Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Loic Poulain | 4288 | 80.78% | 22 | 39.29% |
Slark Xiao | 237 | 4.46% | 9 | 16.07% |
Thomas Perrot | 168 | 3.17% | 1 | 1.79% |
Jarvis Jiang | 125 | 2.35% | 2 | 3.57% |
ULRICH Thomas | 125 | 2.35% | 1 | 1.79% |
Daniele Palmas | 100 | 1.88% | 2 | 3.57% |
Bhaumik Bhatt | 89 | 1.68% | 3 | 5.36% |
Richard Laing | 32 | 0.60% | 1 | 1.79% |
Manivannan Sadhasivam | 31 | 0.58% | 4 | 7.14% |
Yonglin Tan | 23 | 0.43% | 2 | 3.57% |
Johan Hovold | 22 | 0.41% | 1 | 1.79% |
Björn Andersson | 19 | 0.36% | 1 | 1.79% |
Song Fuchang | 19 | 0.36% | 1 | 1.79% |
Fabio Porcedda | 16 | 0.30% | 1 | 1.79% |
Jakub Kiciński | 7 | 0.13% | 1 | 1.79% |
Björn Helgaas | 3 | 0.06% | 1 | 1.79% |
Christophe Jaillet | 2 | 0.04% | 1 | 1.79% |
Wei Yongjun | 1 | 0.02% | 1 | 1.79% |
Koen Vandeputte | 1 | 0.02% | 1 | 1.79% |
Total | 5308 | 56 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * MHI PCI driver - MHI over PCI controller driver * * This module is a generic driver for registering MHI-over-PCI devices, * such as PCIe QCOM modems. * * Copyright (C) 2020 Linaro Ltd <loic.poulain@linaro.org> */ #include <linux/delay.h> #include <linux/device.h> #include <linux/mhi.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/pm_runtime.h> #include <linux/timer.h> #include <linux/workqueue.h> #define MHI_PCI_DEFAULT_BAR_NUM 0 #define MHI_POST_RESET_DELAY_MS 2000 #define HEALTH_CHECK_PERIOD (HZ * 2) /* PCI VID definitions */ #define PCI_VENDOR_ID_THALES 0x1269 #define PCI_VENDOR_ID_QUECTEL 0x1eac /** * struct mhi_pci_dev_info - MHI PCI device specific information * @config: MHI controller configuration * @name: name of the PCI module * @fw: firmware path (if any) * @edl: emergency download mode firmware path (if any) * @bar_num: PCI base address register to use for MHI MMIO register space * @dma_data_width: DMA transfer word size (32 or 64 bits) * @mru_default: default MRU size for MBIM network packets * @sideband_wake: Devices using dedicated sideband GPIO for wakeup instead * of inband wake support (such as sdx24) */ struct mhi_pci_dev_info { const struct mhi_controller_config *config; const char *name; const char *fw; const char *edl; unsigned int bar_num; unsigned int dma_data_width; unsigned int mru_default; bool sideband_wake; }; #define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \ { \ .num = ch_num, \ .name = ch_name, \ .num_elements = el_count, \ .event_ring = ev_ring, \ .dir = DMA_TO_DEVICE, \ .ee_mask = BIT(MHI_EE_AMSS), \ .pollcfg = 0, \ .doorbell = MHI_DB_BRST_DISABLE, \ .lpm_notify = false, \ .offload_channel = false, \ .doorbell_mode_switch = false, \ } \ #define MHI_CHANNEL_CONFIG_DL(ch_num, ch_name, el_count, ev_ring) \ { \ .num = ch_num, \ .name = ch_name, \ .num_elements = el_count, \ .event_ring = ev_ring, \ .dir = DMA_FROM_DEVICE, \ .ee_mask = BIT(MHI_EE_AMSS), \ .pollcfg = 0, \ .doorbell = MHI_DB_BRST_DISABLE, \ .lpm_notify = false, \ .offload_channel = false, \ .doorbell_mode_switch = false, \ } #define MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(ch_num, ch_name, el_count, ev_ring) \ { \ .num = ch_num, \ .name = ch_name, \ .num_elements = el_count, \ .event_ring = ev_ring, \ .dir = DMA_FROM_DEVICE, \ .ee_mask = BIT(MHI_EE_AMSS), \ .pollcfg = 0, \ .doorbell = MHI_DB_BRST_DISABLE, \ .lpm_notify = false, \ .offload_channel = false, \ .doorbell_mode_switch = false, \ .auto_queue = true, \ } #define MHI_EVENT_CONFIG_CTRL(ev_ring, el_count) \ { \ .num_elements = el_count, \ .irq_moderation_ms = 0, \ .irq = (ev_ring) + 1, \ .priority = 1, \ .mode = MHI_DB_BRST_DISABLE, \ .data_type = MHI_ER_CTRL, \ .hardware_event = false, \ .client_managed = false, \ .offload_channel = false, \ } #define MHI_CHANNEL_CONFIG_HW_UL(ch_num, ch_name, el_count, ev_ring) \ { \ .num = ch_num, \ .name = ch_name, \ .num_elements = el_count, \ .event_ring = ev_ring, \ .dir = DMA_TO_DEVICE, \ .ee_mask = BIT(MHI_EE_AMSS), \ .pollcfg = 0, \ .doorbell = MHI_DB_BRST_ENABLE, \ .lpm_notify = false, \ .offload_channel = false, \ .doorbell_mode_switch = true, \ } \ #define MHI_CHANNEL_CONFIG_HW_DL(ch_num, ch_name, el_count, ev_ring) \ { \ .num = ch_num, \ .name = ch_name, \ .num_elements = el_count, \ .event_ring = ev_ring, \ .dir = DMA_FROM_DEVICE, \ .ee_mask = BIT(MHI_EE_AMSS), \ .pollcfg = 0, \ .doorbell = MHI_DB_BRST_ENABLE, \ .lpm_notify = false, \ .offload_channel = false, \ .doorbell_mode_switch = true, \ } #define MHI_CHANNEL_CONFIG_UL_SBL(ch_num, ch_name, el_count, ev_ring) \ { \ .num = ch_num, \ .name = ch_name, \ .num_elements = el_count, \ .event_ring = ev_ring, \ .dir = DMA_TO_DEVICE, \ .ee_mask = BIT(MHI_EE_SBL), \ .pollcfg = 0, \ .doorbell = MHI_DB_BRST_DISABLE, \ .lpm_notify = false, \ .offload_channel = false, \ .doorbell_mode_switch = false, \ } \ #define MHI_CHANNEL_CONFIG_DL_SBL(ch_num, ch_name, el_count, ev_ring) \ { \ .num = ch_num, \ .name = ch_name, \ .num_elements = el_count, \ .event_ring = ev_ring, \ .dir = DMA_FROM_DEVICE, \ .ee_mask = BIT(MHI_EE_SBL), \ .pollcfg = 0, \ .doorbell = MHI_DB_BRST_DISABLE, \ .lpm_notify = false, \ .offload_channel = false, \ .doorbell_mode_switch = false, \ } #define MHI_CHANNEL_CONFIG_UL_FP(ch_num, ch_name, el_count, ev_ring) \ { \ .num = ch_num, \ .name = ch_name, \ .num_elements = el_count, \ .event_ring = ev_ring, \ .dir = DMA_TO_DEVICE, \ .ee_mask = BIT(MHI_EE_FP), \ .pollcfg = 0, \ .doorbell = MHI_DB_BRST_DISABLE, \ .lpm_notify = false, \ .offload_channel = false, \ .doorbell_mode_switch = false, \ } \ #define MHI_CHANNEL_CONFIG_DL_FP(ch_num, ch_name, el_count, ev_ring) \ { \ .num = ch_num, \ .name = ch_name, \ .num_elements = el_count, \ .event_ring = ev_ring, \ .dir = DMA_FROM_DEVICE, \ .ee_mask = BIT(MHI_EE_FP), \ .pollcfg = 0, \ .doorbell = MHI_DB_BRST_DISABLE, \ .lpm_notify = false, \ .offload_channel = false, \ .doorbell_mode_switch = false, \ } #define MHI_EVENT_CONFIG_DATA(ev_ring, el_count) \ { \ .num_elements = el_count, \ .irq_moderation_ms = 5, \ .irq = (ev_ring) + 1, \ .priority = 1, \ .mode = MHI_DB_BRST_DISABLE, \ .data_type = MHI_ER_DATA, \ .hardware_event = false, \ .client_managed = false, \ .offload_channel = false, \ } #define MHI_EVENT_CONFIG_HW_DATA(ev_ring, el_count, ch_num) \ { \ .num_elements = el_count, \ .irq_moderation_ms = 1, \ .irq = (ev_ring) + 1, \ .priority = 1, \ .mode = MHI_DB_BRST_DISABLE, \ .data_type = MHI_ER_DATA, \ .hardware_event = true, \ .client_managed = false, \ .offload_channel = false, \ .channel = ch_num, \ } static const struct mhi_channel_config modem_qcom_v1_mhi_channels[] = { MHI_CHANNEL_CONFIG_UL(4, "DIAG", 16, 1), MHI_CHANNEL_CONFIG_DL(5, "DIAG", 16, 1), MHI_CHANNEL_CONFIG_UL(12, "MBIM", 4, 0), MHI_CHANNEL_CONFIG_DL(13, "MBIM", 4, 0), MHI_CHANNEL_CONFIG_UL(14, "QMI", 4, 0), MHI_CHANNEL_CONFIG_DL(15, "QMI", 4, 0), MHI_CHANNEL_CONFIG_UL(20, "IPCR", 8, 0), MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(21, "IPCR", 8, 0), MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0), MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0), MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 2), MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 128, 3), }; static struct mhi_event_config modem_qcom_v1_mhi_events[] = { /* first ring is control+data ring */ MHI_EVENT_CONFIG_CTRL(0, 64), /* DIAG dedicated event ring */ MHI_EVENT_CONFIG_DATA(1, 128), /* Hardware channels request dedicated hardware event rings */ MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100), MHI_EVENT_CONFIG_HW_DATA(3, 2048, 101) }; static const struct mhi_controller_config modem_qcom_v1_mhiv_config = { .max_channels = 128, .timeout_ms = 8000, .num_channels = ARRAY_SIZE(modem_qcom_v1_mhi_channels), .ch_cfg = modem_qcom_v1_mhi_channels, .num_events = ARRAY_SIZE(modem_qcom_v1_mhi_events), .event_cfg = modem_qcom_v1_mhi_events, }; static const struct mhi_pci_dev_info mhi_qcom_sdx65_info = { .name = "qcom-sdx65m", .fw = "qcom/sdx65m/xbl.elf", .edl = "qcom/sdx65m/edl.mbn", .config = &modem_qcom_v1_mhiv_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, .dma_data_width = 32, .sideband_wake = false, }; static const struct mhi_pci_dev_info mhi_qcom_sdx55_info = { .name = "qcom-sdx55m", .fw = "qcom/sdx55m/sbl1.mbn", .edl = "qcom/sdx55m/edl.mbn", .config = &modem_qcom_v1_mhiv_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, .dma_data_width = 32, .mru_default = 32768, .sideband_wake = false, }; static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = { .name = "qcom-sdx24", .edl = "qcom/prog_firehose_sdx24.mbn", .config = &modem_qcom_v1_mhiv_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, .dma_data_width = 32, .sideband_wake = true, }; static const struct mhi_channel_config mhi_quectel_em1xx_channels[] = { MHI_CHANNEL_CONFIG_UL(0, "NMEA", 32, 0), MHI_CHANNEL_CONFIG_DL(1, "NMEA", 32, 0), MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 32, 0), MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 32, 0), MHI_CHANNEL_CONFIG_UL(4, "DIAG", 32, 1), MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 1), MHI_CHANNEL_CONFIG_UL(12, "MBIM", 32, 0), MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0), MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0), MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0), /* The EDL firmware is a flash-programmer exposing firehose protocol */ MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0), MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0), MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2), MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3), }; static struct mhi_event_config mhi_quectel_em1xx_events[] = { MHI_EVENT_CONFIG_CTRL(0, 128), MHI_EVENT_CONFIG_DATA(1, 128), MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100), MHI_EVENT_CONFIG_HW_DATA(3, 1024, 101) }; static const struct mhi_controller_config modem_quectel_em1xx_config = { .max_channels = 128, .timeout_ms = 20000, .num_channels = ARRAY_SIZE(mhi_quectel_em1xx_channels), .ch_cfg = mhi_quectel_em1xx_channels, .num_events = ARRAY_SIZE(mhi_quectel_em1xx_events), .event_cfg = mhi_quectel_em1xx_events, }; static const struct mhi_pci_dev_info mhi_quectel_em1xx_info = { .name = "quectel-em1xx", .edl = "qcom/prog_firehose_sdx24.mbn", .config = &modem_quectel_em1xx_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, .dma_data_width = 32, .mru_default = 32768, .sideband_wake = true, }; static const struct mhi_channel_config mhi_foxconn_sdx55_channels[] = { MHI_CHANNEL_CONFIG_UL(0, "LOOPBACK", 32, 0), MHI_CHANNEL_CONFIG_DL(1, "LOOPBACK", 32, 0), MHI_CHANNEL_CONFIG_UL(4, "DIAG", 32, 1), MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 1), MHI_CHANNEL_CONFIG_UL(12, "MBIM", 32, 0), MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0), MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0), MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0), MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2), MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3), }; static struct mhi_event_config mhi_foxconn_sdx55_events[] = { MHI_EVENT_CONFIG_CTRL(0, 128), MHI_EVENT_CONFIG_DATA(1, 128), MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100), MHI_EVENT_CONFIG_HW_DATA(3, 1024, 101) }; static const struct mhi_controller_config modem_foxconn_sdx55_config = { .max_channels = 128, .timeout_ms = 20000, .num_channels = ARRAY_SIZE(mhi_foxconn_sdx55_channels), .ch_cfg = mhi_foxconn_sdx55_channels, .num_events = ARRAY_SIZE(mhi_foxconn_sdx55_events), .event_cfg = mhi_foxconn_sdx55_events, }; static const struct mhi_pci_dev_info mhi_foxconn_sdx24_info = { .name = "foxconn-sdx24", .config = &modem_foxconn_sdx55_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, .dma_data_width = 32, .mru_default = 32768, .sideband_wake = false, }; static const struct mhi_pci_dev_info mhi_foxconn_sdx55_info = { .name = "foxconn-sdx55", .fw = "qcom/sdx55m/sbl1.mbn", .edl = "qcom/sdx55m/edl.mbn", .config = &modem_foxconn_sdx55_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, .dma_data_width = 32, .mru_default = 32768, .sideband_wake = false, }; static const struct mhi_pci_dev_info mhi_foxconn_sdx65_info = { .name = "foxconn-sdx65", .config = &modem_foxconn_sdx55_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, .dma_data_width = 32, .mru_default = 32768, .sideband_wake = false, }; static const struct mhi_channel_config mhi_mv3x_channels[] = { MHI_CHANNEL_CONFIG_UL(0, "LOOPBACK", 64, 0), MHI_CHANNEL_CONFIG_DL(1, "LOOPBACK", 64, 0), /* MBIM Control Channel */ MHI_CHANNEL_CONFIG_UL(12, "MBIM", 64, 0), MHI_CHANNEL_CONFIG_DL(13, "MBIM", 64, 0), /* MBIM Data Channel */ MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 512, 2), MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 512, 3), }; static struct mhi_event_config mhi_mv3x_events[] = { MHI_EVENT_CONFIG_CTRL(0, 256), MHI_EVENT_CONFIG_DATA(1, 256), MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100), MHI_EVENT_CONFIG_HW_DATA(3, 1024, 101), }; static const struct mhi_controller_config modem_mv3x_config = { .max_channels = 128, .timeout_ms = 20000, .num_channels = ARRAY_SIZE(mhi_mv3x_channels), .ch_cfg = mhi_mv3x_channels, .num_events = ARRAY_SIZE(mhi_mv3x_events), .event_cfg = mhi_mv3x_events, }; static const struct mhi_pci_dev_info mhi_mv31_info = { .name = "cinterion-mv31", .config = &modem_mv3x_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, .dma_data_width = 32, .mru_default = 32768, }; static const struct mhi_pci_dev_info mhi_mv32_info = { .name = "cinterion-mv32", .config = &modem_mv3x_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, .dma_data_width = 32, .mru_default = 32768, }; static const struct mhi_channel_config mhi_sierra_em919x_channels[] = { MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 32, 0), MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 256, 0), MHI_CHANNEL_CONFIG_UL(4, "DIAG", 32, 0), MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 0), MHI_CHANNEL_CONFIG_UL(12, "MBIM", 128, 0), MHI_CHANNEL_CONFIG_DL(13, "MBIM", 128, 0), MHI_CHANNEL_CONFIG_UL(14, "QMI", 32, 0), MHI_CHANNEL_CONFIG_DL(15, "QMI", 32, 0), MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0), MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0), MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 512, 1), MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 512, 2), }; static struct mhi_event_config modem_sierra_em919x_mhi_events[] = { /* first ring is control+data and DIAG ring */ MHI_EVENT_CONFIG_CTRL(0, 2048), /* Hardware channels request dedicated hardware event rings */ MHI_EVENT_CONFIG_HW_DATA(1, 2048, 100), MHI_EVENT_CONFIG_HW_DATA(2, 2048, 101) }; static const struct mhi_controller_config modem_sierra_em919x_config = { .max_channels = 128, .timeout_ms = 24000, .num_channels = ARRAY_SIZE(mhi_sierra_em919x_channels), .ch_cfg = mhi_sierra_em919x_channels, .num_events = ARRAY_SIZE(modem_sierra_em919x_mhi_events), .event_cfg = modem_sierra_em919x_mhi_events, }; static const struct mhi_pci_dev_info mhi_sierra_em919x_info = { .name = "sierra-em919x", .config = &modem_sierra_em919x_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, .dma_data_width = 32, .sideband_wake = false, }; static const struct mhi_channel_config mhi_telit_fn980_hw_v1_channels[] = { MHI_CHANNEL_CONFIG_UL(14, "QMI", 32, 0), MHI_CHANNEL_CONFIG_DL(15, "QMI", 32, 0), MHI_CHANNEL_CONFIG_UL(20, "IPCR", 16, 0), MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(21, "IPCR", 16, 0), MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 1), MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 128, 2), }; static struct mhi_event_config mhi_telit_fn980_hw_v1_events[] = { MHI_EVENT_CONFIG_CTRL(0, 128), MHI_EVENT_CONFIG_HW_DATA(1, 1024, 100), MHI_EVENT_CONFIG_HW_DATA(2, 2048, 101) }; static struct mhi_controller_config modem_telit_fn980_hw_v1_config = { .max_channels = 128, .timeout_ms = 20000, .num_channels = ARRAY_SIZE(mhi_telit_fn980_hw_v1_channels), .ch_cfg = mhi_telit_fn980_hw_v1_channels, .num_events = ARRAY_SIZE(mhi_telit_fn980_hw_v1_events), .event_cfg = mhi_telit_fn980_hw_v1_events, }; static const struct mhi_pci_dev_info mhi_telit_fn980_hw_v1_info = { .name = "telit-fn980-hwv1", .fw = "qcom/sdx55m/sbl1.mbn", .edl = "qcom/sdx55m/edl.mbn", .config = &modem_telit_fn980_hw_v1_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, .dma_data_width = 32, .mru_default = 32768, .sideband_wake = false, }; static const struct mhi_channel_config mhi_telit_fn990_channels[] = { MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 32, 0), MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 32, 0), MHI_CHANNEL_CONFIG_UL(4, "DIAG", 64, 1), MHI_CHANNEL_CONFIG_DL(5, "DIAG", 64, 1), MHI_CHANNEL_CONFIG_UL(12, "MBIM", 32, 0), MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0), MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0), MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0), MHI_CHANNEL_CONFIG_UL(92, "DUN2", 32, 1), MHI_CHANNEL_CONFIG_DL(93, "DUN2", 32, 1), MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2), MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3), }; static struct mhi_event_config mhi_telit_fn990_events[] = { MHI_EVENT_CONFIG_CTRL(0, 128), MHI_EVENT_CONFIG_DATA(1, 128), MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100), MHI_EVENT_CONFIG_HW_DATA(3, 2048, 101) }; static const struct mhi_controller_config modem_telit_fn990_config = { .max_channels = 128, .timeout_ms = 20000, .num_channels = ARRAY_SIZE(mhi_telit_fn990_channels), .ch_cfg = mhi_telit_fn990_channels, .num_events = ARRAY_SIZE(mhi_telit_fn990_events), .event_cfg = mhi_telit_fn990_events, }; static const struct mhi_pci_dev_info mhi_telit_fn990_info = { .name = "telit-fn990", .config = &modem_telit_fn990_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, .dma_data_width = 32, .sideband_wake = false, .mru_default = 32768, }; /* Keep the list sorted based on the PID. New VID should be added as the last entry */ static const struct pci_device_id mhi_pci_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304), .driver_data = (kernel_ulong_t) &mhi_qcom_sdx24_info }, { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, PCI_VENDOR_ID_QCOM, 0x010c), .