Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Martina Krasteva | 4422 | 77.07% | 1 | 9.09% |
Shravan Chippa | 1281 | 22.32% | 4 | 36.36% |
Tomi Valkeinen | 19 | 0.33% | 1 | 9.09% |
Hans Verkuil | 7 | 0.12% | 1 | 9.09% |
Mauro Carvalho Chehab | 6 | 0.10% | 1 | 9.09% |
Uwe Kleine-König | 2 | 0.03% | 2 | 18.18% |
Sakari Ailus | 1 | 0.02% | 1 | 9.09% |
Total | 5738 | 11 |
// SPDX-License-Identifier: GPL-2.0-only /* * Sony imx334 sensor driver * * Copyright (C) 2021 Intel Corporation */ #include <asm/unaligned.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/pm_runtime.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-fwnode.h> #include <media/v4l2-subdev.h> /* Streaming Mode */ #define IMX334_REG_MODE_SELECT 0x3000 #define IMX334_MODE_STANDBY 0x01 #define IMX334_MODE_STREAMING 0x00 /* Lines per frame */ #define IMX334_REG_LPFR 0x3030 /* Chip ID */ #define IMX334_REG_ID 0x3044 #define IMX334_ID 0x1e /* Exposure control */ #define IMX334_REG_SHUTTER 0x3058 #define IMX334_EXPOSURE_MIN 1 #define IMX334_EXPOSURE_OFFSET 5 #define IMX334_EXPOSURE_STEP 1 #define IMX334_EXPOSURE_DEFAULT 0x0648 /* Analog gain control */ #define IMX334_REG_AGAIN 0x30e8 #define IMX334_AGAIN_MIN 0 #define IMX334_AGAIN_MAX 240 #define IMX334_AGAIN_STEP 1 #define IMX334_AGAIN_DEFAULT 0 /* Group hold register */ #define IMX334_REG_HOLD 0x3001 /* Input clock rate */ #define IMX334_INCLK_RATE 24000000 /* CSI2 HW configuration */ #define IMX334_LINK_FREQ_891M 891000000 #define IMX334_LINK_FREQ_445M 445500000 #define IMX334_NUM_DATA_LANES 4 #define IMX334_REG_MIN 0x00 #define IMX334_REG_MAX 0xfffff /** * struct imx334_reg - imx334 sensor register * @address: Register address * @val: Register value */ struct imx334_reg { u16 address; u8 val; }; /** * struct imx334_reg_list - imx334 sensor register list * @num_of_regs: Number of registers in the list * @regs: Pointer to register list */ struct imx334_reg_list { u32 num_of_regs; const struct imx334_reg *regs; }; /** * struct imx334_mode - imx334 sensor mode structure * @width: Frame width * @height: Frame height * @hblank: Horizontal blanking in lines * @vblank: Vertical blanking in lines * @vblank_min: Minimal vertical blanking in lines * @vblank_max: Maximum vertical blanking in lines * @pclk: Sensor pixel clock * @link_freq_idx: Link frequency index * @reg_list: Register list for sensor mode */ struct imx334_mode { u32 width; u32 height; u32 hblank; u32 vblank; u32 vblank_min; u32 vblank_max; u64 pclk; u32 link_freq_idx; struct imx334_reg_list reg_list; }; /** * struct imx334 - imx334 sensor device structure * @dev: Pointer to generic device * @client: Pointer to i2c client * @sd: V4L2 sub-device * @pad: Media pad. Only one pad supported * @reset_gpio: Sensor reset gpio * @inclk: Sensor input clock * @ctrl_handler: V4L2 control handler * @link_freq_ctrl: Pointer to link frequency control * @pclk_ctrl: Pointer to pixel clock control * @hblank_ctrl: Pointer to horizontal blanking control * @vblank_ctrl: Pointer to vertical blanking control * @exp_ctrl: Pointer to exposure control * @again_ctrl: Pointer to analog gain control * @vblank: Vertical blanking in lines * @cur_mode: Pointer to current selected sensor mode * @mutex: Mutex for serializing sensor controls * @menu_skip_mask: Menu skip mask for link_freq_ctrl * @cur_code: current selected format code * @streaming: Flag indicating streaming state */ struct imx334 { struct device *dev; struct i2c_client *client; struct v4l2_subdev sd; struct media_pad pad; struct gpio_desc *reset_gpio; struct clk *inclk; struct v4l2_ctrl_handler ctrl_handler; struct v4l2_ctrl *link_freq_ctrl; struct v4l2_ctrl *pclk_ctrl; struct v4l2_ctrl *hblank_ctrl; struct v4l2_ctrl *vblank_ctrl; struct { struct v4l2_ctrl *exp_ctrl; struct v4l2_ctrl *again_ctrl; }; u32 vblank; const struct imx334_mode *cur_mode; struct mutex mutex; unsigned long menu_skip_mask; u32 cur_code; bool streaming; }; static const