| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Nipun Gupta | 1176 | 100.00% | 1 | 100.00% |
| Total | 1176 | 1 |
/* SPDX-License-Identifier: GPL-2.0 * * Driver for AMD network controllers and boards * * Copyright (C) 2021, Xilinx, Inc. * Copyright (C) 2022-2023, Advanced Micro Devices, Inc. */ #ifndef MC_CDX_PCOL_H #define MC_CDX_PCOL_H /* The current version of the MCDI protocol. */ #define MCDI_PCOL_VERSION 2 /* * Each MCDI request starts with an MCDI_HEADER, which is a 32bit * structure, filled in by the client. * * 0 7 8 16 20 22 23 24 31 * | CODE | R | LEN | SEQ | Rsvd | E | R | XFLAGS | * | | | * | | \--- Response * | \------- Error * \------------------------------ Resync (always set) * * The client writes its request into MC shared memory, and rings the * doorbell. Each request is completed either by the MC writing * back into shared memory, or by writing out an event. * * All MCDI commands support completion by shared memory response. Each * request may also contain additional data (accounted for by HEADER.LEN), * and some responses may also contain additional data (again, accounted * for by HEADER.LEN). * * Some MCDI commands support completion by event, in which any associated * response data is included in the event. * * The protocol requires one response to be delivered for every request; a * request should not be sent unless the response for the previous request * has been received (either by polling shared memory, or by receiving * an event). */ /** Request/Response structure */ #define MCDI_HEADER_OFST 0 #define MCDI_HEADER_CODE_LBN 0 #define MCDI_HEADER_CODE_WIDTH 7 #define MCDI_HEADER_RESYNC_LBN 7 #define MCDI_HEADER_RESYNC_WIDTH 1 #define MCDI_HEADER_DATALEN_LBN 8 #define MCDI_HEADER_DATALEN_WIDTH 8 #define MCDI_HEADER_SEQ_LBN 16 #define MCDI_HEADER_SEQ_WIDTH 4 #define MCDI_HEADER_RSVD_LBN 20 #define MCDI_HEADER_RSVD_WIDTH 1 #define MCDI_HEADER_NOT_EPOCH_LBN 21 #define MCDI_HEADER_NOT_EPOCH_WIDTH 1 #define MCDI_HEADER_ERROR_LBN 22 #define MCDI_HEADER_ERROR_WIDTH 1 #define MCDI_HEADER_RESPONSE_LBN 23 #define MCDI_HEADER_RESPONSE_WIDTH 1 #define MCDI_HEADER_XFLAGS_LBN 24 #define MCDI_HEADER_XFLAGS_WIDTH 8 /* Request response using event */ #define MCDI_HEADER_XFLAGS_EVREQ 0x01 /* Request (and signal) early doorbell return */ #define MCDI_HEADER_XFLAGS_DBRET 0x02 /* Maximum number of payload bytes */ #define MCDI_CTL_SDU_LEN_MAX_V2 0x400 #define MCDI_CTL_SDU_LEN_MAX MCDI_CTL_SDU_LEN_MAX_V2 /* * The MC can generate events for two reasons: * - To advance a shared memory request if XFLAGS_EVREQ was set * - As a notification (link state, i2c event), controlled * via MC_CMD_LOG_CTRL * * Both events share a common structure: * * 0 32 33 36 44 52 60 * | Data | Cont | Level | Src | Code | Rsvd | * | * \ There is another event pending in this notification * * If Code==CMDDONE, then the fields are further interpreted as: * * - LEVEL==INFO Command succeeded * - LEVEL==ERR Command failed * * 0 8 16 24 32 * | Seq | Datalen | Errno | Rsvd | * * These fields are taken directly out of the standard MCDI header, i.e., * LEVEL==ERR, Datalen == 0 => Reboot * * Events can be squirted out of the UART (using LOG_CTRL) without a * MCDI header. An event can be distinguished from a MCDI response by * examining the first byte which is 0xc0. This corresponds to the * non-existent MCDI command MC_CMD_DEBUG_LOG. * * 0 7 8 * | command | Resync | = 0xc0 * * Since the event is written in big-endian byte order, this works * providing bits 56-63 of the event are 0xc0. * * 56 60 63 * | Rsvd | Code | = 0xc0 * * Which means for convenience the event code is 0xc for all MC * generated events. */ /* * the errno value may be followed by the (0-based) number of the * first argument that could not be processed. */ #define MC_CMD_ERR_ARG_OFST 4 /* MC_CMD_ERR MCDI error codes. */ /* Operation not permitted. */ #define MC_CMD_ERR_EPERM 0x1 /* Non-existent command target */ #define MC_CMD_ERR_ENOENT 0x2 /* assert() has killed the MC */ #define MC_CMD_ERR_EINTR 0x4 /* I/O failure */ #define MC_CMD_ERR_EIO 0x5 /* Already exists */ #define MC_CMD_ERR_EEXIST 0x6 /* Try again */ #define MC_CMD_ERR_EAGAIN 0xb /* Out of memory */ #define MC_CMD_ERR_ENOMEM 0xc /* Caller does not hold required locks */ #define MC_CMD_ERR_EACCES 