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info }, /* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */ { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x18d7, 0x0200), .driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info }, /* Telit FN980 hardware revision v1 */ { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x1C5D, 0x2000), .driver_data = (kernel_ulong_t) &mhi_telit_fn980_hw_v1_info }, { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0306), .driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info }, /* Telit FN990 */ { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0308, 0x1c5d, 0x2010), .driver_data = (kernel_ulong_t) &mhi_telit_fn990_info }, { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308), .driver_data = (kernel_ulong_t) &mhi_qcom_sdx65_info }, { PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1001), /* EM120R-GL (sdx24) */ .driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info }, { PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1002), /* EM160R-GL (sdx24) */ .driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info }, { PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x2001), /* EM120R-GL for FCCL (sdx24) */ .driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info }, /* T99W175 (sdx55), Both for eSIM and Non-eSIM */ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0ab), .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info }, /* DW5930e (sdx55), With eSIM, It's also T99W175 */ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0b0), .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info }, /* DW5930e (sdx55), Non-eSIM, It's also T99W175 */ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0b1), .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info }, /* T99W175 (sdx55), Based on Qualcomm new baseline */ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0bf), .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info }, /* T99W175 (sdx55) */ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0c3), .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info }, /* T99W368 (sdx65) */ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0d8), .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx65_info }, /* T99W373 (sdx62) */ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0d9), .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx65_info }, /* T99W510 (sdx24), variant 1 */ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0f0), .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx24_info }, /* T99W510 (sdx24), variant 2 */ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0f1), .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx24_info }, /* T99W510 (sdx24), variant 3 */ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0f2), .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx24_info }, /* MV31-W (Cinterion) */ { PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00b3), .driver_data = (kernel_ulong_t) &mhi_mv31_info }, /* MV31-W (Cinterion), based on new baseline */ { PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00b4), .driver_data = (kernel_ulong_t) &mhi_mv31_info }, /* MV32-WA (Cinterion) */ { PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00ba), .driver_data = (kernel_ulong_t) &mhi_mv32_info }, /* MV32-WB (Cinterion) */ { PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00bb), .driver_data = (kernel_ulong_t) &mhi_mv32_info }, /* T99W175 (sdx55), HP variant */ { PCI_DEVICE(0x03f0, 0x0a6c), .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info }, { } }; MODULE_DEVICE_TABLE(pci, mhi_pci_id_table); enum mhi_pci_device_status { MHI_PCI_DEV_STARTED, MHI_PCI_DEV_SUSPENDED, }; struct mhi_pci_device { struct mhi_controller mhi_cntrl; struct pci_saved_state *pci_state; struct work_struct recovery_work; struct timer_list health_check_timer; unsigned long status; }; static int mhi_pci_read_reg(struct mhi_controller *mhi_cntrl, void __iomem *addr, u32 *out) { *out = readl(addr); return 0; } static void mhi_pci_write_reg(struct mhi_controller *mhi_cntrl, void __iomem *addr, u32 val) { writel(val, addr); } static void mhi_pci_status_cb(struct mhi_controller *mhi_cntrl, enum mhi_callback cb) { struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev); /* Nothing to do for now */ switch (cb) { case MHI_CB_FATAL_ERROR: case MHI_CB_SYS_ERROR: dev_warn(&pdev->dev, "firmware crashed (%u)\n", cb); pm_runtime_forbid(&pdev->dev); break; case MHI_CB_EE_MISSION_MODE: pm_runtime_allow(&pdev->dev); break; default: break; } } static void mhi_pci_wake_get_nop(struct mhi_controller *mhi_cntrl, bool force) { /* no-op */ } static void mhi_pci_wake_put_nop(struct mhi_controller *mhi_cntrl, bool override) { /* no-op */ } static void mhi_pci_wake_toggle_nop(struct mhi_controller *mhi_cntrl) { /* no-op */ } static bool mhi_pci_is_alive(struct mhi_controller *mhi_cntrl) { struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev); u16 vendor = 0; if (pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor)) return false; if (vendor == (u16) ~0 || vendor == 0) return false; return true; } static int mhi_pci_claim(struct mhi_controller *mhi_cntrl, unsigned int bar_num, u64 dma_mask) { struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev); int