s64 link_freq[] = { IMX334_LINK_FREQ_891M, IMX334_LINK_FREQ_445M, }; /* Sensor mode registers for 1920x1080@30fps */ static const struct imx334_reg mode_1920x1080_regs[] = { {0x3000, 0x01}, {0x3018, 0x04}, {0x3030, 0xca}, {0x3031, 0x08}, {0x3032, 0x00}, {0x3034, 0x4c}, {0x3035, 0x04}, {0x302c, 0xf0}, {0x302d, 0x03}, {0x302e, 0x80}, {0x302f, 0x07}, {0x3074, 0xcc}, {0x3075, 0x02}, {0x308e, 0xcd}, {0x308f, 0x02}, {0x3076, 0x38}, {0x3077, 0x04}, {0x3090, 0x38}, {0x3091, 0x04}, {0x3308, 0x38}, {0x3309, 0x04}, {0x30C6, 0x00}, {0x30c7, 0x00}, {0x30ce, 0x00}, {0x30cf, 0x00}, {0x30d8, 0x18}, {0x30d9, 0x0a}, {0x304c, 0x00}, {0x304e, 0x00}, {0x304f, 0x00}, {0x3050, 0x00}, {0x30b6, 0x00}, {0x30b7, 0x00}, {0x3116, 0x08}, {0x3117, 0x00}, {0x31a0, 0x20}, {0x31a1, 0x0f}, {0x300c, 0x3b}, {0x300d, 0x29}, {0x314c, 0x29}, {0x314d, 0x01}, {0x315a, 0x06}, {0x3168, 0xa0}, {0x316a, 0x7e}, {0x319e, 0x02}, {0x3199, 0x00}, {0x319d, 0x00}, {0x31dd, 0x03}, {0x3300, 0x00}, {0x341c, 0xff}, {0x341d, 0x01}, {0x3a01, 0x03}, {0x3a18, 0x7f}, {0x3a19, 0x00}, {0x3a1a, 0x37}, {0x3a1b, 0x00}, {0x3a1c, 0x37}, {0x3a1d, 0x00}, {0x3a1e, 0xf7}, {0x3a1f, 0x00}, {0x3a20, 0x3f}, {0x3a21, 0x00}, {0x3a20, 0x6f}, {0x3a21, 0x00}, {0x3a20, 0x3f}, {0x3a21, 0x00}, {0x3a20, 0x5f}, {0x3a21, 0x00}, {0x3a20, 0x2f}, {0x3a21, 0x00}, {0x3078, 0x02}, {0x3079, 0x00}, {0x307a, 0x00}, {0x307b, 0x00}, {0x3080, 0x02}, {0x3081, 0x00}, {0x3082, 0x00}, {0x3083, 0x00}, {0x3088, 0x02}, {0x3094, 0x00}, {0x3095, 0x00}, {0x3096, 0x00}, {0x309b, 0x02}, {0x309c, 0x00}, {0x309d, 0x00}, {0x309e, 0x00}, {0x30a4, 0x00}, {0x30a5, 0x00}, {0x3288, 0x21}, {0x328a, 0x02}, {0x3414, 0x05}, {0x3416, 0x18}, {0x35Ac, 0x0e}, {0x3648, 0x01}, {0x364a, 0x04}, {0x364c, 0x04}, {0x3678, 0x01}, {0x367c, 0x31}, {0x367e, 0x31}, {0x3708, 0x02}, {0x3714, 0x01}, {0x3715, 0x02}, {0x3716, 0x02}, {0x3717, 0x02}, {0x371c, 0x3d}, {0x371d, 0x3f}, {0x372c, 0x00}, {0x372d, 0x00}, {0x372e, 0x46}, {0x372f, 0x00}, {0x3730, 0x89}, {0x3731, 0x00}, {0x3732, 0x08}, {0x3733, 0x01}, {0x3734, 0xfe}, {0x3735, 0x05}, {0x375d, 0x00}, {0x375e, 0x00}, {0x375f, 0x61}, {0x3760, 0x06}, {0x3768, 0x1b}, {0x3769, 0x1b}, {0x376a, 0x1a}, {0x376b, 0x19}, {0x376c, 0x18}, {0x376d, 0x14}, {0x376e, 0x0f}, {0x3776, 0x00}, {0x3777, 0x00}, {0x3778, 0x46}, {0x3779, 0x00}, {0x377a, 0x08}, {0x377b, 0x01}, {0x377c, 0x45}, {0x377d, 0x01}, {0x377e, 0x23}, {0x377f, 0x02}, {0x3780, 0xd9}, {0x3781, 0x03}, {0x3782, 0xf5}, {0x3783, 0x06}, {0x3784, 0xa5}, {0x3788, 0x0f}, {0x378a, 0xd9}, {0x378b, 0x03}, {0x378c, 0xeb}, {0x378d, 0x05}, {0x378e, 0x87}, {0x378f, 0x06}, {0x3790, 0xf5}, {0x3792, 0x43}, {0x3794, 0x7a}, {0x3796, 0xa1}, {0x37b0, 0x37}, {0x3e04, 0x0e}, {0x30e8, 0x50}, {0x30e9, 0x00}, {0x3e04, 0x0e}, {0x3002, 0x00}, }; /* Sensor mode registers for 3840x2160@30fps */ static const struct imx334_reg mode_3840x2160_regs[] = { {0x3000, 0x01}, {0x3002, 0x00}, {0x3018, 0x04}, {0x37b0, 0x36}, {0x304c, 0x00}, {0x300c, 0x3b}, {0x300d, 0x2a}, {0x3034, 0x26}, {0x3035, 0x02}, {0x314c, 0x29}, {0x314d, 0x01}, {0x315a, 0x02}, {0x3168, 0xa0}, {0x316a, 0x7e}, {0x3288, 0x21}, {0x328a, 0x02}, {0x302c, 0x3c}, {0x302d, 0x00}, {0x302e, 0x00}, {0x302f, 0x0f}, {0x3076, 0x70}, {0x3077, 0x08}, {0x3090, 0x70}, {0x3091, 0x08}, {0x30d8, 0x20}, {0x30d9, 0x12}, {0x3308, 0x70}, {0x3309, 0x08}, {0x3414, 0x05}, {0x3416, 0x18}, {0x35ac, 0x0e}, {0x3648, 0x01}, {0x364a, 0x04}, {0x364c, 0x04}, {0x3678, 0x01}, {0x367c, 0x31}, {0x367e, 0x31}, {0x3708, 0x02}, {0x3714, 0x01}, {0x3715, 0x02}, {0x3716, 0x02}, {0x3717, 0x02}, {0x371c, 0x3d}, {0x371d, 0x3f}, {0x372c, 0x00}, {0x372d, 0x00}, {0x372e, 0x46}, {0x372f, 0x00}, {0x3730, 0x89}, {0x3731, 0x00}, {0x3732, 0x08}, {0x3733, 0x01}, {0x3734, 0xfe}, {0x3735, 0x05}, {0x375d, 0x00}, {0x375e, 0x00}, {0x375f, 0x61}, {0x3760, 0x06}, {0x3768, 0x1b}, {0x3769, 0x1b}, {0x376a, 0x1a}, {0x376b, 0x19}, {0x376c, 0x18}, {0x376d, 0x14}, {0x376e, 0x0f}, {0x3776, 0x00}, {0x3777, 0x00}, {0x3778, 0x46}, {0x3779, 