Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Anup Patel | 990 | 95.01% | 3 | 37.50% |
Palmer Dabbelt | 39 | 3.74% | 3 | 37.50% |
Christoph Hellwig | 8 | 0.77% | 1 | 12.50% |
Greentime Hu | 5 | 0.48% | 1 | 12.50% |
Total | 1042 | 8 |
// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2020 Western Digital Corporation or its affiliates. * * Most of the M-mode (i.e. NoMMU) RISC-V systems usually have a * CLINT MMIO timer device. */ #define pr_fmt(fmt) "clint: " fmt #include <linux/bitops.h> #include <linux/clocksource.h> #include <linux/clockchips.h> #include <linux/cpu.h> #include <linux/delay.h> #include <linux/module.h> #include <linux/of_address.h> #include <linux/sched_clock.h> #include <linux/io-64-nonatomic-lo-hi.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/irqchip/chained_irq.h> #include <linux/irqdomain.h> #include <linux/of_irq.h> #include <linux/smp.h> #include <linux/timex.h> #ifndef CONFIG_RISCV_M_MODE #include <asm/clint.h> #endif #define CLINT_IPI_OFF 0 #define CLINT_TIMER_CMP_OFF 0x4000 #define CLINT_TIMER_VAL_OFF 0xbff8 /* CLINT manages IPI and Timer for RISC-V M-mode */ static u32 __iomem *clint_ipi_base; static unsigned int clint_ipi_irq; static u64 __iomem *clint_timer_cmp; static u64 __iomem *clint_timer_val; static unsigned long clint_timer_freq; static unsigned int clint_timer_irq; #ifdef CONFIG_RISCV_M_MODE u64 __iomem *clint_time_val; EXPORT_SYMBOL(clint_time_val); #endif #ifdef CONFIG_SMP static void clint_send_ipi(unsigned int cpu) { writel(1, clint_ipi_base + cpuid_to_hartid_map(cpu)); } static void clint_clear_ipi(void) { writel(0, clint_ipi_base + cpuid_to_hartid_map(smp_processor_id())); } static void clint_ipi_interrupt(struct irq_desc *desc) { struct irq_chip *chip = irq_desc_get_chip(desc); chained_irq_enter(chip, desc); clint_clear_ipi(); ipi_mux_process(); chained_irq_exit(chip, desc); } #endif #ifdef CONFIG_64BIT #define clint_get_cycles() readq_relaxed(clint_timer_val) #else #define clint_get_cycles() readl_relaxed(clint_timer_val) #define clint_get_cycles_hi() readl_relaxed(((u32 *)clint_timer_val) + 1) #endif #ifdef CONFIG_64BIT static u64 notrace clint_get_cycles64(void) { return clint_get_cycles(); } #else /* CONFIG_64BIT */ static u64 notrace clint_get_cycles64(void) { u32 hi, lo; do { hi = clint_get_cycles_hi(); lo = clint_get_cycles(); } while (hi != clint_get_cycles_hi()); return ((u64)hi << 32) | lo; } #endif /* CONFIG_64BIT */ static u64 clint_rdtime(struct clocksource *cs) { return clint_get_cycles64(); } static struct clocksource clint_clocksource = { .name = "clint_clocksource", .rating = 300, .mask = CLOCKSOURCE_MASK(64), .flags = CLOCK_SOURCE_IS_CONTINUOUS, .read = clint_rdtime, }; static int clint_clock_next_event(unsigned long delta, struct clock_event_device *ce) { void __iomem *r = clint_timer_cmp + cpuid_to_hartid_map(smp_processor_id()); csr_set(CSR_IE, IE_TIE); writeq_relaxed(clint_get_cycles64() + delta, r); return 0; } static DEFINE_PER_CPU(struct clock_event_device, clint_clock_event) = { .name = "clint_clockevent", .features = CLOCK_EVT_FEAT_ONESHOT, .rating = 100, .set_next_event = clint_clock_next_event, }; static int clint_timer_starting_cpu(unsigned int cpu) { struct clock_event_device *ce = per_cpu_ptr(&clint_clock_event, cpu); ce->cpumask = cpumask_of(cpu); clockevents_config_and_register(ce, clint_timer_freq, 100, 