| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Sean Wang | 4249 | 99.04% | 13 | 65.00% |
| Dinghao Liu | 17 | 0.40% | 1 | 5.00% |
| Dan Carpenter | 10 | 0.23% | 2 | 10.00% |
| Chuhong Yuan | 9 | 0.21% | 1 | 5.00% |
| Krzysztof Kozlowski | 3 | 0.07% | 1 | 5.00% |
| Zijun Hu | 1 | 0.02% | 1 | 5.00% |
| Qilong Zhang | 1 | 0.02% | 1 | 5.00% |
| Total | 4290 | 20 |
// SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2018 MediaTek Inc. /* * Bluetooth support for MediaTek serial devices * * Author: Sean Wang <sean.wang@mediatek.com> * */ #include <asm/unaligned.h> #include <linux/atomic.h> #include <linux/clk.h> #include <linux/firmware.h> #include <linux/gpio/consumer.h> #include <linux/iopoll.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/pinctrl/consumer.h> #include <linux/pm_runtime.h> #include <linux/regulator/consumer.h> #include <linux/serdev.h> #include <linux/skbuff.h> #include <net/bluetooth/bluetooth.h> #include <net/bluetooth/hci_core.h> #include "h4_recv.h" #include "btmtk.h" #define VERSION "0.2" #define MTK_STP_TLR_SIZE 2 #define BTMTKUART_TX_STATE_ACTIVE 1 #define BTMTKUART_TX_STATE_WAKEUP 2 #define BTMTKUART_TX_WAIT_VND_EVT 3 #define BTMTKUART_REQUIRED_WAKEUP 4 #define BTMTKUART_FLAG_STANDALONE_HW BIT(0) struct mtk_stp_hdr { u8 prefix; __be16 dlen; u8 cs; } __packed; struct btmtkuart_data { unsigned int flags; const char *fwname; }; struct btmtkuart_dev { struct hci_dev *hdev; struct serdev_device *serdev; struct clk *clk; struct clk *osc; struct regulator *vcc; struct gpio_desc *reset; struct gpio_desc *boot; struct pinctrl *pinctrl; struct pinctrl_state *pins_runtime; struct pinctrl_state *pins_boot; speed_t desired_speed; speed_t curr_speed; struct work_struct tx_work; unsigned long tx_state; struct sk_buff_head txq; struct sk_buff *rx_skb; struct sk_buff *evt_skb; u8 stp_pad[6]; u8 stp_cursor; u16 stp_dlen; const struct btmtkuart_data *data; }; #define btmtkuart_is_standalone(bdev) \ ((bdev)->data->flags & BTMTKUART_FLAG_STANDALONE_HW) #define btmtkuart_is_builtin_soc(bdev) \ !((bdev)->data->flags & BTMTKUART_FLAG_STANDALONE_HW) static int mtk_hci_wmt_sync(struct hci_dev *hdev, struct btmtk_hci_wmt_params *wmt_params) { struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc; u32 hlen, status = BTMTK_WMT_INVALID; struct btmtk_hci_wmt_evt *wmt_evt; struct btmtk_hci_wmt_cmd *wc; struct btmtk_wmt_hdr *hdr; int err; /* Send the WMT command and wait until the WMT event returns */ hlen = sizeof(*hdr) + wmt_params->dlen; if (hlen > 255) { err = -EINVAL; goto err_free_skb; } wc = kzalloc(hlen, GFP_KERNEL); if (!wc) { err = -ENOMEM; goto err_free_skb; } hdr = &wc->hdr; hdr->dir = 1; hdr->op = wmt_params->op; hdr->dlen = cpu_to_le16(wmt_params->dlen + 1); hdr->flag = wmt_params->flag; memcpy(wc->data, wmt_params->data, wmt_params->dlen); set_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state); err = __hci_cmd_send(hdev, 0xfc6f, hlen, wc); if (err < 0) { clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state); goto err_free_wc; } /* The vendor specific WMT commands are all answered by a vendor * specific event and will not have the Command Status or Command * Complete as with usual HCI command flow control. * * After sending the command, wait for BTMTKUART_TX_WAIT_VND_EVT * state to be cleared. The driver specific event receive routine * will clear that