Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Michael Hennerich | 1405 | 99.22% | 1 | 16.67% |
Peter Rosin | 6 | 0.42% | 1 | 16.67% |
Thomas Gleixner | 2 | 0.14% | 1 | 16.67% |
Uwe Kleine-König | 2 | 0.14% | 2 | 33.33% |
Luca Ceresoli | 1 | 0.07% | 1 | 16.67% |
Total | 1416 | 6 |
// SPDX-License-Identifier: GPL-2.0-only /* * Linear Technology LTC4306 and LTC4305 I2C multiplexer/switch * * Copyright (C) 2017 Analog Devices Inc. * * Based on: i2c-mux-pca954x.c * * Datasheet: http://cds.linear.com/docs/en/datasheet/4306.pdf */ #include <linux/gpio/consumer.h> #include <linux/gpio/driver.h> #include <linux/i2c-mux.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/property.h> #include <linux/regmap.h> #include <linux/slab.h> #define LTC4305_MAX_NCHANS 2 #define LTC4306_MAX_NCHANS 4 #define LTC_REG_STATUS 0x0 #define LTC_REG_CONFIG 0x1 #define LTC_REG_MODE 0x2 #define LTC_REG_SWITCH 0x3 #define LTC_DOWNSTREAM_ACCL_EN BIT(6) #define LTC_UPSTREAM_ACCL_EN BIT(7) #define LTC_GPIO_ALL_INPUT 0xC0 #define LTC_SWITCH_MASK 0xF0 enum ltc_type { ltc_4305, ltc_4306, }; struct chip_desc { u8 nchans; u8 num_gpios; }; struct ltc4306 { struct regmap *regmap; struct gpio_chip gpiochip; const struct chip_desc *chip; }; static const struct chip_desc chips[] = { [ltc_4305] = { .nchans = LTC4305_MAX_NCHANS, }, [ltc_4306] = { .nchans = LTC4306_MAX_NCHANS, .num_gpios = 2, }, }; static bool ltc4306_is_volatile_reg(struct device *dev, unsigned int reg) { return (reg == LTC_REG_CONFIG) ? true : false; } static const struct regmap_config ltc4306_regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = LTC_REG_SWITCH, .volatile_reg = ltc4306_is_volatile_reg, .cache_type = REGCACHE_FLAT, }; static int ltc4306_gpio_get(struct gpio_chip *chip, unsigned int offset) { struct ltc4306 *data = gpiochip_get_data(chip); unsigned int val; int ret; ret = regmap_read(data->regmap, LTC_REG_CONFIG, &val); if (ret < 0) return ret; return !!(val & BIT(1 - offset)); } static void ltc4306_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) { struct ltc4306 *data = gpiochip_get_data(chip); regmap_update_bits(data->regmap, LTC_REG_CONFIG, BIT(5 - offset), value ? BIT(5 - offset) : 0); } static int ltc4306_gpio_get_direction(struct gpio_chip *chip, unsigned int offset) { struct ltc4306 *data = gpiochip_get_data(chip); unsigned int val; int ret; ret = regmap_read(data->regmap, LTC_REG_MODE, &val); if (ret < 0) return ret; return !!(val & BIT(7 - offset)); } static int ltc4306_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) { struct ltc4306 *data = gpiochip_get_data(chip); return regmap_update_bits(data->regmap, LTC_REG_MODE, BIT(7 - offset), BIT(7 - offset)); } static int ltc4306_gpio_direction_output(struct gpio_chip *chip, unsigned int offset, int value) { struct ltc4306 *data = gpiochip_get_data(chip); ltc4306_gpio_set(chip, offset, value); return regmap_update_bits(data->regmap, LTC_REG_MODE, BIT(7 - offset), 0); } static int ltc4306_gpio_set_config(struct gpio_chip *chip, unsigned int offset, unsigned long config) { struct ltc4306 *data = gpiochip_get_data(chip); unsigned int val; switch (pinconf_to_config_param(config)) { case PIN_CONFIG_DRIVE_OPEN_DRAIN: val = 0; break; case PIN_CONFIG_DRIVE_PUSH_PULL: val = BIT(4 - offset); break; default: return -ENOTSUPP; } return regmap_update_bits(data->regmap, LTC_REG_MODE, BIT(4 - offset), val); } static int ltc4306_gpio_init(struct ltc4306 *data) { struct device *dev = regmap_get_device(data->regmap); if (!data->chip->num_gpios) return 0; data->gpiochip.label = dev_name(dev); data->gpiochip.base = -1; data->gpiochip.ngpio = data->chip->num_gpios; data->gpiochip.parent = dev; data->gpiochip.can_sleep = true; data->gpiochip.get_direction = ltc4306_gpio_get_direction; data->gpiochip.direction_input = ltc4306_gpio_direction_input; data->gpiochip.direction_output = ltc4306_gpio_direction_output; data->gpiochip.get = ltc4306_gpio_get; data->gpiochip.set = ltc4306_gpio_set; data->gpiochip.set_config = ltc4306_gpio_set_config; data->gpiochip.owner = THIS_MODULE; /* gpiolib assumes all GPIOs default input */ regmap_write(data->regmap, LTC_REG_MODE, LTC_GPIO_ALL_INPUT); return devm_gpiochip_add_data(dev, &data->gpiochip, data); } static int ltc4306_select_mux(struct i2c_mux_core *muxc, u32 chan) { struct ltc4306 *data = i2c_mux_priv(muxc); return regmap_update_bits(data->regmap, LTC_REG_SWITCH, LTC_SWITCH_MASK, BIT(7 - chan)); } static int ltc4306_deselect_mux(struct i2c_mux_core *muxc, u32 chan) { struct ltc4306 *data = i2c_mux_priv(muxc); return regmap_update_bits(data->regmap, LTC_REG_SWITCH, LTC_SWITCH_MASK, 0); } static const struct i2c_device_id ltc4306_id[] = { { "ltc4305", ltc_4305 }, { "ltc4306", ltc_4306 }, { } }; MODULE_DEVICE_TABLE(i2c, ltc4306_id); static const struct of_device_id ltc4306_of_match[] = { { .compatible = "lltc,ltc4305", .data = &chips[ltc_4305] }, { .compatible = "lltc,ltc4306", .data = &chips[ltc_4306] }, { } }; MODULE_DEVICE_TABLE(of, ltc4306_of_match); static int ltc4306_probe(struct i2c_client *client) { struct i2c_adapter *adap = client->adapter; const struct chip_desc *chip; struct i2c_mux_core *muxc; struct ltc4306 *data; struct gpio_desc *gpio; bool idle_disc; unsigned int val = 0; int num, ret; chip = of_device_get_match_data(&client->dev); if (!chip) chip = &chips[i2c_match_id(ltc4306_id, client)->driver_data]; idle_disc = device_property_read_bool(&client->dev, "i2c-mux-idle-disconnect"); muxc = i2c_mux_alloc(adap, &client->dev, chip->nchans, sizeof(*data), I2C_MUX_LOCKED, ltc4306_select_mux, idle_disc ? ltc4306_deselect_mux : NULL); if (!muxc) return -ENOMEM; data = i2c_mux_priv(muxc); data->chip = chip; i2c_set_clientdata(client, muxc); data->regmap = devm_regmap_init_i2c(client, <c4306_regmap_config); if (IS_ERR(data->regmap)) { ret = PTR_ERR(data->regmap); dev_err(&client->dev, "Failed to allocate register map: %d\n", ret); return ret; } /* Reset and enable the mux if an enable GPIO is specified. */ gpio = devm_gpiod_get_optional(&client->dev, "enable", GPIOD_OUT_LOW); if (IS_ERR(gpio)) return PTR_ERR(gpio); if (gpio) { udelay(1); gpiod_set_value(gpio, 1); } /* * Write the mux register at addr to verify * that the mux is in fact present. This also * initializes the mux to disconnected state. */ if (regmap_write(data->regmap, LTC_REG_SWITCH, 0) < 0) { dev_warn(&client->dev, "probe failed\n"); return -ENODEV; } if (device_property_read_bool(&client->dev, "ltc,downstream-accelerators-enable")) val |= LTC_DOWNSTREAM_ACCL_EN; if (device_property_read_bool(&client->dev, "ltc,upstream-accelerators-enable")) val |= LTC_UPSTREAM_ACCL_EN; if (regmap_write(data->regmap, LTC_REG_CONFIG, val) < 0) return -ENODEV; ret = ltc4306_gpio_init(data); if (ret < 0) return ret; /* Now create an adapter for each channel */ for (num = 0; num < chip->nchans; num++) { ret = i2c_mux_add_adapter(muxc, 0, num, 0); if (ret) { i2c_mux_del_adapters(muxc); return ret; } } dev_info(&client->dev, "registered %d multiplexed busses for I2C switch %s\n", num, client->name); return 0; } static void ltc4306_remove(struct i2c_client *client) { struct i2c_mux_core *muxc = i2c_get_clientdata(client); i2c_mux_del_adapters(muxc); } static struct i2c_driver ltc4306_driver = { .driver = { .name = "ltc4306", .of_match_table = of_match_ptr(ltc4306_of_match), }, .probe = ltc4306_probe, .remove = ltc4306_remove, .id_table = ltc4306_id, }; module_i2c_driver(ltc4306_driver); MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); MODULE_DESCRIPTION("Linear Technology LTC4306, LTC4305 I2C mux/switch driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1