0xd /* Resource is currently unavailable (e.g. lock contention) */ #define MC_CMD_ERR_EBUSY 0x10 /* No such device */ #define MC_CMD_ERR_ENODEV 0x13 /* Invalid argument to target */ #define MC_CMD_ERR_EINVAL 0x16 /* No space */ #define MC_CMD_ERR_ENOSPC 0x1c /* Read-only */ #define MC_CMD_ERR_EROFS 0x1e /* Broken pipe */ #define MC_CMD_ERR_EPIPE 0x20 /* Out of range */ #define MC_CMD_ERR_ERANGE 0x22 /* Non-recursive resource is already acquired */ #define MC_CMD_ERR_EDEADLK 0x23 /* Operation not implemented */ #define MC_CMD_ERR_ENOSYS 0x26 /* Operation timed out */ #define MC_CMD_ERR_ETIME 0x3e /* Link has been severed */ #define MC_CMD_ERR_ENOLINK 0x43 /* Protocol error */ #define MC_CMD_ERR_EPROTO 0x47 /* Bad message */ #define MC_CMD_ERR_EBADMSG 0x4a /* Operation not supported */ #define MC_CMD_ERR_ENOTSUP 0x5f /* Address not available */ #define MC_CMD_ERR_EADDRNOTAVAIL 0x63 /* Not connected */ #define MC_CMD_ERR_ENOTCONN 0x6b /* Operation already in progress */ #define MC_CMD_ERR_EALREADY 0x72 /* Stale handle. The handle references resource that no longer exists */ #define MC_CMD_ERR_ESTALE 0x74 /* Resource allocation failed. */ #define MC_CMD_ERR_ALLOC_FAIL 0x1000 /* V-adaptor not found. */ #define MC_CMD_ERR_NO_VADAPTOR 0x1001 /* EVB port not found. */ #define MC_CMD_ERR_NO_EVB_PORT 0x1002 /* V-switch not found. */ #define MC_CMD_ERR_NO_VSWITCH 0x1003 /* Too many VLAN tags. */ #define MC_CMD_ERR_VLAN_LIMIT 0x1004 /* Bad PCI function number. */ #define MC_CMD_ERR_BAD_PCI_FUNC 0x1005 /* Invalid VLAN mode. */ #define MC_CMD_ERR_BAD_VLAN_MODE 0x1006 /* Invalid v-switch type. */ #define MC_CMD_ERR_BAD_VSWITCH_TYPE 0x1007 /* Invalid v-port type. */ #define MC_CMD_ERR_BAD_VPORT_TYPE 0x1008 /* MAC address exists. */ #define MC_CMD_ERR_MAC_EXIST 0x1009 /* Slave core not present */ #define MC_CMD_ERR_SLAVE_NOT_PRESENT 0x100a /* The datapath is disabled. */ #define MC_CMD_ERR_DATAPATH_DISABLED 0x100b /* The requesting client is not a function */ #define MC_CMD_ERR_CLIENT_NOT_FN 0x100c /* * The requested operation might require the command to be passed between * MCs, and the transport doesn't support that. Should only ever been seen over * the UART. */ #define MC_CMD_ERR_NO_PRIVILEGE 0x1013 /* * Workaround 26807 could not be turned on/off because some functions * have already installed filters. See the comment at * MC_CMD_WORKAROUND_BUG26807. May also returned for other operations such as * sub-variant switching. */ #define MC_CMD_ERR_FILTERS_PRESENT 0x1014 /* The clock whose frequency you've attempted to set doesn't exist */ #define MC_CMD_ERR_NO_CLOCK 0x1015 /* * Returned by MC_CMD_TESTASSERT if the action that should have caused an * assertion failed to do so. */ #define MC_CMD_ERR_UNREACHABLE 0x1016 /* * This command needs to be processed in the background but there were no * resources to do so. Send it again after a command has completed. */ #define MC_CMD_ERR_QUEUE_FULL 0x1017 /* * The operation could not be completed because the PCIe link has gone * away. This error code is never expected to be returned over the TLP * transport. */ #define MC_CMD_ERR_NO_PCIE 0x1018 /* * The operation could not be completed because the datapath has gone * away. This is distinct from MC_CMD_ERR_DATAPATH_DISABLED in that the * datapath absence may be temporary */ #define MC_CMD_ERR_NO_DATAPATH 0x1019 /* The operation could not complete because some VIs are allocated */ #define MC_CMD_ERR_VIS_PRESENT 0x101a /* * The operation could not complete because some PIO buffers are * allocated */ #define MC_CMD_ERR_PIOBUFS_PRESENT 0x101b /***********************************/ /* * MC_CMD_CDX_BUS_ENUM_BUSES * CDX bus hosts devices (functions) that are implemented using the Composable * DMA subsystem and directly mapped into the memory space of the FGPA PSX * Application Processors (APUs). As such, they only apply to the PSX APU side, * not the host (PCIe). Unlike PCIe, these devices have no native configuration * space or enumeration mechanism, so this message set provides a minimal * interface for discovery and management (bus reset, FLR, BME) of such * devices. This command returns the number of CDX buses present in the system. */ #define MC_CMD_CDX_BUS_ENUM_BUSES 0x1 #define MC_CMD_CDX_BUS_ENUM_BUSES_MSGSET 