state and with that indicate completion of the * WMT command. */ err = wait_on_bit_timeout(&bdev->tx_state, BTMTKUART_TX_WAIT_VND_EVT, TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT); if (err == -EINTR) { bt_dev_err(hdev, "Execution of wmt command interrupted"); clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state); goto err_free_wc; } if (err) { bt_dev_err(hdev, "Execution of wmt command timed out"); clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state); err = -ETIMEDOUT; goto err_free_wc; } /* Parse and handle the return WMT event */ wmt_evt = (struct btmtk_hci_wmt_evt *)bdev->evt_skb->data; if (wmt_evt->whdr.op != hdr->op) { bt_dev_err(hdev, "Wrong op received %d expected %d", wmt_evt->whdr.op, hdr->op); err = -EIO; goto err_free_wc; } switch (wmt_evt->whdr.op) { case BTMTK_WMT_SEMAPHORE: if (wmt_evt->whdr.flag == 2) status = BTMTK_WMT_PATCH_UNDONE; else status = BTMTK_WMT_PATCH_DONE; break; case BTMTK_WMT_FUNC_CTRL: wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt; if (be16_to_cpu(wmt_evt_funcc->status) == 0x404) status = BTMTK_WMT_ON_DONE; else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420) status = BTMTK_WMT_ON_PROGRESS; else status = BTMTK_WMT_ON_UNDONE; break; } if (wmt_params->status) *wmt_params->status = status; err_free_wc: kfree(wc); err_free_skb: kfree_skb(bdev->evt_skb); bdev->evt_skb = NULL; return err; } static int btmtkuart_recv_event(struct hci_dev *hdev, struct sk_buff *skb) { struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); struct hci_event_hdr *hdr = (void *)skb->data; int err; /* When someone waits for the WMT event, the skb is being cloned * and being processed the events from there then. */ if (test_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state)) { bdev->evt_skb = skb_clone(skb, GFP_KERNEL); if (!bdev->evt_skb) { err = -ENOMEM; goto err_out; } } err = hci_recv_frame(hdev, skb); if (err < 0) goto err_free_skb; if (hdr->evt == HCI_EV_WMT) { if (test_and_clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state)) { /* Barrier to sync with other CPUs */ smp_mb__after_atomic(); wake_up_bit(&bdev->tx_state, BTMTKUART_TX_WAIT_VND_EVT); } } return 0; err_free_skb: kfree_skb(bdev->evt_skb); bdev->evt_skb = NULL; err_out: return err; } static const struct h4_recv_pkt mtk_recv_pkts[] = { { H4_RECV_ACL, .recv = hci_recv_frame }, { H4_RECV_SCO, .recv = hci_recv_frame }, { H4_RECV_EVENT, .recv = btmtkuart_recv_event }, }; static void btmtkuart_tx_work(struct work_struct *work) { struct btmtkuart_dev *bdev = container_of(work, struct btmtkuart_dev, tx_work); struct serdev_device *serdev = bdev->serdev; struct hci_dev *hdev = bdev->hdev; while (1) { clear_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state); while (1) { struct sk_buff *skb = skb_dequeue(&bdev->txq); int len; if (!skb) break; len = serdev_device_write_buf(serdev, skb->data, skb->len); hdev->stat.byte_tx += len; skb_pull(skb, len); if (skb->len > 0) { skb_queue_head(&bdev->txq, skb); break; } switch (hci_skb_pkt_type(skb)) { case HCI_COMMAND_PKT: hdev->stat.cmd_tx++; break; case HCI_ACLDATA_PKT: hdev->stat.acl_tx++; break; case HCI_SCODATA_PKT: hdev->stat.sco_tx++; break; } kfree_skb(skb); } if (!test_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state)) break; } clear_bit(BTMTKUART_TX_STATE_ACTIVE, &bdev->tx_state); } static void