err; err = pci_assign_resource(pdev, bar_num); if (err) return err; err = pcim_enable_device(pdev); if (err) { dev_err(&pdev->dev, "failed to enable pci device: %d\n", err); return err; } err = pcim_iomap_regions(pdev, 1 << bar_num, pci_name(pdev)); if (err) { dev_err(&pdev->dev, "failed to map pci region: %d\n", err); return err; } mhi_cntrl->regs = pcim_iomap_table(pdev)[bar_num]; mhi_cntrl->reg_len = pci_resource_len(pdev, bar_num); err = dma_set_mask_and_coherent(&pdev->dev, dma_mask); if (err) { dev_err(&pdev->dev, "Cannot set proper DMA mask\n"); return err; } pci_set_master(pdev); return 0; } static int mhi_pci_get_irqs(struct mhi_controller *mhi_cntrl, const struct mhi_controller_config *mhi_cntrl_config) { struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev); int nr_vectors, i; int *irq; /* * Alloc one MSI vector for BHI + one vector per event ring, ideally... * No explicit pci_free_irq_vectors required, done by pcim_release. */ mhi_cntrl->nr_irqs = 1 + mhi_cntrl_config->num_events; nr_vectors = pci_alloc_irq_vectors(pdev, 1, mhi_cntrl->nr_irqs, PCI_IRQ_MSI); if (nr_vectors < 0) { dev_err(&pdev->dev, "Error allocating MSI vectors %d\n", nr_vectors); return nr_vectors; } if (nr_vectors < mhi_cntrl->nr_irqs) { dev_warn(&pdev->dev, "using shared MSI\n"); /* Patch msi vectors, use only one (shared) */ for (i = 0; i < mhi_cntrl_config->num_events; i++) mhi_cntrl_config->event_cfg[i].irq = 0; mhi_cntrl->nr_irqs = 1; } irq = devm_kcalloc(&pdev->dev, mhi_cntrl->nr_irqs, sizeof(int), GFP_KERNEL); if (!irq) return -ENOMEM; for (i = 0; i < mhi_cntrl->nr_irqs; i++) { int vector = i >= nr_vectors ? (nr_vectors - 1) : i; irq[i] = pci_irq_vector(pdev, vector); } mhi_cntrl->irq = irq; return 0; } static int mhi_pci_runtime_get(struct mhi_controller *mhi_cntrl) { /* The runtime_get() MHI callback means: * Do whatever is requested to leave M3. */ return pm_runtime_get(mhi_cntrl->cntrl_dev); } static void mhi_pci_runtime_put(struct mhi_controller *mhi_cntrl) { /* The runtime_put() MHI callback means: * Device can be moved in M3 state. */ pm_runtime_mark_last_busy(mhi_cntrl->cntrl_dev); pm_runtime_put(mhi_cntrl->cntrl_dev); } static void mhi_pci_recovery_work(struct work_struct *work) { struct mhi_pci_device *mhi_pdev = container_of(work, struct mhi_pci_device, recovery_work); struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl; struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev); int err; dev_warn(&pdev->dev, "device recovery started\n"); del_timer(&mhi_pdev->health_check_timer); pm_runtime_forbid(&pdev->dev); /* Clean up MHI state */ if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) { mhi_power_down(mhi_cntrl, false); mhi_unprepare_after_power_down(mhi_cntrl); } pci_set_power_state(pdev, PCI_D0); pci_load_saved_state(pdev, mhi_pdev->pci_state); pci_restore_state(pdev); if (!mhi_pci_is_alive(mhi_cntrl)) goto err_try_reset; err = mhi_prepare_for_power_up(mhi_cntrl); if (err) goto err_try_reset; err = mhi_sync_power_up(mhi_cntrl); if (err) goto err_unprepare; dev_dbg(&pdev->dev, "Recovery completed\n"); set_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status); mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD); return; err_unprepare: mhi_unprepare_after_power_down(mhi_cntrl); err_try_reset: if (pci_reset_function(pdev)) dev_err(&pdev->dev, "Recovery failed\n"); } static void health_check(struct timer_list *t) { struct mhi_pci_device *mhi_pdev = from_timer(mhi_pdev, t, health_check_timer); struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl; if (!test_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status) || test_bit(MHI_PCI_DEV_SUSPENDED, &mhi_pdev->status)) return; if (!mhi_pci_is_alive(mhi_cntrl)) { dev_err(mhi_cntrl->cntrl_dev, "Device died\n"); queue_work(system_long_wq, &mhi_pdev->recovery_work); return; } /* reschedule in two seconds */ mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD); } static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { const struct mhi_pci_dev_info *info = (struct mhi_pci_dev_info *) id->driver_data; const struct mhi_controller_config *mhi_cntrl_config; struct mhi_pci_device *mhi_pdev; struct mhi_controller *mhi_cntrl; int err; dev_info(&pdev->dev, "MHI PCI device found: %s\n", info->name); /* mhi_pdev.mhi_cntrl must be zero-initialized */ mhi_pdev = devm_kzalloc(&pdev->dev, sizeof(*mhi_pdev), GFP_KERNEL); if (!mhi_pdev) return -ENOMEM; INIT_WORK(&mhi_pdev->recovery_work, mhi_pci_recovery_work); timer_setup(&mhi_pdev->health_check_timer, health_check, 0); mhi_cntrl_config = info->config; mhi_cntrl = &mhi_pdev->mhi_cntrl; mhi_cntrl->cntrl_dev = &pdev->dev; mhi_cntrl->iova_start = 0; mhi_cntrl->iova_stop = (dma_addr_t)DMA_BIT_MASK(info->dma_data_width); mhi_cntrl->fw_image = info->fw; mhi_cntrl->edl_image = info->edl; mhi_cntrl->read_reg = mhi_pci_read_reg; mhi_cntrl->write_reg = mhi_pci_write_reg; mhi_cntrl->status_cb = mhi_pci_status_cb; mhi_cntrl->runtime_get = mhi_pci_runtime_get; mhi_cntrl->runtime_put = mhi_pci_runtime_put; mhi_cntrl->mru = info->mru_default; if (info->sideband_wake) { mhi_cntrl->wake_get = mhi_pci_wake_get_nop; mhi_cntrl->wake_put = mhi_pci_wake_put_nop; mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop; } err = mhi_pci_claim(mhi_cntrl, info->bar_num, DMA_BIT_MASK(info->dma_data_width)); if (err) return err; err = mhi_pci_get_irqs(mhi_cntrl, mhi_cntrl_config); if (err) return err; pci_set_drvdata(pdev, mhi_pdev); /* Have stored pci confspace at hand for restore in sudden PCI error. * cache the state locally and discard the PCI core one. */ pci_save_state(pdev); mhi_pdev->pci_state = pci_store_saved_state(pdev); pci_load_saved_state(pdev, NULL); err = mhi_register_controller(mhi_cntrl, mhi_cntrl_config); if (err) return err; /* MHI bus does not power up the controller by default */ err = mhi_prepare_for_power_up(mhi_cntrl); if (err) { dev_err(&pdev->dev, "failed to prepare MHI controller\n"); goto err_unregister; } err = mhi_sync_power_up(mhi_cntrl); if (err) { dev_err(&pdev->dev, "failed to power up MHI controller\n"); goto err_unprepare; } set_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status); /* start health check */ mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD); /* Only allow runtime-suspend if PME capable (for wakeup) */ if (pci_pme_capable(pdev, PCI_D3hot)) { pm_runtime_set_autosuspend_delay(&pdev->dev, 2000); pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_mark_last_busy(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); } return 0; err_unprepare: mhi_unprepare_after_power_down(mhi_cntrl); err_unregister: mhi_unregister_controller(mhi_cntrl); return err; } static void mhi_pci_remove(struct pci_dev *pdev) { struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev); struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl; del_timer_sync(&mhi_pdev->health_check_timer); cancel_work_sync(&mhi_pdev->recovery_work); if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) { mhi_power_down(mhi_cntrl, true); mhi_unprepare_after_power_down(mhi_cntrl); } /* balancing probe put_noidle */ if (pci_pme_capable(pdev, PCI_D3hot)) pm_runtime_get_noresume(&pdev->dev); mhi_unregister_controller(mhi_cntrl); } static void mhi_pci_shutdown(struct pci_dev *pdev) { mhi_pci_remove(pdev); pci_set_power_state(pdev, PCI_D3hot); } static void mhi_pci_reset_prepare(struct pci_dev *pdev) { struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev); struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl; dev_info(&pdev->dev, "reset\n"); del_timer(&mhi_pdev->health_check_timer); /* Clean up MHI state */ if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) { mhi_power_down(mhi_cntrl, false); mhi_unprepare_after_power_down(mhi_cntrl); } /* cause internal device reset */ mhi_soc_reset(mhi_cntrl); /* Be sure device reset has been executed */ msleep(MHI_POST_RESET_DELAY_MS); } static void mhi_pci_reset_done(struct pci_dev *pdev) { struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev); struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl; int err; /* Restore initial known working PCI state */ pci_load_saved_state(pdev, mhi_pdev->pci_state); pci_restore_state(pdev); /* Is device status available ? */ if (!mhi_pci_is_alive(mhi_cntrl)) { dev_err(&pdev->dev, "reset failed\n"); return; } err = mhi_prepare_for_power_up(mhi_cntrl); if (err) { dev_err(&pdev->dev, "failed to prepare MHI controller\n"); return; } err = mhi_sync_power_up(mhi_cntrl); if (err) { dev_err(&pdev->dev, "failed to power up MHI controller\n"); mhi_unprepare_after_power_down(mhi_cntrl); return; } set_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status); mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD); } static pci_ers_result_t mhi_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) { struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev); struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl; dev_err(&pdev->dev, "PCI error detected, state = %u\n", state); if (state == pci_channel_io_perm_failure) return PCI_ERS_RESULT_DISCONNECT; /* Clean up MHI state */ if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) { mhi_power_down(mhi_cntrl, false); mhi_unprepare_after_power_down(mhi_cntrl); } else { /* Nothing to do */ return PCI_ERS_RESULT_RECOVERED; } pci_disable_device(pdev); return PCI_ERS_RESULT_NEED_RESET; } static pci_ers_result_t mhi_pci_slot_reset(struct pci_dev *pdev) { if (pci_enable_device(pdev)) { dev_err(&pdev->dev, "Cannot re-enable PCI device after reset.