0x1 #undef MC_CMD_0x1_PRIVILEGE_CTG #define MC_CMD_0x1_PRIVILEGE_CTG SRIOV_CTG_ADMIN /* MC_CMD_CDX_BUS_ENUM_BUSES_IN msgrequest */ #define MC_CMD_CDX_BUS_ENUM_BUSES_IN_LEN 0 /* MC_CMD_CDX_BUS_ENUM_BUSES_OUT msgresponse */ #define MC_CMD_CDX_BUS_ENUM_BUSES_OUT_LEN 4 /* * Number of CDX buses present in the system. Buses are numbered 0 to * BUS_COUNT-1 */ #define MC_CMD_CDX_BUS_ENUM_BUSES_OUT_BUS_COUNT_OFST 0 #define MC_CMD_CDX_BUS_ENUM_BUSES_OUT_BUS_COUNT_LEN 4 /***********************************/ /* * MC_CMD_CDX_BUS_ENUM_DEVICES * Enumerate CDX bus devices on a given bus */ #define MC_CMD_CDX_BUS_ENUM_DEVICES 0x2 #define MC_CMD_CDX_BUS_ENUM_DEVICES_MSGSET 0x2 #undef MC_CMD_0x2_PRIVILEGE_CTG #define MC_CMD_0x2_PRIVILEGE_CTG SRIOV_CTG_ADMIN /* MC_CMD_CDX_BUS_ENUM_DEVICES_IN msgrequest */ #define MC_CMD_CDX_BUS_ENUM_DEVICES_IN_LEN 4 /* * Bus number to enumerate, in range 0 to BUS_COUNT-1, as returned by * MC_CMD_CDX_BUS_ENUM_BUSES_OUT */ #define MC_CMD_CDX_BUS_ENUM_DEVICES_IN_BUS_OFST 0 #define MC_CMD_CDX_BUS_ENUM_DEVICES_IN_BUS_LEN 4 /* MC_CMD_CDX_BUS_ENUM_DEVICES_OUT msgresponse */ #define MC_CMD_CDX_BUS_ENUM_DEVICES_OUT_LEN 4 /* * Number of devices present on the bus. Devices on the bus are numbered 0 to * DEVICE_COUNT-1. Returns EAGAIN if number of devices unknown or if the target * devices are not ready (e.g. undergoing a bus reset) */ #define MC_CMD_CDX_BUS_ENUM_DEVICES_OUT_DEVICE_COUNT_OFST 0 #define MC_CMD_CDX_BUS_ENUM_DEVICES_OUT_DEVICE_COUNT_LEN 4 /***********************************/ /* * MC_CMD_CDX_BUS_GET_DEVICE_CONFIG * Returns device identification and MMIO/MSI resource data for a CDX device. * The expected usage is for the caller to first retrieve the number of devices * on the bus using MC_CMD_BUS_ENUM_DEVICES, then loop through the range (0, * DEVICE_COUNT - 1), retrieving device resource data. May return EAGAIN if the * number of exposed devices or device resources change during enumeration (due * to e.g. a PL reload / bus reset), in which case the caller is expected to * restart the enumeration loop. MMIO addresses are specified in terms of bus * addresses (prior to any potential IOMMU translation). For versal-net, these * are equivalent to APU physical addresses. Implementation note - for this to * work, the implementation needs to keep state (generation count) per client. */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG 0x3 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_MSGSET 0x3 #undef MC_CMD_0x3_PRIVILEGE_CTG #define MC_CMD_0x3_PRIVILEGE_CTG SRIOV_CTG_ADMIN /* MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN msgrequest */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_LEN 8 /* Device bus number, in range 0 to BUS_COUNT-1 */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_BUS_OFST 0 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_BUS_LEN 4 /* Device number relative to the bus, in range 0 to DEVICE_COUNT-1 for that bus */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_DEVICE_OFST 4 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_DEVICE_LEN 4 /* MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT msgresponse */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_LEN 88 /* 16-bit Vendor identifier, compliant with PCI-SIG VendorID assignment. */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_VENDOR_ID_OFST 0 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_VENDOR_ID_LEN 2 /* 16-bit Device ID assigned by the vendor */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_ID_OFST 2 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_ID_LEN 2 /* * 16-bit Subsystem Vendor ID, , compliant with PCI-SIG VendorID assignment. * For further device differentiation, as required. 0 if unused. */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_SUBSYS_VENDOR_ID_OFST 4 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_SUBSYS_VENDOR_ID_LEN 2 /* * 16-bit Subsystem Device ID assigned by the vendor. For further device * differentiation, as required. 