btmtkuart_tx_wakeup(struct btmtkuart_dev *bdev) { if (test_and_set_bit(BTMTKUART_TX_STATE_ACTIVE, &bdev->tx_state)) set_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state); schedule_work(&bdev->tx_work); } static const unsigned char * mtk_stp_split(struct btmtkuart_dev *bdev, const unsigned char *data, int count, int *sz_h4) { struct mtk_stp_hdr *shdr; /* The cursor is reset when all the data of STP is consumed out */ if (!bdev->stp_dlen && bdev->stp_cursor >= 6) bdev->stp_cursor = 0; /* Filling pad until all STP info is obtained */ while (bdev->stp_cursor < 6 && count > 0) { bdev->stp_pad[bdev->stp_cursor] = *data; bdev->stp_cursor++; data++; count--; } /* Retrieve STP info and have a sanity check */ if (!bdev->stp_dlen && bdev->stp_cursor >= 6) { shdr = (struct mtk_stp_hdr *)&bdev->stp_pad[2]; bdev->stp_dlen = be16_to_cpu(shdr->dlen) & 0x0fff; /* Resync STP when unexpected data is being read */ if (shdr->prefix != 0x80 || bdev->stp_dlen > 2048) { bt_dev_err(bdev->hdev, "stp format unexpect (%d, %d)", shdr->prefix, bdev->stp_dlen); bdev->stp_cursor = 2; bdev->stp_dlen = 0; } } /* Directly quit when there's no data found for H4 can process */ if (count <= 0) return NULL; /* Tranlate to how much the size of data H4 can handle so far */ *sz_h4 = min_t(int, count, bdev->stp_dlen); /* Update the remaining size of STP packet */ bdev->stp_dlen -= *sz_h4; /* Data points to STP payload which can be handled by H4 */ return data; } static int btmtkuart_recv(struct hci_dev *hdev, const u8 *data, size_t count) { struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); const unsigned char *p_left = data, *p_h4; int sz_left = count, sz_h4, adv; int err; while (sz_left > 0) { /* The serial data received from MT7622 BT controller is * at all time padded around with the STP header and tailer. * * A full STP packet is looking like * ----------------------------------- * | STP header | H:4 | STP tailer | * ----------------------------------- * but it doesn't guarantee to contain a full H:4 packet which * means that it's possible for multiple STP packets forms a * full H:4 packet that means extra STP header + length doesn't * indicate a full H:4 frame, things can fragment. Whose length * recorded in STP header just shows up the most length the * H:4 engine can handle currently. */ p_h4 = mtk_stp_split(bdev, p_left, sz_left, &sz_h4); if (!p_h4) break; adv = p_h4 - p_left; sz_left -= adv; p_left += adv; bdev->rx_skb = h4_recv_buf(bdev->hdev, bdev->rx_skb, p_h4, sz_h4, mtk_recv_pkts, ARRAY_SIZE(mtk_recv_pkts)); if (IS_ERR(bdev->rx_skb)) { err = PTR_ERR(bdev->rx_skb); bt_dev_err(bdev->hdev, "Frame reassembly failed (%d)", err); bdev->rx_skb = NULL; return err; } sz_left -= sz_h4; p_left += sz_h4; } return 0; } static int btmtkuart_receive_buf(struct serdev_device *serdev, const u8 *data, size_t count) { struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev); int err; err = btmtkuart_recv(bdev->hdev, data, count); if (err < 0) return err; bdev->hdev->stat.byte_rx += count; return count; } static void btmtkuart_write_wakeup(struct serdev_device *serdev) { struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev); btmtkuart_tx_wakeup(bdev); } static const struct serdev_device_ops btmtkuart_client_ops = { .receive_buf = btmtkuart_receive_buf, .write_wakeup = btmtkuart_write_wakeup, }; static int btmtkuart_open(struct