0x00}, {0x377a, 0x08}, {0x377b, 0x01}, {0x377c, 0x45}, {0x377d, 0x01}, {0x377e, 0x23}, {0x377f, 0x02}, {0x3780, 0xd9}, {0x3781, 0x03}, {0x3782, 0xf5}, {0x3783, 0x06}, {0x3784, 0xa5}, {0x3788, 0x0f}, {0x378a, 0xd9}, {0x378b, 0x03}, {0x378c, 0xeb}, {0x378d, 0x05}, {0x378e, 0x87}, {0x378f, 0x06}, {0x3790, 0xf5}, {0x3792, 0x43}, {0x3794, 0x7a}, {0x3796, 0xa1}, {0x3e04, 0x0e}, {0x319e, 0x00}, {0x3a00, 0x01}, {0x3a18, 0xbf}, {0x3a19, 0x00}, {0x3a1a, 0x67}, {0x3a1b, 0x00}, {0x3a1c, 0x6f}, {0x3a1d, 0x00}, {0x3a1e, 0xd7}, {0x3a1f, 0x01}, {0x3a20, 0x6f}, {0x3a21, 0x00}, {0x3a22, 0xcf}, {0x3a23, 0x00}, {0x3a24, 0x6f}, {0x3a25, 0x00}, {0x3a26, 0xb7}, {0x3a27, 0x00}, {0x3a28, 0x5f}, {0x3a29, 0x00}, }; static const struct imx334_reg raw10_framefmt_regs[] = { {0x3050, 0x00}, {0x319d, 0x00}, {0x341c, 0xff}, {0x341d, 0x01}, }; static const struct imx334_reg raw12_framefmt_regs[] = { {0x3050, 0x01}, {0x319d, 0x01}, {0x341c, 0x47}, {0x341d, 0x00}, }; static const u32 imx334_mbus_codes[] = { MEDIA_BUS_FMT_SRGGB12_1X12, MEDIA_BUS_FMT_SRGGB10_1X10, }; /* Supported sensor mode configurations */ static const struct imx334_mode supported_modes[] = { { .width = 3840, .height = 2160, .hblank = 560, .vblank = 2340, .vblank_min = 90, .vblank_max = 132840, .pclk = 594000000, .link_freq_idx = 0, .reg_list = { .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs), .regs = mode_3840x2160_regs, }, }, { .width = 1920, .height = 1080, .hblank = 2480, .vblank = 1170, .vblank_min = 45, .vblank_max = 132840, .pclk = 297000000, .link_freq_idx = 1, .reg_list = { .num_of_regs = ARRAY_SIZE(mode_1920x1080_regs), .regs = mode_1920x1080_regs, }, }, }; /** * to_imx334() - imv334 V4L2 sub-device to imx334 device. * @subdev: pointer to imx334 V4L2 sub-device * * Return: pointer to imx334 device */ static inline struct imx334 *to_imx334(struct v4l2_subdev *subdev) { return container_of(subdev, struct imx334, sd); } /** * imx334_read_reg() - Read registers. * @imx334: pointer to imx334 device * @reg: register address * @len: length of bytes to read. Max supported bytes is 4 * @val: pointer to register value to be filled. * * Big endian register addresses with little endian values. * * Return: 0 if successful, error code otherwise. */ static int imx334_read_reg(struct imx334 *imx334, u16 reg, u32 len, u32 *val) { struct i2c_client *client = v4l2_get_subdevdata(&imx334->sd); struct i2c_msg msgs[2] = {0}; u8 addr_buf[2] = {0}; u8 data_buf[4] = {0}; int ret; if (WARN_ON(len > 4)) return -EINVAL; put_unaligned_be16(reg, addr_buf); /* Write register address */ msgs[0].addr = client->addr; msgs[0].flags = 0; msgs[0].len = ARRAY_SIZE(addr_buf); msgs[0].buf = addr_buf; /* Read data from register */ msgs[1].addr = client->addr; msgs[1].flags = I2C_M_RD; msgs[1].len = len; msgs[1].buf = data_buf; ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); if (ret != ARRAY_SIZE(msgs)) return -EIO; *val = get_unaligned_le32(data_buf); return 0; } /** * imx334_write_reg() - Write register * @imx334: pointer to imx334 device * @reg: register address * @len: length of bytes. Max supported bytes is 4 * @val: register value * * Big endian register addresses with little endian values. * * Return: 0 if successful, error code otherwise. */ static int imx334_write_reg(struct imx334 *imx334, u16 reg, u32 len, u32 val) { struct i2c_client *client = v4l2_get_subdevdata(&imx334->sd); u8 buf[6] = {0}; if (WARN_ON(len > 4)) return -EINVAL; put_unaligned_be16(reg, buf); put_unaligned_le32(val, buf + 2); if (i2c_master_send(client, buf, len + 2) != len + 2) return -EIO; return 0; } /** * imx334_write_regs() - Write a list of registers * @imx334: pointer to imx334 device * @regs: list of registers to be written * @len: length of registers array * * Return: 0 if successful, error code otherwise. */ static int imx334_write_regs(struct imx334 *imx334, const struct imx334_reg *regs, u32 len) { unsigned int i; int ret; for (i = 0; i < len; i++) { ret = imx334_write_reg(imx334, regs[i].address, 1, regs[i].val); if (ret) return ret; } return 0; } /** * imx334_update_controls() - Update control ranges based on streaming mode * @imx334: pointer to imx334 device * @mode: pointer to imx334_mode sensor mode * * Return: 0 if successful, error code otherwise. */ static int imx334_update_controls(struct imx334 *imx334, const struct imx334_mode *mode) { int ret; ret = __v4l2_ctrl_s_ctrl(imx334->link_freq_ctrl, mode->link_freq_idx); if (ret) return ret; ret = __v4l2_ctrl_modify_range(imx334->pclk_ctrl, mode->pclk, mode->pclk, 1, mode->pclk); if (ret) return ret; ret = __v4l2_ctrl_modify_range(imx334->hblank_ctrl, mode->hblank, mode->hblank, 1, mode->hblank); if (ret) return ret; ret = __v4l2_ctrl_modify_range(imx334->vblank_ctrl, mode->vblank_min, mode->vblank_max, 1, mode->vblank); if (ret) return ret; return __v4l2_ctrl_s_ctrl(imx334->vblank_ctrl, mode->vblank); } /** * imx334_update_exp_gain() - Set updated exposure and gain * @imx334: pointer to imx334 device * @exposure: updated exposure value * @gain: updated analog gain value * * Return: 0 if successful, error code otherwise. */ static int imx334_update_exp_gain(struct imx334 *imx334, u32 exposure, u32 gain) { u32 lpfr, shutter; int ret; lpfr = imx334->vblank + imx334->cur_mode->height; shutter = lpfr - exposure; dev_dbg(imx334->dev, "Set long exp %u analog gain %u sh0 %u lpfr %u", exposure, gain, shutter, lpfr); ret = imx334_write_reg(imx334, IMX334_REG_HOLD, 1, 1); if (ret) return ret; ret = imx334_write_reg(imx334, IMX334_REG_LPFR, 3, lpfr); if (ret) goto error_release_group_hold; ret = imx334_write_reg(imx334, IMX334_REG_SHUTTER, 3, shutter); if (ret) goto error_release_group_hold; ret = imx334_write_reg(imx334, IMX334_REG_AGAIN, 1, gain); error_release_group_hold: imx334_write_reg(imx334, IMX334_REG_HOLD, 1, 0); return ret; } /** * imx334_set_ctrl() - Set subdevice control * @ctrl: pointer to v4l2_ctrl structure * * Supported controls: * - V4L2_CID_VBLANK * - cluster controls: * - V4L2_CID_ANALOGUE_GAIN * - V4L2_CID_EXPOSURE * * Return: 0 if successful, error code otherwise. */ static int imx334_set_ctrl(struct v4l2_ctrl *ctrl) { struct imx334 *imx334 = container_of(ctrl->handler, struct imx334, ctrl_handler); u32 analog_gain; u32 exposure; int ret; switch (ctrl->id) { case V4L2_CID_VBLANK: imx334->vblank = imx334->vblank_ctrl->val; dev_dbg(imx334->dev, "Received vblank %u, new lpfr %u", imx334->vblank, imx334->vblank + imx334->cur_mode->height); ret = __v4l2_ctrl_modify_range(imx334->exp_ctrl, IMX334_EXPOSURE_MIN, imx334->vblank + imx334->cur_mode->height - IMX334_EXPOSURE_OFFSET, 1, IMX334_EXPOSURE_DEFAULT); break; case V4L2_CID_EXPOSURE: /* Set controls only if sensor is in power on state */ if (!pm_runtime_get_if_in_use(imx334->dev)) return 0; exposure = ctrl->val; analog_gain = imx334->again_ctrl->val; dev_dbg(imx334->dev, "Received exp %u analog gain %u", exposure, analog_gain); ret = imx334_update_exp_gain(imx334, exposure, analog_gain); pm_runtime_put(imx334->dev); break; case V4L2_CID_PIXEL_RATE: case V4L2_CID_LINK_FREQ: case V4L2_CID_HBLANK: ret = 0; break; default: dev_err(imx334->dev, "Invalid control %d", ctrl->id); ret = -EINVAL; } return ret; } /* V4l2 subdevice control ops*/ static const struct v4l2_ctrl_ops imx334_ctrl_ops = { .s_ctrl = imx334_set_ctrl, }; static int imx334_get_format_code(struct imx334 *imx334, u32 code) { unsigned int i; for (i = 0; i < ARRAY_SIZE(imx334_mbus_codes); i++) { if (imx334_mbus_codes[i] == code) return imx334_mbus_codes[i]; } return imx334_mbus_codes[0]; } /** * imx334_enum_mbus_code() - Enumerate V4L2 sub-device mbus codes * @sd: pointer to imx334 V4L2 sub-device structure * @sd_state: V4L2 sub-device state * @code: V4L2 sub-device code enumeration need to be filled * * Return: 0 if successful, error code otherwise. */ static int imx334_enum_mbus_code(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_mbus_code_enum *code) { if (code->index >= ARRAY_SIZE(imx334_mbus_codes)) return -EINVAL; code->code = imx334_mbus_codes[code->index]; return 0; } /** * imx334_enum_frame_size() - Enumerate V4L2 sub-device frame sizes * @sd: pointer to imx334 V4L2 sub-device structure * @sd_state: V4L2 sub-device state * @fsize: V4L2 sub-device size enumeration need to be filled * * Return: 0 if successful, error code otherwise. */ static int imx334_enum_frame_size(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_frame_size_enum *fsize) { struct imx334 *imx334 = to_imx334(sd); u32 code; if (fsize->index >= ARRAY_SIZE(supported_modes)) return -EINVAL; code = imx334_get_format_code(imx334, fsize->code); if (fsize->code != code) return -EINVAL; fsize->min_width = supported_modes[fsize->index].width; fsize->max_width = fsize->min_width; fsize->min_height = supported_modes[fsize->index].height; fsize->max_height = fsize->min_height; return 0; } /** * imx334_fill_pad_format() - Fill subdevice pad format * from selected sensor mode * @imx334: pointer to imx334 device * @mode: pointer to imx334_mode sensor mode * @fmt: V4L2 sub-device format need to be filled */ static void imx334_fill_pad_format(struct imx334 *imx334, const struct imx334_mode *mode, struct v4l2_subdev_format *fmt) { fmt->format.width = mode->width; fmt->format.height = mode->height; fmt->format.field = V4L2_FIELD_NONE; fmt->format.colorspace = V4L2_COLORSPACE_RAW; fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; fmt->format.quantization = V4L2_QUANTIZATION_DEFAULT; fmt->format.xfer_func = V4L2_XFER_FUNC_NONE; } /** * imx334_get_pad_format() - Get subdevice pad format * @sd: pointer to imx334 V4L2 sub-device structure * @sd_state: V4L2 sub-device state * @fmt: V4L2 sub-device format need to be set * * Return: 0 if successful, error code otherwise. */ static int imx334_get_pad_format(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_format *fmt) { struct imx334 *imx334 = to_imx334(sd); mutex_lock(&imx334->mutex); if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { struct v4l2_mbus_framefmt *framefmt; framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); fmt->format = *framefmt; } else { fmt->format.code = imx334->cur_code; imx334_fill_pad_format(imx334, imx334->cur_mode, fmt); } mutex_unlock(&imx334->mutex); return 0; } /** * imx334_set_pad_format() - Set subdevice pad format * @sd: pointer to imx334 V4L2 sub-device structure * @sd_state: V4L2 sub-device state * @fmt: V4L2 sub-device format need to be set * * Return: 0 if successful, error code otherwise. */ static int imx334_set_pad_format(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_format *fmt) { struct imx334 *imx334 = to_imx334(sd); const struct imx334_mode *mode; int ret = 0; mutex_lock(&imx334->mutex); mode = v4l2_find_nearest_size(supported_modes, ARRAY_SIZE(supported_modes), width, height, fmt->format.width, fmt->format.height); imx334_fill_pad_format(imx334, mode, fmt); fmt->format.code = imx334_get_format_code(imx334, fmt->format.code); if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { struct v4l2_mbus_framefmt *framefmt; framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); *framefmt = fmt->format; } else if (imx334->cur_mode != mode || imx334->cur_code != fmt->format.code) { imx334->cur_code = fmt->format.code; ret = imx334_update_controls(imx334, mode); if (!ret) imx334->cur_mode = mode; } mutex_unlock(&imx334->mutex); return ret; } /** * imx334_init_pad_cfg() - Initialize sub-device pad configuration * @sd: pointer to imx334 V4L2 sub-device structure * @sd_state: V4L2 sub-device state * * Return: 0 if successful, error code otherwise. */ static int imx334_init_pad_cfg(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state) { struct imx334 *imx334 = to_imx334(sd); struct v4l2_subdev_format fmt = { 0 }; fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; mutex_lock(&imx334->mutex); imx334_fill_pad_format(imx334, imx334->cur_mode, &fmt); __v4l2_ctrl_modify_range(imx334->link_freq_ctrl, 0, __fls(imx334->menu_skip_mask), ~(imx334->menu_skip_mask), __ffs(imx334->menu_skip_mask)); mutex_unlock(&imx334->mutex); return imx334_set_pad_format(sd, sd_state, &fmt); } static int imx334_set_framefmt(struct imx334 *imx334) { switch (imx334->cur_code) { case MEDIA_BUS_FMT_SRGGB10_1X10: return imx334_write_regs(imx334, raw10_framefmt_regs, ARRAY_SIZE(raw10_framefmt_regs)); case MEDIA_BUS_FMT_SRGGB12_1X12: return imx334_write_regs(imx334, raw12_framefmt_regs, ARRAY_SIZE(raw12_framefmt_regs)); } return -EINVAL; } /** * imx334_start_streaming() - Start sensor stream * @imx334: pointer to imx334 device * * Return: 0 if successful, error code otherwise. */ static int imx334_start_streaming(struct imx334 *imx334) { const struct imx334_reg_list *reg_list; int ret; /* Write sensor mode registers */ reg_list = &imx334->cur_mode->reg_list; ret = imx334_write_regs(imx334, reg_list->regs, reg_list->num_of_regs); if (ret) { dev_err(imx334->dev, "fail to write initial registers"); return ret; } ret = imx334_set_framefmt(imx334); if (ret) { dev_err(imx334->dev, "%s failed to set frame format: %d\n", __func__, ret); return ret; } /* Setup handler will write actual exposure and gain */ ret = __v4l2_ctrl_handler_setup(imx334->sd.ctrl_handler); if (ret) { dev_err(imx334->dev, "fail to setup handler"); return ret; } /* Start streaming */ ret = imx334_write_reg(imx334, IMX334_REG_MODE_SELECT, 1, IMX334_MODE_STREAMING); if (ret) { dev_err(imx334->dev, "fail to start streaming"); return ret; } return 0; } /** * imx334_stop_streaming() - Stop sensor stream * @imx334: pointer to imx334 device * * Return: 0 if successful, error code otherwise. */ static int imx334_stop_streaming(struct imx334 *imx334) { return imx334_write_reg(imx334, IMX334_REG_MODE_SELECT, 1, IMX334_MODE_STANDBY); } /** * imx334_set_stream() - Enable sensor streaming * @sd: pointer to imx334 subdevice * @enable: set to enable sensor streaming * * Return: 0 if successful, error code otherwise. */ static int imx334_set_stream(struct v4l2_subdev *sd, int enable) { struct imx334 *imx334 = to_imx334(sd); int ret; mutex_lock(&imx334->mutex); if (imx334->streaming == enable) { mutex_unlock(&imx334->mutex); return 0; } if (enable) { ret = pm_runtime_resume_and_get(imx334->dev); if (ret < 0) goto error_unlock; ret = imx334_start_streaming(imx334); if (ret) goto error_power_off; } else { imx334_stop_streaming(imx334); pm_runtime_put(imx334->dev); } imx334->streaming = enable; mutex_unlock(&imx334->mutex); return 0; error_power_off: pm_runtime_put(imx334->dev); error_unlock: mutex_unlock(&imx334->mutex); return ret; } /** * imx334_detect() - Detect imx334 sensor * @imx334: pointer to imx334 device * * Return: 0 if successful, -EIO if sensor id does not match */ static int imx334_detect(struct imx334 *imx334) { int ret; u32 val; ret = imx334_read_reg(imx334, IMX334_REG_ID, 2, &val); if (ret) return ret; if (val != IMX334_ID) { dev_err(imx334->dev, "chip id mismatch: %x!=%x", IMX334_ID, val); return -ENXIO; } return 0; } /** * imx334_parse_hw_config() - Parse HW configuration and check if supported * @imx334: pointer to imx334 device * * Return: 0 if successful, error code otherwise. */ static int imx334_parse_hw_config(struct imx334 *imx334) { struct fwnode_handle *fwnode = dev_fwnode(imx334->dev); struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = V4L2_MBUS_CSI2_DPHY }; struct fwnode_handle *ep; unsigned long rate; unsigned int i, j; int ret; if (!fwnode) return -ENXIO; /* Request optional reset pin */ imx334->reset_gpio = devm_gpiod_get_optional(imx334->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(imx334->reset_gpio)) { dev_err(imx334->dev, "failed to get reset gpio %ld", PTR_ERR(imx334->reset_gpio)); return PTR_ERR(imx334->reset_gpio); } /* Get sensor input clock */ imx334->inclk = devm_clk_get(imx334->dev, NULL); if (IS_ERR(imx334->inclk)) { dev_err(imx334->dev, "could not get inclk"); return PTR_ERR(imx334->inclk); } rate = clk_get_rate(imx334->inclk); if (rate != IMX334_INCLK_RATE) { dev_err(imx334->dev, "inclk frequency mismatch"); return -EINVAL; } ep = fwnode_graph_get_next_endpoint(fwnode, NULL); if (!ep) return -ENXIO; ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); fwnode_handle_put(ep); if (ret) return ret; if (bus_cfg.bus.mipi_csi2.num_data_lanes != IMX334_NUM_DATA_LANES) { dev_err(imx334->dev, "number of CSI2 data lanes %d is not supported", bus_cfg.bus.mipi_csi2.num_data_lanes); ret = -EINVAL; goto done_endpoint_free; } if (!bus_cfg.nr_of_link_frequencies) { dev_err(imx334->dev, "no link frequencies defined"); ret = -EINVAL; goto done_endpoint_free; } for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++) { for (j = 0; j < ARRAY_SIZE(link_freq); j++) { if (bus_cfg.link_frequencies[i] == link_freq[j]) { set_bit(j, &imx334->menu_skip_mask); break; } } if (j == ARRAY_SIZE(link_freq)) { ret = dev_err_probe(imx334->dev, -EINVAL, "no supported link freq found\n"); goto done_endpoint_free; } } done_endpoint_free: v4l2_fwnode_endpoint_free(&bus_cfg); return ret; } /* V4l2 subdevice ops */ static const struct v4l2_subdev_video_ops imx334_video_ops = { .s_stream = imx334_set_stream, }; static const struct v4l2_subdev_pad_ops imx334_pad_ops = { .init_cfg = imx334_init_pad_cfg, .enum_mbus_code = imx334_enum_mbus_code, .enum_frame_size = imx334_enum_frame_size, .get_fmt = imx334_get_pad_format, .set_fmt = imx334_set_pad_format, }; static const struct v4l2_subdev_ops imx334_subdev_ops = { .video = &imx334_video_ops, .pad = &imx334_pad_ops, }; /** * imx334_power_on() - Sensor power on sequence * @dev: pointer to i2c device * * Return: 0 if successful, error code otherwise. */ static int imx334_power_on(struct device *dev) { struct v4l2_subdev *sd = dev_get_drvdata(dev); struct imx334 *imx334 = to_imx334(sd); int ret; gpiod_set_value_cansleep(imx334->reset_gpio, 1); ret = clk_prepare_enable(imx334->inclk); if (ret) { dev_err(imx334->dev, "fail to enable inclk"); goto error_reset; } usleep_range(18000, 20000); return 0; error_reset: gpiod_set_value_cansleep(imx334->reset_gpio, 0); return ret; } /** * imx334_power_off() - Sensor power off sequence * @dev: pointer to i2c device * * Return: 0 if successful, error code otherwise. */ static int imx334_power_off(struct device *dev) { struct v4l2_subdev *sd = dev_get_drvdata(dev); struct imx334 *imx334 = to_imx334(sd); gpiod_set_value_cansleep(imx334->reset_gpio, 0); clk_disable_unprepare(imx334->inclk); return 0; } /** * imx334_init_controls() - Initialize sensor subdevice controls * @imx334: pointer to imx334 device * * Return: 0 if successful, error code otherwise. */ static int imx334_init_controls(struct imx334 *imx334) { struct v4l2_ctrl_handler *ctrl_hdlr = &imx334->ctrl_handler; const struct imx334_mode *mode = imx334->cur_mode; u32 lpfr; int ret; ret = v4l2_ctrl_handler_init(ctrl_hdlr, 6); if (ret) return ret; /* Serialize controls with sensor device */ ctrl_hdlr->lock = &imx334->mutex; /* Initialize exposure and gain */ lpfr = mode->vblank + mode->height; imx334->exp_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, &imx334_ctrl_ops, V4L2_CID_EXPOSURE, IMX334_EXPOSURE_MIN, lpfr - IMX334_EXPOSURE_OFFSET, IMX334_EXPOSURE_STEP, IMX334_EXPOSURE_DEFAULT); imx334->again_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, &imx334_ctrl_ops, V4L2_CID_ANALOGUE_GAIN, IMX334_AGAIN_MIN, IMX334_AGAIN_MAX, IMX334_AGAIN_STEP, IMX334_AGAIN_DEFAULT); v4l2_ctrl_cluster(2, &imx334->exp_ctrl); imx334->vblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, &imx334_ctrl_ops, V4L2_CID_VBLANK, mode->vblank_min, mode->vblank_max, 1, mode->vblank); /* Read only controls */ imx334->pclk_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, &imx334_ctrl_ops, V4L2_CID_PIXEL_RATE, mode->pclk, mode->pclk, 