0 if unused. */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_SUBSYS_DEVICE_ID_OFST 6 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_SUBSYS_DEVICE_ID_LEN 2 /* 24-bit Device Class code, compliant with PCI-SIG Device Class codes */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_CLASS_OFST 8 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_CLASS_LEN 3 /* 8-bit vendor-assigned revision */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_REVISION_OFST 11 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_REVISION_LEN 1 /* Reserved (alignment) */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_RESERVED_OFST 12 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_RESERVED_LEN 4 /* MMIO region 0 base address (bus address), 0 if unused */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_OFST 16 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_LEN 8 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_LO_OFST 16 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_LO_LEN 4 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_LO_LBN 128 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_LO_WIDTH 32 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_HI_OFST 20 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_HI_LEN 4 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_HI_LBN 160 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_HI_WIDTH 32 /* MMIO region 0 size, 0 if unused */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_OFST 24 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_LEN 8 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_LO_OFST 24 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_LO_LEN 4 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_LO_LBN 192 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_LO_WIDTH 32 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_HI_OFST 28 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_HI_LEN 4 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_HI_LBN 224 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_HI_WIDTH 32 /* MMIO region 1 base address (bus address), 0 if unused */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_OFST 32 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_LEN 8 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_LO_OFST 32 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_LO_LEN 4 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_LO_LBN 256 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_LO_WIDTH 32 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_HI_OFST 36 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_HI_LEN 4 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_HI_LBN 288 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_HI_WIDTH 32 /* MMIO region 1 size, 0 if unused */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_OFST 40 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_LEN 8 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_LO_OFST 40 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_LO_LEN 4 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_LO_LBN 320 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_LO_WIDTH 32 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_HI_OFST 44 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_HI_LEN 4 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_HI_LBN 352 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_HI_WIDTH 32 /* MMIO region 2 base address (bus address), 0 if unused */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_OFST 48 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_LEN 8 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_LO_OFST 48 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_LO_LEN 4 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_LO_LBN 384 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_LO_WIDTH 32 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_HI_OFST 52 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_HI_LEN 4 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_HI_LBN 416 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_HI_WIDTH 32 /* MMIO region 2 size, 0 if unused */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_OFST 56 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_LEN 8 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_LO_OFST 56 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_LO_LEN 4 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_LO_LBN 448 