hci_dev *hdev) { struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); struct device *dev; int err; err = serdev_device_open(bdev->serdev); if (err) { bt_dev_err(hdev, "Unable to open UART device %s", dev_name(&bdev->serdev->dev)); goto err_open; } if (btmtkuart_is_standalone(bdev)) { if (bdev->curr_speed != bdev->desired_speed) err = serdev_device_set_baudrate(bdev->serdev, 115200); else err = serdev_device_set_baudrate(bdev->serdev, bdev->desired_speed); if (err < 0) { bt_dev_err(hdev, "Unable to set baudrate UART device %s", dev_name(&bdev->serdev->dev)); goto err_serdev_close; } serdev_device_set_flow_control(bdev->serdev, false); } bdev->stp_cursor = 2; bdev->stp_dlen = 0; dev = &bdev->serdev->dev; /* Enable the power domain and clock the device requires */ pm_runtime_enable(dev); err = pm_runtime_resume_and_get(dev); if (err < 0) goto err_disable_rpm; err = clk_prepare_enable(bdev->clk); if (err < 0) goto err_put_rpm; return 0; err_put_rpm: pm_runtime_put_sync(dev); err_disable_rpm: pm_runtime_disable(dev); err_serdev_close: serdev_device_close(bdev->serdev); err_open: return err; } static int btmtkuart_close(struct hci_dev *hdev) { struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); struct device *dev = &bdev->serdev->dev; /* Shutdown the clock and power domain the device requires */ clk_disable_unprepare(bdev->clk); pm_runtime_put_sync(dev); pm_runtime_disable(dev); serdev_device_close(bdev->serdev); return 0; } static int btmtkuart_flush(struct hci_dev *hdev) { struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); /* Flush any pending characters */ serdev_device_write_flush(bdev->serdev); skb_queue_purge(&bdev->txq); cancel_work_sync(&bdev->tx_work); kfree_skb(bdev->rx_skb); bdev->rx_skb = NULL; bdev->stp_cursor = 2; bdev->stp_dlen = 0; return 0; } static int btmtkuart_func_query(struct hci_dev *hdev) { struct btmtk_hci_wmt_params wmt_params; int status, err; u8 param = 0; /* Query whether the function is enabled */ wmt_params.op = BTMTK_WMT_FUNC_CTRL; wmt_params.flag = 4; wmt_params.dlen = sizeof(param); wmt_params.data = ¶m; wmt_params.status = &status; err = mtk_hci_wmt_sync(hdev, &wmt_params); if (err < 0) { bt_dev_err(hdev, "Failed to query function status (%d)", err); return err; } return status; } static int btmtkuart_change_baudrate(struct hci_dev *hdev) { struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); struct btmtk_hci_wmt_params wmt_params; __le32 baudrate; u8 param; int err; /* Indicate the device to enter the probe state the host is * ready to change a new baudrate. */ baudrate = cpu_to_le32(bdev->desired_speed); wmt_params.op = BTMTK_WMT_HIF; wmt_params.flag = 1; wmt_params.dlen = 4; wmt_params.data = &baudrate; wmt_params.status = NULL; err = mtk_hci_wmt_sync(hdev, &wmt_params); if (err < 0) { bt_dev_err(hdev, "Failed to device baudrate (%d)", err); return err; } err = serdev_device_set_baudrate(bdev->serdev, bdev->desired_speed); if (err < 0) { bt_dev_err(hdev, "Failed to set up host baudrate (%d)", err); return err; } serdev_device_set_flow_control(bdev->serdev, false); /* Send a dummy byte 0xff to activate the new baudrate */ param = 0xff; err = serdev_device_write_buf(bdev->serdev, ¶m, sizeof(param)); if (err < 0 || err < sizeof(param)) return err; serdev_device_wait_until_sent(bdev->serdev, 0); /* Wait some time for the device