\n"); return PCI_ERS_RESULT_DISCONNECT; } return PCI_ERS_RESULT_RECOVERED; } static void mhi_pci_io_resume(struct pci_dev *pdev) { struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev); dev_err(&pdev->dev, "PCI slot reset done\n"); queue_work(system_long_wq, &mhi_pdev->recovery_work); } static const struct pci_error_handlers mhi_pci_err_handler = { .error_detected = mhi_pci_error_detected, .slot_reset = mhi_pci_slot_reset, .resume = mhi_pci_io_resume, .reset_prepare = mhi_pci_reset_prepare, .reset_done = mhi_pci_reset_done, }; static int __maybe_unused mhi_pci_runtime_suspend(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev); struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl; int err; if (test_and_set_bit(MHI_PCI_DEV_SUSPENDED, &mhi_pdev->status)) return 0; del_timer(&mhi_pdev->health_check_timer); cancel_work_sync(&mhi_pdev->recovery_work); if (!test_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status) || mhi_cntrl->ee != MHI_EE_AMSS) goto pci_suspend; /* Nothing to do at MHI level */ /* Transition to M3 state */ err = mhi_pm_suspend(mhi_cntrl); if (err) { dev_err(&pdev->dev, "failed to suspend device: %d\n", err); clear_bit(MHI_PCI_DEV_SUSPENDED, &mhi_pdev->status); return -EBUSY; } pci_suspend: pci_disable_device(pdev); pci_wake_from_d3(pdev, true); return 0; } static int __maybe_unused mhi_pci_runtime_resume(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev); struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl; int err; if (!test_and_clear_bit(MHI_PCI_DEV_SUSPENDED, &mhi_pdev->status)) return 0; err = pci_enable_device(pdev); if (err) goto err_recovery; pci_set_master(pdev); pci_wake_from_d3(pdev, false); if (!test_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status) || mhi_cntrl->ee != MHI_EE_AMSS) return 0; /* Nothing to do at MHI level */ /* Exit M3, transition to M0 state */ err = mhi_pm_resume(mhi_cntrl); if (err) { dev_err(&pdev->dev, "failed to resume device: %d\n", err); goto err_recovery; } /* Resume health check */ mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD); /* It can be a remote wakeup (no mhi runtime_get), update access time */ pm_runtime_mark_last_busy(dev); return 0; err_recovery: /* Do not fail to not mess up our PCI device state, the device likely * lost power (d3cold) and we simply need to reset it from the recovery * procedure, trigger the recovery asynchronously to prevent system * suspend exit delaying. */ queue_work(system_long_wq, &mhi_pdev->recovery_work); pm_runtime_mark_last_busy(dev); return 0; } static int __maybe_unused mhi_pci_suspend(struct device *dev) { pm_runtime_disable(dev); return mhi_pci_runtime_suspend(dev); } static int __maybe_unused mhi_pci_resume(struct device *dev) { int ret; /* Depending the platform, device may have lost power (d3cold), we need * to resume it now to check its state and recover when necessary. */ ret = mhi_pci_runtime_resume(dev); pm_runtime_enable(dev); return ret; } static int __maybe_unused mhi_pci_freeze(struct device *dev) { struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev); struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl; /* We want to stop all operations, hibernation does not guarantee that * device will be in the same state as before freezing, especially if * the intermediate restore kernel reinitializes MHI device with new * context. */ flush_work(&mhi_pdev->recovery_work); if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) { mhi_power_down(mhi_cntrl, true); mhi_unprepare_after_power_down(mhi_cntrl); } return 0; } static int __maybe_unused mhi_pci_restore(struct device *dev) { struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev); /* Reinitialize the device */ queue_work(system_long_wq, &mhi_pdev->recovery_work); return 0; } static const struct dev_pm_ops mhi_pci_pm_ops = { SET_RUNTIME_PM_OPS(mhi_pci_runtime_suspend, mhi_pci_runtime_resume, NULL) #ifdef CONFIG_PM_SLEEP .suspend = mhi_pci_suspend, .resume = mhi_pci_resume, .freeze = mhi_pci_freeze, .thaw = mhi_pci_restore, .poweroff = mhi_pci_freeze, .restore = mhi_pci_restore, #endif }; static struct pci_driver mhi_pci_driver = { .name = "mhi-pci-generic", .id_table = mhi_pci_id_table, .probe = mhi_pci_probe, .remove = mhi_pci_remove, .shutdown = mhi_pci_shutdown, .err_handler = &mhi_pci_err_handler, .driver.pm = &mhi_pci_pm_ops }; module_pci_driver(mhi_pci_driver); MODULE_AUTHOR("Loic Poulain <loic.poulain@linaro.org>"); MODULE_DESCRIPTION("Modem Host Interface (MHI) PCI controller driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1