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_LO_WIDTH 32 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_HI_OFST 60 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_HI_LEN 4 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_HI_LBN 480 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_HI_WIDTH 32 /* MMIO region 3 base address (bus address), 0 if unused */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_OFST 64 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_LEN 8 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_LO_OFST 64 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_LO_LEN 4 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_LO_LBN 512 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_LO_WIDTH 32 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_HI_OFST 68 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_HI_LEN 4 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_HI_LBN 544 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_HI_WIDTH 32 /* MMIO region 3 size, 0 if unused */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_OFST 72 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_LEN 8 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_LO_OFST 72 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_LO_LEN 4 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_LO_LBN 576 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_LO_WIDTH 32 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_HI_OFST 76 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_HI_LEN 4 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_HI_LBN 608 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_HI_WIDTH 32 /* MSI vector count */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MSI_COUNT_OFST 80 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MSI_COUNT_LEN 4 /* Requester ID used by device (SMMU StreamID, GIC ITS DeviceID) */ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_REQUESTER_ID_OFST 84 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_REQUESTER_ID_LEN 4 /***********************************/ /* * MC_CMD_CDX_DEVICE_RESET * After this call completes, device DMA and interrupts are quiesced, devices * logic is reset in a hardware-specific way and DMA bus mastering is disabled. */ #define MC_CMD_CDX_DEVICE_RESET 0x6 #define MC_CMD_CDX_DEVICE_RESET_MSGSET 0x6 #undef MC_CMD_0x6_PRIVILEGE_CTG #define MC_CMD_0x6_PRIVILEGE_CTG SRIOV_CTG_ADMIN /* MC_CMD_CDX_DEVICE_RESET_IN msgrequest */ #define MC_CMD_CDX_DEVICE_RESET_IN_LEN 8 /* Device bus number, in range 0 to BUS_COUNT-1 */ #define MC_CMD_CDX_DEVICE_RESET_IN_BUS_OFST 0 #define MC_CMD_CDX_DEVICE_RESET_IN_BUS_LEN 4 /* Device number relative to the bus, in range 0 to DEVICE_COUNT-1 for that bus */ #define MC_CMD_CDX_DEVICE_RESET_IN_DEVICE_OFST 4 #define MC_CMD_CDX_DEVICE_RESET_IN_DEVICE_LEN 4 /* * MC_CMD_CDX_DEVICE_RESET_OUT msgresponse: The device is quiesced and all * pending device initiated DMA has completed. */ #define MC_CMD_CDX_DEVICE_RESET_OUT_LEN 0 /***********************************/ /* * MC_CMD_CDX_DEVICE_CONTROL_SET * If BUS_MASTER is set to disabled, device DMA and interrupts are quiesced. * Pending DMA requests and MSI interrupts are flushed and no further DMA or * interrupts are issued after this command returns. If BUS_MASTER is set to * enabled, device is allowed to initiate DMA. Whether interrupts are enabled * also depends on the value of MSI_ENABLE bit. Note that, in this case, the * device may start DMA before the host receives and processes the MCDI * response. MSI_ENABLE masks or unmasks device interrupts only. Note that for * interrupts to be delivered to the host, both BUS_MASTER and MSI_ENABLE needs * to be set. MMIO_REGIONS_ENABLE enables or disables host accesses to device * MMIO regions. Note that an implementation is allowed to permanently set this * bit to 1, in which case MC_CMD_CDX_DEVICE_CONTROL_GET will always return 1 * for this bit, regardless of the value set here. */ #define MC_CMD_CDX_DEVICE_CONTROL_SET 0x7 #define MC_CMD_CDX_DEVICE_CONTROL_SET_MSGSET 0x7 #undef MC_CMD_0x7_PRIVILEGE_CTG #define MC_CMD_0x7_PRIVILEGE_CTG SRIOV_CTG_ADMIN /* MC_CMD_CDX_DEVICE_CONTROL_SET_IN msgrequest */ #define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_LEN 