changing baudrate done */ usleep_range(20000, 22000); /* Test the new baudrate */ wmt_params.op = BTMTK_WMT_TEST; wmt_params.flag = 7; wmt_params.dlen = 0; wmt_params.data = NULL; wmt_params.status = NULL; err = mtk_hci_wmt_sync(hdev, &wmt_params); if (err < 0) { bt_dev_err(hdev, "Failed to test new baudrate (%d)", err); return err; } bdev->curr_speed = bdev->desired_speed; return 0; } static int btmtkuart_setup(struct hci_dev *hdev) { struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); struct btmtk_hci_wmt_params wmt_params; ktime_t calltime, delta, rettime; struct btmtk_tci_sleep tci_sleep; unsigned long long duration; struct sk_buff *skb; int err, status; u8 param = 0x1; calltime = ktime_get(); /* Wakeup MCUSYS is required for certain devices before we start to * do any setups. */ if (test_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state)) { wmt_params.op = BTMTK_WMT_WAKEUP; wmt_params.flag = 3; wmt_params.dlen = 0; wmt_params.data = NULL; wmt_params.status = NULL; err = mtk_hci_wmt_sync(hdev, &wmt_params); if (err < 0) { bt_dev_err(hdev, "Failed to wakeup the chip (%d)", err); return err; } clear_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state); } if (btmtkuart_is_standalone(bdev)) btmtkuart_change_baudrate(hdev); /* Query whether the firmware is already download */ wmt_params.op = BTMTK_WMT_SEMAPHORE; wmt_params.flag = 1; wmt_params.dlen = 0; wmt_params.data = NULL; wmt_params.status = &status; err = mtk_hci_wmt_sync(hdev, &wmt_params); if (err < 0) { bt_dev_err(hdev, "Failed to query firmware status (%d)", err); return err; } if (status == BTMTK_WMT_PATCH_DONE) { bt_dev_info(hdev, "Firmware already downloaded"); goto ignore_setup_fw; } /* Setup a firmware which the device definitely requires */ err = btmtk_setup_firmware(hdev, bdev->data->fwname, mtk_hci_wmt_sync); if (err < 0) return err; ignore_setup_fw: /* Query whether the device is already enabled */ err = readx_poll_timeout(btmtkuart_func_query, hdev, status, status < 0 || status != BTMTK_WMT_ON_PROGRESS, 2000, 5000000); /* -ETIMEDOUT happens */ if (err < 0) return err; /* The other errors happen in btusb_mtk_func_query */ if (status < 0) return status; if (status == BTMTK_WMT_ON_DONE) { bt_dev_info(hdev, "function already on"); goto ignore_func_on; } /* Enable Bluetooth protocol */ wmt_params.op = BTMTK_WMT_FUNC_CTRL; wmt_params.flag = 0; wmt_params.dlen = sizeof(param); wmt_params.data = ¶m; wmt_params.status = NULL; err = mtk_hci_wmt_sync(hdev, &wmt_params); if (err < 0) { bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); return err; } ignore_func_on: /* Apply the low power environment setup */ tci_sleep.mode = 0x5; tci_sleep.duration = cpu_to_le16(0x640); tci_sleep.host_duration = cpu_to_le16(0x640); tci_sleep.host_wakeup_pin = 0; tci_sleep.time_compensation = 0; skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { err = PTR_ERR(skb); bt_dev_err(hdev, "Failed to apply low power setting (%d)", err); return err; } kfree_skb(skb); rettime = ktime_get(); delta = ktime_sub(rettime, calltime); duration = (unsigned long long)ktime_to_ns(delta) >> 10; bt_dev_info(hdev, "Device setup in %llu usecs", duration); return 0; } static int btmtkuart_shutdown(struct hci_dev *hdev) { struct btmtk_hci_wmt_params wmt_params; u8 param = 0x0; int err; /* Disable the device */ wmt_params.op = BTMTK_WMT_FUNC_CTRL; wmt_params.flag = 0; wmt_params.dlen = sizeof(param); wmt_params.data = ¶m; wmt_params.status = NULL; err = mtk_hci_wmt_sync(hdev, &wmt_params); if (err < 0) { bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); return err; } return 0; } static int btmtkuart_send_frame(struct hci_dev *hdev, struct sk_buff *skb) { struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); struct mtk_stp_hdr *shdr; int err, dlen, type = 0; /* Prepend skb with frame type */ memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1); /* Make sure that there is enough rooms for STP header and trailer */ if (unlikely(skb_headroom(skb) < sizeof(*shdr)) || (skb_tailroom(skb) < MTK_STP_TLR_SIZE)) { err = pskb_expand_head(skb, sizeof(*shdr), MTK_STP_TLR_SIZE, GFP_ATOMIC); if (err < 0) return err; } /* Add the STP header */ dlen = skb->len; shdr = skb_push(skb, sizeof(*shdr)); shdr->prefix = 0x80; shdr->dlen = cpu_to_be16((dlen & 0x0fff) | (type << 12)); shdr->cs = 0; /* MT7622 doesn't care about checksum value */ /* Add the STP trailer */ skb_put_zero(skb, MTK_STP_TLR_SIZE); skb_queue_tail(&bdev->txq, skb); btmtkuart_tx_wakeup(bdev); return 0; } static int btmtkuart_parse_dt(struct serdev_device *serdev) { struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev); struct device_node *node = serdev->dev.of_node; u32 speed = 921600; int err; if (btmtkuart_is_standalone(bdev)) { of_property_read_u32(node, "current-speed", &speed); bdev->desired_speed = speed; bdev->vcc = devm_regulator_get(&serdev->dev, "vcc"); if (IS_ERR(bdev->vcc)) { err = PTR_ERR(bdev->vcc); return err; } bdev->osc = devm_clk_get_optional(&serdev->dev, "osc"); if (IS_ERR(bdev->osc)) { err = PTR_ERR(bdev->osc); return err; } bdev->boot = devm_gpiod_get_optional(&serdev->dev, "boot", GPIOD_OUT_LOW); if (IS_ERR(bdev->boot)) { err = PTR_ERR(bdev->boot); return err; } bdev->pinctrl = devm_pinctrl_get(&serdev->dev); if (IS_ERR(bdev->pinctrl)) { err = PTR_ERR(bdev->pinctrl); return err; } bdev->pins_boot = pinctrl_lookup_state(bdev->pinctrl, "default"); if (IS_ERR(bdev->pins_boot) && !bdev->boot) { err = PTR_ERR(bdev->pins_boot); dev_err(&serdev->dev, "Should assign RXD to LOW at boot stage\n"); return err; } bdev->pins_runtime = pinctrl_lookup_state(bdev->pinctrl, "runtime"); if (IS_ERR(bdev->pins_runtime)) { err = PTR_ERR(bdev->pins_runtime); return err; } bdev->reset = devm_gpiod_get_optional(&serdev->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(bdev->reset)) { err = PTR_ERR(bdev->reset); return err; } } else if (btmtkuart_is_builtin_soc(bdev)) { bdev->clk = devm_clk_get(&serdev->dev, "ref"); if (IS_ERR(bdev->clk)) return PTR_ERR(bdev->clk); } return 0; } static int btmtkuart_probe(struct serdev_device *serdev) { struct btmtkuart_dev *bdev; struct hci_dev *hdev; int err; bdev = devm_kzalloc(&serdev->dev, sizeof(*bdev), GFP_KERNEL); if (!bdev) return -ENOMEM; bdev->data = of_device_get_match_data(&serdev->dev); if (!bdev->data) return -ENODEV; bdev->serdev = serdev; serdev_device_set_drvdata(serdev, bdev); serdev_device_set_client_ops(serdev, &btmtkuart_client_ops); err = btmtkuart_parse_dt(serdev); if (err < 0) return err; INIT_WORK(&bdev->tx_work, btmtkuart_tx_work); skb_queue_head_init(&bdev->txq); /* Initialize and register HCI device */ hdev = hci_alloc_dev(); if (!hdev) { dev_err(&serdev->dev, "Can't allocate HCI device\n"); return -ENOMEM; } bdev->hdev = hdev; hdev->bus = HCI_UART; hci_set_drvdata(hdev, bdev); hdev->open = btmtkuart_open; hdev->close = btmtkuart_close; hdev->flush = btmtkuart_flush; hdev->setup = btmtkuart_setup; hdev->shutdown = btmtkuart_shutdown; hdev->send = btmtkuart_send_frame; hdev->set_bdaddr = btmtk_set_bdaddr; SET_HCIDEV_DEV(hdev, &serdev->dev); hdev->manufacturer = 70; set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks); if (btmtkuart_is_standalone(bdev)) { err = clk_prepare_enable(bdev->osc); if (err < 0) goto err_hci_free_dev; if (bdev->boot) { gpiod_set_value_cansleep(bdev->boot, 1); } else { /* Switch to the specific pin state for the booting * requires. */ pinctrl_select_state(bdev->pinctrl, bdev->pins_boot); } /* Power on */ err = regulator_enable(bdev->vcc); if (err < 0) goto err_clk_disable_unprepare; /* Reset if the reset-gpios is available otherwise the board * -level design should be guaranteed. */ if (bdev->reset) { gpiod_set_value_cansleep(bdev->reset, 1); usleep_range(1000, 2000); gpiod_set_value_cansleep(bdev->reset, 0); } /* Wait some time until device got ready and switch to the pin * mode the device requires for UART transfers. */ msleep(50); if (bdev->boot) devm_gpiod_put(&serdev->dev, bdev->boot); pinctrl_select_state(bdev->pinctrl, bdev->pins_runtime); /* A standalone device doesn't depends on power domain on SoC, * so mark it as no callbacks. */ pm_runtime_no_callbacks(&serdev->dev); set_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state); } err = hci_register_dev(hdev); if (err < 0) { dev_err(&serdev->dev, "Can't register HCI device\n"); goto err_regulator_disable; } return 0; err_regulator_disable: if (btmtkuart_is_standalone(bdev)) regulator_disable(bdev->vcc); err_clk_disable_unprepare: if (btmtkuart_is_standalone(bdev)) clk_disable_unprepare(bdev->osc); err_hci_free_dev: hci_free_dev(hdev); return err; } static void btmtkuart_remove(struct serdev_device *serdev) { struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev); struct hci_dev *hdev = bdev->hdev; if (btmtkuart_is_standalone(bdev)) { regulator_disable(bdev->vcc); clk_disable_unprepare(bdev->osc); } hci_unregister_dev(hdev); hci_free_dev(hdev); } static const struct btmtkuart_data mt7622_data __maybe_unused = { .fwname = FIRMWARE_MT7622, }; static const struct btmtkuart_data mt7663_data __maybe_unused = { .flags = BTMTKUART_FLAG_STANDALONE_HW, .fwname = FIRMWARE_MT7663, }; static const struct btmtkuart_data mt7668_data __maybe_unused = { .flags = BTMTKUART_FLAG_STANDALONE_HW, .fwname = FIRMWARE_MT7668, }; #ifdef CONFIG_OF static const struct of_device_id mtk_of_match_table[] = { { .compatible = "mediatek,mt7622-bluetooth", .data = &mt7622_data}, { .compatible = "mediatek,mt7663u-bluetooth", .data = &mt7663_data}, { .compatible = "mediatek,mt7668u-bluetooth", .data = &mt7668_data}, { } }; MODULE_DEVICE_TABLE(of, mtk_of_match_table); #endif static struct serdev_device_driver btmtkuart_driver = { .probe = btmtkuart_probe, .remove = btmtkuart_remove, .driver = { .name = "btmtkuart", .of_match_table = of_match_ptr(mtk_of_match_table), }, }; module_serdev_device_driver(btmtkuart_driver); MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>"); MODULE_DESCRIPTION("MediaTek Bluetooth Serial driver ver " VERSION); MODULE_VERSION(VERSION); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1