0x7fffffff); enable_percpu_irq(clint_timer_irq, irq_get_trigger_type(clint_timer_irq)); enable_percpu_irq(clint_ipi_irq, irq_get_trigger_type(clint_ipi_irq)); return 0; } static int clint_timer_dying_cpu(unsigned int cpu) { disable_percpu_irq(clint_timer_irq); /* * Don't disable IPI when CPU goes offline because * the masking/unmasking of virtual IPIs is done * via generic IPI-Mux */ return 0; } static irqreturn_t clint_timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evdev = this_cpu_ptr(&clint_clock_event); csr_clear(CSR_IE, IE_TIE); evdev->event_handler(evdev); return IRQ_HANDLED; } static int __init clint_timer_init_dt(struct device_node *np) { int rc; u32 i, nr_irqs; void __iomem *base; struct of_phandle_args oirq; /* * Ensure that CLINT device interrupts are either RV_IRQ_TIMER or * RV_IRQ_SOFT. If it's anything else then we ignore the device. */ nr_irqs = of_irq_count(np); for (i = 0; i < nr_irqs; i++) { if (of_irq_parse_one(np, i, &oirq)) { pr_err("%pOFP: failed to parse irq %d.\n", np, i); continue; } if ((oirq.args_count != 1) || (oirq.args[0] != RV_IRQ_TIMER && oirq.args[0] != RV_IRQ_SOFT)) { pr_err("%pOFP: invalid irq %d (hwirq %d)\n", np, i, oirq.args[0]); return -ENODEV; } /* Find parent irq domain and map ipi irq */ if (!clint_ipi_irq && oirq.args[0] == RV_IRQ_SOFT && irq_find_host(oirq.np)) clint_ipi_irq = irq_of_parse_and_map(np, i); /* Find parent irq domain and map timer irq */ if (!clint_timer_irq && oirq.args[0] == RV_IRQ_TIMER && irq_find_host(oirq.np)) clint_timer_irq = irq_of_parse_and_map(np, i); } /* If CLINT ipi or timer irq not found then fail */ if (!clint_ipi_irq || !clint_timer_irq) { pr_err("%pOFP: ipi/timer irq not found\n", np); return -ENODEV; } base = of_iomap(np, 0); if (!base) { pr_err("%pOFP: could not map registers\n", np); return -ENODEV; } clint_ipi_base = base + CLINT_IPI_OFF; clint_timer_cmp = base + CLINT_TIMER_CMP_OFF; clint_timer_val = base + CLINT_TIMER_VAL_OFF; clint_timer_freq = riscv_timebase; #ifdef CONFIG_RISCV_M_MODE /* * Yes, that's an odd naming scheme. time_val is public, but hopefully * will die in favor of something cleaner. */ clint_time_val = clint_timer_val; #endif pr_info("%pOFP: timer running at %ld Hz\n", np, clint_timer_freq); rc = clocksource_register_hz(&clint_clocksource, clint_timer_freq); if (rc) { pr_err("%pOFP: clocksource register failed [%d]\n", np, rc); goto fail_iounmap; } sched_clock_register(clint_get_cycles64, 64, clint_timer_freq); rc = request_percpu_irq(clint_timer_irq, clint_timer_interrupt, "clint-timer", &clint_clock_event); if (rc) { pr_err("registering percpu irq failed [%d]\n", rc); goto fail_iounmap; } #ifdef CONFIG_SMP rc = ipi_mux_create(BITS_PER_BYTE, clint_send_ipi); if (rc <= 0) { pr_err("unable to create muxed IPIs\n"); rc = (rc < 0) ? rc : -ENODEV; goto fail_free_irq; } irq_set_chained_handler(clint_ipi_irq, clint_ipi_interrupt); riscv_ipi_set_virq_range(rc, BITS_PER_BYTE, true); clint_clear_ipi(); #endif rc = cpuhp_setup_state(CPUHP_AP_CLINT_TIMER_STARTING, "clockevents/clint/timer:starting", clint_timer_starting_cpu, clint_timer_dying_cpu); if (rc) { pr_err("%pOFP: cpuhp setup state failed [%d]\n", np, rc); goto fail_free_irq; } return 0; fail_free_irq: free_percpu_irq(clint_timer_irq, &clint_clock_event); fail_iounmap: iounmap(base); return rc; } TIMER_OF_DECLARE(clint_timer, "riscv,clint0", clint_timer_init_dt); TIMER_OF_DECLARE(clint_timer1, "sifive,clint0", clint_timer_init_dt);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1