12 /* Device bus number, in range 0 to BUS_COUNT-1 */ #define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_OFST 0 #define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_LEN 4 /* Device number relative to the bus, in range 0 to DEVICE_COUNT-1 for that bus */ #define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_DEVICE_OFST 4 #define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_DEVICE_LEN 4 #define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_FLAGS_OFST 8 #define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_FLAGS_LEN 4 #define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_MASTER_ENABLE_OFST 8 #define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_MASTER_ENABLE_LBN 0 #define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_MASTER_ENABLE_WIDTH 1 #define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MSI_ENABLE_OFST 8 #define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MSI_ENABLE_LBN 1 #define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MSI_ENABLE_WIDTH 1 #define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MMIO_REGIONS_ENABLE_OFST 8 #define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MMIO_REGIONS_ENABLE_LBN 2 #define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MMIO_REGIONS_ENABLE_WIDTH 1 /* MC_CMD_CDX_DEVICE_CONTROL_SET_OUT msgresponse */ #define MC_CMD_CDX_DEVICE_CONTROL_SET_OUT_LEN 0 /***********************************/ /* * MC_CMD_CDX_DEVICE_CONTROL_GET * Returns device DMA, interrupt and MMIO region access control bits. See * MC_CMD_CDX_DEVICE_CONTROL_SET for definition of the available control bits. */ #define MC_CMD_CDX_DEVICE_CONTROL_GET 0x8 #define MC_CMD_CDX_DEVICE_CONTROL_GET_MSGSET 0x8 #undef MC_CMD_0x8_PRIVILEGE_CTG #define MC_CMD_0x8_PRIVILEGE_CTG SRIOV_CTG_ADMIN /* MC_CMD_CDX_DEVICE_CONTROL_GET_IN msgrequest */ #define MC_CMD_CDX_DEVICE_CONTROL_GET_IN_LEN 8 /* Device bus number, in range 0 to BUS_COUNT-1 */ #define MC_CMD_CDX_DEVICE_CONTROL_GET_IN_BUS_OFST 0 #define MC_CMD_CDX_DEVICE_CONTROL_GET_IN_BUS_LEN 4 /* Device number relative to the bus, in range 0 to DEVICE_COUNT-1 for that bus */ #define MC_CMD_CDX_DEVICE_CONTROL_GET_IN_DEVICE_OFST 4 #define MC_CMD_CDX_DEVICE_CONTROL_GET_IN_DEVICE_LEN 4 /* MC_CMD_CDX_DEVICE_CONTROL_GET_OUT msgresponse */ #define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_LEN 4 #define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_FLAGS_OFST 0 #define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_FLAGS_LEN 4 #define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_BUS_MASTER_ENABLE_OFST 0 #define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_BUS_MASTER_ENABLE_LBN 0 #define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_BUS_MASTER_ENABLE_WIDTH 1 #define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MSI_ENABLE_OFST 0 #define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MSI_ENABLE_LBN 1 #define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MSI_ENABLE_WIDTH 1 #define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MMIO_REGIONS_ENABLE_OFST 0 #define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MMIO_REGIONS_ENABLE_LBN 2 #define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MMIO_REGIONS_ENABLE_WIDTH 1 /***********************************/ /* MC_CMD_V2_EXTN - Encapsulation for a v2 extended command */ #define MC_CMD_V2_EXTN 0x7f /* MC_CMD_V2_EXTN_IN msgrequest */ #define MC_CMD_V2_EXTN_IN_LEN 4 /* the extended command number */ #define MC_CMD_V2_EXTN_IN_EXTENDED_CMD_LBN 0 #define MC_CMD_V2_EXTN_IN_EXTENDED_CMD_WIDTH 15 #define MC_CMD_V2_EXTN_IN_UNUSED_LBN 15 #define MC_CMD_V2_EXTN_IN_UNUSED_WIDTH 1 /* the actual length of the encapsulated command */ #define MC_CMD_V2_EXTN_IN_ACTUAL_LEN_LBN 16 #define MC_CMD_V2_EXTN_IN_ACTUAL_LEN_WIDTH 10 #define MC_CMD_V2_EXTN_IN_UNUSED2_LBN 26 #define MC_CMD_V2_EXTN_IN_UNUSED2_WIDTH 2 /* Type of command/response */ #define MC_CMD_V2_EXTN_IN_MESSAGE_TYPE_LBN 28 #define MC_CMD_V2_EXTN_IN_MESSAGE_TYPE_WIDTH 4 /* * enum: MCDI command directed to versal-net. MCDI responses of this type * are not defined. */ #define MC_CMD_V2_EXTN_IN_MCDI_MESSAGE_TYPE_PLATFORM 0x2 #endif /* MC_CDX_PCOL_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1