 0x3131), BID_SIL3131 }, { PCI_VDEVICE(CMD, 0x3531), BID_SIL3131 }, { } /* terminate list */ }; static struct pci_driver sil24_pci_driver = { .name = DRV_NAME, .id_table = sil24_pci_tbl, .probe = sil24_init_one, .remove = ata_pci_remove_one, #ifdef CONFIG_PM_SLEEP .suspend = ata_pci_device_suspend, .resume = sil24_pci_device_resume, #endif }; static const struct scsi_host_template sil24_sht = { __ATA_BASE_SHT(DRV_NAME), .can_queue = SIL24_MAX_CMDS, .sg_tablesize = SIL24_MAX_SGE, .dma_boundary = ATA_DMA_BOUNDARY, .tag_alloc_policy = BLK_TAG_ALLOC_FIFO, .sdev_groups = ata_ncq_sdev_groups, .change_queue_depth = ata_scsi_change_queue_depth, .slave_configure = ata_scsi_slave_config }; static struct ata_port_operations sil24_ops = { .inherits = &sata_pmp_port_ops, .qc_defer = sil24_qc_defer, .qc_prep = sil24_qc_prep, .qc_issue = sil24_qc_issue, .qc_fill_rtf = sil24_qc_fill_rtf, .freeze = sil24_freeze, .thaw = sil24_thaw, .softreset = sil24_softreset, .hardreset = sil24_hardreset, .pmp_softreset = sil24_softreset, .pmp_hardreset = sil24_pmp_hardreset, .error_handler = sil24_error_handler, .post_internal_cmd = sil24_post_internal_cmd, .dev_config = sil24_dev_config, .scr_read = sil24_scr_read, .scr_write = sil24_scr_write, .pmp_attach = sil24_pmp_attach, .pmp_detach = sil24_pmp_detach, .port_start = sil24_port_start, #ifdef CONFIG_PM .port_resume = sil24_port_resume, #endif }; static bool sata_sil24_msi; /* Disable MSI */ module_param_named(msi, sata_sil24_msi, bool, S_IRUGO); MODULE_PARM_DESC(msi, "Enable MSI (Default: false)"); /* * Use bits 30-31 of port_flags to encode available port numbers. * Current maxium is 4. */ #define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30) #define SIL24_FLAG2NPORTS(flag) ((((flag) >> 30) & 0x3) + 1) static const struct ata_port_info sil24_port_info[] = { /* sil_3124 */ { .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) | SIL24_FLAG_PCIX_IRQ_WOC, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil24_ops, }, /* sil_3132 */ { .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2), .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil24_ops, }, /* sil_3131/sil_3531 */ { .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1), .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, .port_ops = &sil24_ops, }, }; static int sil24_tag(int tag) { if (unlikely(ata_tag_internal(tag))) return 0; return tag; } static unsigned long sil24_port_offset(struct ata_port *ap) { return ap->port_no * PORT_REGS_SIZE; } static void __iomem *sil24_port_base(struct ata_port *ap) { return ap->host->iomap[SIL24_PORT_BAR] + sil24_port_offset(ap); } static void sil24_dev_config(struct ata_device *dev) { void __iomem *port = sil24_port_base(dev->link->ap); if (dev->cdb_len == 16) writel(PORT_CS_CDB16, port + PORT_CTRL_STAT); else writel(PORT_CS_CDB16, port + PORT_CTRL_CLR); } static void sil24_read_tf(struct ata_port *ap, int tag, struct ata_taskfile *tf) { void __iomem *port = sil24_port_base(ap); struct sil24_prb __iomem *prb; u8 fis[6 * 4]; prb = port + PORT_LRAM + sil24_tag(tag) * PORT_LRAM_SLOT_SZ; memcpy_fromio(fis, prb->fis, sizeof(fis)); ata_tf_from_fis(fis, tf); } static int sil24_scr_map[] = { [SCR_CONTROL] = 0, [SCR_STATUS] = 1, [SCR_ERROR] = 2, [SCR_ACTIVE] = 3, }; static int sil24_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val) { void __iomem *scr_addr = sil24_port_base(link->ap) + PORT_SCONTROL; if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { *val = readl(scr_addr + sil24_scr_map[sc_reg] * 4); return 0; } return -EINVAL; } static int sil24_scr_write(struct ata_link *link, unsigned sc_reg, u32 val) { void __iomem *scr_addr = sil24_port_base(link->ap) + PORT_SCONTROL; if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { writel(val, scr_addr + sil24_scr_map[sc_reg] * 4); return 0; } return -EINVAL; } static void sil24_config_port(struct ata_port *ap) { void __iomem *port = sil24_port_base(ap); /* configure IRQ WoC */ if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT); else writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); /* zero error counters. */ writew(0x8000, port + PORT_DECODE_ERR_THRESH); writew(0x8000, port + PORT_CRC_ERR_THRESH); writew(0x8000, port + PORT_HSHK_ERR_THRESH); writew(0x0000, port + PORT_DECODE_ERR_CNT); writew(0x0000, port + PORT_CRC_ERR_CNT); writew(0x0000, port + PORT_HSHK_ERR_CNT); /* always use 64bit activation */ writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); /* clear port multiplier enable and resume bits */ writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR); } static void sil24_config_pmp(struct ata_port *ap, int attached) { void __iomem *port = sil24_port_base(ap); if (attached) writel(PORT_CS_PMP_EN, port + PORT_CTRL_STAT); else writel(PORT_CS_PMP_EN, port + PORT_CTRL_CLR); } static void sil24_clear_pmp(struct ata_port *ap) { void __iomem *port = sil24_port_base(ap); int i; writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR); for (i = 0; i < SATA_PMP_MAX_PORTS; i++) { void __iomem *pmp_base = port + PORT_PMP + i * PORT_PMP_SIZE; writel(0, pmp_base + PORT_PMP_STATUS); writel(0, pmp_base + PORT_PMP_QACTIVE); } } static int sil24_init_port(struct ata_port *ap) { void __iomem *port = sil24_port_base(ap); struct sil24_port_priv *pp = ap->private_data; u32 tmp; /* clear PMP error status */ if (sata_pmp_attached(ap)) sil24_clear_pmp(ap); writel(PORT_CS_INIT, port + PORT_CTRL_STAT); ata_wait_register(ap, port + PORT_CTRL_STAT, PORT_CS_INIT, PORT_CS_INIT, 10, 100); tmp = ata_wait_register(ap, port + PORT_CTRL_STAT, PORT_CS_RDY, 0, 10, 100); if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) { pp->do_port_rst = 1; ap->link.eh_context.i.action |= ATA_EH_RESET; return -EIO; } return 0; } static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp, const struct ata_taskfile *tf, int is_cmd, u32 ctrl, unsigned long timeout_msec) { void __iomem *port = sil24_port_base(ap); struct sil24_port_priv *pp = ap->private_data; struct sil24_prb *prb = &pp->cmd_block[0].ata.prb; dma_addr_t paddr = pp->cmd_block_dma; u32 irq_enabled, irq_mask, irq_stat; int rc; prb->ctrl = cpu_to_le16(ctrl); ata_tf_to_fis(tf, pmp, is_cmd, prb->fis); /* temporarily plug completion and error interrupts */ irq_enabled = readl(port + PORT_IRQ_ENABLE_SET); writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR); /* * The barrier is required to ensure that writes to cmd_block reach * the memory before the write to PORT_CMD_ACTIVATE. */ wmb(); writel((u32)paddr, port + PORT_CMD_ACTIVATE); writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4); irq_mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT; irq_stat = ata_wait_register(ap, port + PORT_IRQ_STAT, irq_mask, 0x0, 10, timeout_msec); writel(irq_mask, port + PORT_IRQ_STAT); /* clear IRQs */ irq_stat >>= PORT_IRQ_RAW_SHIFT; if (irq_stat & PORT_IRQ_COMPLETE) rc = 0; else { /* force port into known state */ sil24_init_port(ap); if (irq_stat & PORT_IRQ_ERROR) rc = -EIO; else rc = -EBUSY; } /* restore IRQ enabled */ writel(irq_enabled, port + PORT_IRQ_ENABLE_SET); return rc; } static int sil24_softreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { struct ata_port *ap = link->ap; int pmp = sata_srst_pmp(link); unsigned long timeout_msec = 0; struct ata_taskfile tf; const char *reason; int rc; /* put the port into known state */ if (sil24_init_port(ap)) { reason = "port not ready"; goto err; } /* do SRST */ if (time_after(deadline, jiffies)) timeout_msec = jiffies_to_msecs(deadline - jiffies); ata_tf_init(link->device, &tf); /* doesn't really matter */ rc = sil24_exec_polled_cmd(ap, pmp, &tf, 0, PRB_CTRL_SRST, timeout_msec); if (rc == -EBUSY) { reason = "timeout"; goto err; } else if (rc) { reason = "SRST command error"; goto err; } sil24_read_tf(ap, 0, &tf); *class = ata_port_classify(ap, &tf); return 0; err: ata_link_err(link, "softreset failed (%s)\n", reason); return -EIO; } static int sil24_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { struct ata_port *ap = link->ap; void __iomem *port = sil24_port_base(ap); struct sil24_port_priv *pp = ap->private_data; int did_port_rst = 0; const char *reason; int tout_msec, rc; u32 tmp; retry: /* Sometimes, DEV_RST is not enough to recover the controller. * This happens often after PM DMA CS errata. */ if (pp->do_port_rst) { ata_port_warn(ap, "controller in dubious state, performing PORT_RST\n"); writel(PORT_CS_PORT_RST, port + PORT_CTRL_STAT); ata_msleep(ap, 10); writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); ata_wait_register(ap, port + PORT_CTRL_STAT, PORT_CS_RDY, 0, 10, 5000); /* restore port configuration */ sil24_config_port(ap); sil24_config_pmp(ap, ap->nr_pmp_links); pp->do_port_rst = 0; did_port_rst = 1; } /* sil24 does the right thing(tm) without any protection */ sata_set_spd(link); tout_msec = 100; if (ata_link_online(link)) tout_msec = 5000; writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); tmp = ata_wait_register(ap, port + PORT_CTRL_STAT, PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10, tout_msec); /* SStatus oscillates between zero and valid status after * DEV_RST, debounce it. */ rc = sata_link_debounce(link, sata_deb_timing_long, deadline); if (rc) { reason = "PHY debouncing failed"; goto err; } if (tmp & PORT_CS_DEV_RST) { if (ata_link_offline(link)) return 0; reason = "link not ready"; goto err; } /* Sil24 doesn't store signature FIS after hardreset, so we * can't wait for BSY to clear. Some devices take a long time * to get ready and those devices will choke if we don't wait * for BSY clearance here. Tell libata to perform follow-up * softreset. */ return -EAGAIN; err: if (!did_port_rst) { pp->do_port_rst = 1; goto retry; } ata_link_err(link, "hardreset failed (%s)\n", reason); return -EIO; } static inline void sil24_fill_sg(struct ata_queued_cmd *qc, struct sil24_sge *sge) { struct scatterlist *sg; struct sil24_sge *last_sge = NULL; unsigned int si; for_each_sg(qc->sg, sg, qc->n_elem, si) { sge->addr = cpu_to_le64(sg_dma_address(sg)); sge->cnt = cpu_to_le32(sg_dma_len(sg)); sge->flags = 0; last_sge = sge; sge++; } last_sge->flags = cpu_to_le32(SGE_TRM); } static int sil24_qc_defer(struct ata_queued_cmd *qc) { struct ata_link *link = qc->dev->link; struct ata_port *ap = link->ap; u8 prot = qc->tf.protocol; /* * There is a bug in the chip: * Port LRAM Causes the PRB/SGT Data to be Corrupted * If the host issues a read request for LRAM and SActive registers * while active commands are available in the port, PRB/SGT data in * the LRAM can become corrupted. This issue applies only when * reading from, but not writing to, the LRAM. * * Therefore, reading LRAM when there is no particular error [and * other commands may be outstanding] is prohibited. * * To avoid this bug there are two situations where a command must run * exclusive of any other commands on the port: * * - ATAPI commands which check the sense data * - Passthrough ATA commands which always have ATA_QCFLAG_RESULT_TF * set. * */ int is_excl = (ata_is_atapi(prot) || (qc->flags & ATA_QCFLAG_RESULT_TF)); if (unlikely(ap->excl_link)) { if (link == ap->excl_link) { if (ap->nr_active_links) return ATA_DEFER_PORT; qc->flags |= ATA_QCFLAG_CLEAR_EXCL; } else return ATA_DEFER_PORT; } else if (unlikely(is_excl)) { ap->excl_link = link; if (ap->nr_active_links) return ATA_DEFER_PORT; qc->flags |= ATA_QCFLAG_CLEAR_EXCL; } return ata_std_qc_defer(qc); } static enum ata_completion_errors sil24_qc_prep(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct sil24_port_priv *pp = ap->private_data; union sil24_cmd_block *cb; struct sil24_prb *prb; struct sil24_sge *sge; u16 ctrl = 0; cb = &pp->cmd_block[sil24_tag(qc->hw_tag)]; if (!ata_is_atapi(qc->tf.protocol)) { prb = &cb->ata.prb; sge = cb->ata.sge; if (ata_is_data(qc->tf.protocol)) { u16 prot = 0; ctrl = PRB_CTRL_PROTOCOL; if (ata_is_ncq(qc->tf.protocol)) prot |= PRB_PROT_NCQ; if (qc->tf.flags & ATA_TFLAG_WRITE) prot |= PRB_PROT_WRITE; else prot |= PRB_PROT_READ; prb->prot = cpu_to_le16(prot); } } else { prb = &cb->atapi.prb; sge = cb->atapi.sge; memset(cb->atapi.cdb, 0, sizeof(cb->atapi.cdb)); memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len); if (ata_is_data(qc->tf.protocol)) { if (qc->tf.flags & ATA_TFLAG_WRITE) ctrl = PRB_CTRL_PACKET_WRITE; else ctrl = PRB_CTRL_PACKET_READ; } } prb->ctrl = cpu_to_le16(ctrl); ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, prb->fis); if (qc->flags & ATA_QCFLAG_DMAMAP) sil24_fill_sg(qc, sge); return AC_ERR_OK; } static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct sil24_port_priv *pp = ap->private_data; void __iomem *port = sil24_port_base(ap); unsigned int tag = sil24_tag(qc->hw_tag); dma_addr_t paddr; void __iomem *activate; paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block); activate = port + PORT_CMD_ACTIVATE + tag * 8; /* * The barrier is required to ensure that writes to cmd_block reach * the memory before the write to PORT_CMD_ACTIVATE. */ wmb(); writel((u32)paddr, activate); writel((u64)paddr >> 32, activate + 4); return 0; } static void sil24_qc_fill_rtf(struct ata_queued_cmd *qc) { sil24_read_tf(qc->ap, qc->hw_tag, &qc->result_tf); } static void sil24_pmp_attach(struct ata_port *ap) { u32 *gscr = ap->link.device->gscr; sil24_config_pmp(ap, 1); sil24_init_port(ap); if (sata_pmp_gscr_vendor(gscr) == 0x11ab && sata_pmp_gscr_devid(gscr) == 0x4140) { ata_port_info(ap, "disabling NCQ support due to sil24-mv4140 quirk\n"); ap->flags &= ~ATA_FLAG_NCQ; } } static void sil24_pmp_detach(struct ata_port *ap) { sil24_init_port(ap); sil24_config_pmp(ap, 0); ap->flags |= ATA_FLAG_NCQ; } static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { int rc; rc = sil24_init_port(link->ap); if (rc) { ata_link_err(link, "hardreset failed (port not ready)\n"); return rc; } return sata_std_hardreset(link, class, deadline); } static void sil24_freeze(struct ata_port *ap) { void __iomem *port = sil24_port_base(ap); /* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear * PORT_IRQ_ENABLE instead. */ writel(0xffff, port + PORT_IRQ_ENABLE_CLR); } static void sil24_thaw(struct ata_port *ap) { void __iomem *port = sil24_port_base(ap); u32 tmp; /* clear IRQ */ tmp = readl(port + PORT_IRQ_STAT); writel(tmp, port + PORT_IRQ_STAT); /* turn IRQ back on */ writel(DEF_PORT_IRQ, port + PORT_IRQ_ENABLE_SET); } static void sil24_error_intr(struct ata_port *ap) { void __iomem *port = sil24_port_base(ap); struct sil24_port_priv *pp = ap->private_data; struct ata_queued_cmd *qc = NULL; struct ata_link *link; struct ata_eh_info *ehi; int abort = 0, freeze = 0; u32 irq_stat; /* on error, we need to clear IRQ explicitly */ irq_stat = readl(port + PORT_IRQ_STAT); writel(irq_stat, port + PORT_IRQ_STAT); /* first, analyze and record host port events */ link = &ap->link; ehi = &link->eh_info; ata_ehi_clear_desc(ehi); ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat); if (irq_stat & PORT_IRQ_SDB_NOTIFY) { ata_ehi_push_desc(ehi, "SDB notify"); sata_async_notification(ap); } if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) { ata_ehi_hotplugged(ehi); ata_ehi_push_desc(ehi, "%s", irq_stat & PORT_IRQ_PHYRDY_CHG ? "PHY RDY changed" : "device exchanged"); freeze = 1; } if (irq_stat & PORT_IRQ_UNK_FIS) { ehi->err_mask |= AC_ERR_HSM; ehi->action |= ATA_EH_RESET; ata_ehi_push_desc(ehi, "unknown FIS"); freeze = 1; } /* deal with command error */ if (irq_stat & PORT_IRQ_ERROR) { const struct sil24_cerr_info *ci = NULL; unsigned int err_mask = 0, action = 0; u32 context, cerr; int pmp; abort = 1; /* DMA Context Switch Failure in Port Multiplier Mode * errata. If we have active commands to 3 or more * devices, any error condition on active devices can * corrupt DMA context switching. */ if (ap->nr_active_links >= 3) { ehi->err_mask |= AC_ERR_OTHER; ehi->action |= ATA_EH_RESET; ata_ehi_push_desc(ehi, "PMP DMA CS errata"); pp->do_port_rst = 1; freeze = 1; } /* find out the offending link and qc */ if (sata_pmp_attached(ap)) { context = readl(port + PORT_CONTEXT); pmp = (context >> 5) & 0xf; if (pmp < ap->nr_pmp_links) { link = &ap->pmp_link[pmp]; ehi = &link->eh_info; qc = ata_qc_from_tag(ap, link->active_tag); ata_ehi_clear_desc(ehi); ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat); } else { err_mask |= AC_ERR_HSM; action |= ATA_EH_RESET; freeze = 1; } } else qc = ata_qc_from_tag(ap, link->active_tag); /* analyze CMD_ERR */ cerr = readl(port + PORT_CMD_ERR); if (cerr < ARRAY_SIZE(sil24_cerr_db)) ci = &sil24_cerr_db[cerr]; if (ci && ci->desc) { err_mask |= ci->err_mask; action |= ci->action; if (action & ATA_EH_RESET) freeze = 1; ata_ehi_push_desc(ehi, "%s", ci->desc); } else { err_mask |= AC_ERR_OTHER; action |= ATA_EH_RESET; freeze = 1; ata_ehi_push_desc(ehi, "unknown command error %d", cerr); } /* record error info */ if (qc) qc->err_mask |= err_mask; else ehi->err_mask |= err_mask; ehi->action |= action; /* if PMP, resume */ if (sata_pmp_attached(ap)) writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_STAT); } /* freeze or abort */ if (freeze) ata_port_freeze(ap); else if (abort) { if (qc) ata_link_abort(qc->dev->link); else ata_port_abort(ap); } } static inline void sil24_host_intr(struct ata_port *ap) { void __iomem *port = sil24_port_base(ap); u32 slot_stat, qc_active; int rc; /* If PCIX_IRQ_WOC, there's an inherent race window between * clearing IRQ pending status and reading PORT_SLOT_STAT * which may cause spurious interrupts afterwards. This is * unavoidable and much better than losing interrupts which * happens if IRQ pending is cleared after reading * PORT_SLOT_STAT. */ if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT); slot_stat = readl(port + PORT_SLOT_STAT); if (unlikely(slot_stat & HOST_SSTAT_ATTN)) { sil24_error_intr(ap); return; } qc_active = slot_stat & ~HOST_SSTAT_ATTN; rc = ata_qc_complete_multiple(ap, qc_active); if (rc > 0) return; if (rc < 0) { struct ata_eh_info *ehi = &ap->link.eh_info; ehi->err_mask |= AC_ERR_HSM; ehi->action |= ATA_EH_RESET; ata_port_freeze(ap); return; } /* spurious interrupts are expected if PCIX_IRQ_WOC */ if (!(ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) && ata_ratelimit()) ata_port_info(ap, "spurious interrupt (slot_stat 0x%x active_tag %d sactive 0x%x)\n", slot_stat, ap->link.active_tag, ap->link.sactive); } static irqreturn_t sil24_interrupt(int irq, void *dev_instance) { struct ata_host *host = dev_instance; void __iomem *host_base = host->iomap[SIL24_HOST_BAR]; unsigned handled = 0; u32 status; int i; status = readl(host_base + HOST_IRQ_STAT); if (status == 0xffffffff) { dev_err(host->dev, "IRQ status == 0xffffffff, " "PCI fault or device removal?\n"); goto out; } if (!(status & IRQ_STAT_4PORTS)) goto out; spin_lock(&host->lock); for (i = 0; i < host->n_ports; i++) if (status & (1 << i)) { sil24_host_intr(host->ports[i]); handled++; } spin_unlock(&host->lock); out: return IRQ_RETVAL(handled); } static void sil24_error_handler(struct ata_port *ap) { struct sil24_port_priv *pp = ap->private_data; if (sil24_init_port(ap)) ata_eh_freeze_port(ap); sata_pmp_error_handler(ap); pp->do_port_rst = 0; } static void sil24_post_internal_cmd(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; /* make DMA engine forget about the failed command */ if ((qc->flags & ATA_QCFLAG_EH) && sil24_init_port(ap)) ata_eh_freeze_port(ap); } static int sil24_port_start(struct ata_port *ap) { struct device *dev = ap->host->dev; struct sil24_port_priv *pp; union sil24_cmd_block *cb; size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS; dma_addr_t cb_dma; pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); if (!pp) return -ENOMEM; cb = dmam_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL); if (!cb) return -ENOMEM; pp->cmd_block = cb; pp->cmd_block_dma = cb_dma; ap->private_data = pp; ata_port_pbar_desc(ap, SIL24_HOST_BAR, -1, "host"); ata_port_pbar_desc(ap, SIL24_PORT_BAR, sil24_port_offset(ap), "port"); return 0; } static void sil24_init_controller(struct ata_host *host) { void __iomem *host_base = host->iomap[SIL24_HOST_BAR]; u32 tmp; int i; /* GPIO off */ writel(0, host_base + HOST_FLASH_CMD); /* clear global reset & mask interrupts during initialization */ writel(0, host_base + HOST_CTRL); /* init ports */ for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; void __iomem *port = sil24_port_base(ap); /* Initial PHY setting */ writel(0x20c, port + PORT_PHY_CFG); /* Clear port RST */ tmp = readl(port + PORT_CTRL_STAT); if (tmp & PORT_CS_PORT_RST) { writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); tmp = ata_wait_register(NULL, port + PORT_CTRL_STAT, PORT_CS_PORT_RST, PORT_CS_PORT_RST, 10, 100); if (tmp & PORT_CS_PORT_RST) dev_err(host->dev, "failed to clear port RST\n"); } /* configure port */ sil24_config_port(ap); } /* Turn on interrupts */ writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL); } static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { extern int __MARKER__sil24_cmd_block_is_sized_wrongly; struct ata_port_info pi = sil24_port_info[ent->driver_data]; const struct ata_port_info *ppi[] = { &pi, NULL }; void __iomem * const *iomap; struct ata_host *host; int rc; u32 tmp; /* cause link error if sil24_cmd_block is sized wrongly */ if (sizeof(union sil24_cmd_block) != PAGE_SIZE) __MARKER__sil24_cmd_block_is_sized_wrongly = 1; ata_print_version_once(&pdev->dev, DRV_VERSION); /* acquire resources */ rc = pcim_enable_device(pdev); if (rc) return rc; rc = pcim_iomap_regions(pdev, (1 << SIL24_HOST_BAR) | (1 << SIL24_PORT_BAR), DRV_NAME); if (rc) return rc; iomap = pcim_iomap_table(pdev); /* apply workaround for completion IRQ loss on PCI-X errata */ if (pi.flags & SIL24_FLAG_PCIX_IRQ_WOC) { tmp = readl(iomap[SIL24_HOST_BAR] + HOST_CTRL); if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL)) dev_info(&pdev->dev, "Applying completion IRQ loss on PCI-X errata fix\n"); else pi.flags &= ~SIL24_FLAG_PCIX_IRQ_WOC; } /* allocate and fill host */ host = ata_host_alloc_pinfo(&pdev->dev, ppi, SIL24_FLAG2NPORTS(ppi[0]->flags)); if (!host) return -ENOMEM; host->iomap = iomap; /* configure and activate the device */ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); if (rc) { dev_err(&pdev->dev, "DMA enable failed\n"); return rc; } /* Set max read request size to 4096. This slightly increases * write throughput for pci-e variants. */ pcie_set_readrq(pdev, 4096); sil24_init_controller(host); if (sata_sil24_msi && !pci_enable_msi(pdev)) { dev_info(&pdev->dev, "Using MSI\n"); pci_intx(pdev, 0); } pci_set_master(pdev); return ata_host_activate(host, pdev->irq, sil24_interrupt, IRQF_SHARED, &sil24_sht); } #ifdef CONFIG_PM_SLEEP static int sil24_pci_device_resume(struct pci_dev *pdev) { struct ata_host *host = pci_get_drvdata(pdev); void __iomem *host_base = host->iomap[SIL24_HOST_BAR]; int rc; rc = ata_pci_device_do_resume(pdev); if (rc) return rc; if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) writel(HOST_CTRL_GLOBAL_RST, host_base + HOST_CTRL); sil24_init_controller(host); ata_host_resume(host); return 0; } #endif #ifdef CONFIG_PM static int sil24_port_resume(struct ata_port *ap) { sil24_config_pmp(ap, ap->nr_pmp_links); return 0; } #endif module_pci_driver(sil24_pci_driver); MODULE_AUTHOR("Tejun Heo"); MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, sil24_pci_tbl);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1