1, mode->pclk); imx334->link_freq_ctrl = v4l2_ctrl_new_int_menu(ctrl_hdlr, &imx334_ctrl_ops, V4L2_CID_LINK_FREQ, __fls(imx334->menu_skip_mask), __ffs(imx334->menu_skip_mask), link_freq); if (imx334->link_freq_ctrl) imx334->link_freq_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; imx334->hblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, &imx334_ctrl_ops, V4L2_CID_HBLANK, IMX334_REG_MIN, IMX334_REG_MAX, 1, mode->hblank); if (imx334->hblank_ctrl) imx334->hblank_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; if (ctrl_hdlr->error) { dev_err(imx334->dev, "control init failed: %d", ctrl_hdlr->error); v4l2_ctrl_handler_free(ctrl_hdlr); return ctrl_hdlr->error; } imx334->sd.ctrl_handler = ctrl_hdlr; return 0; } /** * imx334_probe() - I2C client device binding * @client: pointer to i2c client device * * Return: 0 if successful, error code otherwise. */ static int imx334_probe(struct i2c_client *client) { struct imx334 *imx334; int ret; imx334 = devm_kzalloc(&client->dev, sizeof(*imx334), GFP_KERNEL); if (!imx334) return -ENOMEM; imx334->dev = &client->dev; /* Initialize subdev */ v4l2_i2c_subdev_init(&imx334->sd, client, &imx334_subdev_ops); ret = imx334_parse_hw_config(imx334); if (ret) { dev_err(imx334->dev, "HW configuration is not supported"); return ret; } mutex_init(&imx334->mutex); ret = imx334_power_on(imx334->dev); if (ret) { dev_err(imx334->dev, "failed to power-on the sensor"); goto error_mutex_destroy; } /* Check module identity */ ret = imx334_detect(imx334); if (ret) { dev_err(imx334->dev, "failed to find sensor: %d", ret); goto error_power_off; } /* Set default mode to max resolution */ imx334->cur_mode = &supported_modes[__ffs(imx334->menu_skip_mask)]; imx334->cur_code = imx334_mbus_codes[0]; imx334->vblank = imx334->cur_mode->vblank; ret = imx334_init_controls(imx334); if (ret) { dev_err(imx334->dev, "failed to init controls: %d", ret); goto error_power_off; } /* Initialize subdev */ imx334->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; imx334->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; /* Initialize source pad */ imx334->pad.flags = MEDIA_PAD_FL_SOURCE; ret = media_entity_pads_init(&imx334->sd.entity, 1, &imx334->pad); if (ret) { dev_err(imx334->dev, "failed to init entity pads: %d", ret); goto error_handler_free; } ret = v4l2_async_register_subdev_sensor(&imx334->sd); if (ret < 0) { dev_err(imx334->dev, "failed to register async subdev: %d", ret); goto error_media_entity; } pm_runtime_set_active(imx334->dev); pm_runtime_enable(imx334->dev); pm_runtime_idle(imx334->dev); return 0; error_media_entity: media_entity_cleanup(&imx334->sd.entity); error_handler_free: v4l2_ctrl_handler_free(imx334->sd.ctrl_handler); error_power_off: imx334_power_off(imx334->dev); error_mutex_destroy: mutex_destroy(&imx334->mutex); return ret; } /** * imx334_remove() - I2C client device unbinding * @client: pointer to I2C client device * * Return: 0 if successful, error code otherwise. */ static void imx334_remove(struct i2c_client *client) { struct v4l2_subdev *sd = i2c_get_clientdata(client); struct imx334 *imx334 = to_imx334(sd); v4l2_async_unregister_subdev(sd); media_entity_cleanup(&sd->entity); v4l2_ctrl_handler_free(sd->ctrl_handler); pm_runtime_disable(&client->dev); pm_runtime_suspended(&client->dev); mutex_destroy(&imx334->mutex); } static const struct dev_pm_ops imx334_pm_ops = { SET_RUNTIME_PM_OPS(imx334_power_off, imx334_power_on, NULL) }; static const struct of_device_id imx334_of_match[] = { { .compatible = "sony,imx334" }, { } }; MODULE_DEVICE_TABLE(of, imx334_of_match); static struct i2c_driver imx334_driver = { .probe = imx334_probe, .remove = imx334_remove, .driver = { .name = "imx334", .pm = &imx334_pm_ops, .of_match_table = imx334_of_match, }, }; module_i2c_driver(imx334_driver); MODULE_DESCRIPTION("Sony imx334 sensor driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1